diff --git a/README.md b/README.md
index f7ad9bf..f9a9baf 100644
--- a/README.md
+++ b/README.md
@@ -10,10 +10,11 @@
 
 The Dilemma is a vertical stagger low-profile keyboard with mods.
 
-![](pics/1g.jpg)
+![](pics/1h.jpg)
 
 ## Table of contents
 
+- [Table of contents](#table-of-contents)
 - [Features](#features)
 - [Versions](#versions)
 - [Wireless abilities](#wireless-abilities)
@@ -21,10 +22,14 @@ The Dilemma is a vertical stagger low-profile keyboard with mods.
   - [DIY version](#diy-version)
   - [Assembled version](#assembled-version)
   - [Trackpad mod](#trackpad-mod)
-  - [3d printed thin case](#3d-printed-thin-case)
-  - [3d printed less-thin case with tenting pucks](#3d-printed-less-thin-case-with-tenting-pucks)
+- [Cases](#cases)
+  - [Acrylic midplate (v2 only)](#acrylic-midplate-v2-only)
+  - [Acrylic bottom plate](#acrylic-bottom-plate)
+  - [Tents - metal bottom plate](#tents---metal-bottom-plate)
+  - [3d printed thin case (v1 only)](#3d-printed-thin-case-v1-only)
+  - [3d printed less-thin case with tenting pucks (v1 only)](#3d-printed-less-thin-case-with-tenting-pucks-v1-only)
 - [Build guide](#build-guide)
-- [Support me on patreon](#support-me-on-patreon) 
+- [Support me on Patreon](#support-me-on-patreon)
 - [Others / in progress](#others--in-progress)
 
 
@@ -34,9 +39,8 @@ The Dilemma is a vertical stagger low-profile keyboard with mods.
 
 - Heavy pinky stagger
 - MX and choc compatible
-- Reversible PCB
-- Elite-pi / Splinky / Nice!Nano compatible
-- Tenting puck footprint
+- Underglow RGB, Per-key RGB
+- 2 Rotary encoders on thumb clusters
 
 ## Versions
 
@@ -98,18 +102,18 @@ Order in 1.2mm thickness.
 
 ### Assembled version
 
-![](pics/1d.png)
+![](pics/1i.jpg)
 
 
 On top of the parts mentioned above, you will need:
 
 | Part name                     | Amount | Link / source       |
 | ----------------------------- | ------ | ------------------- |
-| Dilemma PCB, assembled, 1.2mm | 2      | See Release section |
+| Dilemma PCB, assembled | 2      | See Release section |
 
 The release section contains the latest gerbers with BOM and POS files.
 
-Order in 1.2mm thickness.
+Order in 1.6mm thickness.
 
 ### Trackpad mod
 
@@ -128,6 +132,8 @@ When installing the trackpad mod, you will need:
 | M3 screw, torx, 6mm | 4      | Conrad                  |
 | M3x5x5 screw insert | 4      | Aliexpress              |
 | 3d printed parts    |        | See `mechanical` folder |
+| 40mm cirque trackpad, curved    |        | |
+
 
 If building the PCBA version, you will also need:
 
@@ -143,8 +149,55 @@ If building the DIY version, you will also need:
 | SOD123 Resistor, 5kOhms | 2      |               |
 | Cables                  |        |               |
 
+## Cases
+
+### Acrylic midplate (v2 only)
+
+This case is only compatible with the assembled_v2 version !
+
+Add an underglow effect and a beautiful view into the PCB with those acrylic midplates.
+
+
+![](pics/1j.jpg)
+
+You will need
+
+| Part name           | Amount | Details      |
+| ------------------- | ------ | ----------------------- |
+| [3d printed top plate](mechanical/plates/v2/top.stl) | 2      | 1 left, 1 right                  |
+|[acrylic mid plate](mechanical/plates/v2/mid_acry_full.dxf) | 2      | Order transparent or frost, 3mm         |
+|  [3d printed bottom plate](mechanical/plates/v2/bottom.stl)*   |  2      | 1 left, 1 right  |
+
+*the 3d printed bottom plate can be swapped out for a full acrylic bottom plate, or a metal plate for the magnet mod (see following sections).
+
+### Acrylic bottom plate
+
+If you are using the acrylic midplate, you can install a full bottom plate. Order the [bottom acrylic plates](mechanical/plates/v2/bottom_acry_full.dxf) in 3mm thickness.
 
-### 3d printed thin case
+You will also need to chamfer the M3 holes for the screws to be flush.
+
+
+### Tents - metal bottom plate
+
+This plate enables the use of tripods through magsafe magents.
+
+Order the [metal plates](mechanical/plates/v2/bottom_metal.dxf) in 3mm thickness. The metal needs to be *magnetized* !
+
+You will also need to chamfer the M3 holes for the screws to be flush.
+
+You will need:
+
+| Part name               | Amount | Details |
+| ----------------------- | ------ | ------------- |
+| Metal plates | 2      |         3mm|
+| Tripods                  |   2     |    Neewer Z flex           |
+| Magsafe tripod adapter                  |   2     |  Amazon/Aliexpress             |
+
+
+
+### 3d printed thin case (v1 only)
+
+This case is only compatible with the DIY and assembled_v1 versions !
 
 Designed for the minimum footprint possible, while still protecting the PCB.
 
@@ -159,7 +212,9 @@ The case is reversible.
 
 It needs to be printed at 0.2mm layer height supportless specifically for the nut inserts suport-less interfaces. If you are doing a different layer height, use supports. 
 
-### 3d printed less-thin case with tenting pucks
+### 3d printed less-thin case with tenting pucks (v1 only)
+
+This case is only compatible with the DIY and assembled_v1 versions !
 
 Accomodates the Splitkb tenting puck, to be used with a Manfrotto tripod.
 
diff --git a/mechanical/plates/v2/bottom_metal.dxf b/mechanical/plates/v2/bottom_metal.dxf
index 4f6a1f4..3fa70a1 100644
--- a/mechanical/plates/v2/bottom_metal.dxf
+++ b/mechanical/plates/v2/bottom_metal.dxf
@@ -7343,15 +7343,15 @@ AcDbEntity
 100
 AcDbCircle
 10
-2.0000000298023179
+-19.749263071049604
 20
--3.0000000447034836
+-23.663241672529477
 30
 0
 40
-22
+1.9999999999999973
 210
-0
+-0
 220
 0
 230
@@ -7359,9 +7359,9 @@ AcDbCircle
 100
 AcDbArc
 50
--113.92860729015086
+-89.999999999999901
 51
-239.71714242168687
+43.53319550618302
 0
 ARC
 5
@@ -7373,13 +7373,13 @@ AcDbEntity
 100
 AcDbCircle
 10
--19.749263071049604
+-12.393883684302356
 20
--23.663241672529477
+26.695388681912512
 30
 0
 40
-1.9999999999999973
+5.0000000000000098
 210
 -0
 220
@@ -7389,11 +7389,11 @@ AcDbCircle
 100
 AcDbArc
 50
--89.999999999999901
+-64.139705696521645
 51
-43.53319550618302
+22.496820193546494
 0
-ARC
+CIRCLE
 5
 276
 100
@@ -7403,25 +7403,19 @@ AcDbEntity
 100
 AcDbCircle
 10
--12.393883684302356
+2.0000000298023224
 20
-26.695388681912512
+-3.0000000447034836
 30
 0
 40
-5.0000000000000098
+20.75
 210
--0
+0
 220
 0
 230
 1
-100
-AcDbArc
-50
--64.139705696521645
-51
-22.496820193546494
 0
 CIRCLE
 5
@@ -7433,17 +7427,17 @@ AcDbEntity
 100
 AcDbCircle
 10
-2.0000000298023224
+2.0000000298023179
 20
 -3.0000000447034836
 30
 0
 40
-22
+20.75
 210
 0
 220
-0
+-0
 230
 1
 0
diff --git a/pics/1h.jpg b/pics/1h.jpg
new file mode 100644
index 0000000..3087053
Binary files /dev/null and b/pics/1h.jpg differ
diff --git a/pics/1i.jpg b/pics/1i.jpg
new file mode 100644
index 0000000..2f03e1d
Binary files /dev/null and b/pics/1i.jpg differ
diff --git a/pics/1j.jpg b/pics/1j.jpg
new file mode 100644
index 0000000..e5acf29
Binary files /dev/null and b/pics/1j.jpg differ