TC DDOP in CNH terminal PRO 1200

[vbenso]

Hi everyone,
First of all, thanks for the great work.

I've been working with ISOBUS using ESP32 for almost 2 years. Developed the whole stack from scratch and looking at your work, I think it is great.
Perhaps this isn't the best place to put this question, but I'll rather be sorry posting it instead of asking for permission.

I'm using a DDOP that describes a planter. It works well with green star screens (GS2 GS3 GS4), AGCO's C3000, and Intelliview IV/Pro700.
Today I've encountered a problem when comunicating with the CNH's Pro1200 screen.

The Object-pool Transfer Response message, gives me error code 2 ( "Any other error"), not that helpful.
0x71 0x02 0xE0 0x05 0x00 0x00 0xFF 0xFF

This the TC server information from it's status message:

TC_STATE_MACHINE: Registering working set
TC_STATE_MACHINE: REQUESTING TC VERSION
TC_STATE_MACHINE: GOT a TC VERSION: 4
TC_STATE_MACHINE: TC VERSION: 04
TC_STATE_MACHINE: TC BOOT_TIME: 255
TC_STATE_MACHINE: TC OPTIONS_1: 0x17
TC_STATE_MACHINE: TC OPTIONS_2: 0x00
TC_STATE_MACHINE: TC BOOMS FOR SECTION CONTROL: 06
TC_STATE_MACHINE: TC NUMBER OF SECTIONS FOR SECTION CONTROL: 16
TC_STATE_MACHINE: TC NUMBER OF CHANNELS FOR POSITION BASED CONTROL: 06

And this is the XML of my DDOP:

<?xml version="1.0" encoding="UTF-8"?>
<ISO11783_TaskData VersionMajor="3" VersionMinor="0" DataTransferOrigin="1">
    <DVC A="DVC-1" B="PLANT. FORTRON V04S04-R48PS" C="Version 0.5.4" D="A00884008C812348" E="74568"
        F="30303133373036" G="FFFFFFFFFF0001">
        <DET A="DET-1" B="14" C="1" D="Implemento" E="0" F="0">
            <DOR A="15" />
            <DOR A="16" />
            <DOR A="17" />
            <DOR A="18" />
            <DOR A="19" />
            <DOR A="20" />
        </DET>
        <DET A="DET-2" B="40" C="4" D="Planter Section 1" E="1" F="27">
            <DOR A="41" />
            <DOR A="42" />
            <DOR A="43" />
            <DOR A="44" />
            <DOR A="45" />
            <DOR A="46" />
        </DET>
        <DET A="DET-3" B="47" C="4" D="Planter Section 2" E="2" F="27">
            <DOR A="48" />
            <DOR A="49" />
            <DOR A="50" />
            <DOR A="51" />
            <DOR A="52" />
            <DOR A="53" />
        </DET>
        <DET A="DET-4" B="54" C="4" D="Planter Section 3" E="3" F="27">
            <DOR A="55" />
            <DOR A="56" />
            <DOR A="57" />
            <DOR A="58" />
            <DOR A="59" />
            <DOR A="60" />
        </DET>
        <DET A="DET-5" B="61" C="4" D="Planter Section 4" E="4" F="27">
            <DOR A="62" />
            <DOR A="63" />
            <DOR A="64" />
            <DOR A="65" />
            <DOR A="66" />
            <DOR A="67" />
        </DET>
        <DET A="DET-6" B="21" C="6" D="Engate" E="200" F="14">
            <DOR A="22" />
            <DOR A="23" />
            <DOR A="24" />
            <DOR A="25" />
            <DOR A="26" />
        </DET>
        <DET A="DET-7" B="27" C="2" D="Planter" E="201" F="14">
            <DOR A="28" />
            <DOR A="29" />
            <DOR A="30" />
            <DOR A="31" />
            <DOR A="32" />
            <DOR A="33" />
            <DOR A="34" />
            <DOR A="35" />
            <DOR A="36" />
            <DOR A="37" />
            <DOR A="38" />
            <DOR A="39" />
        </DET>
        <DVP A="1" B="0" C="1.000000" D="3" E="l" />
        <DVP A="2" B="0" C="1.000000" D="3" E="kg" />
        <DVP A="3" B="0" C="1.000000" D="3" E="m" />
        <DVP A="4" B="0" C="1.000000" D="0" E="mm" />
        <DVP A="5" B="0" C="1.000000" D="0" E=" " />
        <DVP A="6" B="0" C="1.000000" D="0" E="m²" />
        <DVP A="7" B="0" C="1.000000" D="0" E="s" />
        <DVP A="8" B="0" C="1.000000" D="0" E=" " />
        <DVP A="9" B="0" C="1.000000" D="0" E="Linhas" />
        <DVP A="10" B="0" C="1.000000" D="0" E="Secoes" />
        <DVP A="11" B="0" C="1.000000" D="0" E="Sementes" />
        <DVP A="12" B="0" C="1.000000" D="0" E="L/ha" />
        <DVP A="13" B="0" C="1.000000" D="0" E="kg/ha" />
        <DPD A="15" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="16" B="0078" C="2" D="16" E="Tempo Ligado" F="7" />
        <DPD A="17" B="0074" C="2" D="16" E="Área Total" F="6" />
        <DPD A="18" B="0043" C="1" D="8" E="Largura Útil" F="4" />
        <DPD A="19" B="008D" C="1" D="8" E="Estado Impl." F="8" />
        <DPD A="20" B="DFFF" C="0" D="31" E="Default DDI Object" F="7" />
        <DPD A="22" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="23" B="0087" C="2" D="8" E="Y" F="4" />
        <DPD A="24" B="0088" C="2" D="8" E="Z" F="4" />
        <DPD A="25" B="009D" C="0" D="8" E="Engate" F="5" />
        <DPD A="26" B="0043" C="0" D="8" E="Largura Útil" F="4" />
        <DPD A="28" B="0086" C="1" D="8" E="X" F="4" />
        <DPD A="29" B="000C" C="1" D="8" E="Pop. Atual" F="11" />
        <DPD A="30" B="000B" C="2" D="8" E="Pop. Alvo" F="11" />
        <DPD A="31" B="0052" C="3" D="16" E="Pop Total" F="11" />
        <DPD A="32" B="00A0" C="3" D="8" E="SECT. CONTROL" F="8" />
        <DPD A="33" B="00A1" C="1" D="8" E="SECT. CONTROL Cond. State" F="8" />
        <DPD A="34" B="0122" C="3" D="8" E="SECT. CONTROL Target. State" F="8" />
        <DPD A="35" B="0078" C="2" D="16" E="Tempo Ligado" F="7" />
        <DPD A="36" B="0074" C="2" D="16" E="Área Total" F="6" />
        <DPD A="37" B="0043" C="1" D="8" E="Largura Útil" F="4" />
        <DPD A="38" B="008D" C="1" D="8" E="Estado Impl." F="8" />
        <DPT A="39" B="00B3" C="2" D="Atividade" E="7" />
        <DPD A="41" B="000C" C="1" D="8" E="Pop. Atual" F="11" />
        <DPD A="42" B="0043" C="1" D="8" E="Largura" F="4" />
        <DPD A="43" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="44" B="0087" C="2" D="8" E="Y" F="4" />
        <DPD A="45" B="0088" C="2" D="8" E="Z" F="4" />
        <DPD A="46" B="009F" C="0" D="8" E="Sub Units" F="9" />
        <DPD A="48" B="000C" C="1" D="8" E="Pop. Atual" F="11" />
        <DPD A="49" B="0043" C="1" D="8" E="Largura" F="4" />
        <DPD A="50" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="51" B="0087" C="2" D="8" E="Y" F="4" />
        <DPD A="52" B="0088" C="2" D="8" E="Z" F="4" />
        <DPD A="53" B="009F" C="0" D="8" E="Sub Units" F="9" />
        <DPD A="55" B="000C" C="1" D="8" E="Pop. Atual" F="11" />
        <DPD A="56" B="0043" C="1" D="8" E="Largura" F="4" />
        <DPD A="57" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="58" B="0087" C="2" D="8" E="Y" F="4" />
        <DPD A="59" B="0088" C="2" D="8" E="Z" F="4" />
        <DPD A="60" B="009F" C="0" D="8" E="Sub Units" F="9" />
        <DPD A="62" B="000C" C="1" D="8" E="Pop. Atual" F="11" />
        <DPD A="63" B="0043" C="1" D="8" E="Largura" F="4" />
        <DPD A="64" B="0086" C="2" D="8" E="X" F="4" />
        <DPD A="65" B="0087" C="2" D="8" E="Y" F="4" />
        <DPD A="66" B="0088" C="2" D="8" E="Z" F="4" />
        <DPD A="67" B="009F" C="0" D="8" E="Sub Units" F="9" />
    </DVC>
</ISO11783_TaskData>

Given that this same DDOP works with many screens, from different manufacturers, I'm really puzzled about this Pro1200 response.
Do you spot anything wrong with this OP?
Thanks in advance for any hints.

[ad3154]

Do you have the binary version of the DDOP you could also share? It would be easier to check in that format with our stack if you don't mind.

Also, converting issue to discussion

[vbenso]

Hi,
I've configured the implement in 3 different ways, all 3 didn't work in the PRO1200.
1 - Planter only (4 sections of 12 rows each) - V04S04-R48P
2 - Planter + Furrow Sprayer (2 functions with of 4 sections of 12 rows/nozzles each) - V04S04-R48PS
3 - Furrow Sprayer only (4 sections of 12 nozzles each) - V04S04-N48S

For the binary version, I've created C arrays for each case.
ddop_pro_1200.zip

Thinking over this subject, what are the chances that the accents in some DPDs can be the source of the problem?

[vbenso]

Thinking over this subject, what are the chances that the accents in some DPDs can be the source of the problem?

That was indeed the problem.
All the 3 cases worked like a charm after removing the accents from the DDP's descriptions.

Problem solved.

[ad3154]

That's certainly interesting... with TC version 4 you're allowed to use UTF-8 characters in the descriptors so maybe there is an issue on the CNH side? Or were you uploading as a version 3 client? Maybe slightly more to the mystery there but I am glad it's working!