Problems with font rendering and history on Tabby

[filipebcs]

Hi, guys.

I have installed Oh My Zsh on my Mac and I have been using the Tabby Terminal Version 1.0.207 (1.0.207), but this problem happens in other terminal apps as well.

I have configure powerlevel10k as instructed here on its GitHub page and I have some icons which are not being rendered correctly, such as the apple logo pointed out below.

Also, I tried to echo the apple logo using its unicode, but it shows me a weird symbol instead.

I don't know why this is happening since I have MESLOLGS NF font installed in my system as shown below and Tabby is configured to use them

Also, if I close the terminal, I am getting this prompt line in my history command which does not make sense, because I did not type any command there.

Previous

After

I am attaching my .zshrc file here as well.

# CodeWhisperer pre block. Keep at the top of this file.
[[ -f "${HOME}/Library/Application Support/codewhisperer/shell/zshrc.pre.zsh" ]] && builtin source "${HOME}/Library/Application Support/codewhisperer/shell/zshrc.pre.zsh"
# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH

# Path to your oh-my-zsh installation.
export ZSH="$HOME/.oh-my-zsh"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
# ZSH_THEME="robbyrussell"
ZSH_THEME="powerlevel10k/powerlevel10k"

# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment one of the following lines to change the auto-update behavior
# zstyle ':omz:update' mode disabled  # disable automatic updates
# zstyle ':omz:update' mode auto      # update automatically without asking
# zstyle ':omz:update' mode reminder  # just remind me to update when it's time

# Uncomment the following line to change how often to auto-update (in days).
# zstyle ':omz:update' frequency 13

# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# You can also set it to another string to have that shown instead of the default red dots.
# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

source $ZSH/oh-my-zsh.sh

# User configuration

# export MANPATH="/usr/local/man:$MANPATH"

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-arch x86_64"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
source ~/powerlevel10k/powerlevel10k.zsh-theme

# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
source /opt/homebrew/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh

###### Custom plugins
# source $HOMEBREW_PREFIX/share/zsh-autosuggestions/zsh-autosuggestions.zsh
# source $HOMEBREW_PREFIX/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh
# . $HOMEBREW_PREFIX/etc/profile.d/z.sh
source /opt/homebrew/share/zsh-autosuggestions/zsh-autosuggestions.zsh
. /opt/homebrew/etc/profile.d/z.sh

# >>> conda initialize >>>
# !! Contents within this block are managed by 'conda init' !!
__conda_setup="$('/Users/filipedasilveira/anaconda3/bin/conda' 'shell.zsh' 'hook' 2> /dev/null)"
if [ $? -eq 0 ]; then
    eval "$__conda_setup"
else
    if [ -f "/Users/filipedasilveira/anaconda3/etc/profile.d/conda.sh" ]; then
        . "/Users/filipedasilveira/anaconda3/etc/profile.d/conda.sh"
    else
        export PATH="/Users/filipedasilveira/anaconda3/bin:$PATH"
    fi
fi
unset __conda_setup
# <<< conda initialize <<<

# CodeWhisperer post block. Keep at the bottom of this file.
[[ -f "${HOME}/Library/Application Support/codewhisperer/shell/zshrc.post.zsh" ]] && builtin source "${HOME}/Library/Application Support/codewhisperer/shell/zshrc.post.zsh"

Can anyone help me with these issues?

[filipebcs]

Ok. I managed to solve it. You have to choose unicode characters instead of entering ASCII when setting up powerlevel10k

[TGSMLM]

这是来自QQ邮箱的假期自动回复邮件。你好，我最近正在休假中，无法亲自回复你的邮件。我将在假期结束后，尽快给你回复。