修改、添加、移除、更新已安装版本的 optifine、forge 等组件和模组加载器 #227
Replies: 26 comments 24 replies
-
|
enmmm这边提供一个解决方案（也是我现在在用的方法） 把待更改版本的所有有用的文件放到一个临时目录，执行一个新的自动安装，然后把之前的文件copy过去完事 这个实现理论上可以最大程度减少对原有代码的更改（？ |
Beta Was this translation helpful? Give feedback.
-
反过来，能不能执行一个新版本的自动安装，然后把新的文件覆盖到旧的版本里呢？ |
Beta Was this translation helpful? Give feedback.
-
好天才的想法👍 |
Beta Was this translation helpful? Give feedback.
-
|
事实上curseforge发布了自己的客户端，可以在那里手动更新有新版本的mod(不知道为啥curseforge把自动更新都做出来了，还非得让你把每个有新版本的mod点一下更新按钮才更新)，而且绝对不会有误判版本号的问题(毕竟是官方)。所以说只要愿意的话可以用windows的mklink指令把curseforge的mod更新路径挂载到pcl2的mod路径下面实现更新(是的它不能手动选择mod文件夹路径)。不过问题就是这玩意对于网络环境要求很高，或者说你至少要有能够流畅访问和下载curseforge上的mod的网络环境才能正常使用它。不然的话就用hmcl上的自动mod更新吧，就是会有版本误判的问题，可能会导致更新完之后游戏直接打不开了。 |
Beta Was this translation helpful? Give feedback.
-
|
我是能流暢載入curseforge |
Beta Was this translation helpful? Give feedback.
-
|
但是CurseForge的客户端仍然采用官方启动器内核，所以……懂的都懂…… |
Beta Was this translation helpful? Give feedback.
-
|
@ajdgsu 事实上这个discussion的主题是修改自动安装组件（Forge/OptiFine等），而不是自动更新mod |
Beta Was this translation helpful? Give feedback.
-
|
这个是实用,multiMC就有,切换版本很快 |
Beta Was this translation helpful? Give feedback.
-
|
其实挺好使的，有些模组需要配置低版本的OP，实用！ |
Beta Was this translation helpful? Give feedback.
-
|
这个功能还行，至少HMCL就有这个功能，在pcl上也弄个 |
Beta Was this translation helpful? Give feedback.
-
|
没错，但是HMCL修改不了PCL下载的ModLoader |
Beta Was this translation helpful? Give feedback.
-
|
这个超实用，更新模组就不用老是重新下载安装新组件，对我这种又懒又想玩新内容的人特别友好 |
Beta Was this translation helpful? Give feedback.
-
|
我现在就是在PCL2上安装版本并启动，在HMCL上修改现有版本 |
Beta Was this translation helpful? Give feedback.
-
|
为啥我这修改不了😕 |
Beta Was this translation helpful? Give feedback.
-
|
其他启动器安装的核心不支持修改 |
Beta Was this translation helpful? Give feedback.
-
那他咋搞的 |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
话说#220 标题改了，这个标题是不是也应该改改？ |
Beta Was this translation helpful? Give feedback.
-
|
我觉得“修改”就已经包含了添加、移除、更换版本（更新）的意思吧 |
Beta Was this translation helpful? Give feedback.
-
我指的是还有Fabric、Liteloader等... |
Beta Was this translation helpful? Give feedback.
-
|
意思差不多（）问题不大，只要 optifine 的和 forge 的做了肯定其他也都会一起做的不是嘛（ |
Beta Was this translation helpful? Give feedback.
-
我之前就因为标题问题发了个重复的is，然后龙猫就改了标题（ |
Beta Was this translation helpful? Give feedback.
-
|
確實有用，遊戲崩潰就可以直接禁用了 |
Beta Was this translation helpful? Give feedback.
-
|
实际上，简单修改一下版本目录/PCL/Setup.ini就可以选择使用哪个版本的forge了 |
Beta Was this translation helpful? Give feedback.
-
|
/PCL/Setup.ini？ |
Beta Was this translation helpful? Give feedback.
-
|
It just works. |
Beta Was this translation helpful? Give feedback.
-
是的 首先在PCL2上没法改 其次是改了还会还原 最后是没的可视化 |
Beta Was this translation helpful? Give feedback.
-
|
我是個不會改的人，要怎麼辦
FakemanG ***@***.***> 於 2023年12月9日 週六 13:29 寫道：
… /PCL/Setup.ini？ 这不是启动器配置文件么
是的 首先在PCL2上没法改 其次是改了还会还原 最后是没的可视化
—
Reply to this email directly, view it on GitHub
<#227 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUR2BKBK3AU5ABQM3N4VU53YIPZM3AVCNFSM6AAAAAARF4ORJSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TQMBVGQYDG>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
提示：/PCL/Setup.ini 属于启动器配置文件，通常来讲你不应当修改它 |
Beta Was this translation helpful? Give feedback.
-
|
是的，通常来讲你不应当修改它 除非你所要更新的整合包Forge版本有变动，而你又找不到/不会移动 整合包（键位类的）配置文件的话，你可以试着修改（不一定有用） |
Beta Was this translation helpful? Give feedback.
-
|
具体的做法是(如果你一定要尝试的话)： |
Beta Was this translation helpful? Give feedback.
-
|
那我想改怎麼辦（（
凌云 ***@***.***> 於 2023年12月9日 週六 22:51 寫道：
… 提示：/PCL/Setup.ini 属于启动器配置文件，通常来讲你不应当修改它
—
Reply to this email directly, view it on GitHub
<#227 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUR2BKDWJDMSWUJYWNXABITYIR3FJAVCNFSM6AAAAAARF4ORJSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TQMBXGQYDC>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
|
話說為什麼啟動腳本都不能使用？
FakemanG ***@***.***> 於 2023年12月9日 週六 23:03 寫道：
… 具体的做法是(如果你一定要尝试的话)：
1.安装你要使用的Forge(在.minecraft\libraries\net\minecraftforge\forge里检查你是否安装了这个版本的Forge)
2.打开该版本的\PCL\Setup.ini
3.在打开PCL后将版本号更改为你需要的版本号
—
Reply to this email directly, view it on GitHub
<#227 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUR2BKGBCBORIJVUHVIEQFDYIR4URAVCNFSM6AAAAAARF4ORJSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TQMBXGQ3DO>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
这个很实用，隔壁hmcl就有，希望尽快更新 |
Beta Was this translation helpful? Give feedback.
-
|
想要快搞，确实很有用 |
Beta Was this translation helpful? Give feedback.
-
|
话说票数这么高，龙猫为啥不做呀（bushi |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
还有更高的呢，只不过投票帖已经删了，在做了 |
Beta Was this translation helpful? Give feedback.
-
看样子一时半会还不行 |
Beta Was this translation helpful? Give feedback.
-
|
可能萌新们需要这个功能? |
Beta Was this translation helpful? Give feedback.
-
|
票数2023啦，希望能快点实现！ |
Beta Was this translation helpful? Give feedback.
-
|
在制作该功能之前有一些问题需要讨论 由于这里垃圾信息太多，见 #4220 |
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
|
你可以去用 HMCL，请不要在这里跳脸 |
Beta Was this translation helpful? Give feedback.
This comment was marked as spam.
This comment was marked as spam.
-
|
为什么不包括fabric |
Beta Was this translation helpful? Give feedback.
-
|
原 Issue 修改了标题 |
Beta Was this translation helpful? Give feedback.
-
|
此帖包括所有组件，即会支持修改 Forge / OptiFine / NeoForge / Fabric / Quilt |
Beta Was this translation helpful? Give feedback.
and others
-
描述
例如PCL2加载optifine不以mod的形式，用户难以自己更改。
原因
作者让来提的呢~~~
查看原始 Issue：#220
你可以点击左下角的
↑按钮进行投票，开发者会优先处理票数较高的帖子！Beta Was this translation helpful? Give feedback.
All reactions