minor fixes

Author: ammedd

docs/tutorials/Research_Proposal_only.ipynb

@@ -101,6 +101,7 @@
     "A Conductivity, Temperature, and Depth (CTD) sensor is an instrument used to measure the physical properties of seawater in oceanographic and environmental research. It typically consists of sensors for conductivity (used to derive salinity), temperature, and pressure (used to derive depth).\n",
     "\n",
     "Throughout a CTD deployment, the research vessels needs to stay in the same location. To calculate the time needed for a CTD deployment, take the following information into account:\n",
+    "\n",
     "* Add time to lower the vessels speed to zero and set the vessel to the appropriate direction against swell, current, wind, etc = 10 minutes \n",
     "* Add time to deploy the CTD, and to recover = 10 minutes (2*5 min) \n",
     "* Add time for the way down and up, usually at 1 m/s (winch capacity) = twice your maximum depth (in seconds)\n",
@@ -240,6 +241,7 @@
     "   \n",
     "Please tick both on-board and external equipment needed during the cruise. Note that you can only use one of the ADCPs at any time.   \n",
     "<small><i>To check a box, replace [  ] with [x].</i></small>\n",
+    "\n",
     "- [ ] Underway Data\n",
     "      \n",
     "- [ ] ADCP (OceanObserver max depth 1000m with data every 24 meters) \n",
@@ -263,7 +265,7 @@
    "source": [
     "### Cruise Data\n",
     "\n",
-    "A map and cruise plan can be created through [https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#](https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#)\n",
+    "A map and cruise plan can be created through <a href=\"https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#\" style=\"color:lightblue;\">https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#</a>\n",
     "\n",
     "Documentation on how to use the website can be found <a href=\"https://surfdrive.surf.nl/files/index.php/s/gSNMZqyrf0Pyfo5\" style=\"color:red;\">here</a> and you can watch the video below.\n",
     "<iframe width=\"560\" height=\"315\" src=\"https://www.youtube.com/embed/yIpYX2xCvsM?si=sEXq0Zn5z94JJ3yE\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen></iframe>"
@@ -313,7 +315,7 @@
    "source": [
     "11. **Scientific work program**\n",
     "\n",
-    "Please provide a scheme with number of necessary work and in-transit days within the working areas and station times. This can be downloaded from [https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#](https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#) using the Export button on the right.\n",
+    "Please provide a scheme with number of necessary work and in-transit days within the working areas and station times. This can be downloaded from <a href=\"https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#\" style=\"color:lightblue;\">https://nioz.marinefacilitiesplanning.com/cruiselocationplanning#</a> using the Export button on the right.\n",
     "\n",
     "Please indicate at each station what instruments you want to deploy (CTD, Argo float, drifter, XBT) and take the deployment time into account. If you plan to use Argo floats, please give the required depth and cycle duration. In case of the CTD the deployment time depends on the depth of the ocean. \n",
     "\n",
@@ -373,7 +375,7 @@
     "\n",
     "# Query and print the bathymetry data at the specified location\n",
     "station_depth = data.deptho.sel(latitude=-50, longitude=150, method=\"nearest\")\n",
-    "print(station_depth.values)"
+    "print(f\"The depth at this station is: {station_depth.values}\")"
    ]
   },
   {