Mods by christophmuellerorg (VoronDesign#84)

RND filter, Duet Maestro mount & skirt, FYSETC 5i Panel Due Holder

Author: christophmuellerorg

legacy_printers/printer_mods/README.md

@@ -36,6 +36,9 @@ like so:
 | cadriel | [Triangle Lab Filament Sensor Mount](./cadriel/triangle_lab_filament_sensor_mount) | Triange Lab filament sensor mounts | :grey_question: | :grey_question: | :heavy_check_mark: |
 | Cerulean   | [Respooler](./Cerulean/Respooler) | Respool tangled spools or bad koils | :heavy_check_mark: | :heavy_check_mark: | :heavy_check_mark: |
 | chilicoke   | [Low Profile Exhaust Duct](./chilicoke/Low_profile_exhaust_duct_adapter) | Quick-release exhaust duct adapter that requires minumal rear spacing  | :grey_question: | :heavy_check_mark: | :heavy_check_mark: |
+| christophmuellerorg | [Duet Maestro mount for Voron 2.2](./christophmuellerorg/duet_maestro_frame_mount_skirt) |Duet Maestro mount for V2.2 | :x: | :grey_question: | :heavy_check_mark: |
+|  | [FYSETC Panel Due 5i](./christophmuellerorg/fysetc_panel_due_5_integrated_voron2.2_display_holder) |Standard LCD compatible holder for the FYSETC integrated panel due | :x: | :grey_question: | :heavy_check_mark: |
+|  | [Mains plug panel for the RND_165-00057](./christophmuellerorg/mains_plug_panel_for_RND_165-00057) | Mains plug panel for the RND_165-00057 Filter/Switch combination| :x: | :grey_question: | :heavy_check_mark: |
 |Danowar |[Dual Mobius Mount](./Danowar/Dual_Mobuis_Mount) | Mounts two Mobius Extruders to the back of the printer| :heavy_check_mark:| :heavy_check_mark:|:heavy_check_mark: |
 | |[F6 Board Mount](./Danowar/F6_Board_Mount) | Mounts for FYSETCS F6 controller boards|:heavy_check_mark: | :heavy_check_mark:| :heavy_check_mark:|
 | |[Humidity Sensor Bracket](./Danowar/Humidity_Sensor_Bracket) |Mount for Humidity/Temperature sensor |:heavy_check_mark: |:heavy_check_mark: | :heavy_check_mark:|

legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/README.md

@@ -0,0 +1,4 @@
+
+![Board mount for the duet maestro](duet_maestro_holder.PNG "Board mount for the duet maestro")
+
+Side skirt component with openings for ethernet, micro SD card and USB plug of as well as a board frame mount for the Duet Maestro board.

legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/duet_maestro_board_mounting_frame.stl

@@ -0,0 +1,4 @@
+
+![FYSETC Panel Due Voron 2.2 mount](FYSETC_VORON_2.2_Display.jpg "FYSETC Panel Due Voron 2.2 mount")
+
+[5 Inch FYSETC Panel Due](http://s.aliexpress.com/EfQJzQZN) Voron 2.2 mount - compatible to the standard LCD holder.

legacy_printers/printer_mods/christophmuellerorg/duet_maestro_frame_mount_skirt/duet_maestro_holder.PNG

@@ -0,0 +1 @@
+This is a modified plug panel designed to be used with the RND 165-00057 mains filter with integrated switch sold by [Reichelt](https://www.reichelt.de/entstoerfilter-6-a-c14-snap-in-rnd-165-00057-p253031.html?&trstct=pos_0&nbc=1), [Distrelec](https://www.distrelec.ch/de/geraetestecker-mit-filter-6a-250vac-rnd-components-rnd-165-00057/p/30101820) or [ELFA](https://www.elfa.se/en/power-inlet-with-filter-6a-250vac-rnd-components-rnd-165-00057/p/30101820?track=true&no-cache=true)