This repo provides basic tuning scripts with support for specific models. The repo relies on Hugging Face SFTTrainer and PyTorch FSDP. Our approach to tuning is:
- Models are loaded from Hugging Face
transformersor the foundation-model-stack -- models are either optimized to useFlash Attention v2directly or throughSDPA - Hugging Face
SFTTrainerfor the training loop FSDPas the backend for training
pip install -e .
Note: After installing, if you wish to use FlashAttention, then you need to install these requirements:
pip install -e ".[dev]"
pip install -e ".[flash-attn]"
FlashAttention requires the CUDA Toolit to be pre-installed.
If you wish to use aim, then you need to install it:
pip install -e ".[aim]"
We support two data formats:
Pre-process the JSON/JSONL dataset to contain a single sequence of each data instance containing input + Response. The trainer is configured to expect a response template as a string. For example, if one wants to prepare the alpaca format data to feed into this trainer, it is quite easy and can be done with the following code.
PROMPT_DICT = {
"prompt_input": (
"Below is an instruction that describes a task, paired with an input that provides further context. "
"Write a response that appropriately completes the request.\n\n"
"### Instruction:\n{instruction}\n\n### Input:\n{input}\n\n### Response:"
),
"prompt_no_input": (
"Below is an instruction that describes a task. "
"Write a response that appropriately completes the request.\n\n"
"### Instruction:\n{instruction}\n\n### Response:"
),
}
def format_alpaca_fn(example):
prompt_input, prompt_no_input = PROMPT_DICT['prompt_input'], PROMPT_DICT['prompt_no_input']
output = prompt_input.format_map(example) if example.get("input", "") != "" else prompt_no_input.format_map(example)
output = f"{output} {example['output']}"
return {"output": output}
ds = datasets.load_dataset('json', data_files='./stanford_alpaca/alpaca_data.json')
alpaca_ds = ds['train'].map(format_alpaca_fn, remove_columns=['instruction', 'input'])
alpaca_ds.to_json("sft_alpaca_data.json")The response template corresponding to the above dataset and the Llama tokenizer is: \n### Response:".
The same way can be applied to any dataset, with more info can be found here.
Once the JSON is converted using the formatting function, pass the dataset_text_field containing the single sequence to the trainer.
Pass a JSON/JSONL and a data_formatter_template to use the formatting function on the fly while tuning. The template should specify fields of JSON with {{field}}. While tuning, the data will be converted to a single sequence using the template.
JSON fields can contain alpha-numeric characters, spaces and the following special symbols - "." , "_", "-".
Example: Train.json
[{ "input" : <text>, "output" : <text>, }, ... ]
data_formatter_template: ### Input: {{input}} \n\n##Label: {{output}}
Formatting will happen on the fly while tuning. The keys in template should match fields in JSON file. The response template corresponding to the above template will need to be supplied. in this case, response template = \n## Label:.
In conclusion, either the data_formatter_template argument or dataset_text_field needs to be supplied to the trainer.
Current supported and tested models are Llama2 (7 and 13B configurations have been tested) and GPTBigCode.
- Using pre-processed dataset for training.
# if you want to use one GPU on multi-gpu machine
export CUDA_VISIBLE_DEVICES=0
# MODEL_PATH=meta-llama/Llama-2-7b-hf # Huggingface model id or path to a checkpoint
# TRAIN_DATA_PATH=twitter_complaints.json # Path to the dataset
# contains data in single sequence {"output": "### Input: text \n\n### Response: text"}
# OUTPUT_PATH=out # Path to the output folder where the checkpoints are saved
python tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--eval_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Response:" \
--dataset_text_field "output"
- Using formatter with JSON/JSONL files
# if you want to use one GPU on multi-gpu machine
export CUDA_VISIBLE_DEVICES=0
# MODEL_PATH=meta-llama/Llama-2-7b-hf # Huggingface model id or path to a checkpoint
# TRAIN_DATA_PATH=twitter_complaints.json # Path to the dataset
# contains data in form of [{"input": text , "output": text}]
# OUTPUT_PATH=out # Path to the output folder where the checkpoints are saved
python tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--eval_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n## Label:" \
--data_formatter_template: "### Input: {{input}} \n\n##Label: {{output}}"
The recommendation is to use huggingface accelerate to launch multi-gpu jobs, in particular when using FSDP:
accelerateis written on top oftorch.distributed.run.accelerate launchCLI highly similar totorchrun, spawns multiple jobs (one for each gpu).- tightly integrated with huggingface Trainer.
accelerate launch CLI to be run with specific command line arguments, see example below. Default arguments handled by passing in a
--config_file argument; see reference docs and fixtures/accelerate_fsdp_defaults.yaml for sample defaults.
# Please set the environment variables:
# MASTER_PORT=1234 # The port at which the process with rank 0 listens to and should be set to an unused port
# MODEL_PATH=meta-llama/Llama-2-7b-hf # Huggingface model id or path to a checkpoint
# TRAIN_DATA_PATH=twitter_complaints.json # Path to the training dataset
# OUTPUT_PATH=out # Path to the output folder where the checkpoints are saved
accelerate launch \
--main_process_port $MASTER_PORT \
--config_file fixtures/accelerate_fsdp_defaults.yaml \
--num_processes=8 \
--main_process_port=$MASTER_PORT \
tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--torch_dtype bfloat16 \
--output_dir $OUTPUT_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--eval_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Response:" \
--dataset_text_field "output"To summarize you can pick either python for singleGPU jobs or use accelerate launch for multiGPU jobs. The following tuning techniques can be applied:
Set peft_method = "lora". You can additionally pass any arguments from LoraConfig.
# Args you can pass
r: int =8
lora_alpha: int = 32
target_modules: List[str] = field(
default_factory=lambda: ["q_proj", "v_proj"],
metadata={
"help": "The names of the modules to apply LORA to. LORA selects modules which either \
completely match or "
'end with one of the strings. If the value is ["all-linear"], \
then LORA selects all linear and Conv1D '
"modules except for the output layer."
},
)
bias = "none"
lora_dropout: float = 0.05
Example command to run:
python tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--num_train_epochs 40 \
--per_device_train_batch_size 4 \
--per_device_eval_batch_size 4 \
--gradient_accumulation_steps 4 \
--save_strategy "epoch" \
--learning_rate 1e-4 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Label:" \
--dataset_text_field "output" \
--use_flash_attn False \
--tokenizer_name_or_path $MODEL_PATH \
--torch_dtype float32 \
--peft_method "lora" \
--logging_strategy "epoch" \
--r 8 \
--lora_dropout 0.05 \
--lora_alpha 16Notice the target_modules that are set are the default values. target_modules are the names of the modules to apply the adapter to. If this is specified, only the modules with the specified names will be replaced. When passing a list of strings, either an exact match will be performed or it is checked if the name of the module ends with any of the passed strings. If this is specified as all-linear, then all linear/Conv1D modules are chosen, excluding the output layer. If this is not specified, modules will be chosen according to the model architecture. If the architecture is not known, an error will be raised — in this case, you should specify the target modules manually. See HuggingFace docs for more details.
For each model, the target_modules will depend on the type of model architecture. You can specify linear or attention layers to target_modules. To obtain list of target_modules for a model:
from transformers import AutoModelForCausalLM
# load the model
model = AutoModelForCausalLM.from_pretrained(MODEL_PATH)
# see the module list
model.modules
# to get just linear layers
import re
model_modules = str(model.modules)
pattern = r'\((\w+)\): Linear'
linear_layer_names = re.findall(pattern, model_modules)
names = []
for name in linear_layer_names:
names.append(name)
target_modules = list(set(names))For example for LLaMA model the modules look like:
<bound method Module.modules of LlamaForCausalLM(
(model): LlamaModel(
(embed_tokens): Embedding(32000, 4096, padding_idx=0)
(layers): ModuleList(
(0-31): 32 x LlamaDecoderLayer(
(self_attn): LlamaSdpaAttention(
(q_proj): Linear(in_features=4096, out_features=4096, bias=False)
(k_proj): Linear(in_features=4096, out_features=4096, bias=False)
(v_proj): Linear(in_features=4096, out_features=4096, bias=False)
(o_proj): Linear(in_features=4096, out_features=4096, bias=False)
(rotary_emb): LlamaRotaryEmbedding()
)
(mlp): LlamaMLP(
(gate_proj): Linear(in_features=4096, out_features=11008, bias=False)
(up_proj): Linear(in_features=4096, out_features=11008, bias=False)
(down_proj): Linear(in_features=11008, out_features=4096, bias=False)
(act_fn): SiLU()
)
(input_layernorm): LlamaRMSNorm()
(post_attention_layernorm): LlamaRMSNorm()
)
)
(norm): LlamaRMSNorm()
)
(lm_head): Linear(in_features=4096, out_features=32000, bias=False)
)>
You can specify attention or linear layers. With the CLI, you can specify layers with --target_modules "q_proj" "v_proj" "k_proj" "o_proj" or --target_modules "all-linear".
Specify peft_method to 'pt' . You can additionally pass any arguments from PromptTuningConfig.
# prompt_tuning_init can be either "TEXT" or "RANDOM"
prompt_tuning_init: str = "TEXT"
num_virtual_tokens: int = 8
# prompt_tuning_init_text only applicable if prompt_tuning_init= "TEXT"
prompt_tuning_init_text: str = "Classify if the tweet is a complaint or not:"
tokenizer_name_or_path: str = "llama-7b-hf"Example command you can run:
accelerate launch \
--main_process_port $MASTER_PORT \
--config_file fixtures/accelerate_fsdp_defaults.yaml \
tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--peft_method pt \
--torch_dtype bfloat16 \
--tokenizer_name_or_path $MODEL_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 1 \
--per_device_eval_batch_size 1 \
--gradient_accumulation_steps 1 \
--eval_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Label:" \
--dataset_text_field "output" Set peft_method = 'None'
Full fine tuning needs more compute resources, so it is advised to use the MultiGPU method
accelerate launch \
--main_process_port $MASTER_PORT \
--config_file fixtures/accelerate_fsdp_defaults.yaml \
tuning/sft_trainer.py \
--model_name_or_path $MODEL_PATH \
--training_data_path $TRAIN_DATA_PATH \
--output_dir $OUTPUT_PATH \
--peft_method "None" \
--torch_dtype bfloat16 \
--tokenizer_name_or_path $MODEL_PATH \
--num_train_epochs 5 \
--per_device_train_batch_size 1 \
--per_device_eval_batch_size 1 \
--gradient_accumulation_steps 1 \
--eval_strategy "no" \
--save_strategy "epoch" \
--learning_rate 1e-5 \
--weight_decay 0. \
--warmup_ratio 0.03 \
--lr_scheduler_type "cosine" \
--logging_steps 1 \
--include_tokens_per_second \
--packing False \
--response_template "\n### Label:" \
--dataset_text_field "output" Currently, we do not offer inference support as part of the library, but we provide a standalone script for running inference on tuned models for testing purposes. For a full list of options run python scripts/run_inference.py --help. Note that no data formatting / templating is applied at inference time.
If you want to run a single example through a model, you can pass it with the --text flag.
python scripts/run_inference.py \
--model my_checkpoint \
--text "This is a text the model will run inference on" \
--max_new_tokens 50 \
--out_file result.jsonTo run multiple examples, pass a path to a file containing each source text as its own line. Example:
Contents of source_texts.txt
This is the first text to be processed.
And this is the second text to be processed.
python scripts/run_inference.py \
--model my_checkpoint \
--text_file source_texts.txt \
--max_new_tokens 50 \
--out_file result.jsonAfter running the inference script, the specified --out_file will be a JSON file, where each text has the original input string and the predicted output string, as follows. Note that due to the implementation of .generate() in Transformers, in general, the input string will be contained in the output string as well.
[
{
"input": "{{Your input string goes here}}",
"output": "{{Generate result of processing your input string goes here}}"
},
...
]
If you tuned a model using a local base model, then a machine-specific path will be saved into your checkpoint by Peft, specifically the adapter_config.json. This can be problematic if you are running inference on a different machine than you used for tuning.
As a workaround, the CLI for inference provides an arg for --base_model_name_or_path, where a new base model may be passed to run inference with. This will patch the base_model_name_or_path in your checkpoint's adapter_config.json while loading the model, and restore it to its original value after completion. Alternatively, if you like, you can change the config's value yourself.
NOTE: This can also be an issue for tokenizers (with the tokenizer_name_or_path config entry). We currently do not allow tokenizer patching since the tokenizer can also be explicitly configured within the base model and checkpoint model, but may choose to expose an override for the tokenizer_name_or_path in the future.
We can use lm-evaluation-harness from EleutherAI for evaluating the generated model. For example, for the Llama-13B model, using the above command and the model at the end of Epoch 5, we evaluated MMLU score to be 53.9 compared to base model to be 52.8.
How to run the validation:
pip install -U transformers
pip install -U datasets
git clone https://github.com/EleutherAI/lm-evaluation-harness
cd lm-evaluation-harness
pip install -e .
python main.py \
--model hf-causal \
--model_args pretrained=$MODEL_PATH \
--output_path $OUTPUT_PATH/results.json \
--tasks boolq,piqa,hellaswag,winogrande,arc_easy,arc_challenge,hendrycksTest-*The above runs several tasks with hendrycksTest-* being MMLU.