Skip to content

Emscripten SDK

Jump to bottom Edit New page
Alon Zakai edited this page Apr 16, 2014 · 30 revisions

The whole Emscripten toolchain is distributed as a standalone Emscripten SDK. The SDK provides all the required tools, such as Clang, Python, Node.js and Visual Studio integration along with an update mechanism that enables migrating to newer Emscripten versions as they are released.

You can also set up Emscripten from source, without the pre-built SDK, see "Installing from Source" below.

Downloads

To get started with Emscripten development, grab one of the packages below:

Windows:

Mac OS X:

Linux:

  • See the instructions section below.

Emscripten Clang Backend Prerelease

As a prerelease version, you can also download the emsdk-1.13.0 package, which is the first release to migrate Emscripten to a new Clang backend. Note that this version might still be a bit rough on the edges.

Windows:

Mac OS X:

  • Download the emsdk-portable.tar.gz above, unzip it, and execute ./emsdk update followed by ./emsdk install sdk-1.13.0-64bit to get the new backend version.

Installation Instructions

Check one of the topics below for what to do with the package you just downloaded.

Windows: Installing using a NSIS Installer

The NSIS installers register the Emscripten SDK as a 'standard' Windows application. To install the SDK, download a NSIS .exe file above, double-click on it, and run through the installer to perform the installation. After the installer finishes, the full Emscripten toolchain will be available in the directory that was chosen during the installation, and no other steps are necessary. If your system has Visual Studio 2010 installed, the vs-tool MSBuild plugin will be automatically installed as well.

Windows and OSX: Installing the Portable SDK

The Portable Emscripten SDK is a no-installer version of the SDK package. It is identical to the NSIS installer, except that it does not interact with the Windows registry, which allows Emscripten to be used on a computer without administrative privileges, and gives the ability to migrate the installation from one location (directory or computer) to another by just copying/zipping up the directory contents.

If you want to use the Portable Emscripten SDK, the initial setup process is as follows:

  1. Download and unzip the portable SDK package to a directory of your choice. This directory will contain the Emscripten SDK.
  2. Open a command prompt to the directory of the SDK.
  3. Run emsdk update. This will fetch the latest registry of available tools.
  4. Run emsdk install latest. This will download and install the latest SDK tools.
  5. Run emsdk activate latest. This will set up ~/.emscripten to point to the SDK.

Whenever you change the location of the Portable SDK (e.g. take it to another computer), re-run step 5.

Note: On OSX, type ./emsdk instead of emsdk above.

Windows and OSX: Build the Emscripten toolchain manually

If you do not want to use the SDK, there exists guides for setting up Emscripten and its prerequisites manually, see

Linux

The SDK is not available for Linux at the moment. To get started on Linux, see installing from source in the next section. The following links may also be useful (but might be out of date):

Installing from Source

Instead of using the SDK, you can grab the code and dependencies yourself. This is the preferred path on Linux, where the Emscripten SDK is currently not available.

Get the following:

  • The Emscripten code, from github (git clone git://github.com/kripken/emscripten.git. The master branch is fine, it is guaranteed to always be stable. We merge to master only after all tests pass.)
  • Emscripten's LLVM and Clang. Emscripten now has an LLVM backend ("fastcomp"), which means you need to use our LLVM+Clang. See "Getting Fastcomp" in the LLVM Backend page. (See also notes on that link about how to disable fastcomp and use a stock version of LLVM, if you want, although that is not recommended.)
  • Node.js (0.8 or above; 0.10.17 or above to run websocket-using servers in node)
  • Python 2.7.3
  • Optionally, if you want to use Closure Compiler to minify your code as much as possible, you will also need Java.

Operating system notes:

  • If you are on OS X, homebrew should be able to get you LLVM and Clang. They will probably show up in /usr/bin or /usr/local/bin.
  • A complete OS X guide for getting Emscripten and all the dependencies the test suite needs is at https://gist.github.com/1974955 (note that you don't need everything there just to run this tutorial)

Additional Notes:

  • Python is probably already installed if you are on Linux or OS X.
  • Node.js and LLVM should have convenient binaries for your OS, but installing them from source is easy, just compile them in their directories, you don't need to bother with installing them systemwide (you will point Emscripten to them in the next step, where you set up directories).

Getting Started with Emscripten

The tools in the Emscripten toolchain can be accessed in various ways. Which one you use depends on your preference.

Command line usage

The Emscripten compiler is available on the command line by invoking emcc or em++. They are located in the folder emsdk/emscripten/<version>/ in the SDK. You can add this directory to PATH to get an easy access to the toolchain.

Check out the tutorial! See the Emscripten Tutorial page for help on how to get going with the tools from command line.

Windows: Emscripten Command Prompt

Start the Emscripten Command Prompt from Start Menu -> All Programs -> Emscripten -> Emscripten Command Prompt. This will spawn a new command prompt that has all the tools for the currently activated SDK version set to PATH. The Emscripten Command Prompt is analogous to the Visual Studio Command Prompt that ships with installations of Visual Studio.

Windows: Use Visual Studio 2010

After installing the vs-tool plugin, a new 'Emscripten' configuration will appear to the list of all Solution Configurations in Visual Studio. Activating that configuration for a solution/project will make Visual Studio run the project build through Emscripten, producing .html or .js output, depending on the project properties you set up.

SDK Concepts

The Emscripten SDK is effectively a small package manager for tools that are used in conjunction with Emscripten. The following glossary highlights the important concepts to help understanding the internals of the SDK:

  • Tool: The basic unit of software bundled in the SDK. A Tool has a name and a version. For example, 'clang-3.2-32bit' is a Tool that contains the 32-bit version of the Clang v3.2 compiler.
  • SDK: A set of tools. For example, 'sdk-1.5.6-32bit' is an SDK consisting of the tools clang-3.2-32bit, node-0.10.17-32bit, python-2.7.5.1-32bit and emscripten-1.5.6.
  • Active Tool/SDK: Emscripten stores compiler configuration in a user-specific file ~/.emscripten. This file points to paths for Emscripten, Python, Clang and so on. If the file ~/.emscripten is configured to point to a Tool in a specific directory, then that tool is denoted as being active. The Emscripten Command Prompt always gives access to the currently active Tools. This mechanism allows switching between different SDK versions easily.
  • emsdk: This is the name of the manager script that Emscripten SDK is accessed through. Most operations are of the form emsdk command. To access the emsdk script, launch the Emscripten Command Prompt.

SDK Maintenance

The following tasks are common with the Emscripten SDK:

How do I work the emsdk utility?

Run emsdk help or just emsdk to get information about all available commands.

How do I check the installation status and version of the SDK and tools?

To get a list of all currently installed tools and SDK versions, and all available tools, run emsdk list.

  • A line will be printed for each tool/SDK that is available for installation.
  • The text INSTALLED will be shown for each tool that has already been installed.
  • If a tool/SDK is currently active, a star (*) will be shown next to it.
How do I install a tool/SDK version?

Run the command emsdk install <tool/sdk name> to download and install a new tool or an SDK version.

How do I remove a tool or an SDK?

Run the command emsdk uninstall <tool/sdk name> to delete the given tool or SDK from the local harddrive completely.

How do I check for updates to the Emscripten SDK?

The command emsdk update will fetch package information for all new tools and SDK versions. After that, run emsdk install <tool/sdk name> to install a new version.

How do I change the currently active SDK version?

You can toggle between different tools and SDK versions by running emsdk activate <tool/sdk name>.

How do I track the latest Emscripten development with the SDK?

A common and supported use case of the Emscripten SDK is to enable the workflow where you directly interact with the github repositories. This allows you to obtain new features and latest fixes immediately as they are pushed to the github repository, without having to wait for release to be tagged. You do not need a github account or a fork of Emscripten to do this. To switch to using the latest upstream git development branch incoming, run the following:

emsdk install git-1.8.3 # Install git. Skip if the system already has it.
emsdk install sdk-incoming-64bit # Clone+pull the latest kripken/emscripten/incoming.
emsdk activate sdk-incoming-64bit # Set the incoming SDK as the currently active one.

If you want to use the upstream stable branch master, then replace -incoming- with -master- above.

How do I use my own Emscripten github fork with the SDK?

It is also possible to use your own fork of the Emscripten repository via the SDK. This is achieved with standard git machinery, so there if you are already acquainted with working on multiple remotes in a git clone, these steps should be familiar to you. This is useful in the case when you want to make your own modifications to the Emscripten toolchain, but still keep using the SDK environment and tools. To set up your own fork as the currently active Emscripten toolchain, first install the sdk-incoming SDK like shown in the previous section, and then run the following commands in the emsdk directory:

cd emscripten/incoming
# Add a git remote link to your own repository.
git remote add myremote https://github.com/mygituseraccount/emscripten.git
# Obtain the changes in your link.
git fetch myremote
# Switch the emscripten-incoming tool to use your fork.
git checkout -b myincoming --track myremote/incoming

In this way you can utilize the Emscripten SDK tools while using your own git fork. You can switch back and forth between remotes via the git checkout command as usual.

Uninstalling the Emscripten SDK

If you installed the SDK using a NSIS installer on Windows, launch 'Control Panel' -> 'Uninstall a program' -> 'Emscripten SDK'.

If you want to remove a Portable SDK, just delete the directory where you put the Portable SDK into.

Platform-Specific Notes

Mac OS X

  • On OSX, the git tool will not be installed automatically. Git is not a required core component, and is only needed if you want to use one of the development branches emscripten-incoming or emscripten-master directly, instead of the fixed releases. To install git on OSX, you can

    1. Install XCode, and in XCode, install XCode Command Line Tools. This will provide git to the system PATH. For more help on this step, see http://stackoverflow.com/questions/9329243/xcode-4-4-command-line-tools
    2. Install git directly from http://git-scm.com/

  • Also, on OSX, java is not bundled with the Emscripten SDK. After installing emscripten via emsdk, typing 'emcc --help' should pop up a OSX dialog "Java is not installed. To open java, you need a Java SE 6 runtime. Would you like to install one now?" that will automatically download a Java runtime to the system.

  • Emscripten requires the command line tool 'python2' to be present on OSX. On default OSX installations, this does not exist. To manually work around this issue, see step 10 at https://github.com/kripken/emscripten/wiki/Getting-started-on-Mac-OS-X

Windows
  • The Visual Studio integration with the vs-tool package only supports Visual Studio 2010 at the moment, and requires the 32-bit version of emsdk to be used.
Add a custom footer
Add a custom sidebar
Clone this wiki locally