[bug] Multiple issues

[NOCH2004]

• EnderIO fluid conduit don't work on rockhounding transposers or fluid input system. way to circumvent this is with and EnderIO tank set to "push" the fluid into the fluid input system. Same workaround goes for transposers.
• the vapor deposition chamber ain't working, components are in, pressure and heat go up as if to craft, but no craft actually happens.
• tried all 3 of the latest verions and none of the problems were fixed.
• friend who plays the same pack says everything works fine.

[Primitive-Human]

It helps more if you provided which pack you're playing on including screenshots of your setups and machine GUIs, because I can't reproduce any of your issues with the latest EnderIO version (5.2.66) and RH Chemistry (3.57).
You say that your friend who plays the same pack everything works fine, so did you ask him to check your setup first?

[NOCH2004]

The modpack is "Multiblock Madness 1.0.4"

Vapor distilillation before recipe selection and activation (newly placed)
note no pressure or heat

Vapor distillation after recipe selection and activation
note the increase in pressure and heat

but no crafting is happening

Setup, 2 witnesses confirm it correct according to the book and according to themselves as they replicated the setup.


Recipe:



Input filters and tanks


Transposer with EnderIO tank workaround. oxygen is from Nuclearcraft


Tank is set to "push" liquid into the transposer.

Transposer buffer was voided, and the tank starts to fill the transposer up. pictures taken seconds apart.


Transposer with just an EnderIO conduit


Light blue colour in the conduit indicates liquid is present
(right with liquid, left in newly placed and never connected)

Upgrades if it matters, both pressure (casing) and heat (insulation) as well as speed 5

Fluid input system with just a fluid conduit attacjed to it.


tank has been voided 3 seconds before pic, no liquid has been inputted. (structure is lab oven)

EnderIO Tank has been placed.


Set to "Push" into the fluid input system.

Input system starts filling up from the tank.

[Primitive-Human]

Your multiblock is not built correctly: the two gas pressurizer blocks need to be right behind the pressure vessel and server block (so facing the first separator block). I replicated your 'no crafting' issue by placing the gas pressurizer blocks at the second separator block. The temperature and pressure did increase, but no crafting was performed. So try that first.

I will take another look at the fluid conduit issues and see if it's indeed broken or not.

[NOCH2004]

Now it crafts, I am so sorry for wasting your time on that. I also feel incredibly dumb.
Thanks for the help with the multiblock.

[GlobbyPotato]

Hello ,sorry for the delay. No panic, the mod can be abstruse concerning the multiblocks and a plan is being made for this. Glad is sorted.

About the EnderIO conduits I'm not sure actually, the mod is designed to have them as companion because very efficient. Keep in mind that some machines like the lab oven may start accepting fluids and ingredients only when the activation button is ON. The filter is set automatically by the recipe so it will start going itself.
About the transposer, if both input and output are gases, you cannot use the conduit to extract it but the gas pipeline to inject the gas into a mod vessel/holder. If the intention is to create a standard fluid version of the oxygen to be used outside Rockhounding, you can use the conduit. in this case, something is going wrong if it's not working.

This below is the general rule for Transposer:
#84 (comment)

[NOCH2004]

with the oxygen, i'm using a Nuclearcraft centrifuge to separate compressed air because it's faster and less complex than the RH:C version. therefore the oxygen comes out as a fluid, hence the fluid pipe, a fluid which then I have to transpose into a Rockhounding gas.

if both input and output are gases, you cannot use the conduit to extract it but the gas pipeline to inject the gas into a mod vessel/holder.

I feel like there was a miunderstanding.
Liquid conduit with Nuclearcraft Oxygen into a EnderIO tank for the conduit workaround into the transposer, transposer then outputs the gas using the rockhounding pipe system into a pressure vessel to then use in the machine.
Oxygen production --> tank --> transposer --> gas pipeline pump --> gas pipeline --> holder

[GlobbyPotato]

The setup is correct then. That's strange, as long as it's a valid fluid it should enter the input from the pipe already.

[NOCH2004]

is there so kind of log I can send to facilitite the bug finding?

[GlobbyPotato]

I think I understood the issue. The blue plug is dedicated to gas hook. try to hook the conduit to any other side not dedicated to gas pipeline.

Also I remembered I wanted to add extra options to the Transposer to finish it, but probably forgot to do it. You can originally transpose depending on the type of input: gas to gas, fluid to fluid. Will check when possible.