From b9a008b6f59e160012669fdcfe543eb97b73a8e0 Mon Sep 17 00:00:00 2001 From: Heidi Nettelbeck Date: Tue, 4 Jul 2023 11:55:32 +1000 Subject: [PATCH 01/10] edited bgc_land.md --- docs/models/model_components/bgc_land.md | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/docs/models/model_components/bgc_land.md b/docs/models/model_components/bgc_land.md index 3b0b96130..c82c90a7c 100644 --- a/docs/models/model_components/bgc_land.md +++ b/docs/models/model_components/bgc_land.md @@ -9,12 +9,12 @@ ##
[CASA-CNP][casa-web] {{ supported }}
-CASA (Carnegie-Ames-Stanford Approach)-CNP (Carbon-Nitrogen-Phosphorous) is the land biogeochemistry model developed in CABLE. - -CASA-CNP models the dynamics of carbon pools and nitrogen and phosphorous limitations. It is directly coupled with the CABLE land surface model. +[CASA-CNP][casa-web], the Carnegie-Ames-Stanford Approach with Carbon-Nitrogen-Phosphorus, is the biogeochemical module implemented in the ACCESS land surface model [CABLE][cable-wiki]. It models the dynamics of carbon pools and the dependance of carbon uptake due to nitrogen and phosphorous limitations. + ### How is CASA-CNP used? -CASA-CNP is switched on for carbon-cycle to use in the ACCESS-ESM1.5 model. +In the ACCESS-ESM1.5 model, CASA-CNP is enabled within CABLE for simulation of the carbon-cycle. -[casa-web]: https://carbonwaterobservatory.csiro.au/casa.html \ No newline at end of file +[casa-web]: https://carbonwaterobservatory.csiro.au/casa.html +[cable-wiki]: https://trac.nci.org.au/trac/cable/wiki \ No newline at end of file From 0f2eb18eab13c9fff21e1997057f4983851f9bfa Mon Sep 17 00:00:00 2001 From: Heidi Nettelbeck Date: Wed, 5 Jul 2023 14:53:50 +1000 Subject: [PATCH 02/10] edited coupler.md --- docs/models/model_components/coupler.md | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/docs/models/model_components/coupler.md b/docs/models/model_components/coupler.md index fa0ce2f9a..f96cc7c7b 100644 --- a/docs/models/model_components/coupler.md +++ b/docs/models/model_components/coupler.md @@ -4,20 +4,21 @@ -A coupler is a software used to perform simulations with different model components at the same time. The coupler enables the different model components to exchange information during the simulation. +A coupler is a software that allows synchronised exchanges of coupling information between numerical codes representing different components of the climate system. ##
[OASIS3-MCT][OASIS3-MCT] {{ supported }}
-OASIS3-MCT consists of the OASIS coupler interfaced with the Model Coupling Toolkit (MCT) from the Argonne National Laboratory. OASIS3-MCT is the coupler used for: - +[OASIS3-MCT][OASIS3-MCT] is the version of the Ocean Atmosphere Sea Ice Soil (OASIS) coupler interfaced with the Model Coupling Toolkit (MCT) from the Argonne National Laboratory. OASIS3-MCT is the coupler used in the configurations: - ACCESS-ESM1.5 -- ACCESS-CM2 +- ACCESS-CM2 - ACCESS-OM2 -- ACCESS-S1 +- ACCESS-S + +##
[NUOPC Interoperability Layer][NUOPC-int-layer] {{ recommended }}
-##
[NUOPC interoperability layer][NUOPC] {{ recommended }}
+[NUOPC][NUOPC-int-layer] (National Unified Operational Prediction Capability) Interoperability Layer defines conventions and a set of generic components for building coupled models using the Earth System Modeling Framework (ESMF). -The NUOPC interoperability layer is distributed via the Earth System Modelling Framework (ESMF). It is a coupler developed by the National Unified Operational Prediction Capability (NUOPC), a consortium of Navy (USA), NOAA and Air Force (USA) modelers. +ACCESS-OM3, a configuration currently under development, uses NUOPC to couple its MOM6 and CICE6 model components as there are no respective OASIS coupling interfaces for these components. [OASIS3-MCT]: https://oasis.cerfacs.fr/en/ -[NUOPC]: https://earthsystemmodeling.org/nuopc/ \ No newline at end of file +[NUOPC-int-layer]: https://earthsystemmodeling.org/nuopc/ \ No newline at end of file From 53d28f7dc38a7758870eb82f69e1e1b96151d147 Mon Sep 17 00:00:00 2001 From: Heidi Nettelbeck <117064039+heidinett@users.noreply.github.com> Date: Mon, 10 Jul 2023 09:57:02 +1000 Subject: [PATCH 03/10] Update docs/models/model_components/bgc_land.md Co-authored-by: Claire Carouge --- docs/models/model_components/bgc_land.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/models/model_components/bgc_land.md b/docs/models/model_components/bgc_land.md index c82c90a7c..0d758ae27 100644 --- a/docs/models/model_components/bgc_land.md +++ b/docs/models/model_components/bgc_land.md @@ -14,7 +14,7 @@ ### How is CASA-CNP used? -In the ACCESS-ESM1.5 model, CASA-CNP is enabled within CABLE for simulation of the carbon-cycle. +In the ACCESS-ESM1.5 model, CASA-CNP is enabled within CABLE for the simulation of the carbon cycle. [casa-web]: https://carbonwaterobservatory.csiro.au/casa.html [cable-wiki]: https://trac.nci.org.au/trac/cable/wiki \ No newline at end of file From 80baf6f7fb96cab7d95e28890d6264766c0e434b Mon Sep 17 00:00:00 2001 From: Heidi Nettelbeck Date: Mon, 10 Jul 2023 12:37:38 +1000 Subject: [PATCH 04/10] added om3 coupler link and fixed list format, text --- docs/models/model_components/coupler.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/docs/models/model_components/coupler.md b/docs/models/model_components/coupler.md index f96cc7c7b..6d77e9d8d 100644 --- a/docs/models/model_components/coupler.md +++ b/docs/models/model_components/coupler.md @@ -4,11 +4,12 @@ -A coupler is a software that allows synchronised exchanges of coupling information between numerical codes representing different components of the climate system. +A coupler is a software package that allows synchronised exchanges of coupling information between numerical codes representing different components of the climate system. ##
[OASIS3-MCT][OASIS3-MCT] {{ supported }}
[OASIS3-MCT][OASIS3-MCT] is the version of the Ocean Atmosphere Sea Ice Soil (OASIS) coupler interfaced with the Model Coupling Toolkit (MCT) from the Argonne National Laboratory. OASIS3-MCT is the coupler used in the configurations: + - ACCESS-ESM1.5 - ACCESS-CM2 - ACCESS-OM2 @@ -18,7 +19,8 @@ A coupler is a software that allows synchronised exchanges of coupling informati [NUOPC][NUOPC-int-layer] (National Unified Operational Prediction Capability) Interoperability Layer defines conventions and a set of generic components for building coupled models using the Earth System Modeling Framework (ESMF). -ACCESS-OM3, a configuration currently under development, uses NUOPC to couple its MOM6 and CICE6 model components as there are no respective OASIS coupling interfaces for these components. +ACCESS-OM3, a configuration currently under development, uses [NUOPC to couple its MOM6 and CICE6 model components][coupler-choice] as there are no respective OASIS coupling interfaces for these components. [OASIS3-MCT]: https://oasis.cerfacs.fr/en/ -[NUOPC-int-layer]: https://earthsystemmodeling.org/nuopc/ \ No newline at end of file +[NUOPC-int-layer]: https://earthsystemmodeling.org/nuopc/ +[coupler-choice]: https://github.com/COSIMA/access-om3/discussions/7 \ No newline at end of file From 0aec4ecdf7ceb05c8dfea50d5b440fc64a4f1b55 Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 13:36:15 +1000 Subject: [PATCH 05/10] :rotating_light: (#410): Fixed the training link on community resources --- docs/community_resources/index.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/community_resources/index.md b/docs/community_resources/index.md index eafb4dd00..afbc453e1 100644 --- a/docs/community_resources/index.md +++ b/docs/community_resources/index.md @@ -9,5 +9,5 @@ Currently, we provide pointers to the following categories: - [Glossaries](./glossaries/index.md) - [Variables](./glossaries/glossary_cmip.md) - [Model Evaluation Links](community_model_catalogs) -- [Training](../training/index.md) +- [Training](training/) - [Events](./events/index.md) \ No newline at end of file From e4f3020c8d1579af261151414100469402e3fba9 Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 13:38:48 +1000 Subject: [PATCH 06/10] :rotating_light: (#410): Fix the links on the run a model home page --- docs/models/run-a-model/index.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/models/run-a-model/index.md b/docs/models/run-a-model/index.md index d81c020c2..1a1345b2e 100644 --- a/docs/models/run-a-model/index.md +++ b/docs/models/run-a-model/index.md @@ -7,7 +7,7 @@ If *Model*, *Model Component* or *Model Configuration* are not familiar terms fo If you have not run a model before, our [Getting Started Guide](./getting_started/access_to_gadi_at_nci.md) will give you the basics to access the Model infrastructure on the high-performance-computing facility Gadi@NCI. Detailed guides for the different Model configurations can then be found on the following pages: -- [Run ACCESS-ESM](./running-access-esm.md) for the ACCESS Earth System Model configurations -- [Run ACCESS-CM](./running-access-cm.md) for the ACCESS Coupled Model configurations -- [Run ACCESS-AM](./running-access-am.md) for the ACCESS Atmosphere Model configurations -- [Run ACCESS-OM](./running-access-om.md) for the ACCESS Ocean Model configurations \ No newline at end of file +- [Run ACCESS-ESM](./run-access-esm.md) for the ACCESS Earth System Model configurations +- [Run ACCESS-CM](./run-access-cm.md) for the ACCESS Coupled Model configurations +- [Run ACCESS-AM](./run-access-am.md) for the ACCESS Atmosphere Model configurations +- [Run ACCESS-OM](./run-access-om.md) for the ACCESS Ocean Model configurations \ No newline at end of file From 4f7b82a1cdb3c97b3570059c0f9a30e81386545d Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 13:40:20 +1000 Subject: [PATCH 07/10] :rotating_light: (#410): Fix the links in the run a model getting started --- docs/models/run-a-model/getting_started/index.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/models/run-a-model/getting_started/index.md b/docs/models/run-a-model/getting_started/index.md index 0ad038147..3dfd72dd1 100644 --- a/docs/models/run-a-model/getting_started/index.md +++ b/docs/models/run-a-model/getting_started/index.md @@ -5,7 +5,7 @@ If *Model*, *Model Component* or *Model Configuration* are not familiar terms fo If you have not run a model before, our [Getting Started Guide](./access_to_gadi_at_nci.md) will give you the basics to access the Model infrastructure on the high-performance-computing facility Gadi@NCI. Detailed guides for the different Model configurations can then be found on the following pages: -- [Run ACCESS-ESM](../running-access-esm.md) for the ACCESS Earth System Model configurations -- [Run ACCESS-CM](../running-access-cm.md) for the ACCESS Coupled Model configurations -- [Run ACCESS-AM](../running-access-am.md) for the ACCESS Atmosphere Model configurations -- [Run ACCESS-OM](../running-access-om.md) for the ACCESS Ocean Model configurations \ No newline at end of file +- [Run ACCESS-ESM](../run-access-esm.md) for the ACCESS Earth System Model configurations +- [Run ACCESS-CM](../run-access-cm.md) for the ACCESS Coupled Model configurations +- [Run ACCESS-AM](../run-access-am.md) for the ACCESS Atmosphere Model configurations +- [Run ACCESS-OM](../run-access-om.md) for the ACCESS Ocean Model configurations \ No newline at end of file From c91bb2159ff6b1d8adf11c702bb2e6de1ddbd871 Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 13:58:01 +1000 Subject: [PATCH 08/10] :lipstick: (#410): Changed the brackets after numbers to dots --- .../model_evaluation_on_gadi_esmvaltool.md | 2 +- .../model_evaluation_on_gadi_ilamb.md | 47 ++++++++++--------- docs/models/run-a-model/run-access-cm.md | 2 +- 3 files changed, 26 insertions(+), 25 deletions(-) diff --git a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_esmvaltool.md b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_esmvaltool.md index ef920b89f..b37b88b32 100644 --- a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_esmvaltool.md +++ b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_esmvaltool.md @@ -1,3 +1,3 @@ # Tutorial for using `esmvaltool` on Gadi@NCI -{% include "call_contribute.md" %} \ No newline at end of file + \ No newline at end of file diff --git a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md index ac192f30e..2159780f4 100644 --- a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md +++ b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md @@ -2,21 +2,22 @@ This tutorial explains how you can setup and run International Land Model Benchmarking (ILAMB) and International Ocean Model Benchmarking (IOMB) tests on `NCI` infrastracture. Both projects are maintained as `python` code under the package name `ilamb`. -The Tutorial contains: -1) [Background](#1-background-international-land-model-benchmarking-ilamb-and-international-ocean-model-benchmarking-iomb) -2) [Installation guide](#2-installing-ilamb) -3) [Setup details](#3-configuring-ilamb) -4) [Run `ilamb`](#4-run-ilamb) -5) [Run `liamb` on `NCI`](#5-run-ilamb-on-nci) -6) [Fix your setup with `ilamb-doctor`](#6-fix-your-interactive-setup-with-ilamb_doctor) +The Tutorial contains: + +1. [Background](#1-background-international-land-model-benchmarking-ilamb-and-international-ocean-model-benchmarking-iomb) +2. [Installation guide](#2-installing-ilamb) +3. [Setup details](#3-configuring-ilamb) +4. [Run `ilamb`](#4-run-ilamb) +5. [Run `liamb` on `NCI`](#5-run-ilamb-on-nci) +6. [Fix your setup with `ilamb-doctor`](#6-fix-your-interactive-setup-with-ilamb_doctor) -## 1) Background: International Land Model Benchmarking (ILAMB) and International Ocean Model Benchmarking (IOMB) +## 1. Background: International Land Model Benchmarking (ILAMB) and International Ocean Model Benchmarking (IOMB) As earth system models (ESMs) become increasingly complex, there is a growing need for comprehensive and multi-faceted evaluation of model projections. The International Land Model Benchmarking (ILAMB) project is a model-data intercomparison and integration project designed to improve the performance of land models and, in parallel, improve the design of new measurement campaigns to reduce uncertainties associated with key land surface processes. If you have used (and installed) `ilamb` on NCI and know the basic principle of `ilamb`, you can start from [Section 5) Guide for using ilamb on NCI](#5-guide-for-use-on-nci). -## 2) Installing `ilamb` +## 2. Installing `ilamb` For NCI users, ACCESS-NRI is providing a `conda` environment called `ilamb_dev` through the `xp65` project, with ilamb installed. You can load and activate it via: @@ -30,7 +31,7 @@ We will soon add `ilamb` also to the ACCESS-NRI MED `conda` environment, `access If you want to install `ilamb` yourself, please follow the official installation instructions at [https://www.ilamb.org/doc/install.html](https://www.ilamb.org/doc/install.html). -## 3) Configuring `ilamb` +## 3. Configuring `ilamb` Before you can run `ilamb`, you need to configure a few things: @@ -39,7 +40,7 @@ Before you can run `ilamb`, you need to configure a few things: 3.3. [Set up a `modelroute` and `regions` files](#33-set-up-modelroute-and-regions-files) (Optional, if you want to run only a subset of models and/or specific regions of the world) 3.4. [Download a `shapefiles` files locally](#33-download-a-shapefiles-files-locally) (Optional online, necessary offline e.g. on NCI compute nodes) -### 3.1) Organise the ILAMB_ROOT path +### 3.1 Organise the ILAMB_ROOT path `ilamb` demands files to be organised in a specific directory structure of `DATA` and `MODELS`. @@ -70,7 +71,7 @@ $ILAMB_ROOT (renamed from "ILAMB_sample") There are two main branches in this directory. The first is the `DATA` directory–this is where we keep the observational datasets each in a subdirectory bearing the name of the variable. While not strictly necesary to follow this form, it is a convenient convention. The second branch is the `MODEL` directory in which we see a single model result from CLM. -#### 3.1.1) Add files to DATA +#### 3.1.1 Add files to DATA There is a lot of DATA available to add. Take a look at https://www.ilamb.org/ILAMB-Data/ and https://www.ilamb.org/IOMB-Data/ for extensive lists for ILAMB-Data (land modelling) and IOMB-Data (ocean modelling). @@ -104,13 +105,13 @@ ilamb-fetch --remote_root https://www.ilamb.org/IOMB-Data/ ``` -#### 3.1.2) Add files to MODEL +#### 3.1.2 Add files to MODEL If you want to add your own `MODEL` to `ilamb`, you can do so by following [this description](https://www.ilamb.org/doc/add_model.html). For `NCI` users, our `ilamb_dev` `conda` enrivonment already provides all observational datasets from the `ilamb` official web and the [ACCESS-ESM1_5](https://access-hive.org.au/configurations/access-esm/) model result for user at `ILAMB_ROOT`. Stay tune for more observational and model data or tell us which ones we should definitely add. -### 3.2) Set up a `config` file +### 3.2 Set up a `config` file Now that we have the data, we need to setup a `config` file which the `ilamb` package will use to initiate a benchmark study. @@ -198,7 +199,7 @@ weight = 1 ``` -### 3.3) Set up `modelroute` and `regions` files +### 3.3 Set up `modelroute` and `regions` files If you plan to run only a specific subset of models, you can already define them in a `modelroute.txt` file. It could look like our specific example for running different versions (1, 2, and 3) of the ACCESS-ESM 1.5 suite: @@ -210,7 +211,7 @@ ACCESS_ESM1-5-r3i1p1f1 , MODELS/r3i1p1f1 , CMIP6 ... (abbreviated) ``` -### 3.4) Download/link `shapefiles` files locally +### 3.4 Download/link `shapefiles` files locally You can download the `shapefiles` that are needed to run `ilamb` and `cartopy` offline here: @@ -227,9 +228,9 @@ Note: For NCI, we already provide shapefiles in a directory as part of project ` export CARTOPY_DATA_DIR=/g/data/xp65/public/apps/cartopy-data ``` -## 4) Run `ilamb` +## 4. Run `ilamb` -### 4.1) ilamb-run +### 4.1 ilamb-run Now that we have the configuration file set up, you can run the study using the `ilamb-run` script. Executing the following command at the $ILAMB_ROOT directory will run `ilamb` as specified in your `sample.cfg` for all models of the `model_root` and all regions (`global`) of the world: ``` @@ -264,7 +265,7 @@ Next we ran all model-confrontation pairs. In our parlance, a confrontation is a The next stage is the post-processing. This is done as a separate loop to exploit some parallelism. All the work in a model-confrontation pair is purely local to the pair. Yet plotting results on the same scale implies that we know the maxmimum and minimum values from all models and thus requires the communcation of this information. Here, as we are plotting only over the globe and not extra regions, the plotting occurs quickly. -### 4.2) Run specific models and regions +### 4.2 Run specific models and regions As mentioned in [Section 3.3](#33-set-up-modelroute-and-regions-files), you can adjust the models and regions that `ilamb` will run on. You can find more information in the `ilamb` [tutorial](https://www.ilamb.org/doc/ilamb_run.html). Calling `ilamb-run` with both specifications, would look like: ``` @@ -272,7 +273,7 @@ ilamb-run --config cmip.cfg --model_setup modelroute.txt --regions regions.txt ``` where you call a specific config file (see [Section 3.2](#32-set-up-a-config-file)) as well as specific model routes and regions with files (see [Section 3.3](#33-set-up-modelroute-and-regions-files)). -### 4.3) Viewing the benchmarking output in your browser +### 4.3 Viewing the benchmarking output in your browser The whole process generates a directory of results within ILAMB_ROOT which by default is called `_build`. To view the results locally on your computer, navigate into this directory and start a local `http` server: ``` @@ -290,7 +291,7 @@ As we add more variables and models, this summary table helps you understand rel

Detailed output of Surface Upward SW Radiation Benchmarking

-## 5) Run `ilamb` on NCI +## 5. Run `ilamb` on NCI If you followed the guides above, you should be familiar with how you can setup `ilamb`. @@ -298,7 +299,7 @@ To run `ilamb` on NCI, you can either start an interactive setup [Section 5.1](# In both cases, you need to again define the variable `$ILAMB_ROOT` -### 5.1) ILAMB_ROOT and DATA/MODEL on NCI +### 5.1 ILAMB_ROOT and DATA/MODEL on NCI In our default setup, we will place ILAMB_ROOT and the shapefiles for cartopy directly in the home directory. First, you have to create the ILAMB_ROOT directory ``` @@ -355,7 +356,7 @@ or shorter source = $ILAMB_ROOT/MODELS/r1i1p1f1/Amon/rsus/gn/files/d20191115/rsus_Amon_ACCESS-ESM1-5_historical_r1i1p1f1_gn_185001-201412.nc ``` -### 5.2) Portable Batch System (PBS) jobs on NCI +### 5.2 Portable Batch System (PBS) jobs on NCI The following default PBS file, let's call it `ilamb_test.sh` can help you to setup your own, while making sure to use the correct project (#PBS -P) to charge your computing cost to: ``` diff --git a/docs/models/run-a-model/run-access-cm.md b/docs/models/run-a-model/run-access-cm.md index 3922ac56f..ad8cfb96d 100644 --- a/docs/models/run-a-model/run-access-cm.md +++ b/docs/models/run-a-model/run-access-cm.md @@ -10,7 +10,7 @@ It is also built as a future point of reference, where you can come back and fin - A Linux/Mac/Unix computer with an internet connection and a command line terminal (e.g., MacOS with XQuartz and command line tools installed, or Putty Cygwin/MobaXterm/similar X-Windows compatible program on a PC). ### Requirements for running ACCESS-CM suites -Here, we assume that you already have access to Gadi, the supercomputer hosted by the National Computational Infrastructure (NCI). If needed, you can go back to our guide on how to get [access to Gadi](../running-a-model/getting_started/access_to_gadi_at_nci.md). +Here, we assume that you already have access to Gadi, the supercomputer hosted by the National Computational Infrastructure (NCI). If needed, you can go back to our guide on how to get [access to Gadi](../run-a-model/getting_started/access_to_gadi_at_nci.md). #### Basic Setup To run an ACCESS-CM suite, new users will need to: From 36731000f78505b33846399fe8f648ac7a11525f Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 14:00:56 +1000 Subject: [PATCH 09/10] :rotating_light: (410): Fixed not found image warnings --- .../model_evaluation_on_gadi_ilamb.md | 4 ++-- .../model_evaluation_on_gadi_pangeo_cosima.md | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md index 2159780f4..41e34eeac 100644 --- a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md +++ b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_ilamb.md @@ -285,11 +285,11 @@ Serving HTTP on 0.0.0.0 port 8000 (http://0.0.0.0:8000/) ... ``` Open this link in your browser and you will see a webpage with a summary table in the center. As we have so few variables and a single model at this point, the table will very simple: -

Starting side of ilamb output

+

Starting side of ilamb output

As we add more variables and models, this summary table helps you understand relative differences in scores among models. For now, clicking on a row of the table will expand it to reveal the underlying datasets used. Clicking on CERES will take you to another page which presents detailed scores and plots. -

Detailed output of Surface Upward SW Radiation Benchmarking

+

Detailed output of Surface Upward SW Radiation Benchmarking

## 5. Run `ilamb` on NCI diff --git a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_pangeo_cosima.md b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_pangeo_cosima.md index 446f2f660..d4f9cf31e 100644 --- a/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_pangeo_cosima.md +++ b/docs/model_evaluation/model_evaluation_on_gadi/model_evaluation_on_gadi_pangeo_cosima.md @@ -1,5 +1,5 @@ # Tutorial for using `pangeo` & COSIMA on Gadi@NCI -{% include "call_contribute.md" %} + https://pangeo.io \ No newline at end of file From 05a69ebc9f79859e423c4fe4f43d63662ed6ce4a Mon Sep 17 00:00:00 2001 From: Jasmeen Kaur Date: Mon, 10 Jul 2023 14:50:17 +1000 Subject: [PATCH 10/10] :recycle: (#410): Could not fix the jules annual science meeting --- ...ES_annual_science_meeting.md => JulesAnnualScienceMeeting.md} | 0 docs/community_resources/events/index.md | 1 - 2 files changed, 1 deletion(-) rename docs/community_resources/events/events/2023/{JULES_annual_science_meeting.md => JulesAnnualScienceMeeting.md} (100%) diff --git a/docs/community_resources/events/events/2023/JULES_annual_science_meeting.md b/docs/community_resources/events/events/2023/JulesAnnualScienceMeeting.md similarity index 100% rename from docs/community_resources/events/events/2023/JULES_annual_science_meeting.md rename to docs/community_resources/events/events/2023/JulesAnnualScienceMeeting.md diff --git a/docs/community_resources/events/index.md b/docs/community_resources/events/index.md index 2def51125..b6b34a44f 100644 --- a/docs/community_resources/events/index.md +++ b/docs/community_resources/events/index.md @@ -1,5 +1,4 @@ # Workshops and Conferences -TODO get the liquid working {{ events_content }}