-
Notifications
You must be signed in to change notification settings - Fork 30
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Turtlebot3: Open Manipulator Bringup Fails: DynamixelSDKWrapper: No status packet! Proces died: stack smashing detected. #58
Comments
We are using a Waffle Pi. |
Exactly same issue (ubuntu 20, ros2 foxy, waffle pi with manipulator ): ubuntu@wafflepi:~$ ros2 launch turtlebot3_manipulation_bringup hardware.launch.py |
Sorry for the late response. Please refer to this issue to help resolve your problem #71 |
Turtlebot3: Open Manipulator: bringup fails: ERROR from Dynamixels SDKWrapper : No status packet found + proces dies: stack smashing detected.
Hello, me and my student group from UPV Valencia are following the ROBOTIS E-Manuel for the Turtlebot3: Open Manipualtor. We are following the steps issued for Foxy because Humble is not available.
https://emanual.robotis.com/docs/en/platform/turtlebot3/manipulation/#turtlebot3-with-openmanipulator
We are currently stuck at step 7.5 (Bringup).
We took these premature steps:
SOFTWARE SETUP: (humble instead of foxy installed)
$ sudo apt install ros-humble-dynamixel-sdk ros-humble-ros2-control ros-humble-ros2-controllers ros-humble-gripper-controllers ros-humble-moveit
$ cd ~/turtlebot3_ws/src/
$ git clone -b humble-devel https://github.com/ROBOTIS-GIT/turtlebot3_manipulation.git
$ cd ~/turtlebot3_ws && colcon build --symlink-install
OPEN CR FIRMWARE SETUP
$ export OPENCR_PORT=/dev/ttyACM0
$ export OPENCR_MODEL=turtlebot3_manipulation
$ rm -rf ./opencr_update.tar.bz2
$ wget https://github.com/ROBOTIS-GIT/OpenCR-Binaries/raw/master/turtlebot3/ROS2/latest/opencr_update.tar.bz2
$ tar -xvf opencr_update.tar.bz2
$ cd ./opencr_update
$ ./update.sh $OPENCR_PORT $OPENCR_MODEL.opencr
Then when we try to launch the hardware bringup:
$ ros2 launch turtlebot3_manipulation_bringup hardware.launch.py
We get multiple errors stating:
[ros2-control-node-1] [ERROR] [DynamixelSDKWrapper] [TxRxResult] There is no status packet!
Later the proces dies stating:
stack smashing detected
I will upload screenshots taken stating the full output code:
We as a group think it has to do with an incompatible firmware version on our OPEN CR board. Can anyone please help us resolve this issue or give an indication what the problem might be? Thanks!
The text was updated successfully, but these errors were encountered: