changelog.md

v2022.7.30-dev (202207300)

• e4159d5 Improve ctrl file write logic
• f440010 Use usleep for float seconds
• 305db14 Add configurable idleThreshold, and update idle mode information
• 31c96ff Update Idle mode support for Sony Xperia devices

v2022.7.29-dev (202207290)

• 30aacc2 Add new switch group for Sony Xperia devices
• 3575483 Merge pull request #161 from MrCarb0n/scrap (17fd1c4 prep for external editor app support)
• f93098e --test shall skip missing ctrl files
• 04bf46f Fix ctrl file write function
• 3b96bae Rewrite ctrl file write logic
• b7583e5 Fix & optimize capacity_sync
• d55cd89 Optimize --force
• 142d160 Miscellaneous fixes
• f740feb Fix --parse issues
• 171ec2f Use 3600mV to stop charging with voltage regulators, and don't mask status as "Idle"
• 294297c Print "Hang on..." to make "Terminated" messages less obscure
• a035559 Update documentation
• d08ad09 Update default config layout and comments
• 622dd59 [Wizard] change "exit" option from "g" to "z"
• a8378b0 Additional charging switches
• 7d5f899 Add adb push helper
• 1228f3d Undo "disable mi_thermald"
• 54a8f53 Misc charging control fixes
• bcfc477 Fix "acc -t file"
• d2711ef Fix battery info issues
• d601bce Current and voltage control fixes
• 18485bf Fix AccSettings
• 6cf01cd Fix & optimize cooldown

v2022.7.19-dev (202207190)

• Bump version
• 423fadb Misc charging control fixes and optimizations
• d74a647 Systemlessly disable mi_thermald
• deb4736 Add support for cooldown_charge=0 (to be used with cooldown_current)
• 6286223 Update documentation
• ded8b86 Rewrite script scheduler
• 950709b Update BATT_HEATH calculator
• e778686 Goodbye loopCmd (replaced by one-line scripts)
• e5110f4 Improve force_off

v2022.7.10-dev (202207100)

• 4240644 Add voltage support to -e and -d options
• 5a63ada Fix offMid
• fee795b Each ctrl file gets written to 2x
• 6c6badb Optimize force_off
• 4a26458 Bump charging status check timeout

v2022.7.4-dev (202207040)

• 24dcfd7 Update translation info
• 3b882c1 Merge pull request #156 from Babilinx/dev (French translations)
• d0b8b42 Merge pull request #160 from cutiness/dev (Turkish translations)
• 744911d Report status "Idle" as "Not charging" to "fix" AccA
• 36266da Update readme
• 873128e Implement current limiting hack (temp_level)
• 3a72767 Optimize charging control loop
• bc46b40 Optimize forceOff
• 8bada33 Half batt status poll rate
• 426e749 Check config (reset if broken/missing) before loading it
• 50e19b6 Disable seqDrop timeout
• f270ad7 Update config reference
• 21f68d1 Implement forceOff: for keeping stubborn switches off
• e2edbf7 Add new wireless charging switch
• 45cd831 Make less invasive ctrl file permission changes
• fb5cc27 Make each ctrl file read-only after writing to it
• 9f4a5c5 Improve "unplugged" detection
• 19fb9e0 Rename BATT_HEALTH -> HEALTH
• eb0014e Fix: chargingSwitch[@], parameter not set

v2022.6.28-dev (202206280)

• 18c08c4 Improve emulated idle mode feedback (info)
• 84b82de Fix typos
• e9188ae Auto-set discharge_polarity
• 8eba418 Fix acc-p.txt generation
• fda19e8 Improve battery status detection

v2022.6.25-dev (202206250)

• 6e3ad43 Optimize memory usage
• de4150c (origin/dev, origin/HEAD) Rewrite discharge polarity handling logic
• 348e707 Miscellaneous optimizations
• cf2de3b Remember auto-detected discharge polarity until accd is reinitialized
• 660132b Fix language selector
• 7a38b5e Prevent unwanted switch blacklisting
• ec3b204 Remove re-plug notice
• ad922cd Fix: daemon stop timeout not honored
• cf368d3 Exclude additional misleading uevent information
• 942c251 Show battery health % and power supply info (if interfaces are available)
• e8171ba Determine discharge polarity only when the battery is actually discharging
• a725111 Re-enable daemon stop timeout (10 seconds)
• 3a9aeaa Add Zelle donation info
• b768746 Fix switch filter
• bf13dfa Add new charging switches
• 92687bb Fix: misleading "Idle" status
• d2db8e3 acc -p: filter out additional files
• 863e5b1 Fix --parse (acc -p) crash
• 1db225b Fix voltage based idle mode inconsistencies
• 88855fd Disable verbose for -l|--log
• 61961b2 Fix typo

v2022.6.21-dev (202206210)

• 8fc9e92 Update strings
• 5b791e6 Add re-plug notice
• 6884e69 If flip=on, wait for charging to resume
• d22ac4b Update discharge_polarity description
• 637ca4a Fix read_status()
• f8a04d9 Fix AccA idle mode support detection
• 624487c Assume battery is "Discharging" if charging status is unknown/weird
• 20e20c9 Fix: charging can't be enabled, if it was disabled above pause_capacity

v2022.6.19-dev (202206190)

• b1b02c3 Battery status workaround enhancements
• 3c988ff Lower ctrl file write frequency and time
• fcc0e1e Update README & translations
• 07b620b Add offMid toggle

v2022.6.12-dev (202206120)

• 9110ed8 Always check uevent batt status before comparing current
• 5746f7e Fix acc -f
• 1076997 Fix "charging keeps stopping at min < capacity < max"
• 06fff97 Add Turkish tranlations (Türkçe (tr)) by github.com/cutiness
• e429770 Enhance current unit and polarity detection
• ddc8c50 Accelerate accd stop
• 8df12eb Export log archive to /sdcard/Download/
• 9c4cce3 Include acc-t_output-${device}.log in log archive
• 1579304 Save acc -t output to /sdcard/Download/acc-t_output-${device}.log
• a0846f9 Blacklist /sys/class/qcom-battery/vbus_disable 0 1
• 12ceb6a --parse: exclude all known switches
• fc1e98b Fix typo

v2022.6.4 (202206040)

• -n|--notif [[string] [user]]: post Android notification; may not work on all systems;
• -t|--test [p|parse]: parse potential charging switches from power supply log (as acc -p), test them all, and add the working ones to the list of known switches; implies -x;
• acc -p: exclude all known switches and additional troublesome ctrl files;
• acc -s: Enforce valid pause_capacity and resume_capacity difference;
• acc -t: show more useful information; source read-ch-curr-ctrl-files-p2.sh;
• accd: if possible, avoid idle mode when capacity > pause_capacity;
• Additional charging switches;
• Blacklisted usb/vbus_disable;
• Fixed accd /path/to/config --init;
• Fixed runCmdOnPause and loopCmd parsing issues;
• Fixed: "after a reboot, accd doesn't control charging, until the keyguard is unlocked";
• General refactor;
• Hard reset wipes config and control file blacklists (acc -sr a or acc --set --reset a);
• Improved advanced battery status detection;
• Misc fixes & optimizations;
• New config variables: batt_status_override=Idle|Discharging|'custom', batt_status_workaround=true, reboot_resume=false, reset_batt_stats_on_plug=false, schedule='HHMM command...' (refer to the config or readme files for details);
• One-line scripts;
• Parse config ampFactor from batt-interface.sh as well;
• Post exit code notification if accd stops due to an error;
• Removed obsolete source code files;
• Run dexopt-job only once per boot session (if battery is charging, and system has been up for at least 15 minutes);
• Save acc -t output to /sdcard/Download/acc-t_output.txt;
• Tuning variables for not_charging() timeout (seqCount) and voltage-based idle mode (voltOff);
• Updated documentation;
• Updates can be downloaded with busybox's wget as well (may not work on all systems). Try upgrading with acc -u.

v2022.2.22.1 (202202221)

• acc -ss and -t show more info/hints;
• Fixed acc: inaccessible or not found following acc -t execution;
• Minor additions to readme.