V0 Electronics Deck with inserts and logo by Kruppes (VoronDesign#80)

Author: Kruppes

printer_mods/Kruppes/Deck_Panel_inserts_logo/Deck_Panel_no_Logo.step

@@ -0,0 +1,19 @@
+# README
+
+### Overview
+
+Remix of the crew mods deck panel that uses brass heat inserts instead of nylon stand-offs to not have screw heads showing when looking at the printer. Allows inserts 5 mm x 6 mm (shorter 4 mm ones recommended for PSU).
+
+### Requirements:
+Designed for spec hardware:
+- PSU: Meanwell LRS-100-24
+- MCU: BTT SKR Mini E3 1.2
+
+### How to print Accent colored Logo
+The "Deck_Panel_with_Logo.zip.amf" contains two STLs, one being the Voron logo 0.4 height and 60° sides (2 layers), the other being the deck panel without the Logo. You can print the logo first in your accent color, change filament and print the main color over it <b>without touching the bed</b> in between. Deactivate fans for overhands and put overhang flor to 100% to get a proper adhesion between the two prints. Also put z-Hop to 0.2 mm (perfect world) or 0.4 mm (safe side) for the main color print. no not crash the nozzle into the accent color.
+
+<img id="Bottom" width="100%" alt="Bottom view" src="pictures/deck.png">
+
+<img id="Populated" width="100%" alt="Populated" src="pictures/populated.png">
+
+<img id="Accent_Logo" width="100%" alt="Logo in Accent color" src="pictures/logo.png">

printer_mods/Kruppes/Deck_Panel_inserts_logo/Deck_Panel_no_Logo.stl

@@ -95,6 +95,7 @@ If your mod is lacking a column in the compatibility matrix, feel free to submit
 |Koios |[Front Panel Locks](./Koios/6mm_Glass) |Front panel locks for 6mm tempered glass panels | :x: | :heavy_check_mark: | :grey_question:|
 | |[Logitech C920 Mount](./Koios) |Mount for C920 secured to the top front extrusion |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
 | |[LED Mounts](./Koios) |Different mounts for LED light bars |:grey_question: |:heavy_check_mark: | :heavy_check_mark:|
+|Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:x: |:x: |:x: |
 |manfre |[Openbuild chain ends](./manfre/cable_chains) |Cable chain ends to use off the shelf chains with Voron parts |:x: |:heavy_check_mark: |:heavy_check_mark: |
 |masgar |[Direct Drive for 1.6.2](./masgar/V1.6.2_direct_drive) | Remix of 1.6.2 toolhead and Afterburner | :heavy_check_mark: | :x: | :x: |
 | |[VoltAmpMeter panel insert](./masgar/VoltAmpMeter_Panel_Insert)   | Mounting panel for VoltAmpMeter | :heavy_check_mark: |:x: |:x: |