ci-rpm.yml

name: "CI RPM"

on:
  push:
    branches-ignore:
      - coverity_scan
  pull_request:

env:
  CI: 1
  CI_TEST_USER: tapioca
  CI_TEST_PASS: queijo
  GH_ACTIONS: 1

jobs:
  pre-ci:
    runs-on: ubuntu-latest
    # Map a step output to a job output
    outputs:
      should_skip: ${{ steps.skip_check.outputs.should_skip }}
    steps:
      - id: skip_check
        uses: fkirc/skip-duplicate-actions@master

  rpm-build:
    #  If branch protection is in place with status checks enabled, ensure
    #  names are updated if new matrix entries are added or the name format
    #  changes.
    name: "RPM Build (${{ matrix.env.NAME }})"

    needs: pre-ci
    if: ${{ needs.pre-ci.outputs.should_skip != 'true' }}

    runs-on: ubuntu-latest

    container:
      image: ${{ matrix.env.OS }}

    strategy:
      fail-fast: false
      matrix:
        env:
          - { "NAME": "stream-8", "OS": "tgagor/centos-stream:stream8",  "DIST": "centos" }
          - { "NAME": "rocky-8",  "OS": "rockylinux/rockylinux:8",       "DIST": "rocky"  }
          - { "NAME": "rocky-9",  "OS": "rockylinux/rockylinux:9",       "DIST": "rocky"  }

    steps:
    - name: Extra repos for CentOS and Rocky Linux 8
      if: ${{ matrix.env.NAME == 'stream-8' || matrix.env.NAME == 'rocky-8' }}
      run: |
        echo '[ltb-project]'                                              >  /etc/yum.repos.d/ltb-project.repo
        echo 'name=LTB project packages'                                  >> /etc/yum.repos.d/ltb-project.repo
        echo 'baseurl=https://ltb-project.org/rpm/$releasever/$basearch'  >> /etc/yum.repos.d/ltb-project.repo
        echo 'enabled=1'                                                  >> /etc/yum.repos.d/ltb-project.repo
        echo 'gpgcheck=1'                                                 >> /etc/yum.repos.d/ltb-project.repo
        echo 'gpgkey=https://www.ltb-project.org/documentation/_static/RPM-GPG-KEY-LTB-project' >> /etc/yum.repos.d/ltb-project.repo
        rpm --import https://www.ltb-project.org/documentation/_static/RPM-GPG-KEY-LTB-project
        yum install -y epel-release

    - name: Enable PowerTools / CRB
      run: |
        yum install -y yum-utils dnf-plugins-core
        yum config-manager --enable PowerTools || :
        yum config-manager --enable powertools || :
        yum config-manager --enable crb || :

    - name: Enable EPEL for Rocky Linux 9
      if: ${{ matrix.env.NAME == 'rocky-9' }}
      run: |
        yum install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-9.noarch.rpm

    - name: Set up NetworkRADIUS extras repository
      run: |
        echo '[networkradius-extras]'                                                               >  /etc/yum.repos.d/networkradius-extras.repo
        echo 'name=NetworkRADIUS-extras-$releasever'                                                >> /etc/yum.repos.d/networkradius-extras.repo
        echo 'baseurl=http://packages.networkradius.com/extras/${{ matrix.env.DIST }}/$releasever/' >> /etc/yum.repos.d/networkradius-extras.repo
        echo 'enabled=1'                                                                            >> /etc/yum.repos.d/networkradius-extras.repo
        echo 'gpgcheck=1'                                                                           >> /etc/yum.repos.d/networkradius-extras.repo
        echo 'gpgkey=https://packages.networkradius.com/pgp/packages@networkradius.com'             >> /etc/yum.repos.d/networkradius-extras.repo
        rpm --import https://packages.networkradius.com/pgp/packages@networkradius.com

    - name: Install common tools
      run: |
        yum install -y rpm-build openssl make gcc perl git-core

    - name: "Install common tools"
      run: |
        yum install -y \
          yum-utils \
          bzip2 \
          gcc \
          hostname \
          make \
          perl \
          procps-ng \
          rpm-build \
          psmisc \
          sudo

    - uses: actions/checkout@v3
      with:
        path: pam_radius

    # Build Package
    - name: "Install build dependencies"
      run: |
        yum-builddep -y redhat/pam_radius_auth.spec
      working-directory: pam_radius

    - name: "Build RPMs"
      run: |
        [ -r /opt/rh/devtoolset-8/enable ] && source /opt/rh/devtoolset-8/enable || :
        make rpm
      working-directory: pam_radius

    - name: "Collect RPMs"
      run: |
        mkdir -p rpms/
        mv rpmbuild/RPMS/x86_64/*.rpm rpms/
      working-directory: pam_radius

    - name: "Install .rpm packages"
      run: |
        rpm -ivh rpms/pam*.rpm
      working-directory: pam_radius

    - name: "Show infos of the .rpm package"
      run: |
        rpm -qi pam_radius_auth

    - name: "List content of the .rpm package"
      run: |
        rpm -qs pam_radius_auth

    - name: "Create the CI_TEST_USER user in /etc/passwd (no-password)"
      run: |
        sudo useradd -d /tmp ${CI_TEST_USER}
        id ${CI_TEST_USER}

    - name: "Setup FreeRADIUS/SSHD/SYSLOG-NG/PAM then run full CI tests"
      run: |
        sudo yum -y update
        sudo yum -y install \
                freeradius freeradius-utils \
                syslog-ng \
                openssh-server sshpass

        echo "#######################################################"
        echo "## Stop the services syslog-ng/sshd/freeradius"
        ( sudo rm -f /var/log/secure && \
          sudo touch /var/log/secure && \
          sudo chmod 600 /var/log/secure
        )
        sudo killall -q -9 syslog-ng radiusd sshd || :
        # https://stackoverflow.com/questions/47973554/how-to-let-syslog-workable-in-docker
        sudo sed -i 's/system()/# system()/g' /etc/syslog-ng/syslog-ng.conf
        sudo /usr/sbin/syslog-ng --no-caps

        echo "#######################################################"
        echo "## Setup the services"
        export CI_TEST_USER="$CI_TEST_USER" CI_TEST_PASS="$CI_TEST_PASS"
        for i in setup-pam_radius.sh setup-freeradius.sh setup-sshd.sh; do
            script="${PWD}/scripts/ci/$i"

            echo "Calling $script"
            sudo -E $script
        done

        echo "#######################################################"
        echo "## Start the services sshd"
        echo | sudo ssh-keygen -A
        sudo /usr/sbin/sshd
        sudo rm -f /run/nologin # Needed to enable the log in!

        echo "## Start the services radiusd"
        ( sudo make -C /etc/raddb/certs/ destroycerts all && \
          sudo sed 's/dh_file =/#dh_file =/g' -i /etc/raddb/mods-available/eap && \
          sudo chmod 0644 /etc/raddb/certs/server.pem
        )
        sudo /usr/sbin/radiusd

        echo "#######################################################"
        echo "## Show processes"
        ps aux | grep -E "([r]adius|[s]sh|[s]yslog)"
      working-directory: pam_radius

    - name: "Content of /etc/ssh/sshd_config"
      run: |
        sudo cat /etc/ssh/sshd_config

    - name: "Content of /etc/pam.d/sshd"
      run: |
        sudo cat /etc/pam.d/sshd

    - name: "Content of /etc/pam_radius_auth.conf"
      run: |
        sudo cat /etc/pam_radius_auth.conf

    - name: "Validate freeradius instance using radtest"
      run: |
        radtest -x $CI_TEST_USER $CI_TEST_PASS localhost 0 testing123

    - name: "Run ssh authorization over pam_radius"
      run: |
        if ! sshpass -p "${CI_TEST_PASS}" -v \
          /usr/bin/ssh -T -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -p 22 ${CI_TEST_USER}@localhost id; then
            echo "ERROR: Something goes wrong with the SSH + PAM_RADIUS authentication!"
            echo "############## Show the logs in /var/log/secure"
            sudo tail -35 /var/log/secure
            exit 1
        fi

    - name: "Looking for 'pam_radius_auth: authentication succeeded' in /var/log/secure"
      run: |
        echo "#######################################################"
        echo "## Show the logs in /var/log/secure"
        sudo cat -n /var/log/secure

        # if ! grep -q "pam_radius_auth: authentication succeeded" /var/log/secure; then
        #   echo "ERROR: Something goes wrong with the SSH + PAM_RADIUS authentication!"
        #   exit 1
        # fi

    #
    #  If the CI has failed and the branch is ci-debug then we start a tmate
    #  session to provide interactive shell access to the session.
    #
    #  The SSH rendezvous point will be emitted continuously in the job output,
    #  which will look something like:
    #
    #      SSH: ssh VfuX8SrNuU5pGPMyZcz7TpJTa@sfo2.tmate.io
    #
    #  For example:
    #
    #      git push origin ci-debug --force
    #
    #  Look at the job output in: https://github.com/FreeRADIUS/freeradius-server/actions
    #
    #      ssh VfuX8SrNuU5pGPMyZcz7TpJTa@sfo2.tmate.io
    #
    #  Access requires that you have the private key corresponding to the
    #  public key of the GitHub user that initiated the job.
    #
    - name: "Debug: Start tmate"
      uses: mxschmitt/action-tmate@v3
      with:
        limit-access-to-actor: true
      if: ${{ github.ref == 'refs/heads/ci-debug' && failure() }}