10x11 cable chain endcaps by mjoaris (VoronDesign#104)

Author: mjoaris

printer_mods/README.md

@@ -30,7 +30,8 @@ like so:
 |Dan88 |[V0 one-part Skirts](./Dan88/V0skirt) |One part Skirts for the V0 |:heavy_check_mark: |:x: |:x: |
 | FreeformFez | [V1.8 Filtered Power Inlet](./FreeformFez/FilteredPower) | V1.6 Filtered Inlet and Rocker Switch for V1.8 | :x: | :heavy_check_mark: | :x: |
 |Kruppes |[V0 Printed Deck with inserts](./Kruppes/Deck_Panel_inserts_logo) |Electronics Deck Panel using brass heat inserts. Optional with accent color Voron Logo. |:heavy_check_mark: |:x: |:x: |
-|mjoaris |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |
+|mjoaris |[10x11 Cable Chain Endcaps](./mjoaris/10x11_Cable_Chain_Endcaps) |Printable Endcaps for 10x11 Cable Chains |:x: |:heavy_check_mark: |:heavy_check_mark: |
+| |[Mini12864 LCD Mount](./mjoaris/Mini12864_LCD_Mount_for_V2.4) |Swiveling case for the Fysetc Mini12864 LCD |:x: |:grey_question: |:heavy_check_mark: |
 |StvPtrsn |[Skirts for a 320mm Build](./StvPtrsn/320mm_Build) |Skirts for a 320mm build |:x: |:x: |:heavy_check_mark: |
 | |[Keystone Jack for Filtered Mains Panel](./StvPtrsn/Keystone_Jack_Filtered_Mains_Panel) |Add a keystone jack to your filtered mains plug panel |:x: |:x: |:heavy_check_mark: |
 | |[Side Fan Support, No Tape](./StvPtrsn/Side_Fan_Support_No_Tape) |Mount the 60mm side fans and inserts without tape |:x: |:x: |:heavy_check_mark: |

printer_mods/mjoaris/10x11_Cable_Chain_Endcaps/10x11-chain-endcap1_nosupport.STL

@@ -0,0 +1,18 @@
+# Printable Endcaps for 10x11 Cable Chains
+![Printed Parts](Images/printed.jpg)
+![With Supports](Images/endcaps_support.PNG)
+![No Supports](Images/endcaps_nosupport.PNG)
+
+## Overview
+These are printable endcaps, based on this [Thingiverse model](https://www.thingiverse.com/thing:3993841). I changed the 3 hole design to a 2 hole version such that you can firmly mount it on the 2020 extrusion. The endcaps ensure that you do not have to purchase two 10x11 cable chains or seperate endcap pieces. You can print these in black such that it matches the chain or in your accent color for fancier looks. 
+
+## BOM
+* 1x [10x11 Cable chain](https://www.aliexpress.com/item/33000014666.html)
+* 4x M3x6 or M3x8 BHCS.
+* 4x M3 T-nut HNTAJ5-3.
+
+## Printing instructions
+Personally, I printed the version with build-in supports and only had some minor cleanup to do. I have also included a version without supports for you to try. The parts are designed around 0.4mm line width and 0.2mm layer height.
+
+## Questions
+Hit me up in Voron's [Discord](https://discord.gg/xgXWctB) if you have any questions.