Please share the versions of GPU, PyTorch, CUDA, Python, and Linux.

[SuanCai-Fish]

Please share the versions of GPU, PyTorch, CUDA, Python, and Linux that allow you to run Genesis properly, so I can use them as a reference.

[Habatakurikei]

Hi, I have just resolved my case.

My environment:

• Mac Studio
• Python 3.10.16 (Anaconda/conda 24.7.1)
• Sequoia 15.2
• M2 Ultra
• torch 2.5.1

Commands:
conda create --name genesis python=3.10 -y
conda activate genesis
python -m pip install genesis-world
python -m pip install torch torchvision torchaudio
python render_on_macos.py -v

Hope if it helps your case. Thanks.

[Xu-Xuanhui]

Intel 14700, NVIDIA 4070,
Ubuntu 22.04 , NVIDIA535, CUDA 12.2
python 3.10
torch 2.2
It is easy to install genesis. The default version of PyOpenGL is 3.1.7, but it will encounter errors during runtime. I found that version 3.1.4 of PyOpenGL can be used. As the user guider reporting, if you followed 2.A and see “GLIBCXX_3.4.30 not found”.
cd ~/anaconda3/envs/genesis/lib
mv libstdc++.so.6 libstdc++.so.6.old
ln -s /usr/lib/x86_64-linux-gnu/libstdc++.so.6 libstdc++.so.6

However, LuisaRender has strict requirements for Ubuntu and CUDA versions.

[DuinoDu]

Hi, I have just resolved my case.

My environment:

• Mac Studio
• Python 3.10.16 (Anaconda/conda 24.7.1)
• Sequoia 15.2
• M2 Ultra
• torch 2.5.1

Commands: conda create --name genesis python=3.10 -y conda activate genesis python -m pip install genesis-world python -m pip install torch torchvision torchaudio python render_on_macos.py -v

Hope if it helps your case. Thanks.

@Habatakurikei Hi, just curious about genesis on mac. Do you meet OpenGL.error.GLError (#165) when executing python render_on_macos.py -v?

OpenGL.error.GLError: GLError(
	err = 1282,
	description = b'invalid operation',
	baseOperation = glBindFramebuffer,
	cArguments = (GL_DRAW_FRAMEBUFFER, 0)

[Habatakurikei]

Hi, I have just resolved my case.
My environment:

• Mac Studio
• Python 3.10.16 (Anaconda/conda 24.7.1)
• Sequoia 15.2
• M2 Ultra
• torch 2.5.1

Commands: conda create --name genesis python=3.10 -y conda activate genesis python -m pip install genesis-world python -m pip install torch torchvision torchaudio python render_on_macos.py -v
Hope if it helps your case. Thanks.

@Habatakurikei Hi, just curious about genesis on mac. Do you meet OpenGL.error.GLError (#165) when executing python render_on_macos.py -v?

OpenGL.error.GLError: GLError(
	err = 1282,
	description = b'invalid operation',
	baseOperation = glBindFramebuffer,
	cArguments = (GL_DRAW_FRAMEBUFFER, 0)

No, I did not face any error including GLError through that setup.
I attach a video how python render_on_macos.py -v worked on my Mac studio.

Ah4cGpFoqL2CjXe8.mp4

[oscar-lima]

• GPU: Quadro RTX 4000
• PyTorch version: 2.5.1+cu121
• CUDA Version: 12.2
• Python version: 3.10.9 (via pyenv)
• Linux: Ubuntu 20.04

[analogjedi]

Hi, I have just resolved my case.

My environment:

• Mac Studio
• Python 3.10.16 (Anaconda/conda 24.7.1)
• Sequoia 15.2
• M2 Ultra
• torch 2.5.1

Commands: conda create --name genesis python=3.10 -y conda activate genesis python -m pip install genesis-world python -m pip install torch torchvision torchaudio python render_on_macos.py -v

Hope if it helps your case. Thanks.

@Habatakurikei , thank you for posting this! I have been struggling to make any progress with a Python virtual environment (tried both Python 12 and 11). I did not try Python 10 in the venv so I am not sure if that was the reason..... but I did use your recipe with Miniconda on my Mac M3 and it finally worked! :-)

[bradmcgo]

Environment Details

Operating System

• Ubuntu 22.04

Python Environment (inside of a Conda environment)

• Python 3.9
• PyTorch 2.5.1

GPU Setup

• CUDA 12.2
• NVIDIA Driver 535
• Hardware: RTX 3080Ti

Nvidia driver/CUDA Installation Steps

CUDA Installation

• Removed everything Nvidia from my system (somewhat recklessly):
  sudo apt-get remove --purge '^nvidia-.'
  sudo apt autoremove
  sudo apt autoclean
  sudo rm -rf /usr/local/cuda
  sudo rm -rf /lib/modprobe.d/nvidia-installer-*
  sudo rm -rf /etc/modprobe.d/nvidia-installer-*
  sudo rm -rf /usr/lib/modprobe.d/nvidia-installer-*
  Reboot

• Used CUDA 12.2.2 runfile installer from NVIDIA Developer site (Ignore existing driver warning. Select 'Continue', uncheck the Driver in the installer and only install CUDA, CUDA Demo Suite, and CUDA Documentation): https://developer.nvidia.com/cuda-12-2-2-download-archive?target_os=Linux&target_arch=x86_64&Distribution=Ubuntu&target_version=22.04&target_type=runfile_local

• Target: Ubuntu 22.04, x86_64

NVIDIA Driver Installation

• Installed via ubuntu-drivers: https://ubuntu.com/server/docs/nvidia-drivers-installation
• Command: sudo ubuntu-drivers install nvidia:535

✅ Confirmed working with LuisaRender