For the newest commit of fenix these steps works for me to have /dev/spidev1.0 based on https://forum.khadas.com/t/vim3-ubuntu-spi/9372/2?u=chiahungmou and suggestions above.
1.Modify /fenix/linux/arch/arm64/boot/dts/amlogic/kvim3_linux.dts b/arch/arm64/boot/dts/amlogic/kvim3_linux.dts as below:
&pwm_ef {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pwm_f_pins1>;
};
...
&spicc1 {
status = "enable";
pinctrl-names = "default";
pinctrl-0 = <&spicc1_pins>;
cs-gpios = <&gpio GPIOH_6 0>;
...
-
Run
make kernel && make debs && make -
Replace
/boot/zImageand/boot/dtb/kvim3_linux.dtbwithImageandkvim3_linux.dtbwhich are built at step 2.$scp ./fenix/linux/arch/arm64/boot/Image [email protected]:/tmp $scp ./fenix/linux/arch/arm64/boot/dts/amlogic/kvim3_linux.dtb [email protected]:/tmp $ssh [email protected] $sudo mv /tmp/Image /boot/zImage $sudo mv /tmp/kvim3_linux.dtb /boot/dtb -
Update device tree overlay.
vim /boot/env.txtto change this line: overlays=uart3 i2c3 os08a10 spi1
5.WiringPi check gpio.
` khadas@Khadas:~$ gpio readall
+------+-----+----------+------+---+----+---- Model Khadas VIM3 --+----+---+------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | DS | PU/PD | Physical | PU/PD | DS | V | Mode | Name | wPi | GPIO |
+------+-----+----------+------+---+----+-------+----++----+-------+----+---+------+----------+-----+------+
| | | 5V | | | | | 1 || 21 | | | | | GND | | |
| | | 5V | | | | | 2 || 22 | P/U | | 1 | ALT1 | PIN.A15 | 6 | 475 |
| | | USB_DM | | | | | 3 || 23 | P/U | | 1 | ALT1 | PIN.A14 | 7 | 474 |
| | | USB_DP | | | | | 4 || 24 | | | | | GND | | |
| | | GND | | | | | 5 || 25 | P/U | | 1 | ALT0 | PIN.AO2 | 8 | 498 |
| | | MCU3V3 | | | | | 6 || 26 | P/U | | 1 | ALT0 | PIN.AO3 | 9 | 499 |
| | | MCUNRST | | | | | 7 || 27 | | | | | 3V3 | | |
| | | MCUSWIM | | | | | 8 || 28 | | | | | GND | | |
| | | GND | | | | | 9 || 29 | P/D | | 0 | ALT0 | PIN.A1 | 10 | 461 |
| | 18 | ADC0 | | | | | 10 || 30 | P/D | | 1 | ALT0 | PIN.A0 | 11 | 460 |
| | | 1V8 | | | | | 11 || 31 | P/D | | 0 | ALT0 | PIN.A3 | 12 | 463 |
| | 19 | ADC1 | | | | | 12 || 32 | P/D | | 0 | ALT0 | PIN.A2 | 13 | 462 |
| 506 | 1 | PIN.AO10 | ALT3 | 0 | | P/U | 13 || 33 | P/D | | 0 | ALT1 | PIN.A4 | 14 | 464 |
| | | GND3 | | | | | 14 || 34 | | | | | GND | | |
| 433 | 2 | PIN.H6 | OUT | 1 | | P/D | 15 || 35 | P/D | | 0 | ALT2 | PWM-F | 15 | 432 |
| 434 | 3 | PIN.H7 | ALT2 | 0 | | P/D | 16 || 36 | | | | | RTC | | |
| | | GND | | | | | 17 || 37 | P/D | | 0 | ALT2 | PIN.H4 | 16 | 431 |
| 497 | 4 | PIN.AO1 | ALT0 | 1 | | P/U | 18 || 38 | | | | | MCU-FA1 | | |
| 496 | 5 | PIN.AO0 | ALT0 | 1 | | P/U | 19 || 39 | P/D | | 0 | IN | PIN.Z15 | 17 | 426 |
| | | 3V3 | | | | | 20 || 40 | | | | | GND | | |
+------+-----+----------+------+---+----+-------+----++----+-------+----+---+------+----------+-----+------+
`
-
Check pins related to SPI.
VIM3 SPI: PIN37: GPIOH_4/SPIB_MOSI -> type ALT2 PIN35: PWM_F/SPIB_MISO -> type ALT2 PIN15: UARTC_RX/SPIB_SS -> type OUT PIN16: UARTC_TX/SPIB_SCLK -> type ALT2 -
Build tester and run.
cd /WiringPi_khadas/examples make spi_test_vim3 ./spi_test_vim3
MAX6675 reading temperature
This is an unofficial mirror of WiringPi to support ports (Python/Ruby/etc).
Please do not email Gordon if you have issues, he will not be able to help.
Pull-requests are not currently accepted, since this is a mirror.
For support, comments, questions, etc please join the WiringPi Discord channel: https://discord.gg/SM4WUVG
Please note that the official way to get wiringPi is via git from git.drogon.net and not GitHub.
ie.
git clone git://git.drogon.net/wiringPi
The version of wiringPi held on GitHub by "Gadgetoid" is used to build the wiringPython, Ruby, Perl, etc. wrappers for these other languages. This version may lag the official Drogon release. Pull requests may not be accepted to Github....
Please see
for the official documentation, etc. and the best way to submit bug reports, etc. is by sending an email to [email protected]
Thanks!
-Gordon