Add waveshare esp32-s3-touch-lcd-7

[Amadeus71r]

Can you, please, add display waveshare esp32-s3-touch-lcd-7.

https://www.waveshare.com/product/mcu-tools/development-boards/esp32/esp32-s3-touch-lcd-7.htm

[Amadeus71r]

This configuration works.

Discussion about .ini file: https://github.com/HASwitchPlate/openHASP/discussions/602

;***************************************************
;
;   Waveshare ESP32-S3-Touch-LCD-4.3                ;
;               - 16-bit RGB TFT                                    ;
;               - GT911 touch controller                       ;
;***************************************************;


[ws_esp32_s3_touch]
extends = arduino_esp32s3_v2, flash_8mb
board = esp32-s3-devkitc-1
board_build.arduino.memory_type = qio_opi

build_flags =
    ${arduino_esp32s3_v2.build_flags}
    ${esp32s3.ps_ram}
    ;-DARDUINO_USB_CDC_ON_BOOT
	;-DUSE_USB_CDC_CONSOLE

;region -- ArduinoGFX build options ------------------------
    -D HASP_USE_ARDUINOGFX=1
    -D HASP_LV_USE_SW_ROTATE=1
;endregion

lib_deps =
    ${arduino_esp32s3_v2.lib_deps}
    ${arduinogfx.lib_deps}
    Arduino_RPi_DPI_RGBPanel_mod
    ${goodix.lib_deps}

[env:ws_esp32_s3_touch_lcd_7]
extends = ws_esp32_s3_touch

build_flags =
    -D HASP_MODEL="Waveshare ESP32-S3-Touch-LCD-7"
    ${ws_esp32_s3_touch.build_flags}
    ; Bus Settings
    -D LV_VDB_SIZE=76800 ; 10% of full framebuffer
    -D TFT_WIDTH=800
    -D TFT_HEIGHT=480
    -D TFT_DE=5 
    -D TFT_VSYNC=3 
    -D TFT_HSYNC=46 
    -D TFT_PCLK=7 
    -D TFT_B0=14 
    -D TFT_B1=38 
    -D TFT_B2=18 
    -D TFT_B3=17 
    -D TFT_B4=10 
    -D TFT_G0=39 
    -D TFT_G1=0 
    -D TFT_G2=45 
    -D TFT_G3=48 
    -D TFT_G4=47 
    -D TFT_G5=21 
    -D TFT_R0=1 
    -D TFT_R1=2 
    -D TFT_R2=42 
    -D TFT_R3=41 
    -D TFT_R4=40 
    -D TFT_BCKL=6  ; use GPIO06 as backlight PIN 
    ; Panel Settings
    -D TFT_HSYNC_POLARITY=0
    -D TFT_HSYNC_BACK_PORCH=43     ; Typical HSYNC Back Porch
    -D TFT_HSYNC_FRONT_PORCH=8  ; Maximum HSYNC Front Porch
    -D TFT_HSYNC_PULSE_WIDTH=10    ; Typical HSYNC Pulse Width
    -D TFT_VSYNC_POLARITY=0
    -D TFT_VSYNC_BACK_PORCH=12   ; Typical VSYNC Back Porch
    -D TFT_VSYNC_FRONT_PORCH=8   ; Maximum VSYNC Front Porch
    -D TFT_VSYNC_PULSE_WIDTH=8    ; Typical VSYNC Pulse Width
    -D TFT_PCLK_ACTIVE_NEG=1    ; 0
    -D TFT_PREFER_SPEED=13900000  ; 1/2 of Typical DCLK Frequency
    -D TFT_AUTO_FLUSH=1
    ; Touch Settings
    -D TOUCH_WIDTH=800
    -D TOUCH_HEIGHT=480
    -D TOUCH_DRIVER=0x911
    -D TOUCH_SCL=9
    -D TOUCH_SDA=8
    -D TOUCH_IRQ=-1
    -D TOUCH_RST=-1
    -D I2C_TOUCH_ADDRESS=0x5d ; or 0x5D
    -D I2C_TOUCH_FREQUENCY=400000
    -D BACKLIGHT_FREQUENCY=1000 ;adopted frerquency for MP3302DJ-LF-Z (200 to 1000Hz) ->higher is better for sound!
lib_deps =
    ${sunton-esp32-s3-tft.lib_deps}
    ${goodix.lib_deps}