From f0dfa87b358973321fabb9fb82679ce51be730e8 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?S=C3=B6ren=20Thomsen?=
 <32633545+soerenthomsen@users.noreply.github.com>
Date: Mon, 11 Oct 2021 09:39:26 +0200
Subject: [PATCH] reformulation

---
 sections/oxygen_pre_deployment.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sections/oxygen_pre_deployment.md b/sections/oxygen_pre_deployment.md
index 7e17d896..7b3e05b0 100644
--- a/sections/oxygen_pre_deployment.md
+++ b/sections/oxygen_pre_deployment.md
@@ -17,7 +17,7 @@ The sensor then needs to be placed in water to hydrate at least 24 h prior to st
 Keeping sensor in small beakers before and during calibration process. Only the membrane will need to be submerged in distilled water.
 :::
 
-After recovery the sensor and to remove any biofouling, the following protocol is recommended by the manufacturer: 
+After recovery the sensor has to be cleaned to remove any biofouling. The following protocol is recommended by the manufacturer: 
 1. If the sensor has been for too long exposed to the air, leave it overnight in a vinegar solution.
 2. Next day, place the sensor in soapy water and use a brush gently if it is necessary to remove all material adhered to the surface.
 3. Rinse very well with clean water and dry carefully.