int33.lst

--------M-330000-----------------------------
INT 33 - MS MOUSE - RESET DRIVER AND READ STATUS
	AX = 0000h
Return: AX = status
	    0000h hardware/driver not installed
	    FFFFh hardware/driver installed
	BX = number of buttons
	    0000h other than two
	    0002h two buttons (many drivers)
	    0003h Mouse Systems/Logitech three-button mouse
	    FFFFh two buttons
Notes:	since INT 33 might be uninitialized on old machines, the caller
	  should first check that INT 33 is neither 0000h:0000h nor points at
	  an IRET instruction (BYTE CFh) before calling this API
	to use mouse on a Hercules-compatible monographics card in graphics
	  mode, you must first set 0040h:0049h to 6 for page 0 or 5 for page 1,
	  and then call this function.	Logitech drivers v5.01 and v6.00
	  reportedly do not correctly use Hercules graphics in dual-monitor
	  systems, while version 4.10 does.
	the Logitech mouse driver contains the signature string "LOGITECH"
	  three bytes past the interrupt handler; many of the Logitech mouse
	  utilities check for this signature.
	Logitech MouseWare v6.30 reportedly does not support CGA video modes
	  if no CGA is present when it is started and the video board is
	  later switched into CGA emulation
SeeAlso: AX=0011h,AX=0021h,AX=002Fh,INT 62/AX=007Ah,INT 74
--------M-330001-----------------------------
INT 33 - MS MOUSE v1.0+ - SHOW MOUSE CURSOR
	AX = 0001h
SeeAlso: AX=0002h,INT 16/AX=FFFEh,INT 62/AX=007Bh,INT 6F/AH=06h"F_TRACK_ON"
--------M-330002-----------------------------
INT 33 - MS MOUSE v1.0+ - HIDE MOUSE CURSOR
	AX = 0002h
Note:	multiple calls to hide the cursor will require multiple calls to
	  function 01h to unhide it.
SeeAlso: AX=0001h,AX=0010h,INT 16/AX=FFFFh,INT 62/AX=007Bh
SeeAlso: INT 6F/AH=08h"F_TRACK_OFF"
--------M-330003-----------------------------
INT 33 - MS MOUSE v1.0+ - RETURN POSITION AND BUTTON STATUS
	AX = 0003h
Return: BX = button status (see #03168)
	CX = column
	DX = row
Note:	in text modes, all coordinates are specified as multiples of the cell
	  size, typically 8x8 pixels
SeeAlso: AX=0004h,AX=000Bh,INT 2F/AX=D000h"ZWmous"

Bitfields for mouse button status:
Bit(s)	Description	(Table 03168)
 0	left button pressed if 1
 1	right button pressed if 1
 2	middle button pressed if 1 (Mouse Systems/Logitech/Genius)
--------M-330004-----------------------------
INT 33 - MS MOUSE v1.0+ - POSITION MOUSE CURSOR
	AX = 0004h
	CX = column
	DX = row
Note:	the row and column are truncated to the next lower multiple of the cell
	  size (typically 8x8 in text modes); however, some versions of the
	  Microsoft documentation incorrectly state that the coordinates are
	  rounded
SeeAlso: AX=0003h,INT 62/AX=0081h,INT 6F/AH=10h"F_PUT_SPRITE"
--------M-330005-----------------------------
INT 33 - MS MOUSE v1.0+ - RETURN BUTTON PRESS DATA
	AX = 0005h
	BX = button number (see #03169)
Return: AX = button states (see #03168)
	BX = number of times specified button has been pressed since last call
	CX = column at time specified button was last pressed
	DX = row at time specified button was last pressed
Note:	at least for the Genius mouse driver, the number of button presses
	  returned is limited to 7FFFh
SeeAlso: AX=0006h,INT 62/AX=007Ch

(Table 03169)
Values for mouse button number:
 0000h	left
 0001h	right
 0002h	middle (Mouse Systems/Logitech/Genius mouse)
--------M-330006-----------------------------
INT 33 - MS MOUSE v1.0+ - RETURN BUTTON RELEASE DATA
	AX = 0006h
	BX = button number (see #03169)
Return: AX = button states (see #03168)
	BX = number of times specified button has been released since last call
	CX = column at time specified button was last released
	DX = row at time specified button was last released
Note:	at least for the Genius mouse driver, the number of button releases
	  returned is limited to 7FFFh
SeeAlso: AX=0005h,INT 62/AX=007Ch
--------M-330007-----------------------------
INT 33 - MS MOUSE v1.0+ - DEFINE HORIZONTAL CURSOR RANGE
	AX = 0007h
	CX = minimum column
	DX = maximum column
Note:	in text modes, the minimum and maximum columns are truncated to the
	  next lower multiple of the cell size, typically 8x8 pixels
SeeAlso: AX=0008h,AX=0010h,AX=0031h,INT 62/AX=0080h
SeeAlso: INT 6F/AH=0Ch"F_SET_LIMITS_X"
--------M-330008-----------------------------
INT 33 - MS MOUSE v1.0+ - DEFINE VERTICAL CURSOR RANGE
	AX = 0008h
	CX = minimum row
	DX = maximum row
Note:	in text modes, the minimum and maximum rows are truncated to the
	  next lower multiple of the cell size, typically 8x8 pixels
SeeAlso: AX=0007h,AX=0010h,AX=0031h,INT 62/AX=0080h
SeeAlso: INT 6F/AH=0Eh"F_SET_LIMITS_Y"
--------M-330009-----------------------------
INT 33 - MS MOUSE v3.0+ - DEFINE GRAPHICS CURSOR
	AX = 0009h
	BX = column of cursor hot spot in bitmap (-16 to 16)
	CX = row of cursor hot spot (-16 to 16)
	ES:DX -> mask bitmap (see #03170)
Notes:	in graphics modes, the screen contents around the current mouse cursor
	  position are ANDed with the screen mask and then XORed with the
	  cursor mask
	the Microsoft mouse driver v7.04 and v8.20 uses only BL and CL, so the
	  hot spot row/column should be limited to -128..127
	Microsoft KnowledgeBase article Q19850 states that the high bit is
	  right-most, but that statement is contradicted by all other available
	  documentation
SeeAlso: AX=000Ah,AX=0012h,AX=002Ah,INT 62/AX=007Fh,INT 6F/AH=0Ah"F_DEF_MASKS"

Format of mouse mask bitmap:
Offset	Size	Description	(Table 03170)
 00h 16 WORDs	screen mask
 10h 16 WORDs	cursor mask
Note:	each word defines the sixteen pixels of a row, low bit rightmost
--------M-33000A-----------------------------
INT 33 - MS MOUSE v3.0+ - DEFINE TEXT CURSOR
	AX = 000Ah
	BX = hardware/software text cursor
	    0000h software
		CX = screen mask
		DX = cursor mask
	    0001h hardware
		CX = start scan line
		DX = end scan line
Note:	when the software cursor is selected, the character/attribute data at
	  the current screen position is ANDed with the screen mask and then
	  XORed with the cursor mask
SeeAlso: AX=0009h,INT 62/AX=007Eh
--------M-33000B-----------------------------
INT 33 - MS MOUSE v1.0+ - READ MOTION COUNTERS
	AX = 000Bh
Return: CX = number of mickeys mouse moved horizontally since last call
	DX = number of mickeys mouse moved vertically
Notes:	a mickey is the smallest increment the mouse can sense
	positive values indicate down/right
SeeAlso: AX=0003h,AX=001Bh,AX=0027h
--------M-33000C-----------------------------
INT 33 - MS MOUSE v1.0+ - DEFINE INTERRUPT SUBROUTINE PARAMETERS
	AX = 000Ch
	CX = call mask (see #03171)
	ES:DX -> FAR routine (see #03172)
SeeAlso: AX=0018h

Bitfields for mouse call mask:
Bit(s)	Description	(Table 03171)
 0	call if mouse moves
 1	call if left button pressed
 2	call if left button released
 3	call if right button pressed
 4	call if right button released
 5	call if middle button pressed (Mouse Systems/Logitech/Genius mouse)
 6	call if middle button released (Mouse Systems/Logitech/Genius mouse)
 7-15	unused
Note:	some versions of the Microsoft documentation incorrectly state that CX
	  bit 0 means call if mouse cursor moves

(Table 03172)
Values interrupt routine is called with:
	AX = condition mask (same bit assignments as call mask)
	BX = button state
	CX = cursor column
	DX = cursor row
	SI = horizontal mickey count
	DI = vertical mickey count
Notes:	some versions of the Microsoft documentation erroneously swap the
	  meanings of SI and DI
	in text modes, the row and column will be reported as a multiple of
	  the character cell size, typically 8x8 pixels
--------M-33000D-----------------------------
INT 33 - MS MOUSE v1.0+ - LIGHT PEN EMULATION ON
	AX = 000Dh
SeeAlso: AX=000Eh,INT 10/AH=04h
--------M-33000E-----------------------------
INT 33 - MS MOUSE v1.0+ - LIGHT PEN EMULATION OFF
	AX = 000Eh
SeeAlso: AX=000Dh
--------M-33000F-----------------------------
INT 33 - MS MOUSE v1.0+ - DEFINE MICKEY/PIXEL RATIO
	AX = 000Fh
	CX = number of mickeys per 8 pixels horizontally (default 8)
	DX = number of mickeys per 8 pixels vertically (default 16)
SeeAlso: AX=0013h,AX=001Ah,INT 62/AX=0082h
--------M-330010-----------------------------
INT 33 - MS MOUSE v1.0+ - DEFINE SCREEN REGION FOR UPDATING
	AX = 0010h
	CX,DX = X,Y coordinates of upper left corner
	SI,DI = X,Y coordinates of lower right corner
Note:	mouse cursor is hidden in the specified region, and needs to be
	  explicitly turned on again
SeeAlso: AX=0001h,AX=0002h,AX=0007h,AX=0010h"Genius MOUSE",AX=0031h
--------M-330012-----------------------------
INT 33 - MS MOUSE - SET LARGE GRAPHICS CURSOR BLOCK
	AX = 0012h
	BH = cursor width in words
	CH = rows in cursor
	BL = horizontal hot spot (-16 to 16)
	CL = vertical hot spot (-16 to 16)
	ES:DX -> bit map of screen and cursor maps
Return: AX = FFFFh if successful
SeeAlso: AX=0009h,AX=002Ah,AX=0035h
--------M-330013-----------------------------
INT 33 - MS MOUSE v5.0+ - DEFINE DOUBLE-SPEED THRESHOLD
	AX = 0013h
	DX = threshold speed in mickeys/second, 0000h = default of 64/second
Note:	if speed exceeds threshold, the cursor's on-screen motion is doubled
SeeAlso: AX=000Fh,AX=001Bh,AX=002Ch
--------M-330014-----------------------------
INT 33 - MS MOUSE v3.0+ - EXCHANGE INTERRUPT SUBROUTINES
	AX = 0014h
	CX = call mask (see #03171)
	ES:DX -> FAR routine
Return: CX = call mask of previous interrupt routine
	ES:DX = FAR address of previous interrupt routine
SeeAlso: AX=000Ch,AX=0018h
--------M-330015-----------------------------
INT 33 - MS MOUSE v6.0+ - RETURN DRIVER STORAGE REQUIREMENTS
	AX = 0015h
Return: BX = size of buffer needed to store driver state
SeeAlso: AX=0016h,AX=0017h,AX=0042h
--------M-330016-----------------------------
INT 33 - MS MOUSE v6.0+ - SAVE DRIVER STATE
	AX = 0016h
	BX = size of buffer (see AX=0015h)
	ES:DX -> buffer for driver state
Note:	although not documented (since the Microsoft driver does not use it),
	  many drivers appear to require BX on input
SeeAlso: AX=0015h,AX=0017h
--------M-330017-----------------------------
INT 33 - MS MOUSE v6.0+ - RESTORE DRIVER STATE
	AX = 0017h
	BX = size of buffer (see AX=0015h)
	ES:DX -> buffer containing saved state
Notes:	although not documented (since the Microsoft driver does not use it),
	  many drivers appear to require BX on input
	some mouse drivers range-check the values in the saved state based on
	  the current video mode; thus, the video mode should be restored
	  before the mouse driver's state is restored
SeeAlso: AX=0015h,AX=0016h
--------M-330018-----------------------------
INT 33 - MS MOUSE v6.0+ - SET ALTERNATE MOUSE USER HANDLER
	AX = 0018h
	CX = call mask (see #03174)
	ES:DX -> FAR routine to be invoked on mouse events (see #03175)
Return: AX = status
	    0018h if successful
	    FFFFh on error
Notes:	up to three handlers can be defined by separate calls to this function,
	  each with a different combination of shift states in the call mask;
	  calling this function again with a call mask of 0000h undefines the
	  specified handler (official documentation); specifying the same
	  call mask and an address of 0000h:0000h undefines the handler (real
	  life)
	some versions of the documentation erroneously reverse the order of
	  the bits in the call mask
SeeAlso: AX=000Ch,AX=0014h,AX=0019h

Bitfields for mouse call mask:
Bit(s)	Description	(Table 03174)
 0	call if mouse moves
 1	call if left button pressed
 2	call if left button released
 3	call if right button pressed
 4	call if right button released
 5	call if shift button pressed during event
 6	call if ctrl key pressed during event
 7	call if alt key pressed during event
Note:	at least one of 5-7 must be set

(Table 03175)
Values user handler is called with:
	AX = condition mask (same bit assignments as call mask)
	BX = button state
	CX = cursor column
	DX = cursor row
	SI = horizontal mickey count
	DI = vertical mickey count
Return: registers preserved
Note:	in text modes, the row and column will be reported as a multiple of
	  the cell size, typically 8x8 pixels
--------M-330019-----------------------------
INT 33 - MS MOUSE v6.0+ - RETURN USER ALTERNATE INTERRUPT VECTOR
	AX = 0019h
	CX = call mask (see #03174)
Return: BX:DX = user interrupt vector
	CX = call mask (0000h if not found)
Note:	attempts to find a user event handler (defined by function 18h)
	  whose call mask matches CX
SeeAlso: AX=0018h
--------M-33001A-----------------------------
INT 33 - MS MOUSE v6.0+ - SET MOUSE SENSITIVITY
	AX = 001Ah
	BX = horizontal speed \
	CX = vertical speed   / (see AX=000Fh)
	DX = double speed threshold (see AX=0013h)
SeeAlso: AX=0013h,AX=001Bh,INT 62/AX=0082h
--------M-33001B-----------------------------
INT 33 - MS MOUSE v6.0+ - RETURN MOUSE SENSITIVITY
	AX = 001Bh
Return: BX = horizontal speed
	CX = vertical speed
	DX = double speed threshold
SeeAlso: AX=000Bh,AX=001Ah
--------M-33001C-----------------------------
INT 33 - MS MOUSE v6.0+ - SET INTERRUPT RATE
	AX = 001Ch
	BX = rate (see #03176)
Notes:	only available on InPort mouse
	values greater than 4 may cause unpredictable driver behavior

(Table 03176)
Values for mouse interrupt rate:
 00h	no interrupts allowed
 01h	30 per second
 02h	50 per second
 03h	100 per second
 04h	200 per second
--------M-33001D-----------------------------
INT 33 - MS MOUSE v6.0+ - DEFINE DISPLAY PAGE NUMBER
	AX = 001Dh
	BX = display page number
Note:	the cursor will be displayed on the specified page
SeeAlso: AX=001Eh
--------M-33001E-----------------------------
INT 33 - MS MOUSE v6.0+ - RETURN DISPLAY PAGE NUMBER
	AX = 001Eh
Return: BX = display page number
SeeAlso: AX=001Dh
--------M-33001F-----------------------------
INT 33 - MS MOUSE v6.0+ - DISABLE MOUSE DRIVER
	AX = 001Fh
Return: AX = status
	    001Fh successful
		ES:BX = INT 33 vector before mouse driver was first installed
	    FFFFh unsuccessful
Notes:	restores vectors for INT 10 and INT 71 (8086) or INT 74 (286/386)
	if you restore INT 33 to ES:BX, driver will be completely disabled
	many drivers return AX=001Fh even though the driver has been disabled
SeeAlso: AX=0020h
--------M-330020-----------------------------
INT 33 - MS MOUSE v6.0+ - ENABLE MOUSE DRIVER
	AX = 0020h
Return: AX = status
	    0020h successful
	    FFFFh unsuccessful
Notes:	restores vectors for INT 10h and INT 71h (8086) or INT 74h (286/386)
	  which were removed by function 1Fh
	Microsoft's documentation states that no value is returned
SeeAlso: AX=001Fh
--------M-330021-----------------------------
INT 33 - MS MOUSE v6.0+ - SOFTWARE RESET
	AX = 0021h
Return: AX = status
	    FFFFh if mouse driver installed
		BX = number of buttons (FFFFh = two buttons)
	    0021h if mouse driver not installed
Note:	this call is identical to funtion 00h, but does not reset the mouse
SeeAlso: AX=0000h
--------M-330022-----------------------------
INT 33 - MS MOUSE v6.0+ - SET LANGUAGE FOR MESSAGES
	AX = 0022h
	BX = language (see #03177)
Note:	only available on international versions of the driver; US versions
	  ignore this call
SeeAlso: AX=0023h

(Table 03177)
Values for mouse driver language:
 00h	English
 01h	French
 02h	Dutch
 03h	German
 04h	Swedish
 05h	Finnish
 06h	Spanish
 07h	Portugese
 08h	Italian
--------M-330023-----------------------------
INT 33 - MS MOUSE v6.0+ - GET LANGUAGE FOR MESSAGES
	AX = 0023h
Return: BX = language (see #03177)
Note:	the US version of the driver always returns zero
SeeAlso: AX=0022h
--------M-330024BX0000-----------------------
INT 33 - MS MOUSE v6.26+ - GET SOFTWARE VERSION, MOUSE TYPE, AND IRQ NUMBER
	AX = 0024h
	BX = 0000h to check for function's existence
Return: AX = FFFFh on error
	otherwise,
	    BH = major version
	    BL = minor version
	    CH = type (1=bus, 2=serial, 3=InPort, 4=PS/2, 5=HP)
	    CL = interrupt (0=PS/2, 2=IRQ2, 3=IRQ3,...,7=IRQ7,...,0Fh=IRQ15)
Note:	although current Microsoft documentation states that this function was
	  introduced in v6.26, it appears to have been present as early as
	  v6.02 (for earlier versions, use INT 33/AX=006Dh)
SeeAlso: AX=004Dh,AX=006Dh
--------M-330025-----------------------------
INT 33 - MS MOUSE v6.26+ - GET GENERAL DRIVER INFORMATION
	AX = 0025h
Return: AX = general information (see #03178)
	BX = cursor lock flag for OS/2 to prevent reentrancy problems
	CX = mouse code active flag (for OS/2)
	DX = mouse driver busy flag (for OS/2)

Bitfields for general mouse driver information:
Bit(s)	Description	(Table 03178)
 15	driver loaded as device driver rather than TSR
 14	driver is newer integrated type
 13,12	current cursor type
	00 software text cursor
	01 hardware text cursor (CRT Controller's cursor)
	1X graphics cursor
 11-8	interrupt rate (see #03176)
 7-0	count of currently-active Mouse Display Drivers (MDD), the newer
	  integrated driver type
--------M-330026-----------------------------
INT 33 - MS MOUSE v6.26+ - GET MAXIMUM VIRTUAL COORDINATES
	AX = 0026h
Return: BX = mouse-disabled flag (0000h mouse enabled, nonzero disabled)
	CX = maximum virtual X (for current video mode)
	DX = maximum virtual Y
Note:	for driver versions before 7.05, this call returns the currently-set
	  maximum coordinates; v7.05+ returns the absolute maximum coordinates
SeeAlso: AX=0031h
--------M-330027-----------------------------
INT 33 - MS MOUSE v7.01+ - GET SCREEN/CURSOR MASKS AND MICKEY COUNTS
	AX = 0027h
Return: AX = screen-mask value (or hardware cursor scan-line start for v7.02+)
	BX = cursor-mask value (or hardware cursor scan-line stop for v7.02+)
	CX = horizontal mickeys moved since last call
	DX = vertical mickeys moved since last call
SeeAlso: AX=000Bh
--------M-330028-----------------------------
INT 33 - MS MOUSE v7.0+ - SET VIDEO MODE
	AX = 0028h
	CX = new video mode (call is NOP if 0000h)
	DH = Y font size (00h = default)
	DL = X font size (00h = default)
Return: CL = status (00h = successful)
Notes:	DX is ignored unless the selected video mode supports font size control
	when CX=0000h, an internal flag that had been set by a previous call
	  is cleared; this is required before a mouse reset
SeeAlso: AX=0029h,INT 10/AH=00h
--------M-330029-----------------------------
INT 33 - MS MOUSE v7.0+ - ENUMERATE VIDEO MODES
	AX = 0029h
	CX = previous video mode
	    0000h get first supported video mode
	    other get next supported mode after mode CX
Return: CX = first/next video mode (0000h = no more video modes)
	DS:DX -> description of video mode or 0000h:0000h if none
Notes:	the enumerated video modes may be in any order and may repeat
	the description string (if available) is terminated by '$' followed by
	  a NUL byte
SeeAlso: AX=0028h
--------M-33002A-----------------------------
INT 33 - MS MOUSE v7.02+ - GET CURSOR HOT SPOT
	AX = 002Ah
Return: AX = internal counter controlling cursor visibility
	BX = cursor hot spot column
	CX = cursor hot spot row
	DX = mouse type (see #03179)
Note:	the hot spot location is relative to the upper left corner of the
	  cursor block and may range from -128 to +127 both horizontally and
	  vertically
SeeAlso: AX=0009h,AX=0012h,AX=0035h

(Table 03179)
Values for mouse type:
 00h	none
 01h	bus
 02h	serial
 03h	InPort
 04h	IBM
 05h	Hewlett-Packard
--------M-33002B-----------------------------
INT 33 - MS MOUSE v7.0+ - LOAD ACCELERATION PROFILES
	AX = 002Bh
	BX = active acceleration profile
	    0001h-0004h or FFFFh to restore default curves
	ES:SI -> buffer containing acceleration profile data (see #03180)
Return: AX = success flag
SeeAlso: AX=002Ch,AX=002Dh,AX=0033h

Format of acceleration profile data:
Offset	Size	Description	(Table 03180)
 00h	BYTE	length of acceleration profile 1
 01h	BYTE	length of acceleration profile 2
 02h	BYTE	length of acceleration profile 3
 03h	BYTE	length of acceleration profile 4
 04h 32 BYTEs	threshold speeds for acceleration profile 1
 24h 32 BYTEs	threshold speeds for acceleration profile 2
 44h 32 BYTEs	threshold speeds for acceleration profile 3
 64h 32 BYTEs	threshold speeds for acceleration profile 4
 84h 32 BYTEs	speedup factor for acceleration profile 1
		(10h = 1.0, 14h = 1.25, 20h = 2.0, etc)
 A4h 32 BYTEs	speedup factor for acceleration profile 2
		(10h = 1.0, 14h = 1.25, 20h = 2.0, etc)
 C4h 32 BYTEs	speedup factor for acceleration profile 3
		(10h = 1.0, 14h = 1.25, 20h = 2.0, etc)
 E4h 32 BYTEs	speedup factor for acceleration profile 4
		(10h = 1.0, 14h = 1.25, 20h = 2.0, etc)
104h 16 BYTEs	name of acceleration profile 1 (blank-padded)
114h 16 BYTEs	name of acceleration profile 2 (blank-padded)
124h 16 BYTEs	name of acceleration profile 3 (blank-padded)
134h 16 BYTEs	name of acceleration profile 4 (blank-padded)
Note:	unused bytes in the threshold speed fields are filled with 7Fh and
	  unused bytes in the speedup factor fields are filled with 10h
--------M-33002C-----------------------------
INT 33 - MS MOUSE v7.0+ - GET ACCELERATION PROFILES
	AX = 002Ch
Return: AX = status (0000h success)
	BX = currently-active acceleration profile
	ES:SI -> acceleration profile data (see #03180)
SeeAlso: AX=002Bh,AX=002Dh,AX=0033h
--------M-33002D-----------------------------
INT 33 - MS MOUSE v7.0+ - SELECT ACCELERATION PROFILE
	AX = 002Dh
	BX = acceleration level
	    0001h-0004h to set profile, or FFFFh to get current profile
Return: AX = status
	    0000h successful
		ES:SI -> 16-byte blank-padded name of acceleration profile
	    FFFEh invalid acceleration curve number
		ES:SI destroyed
	BX = active acceleration curve number
SeeAlso: AX=0013h,AX=002Bh,AX=002Ch,AX=002Eh
--------M-33002E-----------------------------
INT 33 - MS MOUSE v8.10+ - SET ACCELERATION PROFILE NAMES
	AX = 002Eh
	BL = flag (if nonzero, fill ES:SI buffer with default names on return)
	ES:SI -> 64-byte buffer containing profile names (16 bytes per name)
Return: AX = status (0000h success)
	    FFFEh error for ATI Mouse driver
	ES:SI buffer filled with default names if BL nonzero on entry
Notes:	not supported by Logitech driver v6.10
	supported by ATI Mouse driver v7.04
SeeAlso: AX=002Ch,AX=002Dh,AX=012Eh,AX=022Eh
--------M-33002F-----------------------------
INT 33 - MS MOUSE v7.02+ - MOUSE HARDWARE RESET
	AX = 002Fh
Return: AX = status
Note:	invoked by mouse driver v8.20 on being called with INT 2F/AX=530Bh
SeeAlso: INT 2F/AH=53h
--------M-330030-----------------------------
INT 33 - MS MOUSE v7.04+ - GET/SET BallPoint INFORMATION
	AX = 0030h
	CX = command
	    0000h get status of BallPoint device
	    other set rotation angle and masks
		BX = rotation angle (-32768 to 32767 degrees)
		CH = primary button mask
		CL = secondary button mask
Return: AX = button status (FFFFh if no BallPoint) (see #03181)
	BX = rotation angle (0-360 degrees)
	CH = primary button mask
	CL = secondary button mask
Note:	not supported by the ATI Mouse driver which calls itself v7.04

Bitfields for BallPoint mouse button status:
Bit(s)	Description	(Table 03181)
 5	button 1
 4	button 2
 3	button 3
 2	button 4
 other	zero
--------M-330031-----------------------------
INT 33 - MS MOUSE v7.05+ - GET CURRENT MINIMUM/MAXIMUM VIRTUAL COORDINATES
	AX = 0031h
Return: AX = virtual X minimum
	BX = virtual Y minimum
	CX = virtual X maximum
	DX = virtual Y maximum
Note:	the minimum and maximum values are those set by AX=0007h and AX=0008h;
	  the default is minimum = 0 and maximum = absolute maximum
	  (see AX=0026h)
SeeAlso: AX=0007h,AX=0008h,AX=0010h,AX=0026h
--------M-330032-----------------------------
INT 33 - MS MOUSE v7.05+ - GET ACTIVE ADVANCED FUNCTIONS
	AX = 0032h
Return: AX = active function flags (FFFFh for v8.10)
	    bit 15: function 0025h supported
	    bit 14: function 0026h supported
	    ...
	    bit 0:  function 0034h supported
	BX = ??? (0000h) officially unused
	CX = ??? (E000h) officially unused
	DX = ??? (0000h) officially unused
Note:	the Italian version of MS MOUSE v8.20 reportedly indicates that
	  functions 0033h and 0034h are not supported even though they are
--------M-330033-----------------------------
INT 33 - MS MOUSE v7.05+ - GET SWITCH SETTINGS AND ACCELERATION PROFILE DATA
	AX = 0033h
	CX = size of buffer
	    0000h get required buffer size
		Return: AX = 0000h
			CX = required size (0154h for Logitech v6.10, 0159h
				for MS v8.10-8.20)
	    other
		ES:DX -> buffer of CX bytes for mouse settings
		Return: AX = 0000h
			CX = number of bytes returned
			ES:DX buffer filled (see #03182)
SeeAlso: AX=002Bh

Format of mouse settings data buffer:
Offset	Size	Description	(Table 03182)
 00h	BYTE	mouse type
 01h	BYTE	current language
 02h	BYTE	horizontal sensitivity (00h-64h)
 03h	BYTE	vertical sensitivity (00h-64h)
 04h	BYTE	double-speed threshold (00h-64h)
 05h	BYTE	ballistic curve (01h-04h)
 06h	BYTE	interrupt rate (01h-04h)
 07h	BYTE	cursor override mask
 08h	BYTE	laptop adjustment
 09h	BYTE	memory type (00h-02h)
 0Ah	BYTE	SuperVGA support (00h,01h)
 0Bh	BYTE	rotation angle
 0Ch	BYTE	???
 0Dh	BYTE	primary button (01h-04h)
 0Eh	BYTE	secondary button (01h-04h)
 0Fh	BYTE	click lock enabled (00h,01h)
 10h 324 BYTEs	acceleration profile data (see #03180)
154h  5 BYTEs	??? (Microsoft driver, but not Logitech)
--------M-330034-----------------------------
INT 33 - MS MOUSE v8.0+ - GET INITIALIZATION FILE
	AX = 0034h
Return: AX = status (0000h successful)
	ES:DX -> ASCIZ initialization (.INI) file name
--------M-330035-----------------------------
INT 33 - MS MOUSE v8.10+ - LCD SCREEN LARGE POINTER SUPPORT
	AX = 0035h
	BX = function
	    FFFFh get current settings
		Return: AX = 0000h
			BH = style (see #03183)
			BL = size (see #03184)
			CH = threshold (00h-64h)
			CL = active flag (00h disabled, 01h enabled)
			DX = delay
	    other
		BH = pointer style (see #03183)
		BL = size (see #03184)
		CH = threshold (00h-64h)
		CL = active flag (00h disable size change, 01h enable)
		DX = delay (0000h-0064h)
		Return: AX = 0000h
Note:	not supported by Logitech driver v6.10
SeeAlso: AX=0012h,AX=002Ah

(Table 03183)
Values for pointer style:
 00h	normal
 01h	reverse
 02h	transparent
SeeAlso: #03184

(Table 03184)
Values for pointer size:
 00h	small ("1")
 01h	medium ("1.5")
 02h	large ("2")
SeeAlso: #03183
--------M-33004D-----------------------------
INT 33 - MS MOUSE - RETURN POINTER TO COPYRIGHT STRING
	AX = 004Dh
Return: ES:DI -> copyright message "*** This is Copyright 1983 Microsoft" or
		"Copyright 19XX...."
Notes:	also supported by Logitech, Kraft, Genius Mouse, and Mouse Systems
	  mouse drivers
	in the Genius Mouse 9.06 driver, the ASCIZ signature "KYE" immediately
	  follows the above copyright message (KYE Corp. manufactures the
	  driver)
SeeAlso: AX=0024h,AX=006Dh,AX=0666h
--------M-33006D-----------------------------
INT 33 - MS MOUSE - GET VERSION STRING
	AX = 006Dh 'm'
Return: ES:DI -> Microsoft version number of resident driver (see #03187)
Notes:	also supported by Logitech, Mouse Systems, Kraft, and Genius mouse
	  drivers
	the Mouse Systems 7.01 and Genius Mouse 9.06 drivers report their
	  Microsoft version as 7.00 even though they do not support any of the
	  functions from 0025h through 002Dh supported by the MS 7.00 driver
	  (the Genius Mouse driver supports function 0026h, but it differs
	  from the Microsoft function)
	the TRUEDOX 4.01 driver reports its version as 6.26 through this call,
	  but as 6.24 through AX=0024h
	There seems to be no reliable method to distinguish MS MOUSE before
	  3.00 from mouse drivers of other vendors.
	Some releases of the MS MOUSE 6.00 erroneously return 6.01 instead of
	  their true version number.  In this case, a DI value of 01ABh can
	  be used to still detect a 6.00 driver.
	For returned versions 6.02+, INT 33/AX=0024h should be used to retrieve
	  more accurate version data. 
	True MS MOUSE drivers can also be identified by magic numbers in
	  their copyright message, stored in the driver's segment (ES).
	  These can be found by scanning the first 2 Kb of the mouse 
	  driver's segment for a string like: [new since 7.00+] 
	  "** This is Copyright 1983[-19xx] Microsoft ***" with the
	  magic number stored one byte after the signature string.
SeeAlso: AX=0024h,AX=004Dh,AX=006Ah,AX=266Ch

Format of Microsoft version number:
Offset	Size	Description	(Table 03187)
 00h	BYTE	major version
 01h	BYTE	minor version (BCD)

(Table 04087)
Values for Microsoft MOUSE copyright string magic numbers:
 5564h	version 3.00..6.00	(for reported versions up to 5.03, and 6.00)
 557Ch	version 6.01Z..6.24	(for reported versions 6.01..6.24)
 E806h	version 6.25		(for reported version 6.25)
 EB02h	version 6.26..7.04	(for reported version 6.26..7.04)
 0800h	Integrated driver 1.0+	(for reported version 9.x+)
Note:	Versions above 7.04 (except for integrated mouse drivers) have a magic
	  number representing their version number, e.g. 0507h for version 7.05