Decode additional Frameowork16 and AMD related memmap items

TODO:

- [ ] Handle it better than just increasing EC_MEMMAP_SIZE*2
- [ ] Figure out all items and whether they apply to Lotus and also Azalea
- [ ] Figure out Lotus and Azalea fan names

Example:

```
cargo build && sudo ./target/debug/framework_tool --driver portio --expansion-bay
AMD
  Power Slider:     DC, Battery Saver (0b0001000)
  STT Table:        7
  CBP:              true ([0, 0])
  DTT Temp:         [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Expansion Bay
  Serial Struct:    [0, 0, 0, 0]
  PD Version:       [0, 0, 0, 0]
  GPU CTRL:         0x8
    MUX Status:     GPU
    Board Status:   Present
    PCIe Config:    8x1
  Display On:       false
  GPU Type:         AMD R23M (2)
```

Reference data:

```
Fan Module
  Serial Struct:    [0, 0, 0, 0]
  Batt Manuf        2023-22-7
  PD Version:       [0, 0, 0, 0]
  GPU CTRL:         0x0
  Power Slider:     AC, Best Power Efficiency (0b1000000)
  Display On:       false
  STT Table:        13
  CBP:              true ([0, 0])
  GPU Type:         Initializing (0)
  DTT Temp:         [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]

dGPU Module
  Serial Struct:    [0, 0, 0, 0]
  Batt Manuf        2023-7-22
  PD Version:       [0, 0, 0, 0]
  GPU CTRL:         0x8
  Power Slider:     DC, Battery Saver (0b0001000)
  Display On:       false
  STT Table:        7
  CBP:              true ([0, 0])
  GPU Type:         AMD R23M (2)
  DTT Temp:         [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
```

Signed-off-by: Daniel Schaefer <[email protected]>

Author: JohnAZoidberg

framework_lib/src/chromium_ec/mod.rs

@@ -871,7 +871,7 @@ impl CrosEcDriver for CrosEc {
         }
 
         debug!("read_memory(offset={:#X}, size={:#X})", offset, length);
-        if offset + length > EC_MEMMAP_SIZE {
+        if offset + length > (EC_MEMMAP_SIZE * 2) {
             return None;
         }
 

framework_lib/src/chromium_ec/portio.rs

@@ -226,7 +226,11 @@ fn init() -> bool {
             let res = ioperm(EC_LPC_ADDR_HOST_DATA as u64, 1, 1);
             assert_eq!(res, 0);
 
-            let res = ioperm(NPC_MEMMAP_OFFSET as u64, super::EC_MEMMAP_SIZE as u64, 1);
+            let res = ioperm(
+                NPC_MEMMAP_OFFSET as u64,
+                (super::EC_MEMMAP_SIZE * 2) as u64,
+                1,
+            );
             assert_eq!(res, 0);
         }
     }

framework_lib/src/commandline/clap_std.rs

@@ -37,6 +37,10 @@ struct ClapCli {
     #[arg(long)]
     sensors: bool,
 
+    /// Print expansion bay information
+    #[arg(long)]
+    expansion_bay: bool,
+
     /// Show information about USB-C PD ports
     #[arg(long)]
     pdports: bool,
@@ -201,6 +205,7 @@ pub fn parse(args: &[String]) -> Cli {
         power: args.power,
         thermal: args.thermal,
         sensors: args.sensors,
+        expansion_bay: args.expansion_bay,
         pdports: args.pdports,
         pd_info: args.pd_info,
         dp_hdmi_info: args.dp_hdmi_info,

framework_lib/src/commandline/mod.rs

@@ -123,6 +123,7 @@ pub struct Cli {
     pub power: bool,
     pub thermal: bool,
     pub sensors: bool,
+    pub expansion_bay: bool,
     pub pdports: bool,
     pub privacy: bool,
     pub pd_info: bool,
@@ -658,6 +659,8 @@ pub fn run_with_args(args: &Cli, _allupdate: bool) -> i32 {
         power::print_thermal(&ec);
     } else if args.sensors {
         power::print_sensors(&ec);
+    } else if args.expansion_bay {
+        power::print_expansion_bay_info(&ec);
     } else if args.pdports {
         power::get_and_print_pd_info(&ec);
     } else if args.info {
@@ -838,6 +841,7 @@ Options:
       --power                Show current power status (battery and AC)
       --thermal              Print thermal information (Temperatures and Fan speed)
       --sensors              Print sensor information (ALS, G-Sensor)
+      --expansion-bay        Print expansion bay information
       --pdports              Show information about USB-C PD ports
       --info                 Show info from SMBIOS (Only on UEFI)
       --pd-info              Show details about the PD controllers

framework_lib/src/commandline/uefi.rs

@@ -61,6 +61,7 @@ pub fn parse(args: &[String]) -> Cli {
         power: false,
         thermal: false,
         sensors: false,
+        expansion_bay: false,
         pdports: false,
         pd_info: false,
         dp_hdmi_info: false,
@@ -134,6 +135,8 @@ pub fn parse(args: &[String]) -> Cli {
             found_an_option = true;
         } else if arg == "--sensors" {
             cli.sensors = true;
+        } else if arg == "--expansion-bay" {
+            cli.expansion_bay = true;
             found_an_option = true;
         } else if arg == "--pdports" {
             cli.pdports = true;

framework_lib/src/power.rs

@@ -198,8 +198,114 @@ pub fn print_sensors(ec: &CrosEc) {
     println!("ALS: {:>4} Lux", als_int);
 }
 
+pub fn print_expansion_bay_info(ec: &CrosEc) {
+    let platform = smbios::get_platform();
+    if !matches!(
+        platform,
+        Some(Platform::Framework13Amd) | Some(Platform::Framework16)
+    ) {
+        println!("Only applicable to Framework 16 and Framework AMD systems");
+        return;
+    }
+
+    println!("AMD");
+    // TODO: This is also on Azalea?
+    let power_slider = ec.read_memory(0x151, 0x02).unwrap()[0];
+    let dc_ac = if power_slider <= 0b1000 { "DC" } else { "AC" };
+    let mode = match power_slider {
+        0b0000_0001 | 0b0001_0000 => "Best Performance",
+        0b0000_0010 | 0b0010_0000 => "Balanced",
+        0b0000_0100 | 0b0100_0000 => "Best Power Efficiency",
+        0b0000_1000 => "Battery Saver",
+        _ => "Unknown Mode",
+    };
+    println!(
+        "  Power Slider:     {}, {} ({:#09b})",
+        dc_ac, mode, power_slider
+    );
+
+    // TODO: This is also on Azalea?
+    let stt_table = ec.read_memory(0x154, 0x01).unwrap()[0];
+    println!("  STT Table:        {:?}", stt_table);
+
+    // TODO: What's this? Always [0x00, 0x00] so far
+    // TODO: This is also on Azalea?
+    // Core Performance Boost
+    let cbp = ec.read_memory(0x155, 0x02).unwrap();
+    println!("  CBP:              {} ({:?})", cbp == [0x00, 0x00], cbp);
+
+    // TODO: When is this changed?
+    // TODO: This is also on Azalea?
+    let dtt_temp = ec.read_memory(0x160, 0x0F).unwrap();
+    println!("  DTT Temp:         {:?}", dtt_temp);
+
+    if !matches!(platform, Some(Platform::Framework16)) {
+        return;
+    }
+
+    println!("Expansion Bay");
+
+    // TODO: This is the serial struct in the Expansion Bay?
+    let serial_struct = ec.read_memory(0x140, 0x04).unwrap();
+    println!("  Serial Struct:    {:?}", serial_struct);
+
+    // TODO: Why is this in the same namespace?
+    // let batt_manuf_day = ec.read_memory(0x144, 0x01).unwrap()[0];
+    // let batt_manuf_month = ec.read_memory(0x145, 0x01).unwrap()[0];
+    // let batt_manuf_year = ec.read_memory(0x146, 0x02).unwrap();
+    // let batt_manuf_year = u16::from_le_bytes([batt_manuf_year[0], batt_manuf_year[1]]);
+    // println!("  Batt Manuf        {:?}-{:?}-{:?}", batt_manuf_year, batt_manuf_month, batt_manuf_day);
+
+    // TODO: This is the PD in the dGPU module?
+    let pd_ver = ec.read_memory(0x14C, 0x04).unwrap();
+    println!("  PD Version:       {:?}", pd_ver);
+
+    let gpu_ctrl = ec.read_memory(0x150, 0x01).unwrap()[0];
+    // Unused, this is for the BIOS to set
+    let _set_mux_status = match gpu_ctrl & 0b11 {
+        0b00 => "EC Received and Clear",
+        0b01 => "BIOS Set APU",
+        0b10 => "BIOS Set GPU",
+        _ => "Unknown",
+    };
+    let mux_status = if (gpu_ctrl & 0b100) > 0 { "APU" } else { "GPU" };
+    let board_status = if (gpu_ctrl & 0b1000) > 0 {
+        "Present"
+    } else {
+        "Absent"
+    };
+    // Unused, set by BIOS: (gpu_ctrl & 0b10000)
+    let pcie_config = match gpu_ctrl & 0b01100000 {
+        0b00 => "8x1",
+        0b01 => "4x1",
+        0b10 => "4x2",
+        0b11 => "Disabled",
+        _ => "Unknown",
+    };
+    println!("  GPU CTRL:         {:#x}", gpu_ctrl);
+    println!("    MUX Status:     {}", mux_status);
+    println!("    Board Status:   {}", board_status);
+    println!("    PCIe Config:    {}", pcie_config);
+
+    // TODO: This seems like it's not correctly working? It's always false
+    let display_on = ec.read_memory(0x153, 0x01).unwrap()[0];
+    println!("  Display On:       {:?}", display_on == 0x01);
+
+    let gpu_type = ec.read_memory(0x157, 0x01).unwrap()[0];
+    let gpu_name = match gpu_type {
+        0x00 => "Initializing",
+        0x01 => "Fan Only",
+        0x02 => "AMD R23M",
+        0x03 => "SSD",
+        0x04 => "PCIe Accessory",
+        _ => "Unknown",
+    };
+    println!("  GPU Type:         {} ({:?})", gpu_name, gpu_type);
+}
+
 pub fn print_thermal(ec: &CrosEc) {
     let temps = ec.read_memory(EC_MEMMAP_TEMP_SENSOR, 0x0F).unwrap();
+    println!("Temps: {:?}", temps);
     let fans = ec.read_memory(EC_MEMMAP_FAN, 0x08).unwrap();
 
     let platform = smbios::get_platform();
@@ -217,6 +323,8 @@ pub fn print_thermal(ec: &CrosEc) {
             println!("  F75303_CPU:   {:>4}", TempSensor::from(temps[1]));
             println!("  F75303_DDR:   {:>4}", TempSensor::from(temps[2]));
             println!("  APU:          {:>4}", TempSensor::from(temps[3]));
+            // TODO: Only display if dGPU is present
+            // TODO: Sometimes  these show 0 even if the GPU is present. Why?
             if matches!(platform, Some(Platform::Framework16)) {
                 println!("  dGPU VR:      {:>4}", TempSensor::from(temps[4]));
                 println!("  dGPU VRAM:    {:>4}", TempSensor::from(temps[5]));
@@ -237,7 +345,13 @@ pub fn print_thermal(ec: &CrosEc) {
     }
 
     let fan0 = u16::from_le_bytes([fans[0], fans[1]]);
-    println!("  Fan Speed:    {:>4} RPM", fan0);
+    let fan1 = u16::from_le_bytes([fans[2], fans[3]]);
+    if matches!(platform, Some(Platform::Framework16)) {
+        println!("  Fan L Speed:  {:>4} RPM", fan0);
+        println!("  Fan R Speed:  {:>4} RPM", fan1);
+    } else {
+        println!("  Fan Speed:    {:>4} RPM", fan0);
+    }
 }
 
 // TODO: Use Result