From e6c33bcc8ecb7333e92d300eade79f785075c9ad Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Fr=C3=A9d=C3=A9ric=20Metrich?=
 <45318189+FredM67@users.noreply.github.com>
Date: Sun, 14 Apr 2024 15:30:03 +0200
Subject: [PATCH] Re-calib

---
 Mk2_3phase_RFdatalog_temp/calibration.h   | 2 +-
 Mk2_3phase_RFdatalog_temp/config_system.h | 2 +-
 dev/cal_CTx_v_meter/main.cpp              | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Mk2_3phase_RFdatalog_temp/calibration.h b/Mk2_3phase_RFdatalog_temp/calibration.h
index 2819deb8..814b0399 100644
--- a/Mk2_3phase_RFdatalog_temp/calibration.h
+++ b/Mk2_3phase_RFdatalog_temp/calibration.h
@@ -31,7 +31,7 @@
 // powerCal is the RECIPROCAL of the power conversion rate. A good value
 // to start with is therefore 1/20 = 0.05 (Watts per ADC-step squared)
 //
-inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.043950F, 0.045235F, 0.042788F };
+inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.042196F, 0.043512F, 0.040156F };
 //
 // f_phaseCal is used to alter the phase of the voltage waveform relative to the current waveform.
 // The algorithm interpolates between the most recent pair of voltage samples according to the value of f_phaseCal.
diff --git a/Mk2_3phase_RFdatalog_temp/config_system.h b/Mk2_3phase_RFdatalog_temp/config_system.h
index ef3a41ad..6439ea5e 100644
--- a/Mk2_3phase_RFdatalog_temp/config_system.h
+++ b/Mk2_3phase_RFdatalog_temp/config_system.h
@@ -20,7 +20,7 @@ inline constexpr uint8_t NO_OF_PHASES{ 3 }; /**< number of phases of the main su
 
 //--------------------------------------------------------------------------------------------------
 // for users with zero-export profile, this value will be negative
-inline constexpr int16_t REQUIRED_EXPORT_IN_WATTS{ 20 }; /**< when set to a negative value, this acts as a PV generator */
+inline constexpr int16_t REQUIRED_EXPORT_IN_WATTS{ 0 }; /**< when set to a negative value, this acts as a PV generator */
 
 //--------------------------------------------------------------------------------------------------
 // other system constants, should match most of installations
diff --git a/dev/cal_CTx_v_meter/main.cpp b/dev/cal_CTx_v_meter/main.cpp
index d6988782..377dc44d 100644
--- a/dev/cal_CTx_v_meter/main.cpp
+++ b/dev/cal_CTx_v_meter/main.cpp
@@ -127,7 +127,7 @@ constexpr int16_t ADCDuration{ 104 };  // Time in microseconds for one ADC conve
 // powerCal is the RECIPR0CAL of the power conversion rate. A good value
 // to start with is therefore 1/20 = 0.05 (Watts per ADC-step squared)
 //
-inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.043950F, 0.045235F, 0.042788F };
+inline constexpr float f_powerCal[NO_OF_PHASES]{ 0.042196F, 0.043512F, 0.040156F };
 
 // f_phaseCal is used to alter the phase of the voltage waveform relative to the
 // current waveform. The algorithm interpolates between the most recent pair