Replies: 4 comments 28 replies
-
|
Great) but I did it exclusively for portrait 3 with cameo 1 and the old version worked. Today I tested your code and for some reason the portrait 3 cuts with a turn of 180 degrees relative to the gerber fail... Do you have that? Trying to turn it in gerbbv does not give a result... |
Beta Was this translation helpful? Give feedback.
-
|
So your saying that my current version rotates by 180°, but the old version does not? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, but this is only on ubuntu 22.04 and with portrait 3 with cameo 1 there are no such problems... If you flip the file 180 degrees and save it to gerbbv, then when converted through a script, it turns back.. With win 10 works and converts correctly.... I assume it's about the converters |
Beta Was this translation helpful? Give feedback.
-
|
Checked on win10 does not work gives an error |
Beta Was this translation helpful? Give feedback.
-
|
Do not send directly from gui to printer in win 10. It worked in win 7 but not win 10. You need to create a network print in win 10 specify your usb printer port and select the Generic/Text Only driver to make it the default for convenience. Then you send the resulting txt file to rawprint and already send it directly to the printer. In the gui, you can register the path to rawprint and you can just send the ready-made file result.txt rawprint |
Beta Was this translation helpful? Give feedback.
-
|
1)Result.txt-2)rawrpint.exe-3) usb port (cameo1 driver Generic/Text Only) |
Beta Was this translation helpful? Give feedback.
-
|
I ask for petitions for my English)) I write through the translator) |
Beta Was this translation helpful? Give feedback.
-
|
No worries about the language, I'm glad you're helping :) I'll try your Windows instructions at the end of the week, thank you :) |
Beta Was this translation helpful? Give feedback.
-
|
Unsubscribe by result) |
Beta Was this translation helpful? Give feedback.
-
|
Figured out started cutting (cameo 1) on win 10 need to update pstoedit to version 3.78 |
Beta Was this translation helpful? Give feedback.
-
|
Gerbv is working for me on Windows, ghostscript and pstoedit as well - the issue is just sending the file to the printer with the GUI. I actually managed to use file2graphtec.py (send2cutter.py) successfully, after following the instructions in the robocut readme and installing a driver via Zadig. |
Beta Was this translation helpful? Give feedback.
-
|
Excellent) By the way, checked the new version of gerbbv gives errors when checking the file rolled back to 2.6 |
Beta Was this translation helpful? Give feedback.
-
|
You mean |
Beta Was this translation helpful? Give feedback.
-
|
Yes, this error appears and if you install the old version of gerbbv 2.6, then there is no error. The second error appears if you need to rotate gerber to cut 90/180 degrees it does not always rotate |
Beta Was this translation helpful? Give feedback.
-
|
Jeinzi You can describe the uses in more detail |
Beta Was this translation helpful? Give feedback.
-
|
I tried your version (296a59b) with my Silhouette Portrait 1 last Friday; unfortunately it did not work and the instructions you commented are indeed needed. I'll have a look at how other projects deal with this. |
Beta Was this translation helpful? Give feedback.
-
|
Jeinzi Tell me where can there be an error in the code? The problem is that no matter how many degrees I turn gerber file in gerbv (180/90/270) Portrait 3 stubbornly cuts from 90 degrees angles relative to the fiducial. Where in the code is this parameter? |
Beta Was this translation helpful? Give feedback.
-
|
Jeinzi If you look at the resulting pdf, there it flips in the desired direction but the plotter cuts with a clockwise rotation angle of 90 degrees |
Beta Was this translation helpful? Give feedback.
-
|
I don't know what exactly happens, I'm new to this codebase as well. The only thing that comes to mind is the orientation parameter in graphtec.py: In the current master version, it is set to 1. In your version, it is set to 0. This documentation on the graphtec commands says that FN0 means portrait mode and FN1 means landscape. |
Beta Was this translation helpful? Give feedback.
-
|
In this case, it turns 90 degrees or 180.... Where to find a fresh plotter command library is not clear |
Beta Was this translation helpful? Give feedback.
-
|
I changed the file a little and now it is enough to specify the path to rawprint.exe checked on win 10\64 |
Beta Was this translation helpful? Give feedback.
-
@mikhailmihalkov Let's continue the discussion here, rather than on a random commit nobody will see :)
I've uploaded your changes to a new branch, so we can discuss it in more detail :) I think I also need to have a look at the projects mentioned here and in the following comments. And I'll test if your modified program still works with my Silhouette Portrait 1.
Beta Was this translation helpful? Give feedback.
All reactions