About Wind Sector Management setting

[shasegawa-2211]

Hi,

I’m proceeding with the Wind Sector Management(WSM) configuration by referring to the example page: Wind sector management,
but it does not apply to the turbines I specify.

For example, even if I create rules with settings like those shown in this table, when I check the results, the WSM is applied not to the turbine specified by tname but inconsistently to turbines like WT10 or WT15. The combinations of wind speed and wind direction are correct.
"turbine"column is added after calculation by foxes automatically.

	tname	WD_min	WD_max	WS_min	WS_max	MAXP	turbine
rule
0	WT01	0	20	3	99	0	0
1	WT02	20	40	3	99	100	1
2	WT03	40	60	3	99	200	2

Please point out what I should fix, or let me know if there is any other information you need.

Below, I show the script I’m using and the contents of the variables.
I hope this might provide some clues.

Farm(foxes.WindFarm) display

Turbine 0, WT01: xy=(xxxxxx.92, yyyyyyy.23), NREL5MW, sector_rules, PMask
Turbine 1, WT02: xy=(xxxxxx.46, yyyyyyy.48), NREL5MW, sector_rules, PMask
Turbine 2, WT03: xy=(xxxxxx.37, yyyyyyy.68), NREL5MW, sector_rules, PMask

WSM input part.

rules = pd.read_csv(r"E:\foxes\samle\WSM_rules.csv", index_col=0)
mbook.turbine_models["sector_rules"] = foxes.models.turbine_models.SectorManagement(
    data_source=rules,
    col_tnames="tname",
    range_vars=[FV.WD, FV.REWS],
    target_vars=[FV.MAX_P],
    colmap={"REWS_min": "WS_min", "REWS_max": "WS_max"},
)

farm layout input part.

farm = foxes.WindFarm()
foxes.input.farm_layout.add_from_csv(
    farm,
    rayout_file,
    col_x="easting",
    col_y="northing",
    col_name="name",
    col_H="height",
    turbine_models=[wt_name, "sector_rules", "PMask"],
)

[SchmJo]

Thanks for posting this problem. Could you please re-post it as an issue, rather than a discussion? Please include a description how the issue can be reproduced. Thanks & cu there

[shasegawa-2211]

Thank you for your quick responce!
I will follow your comment.