Installation issue

[SebastiaanRobbrecht]

Hi,
when installing Ui on my raspberry Pi 3B, I went through the following steps

1. full "hardware" setup. This went smoothly
2. GTK-Ui: at the Building process, I got an error message and installation was stopped. The build folder could not be found. Is this a known problem? Is there a solution?

Kind regards,
Sebastiaan

[COM8]

Could you please provide the exact command that failed, as well as the logs for it?

[SebastiaanRobbrecht]

Hi, I will send it tommorow Op 31 jan. 2023, om 17:34 heeft Fabian Sauter ***@***.***> het volgende geschreven: Could you please provide the exact command that failed, as well as the logs for it? — Reply to this email directly, view it on GitHub<#5 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AR62KX7XJYPISOOU7RE5JE3WVE5LBANCNFSM6AAAAAAUMOMORU>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[SebastiaanRobbrecht]

Here is the error:

akerslab@raspberrypi:~ $ # Clone the repository:
git clone https://github.com/Jutta-Proto/gtk-ui.git

Switch into the newly cloned repository:

cd gtk-ui

Check out the correct branch:

git checkout bt

Build the project:

mkdir build
cd build
cmake ..
cmake --build .
fatal: destination path 'gtk-ui' already exists and is not an empty directory.
Already on 'bt'
Your branch is up to date with 'origin/bt'.
mkdir: kan map ‘build’ niet aanmaken: Bestand bestaat al
-- C++ Jutta UI Options
-- =======================================================
-- JUTTA_UI_BUILD_TESTS: ON
-- JUTTA_UI_STATIC_ANALYZE: OFF
-- JUTTA_UI_ENABLE_LINTING: OFF
-- =======================================================
-- Linting is disabled
-- Conan: checking conan executable
-- Conan: Found program /home/makerslab/.local/bin/conan
-- Conan: Version found Conan version 1.57.0
-- Conan executing: /home/makerslab/.local/bin/conan install . --remote conancenter --build missing --settings build_type=Release --settings compiler=clang --settings compiler.version=12 --settings compiler.libcxx=libstdc++11 --settings compiler.cppstd=20
Configuration:
[settings]
arch=armv7
arch_build=armv7
build_type=Release
compiler=clang
compiler.cppstd=20
compiler.libcxx=libstdc++11
compiler.version=12
os=Linux
os_build=Linux
[options]
[build_requires]
[env]

openssl/1.1.1s: WARN: Package binary is corrupted, removing: b151e1733276fe181b280bdd3bde39f5f17f93d3
conanfile.txt: Installing package
Requirements
catch2/2.13.8 from 'conancenter' - Cache
cryptopp/8.7.0 from 'conancenter' - Cache
fmt/8.1.1 from 'conancenter' - Cache
nlohmann_json/3.10.5 from 'conancenter' - Cache
spdlog/1.10.0 from 'conancenter' - Cache
Packages
catch2/2.13.8:5ab84d6acfe1f23c4fae0ab88f26e3a396351ac9 - Cache
cryptopp/8.7.0:0e600af702fd6bd923be36cfc3be560aa8258a89 - Build
fmt/8.1.1:f77c3fe37d16d37d7fc810194caa465441ae1bbe - Cache
nlohmann_json/3.10.5:5ab84d6acfe1f23c4fae0ab88f26e3a396351ac9 - Cache
spdlog/1.10.0:1e60e7c83c6c270f989a99c66f1a95b43e0685c1 - Build
Build requirements
cmake/3.20.6 from 'conancenter' - Cache
openssl/1.1.1s from 'conancenter' - Cache
Build requirements packages
cmake/3.20.6:df3070f2eab8556b318b95ef61db52ea89c7530f - Build
openssl/1.1.1s:b151e1733276fe181b280bdd3bde39f5f17f93d3 - Build

Installing (downloading, building) binaries...
catch2/2.13.8: Already installed!
fmt/8.1.1: Already installed!
nlohmann_json/3.10.5: Already installed!
openssl/1.1.1s: WARN: Build folder is dirty, removing it: /home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3
openssl/1.1.1s: Copying sources to build folder
openssl/1.1.1s: Building your package in /home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3
openssl/1.1.1s: Generator txt created conanbuildinfo.txt
openssl/1.1.1s: Calling generate()
openssl/1.1.1s: WARN: Using the new toolchains and generators without specifying a build profile (e.g: -pr:b=default) is discouraged and might cause failures and unexpected behavior
openssl/1.1.1s: WARN: Using the new toolchains and generators without specifying a build profile (e.g: -pr:b=default) is discouraged and might cause failures and unexpected behavior
openssl/1.1.1s: Aggregating env generators
openssl/1.1.1s: Calling build()
openssl/1.1.1s: Apply patch (portability): TVOS and WatchOS don't like fork()
openssl/1.1.1s: gen_info = {'CFLAGS': ['-fPIC', '-O3'], 'CXXFLAGS': ['-fPIC', '-O3'], 'DEFINES': ['NDEBUG'], 'LDFLAGS': []}
openssl/1.1.1s: using target: conan-Release-Linux-armv7-clang-12 -> linux-armv4
openssl/1.1.1s: my %targets = (
"conan-Release-Linux-armv7-clang-12" => {
inherit_from => [ "linux-armv4" ],
cflags => add("-fPIC -O3"),
cxxflags => add("-fPIC -O3"),
defines => add(["NDEBUG"]),
includes => add(),
lflags => add(""),

},

);

openssl/1.1.1s: ['"conan-Release-Linux-armv7-clang-12"', 'no-shared', '--prefix=/', '--openssldir="/etc/ssl"', 'no-unit-test', 'threads', 'PERL=perl', 'no-tests', '--release', '-fPIC', 'no-md2']
Configuring OpenSSL version 1.1.1s (0x1010113fL) for conan-Release-Linux-armv7-clang-12
Using os-specific seed configuration
Creating configdata.pm
Creating Makefile

---

---

*** OpenSSL has been successfully configured ***

---

*** If you encounter a problem while building, please open an ***
*** issue on GitHub https://github.com/openssl/openssl/issues ***
*** and include the output from the following command: ***

---

*** perl configdata.pm --dump ***

---

*** (If you are new to OpenSSL, you might want to consult the ***
*** 'Troubleshooting' section in the INSTALL file first) ***

---

---

perl "-I." -Mconfigdata "util/dofile.pl"
"-oMakefile" include/crypto/bn_conf.h.in > include/crypto/bn_conf.h
perl "-I." -Mconfigdata "util/dofile.pl"
"-oMakefile" include/crypto/dso_conf.h.in > include/crypto/dso_conf.h
perl "-I." -Mconfigdata "util/dofile.pl"
"-oMakefile" include/openssl/opensslconf.h.in > include/openssl/opensslconf.h
make depend && make all
make[1]: Entering directory '/home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3/src'
make[1]: Leaving directory '/home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3/src'
make[1]: Entering directory '/home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3/src'
gcc -I. -Iinclude -fPIC -pthread -fPIC -O3 -fPIC -O3 -fPIC -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DOPENSSLDIR=""/etc/ssl"" -DENGINESDIR=""//lib/engines-1.1"" -DNDEBUG -DNDEBUG -DNDEBUG -c -o apps/app_rand.o apps/app_rand.c
gcc -I. -Iinclude -fPIC -pthread -fPIC -O3 -fPIC -O3 -fPIC -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DOPENSSLDIR=""/etc/ssl"" -DENGINESDIR=""//lib/engines-1.1"" -DNDEBUG -DNDEBUG -DNDEBUG -c -o apps/apps.o apps/apps.c
/bin/sh: 1: gcc: not found
gcc -I. -Iinclude -fPIC -pthread -fPIC -O3 -fPIC -O3 -fPIC -DOPENSSL_USE_NODELETE -DOPENSSL_PIC -DOPENSSL_CPUID_OBJ -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DKECCAK1600_ASM -DAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPOLY1305_ASM -DOPENSSLDIR=""/etc/ssl"" -DENGINESDIR=""//lib/engines-1.1"" -DNDEBUG -DNDEBUG -DNDEBUG -c -o apps/bf_prefix.o apps/bf_prefix.c
/bin/sh: 1: make[1]: *** [Makefile:661: apps/app_rand.o] Error 127
make[1]: *** Waiting for unfinished jobs....
gcc: not found
make[1]: *** [Makefile:663: apps/apps.o] Error 127
/bin/sh: 1: gcc: not found
make[1]: *** [Makefile:665: apps/bf_prefix.o] Error 127
make[1]: Leaving directory '/home/makerslab/.conan/data/openssl/1.1.1s///build/b151e1733276fe181b280bdd3bde39f5f17f93d3/src'
make: *** [Makefile:172: all] Fout 2
openssl/1.1.1s:
openssl/1.1.1s: ERROR: Package 'b151e1733276fe181b280bdd3bde39f5f17f93d3' build failed
openssl/1.1.1s: WARN: Build folder /home/makerslab/.conan/data/openssl/1.1.1s//_/build/b151e1733276fe181b280bdd3bde39f5f17f93d3/build-release
ERROR: openssl/1.1.1s: Error in build() method, line 738
autotools.make()
ConanException: Error 2 while executing make -j4
CMake Error at build/conan.cmake:651 (message):
Conan install failed='1'
Call Stack (most recent call first):
CMakeLists.txt:86 (conan_cmake_install)

-- Configuring incomplete, errors occurred!
See also "/home/makerslab/gtk-ui/build/CMakeFiles/CMakeOutput.log".
See also "/home/makerslab/gtk-ui/build/CMakeFiles/CMakeError.log".
gmake: *** Geen doelen opgegeven en geen Makefile gevonden. Gestopt.

[COM8]

It states: gcc: not found. Did you install a C++ compiler for your system?
If no, you can use for example gcc or clang.

[SebastiaanRobbrecht]

I installed clang following the hardware configuration of Jutta. So, in my opinion, it is OK.

[COM8]

But CMake has an other opinion about it 😜.

Try installing gcc.

[SebastiaanRobbrecht]

Can't solve the issues... is it possible to share an complete img. file I'm teacher and try to help my students out with there coffee corner project. I'm not the best programmer...

[COM8]

Sure! I can send you a complete RPi image. Just let me know, how large your SD-Card is, so you don't have to shrink it :D

[SebastiaanRobbrecht]

I have a 16GB micro sd card for a raspberry pi 3B+. I would be so grateful.

[SebastiaanRobbrecht]

When would you be able to make the RPi image?

[SebastiaanRobbrecht]

Hi Fabian, Where you able to make an RPi image? My pupils would be so gratefull.

[COM8]

Oh, I totally forgot about this! Sorry. Will do it tomorrow!

[COM8]

OK, here we go! The following image contains a compiled version of the serial, as well as the Bluetooth (bt) UI.
The user credentials are: pi with raspberry as password. SSH is enabled.
To start the UI:

1. Install the image on a SD-Card. It is intended for SD-Cards with a size of 32GB, but I scaled the image down to about 6GB, so it should be usable on smaller sizes as well.
2. Boot the Raspberry PI 3, or 4. Only runs on those since it requires the 64-bit OS.
3. Use the terminal to navigate to either ~/gtk-ui-bt/build for the Bluetooth version, or ~/gtk-ui-serial/build/src for the serial (UART) version.
4. A) For connecting via serial (UART) follow these instructions: https://github.com/Jutta-Proto/hardware-pi
5. B) Bluteeoth should be enabled and ready to go.
6. Start the UI from the terminal via ./Jutta-UI.
7. Enjoy 🥳

Image download link: rpi.coffee_maker_bt_serial.zip

[SebastiaanRobbrecht]

Super! I'll try it tomorrow! thanx!!!!

[SebastiaanRobbrecht]

pi@raspberrypi-coffee:~ $ /gtk-ui-bt/build
bash: /home/pi/gtk-ui-bt/build: Is a directory
pi@raspberrypi-coffee: $ ./Jutta-UI
bash: ./Jutta-UI: No such file or directory
pi@raspberrypi-coffee:~ $