From 892b880515a589fa857cf5b16055ffd66194e4ea Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Wed, 4 Dec 2024 18:25:16 +0100
Subject: [PATCH 01/59] implement multi zone options

---
 src/libslic3r/Preset.cpp      |  7 ++++++-
 src/libslic3r/PrintConfig.cpp | 36 +++++++++++++++++++++++++++++++++++
 src/slic3r/GUI/Tab.cpp        | 29 +++++++++++++++++++++++++---
 3 files changed, 68 insertions(+), 4 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 30c9bc230f7..a9a89e84b77 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -822,6 +822,11 @@ static std::vector<std::string> s_Preset_filament_options {
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
+    "multi_zone_1_initial_layer", "multi_zone_1_temperature", "multi_zone_2_initial_layer", "multi_zone_2_temperature",
+    "multi_zone_3_initial_layer", "multi_zone_3_temperature", "multi_zone_4_initial_layer", "multi_zone_4_temperature",
+    "multi_zone_5_initial_layer", "multi_zone_5_temperature", "multi_zone_6_initial_layer", "multi_zone_6_temperature",
+    "multi_zone_7_initial_layer", "multi_zone_7_temperature", "multi_zone_8_initial_layer", "multi_zone_8_temperature",
+    "multi_zone_9_initial_layer", "multi_zone_9_temperature", "multi_zone_10_initial_layer", "multi_zone_10_temperature",
     // BBS
     "cool_plate_temp", "textured_cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "textured_cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
     // "bed_type",
@@ -876,7 +881,7 @@ static std::vector<std::string> s_Preset_printer_options {
     "cooling_tube_retraction",
     "cooling_tube_length", "high_current_on_filament_swap", "parking_pos_retraction", "extra_loading_move", "purge_in_prime_tower", "enable_filament_ramming",
     "z_offset",
-    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", "pellet_modded_printer", "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
+    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", "pellet_modded_printer", "multi_zone", "multi_zone_number", "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
     };
 
 static std::vector<std::string> s_Preset_sla_print_options {
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index d7812e6b420..3352b74e823 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2537,6 +2537,28 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->max = max_temp;
     def->set_default_value(new ConfigOptionInts { 200 });
+    
+    for (int zone = 1; zone <= 10; zone++) {
+        std::string zone_str = std::to_string(zone);
+
+        def             = this->add("multi_zone_" + zone_str + "_initial_layer", coInts);
+        def->label      = L("Initial layer");
+        def->full_label = L("Initial layer Zone " + zone_str + " temperature");
+        def->tooltip    = L("Zone " + zone_str + " temperature to print initial layer when using this filament");
+        def->sidetext   = L("°C");
+        def->min        = 0;
+        def->max        = max_temp;
+        def->set_default_value(new ConfigOptionInts{200});
+
+        def             = this->add("multi_zone_" + zone_str + "_temperature", coInts);
+        def->label      = L("Other layers");
+        def->tooltip    = L("Zone " + zone_str + " temperature for layers after the initial one");
+        def->sidetext   = L("°C");
+        def->full_label = L("Zone " + zone_str + " temperature");
+        def->min        = 0;
+        def->max        = max_temp;
+        def->set_default_value(new ConfigOptionInts{200});
+    }
 
     def = this->add("full_fan_speed_layer", coInts);
     def->label = L("Full fan speed at layer");
@@ -2813,6 +2835,20 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("Enable this option if your printer uses pellets instead of filaments");
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(false));
+    
+    def          = this->add("multi_zone", coBool);
+    def->label   = L("Multi heating zone");
+    def->tooltip = L("Enable this option if your printer uses multi heating zone");
+    def->mode    = comSimple;
+    def->set_default_value(new ConfigOptionBool(false));
+
+    def          = this->add("multi_zone_number", coInt);
+    def->label   = L("Zones");
+    def->tooltip = L("Number of heating zones");
+    def->mode    = comSimple;
+    def->min     = 1;
+    def->max     = 10;  
+    def->set_default_value(new ConfigOptionInt(1));	
 
     def = this->add("support_multi_bed_types", coBool);
     def->label = L("Support multi bed types");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 05b741bcb56..8b30ce4b11e 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3326,9 +3326,14 @@ void TabFilament::build()
         optgroup->append_single_option_line("activate_chamber_temp_control", "chamber-temperature");
 
         optgroup->append_separator();
-
-
         optgroup = page->new_optgroup(L("Print temperature"), L"param_extruder_temp");
+        for (int zone = 10; zone > 0; zone--) {
+            std::string zone_str = std::to_string(zone);
+            line                 = {L("Zone " + zone_str), L("Zone " + zone_str + " temperature when printing")};
+            line.append_option(optgroup->get_option("multi_zone_" + zone_str + "_initial_layer"));
+            line.append_option(optgroup->get_option("multi_zone_" + zone_str + "_temperature"));
+            optgroup->append_line(line);
+        }
         line = { L("Nozzle"), L("Nozzle temperature when printing") };
         line.append_option(optgroup->get_option("nozzle_temperature_initial_layer"));
         line.append_option(optgroup->get_option("nozzle_temperature"));
@@ -3625,6 +3630,18 @@ void TabFilament::toggle_options()
         bool is_pellet_printer = cfg.opt_bool("pellet_modded_printer");
         toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
+
+        bool is_multi_zone = cfg.opt_bool("multi_zone");
+        if (is_multi_zone) {
+            int zone_count = cfg.opt_int("multi_zone_number");
+            for (int zone = 10; zone > 0; zone--) {
+                std::string zone_str = std::to_string(zone);
+                toggle_line("multi_zone_" + zone_str + "_initial_layer", zone <= zone_count);
+                toggle_line("multi_zone_" + zone_str + "_temperature", zone <= zone_count);
+            }
+        }
+        toggle_line("nozzle_temperature_initial_layer", !is_multi_zone);
+        toggle_line("nozzle_temperature", !is_multi_zone);
     }
     if (m_active_page->title() == L("Setting Overrides"))
         update_filament_overrides_page(&cfg);
@@ -3745,6 +3762,8 @@ void TabPrinter::build_fff()
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
         optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("multi_zone");
+        optgroup->append_single_option_line("multi_zone_number");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");
@@ -4500,8 +4519,12 @@ void TabPrinter::toggle_options()
             toggle_line(el, is_BBL_printer);
 
         // SoftFever: hide non-BBL settings
-        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
+        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "multi_zone", "multi_zone_number", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
           toggle_line(el, !is_BBL_printer);
+
+        auto cfg           = m_preset_bundle->printers.get_edited_preset().config;
+        bool is_multi_zone = cfg.opt_bool("multi_zone");
+        toggle_line("multi_zone_number", is_multi_zone);
     }
 
     if (m_active_page->title() == L("Multimaterial")) {

From 6b42f8463801889ab9c430677999c999aa89303e Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 13:23:37 +0100
Subject: [PATCH 02/59] update m104 gcode comand

---
 src/libslic3r/GCode.cpp                | 117 +++++++++++++++++++------
 src/libslic3r/GCode/GCodeProcessor.cpp |   2 +-
 src/libslic3r/GCodeWriter.cpp          |  21 +++--
 src/libslic3r/GCodeWriter.hpp          |   4 +-
 src/libslic3r/PrintConfig.hpp          |  24 ++++-
 src/slic3r/GUI/Tab.cpp                 |  15 ++--
 6 files changed, 142 insertions(+), 41 deletions(-)

diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index f6c11632aa8..2a7e494db9a 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -3750,41 +3750,108 @@ LayerResult GCode::process_layer(
     }
 
     if (! first_layer && ! m_second_layer_things_done) {
-      if (print.is_BBL_printer()) {
+        if (print.is_BBL_printer()) {
         // BBS: open powerlost recovery
         {
-          gcode += "; open powerlost recovery\n";
-          gcode += "M1003 S1\n";
+            gcode += "; open powerlost recovery\n";
+            gcode += "M1003 S1\n";
         }
         // BBS: open first layer inspection at second layer
         if (print.config().scan_first_layer.value) {
-          // BBS: retract first to avoid droping when scan model
-          gcode += this->retract();
-          gcode += "M976 S1 P1 ; scan model before printing 2nd layer\n";
-          gcode += "M400 P100\n";
-          gcode += this->unretract();
+            // BBS: retract first to avoid droping when scan model
+            gcode += this->retract();
+            gcode += "M976 S1 P1 ; scan model before printing 2nd layer\n";
+            gcode += "M400 P100\n";
+            gcode += this->unretract();
         }
-      }
-      // Reset acceleration at sencond layer
-      // Orca: only set once, don't need to call set_accel_and_jerk
-      if (m_config.default_acceleration.value > 0 && m_config.initial_layer_acceleration.value > 0) {
+        }
+        // Reset acceleration at sencond layer
+        // Orca: only set once, don't need to call set_accel_and_jerk
+        if (m_config.default_acceleration.value > 0 && m_config.initial_layer_acceleration.value > 0) {
         gcode += m_writer.set_print_acceleration((unsigned int) floor(m_config.default_acceleration.value + 0.5));
-      }
+        }
 
-      if (m_config.default_jerk.value > 0 && m_config.initial_layer_jerk.value > 0) {
+        if (m_config.default_jerk.value > 0 && m_config.initial_layer_jerk.value > 0) {
         gcode += m_writer.set_jerk_xy(m_config.default_jerk.value);
-      }
+        }
 
-        // Transition from 1st to 2nd layer. Adjust nozzle temperatures as prescribed by the nozzle dependent
-        // nozzle_temperature_initial_layer vs. temperature settings.
-        for (const Extruder &extruder : m_writer.extruders()) {
-            if ((print.config().single_extruder_multi_material.value || m_ooze_prevention.enable) &&
-                extruder.id() != m_writer.extruder()->id())
-                // In single extruder multi material mode, set the temperature for the current extruder only.
-                continue;
-            int temperature = print.config().nozzle_temperature.get_at(extruder.id());
-            if (temperature > 0 && temperature != print.config().nozzle_temperature_initial_layer.get_at(extruder.id()))
-                gcode += m_writer.set_temperature(temperature, false, extruder.id());
+        if (print.config().multi_zone.value) {
+            // Transition from 1st to 2nd layer. Adjust nozzle temperatures as prescribed by the nozzle dependent
+            // nozzle_temperature_initial_layer vs. temperature settings.
+            for (const Extruder& extruder : m_writer.extruders()) {
+                if ((print.config().single_extruder_multi_material.value || m_ooze_prevention.enable) &&
+                    extruder.id() != m_writer.extruder()->id())
+                    // In single extruder multi material mode, set the temperature for the current extruder only.
+                    continue;
+
+                // Set temperature foreach zone in multi-zone mode
+                for (int zone = print.config().multi_zone_number.value; zone > 0; zone--) {
+                    std::string key         = "multi_zone_" + std::to_string(zone) + "_temperature";
+                    //TODO: change this switch with something smart 
+                    int temperature = 0; 
+                    int temperature_initaial_layer = 0; 
+                    switch (zone) {
+                        case 1: 
+                            temperature                = print.config().multi_zone_1_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_1_initial_layer.get_at(extruder.id());
+                            break;
+                        case 2: 
+                            temperature                = print.config().multi_zone_2_temperature.get_at(extruder.id()); 
+                            temperature_initaial_layer = print.config().multi_zone_2_initial_layer.get_at(extruder.id());
+                            break;
+                        case 3: 
+                            temperature                = print.config().multi_zone_3_temperature.get_at(extruder.id()); 
+                            temperature_initaial_layer = print.config().multi_zone_3_initial_layer.get_at(extruder.id());
+                            break;
+                        case 4: 
+                            temperature                = print.config().multi_zone_4_temperature.get_at(extruder.id()); 
+                            temperature_initaial_layer = print.config().multi_zone_4_initial_layer.get_at(extruder.id());
+                            break;
+                        case 5: 
+                            temperature                = print.config().multi_zone_5_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_5_initial_layer.get_at(extruder.id());
+                            break; 
+                        case 6: 
+                            temperature                = print.config().multi_zone_6_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_6_initial_layer.get_at(extruder.id());
+                            break;
+                        case 7: 
+                            temperature                = print.config().multi_zone_7_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_7_initial_layer.get_at(extruder.id());
+                            break;
+                        case 8: 
+                            temperature                = print.config().multi_zone_8_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_8_initial_layer.get_at(extruder.id());
+                            break;
+                        case 9: 
+                            temperature                = print.config().multi_zone_9_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_9_initial_layer.get_at(extruder.id());
+                            break;
+                        case 10:
+                            temperature                = print.config().multi_zone_10_temperature.get_at(extruder.id());
+                            temperature_initaial_layer = print.config().multi_zone_10_initial_layer.get_at(extruder.id());
+                            break;
+                    }
+
+
+                    if (temperature > 0 && temperature != temperature_initaial_layer)
+                        gcode += m_writer.set_temperature(temperature, false, extruder.id(), zone);
+                }
+
+            }
+        }
+        else {
+            // Transition from 1st to 2nd layer. Adjust nozzle temperatures as prescribed by the nozzle dependent
+            // nozzle_temperature_initial_layer vs. temperature settings.
+            for (const Extruder& extruder : m_writer.extruders()) {
+                if ((print.config().single_extruder_multi_material.value || m_ooze_prevention.enable) &&
+                    extruder.id() != m_writer.extruder()->id())
+                    // In single extruder multi material mode, set the temperature for the current extruder only.
+                    continue;
+                int temperature = print.config().nozzle_temperature.get_at(extruder.id());
+                if (temperature > 0 && temperature != print.config().nozzle_temperature_initial_layer.get_at(extruder.id()))
+                    gcode += m_writer.set_temperature(temperature, false, extruder.id());
+            }
         }
 
         // BBS
diff --git a/src/libslic3r/GCode/GCodeProcessor.cpp b/src/libslic3r/GCode/GCodeProcessor.cpp
index f1bae32ebc7..3b112f811f2 100644
--- a/src/libslic3r/GCode/GCodeProcessor.cpp
+++ b/src/libslic3r/GCode/GCodeProcessor.cpp
@@ -4967,7 +4967,7 @@ void GCodeProcessor::run_post_process()
                     } else {
                         std::string comment = "preheat T" + std::to_string(tool_number) +
                                               " time: " + std::to_string((int) std::round(time_diffs[0])) + "s";
-                        return GCodeWriter::set_temperature(temperature, this->m_flavor, false, tool_number, comment);
+                        return GCodeWriter::set_temperature(temperature, this->m_flavor, false, tool_number, -1, comment);
                     }
                 },
                 // line replacer
diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp
index aaef83b7a5e..08d73aa33bc 100644
--- a/src/libslic3r/GCodeWriter.cpp
+++ b/src/libslic3r/GCodeWriter.cpp
@@ -92,7 +92,7 @@ std::string GCodeWriter::postamble() const
     return gcode.str();
 }
 
-std::string GCodeWriter::set_temperature(unsigned int temperature, GCodeFlavor flavor, bool wait, int tool, std::string comment){
+std::string GCodeWriter::set_temperature(unsigned int temperature, GCodeFlavor flavor, bool wait, int tool, int zone, std::string comment){
     if (wait && (flavor == gcfMakerWare || flavor == gcfSailfish))
         return "";
 
@@ -107,12 +107,23 @@ std::string GCodeWriter::set_temperature(unsigned int temperature, GCodeFlavor f
         } else {
             code = "M104";
         }
-        if(comment.empty())
-            comment = "set nozzle temperature";
+        if (comment.empty()) {
+            if (zone != -1) {
+                comment = "set zone" + std::to_string(zone) + " temperature";
+            } else {
+                comment = "set nozzle temperature";
+            }
+        }
     }
 
     std::ostringstream gcode;
     gcode << code << " ";
+
+    //add zone if present 
+    if (zone != -1) {
+        gcode << "Z" << zone << " ";
+    }
+
     if (flavor == gcfMach3 || flavor == gcfMachinekit) {
         gcode << "P";
     } else {
@@ -134,12 +145,12 @@ std::string GCodeWriter::set_temperature(unsigned int temperature, GCodeFlavor f
     return gcode.str();
 }
 
-std::string GCodeWriter::set_temperature(unsigned int temperature, bool wait, int tool) const
+std::string GCodeWriter::set_temperature(unsigned int temperature, bool wait, int tool, int zone) const
 {
     // set tool to -1 to make sure we won't emit T parameter for single extruder or SEMM
     if (!this->multiple_extruders || m_single_extruder_multi_material)
         tool = -1;
-    return set_temperature(temperature, this->config.gcode_flavor, wait, tool);
+    return set_temperature(temperature, this->config.gcode_flavor, wait, tool, zone);
 }
 
 // BBS
diff --git a/src/libslic3r/GCodeWriter.hpp b/src/libslic3r/GCodeWriter.hpp
index 038325b446a..c1ad4e86807 100644
--- a/src/libslic3r/GCodeWriter.hpp
+++ b/src/libslic3r/GCodeWriter.hpp
@@ -43,9 +43,9 @@ class GCodeWriter {
     }
     std::string preamble();
     std::string postamble() const;
-    static std::string set_temperature(unsigned int temperature, GCodeFlavor flavor, bool wait = false, int tool = -1, std::string comment = std::string());
+    static std::string set_temperature(unsigned int temperature, GCodeFlavor flavor, bool wait = false, int tool = -1, int zone = -1, std::string comment = std::string());
 
-    std::string set_temperature(unsigned int temperature, bool wait = false, int tool = -1) const;
+    std::string set_temperature(unsigned int temperature, bool wait = false, int tool = -1, int zone = -1) const;
     std::string set_bed_temperature(int temperature, bool wait = false);
     std::string set_chamber_temperature(int temperature, bool wait = false);
     std::string set_print_acceleration(unsigned int acceleration)   { return set_acceleration_internal(Acceleration::Print, acceleration); }
diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index 18f007a40ad..d63ba72d9d7 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -1317,7 +1317,29 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionPoint,               bed_mesh_probe_distance))
     ((ConfigOptionFloat,               adaptive_bed_mesh_margin))
 
-
+    //Multi zone temps
+    ((ConfigOptionBool,                multi_zone))
+    ((ConfigOptionInt,                 multi_zone_number))
+    ((ConfigOptionInts,                multi_zone_1_temperature))
+    ((ConfigOptionInts,                multi_zone_1_initial_layer))
+    ((ConfigOptionInts,                multi_zone_2_temperature))
+    ((ConfigOptionInts,                multi_zone_2_initial_layer))
+    ((ConfigOptionInts,                multi_zone_3_temperature))
+    ((ConfigOptionInts,                multi_zone_3_initial_layer))
+    ((ConfigOptionInts,                multi_zone_4_temperature))
+    ((ConfigOptionInts,                multi_zone_4_initial_layer))
+    ((ConfigOptionInts,                multi_zone_5_temperature))
+    ((ConfigOptionInts,                multi_zone_5_initial_layer))
+    ((ConfigOptionInts,                multi_zone_6_temperature))
+    ((ConfigOptionInts,                multi_zone_6_initial_layer))
+    ((ConfigOptionInts,                multi_zone_7_temperature))
+    ((ConfigOptionInts,                multi_zone_7_initial_layer))
+    ((ConfigOptionInts,                multi_zone_8_temperature))
+    ((ConfigOptionInts,                multi_zone_8_initial_layer))
+    ((ConfigOptionInts,                multi_zone_9_temperature))
+    ((ConfigOptionInts,                multi_zone_9_initial_layer))
+    ((ConfigOptionInts,                multi_zone_10_temperature))
+    ((ConfigOptionInts,                multi_zone_10_initial_layer))
 )
 
 // This object is mapped to Perl as Slic3r::Config::Full.
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 8b30ce4b11e..9daf1259750 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3632,14 +3632,15 @@ void TabFilament::toggle_options()
         toggle_line("filament_diameter", !is_pellet_printer);
 
         bool is_multi_zone = cfg.opt_bool("multi_zone");
-        if (is_multi_zone) {
-            int zone_count = cfg.opt_int("multi_zone_number");
-            for (int zone = 10; zone > 0; zone--) {
-                std::string zone_str = std::to_string(zone);
-                toggle_line("multi_zone_" + zone_str + "_initial_layer", zone <= zone_count);
-                toggle_line("multi_zone_" + zone_str + "_temperature", zone <= zone_count);
-            }
+        int  zone_count    = is_multi_zone ? cfg.opt_int("multi_zone_number") : 0;
+
+        for (int zone = 10; zone > 0; zone--) {
+            std::string zone_str = std::to_string(zone);
+            bool        toggle   = is_multi_zone && zone <= zone_count;
+            toggle_line("multi_zone_" + zone_str + "_initial_layer", toggle);
+            toggle_line("multi_zone_" + zone_str + "_temperature", toggle);
         }
+
         toggle_line("nozzle_temperature_initial_layer", !is_multi_zone);
         toggle_line("nozzle_temperature", !is_multi_zone);
     }

From a74f7233a83efa7325d134118aa3eba9567ed52d Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:16:08 +0100
Subject: [PATCH 03/59] remove pellet_flow_coefficient and implement
 extruder_rotation_distance and mixing_stepper_rotation_distance

---
 src/libslic3r/Preset.cpp      |  2 +-
 src/libslic3r/Preset.hpp      | 11 ---------
 src/libslic3r/PrintConfig.cpp | 44 +++++++++++------------------------
 src/slic3r/GUI/Tab.cpp        | 17 ++++----------
 4 files changed, 19 insertions(+), 55 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 4eb5c5e949c..95d9b7fb692 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -818,7 +818,7 @@ static std::vector<std::string> s_Preset_print_options {
 };
 
 static std::vector<std::string> s_Preset_filament_options {
-    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "pellet_flow_coefficient", "filament_type", "filament_soluble", "filament_is_support",
+    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble", "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp
index 145ae5b6f7d..62c94cdbf81 100644
--- a/src/libslic3r/Preset.hpp
+++ b/src/libslic3r/Preset.hpp
@@ -319,17 +319,6 @@ class Preset
     BedType get_default_bed_type(PresetBundle *preset_bundle);
     bool has_cali_lines(PresetBundle* preset_bundle);
 
-
-    static double convert_pellet_flow_to_filament_diameter(double pellet_flow_coefficient)
-    {
-        return sqrt(4 / (PI * pellet_flow_coefficient)); 
-    }
-
-    static double convert_filament_diameter_to_pellet_flow(double filament_diameter)
-    {
-        return 4 / (pow(filament_diameter, 2) * PI); 
-    }
-
     static const std::vector<std::string>&  print_options();
     static const std::vector<std::string>&  filament_options();
     // Printer options contain the nozzle options.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index ac992d1ef8f..8275befff8d 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1933,37 +1933,19 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats { 1.75 });
 
-    /*
-        Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
-        The overall tech is very similar to FDM printing. 
-        It is FDM printing, but instead of filaments, it uses pellets.
-
-        The difference here is that where filaments have a filament_diameter that is used to calculate 
-        the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
-        devised for that particular pellet.
-
-        pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
-        Shape, material and density of an individual pellet will determine the packing density and
-        the only thing that matters for 3d printing is how much of that pellet material is extruded by 
-        one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
-        for your own pellets for a particular printer model.
-
-        We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
-        does already with very minor adjustments.
-
-        filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
-
-        sqrt just makes the relationship between flow_coefficient and volume linear.
-
-        higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
-        All other calculations remain the same for slicing.
-    */
-
-    def = this->add("pellet_flow_coefficient", coFloats);
-    def->label = L("Pellet flow coefficient");
-    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
-    def->min = 0;
-    def->set_default_value(new ConfigOptionFloats{ 0.4157 });
+    def          = this->add("extruder_rotation_distance", coFloat);
+    def->label   = L("Extruder rotation distance");
+    def->tooltip = L("Extruder rotation distance (mm³)");
+    def->sidetext = L("mm³");
+    def->min     = 0;
+    def->set_default_value(new ConfigOptionFloat(0));    
+    
+    def          = this->add("mixing_stepper_rotation_distance", coFloat);
+    def->label   = L("Mixing stepper rotation distance");
+    def->tooltip = L("Mixing stepper rotation distance (mm³)");
+    def->sidetext = L("mm³");
+    def->min     = 0;
+    def->set_default_value(new ConfigOptionFloat(0));
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 9ec397be776..64b9ed5bdad 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1412,19 +1412,12 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         }
     }
 
-
-    if (opt_key == "pellet_flow_coefficient") 
+    if (m_preset_bundle->printers.get_edited_preset().config.opt_bool("pellet_modded_printer")) 
     {
-        double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
+        double double_value = sqrt(4 / PI);
         m_config->set_key_value("filament_diameter", new ConfigOptionFloats{double_value});
 	}
-
-    if (opt_key == "filament_diameter") {
-        double double_value = Preset::convert_filament_diameter_to_pellet_flow(boost::any_cast<double>(value));
-        m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
-    }
-    
-
+ 
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3303,7 +3296,8 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_distance");
+        optgroup->append_single_option_line("mixing_stepper_rotation_distance");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3628,7 +3622,6 @@ void TabFilament::toggle_options()
         toggle_line("adaptive_pressure_advance_bridges", has_adaptive_pa && pa);
 
         bool is_pellet_printer = cfg.opt_bool("pellet_modded_printer");
-        toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
 
         bool support_chamber_temp_control = this->m_preset_bundle->printers.get_edited_preset().config.opt_bool("support_chamber_temp_control");

From 41eb4d4bda76cf5f963eb4d289f18233c9abf49b Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:22:52 +0100
Subject: [PATCH 04/59] remove refererence to pellet-flow-coefficient

---
 src/slic3r/GUI/Tab.cpp | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 64b9ed5bdad..b017428366c 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3748,7 +3748,7 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_modded_printer");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");

From e5ee969b0444d1948d11111efd11e920cd2a0ec6 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:32:59 +0100
Subject: [PATCH 05/59] update description for rotation distance parameters

---
 src/libslic3r/PrintConfig.cpp | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 8275befff8d..8ab6729f96b 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1935,14 +1935,14 @@ void PrintConfigDef::init_fff_params()
 
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
-    def->tooltip = L("Extruder rotation distance (mm³)");
+    def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(0));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
-    def->tooltip = L("Mixing stepper rotation distance (mm³)");
+    def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(0));

From c64ec17311930fb5d32cf34a90eaf8ed297df540 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 14:39:15 +0100
Subject: [PATCH 06/59] restore pellet-flow-coefficient logic

---
 src/libslic3r/Preset.cpp      |  4 +++-
 src/libslic3r/Preset.hpp      | 11 +++++++++++
 src/libslic3r/PrintConfig.cpp | 31 ++++++++++++++++++++++++++++---
 src/slic3r/GUI/Tab.cpp        | 29 +++++++++++++++++++++--------
 4 files changed, 63 insertions(+), 12 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 95d9b7fb692..bf7ab47f499 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -818,7 +818,9 @@ static std::vector<std::string> s_Preset_print_options {
 };
 
 static std::vector<std::string> s_Preset_filament_options {
-    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble", "filament_is_support",
+    /*"filament_colour", */ "default_filament_colour", "required_nozzle_HRC", "filament_diameter", "pellet_flow_coefficient",
+    "pellet_flow_coefficient", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble",
+    "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp
index 62c94cdbf81..145ae5b6f7d 100644
--- a/src/libslic3r/Preset.hpp
+++ b/src/libslic3r/Preset.hpp
@@ -319,6 +319,17 @@ class Preset
     BedType get_default_bed_type(PresetBundle *preset_bundle);
     bool has_cali_lines(PresetBundle* preset_bundle);
 
+
+    static double convert_pellet_flow_to_filament_diameter(double pellet_flow_coefficient)
+    {
+        return sqrt(4 / (PI * pellet_flow_coefficient)); 
+    }
+
+    static double convert_filament_diameter_to_pellet_flow(double filament_diameter)
+    {
+        return 4 / (pow(filament_diameter, 2) * PI); 
+    }
+
     static const std::vector<std::string>&  print_options();
     static const std::vector<std::string>&  filament_options();
     // Printer options contain the nozzle options.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 8ab6729f96b..38e427bbe15 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1933,19 +1933,44 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats { 1.75 });
 
+    /*
+        Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
+        The overall tech is very similar to FDM printing. 
+        It is FDM printing, but instead of filaments, it uses pellets.
+        The difference here is that where filaments have a filament_diameter that is used to calculate 
+        the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
+        devised for that particular pellet.
+        pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
+        Shape, material and density of an individual pellet will determine the packing density and
+        the only thing that matters for 3d printing is how much of that pellet material is extruded by 
+        one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
+        for your own pellets for a particular printer model.
+        We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
+        does already with very minor adjustments.
+        filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
+        sqrt just makes the relationship between flow_coefficient and volume linear.
+        higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
+        All other calculations remain the same for slicing.
+    */
+
+    def = this->add("pellet_flow_coefficient", coFloats);
+    def->label = L("Pellet flow coefficient");
+    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
+    def->min = 0;
+    def->set_default_value(new ConfigOptionFloats{ 0.4157 });
+
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
     def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(0));    
+    def->set_default_value(new ConfigOptionFloat(456));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
     def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
-    def->sidetext = L("mm³");
     def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(0));
+    def->set_default_value(new ConfigOptionFloat(6000));
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index b017428366c..8949a1e9c99 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1411,13 +1411,18 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             og_freq_chng_params->set_value("brim", val);
         }
     }
-
-    if (m_preset_bundle->printers.get_edited_preset().config.opt_bool("pellet_modded_printer")) 
+ 
+    if (opt_key == "pellet_flow_coefficient") 
     {
-        double double_value = sqrt(4 / PI);
+        double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
         m_config->set_key_value("filament_diameter", new ConfigOptionFloats{double_value});
-	}
- 
+    }
+
+    if (opt_key == "filament_diameter") {
+        double double_value = Preset::convert_filament_diameter_to_pellet_flow(boost::any_cast<double>(value));
+        m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
+    }
+
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3296,8 +3301,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("extruder_rotation_distance");
-        optgroup->append_single_option_line("mixing_stepper_rotation_distance");
+        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_distance", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("mixing_stepper_rotation_distance", "pellet-flow-coefficient");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3622,6 +3628,7 @@ void TabFilament::toggle_options()
         toggle_line("adaptive_pressure_advance_bridges", has_adaptive_pa && pa);
 
         bool is_pellet_printer = cfg.opt_bool("pellet_modded_printer");
+        toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
 
         bool support_chamber_temp_control = this->m_preset_bundle->printers.get_edited_preset().config.opt_bool("support_chamber_temp_control");
@@ -3629,6 +3636,12 @@ void TabFilament::toggle_options()
 
         for (auto el : {"supertack_plate_temp", "supertack_plate_temp_initial_layer", "cool_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp", "eng_plate_temp_initial_layer", "textured_plate_temp", "textured_plate_temp_initial_layer"})
             toggle_line(el, is_BBL_printer);
+            
+        toggle_line("extruder_rotation_distance", is_pellet_printer);
+        toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
+        if (is_pellet_printer) {
+            m_config->set_key_value("filament_diameter", new ConfigOptionFloats{sqrt(4 / PI)});
+        }
     }
     if (m_active_page->title() == L("Setting Overrides"))
         update_filament_overrides_page(&cfg);
@@ -3748,7 +3761,7 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer");
+        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");

From 359c6bdbf79ac88694df08eeebc4d79e7d84f281 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 14:42:23 +0100
Subject: [PATCH 07/59] fix code formatting

---
 src/libslic3r/PrintConfig.cpp | 6 ++++++
 src/slic3r/GUI/Tab.cpp        | 4 +++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 38e427bbe15..43dbbbaea4d 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1937,18 +1937,24 @@ void PrintConfigDef::init_fff_params()
         Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
         The overall tech is very similar to FDM printing. 
         It is FDM printing, but instead of filaments, it uses pellets.
+        
         The difference here is that where filaments have a filament_diameter that is used to calculate 
         the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
         devised for that particular pellet.
+        
         pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
         Shape, material and density of an individual pellet will determine the packing density and
         the only thing that matters for 3d printing is how much of that pellet material is extruded by 
         one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
         for your own pellets for a particular printer model.
+        
         We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
         does already with very minor adjustments.
+        
         filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
+        
         sqrt just makes the relationship between flow_coefficient and volume linear.
+        
         higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
         All other calculations remain the same for slicing.
     */
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 8949a1e9c99..b03a9e6423f 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1411,7 +1411,8 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             og_freq_chng_params->set_value("brim", val);
         }
     }
- 
+
+
     if (opt_key == "pellet_flow_coefficient") 
     {
         double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
@@ -1423,6 +1424,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
     }
 
+
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);

From fca8a22c2c0e90cc9456dce68535a0916f73da5f Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 15:18:53 +0100
Subject: [PATCH 08/59] update doc

---
 doc/pellet-flow-coefficient.md | 44 +++++++++++++++++++++-------------
 src/libslic3r/PrintConfig.cpp  |  6 ++---
 2 files changed, 30 insertions(+), 20 deletions(-)

diff --git a/doc/pellet-flow-coefficient.md b/doc/pellet-flow-coefficient.md
index 8e91312ad63..87df0316b70 100644
--- a/doc/pellet-flow-coefficient.md
+++ b/doc/pellet-flow-coefficient.md
@@ -1,23 +1,33 @@
-Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
-The overall tech is very similar to FDM printing.
-It is FDM printing, but instead of filaments, it uses pellets.
+# Pellet Flow Coefficient
+## Introduction
+Pellet 3D printers, commonly used for print volumes around 1m³, rely on technology similar to FDM printing. However, instead of using filaments, these printers utilize pellets as the printing material.
 
-The difference here is that where filaments have a filament_diameter that is used to calculate
-the volume of filament ingested, pellets have a particular flow_coefficient that is empirically
-devised for that particular pellet.
+The main difference compared to filament-based printing lies in the fact that, while filament_diameter is a fixed value used to calculate the volume of extruded material, pellets require a specific coefficient: the pellet_flow_coefficient. This coefficient is empirically derived for a particular type of pellet and printer configuration.
 
-pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
-Shape, material and density of an individual pellet will determine the packing density and
-the only thing that matters for 3d printing is how much of that pellet material is extruded by
-one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
-for your own pellets for a particular printer model.
+## Pellet Flow Coefficient
+The pellet_flow_coefficient is a value about pellets extrusion capacity, influenced by factors such as shape, material, and individual material viscosity. This value determines how much material is extruded per turn of the printer's feeding mechanism.
 
-We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it
-does already with very minor adjustments.
+Internally, the pellet_flow_coefficient is translated into an equivalent filament_diameter value to maintain compatibility with traditional volumetric calculations used in FDM printing. The formula is:
 
-filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )
+*filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
 
-sqrt just makes the relationship between flow_coefficient and volume linear.
+### Relationship Between Pellet Flow Coefficient and Material Flow
+- Higher packing density → More material extruded per turn → Higher pellet_flow_coefficient → Simulated as a filament with a larger diameter.
+- Reducing the pellet_flow_coefficient by 20% is equivalent to decreasing the extrusion flow by 20%.
+
+### Advantages of Pellet Flow Coefficient
+- If the rotation distance is fixed, the pellet_flow_coefficient allows control over the extruder’s flow percentage without modifying the simulated filament diameter.
+- For printers that support dynamic modification of the rotation distance (e.g., with Klipper using the `SET_ROTATION_DISTANCE` command), the pellet_flow_coefficient can be set to 1, and the rotation distance becomes the reference value for extruded volume.
+
+## Extruder Rotation Distance
+The rotation distance represents the volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is essential for accurately configuring the printer to achieve precise prints.
+
+### Usage
+To use this value during printing, it must be explicitly called within the startup script `START_PRINT`.
+
+## Mixing Stepper Rotation Distance
+The mixing stepper rotation distance is the value that controls how much material is actively fed into the extruder by the feeding mechanism.
+
+### Usage
+This parameter also needs to be explicitly called in the startup script `START_PRINT` to correctly configure the material flow during printing.
 
-higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
-All other calculations remain the same for slicing.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 43dbbbaea4d..dfc75aac9ec 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1961,20 +1961,20 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("pellet_flow_coefficient", coFloats);
     def->label = L("Pellet flow coefficient");
-    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
+    def->tooltip = L("A value representing the extrusion capacity of pellets, influenced by factors such as shape, material, and viscosity. It determines how much material is extruded per turn and is converted to an equivalent filament diameter for volumetric calculations.");
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
-    def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
+    def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(456));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
-    def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
+    def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(6000));
 

From 75e5ac5a04468c3c97e80ff34e5192dffd531e0b Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 17:02:16 +0100
Subject: [PATCH 09/59] incorrect removal code

---
 src/slic3r/GUI/Tab.cpp | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index b03a9e6423f..f7d4f9f8570 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3641,9 +3641,6 @@ void TabFilament::toggle_options()
             
         toggle_line("extruder_rotation_distance", is_pellet_printer);
         toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
-        if (is_pellet_printer) {
-            m_config->set_key_value("filament_diameter", new ConfigOptionFloats{sqrt(4 / PI)});
-        }
     }
     if (m_active_page->title() == L("Setting Overrides"))
         update_filament_overrides_page(&cfg);

From 2787e131308d642f2978aae885b3b1ffc33cf3c1 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 11:49:36 +0100
Subject: [PATCH 10/59] update fields

---
 src/libslic3r/Preset.cpp      |  6 ++++--
 src/libslic3r/PrintConfig.cpp | 27 +++++++++++++++++++++++----
 src/slic3r/GUI/Tab.cpp        | 33 +++++++++++++++++++++++++++++----
 3 files changed, 56 insertions(+), 10 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index bf7ab47f499..9aa78d7cc07 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -819,7 +819,7 @@ static std::vector<std::string> s_Preset_print_options {
 
 static std::vector<std::string> s_Preset_filament_options {
     /*"filament_colour", */ "default_filament_colour", "required_nozzle_HRC", "filament_diameter", "pellet_flow_coefficient",
-    "pellet_flow_coefficient", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble",
+    "pellet_flow_coefficient", "extruder_rotation_volume", "mixing_stepper_rotation_volume", "filament_type", "filament_soluble",
     "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
@@ -878,7 +878,9 @@ static std::vector<std::string> s_Preset_printer_options {
     "cooling_tube_retraction",
     "cooling_tube_length", "high_current_on_filament_swap", "parking_pos_retraction", "extra_loading_move", "purge_in_prime_tower", "enable_filament_ramming",
     "z_offset",
-    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", "pellet_modded_printer", "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
+    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", 
+    "pellet_modded_printer", "use_extruder_rotation_volume", "use_active_pellet_feeding", "active_feeder_motor_name", 
+    "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
     };
 
 static std::vector<std::string> s_Preset_sla_print_options {
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index dfc75aac9ec..8c70f8e85bf 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1965,15 +1965,15 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
-    def          = this->add("extruder_rotation_distance", coFloat);
-    def->label   = L("Extruder rotation distance");
+    def          = this->add("extruder_rotation_volume", coFloat);
+    def->label   = L("Extruder rotation volume");
     def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(456));    
     
-    def          = this->add("mixing_stepper_rotation_distance", coFloat);
-    def->label   = L("Mixing stepper rotation distance");
+    def          = this->add("mixing_stepper_rotation_volume", coFloat);
+    def->label   = L("Mixing stepper rotation volume");
     def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(6000));
@@ -2850,6 +2850,25 @@ void PrintConfigDef::init_fff_params()
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(false));
 
+    def          = this->add("use_extruder_rotation_volume", coBool);
+    def->label   = L("Use extruder rotation volume");
+    def->tooltip = L("Use extruder rotation volume instead of the pellet flow coefficent");
+    def->mode    = comSimple;
+    def->set_default_value(new ConfigOptionBool(true));
+    
+    def          = this->add("active_feeder_motor_name", coString);
+    def->label   = L("Active feeder motor name");
+    def->tooltip = "Name that identify the feeder motor";
+    def->mode    = comAdvanced;
+    def->set_default_value(new ConfigOptionString(""));
+
+        
+    def          = this->add("use_active_pellet_feeding", coBool);
+    def->label   = L("Use forded pellet feeding");
+    def->tooltip = L("Enable this option if your printer has active pellet feeding");
+    def->mode    = comSimple;
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("support_multi_bed_types", coBool);
     def->label = L("Support multi bed types");
     def->tooltip = L("Enable this option if you want to use multiple bed types");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index f7d4f9f8570..59c39931b5a 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1424,7 +1424,6 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
     }
 
-
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3304,8 +3303,8 @@ void TabFilament::build()
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
         optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("extruder_rotation_distance", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("mixing_stepper_rotation_distance", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "pellet-flow-coefficient");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3641,7 +3640,17 @@ void TabFilament::toggle_options()
             
         toggle_line("extruder_rotation_distance", is_pellet_printer);
         toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
+        toggle_line("extruder_rotation_volume", is_pellet_printer);
+        toggle_line("mixing_stepper_rotation_volume", is_pellet_printer);
+
+        bool use_active_pellet_feeding = cfg.opt_bool("use_active_pellet_feeding");
+        toggle_line("mixing_stepper_rotation_volume", is_pellet_printer && use_active_pellet_feeding);
+
+        bool use_extruder_rotation_volume = cfg.opt_bool("use_extruder_rotation_volume");
+        toggle_line("extruder_rotation_volume", is_pellet_printer && use_extruder_rotation_volume);
+        toggle_line("pellet_flow_coefficient", is_pellet_printer && !use_extruder_rotation_volume);
     }
+
     if (m_active_page->title() == L("Setting Overrides"))
         update_filament_overrides_page(&cfg);
 
@@ -3761,6 +3770,8 @@ void TabPrinter::build_fff()
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
         optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("use_extruder_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("use_active_pellet_feeding", "pellet-flow-coefficient");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");
@@ -4362,6 +4373,8 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("long_retractions_when_cut", "", extruder_idx);
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
+                optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
+                optgroup->append_single_option_line("active_feeder_motor_name", "pellet-flow-coefficient", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 
@@ -4516,8 +4529,14 @@ void TabPrinter::toggle_options()
             toggle_line(el, is_BBL_printer);
 
         // SoftFever: hide non-BBL settings
-        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
+        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "use_extruder_rotation_volume", "use_active_pellet_feeding", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
           toggle_line(el, !is_BBL_printer);
+
+
+        bool is_pellet_printer = m_config->opt_bool("pellet_modded_printer");
+        auto gcf               = m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value;
+        toggle_line("use_active_pellet_feeding", is_pellet_printer && gcf == gcfKlipper);
+        toggle_line("use_extruder_rotation_volume", is_pellet_printer && gcf == gcfKlipper);
     }
 
     if (m_active_page->title() == L("Multimaterial")) {
@@ -4615,6 +4634,12 @@ void TabPrinter::toggle_options()
         //toggle_option("retraction_distances_when_cut", m_config->opt_bool("long_retractions_when_cut",i),i);
         
         toggle_option("travel_slope", m_config->opt_enum("z_hop_types", i) != ZHopType::zhtNormal, i);
+
+        bool is_pellet_printer = m_config->opt_bool("pellet_modded_printer");
+        bool use_active_pellet_feeding = m_config->opt_bool("use_active_pellet_feeding");
+        auto gcf               = m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value;
+        toggle_option("active_feeder_motor_name", is_pellet_printer && gcf == gcfKlipper && use_active_pellet_feeding, i);
+        toggle_line("active_feeder_motor_name#0", is_pellet_printer && gcf == gcfKlipper && use_active_pellet_feeding);
     }
 
     if (m_active_page->title() == L("Motion ability")) {

From 9189d087239df3fea581089f541569e9e3ae6249 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 16:44:57 +0100
Subject: [PATCH 11/59] add SET_EXTRUDER_ROTATION_DISTANCE inside gcode

---
 src/libslic3r/GCode.cpp       |  8 ++++++++
 src/libslic3r/GCodeWriter.cpp | 30 ++++++++++++++++++++++++++++++
 src/libslic3r/GCodeWriter.hpp |  2 ++
 src/libslic3r/PrintConfig.cpp | 25 +++++++++++++------------
 4 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index 29769752dac..cf6a89cf33e 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -6280,6 +6280,14 @@ std::string GCode::set_extruder(unsigned int extruder_id, double print_z, bool b
             m_pa_processor->resetPreviousPA(m_config.pressure_advance.get_at(extruder_id));
         }
 
+        if (m_config.use_extruder_rotation_volume.value) {
+            gcode += m_writer.add_rotation_volume(extruder_id, m_config.extruder_rotation_volume.get_at(extruder_id));
+            if (m_config.use_active_pellet_feeding.value) {
+                gcode += m_writer.add_rotation_volume(m_config.active_feeder_motor_name.get_at(extruder_id),
+                                                      m_config.mixing_stepper_rotation_volume.get_at(extruder_id));
+            }
+        }
+
         gcode += m_writer.toolchange(extruder_id);
         return gcode;
     }
diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp
index aaef83b7a5e..de765738a97 100644
--- a/src/libslic3r/GCodeWriter.cpp
+++ b/src/libslic3r/GCodeWriter.cpp
@@ -407,6 +407,36 @@ std::string GCodeWriter::toolchange(unsigned int extruder_id)
     return gcode.str();
 }
 
+std::string GCodeWriter::add_rotation_volume(unsigned int extruder_id, double value)
+{
+    std::ostringstream gcode;
+    if (FLAVOR_IS(gcfKlipper)) {
+        std::string name = "extruder";
+        if (extruder_id > 0)
+            name += std::to_string(extruder_id);
+        gcode << add_rotation_volume(name, value);
+    }
+
+    // TODO: support other flavors
+
+    return gcode.str();
+}
+
+std::string GCodeWriter::add_rotation_volume(const std::string &name, double value)
+{ 
+    std::ostringstream gcode;
+    if (FLAVOR_IS(gcfKlipper)) {
+        //https://www.klipper3d.org/it/G-Codes.html?h=set_ex#set_extruder_rotation_distance
+        gcode << "SET_EXTRUDER_ROTATION_DISTANCE";
+        gcode << " EXTRUDER=" << name;
+        gcode << " DISTANCE=" << value << "\n";
+    }
+
+    // TODO: support other flavors
+
+    return gcode.str(); 
+}
+
 std::string GCodeWriter::set_speed(double F, const std::string &comment, const std::string &cooling_marker)
 {
     assert(F > 0.);
diff --git a/src/libslic3r/GCodeWriter.hpp b/src/libslic3r/GCodeWriter.hpp
index 038325b446a..fa5da6a424e 100644
--- a/src/libslic3r/GCodeWriter.hpp
+++ b/src/libslic3r/GCodeWriter.hpp
@@ -65,6 +65,8 @@ class GCodeWriter {
     // printed with the same extruder.
     std::string toolchange_prefix() const;
     std::string toolchange(unsigned int extruder_id);
+    std::string add_rotation_volume(unsigned int extruder_id, double value);
+    std::string add_rotation_volume(const std::string& name, double value);
     std::string set_speed(double F, const std::string &comment = std::string(), const std::string &cooling_marker = std::string());
     // SoftFever NOTE: the returned speed is mm/minute
     double      get_current_speed() const { return m_current_speed;}
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 8c70f8e85bf..90f35f188a6 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1965,18 +1965,19 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
-    def          = this->add("extruder_rotation_volume", coFloat);
-    def->label   = L("Extruder rotation volume");
-    def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
+    def           = this->add("extruder_rotation_volume", coFloats);
+    def->label    = L("Extruder rotation volume");
+    def->tooltip  = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
-    def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(456));    
+    def->min      = 0;
+    def->set_default_value(new ConfigOptionFloats{456});    
     
-    def          = this->add("mixing_stepper_rotation_volume", coFloat);
-    def->label   = L("Mixing stepper rotation volume");
-    def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
-    def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(6000));
+    def           = this->add("mixing_stepper_rotation_volume", coFloats);
+    def->label    = L("Mixing stepper rotation volume");
+    def->tooltip  = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
+    def->sidetext = L("mm³");
+    def->min      = 0;
+    def->set_default_value(new ConfigOptionFloats{6000});
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
@@ -2856,11 +2857,11 @@ void PrintConfigDef::init_fff_params()
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(true));
     
-    def          = this->add("active_feeder_motor_name", coString);
+    def          = this->add("active_feeder_motor_name", coStrings);
     def->label   = L("Active feeder motor name");
     def->tooltip = "Name that identify the feeder motor";
     def->mode    = comAdvanced;
-    def->set_default_value(new ConfigOptionString(""));
+    def->set_default_value(new ConfigOptionStrings());
 
         
     def          = this->add("use_active_pellet_feeding", coBool);

From 95c38aff5a84a3b3ddde97bd98f94329f454ca9f Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 16:08:54 +0100
Subject: [PATCH 12/59] add SET_EXTRUDER_ROTATION_DISTANCE inside gcode

---
 src/libslic3r/PrintConfig.hpp | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index ee522dab0de..dc708058008 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -1169,9 +1169,16 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionBool,                support_multi_bed_types))
 
     // Small Area Infill Flow Compensation
-    ((ConfigOptionStrings,              small_area_infill_flow_compensation_model))
+    ((ConfigOptionStrings,             small_area_infill_flow_compensation_model))
 
     ((ConfigOptionBool,                has_scarf_joint_seam))
+
+    ((ConfigOptionBool,                use_extruder_rotation_volume))
+    ((ConfigOptionBool,                use_active_pellet_feeding))
+    ((ConfigOptionStrings,             active_feeder_motor_name))
+    ((ConfigOptionFloats,              extruder_rotation_volume))
+    ((ConfigOptionFloats,              mixing_stepper_rotation_volume))
+
 )
 
 // This object is mapped to Perl as Slic3r::Config::Print.

From 999bf4080cce3ce9f4462d5e02bbb9dcae34a8a7 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 16:47:01 +0100
Subject: [PATCH 13/59] add doc e fix multi material mode

---
 doc/Pellet-modded-printer.md   | 65 ++++++++++++++++++++++++++++++++++
 doc/pellet-flow-coefficient.md | 33 -----------------
 src/libslic3r/PrintConfig.cpp  |  2 +-
 src/slic3r/GUI/Tab.cpp         |  2 +-
 4 files changed, 67 insertions(+), 35 deletions(-)
 create mode 100644 doc/Pellet-modded-printer.md
 delete mode 100644 doc/pellet-flow-coefficient.md

diff --git a/doc/Pellet-modded-printer.md b/doc/Pellet-modded-printer.md
new file mode 100644
index 00000000000..872710dd196
--- /dev/null
+++ b/doc/Pellet-modded-printer.md
@@ -0,0 +1,65 @@
+# Pellet modded printer
+Le stampanti 3D a pellet, comunemente utilizzate per stampe di grandi dimensioni (solitamente superiori a 1m³), si basano su una tecnologia simile alla stampa FDM. Tuttavia, anziché utilizzare filamenti, queste stampanti impiegano pellet come materiale di stampa.
+L'uso dei pellet comporta una gestione dell'estrusione diversa rispetto alle stampanti a filamento tradizionali, a causa di:
+
+- La presenza di aria tra i pellet.
+- Dimensioni variabili del particolato a seconda del materiale.
+- Necessità di sistemi di alimentazione attivi.
+
+Questo richiede parametri aggiuntivi per una corretta configurazione dell'estrusione.
+
+## pellet flow coefficient
+Il pellet flow coefficient è un parametro che rappresenta la capacità di estrusione dei pellet, influenzata da fattori quali:
+
+- Forma del pellet.
+- Tipo di materiale.
+- Viscosità del materiale.
+
+### Funzionamento
+Questo valore definisce la quantità di materiale estruso per ogni giro del meccanismo di alimentazione. Internamente, il coefficiente viene convertito in un valore equivalente di `filament_diameter` per garantire compatibilità con i calcoli volumetrici standard FDM.
+
+La formula utilizzata è: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
+
+- Maggiore densità di riempimento → Maggior materiale estruso → Coefficiente di flusso più alto → Simulazione di un filamento con diametro maggiore.
+- Una riduzione del coefficiente del 20% corrisponde a una riduzione lineare del flusso del 20%.
+
+In stampanti dove non è possibile regolare la distanza di rotazione del motore dell'estrusore, il pellet_flow_coefficient permette di controllare la percentuale di flusso modificando il diametro del filamento simulato.
+
+>**ATTENZIONE:** Modulare l'estrusione modificando il diametro del filamento virtuale causa tuttavia un errore di lettura della quantità estrusa dalla stampante all'interno del firmware utilizzato.
+Ad esempio su un firmware klipper si avrà una lettura a schermo del flusso di stampa differente da quello realmente in corso.
+utilizzare questo metodo causa anche problemi con il valore di retraction e unretraction, in quanto la conversione col filamneto virtuale altera i valori reali. 
+
+
+
+## Extruder Rotation Volume
+La extruder rotation volume rappresenta il volume di materiale estruso (in mm³) per ogni giro completo del motore dell'estrusore. Questo parametro offre una maggiore precisione nella configurazione rispetto al pellet flow coefficient, eliminando errori di calcolo dovuti alla simulazione del diametro del filamento virtuale.
+
+### Configurazione tramite Filamento Virtuale con Area di 1 mm²
+Per semplificare ulteriormente il calcolo del volume estruso e sincronizzare i parametri della stampante con i valori di volume nel G-code, è possibile simulare un filamento virtuale con un'area trasversale di 1 mm². In questo modo, i valori di estrusione 𝐸 nel G-code rappresentano direttamente il volume in mm³.
+
+#### Passaggi per l'implementazione
+1. **Impostazione del Pellet Flow Coefficient:** Simulare un filamento con un'area trasversale di 1 mm² impostando il pellet flow coefficent ad 1.
+2. **Configurazione della Extruder Rotation Volume:** Determina quanti mm³ di materiale vengono estrusi per ogni giro completo del motore dell'estrusore. Questo parametro dipende dalla geometria della vite o dell'ingranaggio dell'estrusore e può essere calibrato sperimentalmente.
+Inserisci il valore ottenuto nella configurazione del materiale come extruder rotation volume.
+3. **Imposta il filament_diameter** pari a 1.1284 all'interno del firmware della proprio stampante
+
+### Vantaggi del Sistema
+- Eliminazione degli errori di conversione: Non è necessario simulare filamenti di diverso diametro, riducendo gli errori.
+- Maggiore precisione: L'utilizzo del volume estruso diretto nel G-code rende la calibrazione più semplice e accurata.
+- Compatibilità dinamica: Con firmware come Klipper, puoi aggiornare i parametri in tempo reale senza dover riscrivere il G-code.
+
+>**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
+
+
+
+## Mixing Stepper Rotation Volume
+La mixing stepper rotation volume indica il volume di materiale (in mm³) immesso attivamente nell'estrusore tramite un motore dedicato.
+
+### Utilizzo
+Per utilizzare questa funzionalità, è necessario:
+
+- Abilitare l'opzione nelle impostazioni della stampante.
+- Definire il nome identificativo del motore che gestisce il feeding nelle impostazioni dell'estrusore.
+- Configurare il valore di mixing_stepper_rotation_volume nelle impostazioni del materiale.
+
+>**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
\ No newline at end of file
diff --git a/doc/pellet-flow-coefficient.md b/doc/pellet-flow-coefficient.md
deleted file mode 100644
index 87df0316b70..00000000000
--- a/doc/pellet-flow-coefficient.md
+++ /dev/null
@@ -1,33 +0,0 @@
-# Pellet Flow Coefficient
-## Introduction
-Pellet 3D printers, commonly used for print volumes around 1m³, rely on technology similar to FDM printing. However, instead of using filaments, these printers utilize pellets as the printing material.
-
-The main difference compared to filament-based printing lies in the fact that, while filament_diameter is a fixed value used to calculate the volume of extruded material, pellets require a specific coefficient: the pellet_flow_coefficient. This coefficient is empirically derived for a particular type of pellet and printer configuration.
-
-## Pellet Flow Coefficient
-The pellet_flow_coefficient is a value about pellets extrusion capacity, influenced by factors such as shape, material, and individual material viscosity. This value determines how much material is extruded per turn of the printer's feeding mechanism.
-
-Internally, the pellet_flow_coefficient is translated into an equivalent filament_diameter value to maintain compatibility with traditional volumetric calculations used in FDM printing. The formula is:
-
-*filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
-
-### Relationship Between Pellet Flow Coefficient and Material Flow
-- Higher packing density → More material extruded per turn → Higher pellet_flow_coefficient → Simulated as a filament with a larger diameter.
-- Reducing the pellet_flow_coefficient by 20% is equivalent to decreasing the extrusion flow by 20%.
-
-### Advantages of Pellet Flow Coefficient
-- If the rotation distance is fixed, the pellet_flow_coefficient allows control over the extruder’s flow percentage without modifying the simulated filament diameter.
-- For printers that support dynamic modification of the rotation distance (e.g., with Klipper using the `SET_ROTATION_DISTANCE` command), the pellet_flow_coefficient can be set to 1, and the rotation distance becomes the reference value for extruded volume.
-
-## Extruder Rotation Distance
-The rotation distance represents the volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is essential for accurately configuring the printer to achieve precise prints.
-
-### Usage
-To use this value during printing, it must be explicitly called within the startup script `START_PRINT`.
-
-## Mixing Stepper Rotation Distance
-The mixing stepper rotation distance is the value that controls how much material is actively fed into the extruder by the feeding mechanism.
-
-### Usage
-This parameter also needs to be explicitly called in the startup script `START_PRINT` to correctly configure the material flow during printing.
-
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 90f35f188a6..5ef97ff3c09 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2853,7 +2853,7 @@ void PrintConfigDef::init_fff_params()
 
     def          = this->add("use_extruder_rotation_volume", coBool);
     def->label   = L("Use extruder rotation volume");
-    def->tooltip = L("Use extruder rotation volume instead of the pellet flow coefficent");
+    def->tooltip = L("Enable extruder rotation volume in material settings");
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(true));
     
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 59c39931b5a..afbd63e2384 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3642,13 +3642,13 @@ void TabFilament::toggle_options()
         toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
         toggle_line("extruder_rotation_volume", is_pellet_printer);
         toggle_line("mixing_stepper_rotation_volume", is_pellet_printer);
+        toggle_line("pellet_flow_coefficient", is_pellet_printer);
 
         bool use_active_pellet_feeding = cfg.opt_bool("use_active_pellet_feeding");
         toggle_line("mixing_stepper_rotation_volume", is_pellet_printer && use_active_pellet_feeding);
 
         bool use_extruder_rotation_volume = cfg.opt_bool("use_extruder_rotation_volume");
         toggle_line("extruder_rotation_volume", is_pellet_printer && use_extruder_rotation_volume);
-        toggle_line("pellet_flow_coefficient", is_pellet_printer && !use_extruder_rotation_volume);
     }
 
     if (m_active_page->title() == L("Setting Overrides"))

From e8515080cca5e5c4dba09c5063b9f61c7ed837cb Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 18:57:38 +0100
Subject: [PATCH 14/59] add doc e fix multi material mode

---
 src/libslic3r/GCode.cpp | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index cf6a89cf33e..2bd0af80bd7 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -6494,6 +6494,14 @@ std::string GCode::set_extruder(unsigned int extruder_id, double print_z, bool b
         gcode += m_writer.set_pressure_advance(m_config.pressure_advance.get_at(extruder_id));
     }
 
+    if (m_config.use_extruder_rotation_volume.value) {
+        gcode += m_writer.add_rotation_volume(extruder_id, m_config.extruder_rotation_volume.get_at(extruder_id));
+        if (m_config.use_active_pellet_feeding.value) {
+            gcode += m_writer.add_rotation_volume(m_config.active_feeder_motor_name.get_at(extruder_id),
+                m_config.mixing_stepper_rotation_volume.get_at(extruder_id));
+        }
+    }
+
     return gcode;
 }
 

From 70aa7b4e10bcf0820f999b312cad4be8c7627abd Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 19:01:18 +0100
Subject: [PATCH 15/59] fix doc reference

---
 src/slic3r/GUI/Tab.cpp | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index afbd63e2384..106e9df1ff5 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3302,9 +3302,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("extruder_rotation_volume", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_flow_coefficient"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("extruder_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume"' "Pellet-modded-printer");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3769,9 +3769,9 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("use_extruder_rotation_volume", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("use_active_pellet_feeding", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_modded_printer"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_extruder_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_active_pellet_feeding"' "Pellet-modded-printer");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");
@@ -4374,7 +4374,7 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
                 optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
-                optgroup->append_single_option_line("active_feeder_motor_name", "pellet-flow-coefficient", extruder_idx);
+                optgroup->append_single_option_line("active_feeder_motor_name"' "Pellet-modded-printer", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 

From 79b21629a6167c0227f596cfd54e10d8fd6f4e1d Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 19:02:12 +0100
Subject: [PATCH 16/59] fix typo

---
 src/slic3r/GUI/Tab.cpp | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 106e9df1ff5..376e2b4f8ee 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3302,9 +3302,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("extruder_rotation_volume"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("mixing_stepper_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("pellet_flow_coefficient", "Pellet-modded-printer");
+        optgroup->append_single_option_line("extruder_rotation_volume", "Pellet-modded-printer");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "Pellet-modded-printer");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3769,9 +3769,9 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("use_extruder_rotation_volume"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("use_active_pellet_feeding"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("pellet_modded_printer", "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_extruder_rotation_volume", "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_active_pellet_feeding", "Pellet-modded-printer");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");
@@ -4374,7 +4374,7 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
                 optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
-                optgroup->append_single_option_line("active_feeder_motor_name"' "Pellet-modded-printer", extruder_idx);
+                optgroup->append_single_option_line("active_feeder_motor_name", "Pellet-modded-printer", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 

From e70e3b712222c7acb8ed190984205ed194f6812b Mon Sep 17 00:00:00 2001
From: GiacomoGuaresi <36533859+GiacomoGuaresi@users.noreply.github.com>
Date: Sat, 14 Dec 2024 14:45:17 +0100
Subject: [PATCH 17/59] Update Pellet-modded-printer.md

---
 doc/Pellet-modded-printer.md | 82 +++++++++++++++++-------------------
 1 file changed, 39 insertions(+), 43 deletions(-)

diff --git a/doc/Pellet-modded-printer.md b/doc/Pellet-modded-printer.md
index 872710dd196..a0844c306de 100644
--- a/doc/Pellet-modded-printer.md
+++ b/doc/Pellet-modded-printer.md
@@ -1,65 +1,61 @@
 # Pellet modded printer
-Le stampanti 3D a pellet, comunemente utilizzate per stampe di grandi dimensioni (solitamente superiori a 1m³), si basano su una tecnologia simile alla stampa FDM. Tuttavia, anziché utilizzare filamenti, queste stampanti impiegano pellet come materiale di stampa.
-L'uso dei pellet comporta una gestione dell'estrusione diversa rispetto alle stampanti a filamento tradizionali, a causa di:
+Pellet 3D printers, commonly used for large prints (usually larger than 1m³), are based on a technology similar to FDM printing. However, instead of using filaments, these printers use pellets as the printing material.
+The use of pellets requires a different extrusion management compared to traditional filament printers, due to:
 
-- La presenza di aria tra i pellet.
-- Dimensioni variabili del particolato a seconda del materiale.
-- Necessità di sistemi di alimentazione attivi.
+- The presence of air between the pellets.
+- Variable particle size depending on the material.
+- Need for active feeding systems.
 
-Questo richiede parametri aggiuntivi per una corretta configurazione dell'estrusione.
+This requires additional parameters for a correct extrusion configuration.
 
 ## pellet flow coefficient
-Il pellet flow coefficient è un parametro che rappresenta la capacità di estrusione dei pellet, influenzata da fattori quali:
+The pellet flow coefficient is a parameter that represents the extrusion capacity of the pellets, influenced by factors such as:
 
-- Forma del pellet.
-- Tipo di materiale.
-- Viscosità del materiale.
+- Shape of the pellet.
+- Type of material.
+- Viscosity of the material.
 
-### Funzionamento
-Questo valore definisce la quantità di materiale estruso per ogni giro del meccanismo di alimentazione. Internamente, il coefficiente viene convertito in un valore equivalente di `filament_diameter` per garantire compatibilità con i calcoli volumetrici standard FDM.
+### Operation
+This value defines the amount of material extruded for each revolution of the feeding mechanism. Internally, the coefficient is converted to an equivalent value of `filament_diameter` to ensure compatibility with standard FDM volumetric calculations.
 
-La formula utilizzata è: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
+The formula used is: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
 
-- Maggiore densità di riempimento → Maggior materiale estruso → Coefficiente di flusso più alto → Simulazione di un filamento con diametro maggiore.
-- Una riduzione del coefficiente del 20% corrisponde a una riduzione lineare del flusso del 20%.
-
-In stampanti dove non è possibile regolare la distanza di rotazione del motore dell'estrusore, il pellet_flow_coefficient permette di controllare la percentuale di flusso modificando il diametro del filamento simulato.
-
->**ATTENZIONE:** Modulare l'estrusione modificando il diametro del filamento virtuale causa tuttavia un errore di lettura della quantità estrusa dalla stampante all'interno del firmware utilizzato.
-Ad esempio su un firmware klipper si avrà una lettura a schermo del flusso di stampa differente da quello realmente in corso.
-utilizzare questo metodo causa anche problemi con il valore di retraction e unretraction, in quanto la conversione col filamneto virtuale altera i valori reali. 
+- Higher infill density → More extruded material → Higher flow coefficient → Simulation of a larger diameter filament.
+- A 20% reduction in the coefficient corresponds to a 20% linear reduction in flow.
 
+In printers where it is not possible to adjust the rotation distance of the extruder motor, the pellet_flow_coefficient allows you to control the flow rate by changing the diameter of the simulated filament.
 
+>**WARNING:** Modulating the extrusion by changing the diameter of the virtual filament causes an error in reading the quantity extruded by the printer within the firmware used.
+For example, on a klipper firmware you will have a different reading of the print flow on the screen than the one actually in progress.
+using this method also causes problems with the retraction and unretraction value, as the conversion with the virtual filament alters the real values.
 
 ## Extruder Rotation Volume
-La extruder rotation volume rappresenta il volume di materiale estruso (in mm³) per ogni giro completo del motore dell'estrusore. Questo parametro offre una maggiore precisione nella configurazione rispetto al pellet flow coefficient, eliminando errori di calcolo dovuti alla simulazione del diametro del filamento virtuale.
-
-### Configurazione tramite Filamento Virtuale con Area di 1 mm²
-Per semplificare ulteriormente il calcolo del volume estruso e sincronizzare i parametri della stampante con i valori di volume nel G-code, è possibile simulare un filamento virtuale con un'area trasversale di 1 mm². In questo modo, i valori di estrusione 𝐸 nel G-code rappresentano direttamente il volume in mm³.
-
-#### Passaggi per l'implementazione
-1. **Impostazione del Pellet Flow Coefficient:** Simulare un filamento con un'area trasversale di 1 mm² impostando il pellet flow coefficent ad 1.
-2. **Configurazione della Extruder Rotation Volume:** Determina quanti mm³ di materiale vengono estrusi per ogni giro completo del motore dell'estrusore. Questo parametro dipende dalla geometria della vite o dell'ingranaggio dell'estrusore e può essere calibrato sperimentalmente.
-Inserisci il valore ottenuto nella configurazione del materiale come extruder rotation volume.
-3. **Imposta il filament_diameter** pari a 1.1284 all'interno del firmware della proprio stampante
+The extruder rotation volume represents the volume of material extruded (in mm³) for each complete revolution of the extruder motor. This parameter offers greater precision in the configuration compared to the pellet flow coefficient, eliminating calculation errors due to the simulation of the virtual filament diameter.
 
-### Vantaggi del Sistema
-- Eliminazione degli errori di conversione: Non è necessario simulare filamenti di diverso diametro, riducendo gli errori.
-- Maggiore precisione: L'utilizzo del volume estruso diretto nel G-code rende la calibrazione più semplice e accurata.
-- Compatibilità dinamica: Con firmware come Klipper, puoi aggiornare i parametri in tempo reale senza dover riscrivere il G-code.
+### Configuration via Virtual Filament with Area of ​​1 mm²
+To further simplify the calculation of the extruded volume and synchronize the printer parameters with the volume values ​​in the G-code, it is possible to simulate a virtual filament with a cross-sectional area of ​​1 mm². In this way, the extrusion values ​​𝐸 in the G-code directly represent the volume in mm³.
 
->**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
+#### Implementation steps
+1. **Setting the Pellet Flow Coefficient:** Simulate a filament with a cross-sectional area of ​​1 mm² by setting the pellet flow coefficent to 1.
+2. **Setting the Extruder Rotation Volume:** Determines how many mm³ of material are extruded for each complete revolution of the extruder motor. This parameter depends on the geometry of the extruder screw or gear and can be calibrated experimentally.
+Enter the obtained value in the material configuration as extruder rotation volume.
+3. **Set the filament_diameter** equal to 1.1284 within the firmware of your printer
 
+### System Benefits
+- Elimination of conversion errors: It is not necessary to simulate filaments of different diameters, reducing errors.
+- Greater precision: Using the direct extruded volume in the G-code makes calibration easier and more accurate.
+- Dynamic Compatibility: With firmware like Klipper, you can update parameters in real time without having to rewrite the G-code.
 
+>**ATTENTION:** This feature is currently only supported by printers with Klipper firmware. Make sure to check compatibility before proceeding with the configuration.
 
 ## Mixing Stepper Rotation Volume
-La mixing stepper rotation volume indica il volume di materiale (in mm³) immesso attivamente nell'estrusore tramite un motore dedicato.
+The mixing stepper rotation volume indicates the volume of material (in mm³) actively fed into the extruder via a dedicated motor.
 
-### Utilizzo
-Per utilizzare questa funzionalità, è necessario:
+### Usage
+To use this feature, you need to:
 
-- Abilitare l'opzione nelle impostazioni della stampante.
-- Definire il nome identificativo del motore che gestisce il feeding nelle impostazioni dell'estrusore.
-- Configurare il valore di mixing_stepper_rotation_volume nelle impostazioni del materiale.
+- Enable the option in the printer settings.
+- Define the identifying name of the motor that manages the feeding in the extruder settings.
+- Configure the value of mixing_stepper_rotation_volume in the material settings.
 
->**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
\ No newline at end of file
+>**ATTENTION:** This feature is currently only supported by printers with Klipper firmware. Make sure to check compatibility before proceeding with the configuration.

From 1a121364f8bc6c36637d8d9efa2b89c8258f68a6 Mon Sep 17 00:00:00 2001
From: davi3012 <72559875+davi3012@users.noreply.github.com>
Date: Mon, 16 Dec 2024 17:22:02 +0100
Subject: [PATCH 18/59] upload artifact to gingeradditive/OrcaSlicer

---
 .github/workflows/build_orca.yml | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index ae855633d76..882abcb6470 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -138,7 +138,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
           asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
@@ -207,7 +207,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
           asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
@@ -218,7 +218,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
           asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
@@ -285,7 +285,7 @@ jobs:
           ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
           asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
@@ -296,7 +296,7 @@ jobs:
         if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
           asset_name: orca_custom_preset_tests.zip

From 9a537f5a6f3b814c55e7019bf9f81fde5cbdd20c Mon Sep 17 00:00:00 2001
From: davi3012 <72559875+davi3012@users.noreply.github.com>
Date: Mon, 16 Dec 2024 17:25:17 +0100
Subject: [PATCH 19/59] change wiki to gingeradditive

---
 .github/workflows/publish_docs_to_wiki.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.github/workflows/publish_docs_to_wiki.yml b/.github/workflows/publish_docs_to_wiki.yml
index 36ceb8e08c0..24361fee648 100644
--- a/.github/workflows/publish_docs_to_wiki.yml
+++ b/.github/workflows/publish_docs_to_wiki.yml
@@ -34,7 +34,7 @@ jobs:
         run: |
           git config --global user.name "$USER_NAME"
           git config --global user.email "$USER_NAME"@users.noreply.github.com
-          git clone https://"$USER_TOKEN"@github.com/SoftFever/"$REPOSITORY_NAME".wiki.git tmp_wiki
+          git clone https://"$USER_TOKEN"@github.com/gingeradditive/"$REPOSITORY_NAME".wiki.git tmp_wiki
       # 4. Synchronize differences between `doc` & `tmp_wiki`
       # 5. Push new Wiki content
       - name: Push main repo content to wiki

From 1c606c4e2caacb6e52c0b9ffa54f88f411b11244 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 17:11:03 +0100
Subject: [PATCH 20/59] disable not windows build for Ginger orca fork

---
 .github/workflows/build_all.yml | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml
index f71148e6ede..fffc016f09d 100644
--- a/.github/workflows/build_all.yml
+++ b/.github/workflows/build_all.yml
@@ -47,13 +47,13 @@ jobs:
       fail-fast: false
       matrix:
         include:
-          - os: ubuntu-20.04
-          - os: ubuntu-24.04
+          # - os: ubuntu-20.04
+          # - os: ubuntu-24.04
           - os: windows-latest
-          - os: macos-14
-            arch: x86_64
-          - os: macos-14
-            arch: arm64
+          # - os: macos-14
+          #   arch: x86_64
+          # - os: macos-14
+          #   arch: arm64
     uses: ./.github/workflows/build_check_cache.yml
     with:
       os: ${{ matrix.os }}
@@ -70,7 +70,7 @@ jobs:
     # maybe i'm too dumb and fucked up to do CI. OH WELL :D -ppd
     - name: "Remove unneeded stuff to free disk space"
       run:
-        sudo rm -rf /usr/share/dotnet /opt/ghc "/usr/local/share/boost" "$AGENT_TOOLSDIRECTORY"
+        rm -rf /usr/share/dotnet /opt/ghc "/usr/local/share/boost" "$AGENT_TOOLSDIRECTORY"
     - uses: actions/checkout@v4
     - uses: flatpak/flatpak-github-actions/flatpak-builder@v6
       with:

From dc820a03060ed7b1f90b7e4e339edf175a951c5a Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 18:10:03 +0100
Subject: [PATCH 21/59] disable deploy steps

---
 .github/workflows/build_orca.yml | 108 +++++++++++++++----------------
 1 file changed, 54 insertions(+), 54 deletions(-)

diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index 882abcb6470..70e2170cec1 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -134,16 +134,16 @@ jobs:
           name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}
           path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
 
-      - name: Deploy Mac release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+      # - name: Deploy Mac release
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
+      #     asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
 
 # Windows
       - name: setup MSVC
@@ -203,27 +203,27 @@ jobs:
           name: PDB
           path: ${{ github.workspace }}/build/src/Release/Debug_PDB_${{ env.ver }}_for_developers_only.7z
 
-      - name: Deploy Windows release portable
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_content_type: application/x-zip-compressed
-          max_releases: 1
-
-      - name: Deploy Windows release installer
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
+      # - name: Deploy Windows release portable
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
+      #     asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
+      #     asset_content_type: application/x-zip-compressed
+      #     max_releases: 1
+
+      # - name: Deploy Windows release installer
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
+      #     asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
+      #     asset_content_type: application/x-msdownload
+      #     max_releases: 1
 
 # Ubuntu
       - name: Install dependencies
@@ -279,26 +279,26 @@ jobs:
           name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
           path: './build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
 
-      - name: Deploy Ubuntu release
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
-        env:
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-
-      - name: Deploy orca_custom_preset_tests
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
-          asset_name: orca_custom_preset_tests.zip
-          asset_content_type: application/octet-stream
-          max_releases: 1
+      # - name: Deploy Ubuntu release
+      #   if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
+      #   env:
+      #     ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
+      #     asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+
+      # - name: Deploy orca_custom_preset_tests
+      #   if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
+      #     asset_name: orca_custom_preset_tests.zip
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1

From 74ccafdb14d370bc5ba0dd28430cbf0d18454bb6 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sun, 1 Dec 2024 11:03:33 +0100
Subject: [PATCH 22/59] feat: updated BBL profiles to 01.10.01.50

---
 resources/profiles/BBL/cli_config.json        |  60 +++++---
 .../Bambu ABS @BBL A1 0.2 nozzle.json         |   6 +
 .../BBL/filament/Bambu ABS @BBL A1.json       |   6 +
 .../Bambu ABS @BBL X1C 0.2 nozzle.json        |   6 +
 .../Bambu ABS @BBL X1C 0.8 nozzle.json        |   6 +
 .../BBL/filament/Bambu ABS @BBL X1C.json      |   6 +
 .../BBL/filament/Bambu ABS @base.json         |   7 +-
 .../BBL/filament/Bambu ABS-GF @BBL A1.json    |   6 +
 .../BBL/filament/Bambu ABS-GF @BBL P1P.json   |   6 +
 .../BBL/filament/Bambu ABS-GF @BBL X1C.json   |   6 +
 .../BBL/filament/Bambu ABS-GF @base.json      |   7 +-
 .../Bambu ASA @BBL A1 0.2 nozzle.json         |   6 +
 .../Bambu ASA @BBL A1 0.4 nozzle.json         |   6 +
 .../Bambu ASA @BBL A1 0.6 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1 0.2 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1 0.6 nozzle.json         |   6 +
 .../Bambu ASA @BBL X1C 0.2 nozzle.json        |   6 +
 .../Bambu ASA @BBL X1C 0.4 nozzle.json        |   6 +
 .../BBL/filament/Bambu ASA @BBL X1C.json      |   6 +
 .../BBL/filament/Bambu ASA @base.json         |   1 +
 .../BBL/filament/Bambu ASA-Aero @base.json    |   7 +-
 .../Bambu ASA-CF @BBL A1 0.6 nozzle.json      |  12 ++
 .../BBL/filament/Bambu ASA-CF @BBL A1.json    |  11 ++
 .../Bambu ASA-CF @BBL P1P 0.6 nozzle.json     |  12 ++
 .../BBL/filament/Bambu ASA-CF @BBL P1P.json   |  11 ++
 .../Bambu ASA-CF @BBL X1C 0.6 nozzle.json     |  18 +++
 .../BBL/filament/Bambu ASA-CF @BBL X1C.json   |  14 ++
 .../BBL/filament/Bambu ASA-CF @base.json      |  44 ++++++
 .../BBL/filament/Bambu PA-CF @base.json       |   1 +
 .../BBL/filament/Bambu PA6-CF @base.json      |   1 +
 .../BBL/filament/Bambu PA6-GF @base.json      |   1 +
 .../BBL/filament/Bambu PAHT-CF @base.json     |  31 +++--
 .../BBL/filament/Bambu PET-CF @base.json      |   7 +
 .../Bambu PETG Basic @BBL A1M 0.2 nozzle.json |   6 +
 .../Bambu PETG Basic @BBL A1M 0.4 nozzle.json |   6 +
 .../Bambu PETG Basic @BBL A1M 0.8 nozzle.json |   6 +
 .../BBL/filament/Bambu PETG Basic @base.json  |   1 +
 .../Bambu PETG HF @BBL A1 0.2 nozzle.json     |   6 +
 .../Bambu PETG HF @BBL A1 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PETG HF @BBL A1.json   |   6 +
 .../Bambu PETG HF @BBL A1M 0.2 nozzle.json    |   6 +
 .../Bambu PETG HF @BBL A1M 0.8 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG HF @BBL A1M.json  |   6 +
 .../Bambu PETG HF @BBL X1C 0.2 nozzle.json    |   6 +
 .../Bambu PETG HF @BBL X1C 0.8 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG HF @BBL X1C.json  |   6 +
 ...u PETG Translucent @BBL A1 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL A1.json       |   6 +
 ... PETG Translucent @BBL A1M 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL A1M.json      |   6 +
 ... PETG Translucent @BBL X1C 0.8 nozzle.json |   6 +
 .../Bambu PETG Translucent @BBL X1C.json      |   6 +
 .../Bambu PETG Translucent @base.json         |   1 +
 .../Bambu PETG-CF @BBL A1 0.4 nozzle.json     |   6 +
 .../Bambu PETG-CF @BBL A1 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PETG-CF @BBL A1M.json  |   6 +
 .../Bambu PETG-CF @BBL X1C 0.4 nozzle.json    |   6 +
 .../BBL/filament/Bambu PETG-CF @BBL X1C.json  |   6 +
 .../BBL/filament/Bambu PLA Aero @base.json    |  14 +-
 .../Bambu PLA Basic @BBL A1 0.2 nozzle.json   |   6 +
 .../BBL/filament/Bambu PLA Basic @BBL A1.json |   6 +
 .../Bambu PLA Basic @BBL A1M 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Basic @BBL A1M.json    |   6 +
 .../BBL/filament/Bambu PLA Basic @base.json   |  13 ++
 .../Bambu PLA Galaxy @BBL A1 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Galaxy @BBL A1.json    |   6 +
 .../Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL A1M.json   |   6 +
 .../Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL P1P.json   |   6 +
 .../Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json |   6 +
 .../Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json |   6 +
 .../filament/Bambu PLA Galaxy @BBL X1C.json   |   6 +
 .../Bambu PLA Glow @BBL A1 0.2 nozzle.json    |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL A1.json  |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL P1P.json |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1.json  |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1C.json |   6 +
 .../BBL/filament/Bambu PLA Glow @BBL X1E.json |   6 +
 .../filament/Bambu PLA Marble @BBL A1.json    |   6 +
 .../filament/Bambu PLA Marble @BBL A1M.json   |   6 +
 .../filament/Bambu PLA Marble @BBL X1.json    |   6 +
 .../filament/Bambu PLA Marble @BBL X1C.json   |   6 +
 .../Bambu PLA Matte @BBL A1 0.2 nozzle.json   |   6 +
 .../BBL/filament/Bambu PLA Matte @BBL A1.json |   6 +
 .../Bambu PLA Matte @BBL A1M 0.2 nozzle.json  |   6 +
 .../filament/Bambu PLA Matte @BBL A1M.json    |   6 +
 .../BBL/filament/Bambu PLA Matte @BBL X1.json |   6 +
 .../Bambu PLA Matte @BBL X1C 0.2 nozzle.json  |   6 +
 .../Bambu PLA Matte @BBL X1C 0.8 nozzle.json  |   6 +
 .../filament/Bambu PLA Matte @BBL X1C.json    |   6 +
 .../BBL/filament/Bambu PLA Matte @base.json   |  12 ++
 .../BBL/filament/Bambu PLA Metal @base.json   |   4 +
 .../BBL/filament/Bambu PLA Silk @base.json    |  13 ++
 .../BBL/filament/Bambu PLA Tough @base.json   |   3 +
 .../Bambu PLA-CF @BBL A1 0.8 nozzle.json      |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL A1.json    |   6 +
 .../Bambu PLA-CF @BBL A1M 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL A1M.json   |   6 +
 .../Bambu PLA-CF @BBL X1C 0.8 nozzle.json     |   6 +
 .../BBL/filament/Bambu PLA-CF @BBL X1C.json   |   6 +
 .../BBL/filament/Bambu PLA-CF @base.json      |  12 +-
 .../BBL/filament/Bambu PPS-CF @base.json      |   4 +-
 .../BBL/filament/Bambu PVA @base.json         |   1 +
 .../Bambu Support For PA PET @base.json       |  21 +--
 .../filament/Bambu Support For PLA @base.json |   4 +
 ...pport For PLA-PETG @BBL A1 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL A1.json   |   6 +
 ...port For PLA-PETG @BBL A1M 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL A1M.json  |   6 +
 ...port For PLA-PETG @BBL P1P 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL P1P.json  |   6 +
 ...port For PLA-PETG @BBL X1C 0.2 nozzle.json |   6 +
 .../Bambu Support For PLA-PETG @BBL X1C.json  |   6 +
 .../Bambu Support For PLA-PETG @base.json     |   7 +
 .../BBL/filament/Bambu Support G @base.json   |  24 ++--
 .../BBL/filament/Bambu Support W @base.json   |   4 +
 .../Bambu Support for ABS @BBL A1.json        |   6 +
 .../Bambu Support for ABS @BBL X1C.json       |   6 +
 .../filament/Bambu Support for ABS @base.json |   4 +
 .../BBL/filament/Bambu TPU 95A @base.json     |  15 +-
 .../BBL/filament/Bambu TPU 95A HF @base.json  |   1 +
 .../filament/Bambu TPU for AMS @BBL A1.json   |  13 ++
 .../filament/Bambu TPU for AMS @BBL A1M.json  |  13 ++
 .../filament/Bambu TPU for AMS @BBL P1P.json  |  16 +++
 .../filament/Bambu TPU for AMS @BBL X1C.json  |  19 +++
 .../BBL/filament/Bambu TPU for AMS @base.json |  54 ++++++++
 .../filament/Fiberon PA12-CF @BBL X1C.json    |  16 +++
 .../BBL/filament/Fiberon PA12-CF @base.json   |  71 ++++++++++
 .../BBL/filament/Fiberon PA6-CF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PA6-CF @base.json    |  68 +++++++++
 .../BBL/filament/Fiberon PA6-GF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PA6-GF @base.json    |  71 ++++++++++
 .../filament/Fiberon PA612-CF @BBL X1C.json   |  16 +++
 .../BBL/filament/Fiberon PA612-CF @base.json  |  41 ++++++
 .../BBL/filament/Fiberon PET-CF @BBL X1C.json |  16 +++
 .../BBL/filament/Fiberon PET-CF @base.json    |  89 ++++++++++++
 .../filament/Fiberon PETG-ESD @BBL X1C.json   |  19 +++
 .../BBL/filament/Fiberon PETG-ESD @base.json  |  77 +++++++++++
 .../filament/Fiberon PETG-rCF @BBL X1C.json   |  16 +++
 .../BBL/filament/Fiberon PETG-rCF @base.json  |  80 +++++++++++
 .../BBL/filament/Generic ABS @base.json       |   1 +
 .../BBL/filament/Generic ASA @base.json       |   1 +
 .../BBL/filament/Generic EVA @base.json       |   3 -
 .../profiles/BBL/filament/Generic PA-CF.json  |   1 +
 .../profiles/BBL/filament/Generic PA.json     |   1 +
 .../BBL/filament/Generic PC @base.json        |   7 +-
 .../Generic PETG HF @BBL A1 0.2 nozzle.json   |  14 ++
 .../BBL/filament/Generic PETG HF @BBL A1.json |  13 ++
 .../Generic PETG HF @BBL A1M 0.2 nozzle.json  |  11 ++
 .../filament/Generic PETG HF @BBL A1M.json    |  13 ++
 .../Generic PETG HF @BBL P1P 0.2 nozzle.json  |  14 ++
 .../filament/Generic PETG HF @BBL P1P.json    |  13 ++
 .../Generic PETG HF @BBL X1C 0.2 nozzle.json  |  17 +++
 .../filament/Generic PETG HF @BBL X1C.json    |  22 +++
 .../BBL/filament/Generic PETG HF @base.json   |  71 ++++++++++
 .../BBL/filament/Generic PETG-CF @base.json   |   6 -
 .../BBL/filament/Generic PLA @base.json       |   1 +
 .../BBL/filament/Generic PLA Silk @base.json  |   7 +
 .../BBL/filament/Generic PLA-CF @base.json    |   6 +
 .../BBL/filament/Generic PPA-CF @base.json    |   4 +-
 .../BBL/filament/Generic PPS-CF @base.json    |  10 +-
 .../BBL/filament/Generic PVA @base.json       |   1 +
 .../filament/Generic TPU for AMS @BBL A1.json |  28 ++++
 .../Generic TPU for AMS @BBL A1M.json         |  28 ++++
 .../Generic TPU for AMS @BBL P1P.json         |  31 +++++
 .../Generic TPU for AMS @BBL X1C.json         |  34 +++++
 .../filament/Generic TPU for AMS @base.json   |  30 ++++
 .../profiles/BBL/filament/Generic TPU.json    |   1 +
 .../P1P/Bambu ABS @BBL P1P 0.2 nozzle.json    |   6 +
 .../BBL/filament/P1P/Bambu ABS @BBL P1P.json  |   6 +
 .../Bambu PETG-CF @BBL P1P 0.4 nozzle.json    |   6 +
 .../filament/P1P/Bambu PETG-CF @BBL P1P.json  |   6 +
 .../P1P/Bambu PLA Marble @BBL P1P.json        |   6 +
 .../Bambu PLA Matte @BBL P1P 0.2 nozzle.json  |   6 +
 .../P1P/Bambu PLA Matte @BBL P1P.json         |   6 +
 .../P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json |   6 +
 .../filament/P1P/Bambu PLA-CF @BBL P1P.json   |   6 +
 .../BBL/filament/P1P/Generic PA @BBL P1P.json |   1 +
 .../filament/P1P/Generic PA-CF @BBL P1P.json  |   1 +
 .../filament/P1P/Generic TPU @BBL P1P.json    |   1 +
 .../BBL/filament/fdm_filament_abs.json        |   6 +
 .../BBL/filament/fdm_filament_asa.json        |   6 +
 .../BBL/filament/fdm_filament_bvoh.json       |   6 +
 .../BBL/filament/fdm_filament_common.json     |  21 +++
 .../BBL/filament/fdm_filament_eva.json        |   6 +
 .../BBL/filament/fdm_filament_hips.json       |   6 +
 .../BBL/filament/fdm_filament_pa.json         |   6 +
 .../BBL/filament/fdm_filament_pc.json         |   6 +
 .../BBL/filament/fdm_filament_pctg.json       | 130 +++++++++---------
 .../BBL/filament/fdm_filament_pe.json         |   6 +
 .../BBL/filament/fdm_filament_pet.json        |   6 +
 .../BBL/filament/fdm_filament_pha.json        |   6 +
 .../BBL/filament/fdm_filament_pla.json        |  84 +++++------
 .../BBL/filament/fdm_filament_pp.json         |   6 +
 .../BBL/filament/fdm_filament_ppa.json        |   6 +
 .../BBL/filament/fdm_filament_pps.json        |   6 +
 .../BBL/filament/fdm_filament_pva.json        |   6 +
 .../BBL/filament/fdm_filament_tpu.json        |   6 +
 .../BBL/machine/Bambu Lab A1 0.4 nozzle.json  |   3 +-
 .../machine/Bambu Lab A1 mini 0.4 nozzle.json |   3 +-
 .../BBL/machine/Bambu Lab P1P 0.4 nozzle.json |   2 +-
 .../BBL/machine/Bambu Lab P1S 0.4 nozzle.json |   1 -
 .../BBL/machine/Bambu Lab X1 0.2 nozzle.json  |   2 +-
 .../BBL/machine/Bambu Lab X1 0.4 nozzle.json  |   3 +-
 .../BBL/machine/Bambu Lab X1 0.6 nozzle.json  |   2 +-
 .../BBL/machine/Bambu Lab X1 0.8 nozzle.json  |   2 +-
 .../Bambu Lab X1 Carbon 0.2 nozzle.json       |   2 +-
 .../Bambu Lab X1 Carbon 0.4 nozzle.json       |   3 +-
 .../Bambu Lab X1 Carbon 0.6 nozzle.json       |   2 +-
 .../Bambu Lab X1 Carbon 0.8 nozzle.json       |   2 +-
 .../BBL/machine/Bambu Lab X1E 0.4 nozzle.json |   2 +-
 .../BBL/machine/fdm_machine_common.json       |   7 +-
 .../0.10mm Standard @BBL P1P 0.2 nozzle.json  |   3 +-
 .../fdm_process_bbl_0.06_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.08_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.10_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.12_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.14_nozzle_0.2.json      |   1 +
 .../fdm_process_bbl_0.18_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.24_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.24_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.30_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.32_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.36_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.40_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.42_nozzle_0.6.json      |   1 +
 .../fdm_process_bbl_0.48_nozzle_0.8.json      |   1 +
 .../fdm_process_bbl_0.56_nozzle_0.8.json      |   1 +
 .../BBL/process/fdm_process_bbl_common.json   |   1 +
 .../BBL/process/fdm_process_common.json       |   4 +-
 231 files changed, 2256 insertions(+), 220 deletions(-)
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Bambu ASA-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Bambu TPU for AMS @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA12-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA6-GF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PA612-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PET-CF @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Generic PETG HF @base.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json
 create mode 100644 resources/profiles/BBL/filament/Generic TPU for AMS @base.json

diff --git a/resources/profiles/BBL/cli_config.json b/resources/profiles/BBL/cli_config.json
index 2bd68647c91..7c75b738d83 100644
--- a/resources/profiles/BBL/cli_config.json
+++ b/resources/profiles/BBL/cli_config.json
@@ -75,80 +75,100 @@
 		"Bambu Lab X1": {
 			"downward_check": {
 				"Bambu Lab X1 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab X1 Carbon": {
 			"downward_check": {
 				"Bambu Lab X1 Carbon 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab X1E": {
 			"downward_check": {
 				"Bambu Lab X1E 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab X1E 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab X1E 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab X1E 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab P1P": {
 			"downward_check": {
 				"Bambu Lab P1P 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab P1P 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab P1P 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab P1P 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		},
 		"Bambu Lab P1S": {
 			"downward_check": {
 				"Bambu Lab P1S 0.2 nozzle": [
-					"Bambu Lab A1 mini 0.2 nozzle"
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab A1 0.2 nozzle"
 				],
 				"Bambu Lab P1S 0.4 nozzle": [
-					"Bambu Lab A1 mini 0.4 nozzle"
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab A1 0.4 nozzle"
 				],
 				"Bambu Lab P1S 0.6 nozzle": [
-					"Bambu Lab A1 mini 0.6 nozzle"
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab A1 0.6 nozzle"
 				],
 				"Bambu Lab P1S 0.8 nozzle": [
-					"Bambu Lab A1 mini 0.8 nozzle"
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab A1 0.8 nozzle"
 				]
 			}
 		}
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json
index 413d8ce7958..3282b698e73 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json
index f85009c07bb..6d34d11f229 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json
index f21efe7f800..ae2331a947d 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json
index 6145a910b61..fa8c04cf9fb 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "260"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json
index 88ad1a408f9..cef6534784d 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json
index a185e7cf80c..f5d8680b063 100644
--- a/resources/profiles/BBL/filament/Bambu ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS @base.json	
@@ -5,12 +5,13 @@
     "from": "system",
     "filament_id": "GFB00",
     "instantiation": "false",
-    "filament_flow_ratio": [
-        "0.95"
-    ],
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_cost": [
         "24.99"
     ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json
index ff5f41cae78..aee4e52a016 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle",
         "Bambu Lab A1 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json
index 37acd12522d..8a51aedb7e7 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.8 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json
index 89916b17b3a..173f63007d7 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSB50_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json
index 777cf850801..a67aa45465b 100644
--- a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB50",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "12"
     ],
@@ -17,15 +18,15 @@
     "filament_density": [
         "1.08"
     ],
-    "filament_type": [
-        "ABS-GF"
-    ],
     "filament_flow_ratio": [
         "0.95"
     ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "filament_type": [
+        "ABS-GF"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json
index e67d7d90e00..52d1c45a6b0 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_10",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json
index 9c92e7653b7..97017c4fa3a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json	
@@ -8,6 +8,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json
index 916abbfbe39..8aa9d6f38b8 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.6 nozzle",
         "Bambu Lab A1 0.8 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json
index 90b80ac8dc4..954cdc9ff2c 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_03",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json
index 5e6a6788c3f..144df72be9e 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_speed": [
         "0.4"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json
index 1253bff71f7..5264f9d6de2 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSB01_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab P1S 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json
index b3c53e095c3..6a8a891f257 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json	
@@ -8,6 +8,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab P1S 0.4 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json
index 4c9c47f1a3c..db44041c73a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json	
@@ -8,6 +8,12 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json
index 7ae30500d90..6850e938f65 100644
--- a/resources/profiles/BBL/filament/Bambu ASA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB01",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "35"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json
index f469aeebc67..4cfe7de309a 100644
--- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB02",
     "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
     "fan_cooling_layer_time": [
         "30"
     ],
@@ -26,9 +27,6 @@
     "filament_max_volumetric_speed": [
         "12"
     ],
-    "filament_retract_before_wipe": [
-        "nil"
-    ],
     "filament_retraction_length": [
         "1.5"
     ],
@@ -58,5 +56,8 @@
     ],
     "slow_down_layer_time": [
         "5"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json
new file mode 100644
index 00000000000..442f2b6230e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL A1 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_05",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json
new file mode 100644
index 00000000000..70c164accf2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL A1",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_04",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json
new file mode 100644
index 00000000000..0d038bb515e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_03",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json
new file mode 100644
index 00000000000..7c19ff98065
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL P1P",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json
new file mode 100644
index 00000000000..44c110b6353
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json
new file mode 100644
index 00000000000..a65d70b6f39
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @BBL X1C",
+    "inherits": "Bambu ASA-CF @base",
+    "from": "system",
+    "setting_id": "GFSB51_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab X1E 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json
new file mode 100644
index 00000000000..b280a21659b
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA-CF @base",
+    "inherits": "fdm_filament_asa",
+    "from": "system",
+    "filament_id": "GFB51",
+    "instantiation": "false",
+    "fan_max_speed": [
+        "25"
+    ],
+    "filament_cost": [
+        "36.99"
+    ],
+    "filament_density": [
+        "1.02"
+    ],
+    "filament_flow_ratio": [
+        "0.9"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "filament_type": [
+        "ASA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "275"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "275"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "temperature_vitrification": [
+        "108"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json
index 2788ee1bdce..f278ca567b9 100644
--- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN03",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_cost": [
         "84.99"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json
index 190e61093e9..7df1f06e4ac 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN05",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json
index 24a6fa15b06..e2246b0cab5 100644
--- a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFN08",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json
index 0f5dcfb745c..17ef39575f0 100644
--- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json	
@@ -5,20 +5,18 @@
     "from": "system",
     "filament_id": "GFN04",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
     "fan_max_speed": [
         "30"
     ],
     "fan_min_speed": [
         "10"
     ],
-    "fan_cooling_layer_time": [
-        "5"
-    ],
-    "full_fan_speed_layer": [
-        "2"
-    ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "94.99"
     ],
     "filament_density": [
         "1.06"
@@ -26,17 +24,20 @@
     "filament_flow_ratio": [
         "0.96"
     ],
-    "overhang_fan_threshold": [
-        "0%"
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
     ],
     "overhang_fan_speed": [
         "40"
     ],
-    "filament_type": [
-        "PA-CF"
-    ],
-    "filament_cost": [
-        "94.99"
+    "overhang_fan_threshold": [
+        "0%"
     ],
     "temperature_vitrification": [
         "180"
diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json
index 9cfc605c328..fd0c71af6c8 100644
--- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFT01",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "cool_plate_temp": [
         "0"
     ],
@@ -68,6 +69,12 @@
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
     "slow_down_layer_time": [
         "2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json
index 6553473d1bd..97d7a7cd1a1 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json	
@@ -8,6 +8,12 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.2 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json
index 837e060fe54..58b35890a91 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json	
@@ -8,9 +8,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.4 nozzle"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json
index e3d66863c0e..73cc2e96331 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json	
@@ -8,9 +8,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "nil"
+    ],
     "filament_max_volumetric_speed": [
         "12"
     ],
+    "filament_retraction_distances_when_cut": [
+        "nil"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 mini 0.6 nozzle",
         "Bambu Lab A1 mini 0.8 nozzle"
diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json
index b187cac1922..801cab4aae4 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFG00",
     "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json
index 7335bcaffe0..23c674f620c 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json
index a4db6b85bd2..6c52c255e8a 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json
index 2a9f8a264c1..5b972849de5 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json
index 17106138f6c..bad6f79415b 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json
index 2d3ea73731f..df1eab07543 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json
index f6d16e8d475..d3ebff57e84 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json	
@@ -17,9 +17,15 @@
     "filament_flow_ratio": [
         "0.94"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "240"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json
index b0d8d373744..72f3a64f357 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json
index 44193c3c433..145f98d1ff6 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json
index c02f8e26099..d31822c6d73 100644
--- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json
index fc6643dfc6c..d79bd3b578a 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json
index fd65b8f27af..4cf239e1447 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_05",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json
index 5785e725ca1..864884dad1e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json
index fc1271284b0..ad1111fdaa4 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json
index 39a4bfb3f8c..eafc44f3b5e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.2"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json
index 386ef5eab80..830dab5dea0 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSG01_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "filament_retraction_length": [
         "0.3"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json
index 174052635cd..f2569d5f399 100644
--- a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFG01",
     "instantiation": "false",
+    "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json
index 47f54f981dd..4ad1c374178 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json
index ad7db31ffbd..edf85380a3e 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json
index 6c7b97ce7b6..7852889288c 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSG50_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "9"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "textured_plate_temp_initial_layer": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json
index d0ea93c38c7..41f1bc333e0 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json
index 8d0e7ce354e..42e23219c51 100644
--- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json
index 95b26c27968..484a3972702 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA11",
     "instantiation": "false",
+    "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
     "fan_min_speed": [
         "30"
     ],
@@ -26,12 +27,21 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "260"
+    "filament_scarf_seam_type": [
+        "none"
     ],
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json
index df3036b34ce..b26ee48d43a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json
index 4e3b6cc6dc4..fbb03698126 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json
index 49b44fa936f..f54a464e62f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json
index 17858789174..23e418b7e03 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json
index b975be47dcc..45a5b357901 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json	
@@ -20,6 +20,19 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "10%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
+    "compatible_printers": [],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json
index ae4fbb27473..bf0d7a524f0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json
index d3cb1dfc851..094a7c31ac0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json
index b70fded8638..3f59d61d76d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json
index c73ef89d00d..1330b7ac74c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json
index b9e85c1d8c7..636518b50e0 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json
index e461af9d498..2ebe013d9a3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json
index 7bb8e8f94b8..0d387ff78c1 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA15_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json
index 43457c192d2..bae2c44be99 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA15_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json
index d95ffa6a6d9..1a8e719f09a 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA15_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json
index 5eae9e1e1ac..8763639cdd3 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json
index b4949148dda..4fa331e1b97 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json
index e162316fd30..198c2bf29ab 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json
index 6f91b4f7faa..c4a3ca7738e 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_08",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json
index 5d0c2705a77..abcc9763a40 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json
index 30c339132c9..1bfc1ca5cda 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA12_04",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab X1E 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json
index c4eaac7e47e..1452831345c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json
index ebb955bdf04..c53cde99c5c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json	
@@ -14,6 +14,12 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json
index 20b0a0969e4..a56c168547c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA07_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json
index 29592f9b4fd..0b9a41dce6f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSA07_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json
index 55bcf1e9b0f..a66550291ac 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json
index 7b877ed611c..95e6db95224 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json
index eb0f819f533..477f128d1c7 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json
index 65403831cbd..8b8d54f422b 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json
index c0b3df55551..b223ece7144 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA05",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json
index 04b51f81041..25a2125b1cb 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json
index fc0962cd0e2..a4f376d9bba 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json
index 0987393ec65..d1f1969c26d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 Carbon 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json
index 36156e0af82..1550142d46c 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json	
@@ -17,6 +17,18 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height":[
+        "5%"
+    ],
+    "filament_scarf_gap":[
+        "0%"
+    ],
+    "filament_scarf_length":[
+        "10"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json
index 77c81e4fb04..986613c9aea 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA02",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [
         "29.99"
     ],
@@ -17,6 +18,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json
index 642f9396109..e9e66c97eb9 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFA05",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_cost": [
         "29.99"
     ],
@@ -17,12 +18,24 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_height": [
+        "5%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
     "nozzle_temperature": [
         "230"
     ],
     "nozzle_temperature_initial_layer": [
         "230"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json
index 24168d6f136..6268e9d97e2 100644
--- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json	
@@ -17,6 +17,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json
index 48fdfde08fd..7b86bec58f7 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json
index f69ce39db1e..f27abc0df2f 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json
index d22d4de449b..af10570429d 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json
index b976f74eb7d..06b3e679e27 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json
index 204237570ba..d7a632e1bdf 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA50_02",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "230"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json
index 2e4aa2e93ca..6ec63c6a401 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json	
@@ -5,9 +5,15 @@
     "from": "system",
     "setting_id": "GFSA50_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "nozzle_temperature": [
         "230"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json
index 3f356ae8655..ac88cc70983 100644
--- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json	
@@ -29,15 +29,21 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "250"
-    ],
     "nozzle_temperature_range_low": [
         "210"
     ],
+    "nozzle_temperature_range_high": [
+        "250"
+    ],
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "50"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "50"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json
index 391e986bf72..cef49fe98d2 100644
--- a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFT02",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "30"
     ],
@@ -23,9 +24,6 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
-    "nozzle_temperature_range_high": [
-        "350"
-    ],
     "nozzle_temperature_range_low": [
         "310"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu PVA @base.json b/resources/profiles/BBL/filament/Bambu PVA @base.json
index a236f83bd6e..f9396292cfa 100644
--- a/resources/profiles/BBL/filament/Bambu PVA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu PVA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS04",
     "instantiation": "false",
+    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
     "filament_cost": [
         "79.98"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json
index 7af6db4c149..3166617d721 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json	
@@ -5,11 +5,12 @@
     "from": "system",
     "filament_id": "GFS03",
     "instantiation": "false",
-    "required_nozzle_HRC": [
-        "3"
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
     ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "34.99"
     ],
     "filament_density": [
         "1.22"
@@ -17,17 +18,17 @@
     "filament_is_support": [
         "1"
     ],
-    "nozzle_temperature_initial_layer": [
-        "280"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "280"
     ],
-    "fan_cooling_layer_time": [
-        "10"
+    "nozzle_temperature_initial_layer": [
+        "280"
     ],
-    "filament_cost": [
-        "34.99"
+    "required_nozzle_HRC": [
+        "3"
     ],
     "slow_down_layer_time": [
         "6"
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json
index 75179145e6c..7868741daea 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS02",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,6 +24,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json
index 52f12d83edf..db0f6ce2f10 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json
index cc081f215f7..e0cb4210a78 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json
index e896919e4ea..90920ebe8cb 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json
index ad2bc888ac9..fcbd1bb645e 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json
index 0352dc891a5..5f71f87c3fa 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json
index 1f47df1ec9c..3e3db66e03b 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "65"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json
index fa58a048a76..793ddf06ee6 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "eng_plate_temp_initial_layer": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "0.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.2 nozzle",
         "Bambu Lab X1 0.2 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json
index 8672833ea78..3f210fc5792 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json	
@@ -11,6 +11,12 @@
     "eng_plate_temp_initial_layer": [
         "60"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1S 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json
index 4e628358628..6eae3684bf6 100644
--- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS05",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "fan_cooling_layer_time": [
         "80"
     ],
@@ -26,6 +27,9 @@
     "filament_max_volumetric_speed": [
         "6"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "filament_vendor": [
         "Bambu Lab"
     ],
@@ -44,6 +48,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "textured_plate_temp": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json
index 1d72fe95803..7a60603cae0 100644
--- a/resources/profiles/BBL/filament/Bambu Support G @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support G @base.json	
@@ -5,11 +5,12 @@
     "from": "system",
     "filament_id": "GFS01",
     "instantiation": "false",
-    "required_nozzle_HRC": [
-        "3"
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
+    "fan_cooling_layer_time": [
+        "10"
     ],
-    "filament_vendor": [
-        "Bambu Lab"
+    "filament_cost": [
+        "34.99"
     ],
     "filament_density": [
         "1.22"
@@ -17,17 +18,20 @@
     "filament_is_support": [
         "1"
     ],
-    "nozzle_temperature_initial_layer": [
-        "280"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "280"
     ],
-    "fan_cooling_layer_time": [
-        "10"
+    "nozzle_temperature_initial_layer": [
+        "280"
     ],
-    "filament_cost": [
-        "34.99"
+    "required_nozzle_HRC": [
+        "3"
+    ],
+    "filament_scarf_seam_type": [
+        "none"
     ],
     "slow_down_layer_time": [
         "6"
diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json
index 63f7acebc8d..2b40b44e085 100644
--- a/resources/profiles/BBL/filament/Bambu Support W @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support W @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS00",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "cool_plate_temp": [
         "40"
     ],
@@ -23,6 +24,9 @@
     "filament_vendor": [
         "Bambu Lab"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json
index f0841864961..52655bf9fb3 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSS06_01",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab A1 0.4 nozzle",
         "Bambu Lab A1 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json
index 5029095bca5..9ae445e96c4 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json	
@@ -5,6 +5,12 @@
     "from": "system",
     "setting_id": "GFSS06_00",
     "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "compatible_printers": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab P1P 0.6 nozzle",
diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json
index 506ffa39acf..3bd74d4d960 100644
--- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
+++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS06",
     "instantiation": "false",
+    "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
     "fan_max_speed": [
         "30"
     ],
@@ -29,6 +30,9 @@
     "slow_down_layer_time": [
         "12"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
     "temperature_vitrification": [
         "90"
     ]
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json
index bc1e8393400..eb0555633a3 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json	
@@ -5,19 +5,20 @@
     "from": "system",
     "filament_id": "GFU01",
     "instantiation": "false",
-    "filament_vendor": [
-        "Bambu Lab"
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
     ],
     "filament_density": [
         "1.22"
     ],
-    "nozzle_temperature_initial_layer": [
-        "230"
-    ],
-    "filament_cost": [
-        "41.99"
+    "filament_vendor": [
+        "Bambu Lab"
     ],
     "nozzle_temperature": [
         "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json
index 0445791bfc6..6deab30b356 100644
--- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json	
+++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFU00",
     "instantiation": "false",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_cost": [
         "41.99"
     ],
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json
new file mode 100644
index 00000000000..52ed49cee12
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL A1",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json
new file mode 100644
index 00000000000..bff83af130d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL A1M",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_03",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json
new file mode 100644
index 00000000000..3c8c7dad73e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL P1P",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_01",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json
new file mode 100644
index 00000000000..8c7dac662f8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @BBL X1C",
+    "inherits": "Bambu TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU02_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json
new file mode 100644
index 00000000000..09d42965065
--- /dev/null
+++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json	
@@ -0,0 +1,54 @@
+{
+    "type": "filament",
+    "name": "Bambu TPU for AMS @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU02",
+    "instantiation": "false",
+    "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.",
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "38.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_flow_ratio": [
+        "0.97"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "filament_type": [
+        "TPU-AMS"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "nozzle_temperature_range_high": [
+        "240"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json
new file mode 100644
index 00000000000..06bca8c5f92
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @BBL X1C",
+    "inherits": "Fiberon PA12-CF @base",
+    "from": "system",
+    "setting_id": "GFSL52_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json
new file mode 100644
index 00000000000..e2a5bf64755
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA12-CF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA12-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL52",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "99.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_type": [
+        "PA-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "131"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json
new file mode 100644
index 00000000000..d10be7532a2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @BBL X1C",
+    "inherits": "Fiberon PA6-CF @base",
+    "from": "system",
+    "setting_id": "GFSL50_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json
new file mode 100644
index 00000000000..5027f220967
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-CF @base.json	
@@ -0,0 +1,68 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL50",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "83.99"
+    ],
+    "filament_density": [
+        "1.17"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "filament_type": [
+        "PA6-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "215"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json
new file mode 100644
index 00000000000..c38dfd17956
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @BBL X1C",
+    "inherits": "Fiberon PA6-GF @base",
+    "from": "system",
+    "setting_id": "GFSL51_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json
new file mode 100644
index 00000000000..9ab9237e7b2
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA6-GF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA6-GF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL51",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "40"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "filament_cost": [
+        "63.99"
+    ],
+    "filament_density": [
+        "1.2"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PA-GF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "280"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "temperature_vitrification": [
+        "191"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json
new file mode 100644
index 00000000000..d91d220575d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @BBL X1C",
+    "inherits": "Fiberon PA612-CF @base",
+    "from": "system",
+    "setting_id": "GFSL53_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json
new file mode 100644
index 00000000000..031f9737be5
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PA612-CF @base.json	
@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "name": "Fiberon PA612-CF @base",
+    "inherits": "fdm_filament_pa",
+    "from": "system",
+    "filament_id": "GFL53",
+    "instantiation": "false",
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "filament_cost": [
+        "94.99"
+    ],
+    "filament_density": [
+        "1.06"
+    ],
+    "filament_flow_ratio": [
+        "0.96"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "full_fan_speed_layer": [
+        "2"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "temperature_vitrification": [
+        "180"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json
new file mode 100644
index 00000000000..789dddb752d
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PET-CF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @BBL X1C",
+    "inherits": "Fiberon PET-CF @base",
+    "from": "system",
+    "setting_id": "GFSL54_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PET-CF @base.json b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json
new file mode 100644
index 00000000000..8a6520f1f46
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PET-CF @base.json	
@@ -0,0 +1,89 @@
+{
+    "type": "filament",
+    "name": "Fiberon PET-CF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL54",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "242"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "89.99"
+    ],
+    "filament_density": [
+        "1.34"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PET-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "nozzle_temperature_range_high": [
+        "300"
+    ],
+    "nozzle_temperature_range_low": [
+        "270"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "supertack_plate_temp": [
+        "80"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "147"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json
new file mode 100644
index 00000000000..0cce20991fc
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @BBL X1C.json	
@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @BBL X1C",
+    "inherits": "Fiberon PETG-ESD @base",
+    "from": "system",
+    "setting_id": "GFSL06_00",
+    "instantiation": "true",
+    "filament_cost": [
+        "29.99"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json
new file mode 100644
index 00000000000..9f861a724ed
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-ESD @base.json	
@@ -0,0 +1,77 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-ESD @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL06",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "60"
+    ],
+    "fan_cooling_layer_time": [
+        "15"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "290"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "290"
+    ],
+    "nozzle_temperature_range_high": [
+        "290"
+    ],
+    "nozzle_temperature_range_low": [
+        "250"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "76"
+    ],
+    "textured_plate_temp": [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "60"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json
new file mode 100644
index 00000000000..790d2565506
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @BBL X1C.json	
@@ -0,0 +1,16 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @BBL X1C",
+    "inherits": "Fiberon PETG-rCF @base",
+    "from": "system",
+    "setting_id": "GFSL55_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json
new file mode 100644
index 00000000000..aa367e2e2b8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Fiberon PETG-rCF @base.json	
@@ -0,0 +1,80 @@
+{
+    "type": "filament",
+    "name": "Fiberon PETG-rCF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFL55",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "12"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "filament_cost": [
+        "39.99"
+    ],
+    "filament_density": [
+        "1.3"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "PETG-CF"
+    ],
+    "filament_vendor": [
+        "Polymaker"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "nozzle_temperature_range_low": [
+        "240"
+    ],
+    "required_nozzle_HRC": [
+        "40"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json
index e41b289fbcf..80a90af9936 100644
--- a/resources/profiles/BBL/filament/Generic ABS @base.json	
+++ b/resources/profiles/BBL/filament/Generic ABS @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB99",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json
index 9f80b36f121..148f69f3d06 100644
--- a/resources/profiles/BBL/filament/Generic ASA @base.json	
+++ b/resources/profiles/BBL/filament/Generic ASA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFB98",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic EVA @base.json b/resources/profiles/BBL/filament/Generic EVA @base.json
index 6a24cfdba57..7c225320349 100644
--- a/resources/profiles/BBL/filament/Generic EVA @base.json	
+++ b/resources/profiles/BBL/filament/Generic EVA @base.json	
@@ -38,9 +38,6 @@
     "filament_max_volumetric_speed": [
         "12"
     ],
-    "filament_type": [
-        "EVA"
-    ],
     "hot_plate_temp": [
         "55"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json
index 5ce9881f823..e229358d4cc 100644
--- a/resources/profiles/BBL/filament/Generic PA-CF.json	
+++ b/resources/profiles/BBL/filament/Generic PA-CF.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN98",
     "setting_id": "GFSN99",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json
index 6a4f7bf4e2a..d7dd99831f4 100644
--- a/resources/profiles/BBL/filament/Generic PA.json	
+++ b/resources/profiles/BBL/filament/Generic PA.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN99",
     "setting_id": "GFSN98",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "chamber_temperatures": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json
index 6c56650bafb..c2a9975e371 100644
--- a/resources/profiles/BBL/filament/Generic PC @base.json	
+++ b/resources/profiles/BBL/filament/Generic PC @base.json	
@@ -5,10 +5,11 @@
     "from": "system",
     "filament_id": "GFC99",
     "instantiation": "false",
-    "filament_max_volumetric_speed": [
-        "16"
-    ],
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_flow_ratio": [
         "0.94"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json
new file mode 100644
index 00000000000..099dfcc30a9
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_05",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json
new file mode 100644
index 00000000000..d8700688126
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_04",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json
new file mode 100644
index 00000000000..0b499781aea
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1M 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_07",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json
new file mode 100644
index 00000000000..b42117eec90
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL A1M",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_06",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.4 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json
new file mode 100644
index 00000000000..ff6131e5156
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json	
@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL P1P 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_03",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json
new file mode 100644
index 00000000000..00587abea4f
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json	
@@ -0,0 +1,13 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL P1P",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_02",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json
new file mode 100644
index 00000000000..963be7b885e
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL X1C 0.2 nozzle",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_01",
+    "instantiation": "true",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1E 0.2 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json
new file mode 100644
index 00000000000..cdb1a1196c4
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json	
@@ -0,0 +1,22 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @BBL X1C",
+    "inherits": "Generic PETG HF @base",
+    "from": "system",
+    "setting_id": "GFSG96_00",
+    "instantiation": "true",
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG HF @base.json b/resources/profiles/BBL/filament/Generic PETG HF @base.json
new file mode 100644
index 00000000000..085538fe911
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic PETG HF @base.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "name": "Generic PETG HF @base",
+    "inherits": "fdm_filament_pet",
+    "from": "system",
+    "filament_id": "GFG96",
+    "instantiation": "false",
+    "cool_plate_temp": [
+        "0"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "0"
+    ],
+    "eng_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "70"
+    ],
+    "fan_cooling_layer_time": [
+        "30"
+    ],
+    "fan_max_speed": [
+        "40"
+    ],
+    "filament_cost": [
+        "24.99"
+    ],
+    "filament_density": [
+        "1.28"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature_range_high": [
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "90"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "25"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json
index 4e12feba51e..56909012160 100644
--- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json	
@@ -38,9 +38,6 @@
     "filament_type": [
         "PETG-CF"
     ],
-    "filament_vendor": [
-        "Generic"
-    ],
     "hot_plate_temp": [
         "70"
     ],
@@ -65,9 +62,6 @@
     "slow_down_layer_time": [
         "6"
     ],
-    "temperature_vitrification": [
-        "70"
-    ],
     "textured_plate_temp": [
         "70"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json
index 904cef4daea..bf37d0917e2 100644
--- a/resources/profiles/BBL/filament/Generic PLA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFL99",
     "instantiation": "false",
+    "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.",
     "filament_flow_ratio": [
         "0.98"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json
index 60ac1d46fa1..03f0c0edcd0 100644
--- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json	
@@ -5,9 +5,16 @@
     "from": "system",
     "filament_id": "GFL96",
     "instantiation": "false",
+    "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
     "filament_flow_ratio": [
         "0.98"
     ],
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
     "slow_down_layer_time": [
         "8"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json
index 597bdd6e23b..8bb1564a4ce 100644
--- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json	
@@ -23,6 +23,12 @@
     "required_nozzle_HRC": [
         "40"
     ],
+    "supertack_plate_temp": [
+        "50"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "50"
+    ],
     "slow_down_layer_time": [
         "7"
     ],
diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json
index 1e642929b29..8c6a9c9b8dc 100644
--- a/resources/profiles/BBL/filament/Generic PPA-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json	
@@ -5,12 +5,10 @@
     "from": "system",
     "filament_id": "GFN97",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_max_volumetric_speed": [
         "6"
     ],
-    "filament_type": [
-        "PPA-CF"
-    ],
     "filament_vendor": [
         "Generic"
     ]
diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json
index 887d276e2da..5fc5d6e4078 100644
--- a/resources/profiles/BBL/filament/Generic PPS-CF @base.json	
+++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json	
@@ -5,11 +5,15 @@
     "from": "system",
     "filament_id": "GFT98",
     "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_max_speed": [
         "30"
     ],
+    "filament_cost": [
+        "240"
+    ],
     "filament_density": [
-        "1.3"
+        "1.26"
     ],
     "filament_max_volumetric_speed": [
         "3"
@@ -17,8 +21,8 @@
     "filament_type": [
         "PPS-CF"
     ],
-    "nozzle_temperature_range_high": [
-        "350"
+    "nozzle_temperature_range_low": [
+        "310"
     ],
     "required_nozzle_HRC": [
         "40"
diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json
index c29671ea3c4..c394eaeb975 100644
--- a/resources/profiles/BBL/filament/Generic PVA @base.json	
+++ b/resources/profiles/BBL/filament/Generic PVA @base.json	
@@ -5,6 +5,7 @@
     "from": "system",
     "filament_id": "GFS99",
     "instantiation": "false",
+    "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
     "filament_flow_ratio": [
         "0.95"
     ],
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json
new file mode 100644
index 00000000000..b73d35817b8
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL A1",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_02",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json
new file mode 100644
index 00000000000..bcb504c0385
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL A1M",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_03",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 mini 0.8 nozzle",
+        "Bambu Lab A1 mini 0.6 nozzle",
+        "Bambu Lab A1 mini 0.4 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json
new file mode 100644
index 00000000000..fafe5667f43
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json	
@@ -0,0 +1,31 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL P1P",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_01",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json
new file mode 100644
index 00000000000..b2e6d311977
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json	
@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @BBL X1C",
+    "inherits": "Generic TPU for AMS @base",
+    "from": "system",
+    "setting_id": "GFSU98_00",
+    "instantiation": "true",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "fan_max_speed": [
+        "50"
+    ],
+    "fan_min_speed": [
+        "10"
+    ],
+    "overhang_fan_threshold": [
+        "25%"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json
new file mode 100644
index 00000000000..c214ba1c272
--- /dev/null
+++ b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "name": "Generic TPU for AMS @base",
+    "inherits": "fdm_filament_tpu",
+    "from": "system",
+    "filament_id": "GFU98",
+    "instantiation": "false",
+    "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.",
+    "filament_cost": [
+        "41.99"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
+    "filament_max_volumetric_speed": [
+        "10.5"
+    ],
+    "filament_retraction_length": [
+        "0.8"
+    ],
+    "filament_type": [
+        "TPU-AMS"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json
index 273e9175708..f8dc0320b27 100644
--- a/resources/profiles/BBL/filament/Generic TPU.json	
+++ b/resources/profiles/BBL/filament/Generic TPU.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFU99",
     "setting_id": "GFSR99",
     "instantiation": "true",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json
index f99a91cfb05..b80e46e1517 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json
index 63d6bb3f21a..c27df74dbbb 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json	
@@ -8,9 +8,15 @@
     "fan_max_speed": [
         "20"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "16"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json
index ccbfad93a50..f98e7469af8 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json
index a0a6388bcc8..e18e63964a5 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json	
@@ -14,9 +14,15 @@
     "fan_min_speed": [
         "5"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "11.5"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "overhang_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json
index 01a5fab4a1e..ad0784193ba 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json	
@@ -11,6 +11,12 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json
index 469caee5cd2..c67fe1d5f81 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "2"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json
index fcfc07fd191..7a1fb8c2121 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "22"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json
index 500dacbbf33..af07fa05bac 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json
index 640bb4af9a9..72bb17aa43a 100644
--- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json	
@@ -11,9 +11,15 @@
     "fan_min_speed": [
         "50"
     ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
     "hot_plate_temp": [
         "65"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json
index b09cbf6aee5..bfaee00f09a 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN99",
     "setting_id": "GFSN98_10",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "60"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json
index 1e17c278ce2..92d4992a83f 100644
--- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFN98",
     "setting_id": "GFSN99_10",
     "instantiation": "true",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "fan_cooling_layer_time": [
         "5"
     ],
diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json
index effdb2d7f3c..11323400684 100644
--- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
+++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json	
@@ -6,6 +6,7 @@
     "filament_id": "GFU99",
     "setting_id": "GFSR99_10",
     "instantiation": "true",
+    "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
     "filament_max_volumetric_speed": [
         "3.2"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json
index 74eb8715180..c01bfb694c3 100644
--- a/resources/profiles/BBL/filament/fdm_filament_abs.json
+++ b/resources/profiles/BBL/filament/fdm_filament_abs.json
@@ -5,6 +5,12 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
         "0"
     ],
     "cool_plate_temp": [
diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json
index a0da767a75c..ce1126adf55 100644
--- a/resources/profiles/BBL/filament/fdm_filament_asa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_asa.json
@@ -5,6 +5,12 @@
     "from": "system",
     "instantiation": "false",
     "activate_air_filtration": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
         "0"
     ],
     "cool_plate_temp": [
diff --git a/resources/profiles/BBL/filament/fdm_filament_bvoh.json b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
index 2b481e35d88..10b86375bb8 100644
--- a/resources/profiles/BBL/filament/fdm_filament_bvoh.json
+++ b/resources/profiles/BBL/filament/fdm_filament_bvoh.json
@@ -67,6 +67,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_min_speed": [
         "20"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json
index 6ec95db4a80..1e7a813c4b4 100644
--- a/resources/profiles/BBL/filament/fdm_filament_common.json
+++ b/resources/profiles/BBL/filament/fdm_filament_common.json
@@ -114,6 +114,21 @@
     "full_fan_speed_layer": [
         "0"
     ],
+    "filament_scarf_seam_type": [
+        "none"
+    ],
+    "filament_scarf_height": [
+        "10%"
+    ],
+    "filament_scarf_gap": [
+        "0%"
+    ],
+    "filament_scarf_length": [
+        "10"
+    ],
+    "filament_shrink": [
+        "100%"
+    ],
     "hot_plate_temp": [
         "60"
     ],
@@ -138,6 +153,12 @@
     "required_nozzle_HRC": [
         "3"
     ],
+    "supertack_plate_temp": [
+        "45"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "45"
+    ],
     "slow_down_for_layer_cooling": [
         "1"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_eva.json b/resources/profiles/BBL/filament/fdm_filament_eva.json
index 1b2efe2999b..5eaf47fd3c5 100644
--- a/resources/profiles/BBL/filament/fdm_filament_eva.json
+++ b/resources/profiles/BBL/filament/fdm_filament_eva.json
@@ -6,5 +6,11 @@
     "instantiation": "false",
     "filament_type": [
         "EVA"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json
index 4d1b09d37af..c7c0ab7d2f7 100644
--- a/resources/profiles/BBL/filament/fdm_filament_hips.json
+++ b/resources/profiles/BBL/filament/fdm_filament_hips.json
@@ -16,6 +16,12 @@
     "textured_plate_temp": [
         "90"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp_initial_layer": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json
index 1cd78ec77f6..5f0a1ca7fc2 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pa.json
@@ -7,6 +7,12 @@
     "activate_air_filtration": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json
index 03bc9e5663f..313655fc8a3 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pc.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pc.json
@@ -4,6 +4,12 @@
     "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pctg.json b/resources/profiles/BBL/filament/fdm_filament_pctg.json
index 1b38376293e..5c93c7d0d4a 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pctg.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pctg.json
@@ -1,64 +1,70 @@
 {
-  "type": "filament",
-  "name": "fdm_filament_pctg",
-  "inherits": "fdm_filament_common",
-  "from": "system",
-  "instantiation": "false",
-  "eng_plate_temp": [
-      "0"
-  ],
-  "eng_plate_temp_initial_layer": [
-      "0"
-  ],
-  "fan_cooling_layer_time": [
-      "20"
-  ],
-  "fan_min_speed": [
-      "20"
-  ],
-  "filament_cost": [
-      "30"
-  ],
-  "filament_density": [
-      "1.27"
-  ],
-  "filament_max_volumetric_speed": [
-      "25"
-  ],
-  "filament_type": [
-      "PCTG"
-  ],
-  "hot_plate_temp": [
-      "80"
-  ],
-  "hot_plate_temp_initial_layer": [
-      "80"
-  ],
-  "nozzle_temperature": [
-      "255"
-  ],
-  "nozzle_temperature_initial_layer": [
-      "255"
-  ],
-  "nozzle_temperature_range_high": [
-      "260"
-  ],
-  "nozzle_temperature_range_low": [
-      "220"
-  ],
-  "reduce_fan_stop_start_freq": [
-      "1"
-  ],
-  "temperature_vitrification": [
-      "70"
-  ],
-  "textured_plate_temp": [
-      "80"
-  ],
-  "textured_plate_temp_initial_layer": [
-      "80"
-  ],
-  "filament_start_gcode": [
-      "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
-  ]
+    "type": "filament",
+    "name": "fdm_filament_pctg",
+    "inherits": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "eng_plate_temp": [
+        "0"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "20"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
+    "filament_max_volumetric_speed": [
+        "25"
+    ],
+    "filament_type": [
+        "PCTG"
+    ],
+    "hot_plate_temp": [
+        "80"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "80"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "255"
+    ],
+    "nozzle_temperature_range_high": [
+        "260"
+    ],
+    "nozzle_temperature_range_low": [
+        "220"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
+    "temperature_vitrification": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "80"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "80"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+    ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/filament/fdm_filament_pe.json b/resources/profiles/BBL/filament/fdm_filament_pe.json
index 8ce20df68a2..0808a35524c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pe.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pe.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json
index 4a5f6085cae..ef13f4f8947 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pet.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pet.json
@@ -49,6 +49,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "70"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "70"
+    ],
     "temperature_vitrification": [
         "70"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pha.json b/resources/profiles/BBL/filament/fdm_filament_pha.json
index 82519f1b2e4..19d143f5a7c 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pha.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pha.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json
index a93b981098f..9321b9ecad6 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pla.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pla.json
@@ -4,62 +4,56 @@
     "inherits": "fdm_filament_common",
     "from": "system",
     "instantiation": "false",
-    "fan_cooling_layer_time": [
-        "100"
-    ],
-    "filament_max_volumetric_speed": [
-        "12"
-    ],
-    "filament_density": [
-        "1.24"
+    "additional_cooling_fan_speed": [
+        "70"
     ],
-    "filament_cost": [
-        "20"
+    "close_fan_the_first_x_layers": [
+        "1"
     ],
     "cool_plate_temp": [
         "35"
     ],
-    "eng_plate_temp": [
-        "0"
-    ],
-    "hot_plate_temp": [
-        "55"
-    ],
-    "textured_plate_temp": [
-        "55"
-    ],
     "cool_plate_temp_initial_layer": [
         "35"
     ],
+    "eng_plate_temp": [
+        "0"
+    ],
     "eng_plate_temp_initial_layer": [
         "0"
     ],
-    "hot_plate_temp_initial_layer": [
-        "55"
+    "fan_cooling_layer_time": [
+        "100"
     ],
-    "textured_plate_temp_initial_layer": [
-        "55"
+    "fan_min_speed": [
+        "100"
     ],
-    "nozzle_temperature_initial_layer": [
-        "220"
+    "filament_cost": [
+        "20"
     ],
-    "reduce_fan_stop_start_freq": [
-        "1"
+    "filament_density": [
+        "1.24"
     ],
-    "fan_min_speed": [
-        "100"
+    "filament_max_volumetric_speed": [
+        "12"
     ],
-    "overhang_fan_threshold": [
-        "50%"
+    "filament_scarf_seam_type": [
+        "none"
     ],
-    "close_fan_the_first_x_layers": [
-        "1"
+    "filament_scarf_gap": [
+        "15%"
+    ],
+    "hot_plate_temp": [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "55"
     ],
     "nozzle_temperature": [
         "220"
     ],
-    "temperature_vitrification": [
-        "45"
+    "nozzle_temperature_initial_layer": [
+        "220"
     ],
     "nozzle_temperature_range_low": [
         "190"
@@ -67,14 +61,26 @@
     "nozzle_temperature_range_high": [
         "240"
     ],
-    "slow_down_min_speed": [
-        "20"
+    "overhang_fan_threshold": [
+        "50%"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
     ],
     "slow_down_layer_time": [
         "4"
     ],
-    "additional_cooling_fan_speed": [
-        "70"
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "temperature_vitrification": [
+        "45"
+    ],
+    "textured_plate_temp": [
+        "55"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "55"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
diff --git a/resources/profiles/BBL/filament/fdm_filament_pp.json b/resources/profiles/BBL/filament/fdm_filament_pp.json
index 83a42782507..66927c186a9 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pp.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pp.json
@@ -64,6 +64,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_ppa.json b/resources/profiles/BBL/filament/fdm_filament_ppa.json
index 23b082b05ca..c45e713f340 100644
--- a/resources/profiles/BBL/filament/fdm_filament_ppa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_ppa.json
@@ -7,6 +7,12 @@
     "activate_air_filtration": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pps.json b/resources/profiles/BBL/filament/fdm_filament_pps.json
index a3f104b6f3a..b8d366193eb 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pps.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pps.json
@@ -7,6 +7,12 @@
     "chamber_temperatures": [
         "60"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "0"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json
index 7d0bdf1b4a7..2b00903a609 100644
--- a/resources/profiles/BBL/filament/fdm_filament_pva.json
+++ b/resources/profiles/BBL/filament/fdm_filament_pva.json
@@ -70,6 +70,12 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "35"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "35"
+    ],
     "slow_down_layer_time": [
         "4"
     ],
diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json
index 8ec0a4fec3d..13a305e762e 100644
--- a/resources/profiles/BBL/filament/fdm_filament_tpu.json
+++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json
@@ -10,6 +10,12 @@
     "close_fan_the_first_x_layers": [
         "1"
     ],
+    "supertack_plate_temp": [
+        "0"
+    ],
+    "supertack_plate_temp_initial_layer": [
+        "0"
+    ],
     "cool_plate_temp": [
         "30"
     ],
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json
index b198ff4dda6..a897bd8aaae 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json	
@@ -16,10 +16,11 @@
         "Bambu PLA Basic @BBL A1"
     ],
     "default_print_profile": "0.20mm Standard @BBL A1",
+    "enable_long_retraction_when_cut": "2",
     "extruder_clearance_height_to_lid": "256",
     "extruder_clearance_height_to_rod": "25",
     "extruder_clearance_max_radius": "73",
-    "extruder_clearance_radius": "73",
+    "extruder_clearance_dist_to_rod": "56.5",
     "head_wrap_detect_zone": [
         "226x224",
         "256x224",
diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json
index 2608b6b731f..5319a77f854 100644
--- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json	
@@ -17,10 +17,11 @@
         "Bambu PLA Basic @BBL A1M"
     ],
     "default_print_profile": "0.20mm Standard @BBL A1M",
+    "enable_long_retraction_when_cut": "2",
     "extruder_clearance_height_to_lid": "180",
     "extruder_clearance_height_to_rod": "25",
     "extruder_clearance_max_radius": "73",
-    "extruder_clearance_radius": "73",
+    "extruder_clearance_dist_to_rod": "56.5",
     "head_wrap_detect_zone": [
         "156x152",
         "180x152",
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json
index c92d63d0b65..b947c06289c 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json	
@@ -37,7 +37,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20241115 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
+    "machine_start_gcode": ";===== machine: P1P ========================\n;===== date: 20230707 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression",
     "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n",
     "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG17\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 E[retraction_length] F300\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json
index 8b9d063dbc5..5cee189af55 100644
--- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json	
@@ -29,7 +29,6 @@
     "nozzle_height": "4.2",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "0",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1P 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json
index 9c1127eec43..2fa72d13f96 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json	
@@ -30,5 +30,5 @@
         "Bambu Lab X1E 0.2 nozzle",
         "Bambu Lab A1 0.2 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json
index a70b7c8f11d..90b3f201472 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json	
@@ -30,7 +30,6 @@
     "nozzle_height": "4.2",
     "nozzle_type": "stainless_steel",
     "scan_first_layer": "1",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
@@ -38,7 +37,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n",
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10  N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json
index ec5a3b1ea9c..5d5d0ea81a7 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json	
@@ -34,5 +34,5 @@
         "Bambu Lab X1E 0.6 nozzle",
         "Bambu Lab A1 0.6 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json
index fd1aa6bf82e..e9002fed0c7 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json	
@@ -34,5 +34,5 @@
         "Bambu Lab X1E 0.8 nozzle",
         "Bambu Lab A1 0.8 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json
index a0b54160a5c..fc3fbaced39 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json	
@@ -31,5 +31,5 @@
         "Bambu Lab X1E 0.2 nozzle",
         "Bambu Lab A1 0.2 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n\t{if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.160\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.080\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json
index 6577b3950ad..70baeeacec3 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json	
@@ -28,7 +28,6 @@
     "machine_unload_filament_time": "28",
     "nozzle_height": "4.2",
     "scan_first_layer": "1",
-    "support_air_filtration": "1",
     "upward_compatible_machine": [
         "Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab P1P 0.4 nozzle",
@@ -36,7 +35,7 @@
         "Bambu Lab X1E 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4",
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240919 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish  sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10  N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{old_filament_e_feedrate}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json
index 2dffc6f94c6..02326f033f3 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json	
@@ -33,5 +33,5 @@
         "Bambu Lab X1E 0.6 nozzle",
         "Bambu Lab A1 0.6 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20240528 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 =========================\n;===== date: 20241023 =====================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.333\n    G0 F1200.0 X226 Y15   Z0.2 E0.495\n    G0 F1200.0 X226 Y8    Z0.2 E0.691\n    G0 F1200.0 X216 Y8    Z0.2 E0.988\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.642\n\n    G0 X48.0 E20.56 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.56 F1200.0\n    G0 X35.0 Y6.0 E1.75 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.030\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.015\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000  E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n    M623\n\n    G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json
index 4e22e6bc784..2ccd165cb6e 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json	
@@ -33,5 +33,5 @@
         "Bambu Lab X1E 0.8 nozzle",
         "Bambu Lab A1 0.8 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20240528 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n"
+    "machine_start_gcode": ";===== machine: X1 ====================\n;===== date: 20241023 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    G0 F1200.0 X231 Y15   Z0.2 E1.482\n    G0 F1200.0 X226 Y15   Z0.2 E0.550\n    G0 F1200.0 X226 Y8    Z0.2 E0.768\n    G0 F1200.0 X216 Y8    Z0.2 E1.098\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.714\n\n    G0 X48.0 E25.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E1.70 F1200.0\n    G0 X35.0 Y6.0 E1.90 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X110.000 E9.35441 F4800\n    G0 X185.000 E9.35441 F4800\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.010\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000  E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X70.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X75.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X80.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X85.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X90.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X95.000  E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n    M623\n\n    G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n    G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0)     * 60}\n    M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json
index 3050ab385a0..4277bdf3dce 100644
--- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json	
+++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json	
@@ -37,7 +37,7 @@
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab A1 0.4 nozzle"
     ],
-    "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20230815 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6)    * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n\n",
+    "machine_start_gcode": ";===== machine: X1E =========================\n;===== date: 20240919 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A   ; switch material if AMS exist\n    M109 S[nozzle_temperature_initial_layer]\n    G1 X120 F12000\n\n    G1 X20 Y50 F12000\n    G1 Y-3\n    T[initial_no_support_extruder]\n    G1 X54 F12000\n    G1 Y265\n    M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60} T{nozzle_temperature_range_high[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000  ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000  ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n    M1002 gcode_claim_action : 1\n    G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n    M400\n    M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n    M1002 gcode_claim_action : 13\n    G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {elsif (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {endif};Prevent PLA from jamming\n    M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80  H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed  scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2  ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M1002 gcode_claim_action : 8\n\n    T1000\n\n    G0 F1200.0 X231 Y15   Z0.2 E0.741\n    G0 F1200.0 X226 Y15   Z0.2 E0.275\n    G0 F1200.0 X226 Y8    Z0.2 E0.384\n    G0 F1200.0 X216 Y8    Z0.2 E0.549\n    G0 F1200.0 X216 Y1.5  Z0.2 E0.357\n\n    G0 X48.0 E12.0 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\n    G0 X48.0 Y14 E0.92 F1200.0\n    G0 X35.0 Y6.0 E1.03 F1200.0\n\n    ;=========== extruder cali extrusion ==================\n    T1000\n    M83\n    {if default_acceleration > 0}\n        {if outer_wall_acceleration > 0}\n            M204 S[outer_wall_acceleration]\n        {else}\n            M204 S[default_acceleration]\n        {endif}\n    {endif}\n    G0 X35.000 Y6.000 Z0.300 F30000 E0\n    G1 F1500.000 E0.800\n    M106 S0 ; turn off fan\n    G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G0 X187 Z0\n    G1 F1500.000 E-0.800\n    G0 Z1\n    G0 X180 Z0.3 F18000\n\n    M900 L1000.0 M1.0\n    M900 K0.040\n    G0 X45.000 F30000\n    G0 Y8.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.020\n    G0 X45.000 F30000\n    G0 Y10.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n    M400\n\n    G0 X45.000 F30000\n    M900 K0.000\n    G0 X45.000 F30000\n    G0 Y12.000 F30000\n    G1 F1500.000 E0.800\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 F1500.000 E-0.800\n    G1 X183 Z0.15 F30000\n    G1 X185\n    G1 Z1.0\n    G0 Y6.000 F30000 ; move y to clear pos\n    G1 Z0.3\n\n    G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n    G0 X231 Y1.5 F30000\n    G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n    M973 S3 P1 ; camera start stream\n    M400 P500\n    M973 S1\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G0 F6000 X228.500 Y4.500 Z0.000\n    M960 S0 P1\n    M973 S1\n    M400 P800\n    M971 S6 P0\n    M973 S2 P0\n    M400 P500\n    G0 Z0.000 F12000\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P200\n    M971 S5 P1\n    M973 S2 P1\n    M400 P500\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P3\n    G0 Z0.500 F12000\n    M960 S0 P0\n    M960 S2 P1\n    G0 X228.5 Y11.0\n    M400 P200\n    M971 S5 P4\n    M973 S2 P0\n    M400 P500\n    M960 S0 P0\n    M960 S1 P1\n    G0 X221.00 Y4.50\n    M400 P500\n    M971 S5 P2\n    M963 S1\n    M400 P1500\n    M964\n    T1100\n    G1 Z3 F3000\n\n    M400\n    M500 ; save cali data\n\n    M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n    T1100\n    M400 P400\n    M960 S0 P0\n    G0 F30000.000 Y10.000 X65.000 Z0.000\n    M400 P400\n    M960 S1 P1\n    M400 P50\n\n    M969 S1 N3 A2000\n    G0 F360.000 X181.000 Z0.000\n    M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n    M400 P100\n    G0 F20000\n    G0 Z1 ; rise nozzle up\n    T1000 ; change to nozzle space\n    G0 X45.000 Y4.000 F30000 ; move to test line pos\n    M969 S0 ; turn off scanning\n    M960 S0 P0\n\n\n    G1 Z2 F20000\n    T1000\n    G0 X45.000 Y4.000 F30000 E0\n    M109 S{nozzle_temperature[initial_no_support_extruder]}\n    G0 Z0.3\n    G1 F1500.000 E3.600\n    G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n\n    ; see if extrude cali success, if not ,use default value\n    M1002 judge_last_extrude_cali_success\n    M622 J0\n        M400\n        M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n    M623\n\n    G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n    G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\n    M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5)    * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n",
     "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n    M400 ; wait all motion done\n    M991 S0 P-1 ;end smooth timelapse at safe pos\n    M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n    G1 Z{max_layer_z + 100.0} F600\n    G1 Z{max_layer_z +98.0}\n{else}\n    G1 Z250 F600\n    G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100  ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2   R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n",
     "change_filament_gcode": "M620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F[old_filament_e_feedrate] T{nozzle_temperature_range_high[previous_extruder]}\nT[next_extruder]\nM620.1 E F[new_filament_e_feedrate] T{nozzle_temperature_range_high[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S[nozzle_temperature_range_high]\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{old_filament_e_feedrate} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{old_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{new_filament_e_feedrate}\n{else}\nG1 E{flush_length_1} F{old_filament_e_feedrate}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{new_filament_e_feedrate}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{new_filament_e_feedrate} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n"
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json
index 59c372c15fc..e0968ac56f5 100644
--- a/resources/profiles/BBL/machine/fdm_machine_common.json
+++ b/resources/profiles/BBL/machine/fdm_machine_common.json
@@ -79,9 +79,10 @@
         "0.08"
     ],
     "printable_height": "250",
-    "extruder_clearance_radius": "65",
     "extruder_clearance_height_to_rod": "34",
     "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_max_radius": "65",
+    "extruder_clearance_dist_to_rod": "33",
     "printer_settings_id": "",
     "retraction_minimum_travel": [
         "2"
@@ -123,7 +124,5 @@
     "upward_compatible_machine": [],
     "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
     "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
-    "change_filament_gcode": "",
-    "purge_in_prime_tower": "0",
-    "enable_filament_ramming": "0"
+    "change_filament_gcode": ""
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json
index 227fb04c57e..37a2a127773 100644
--- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
+++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json	
@@ -8,7 +8,6 @@
     "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
     "elefant_foot_compensation": "0.15",
     "compatible_printers": [
-        "Bambu Lab P1P 0.2 nozzle",
-        "Bambu Lab P1S 0.2 nozzle"
+        "Bambu Lab P1P 0.2 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
index 0857a48e0e3..364bcaa1ee4 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.06_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
index 80670ce3b6b..52a1749075b 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.08_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
index 9d54d14c185..020a3f9cc87 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.10_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
index 9d35f2501e5..56aedfd03ed 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.12_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
index 573669d4a5b..7c10c6c6730 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.14_nozzle_0.2.json
@@ -12,6 +12,7 @@
     "bridge_flow": "1",
     "line_width": "0.22",
     "outer_wall_line_width": "0.22",
+    "ironing_inset": "0.11",
     "initial_layer_line_width": "0.25",
     "sparse_infill_line_width": "0.22",
     "inner_wall_line_width": "0.22",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
index 0220f43a0d1..31c88af561e 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.18_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
index 514e31759ac..ca621513421 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
index 5fedaf53d63..88e1f680758 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.24_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
index 26b39f37363..08476dbb784 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.30_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
index 0f5913b2eb7..c1622d28f55 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.32_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
index f94531fbe37..f9c917dfc58 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.36_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
index 3e0d8b147ee..be6eb5944a3 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.40_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
index 07120eef78d..d879b17b8b0 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.42_nozzle_0.6.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.62",
     "outer_wall_line_width": "0.62",
+    "ironing_inset": "0.31",
     "initial_layer_line_width": "0.62",
     "sparse_infill_line_width": "0.62",
     "inner_wall_line_width": "0.62",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
index 3a77fbf006e..e9955abd55e 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.48_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
index 3970ac5ac72..99fb6bf6e7d 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_0.56_nozzle_0.8.json
@@ -9,6 +9,7 @@
     "bridge_flow": "1",
     "line_width": "0.82",
     "outer_wall_line_width": "0.82",
+    "ironing_inset": "0.41",
     "initial_layer_line_width": "0.82",
     "sparse_infill_line_width": "0.82",
     "inner_wall_line_width": "0.82",
diff --git a/resources/profiles/BBL/process/fdm_process_bbl_common.json b/resources/profiles/BBL/process/fdm_process_bbl_common.json
index fc377a0b86a..d77980a29d8 100644
--- a/resources/profiles/BBL/process/fdm_process_bbl_common.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json
@@ -59,6 +59,7 @@
     "tree_support_branch_diameter": "2",
     "tree_support_branch_angle": "45",
     "tree_support_wall_count": "0",
+    "max_bridge_length": "0",
     "top_surface_pattern": "monotonicline",
     "top_surface_acceleration": "2000",
     "top_surface_speed": "200",
diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json
index c68411dbbe1..1723f8835ed 100644
--- a/resources/profiles/BBL/process/fdm_process_common.json
+++ b/resources/profiles/BBL/process/fdm_process_common.json
@@ -13,6 +13,7 @@
     "bridge_no_support": "0",
     "elefant_foot_compensation": "0.1",
     "outer_wall_line_width": "0.42",
+    "ironing_inset": "0.21",
     "outer_wall_speed": "120",
     "line_width": "0.45",
     "infill_direction": "45",
@@ -69,5 +70,6 @@
     "xy_contour_compensation": "0",
     "compatible_printers": [],
     "smooth_coefficient": "80",
-    "overhang_totally_speed": "24"
+    "overhang_totally_speed": "19",
+    "scarf_angle_threshold": "155"
 }
\ No newline at end of file

From baf83f536bd78a1956548e58505b49070ddac1c3 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:55:15 +0100
Subject: [PATCH 23/59] fix: updated BBL.json

---
 .idea/codeStyles/Project.xml                  |  99 ++
 .idea/misc.xml                                |   3 +
 Dockerfile                                    |  27 +-
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 957 ++++++++++++++++++
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 ++
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 ++
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 0 -> 15448 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 0 -> 15464 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 +
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 0 -> 15560 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 0 -> 15576 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ++++++++++
 .../CMakeFiles/clion-Debug-log.txt            |  66 ++
 .../CMakeFiles/clion-environment.txt          |   4 +
 .../CMakeFiles/cmake.check_cache              |   1 +
 resources/profiles/BBL.json                   | 174 +++-
 22 files changed, 3894 insertions(+), 23 deletions(-)
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 create mode 100644 cmake-build-debug/CMakeCache.txt
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 create mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 create mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 create mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
index f60388162da..53162672047 100644
--- a/.idea/codeStyles/Project.xml
+++ b/.idea/codeStyles/Project.xml
@@ -1,5 +1,104 @@
 <component name="ProjectCodeStyleConfiguration">
   <code_scheme name="Project" version="173">
+    <RiderCodeStyleSettings>
+      <option name="/Default/CodeStyle/CodeFormatting/CppClangFormat/EnableClangFormatSupport/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/EditorConfig/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_BINARY_EXPRESSIONS_CHAIN/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_CALLS_CHAIN/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXPRESSION/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_FOR_STMT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTIPLE_DECLARATION/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_TERNARY/@EntryValue" value="ALIGN_ALL" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_CLASS_DEFINITION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_DECLARATIONS/@EntryValue" value="2" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_CODE/@EntryValue" value="2" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_USER_LINEBREAKS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CASE_FROM_SWITCH/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_COMMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INT_ALIGN_EQ/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SIMPLE_BLOCK_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_PARAMS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_SEMICOLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_SEMICOLON/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_UNARY_OPERATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_ARRAY_ACCESS_BRACKETS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_METHOD_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPECIAL_ELSE_IF_TREATMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_BINARY_OPSIGN/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_TERNARY_OPSIGNS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TYPE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/OTHER_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CASE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DECLARATION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DEFINITION/@EntryValue" value="1" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_WHILE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_ELSE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_CATCH_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_INDENTATION/@EntryValue" value="All" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_ARGUMENT/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXTENDS_LIST/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_PARAMETER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_ARGUMENT/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_PARAMETER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_DECLARATIONS/@EntryValue" value="0" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_ACCESS_SPECIFIERS_FROM_CLASS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CLASS_MEMBERS_FROM_ACCESS_SPECIFIERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/LINE_BREAK_AFTER_COLON_IN_MEMBER_INITIALIZER_LISTS/@EntryValue" value="ON_SINGLE_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/MEMBER_INITIALIZER_LIST_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_NAMESPACE_DEFINITIONS_ON_SAME_LINE/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_COLON/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_COLON/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_METHOD/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_NESTED_DECLARATOR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_METHOD/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_METHOD/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_METHOD/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BETWEEN_CLOSING_ANGLE_BRACKETS_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_DECLARATION_PARENTHESES/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_BLOCKS/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_RPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_RPAR/@EntryValue" value="false" type="bool" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_ARGUMENTS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_PARAMETERS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BREAK_TEMPLATE_DECLARATION/@EntryValue" value="LINE_BREAK" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/FREE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INVOCABLE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ANONYMOUS_METHOD_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INITIALIZER_BRACES/@EntryValue" value="END_OF_LINE_NO_SPACE" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_STYLE/@EntryValue" value="Space" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_SIZE/@EntryValue" value="4" type="int" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CONTINUOUS_LINE_INDENT/@EntryValue" value="Double" type="string" />
+      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TAB_WIDTH/@EntryValue" value="4" type="int" />
+    </RiderCodeStyleSettings>
     <clangFormatSettings>
       <option name="ENABLED" value="true" />
     </clangFormatSettings>
diff --git a/.idea/misc.xml b/.idea/misc.xml
index 79b3c94830b..0b76fe5109e 100644
--- a/.idea/misc.xml
+++ b/.idea/misc.xml
@@ -1,4 +1,7 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <project version="4">
+  <component name="CMakePythonSetting">
+    <option name="pythonIntegrationState" value="YES" />
+  </component>
   <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
 </project>
\ No newline at end of file
diff --git a/Dockerfile b/Dockerfile
index 868779b0afe..5e8c8274ad8 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,6 +1,12 @@
 FROM docker.io/ubuntu:22.04
 LABEL maintainer "DeftDawg <DeftDawg@gmail.com>"
 
+# Declare build arguments
+ARG USER=root
+ARG UID=0
+ARG GID=0
+ARG NCORES=1
+
 # Disable interactive package configuration
 RUN apt-get update && \
     echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
@@ -9,7 +15,8 @@ RUN apt-get update && \
 RUN echo deb-src http://archive.ubuntu.com/ubuntu \
     $(cat /etc/*release | grep VERSION_CODENAME | cut -d= -f2) main universe>> /etc/apt/sources.list 
 
-RUN apt-get update && apt-get install  -y \
+# Install dependencies
+RUN apt-get update && apt-get install -y \
     autoconf \
     build-essential \
     cmake \
@@ -53,12 +60,13 @@ RUN apt-get update && apt-get install  -y \
 # Change your locale here if you want.  See the output
 # of `locale -a` to pick the correct string formatting.
 ENV LC_ALL=en_US.utf8
-RUN locale-gen $LC_ALL
+RUN locale-gen "$LC_ALL"
 
 # Set this so that Orca Slicer doesn't complain about
 # the CA cert path on every startup
 ENV SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
 
+# Copy project files
 COPY ./ OrcaSlicer
 
 WORKDIR OrcaSlicer
@@ -83,13 +91,12 @@ RUN ./BuildLinux.sh -i
 # to keep permissions the same.  Just in case, defaults
 # are root.
 SHELL ["/bin/bash", "-l", "-c"]
-ARG USER=root
-ARG UID=0
-ARG GID=0
-RUN [[ "$UID" != "0" ]] \
-  && groupadd -f -g $GID $USER \
-  && useradd -u $UID -g $GID $USER
 
-# Using an entrypoint instead of CMD because the binary
-# accepts several command line arguments.
+# Create user if not root
+RUN if [ "$UID" != "0" ]; then \
+      groupadd -f -g "$GID" "$USER" && \
+      useradd -u "$UID" -g "$GID" "$USER"; \
+    fi
+
+# Set entrypoint
 ENTRYPOINT ["/OrcaSlicer/build/package/bin/orca-slicer"]
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
new file mode 100644
index 00000000000..6a1c377b37b
--- /dev/null
+++ b/cmake-build-debug/CMakeCache.txt
@@ -0,0 +1,957 @@
+# This is the CMakeCache file.
+# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+# You can edit this file to change values found and used by cmake.
+# If you do not want to change any of the values, simply exit the editor.
+# If you do want to change a value, simply edit, save, and exit the editor.
+# The syntax for the file is as follows:
+# KEY:TYPE=VALUE
+# KEY is the name of a variable in the cache.
+# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
+# VALUE is the current value for the KEY.
+
+########################
+# EXTERNAL cache entries
+########################
+
+Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
+
+Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
+
+Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
+
+//The directory containing a CMake configuration file for Boost.
+Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
+
+Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
+
+//Path to a file.
+Boost_INCLUDE_DIR:PATH=/usr/include
+
+Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
+
+Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
+
+Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
+
+Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
+
+Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
+
+Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
+
+Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
+
+//Path to a program.
+CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
+
+//Path to a program.
+CMAKE_AR:FILEPATH=/usr/bin/ar
+
+//Choose the type of build, options are: None Debug Release RelWithDebInfo
+// MinSizeRel ...
+CMAKE_BUILD_TYPE:STRING=Debug
+
+//Enable colored diagnostics throughout.
+CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
+
+//CXX compiler
+CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the CXX compiler during all build types.
+CMAKE_CXX_FLAGS:STRING=
+
+//Flags used by the CXX compiler during DEBUG builds.
+CMAKE_CXX_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the CXX compiler during MINSIZEREL builds.
+CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the CXX compiler during RELEASE builds.
+CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the CXX compiler during RELWITHDEBINFO builds.
+CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//C compiler
+CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the C compiler during all build types.
+CMAKE_C_FLAGS:STRING=
+
+//Flags used by the C compiler during DEBUG builds.
+CMAKE_C_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the C compiler during MINSIZEREL builds.
+CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the C compiler during RELEASE builds.
+CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the C compiler during RELWITHDEBINFO builds.
+CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//Path to a program.
+CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
+
+//Flags used by the linker during all build types.
+CMAKE_EXE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during DEBUG builds.
+CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during MINSIZEREL builds.
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during RELEASE builds.
+CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during RELWITHDEBINFO builds.
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Enable/Disable output of compile commands during generation.
+CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
+
+//Value Computed by CMake.
+CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
+
+//User executables (bin)
+CMAKE_INSTALL_BINDIR:PATH=bin
+
+//Read-only architecture-independent data (DATAROOTDIR)
+CMAKE_INSTALL_DATADIR:PATH=
+
+//Read-only architecture-independent data root (share)
+CMAKE_INSTALL_DATAROOTDIR:PATH=share
+
+//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
+CMAKE_INSTALL_DOCDIR:PATH=
+
+//C header files (include)
+CMAKE_INSTALL_INCLUDEDIR:PATH=include
+
+//Info documentation (DATAROOTDIR/info)
+CMAKE_INSTALL_INFODIR:PATH=
+
+//Object code libraries (lib)
+CMAKE_INSTALL_LIBDIR:PATH=lib
+
+//Program executables (libexec)
+CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
+
+//Locale-dependent data (DATAROOTDIR/locale)
+CMAKE_INSTALL_LOCALEDIR:PATH=
+
+//Modifiable single-machine data (var)
+CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
+
+//Man documentation (DATAROOTDIR/man)
+CMAKE_INSTALL_MANDIR:PATH=
+
+//C header files for non-gcc (/usr/include)
+CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
+
+//Install path prefix, prepended onto install directories.
+CMAKE_INSTALL_PREFIX:PATH=/usr/local
+
+//Run-time variable data (LOCALSTATEDIR/run)
+CMAKE_INSTALL_RUNSTATEDIR:PATH=
+
+//System admin executables (sbin)
+CMAKE_INSTALL_SBINDIR:PATH=sbin
+
+//Modifiable architecture-independent data (com)
+CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
+
+//Read-only single-machine data (etc)
+CMAKE_INSTALL_SYSCONFDIR:PATH=etc
+
+//Path to a program.
+CMAKE_LINKER:FILEPATH=/usr/bin/ld
+
+//No help, variable specified on the command line.
+CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+
+//Flags used by the linker during the creation of modules during
+// all build types.
+CMAKE_MODULE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of modules during
+// DEBUG builds.
+CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of modules during
+// MINSIZEREL builds.
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELEASE builds.
+CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELWITHDEBINFO builds.
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_NM:FILEPATH=/usr/bin/nm
+
+//Path to a program.
+CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
+
+//Path to a program.
+CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
+
+//Value Computed by CMake
+CMAKE_PROJECT_DESCRIPTION:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
+
+//Path to a program.
+CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
+
+//Path to a program.
+CMAKE_READELF:FILEPATH=/usr/bin/readelf
+
+//Flags used by the linker during the creation of shared libraries
+// during all build types.
+CMAKE_SHARED_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during DEBUG builds.
+CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during MINSIZEREL builds.
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELEASE builds.
+CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELWITHDEBINFO builds.
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//If set, runtime paths are not added when installing shared libraries,
+// but are added when building.
+CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
+
+//If set, runtime paths are not added when using shared libraries.
+CMAKE_SKIP_RPATH:BOOL=NO
+
+//Flags used by the linker during the creation of static libraries
+// during all build types.
+CMAKE_STATIC_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during DEBUG builds.
+CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during MINSIZEREL builds.
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELEASE builds.
+CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELWITHDEBINFO builds.
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_STRIP:FILEPATH=/usr/bin/strip
+
+//Path to a program.
+CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
+
+//If this value is on, makefiles will be generated without the
+// .SILENT directive, and all commands will be echoed to the console
+// during the make.  This is useful for debugging only. With Visual
+// Studio IDE projects all commands are done without /nologo.
+CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
+
+//Path to a file.
+CURL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
+
+//Path to a file.
+DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
+
+//Path to a file.
+DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
+
+//Path to a library.
+DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a file.
+EIGEN3_INCLUDE_DIR:PATH=EIGEN3_INCLUDE_DIR-NOTFOUND
+
+//Path to a file.
+EXPAT_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a file.
+GLEW_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
+
+//Path to a file.
+OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
+
+//Path to a library.
+OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
+
+//Path to a library.
+OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
+
+//Path to a library.
+OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
+
+//Path to a library.
+OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
+
+//Path to a file.
+OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
+
+//Path to a library.
+OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a file.
+OPENSSL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
+
+//Path to OpenVDB installation's find modules.
+OPENVDB_FIND_MODULE_PATH:PATH=
+
+//Build Orca tools
+ORCA_TOOLS:BOOL=OFF
+
+//Value Computed by CMake
+OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+
+//Value Computed by CMake
+OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
+
+//Value Computed by CMake
+OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
+
+//Arguments to supply to pkg-config
+PKG_CONFIG_ARGN:STRING=
+
+//pkg-config executable
+PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
+
+//Path to a library.
+PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
+
+//Path to a file.
+PNG_PNG_INCLUDE_DIR:PATH=/usr/include
+
+//Enable ASan on Clang and GCC
+SLIC3R_ASAN:BOOL=OFF
+
+//Build development sandboxes
+SLIC3R_BUILD_SANDBOXES:BOOL=OFF
+
+//Build unit tests
+SLIC3R_BUILD_TESTS:BOOL=OFF
+
+//Allow perfoming desktop integration during runtime
+SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
+
+//Assume OrcaSlicer is to be installed in a FHS directory structure
+SLIC3R_FHS:BOOL=OFF
+
+//GTK version to use with wxWidgets on Linux
+SLIC3R_GTK:STRING=2
+
+//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
+SLIC3R_GUI:BOOL=ON
+
+//Compile on Visual Studio in parallel
+SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
+
+//Generate PDB files on MSVC in Release mode
+SLIC3R_MSVC_PDB:BOOL=ON
+
+//Use precompiled headers
+SLIC3R_PCH:BOOL=ON
+
+//Compile XS Perl module and enable Perl unit and integration tests
+SLIC3R_PERL_XS:BOOL=OFF
+
+//Compile OrcaSlicer with an invasive Shiny profiler
+SLIC3R_PROFILE:BOOL=OFF
+
+//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
+SLIC3R_STATIC:BOOL=OFF
+
+//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
+// Linux
+SLIC3R_WX_STABLE:BOOL=OFF
+
+//The directory containing a CMake configuration file for TBB.
+TBB_DIR:PATH=/usr/lib/cmake/TBB
+
+//Path to a file.
+ZLIB_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
+
+//The directory containing a CMake configuration file for boost_atomic.
+boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
+
+//The directory containing a CMake configuration file for boost_chrono.
+boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
+
+//The directory containing a CMake configuration file for boost_date_time.
+boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
+
+//The directory containing a CMake configuration file for boost_filesystem.
+boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
+
+//The directory containing a CMake configuration file for boost_headers.
+boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
+
+//The directory containing a CMake configuration file for boost_iostreams.
+boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
+
+//The directory containing a CMake configuration file for boost_locale.
+boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
+
+//The directory containing a CMake configuration file for boost_log.
+boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
+
+//The directory containing a CMake configuration file for boost_program_options.
+boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
+
+//The directory containing a CMake configuration file for boost_regex.
+boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
+
+//The directory containing a CMake configuration file for boost_system.
+boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
+
+//The directory containing a CMake configuration file for boost_thread.
+boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
+
+//The directory containing a CMake configuration file for cereal.
+cereal_DIR:PATH=cereal_DIR-NOTFOUND
+
+//The directory containing a CMake configuration file for glfw3.
+glfw3_DIR:PATH=/usr/lib/cmake/glfw3
+
+//Path to a library.
+pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a library.
+pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
+
+
+########################
+# INTERNAL cache entries
+########################
+
+//ADVANCED property for variable: Boost_DIR
+Boost_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_ADDR2LINE
+CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_AR
+CMAKE_AR-ADVANCED:INTERNAL=1
+//This is the directory where this CMakeCache.txt was created
+CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+//Major version of cmake used to create the current loaded cache
+CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
+//Minor version of cmake used to create the current loaded cache
+CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
+//Patch version of cmake used to create the current loaded cache
+CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
+//Path to CMake executable.
+CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+//Path to cpack program executable.
+CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
+//Path to ctest program executable.
+CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
+//ADVANCED property for variable: CMAKE_CXX_COMPILER
+CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
+CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
+CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS
+CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
+CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
+CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
+CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
+CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER
+CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_AR
+CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
+CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS
+CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
+CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
+CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
+CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
+CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_DLLTOOL
+CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
+//Executable file format
+CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
+CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
+CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
+CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
+CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
+//Name of external makefile project generator.
+CMAKE_EXTRA_GENERATOR:INTERNAL=
+//Name of generator.
+CMAKE_GENERATOR:INTERNAL=Ninja
+//Generator instance identifier.
+CMAKE_GENERATOR_INSTANCE:INTERNAL=
+//Name of generator platform.
+CMAKE_GENERATOR_PLATFORM:INTERNAL=
+//Name of generator toolset.
+CMAKE_GENERATOR_TOOLSET:INTERNAL=
+//Test CMAKE_HAVE_LIBC_PTHREAD
+CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
+//Source directory with the top level CMakeLists.txt file for this
+// project
+CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
+//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
+CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
+CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
+CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
+CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
+CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
+CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
+CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
+CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
+CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
+CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
+CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
+CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
+CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
+CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
+CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
+//Install .so files without execute permission.
+CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
+//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
+CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_LINKER
+CMAKE_LINKER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
+CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
+CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
+CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_NM
+CMAKE_NM-ADVANCED:INTERNAL=1
+//number of local generators
+CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJCOPY
+CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJDUMP
+CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
+//Platform information initialized
+CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_RANLIB
+CMAKE_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_READELF
+CMAKE_READELF-ADVANCED:INTERNAL=1
+//Path to CMake installation.
+CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
+CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
+CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
+CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
+CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_RPATH
+CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
+CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
+CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
+CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STRIP
+CMAKE_STRIP-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_TAPI
+CMAKE_TAPI-ADVANCED:INTERNAL=1
+//uname command
+CMAKE_UNAME:INTERNAL=/usr/bin/uname
+//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
+CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_INCLUDE_DIR
+CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_DEBUG
+CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_RELEASE
+CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
+EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_INCLUDE_DIR
+EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
+EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
+EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Details about finding Boost
+FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
+//Details about finding CURL
+FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.0()]
+//Details about finding DBus
+FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
+//Details about finding EXPAT
+FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
+//Details about finding GLEW
+FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
+//Details about finding OpenGL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
+//Details about finding OpenSSL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
+//Details about finding PNG
+FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
+//Details about finding PkgConfig
+FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.1.1()]
+//Details about finding Threads
+FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
+//Details about finding ZLIB
+FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
+//ADVANCED property for variable: GLEW_INCLUDE_DIR
+GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
+GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
+GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
+GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
+GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Have include cereal/cereal.hpp
+HAVE_CEREAL_H:INTERNAL=
+//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
+OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
+OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
+OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
+OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
+OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_INCLUDE_DIR
+OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_egl_LIBRARY
+OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gl_LIBRARY
+OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles2_LIBRARY
+OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles3_LIBRARY
+OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glu_LIBRARY
+OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glx_LIBRARY
+OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_opengl_LIBRARY
+OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
+OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
+OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
+OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
+OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
+PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_CFLAGS_I:INTERNAL=
+PC_DBUS_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_FOUND:INTERNAL=1
+PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
+PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
+PC_DBUS_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_LIBDIR:INTERNAL=/usr/lib
+PC_DBUS_LIBRARIES:INTERNAL=dbus-1
+PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_LIBS:INTERNAL=
+PC_DBUS_LIBS_L:INTERNAL=
+PC_DBUS_LIBS_OTHER:INTERNAL=
+PC_DBUS_LIBS_PATHS:INTERNAL=
+PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
+PC_DBUS_PREFIX:INTERNAL=/usr
+PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
+PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
+PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBDIR:INTERNAL=
+PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
+PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_STATIC_LIBS:INTERNAL=
+PC_DBUS_STATIC_LIBS_L:INTERNAL=
+PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
+PC_DBUS_VERSION:INTERNAL=1.14.10
+PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
+PC_DBUS_dbus-1_LIBDIR:INTERNAL=
+PC_DBUS_dbus-1_PREFIX:INTERNAL=
+PC_DBUS_dbus-1_VERSION:INTERNAL=
+PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
+PC_EXPAT_CFLAGS_I:INTERNAL=
+PC_EXPAT_CFLAGS_OTHER:INTERNAL=
+PC_EXPAT_FOUND:INTERNAL=1
+PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
+PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
+PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
+PC_EXPAT_LIBRARIES:INTERNAL=expat
+PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_LIBS:INTERNAL=
+PC_EXPAT_LIBS_L:INTERNAL=
+PC_EXPAT_LIBS_OTHER:INTERNAL=
+PC_EXPAT_LIBS_PATHS:INTERNAL=
+PC_EXPAT_MODULE_NAME:INTERNAL=expat
+PC_EXPAT_PREFIX:INTERNAL=/usr
+PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
+PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
+PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
+PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
+PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBDIR:INTERNAL=
+PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
+PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_STATIC_LIBS:INTERNAL=
+PC_EXPAT_STATIC_LIBS_L:INTERNAL=
+PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
+PC_EXPAT_VERSION:INTERNAL=2.6.4
+PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
+PC_EXPAT_expat_LIBDIR:INTERNAL=
+PC_EXPAT_expat_PREFIX:INTERNAL=
+PC_EXPAT_expat_VERSION:INTERNAL=
+//ADVANCED property for variable: PKG_CONFIG_ARGN
+PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
+PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_DEBUG
+PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_RELEASE
+PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
+PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_INCLUDE_DIR
+ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
+ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
+ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//linker supports push/pop state
+_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
+//CMAKE_INSTALL_PREFIX during last run
+_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
+_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_CFLAGS_I:INTERNAL=
+_OPENSSL_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_FOUND:INTERNAL=1
+_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
+_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
+_OPENSSL_LDFLAGS_OTHER:INTERNAL=
+_OPENSSL_LIBDIR:INTERNAL=/usr/lib
+_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
+_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_LIBS:INTERNAL=
+_OPENSSL_LIBS_L:INTERNAL=
+_OPENSSL_LIBS_OTHER:INTERNAL=
+_OPENSSL_LIBS_PATHS:INTERNAL=
+_OPENSSL_MODULE_NAME:INTERNAL=openssl
+_OPENSSL_PREFIX:INTERNAL=/usr
+_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
+_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread;-L/usr/lib;-lcrypto;-ldl;-pthread
+_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread;-pthread
+_OPENSSL_STATIC_LIBDIR:INTERNAL=
+_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl;crypto;dl
+_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib;/usr/lib
+_OPENSSL_STATIC_LIBS:INTERNAL=
+_OPENSSL_STATIC_LIBS_L:INTERNAL=
+_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
+_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
+_OPENSSL_VERSION:INTERNAL=3.4.0
+_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
+_OPENSSL_openssl_LIBDIR:INTERNAL=
+_OPENSSL_openssl_PREFIX:INTERNAL=
+_OPENSSL_openssl_VERSION:INTERNAL=
+__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
+__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
+__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
+__pkg_config_checked_PC_DBUS:INTERNAL=1
+__pkg_config_checked_PC_EXPAT:INTERNAL=1
+__pkg_config_checked__OPENSSL:INTERNAL=1
+//ADVANCED property for variable: boost_atomic_DIR
+boost_atomic_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_chrono_DIR
+boost_chrono_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_date_time_DIR
+boost_date_time_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_filesystem_DIR
+boost_filesystem_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_headers_DIR
+boost_headers_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_iostreams_DIR
+boost_iostreams_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_locale_DIR
+boost_locale_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_log_DIR
+boost_log_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_program_options_DIR
+boost_program_options_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_regex_DIR
+boost_regex_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_system_DIR
+boost_system_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_thread_DIR
+boost_thread_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
+pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
+pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
+pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
+pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
+prefix_result:INTERNAL=/usr/lib
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
new file mode 100644
index 00000000000..d69cb8dd938
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
@@ -0,0 +1,81 @@
+set(CMAKE_C_COMPILER "/usr/bin/cc")
+set(CMAKE_C_COMPILER_ARG1 "")
+set(CMAKE_C_COMPILER_ID "GNU")
+set(CMAKE_C_COMPILER_VERSION "14.2.1")
+set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_C_COMPILER_WRAPPER "")
+set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_C_STANDARD_LATEST "23")
+set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
+set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
+set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
+set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
+set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
+set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
+
+set(CMAKE_C_PLATFORM_ID "Linux")
+set(CMAKE_C_SIMULATE_ID "")
+set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_C_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_C_COMPILER_LINKER_ID "GNU")
+set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCC 1)
+set(CMAKE_C_COMPILER_LOADED 1)
+set(CMAKE_C_COMPILER_WORKS TRUE)
+set(CMAKE_C_ABI_COMPILED TRUE)
+
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
+
+set(CMAKE_C_COMPILER_ID_RUN 1)
+set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
+set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_C_LINKER_PREFERENCE 10)
+set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_C_SIZEOF_DATA_PTR "8")
+set(CMAKE_C_COMPILER_ABI "ELF")
+set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_C_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_C_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
+endif()
+
+if(CMAKE_C_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
+set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
new file mode 100644
index 00000000000..7a492576727
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
@@ -0,0 +1,105 @@
+set(CMAKE_CXX_COMPILER "/usr/bin/c++")
+set(CMAKE_CXX_COMPILER_ARG1 "")
+set(CMAKE_CXX_COMPILER_ID "GNU")
+set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
+set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_CXX_COMPILER_WRAPPER "")
+set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_CXX_STANDARD_LATEST "26")
+set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
+set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
+set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
+set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
+set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
+set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
+set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
+set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
+
+set(CMAKE_CXX_PLATFORM_ID "Linux")
+set(CMAKE_CXX_SIMULATE_ID "")
+set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_CXX_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
+set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCXX 1)
+set(CMAKE_CXX_COMPILER_LOADED 1)
+set(CMAKE_CXX_COMPILER_WORKS TRUE)
+set(CMAKE_CXX_ABI_COMPILED TRUE)
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
+
+set(CMAKE_CXX_COMPILER_ID_RUN 1)
+set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
+set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
+
+foreach (lang IN ITEMS C OBJC OBJCXX)
+  if (CMAKE_${lang}_COMPILER_ID_RUN)
+    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
+      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
+    endforeach()
+  endif()
+endforeach()
+
+set(CMAKE_CXX_LINKER_PREFERENCE 30)
+set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
+set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
+set(CMAKE_CXX_COMPILER_ABI "ELF")
+set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_CXX_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
+endif()
+
+if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
+set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
+set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
+
+set(CMAKE_CXX_COMPILER_IMPORT_STD "")
+### Imported target for C++23 standard library
+set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+### Imported target for C++26 standard library
+set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
new file mode 100755
index 0000000000000000000000000000000000000000..6f4e7c0e50420bf30feec79c4ad403f23f067405
GIT binary patch
literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
new file mode 100755
index 0000000000000000000000000000000000000000..66c99e8612cf056b64d38a16057ec51886004a16
GIT binary patch
literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
new file mode 100644
index 00000000000..b0b76c86f9e
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
@@ -0,0 +1,15 @@
+set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_NAME "Linux")
+set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
+
+
+
+set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_NAME "Linux")
+set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_PROCESSOR "x86_64")
+
+set(CMAKE_CROSSCOMPILING "FALSE")
+
+set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
new file mode 100644
index 00000000000..8d8bb038bb3
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
@@ -0,0 +1,904 @@
+#ifdef __cplusplus
+# error "A C++ compiler has been selected for C."
+#endif
+
+#if defined(__18CXX)
+# define ID_VOID_MAIN
+#endif
+#if defined(__CLASSIC_C__)
+/* cv-qualifiers did not exist in K&R C */
+# define const
+# define volatile
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_C)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_C >= 0x5100
+   /* __SUNPRO_C = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# endif
+
+#elif defined(__HP_cc)
+# define COMPILER_ID "HP"
+  /* __HP_cc = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
+
+#elif defined(__DECC)
+# define COMPILER_ID "Compaq"
+  /* __DECC_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
+
+#elif defined(__IBMC__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__TINYC__)
+# define COMPILER_ID "TinyCC"
+
+#elif defined(__BCC__)
+# define COMPILER_ID "Bruce"
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__)
+# define COMPILER_ID "GNU"
+# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
+# define COMPILER_ID "SDCC"
+# if defined(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
+#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
+# else
+  /* SDCC = VRP */
+#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
+#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define C_STD_99 199901L
+#define C_STD_11 201112L
+#define C_STD_17 201710L
+#define C_STD_23 202311L
+
+#ifdef __STDC_VERSION__
+#  define C_STD __STDC_VERSION__
+#endif
+
+#if !defined(__STDC__) && !defined(__clang__)
+# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
+#  define C_VERSION "90"
+# else
+#  define C_VERSION
+# endif
+#elif C_STD > C_STD_17
+# define C_VERSION "23"
+#elif C_STD > C_STD_11
+# define C_VERSION "17"
+#elif C_STD > C_STD_99
+# define C_VERSION "11"
+#elif C_STD >= C_STD_99
+# define C_VERSION "99"
+#else
+# define C_VERSION "90"
+#endif
+const char* info_language_standard_default =
+  "INFO" ":" "standard_default[" C_VERSION "]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef ID_VOID_MAIN
+void main() {}
+#else
+# if defined(__CLASSIC_C__)
+int main(argc, argv) int argc; char *argv[];
+# else
+int main(int argc, char* argv[])
+# endif
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
+#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..37746a787a5774e617e8abfcaacf5381d6be0900
GIT binary patch
literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
new file mode 100644
index 00000000000..da6c824af3a
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
@@ -0,0 +1,919 @@
+/* This source file must have a .cpp extension so that all C++ compilers
+   recognize the extension without flags.  Borland does not know .cxx for
+   example.  */
+#ifndef __cplusplus
+# error "A C compiler has been selected for C++."
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_CC)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_CC >= 0x5100
+   /* __SUNPRO_CC = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# endif
+
+#elif defined(__HP_aCC)
+# define COMPILER_ID "HP"
+  /* __HP_aCC = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
+
+#elif defined(__DECCXX)
+# define COMPILER_ID "Compaq"
+  /* __DECCXX_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
+
+#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__) || defined(__GNUG__)
+# define COMPILER_ID "GNU"
+# if defined(__GNUC__)
+#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define CXX_STD_98 199711L
+#define CXX_STD_11 201103L
+#define CXX_STD_14 201402L
+#define CXX_STD_17 201703L
+#define CXX_STD_20 202002L
+#define CXX_STD_23 202302L
+
+#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > CXX_STD_17
+#    define CXX_STD _MSVC_LANG
+#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14
+#    define CXX_STD CXX_STD_17
+#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  elif defined(__INTEL_CXX11_MODE__)
+#    define CXX_STD CXX_STD_11
+#  else
+#    define CXX_STD CXX_STD_98
+#  endif
+#elif defined(_MSC_VER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > __cplusplus
+#    define CXX_STD _MSVC_LANG
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__NVCOMPILER)
+#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__INTEL_COMPILER) || defined(__PGI)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
+#    define CXX_STD CXX_STD_17
+#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
+#  define CXX_STD CXX_STD_11
+#else
+#  define CXX_STD __cplusplus
+#endif
+
+const char* info_language_standard_default = "INFO" ":" "standard_default["
+#if CXX_STD > CXX_STD_23
+  "26"
+#elif CXX_STD > CXX_STD_20
+  "23"
+#elif CXX_STD > CXX_STD_17
+  "20"
+#elif CXX_STD > CXX_STD_14
+  "17"
+#elif CXX_STD > CXX_STD_11
+  "14"
+#elif CXX_STD >= CXX_STD_11
+  "11"
+#else
+  "98"
+#endif
+"]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..78617c271080d9e2231a72abde01b7fc302df0f2
GIT binary patch
literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
new file mode 100644
index 00000000000..ea990e46285
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
@@ -0,0 +1,562 @@
+
+---
+events:
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
+      Compiler: /usr/bin/cc 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
+      
+      The C compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
+      Compiler: /usr/bin/c++ 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
+      
+      The CXX compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
+      
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting C compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_C_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1
+        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s
+        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
+         as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.'
+        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1]
+        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s]
+        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.']
+        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/ccURuGYB.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_332c1] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o] ==> ignore
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [-lc] ==> lib [c]
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'C': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the C compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting CXX compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: ""
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_CXX_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e
+        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s
+        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
+         as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.'
+        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e]
+        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s]
+        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.']
+        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/cczdPYYx.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_1c87e] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
+          arg [-lstdc++] ==> lib [stdc++]
+          arg [-lm] ==> lib [m]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [-lc] ==> lib [c]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'CXX': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
+      - "CMakeLists.txt:235 (find_package)"
+    checks:
+      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "CMAKE_HAVE_LIBC_PTHREAD"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_55d55
+        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_55d55.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh/src.c
+        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_55d55.dir/src.c.o -o cmTC_55d55   && :
+        
+      exitCode: 0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
+      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
+      - "CMakeLists.txt:544 (find_package)"
+    checks:
+      - "Looking for C++ include cereal/cereal.hpp"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "HAVE_CEREAL_H"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_d484c
+        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
+        FAILED: CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o 
+        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
+            1 | #include <cereal/cereal.hpp>
+              |          ^~~~~~~~~~~~~~~~~~~
+        compilation terminated.
+        ninja: build stopped: subcommand failed.
+        
+      exitCode: 1
+...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
new file mode 100644
index 00000000000..380b8a715f2
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
@@ -0,0 +1,66 @@
+/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+-- The C compiler identification is GNU 14.2.1
+-- The CXX compiler identification is GNU 14.2.1
+-- Detecting C compiler ABI info
+-- Detecting C compiler ABI info - done
+-- Check for working C compiler: /usr/bin/cc - skipped
+-- Detecting C compile features
+-- Detecting C compile features - done
+-- Detecting CXX compiler ABI info
+-- Detecting CXX compiler ABI info - done
+-- Check for working CXX compiler: /usr/bin/c++ - skipped
+-- Detecting CXX compile features
+-- Detecting CXX compile features - done
+-- SLIC3R_ASAN: OFF
+-- SLIC3R_BUILD_SANDBOXES: OFF
+-- SLIC3R_BUILD_TESTS: OFF
+-- SLIC3R_DESKTOP_INTEGRATION: ON
+-- SLIC3R_FHS: OFF
+-- SLIC3R_GTK: 2
+-- SLIC3R_GUI: ON
+-- SLIC3R_MSVC_COMPILE_PARALLEL: ON
+-- SLIC3R_MSVC_PDB: ON
+-- SLIC3R_PCH: ON
+-- SLIC3R_PERL_XS: OFF
+-- SLIC3R_PROFILE: OFF
+-- SLIC3R_STATIC: OFF
+-- SLIC3R_WX_STABLE: OFF
+-- SLIC3R_STATIC: OFF
+-- CMAKE_PREFIX_PATH: (default)
+-- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
+-- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
+-- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.1")
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
+-- Found Threads: TRUE
+-- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+-- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
+-- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
+CMake Warning (dev) at CMakeLists.txt:415 (find_package):
+  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
+  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
+  set the policy and suppress this warning.
+
+This warning is for project developers.  Use -Wno-dev to suppress it.
+
+-- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
+-- TBB found in /usr/lib/cmake/TBB
+-- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
+-- Found CURL: /usr/lib/libcurl.so (found version "8.11.0") 
+-- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
+-- Could NOT find Eigen3 (missing: EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK) (Required is at least version "3.3")
+-- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
+-- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
+-- Found OpenGL: /usr/lib/libOpenGL.so
+GLEW_ROOT: 
+-- Found GLEW: /usr/include (found version "2.2.0")
+-- Could NOT find cereal (missing: cereal_DIR)
+-- Looking for C++ include cereal/cereal.hpp
+-- Looking for C++ include cereal/cereal.hpp - not found
+CMake Error at cmake/modules/Findcereal.cmake:21 (message):
+  Cereal library not found.  Please install the dependency.
+Call Stack (most recent call first):
+  CMakeLists.txt:544 (find_package)
+
+
+-- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
new file mode 100644
index 00000000000..292290e6b02
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-environment.txt
@@ -0,0 +1,4 @@
+ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+Options: 
+
+Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
new file mode 100644
index 00000000000..3dccd731726
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/cmake.check_cache
@@ -0,0 +1 @@
+# This file is generated by cmake for dependency checking of the CMakeCache.txt file
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 7da1749debc..c8fdc74220b 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.09.00.23",
+    "version": "01.10.00.26",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
@@ -673,10 +673,6 @@
             "name": "fdm_filament_bvoh",
             "sub_path": "filament/fdm_filament_bvoh.json"
         },
-        {
-          "name": "fdm_filament_sbs",
-          "sub_path": "filament/fdm_filament_sbs.json"
-        },
         {
             "name": "Bambu PLA Matte @base",
             "sub_path": "filament/Bambu PLA Matte @base.json"
@@ -737,10 +733,6 @@
             "name": "Generic PLA-CF @base",
             "sub_path": "filament/Generic PLA-CF @base.json"
         },
-        {
-          "name": "Generic SBS @base",
-          "sub_path": "filament/Generic SBS @base.json"
-        },
         {
             "name": "Bambu PLA-CF @base",
             "sub_path": "filament/Bambu PLA-CF @base.json"
@@ -797,6 +789,14 @@
             "name": "Bambu TPU 95A HF @base",
             "sub_path": "filament/Bambu TPU 95A HF @base.json"
         },
+        {
+            "name": "Generic TPU for AMS @base",
+            "sub_path": "filament/Generic TPU for AMS @base.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @base",
+            "sub_path": "filament/Bambu TPU for AMS @base.json"
+        },
         {
             "name": "Bambu PETG Basic @base",
             "sub_path": "filament/Bambu PETG Basic @base.json"
@@ -833,6 +833,22 @@
             "name": "Bambu PETG HF @base",
             "sub_path": "filament/Bambu PETG HF @base.json"
         },
+        {
+            "name": "Fiberon PETG-ESD @base",
+            "sub_path": "filament/Fiberon PETG-ESD @base.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @base",
+            "sub_path": "filament/Fiberon PETG-rCF @base.json"
+        },
+        {
+            "name": "Fiberon PET-CF @base",
+            "sub_path": "filament/Fiberon PET-CF @base.json"
+        },
+        {
+            "name": "Generic PETG HF @base",
+            "sub_path": "filament/Generic PETG HF @base.json"
+        },
         {
             "name": "Bambu ABS @base",
             "sub_path": "filament/Bambu ABS @base.json"
@@ -877,6 +893,10 @@
             "name": "Bambu ASA-Aero @base",
             "sub_path": "filament/Bambu ASA-Aero @base.json"
         },
+        {
+            "name": "Bambu ASA-CF @base",
+            "sub_path": "filament/Bambu ASA-CF @base.json"
+        },
         {
             "name": "Generic PVA @base",
             "sub_path": "filament/Generic PVA @base.json"
@@ -925,6 +945,22 @@
             "name": "Bambu PA6-GF @base",
             "sub_path": "filament/Bambu PA6-GF @base.json"
         },
+        {
+            "name": "Fiberon PA6-CF @base",
+            "sub_path": "filament/Fiberon PA6-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @base",
+            "sub_path": "filament/Fiberon PA6-GF @base.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @base",
+            "sub_path": "filament/Fiberon PA12-CF @base.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @base",
+            "sub_path": "filament/Fiberon PA612-CF @base.json"
+        },
         {
             "name": "Generic HIPS @base",
             "sub_path": "filament/Generic HIPS @base.json"
@@ -1405,10 +1441,6 @@
             "name": "Generic PLA-CF @BBL A1",
             "sub_path": "filament/Generic PLA-CF @BBL A1.json"
         },
-        {
-          "name": "Generic SBS",
-          "sub_path": "filament/Generic SBS.json"
-        },
         {
             "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json"
@@ -1745,6 +1777,38 @@
             "name": "Bambu TPU 95A HF @BBL A1",
             "sub_path": "filament/Bambu TPU 95A HF @BBL A1.json"
         },
+        {
+            "name": "Generic TPU for AMS @BBL X1C",
+            "sub_path": "filament/Generic TPU for AMS @BBL X1C.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL P1P",
+            "sub_path": "filament/Generic TPU for AMS @BBL P1P.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL A1",
+            "sub_path": "filament/Generic TPU for AMS @BBL A1.json"
+        },
+        {
+            "name": "Generic TPU for AMS @BBL A1M",
+            "sub_path": "filament/Generic TPU for AMS @BBL A1M.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL X1C",
+            "sub_path": "filament/Bambu TPU for AMS @BBL X1C.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL P1P",
+            "sub_path": "filament/Bambu TPU for AMS @BBL P1P.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL A1",
+            "sub_path": "filament/Bambu TPU for AMS @BBL A1.json"
+        },
+        {
+            "name": "Bambu TPU for AMS @BBL A1M",
+            "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json"
+        },
         {
             "name": "Bambu PETG Basic @BBL X1C",
             "sub_path": "filament/Bambu PETG Basic @BBL X1C.json"
@@ -1945,6 +2009,50 @@
             "name": "Generic PCTG @BBL A1M",
             "sub_path": "filament/Generic PCTG @BBL A1M.json"
         },
+        {
+            "name": "Fiberon PETG-ESD @BBL X1C",
+            "sub_path": "filament/Fiberon PETG-ESD @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PETG-rCF @BBL X1C",
+            "sub_path": "filament/Fiberon PETG-rCF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PET-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PET-CF @BBL X1C.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL X1C",
+            "sub_path": "filament/Generic PETG HF @BBL X1C.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL X1C 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL X1C 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL P1P",
+            "sub_path": "filament/Generic PETG HF @BBL P1P.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL P1P 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL P1P 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1",
+            "sub_path": "filament/Generic PETG HF @BBL A1.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL A1 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1M",
+            "sub_path": "filament/Generic PETG HF @BBL A1M.json"
+        },
+        {
+            "name": "Generic PETG HF @BBL A1M 0.2 nozzle",
+            "sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json"
+        },
         {
             "name": "Bambu ABS @BBL X1C",
             "sub_path": "filament/Bambu ABS @BBL X1C.json"
@@ -2173,6 +2281,30 @@
             "name": "Bambu ASA-Aero @BBL A1",
             "sub_path": "filament/Bambu ASA-Aero @BBL A1.json"
         },
+        {
+            "name": "Bambu ASA-CF @BBL X1C",
+            "sub_path": "filament/Bambu ASA-CF @BBL X1C.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL P1P",
+            "sub_path": "filament/Bambu ASA-CF @BBL P1P.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL A1",
+            "sub_path": "filament/Bambu ASA-CF @BBL A1.json"
+        },
+        {
+            "name": "Bambu ASA-CF @BBL A1 0.6 nozzle",
+            "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json"
+        },
         {
             "name": "Generic PVA @0.2 nozzle",
             "sub_path": "filament/Generic PVA @0.2 nozzle.json"
@@ -2321,6 +2453,22 @@
             "name": "Bambu PA6-GF @BBL A1",
             "sub_path": "filament/Bambu PA6-GF @BBL A1.json"
         },
+        {
+            "name": "Fiberon PA6-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA6-CF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA6-GF @BBL X1C",
+            "sub_path": "filament/Fiberon PA6-GF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA12-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA12-CF @BBL X1C.json"
+        },
+        {
+            "name": "Fiberon PA612-CF @BBL X1C",
+            "sub_path": "filament/Fiberon PA612-CF @BBL X1C.json"
+        },
         {
             "name": "Generic HIPS @BBL X1C",
             "sub_path": "filament/Generic HIPS @BBL X1C.json"

From f5accdcaf380b089271c8f4c79caaefefc170514 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:56:10 +0100
Subject: [PATCH 24/59] fix: remove cmake-build-debug, idea

---
 .idea/.gitignore                              |   8 -
 .idea/OrcaSlicer.iml                          |   2 -
 .idea/codeStyles/Project.xml                  | 106 --
 .idea/codeStyles/codeStyleConfig.xml          |   5 -
 .idea/misc.xml                                |   7 -
 .idea/modules.xml                             |   8 -
 .idea/vcs.xml                                 |   6 -
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 957 ------------------
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 --
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 --
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 15448 -> 0 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 15464 -> 0 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 -
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 -----------------
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 15560 -> 0 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 -----------------
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 15576 -> 0 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ----------
 .../CMakeFiles/clion-Debug-log.txt            |  66 --
 .../CMakeFiles/clion-environment.txt          |   4 -
 .../CMakeFiles/cmake.check_cache              |   1 -
 25 files changed, 3756 deletions(-)
 delete mode 100644 .idea/.gitignore
 delete mode 100644 .idea/OrcaSlicer.iml
 delete mode 100644 .idea/codeStyles/Project.xml
 delete mode 100644 .idea/codeStyles/codeStyleConfig.xml
 delete mode 100644 .idea/misc.xml
 delete mode 100644 .idea/modules.xml
 delete mode 100644 .idea/vcs.xml
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 delete mode 100644 cmake-build-debug/CMakeCache.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/.gitignore b/.idea/.gitignore
deleted file mode 100644
index 13566b81b01..00000000000
--- a/.idea/.gitignore
+++ /dev/null
@@ -1,8 +0,0 @@
-# Default ignored files
-/shelf/
-/workspace.xml
-# Editor-based HTTP Client requests
-/httpRequests/
-# Datasource local storage ignored files
-/dataSources/
-/dataSources.local.xml
diff --git a/.idea/OrcaSlicer.iml b/.idea/OrcaSlicer.iml
deleted file mode 100644
index f08604bb65b..00000000000
--- a/.idea/OrcaSlicer.iml
+++ /dev/null
@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<module classpath="CMake" type="CPP_MODULE" version="4" />
\ No newline at end of file
diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
deleted file mode 100644
index 53162672047..00000000000
--- a/.idea/codeStyles/Project.xml
+++ /dev/null
@@ -1,106 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <RiderCodeStyleSettings>
-      <option name="/Default/CodeStyle/CodeFormatting/CppClangFormat/EnableClangFormatSupport/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/EditorConfig/EnableClangFormatSupport/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_BINARY_EXPRESSIONS_CHAIN/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_CALLS_CHAIN/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXPRESSION/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_FOR_STMT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTIPLE_DECLARATION/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_TERNARY/@EntryValue" value="ALIGN_ALL" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_CLASS_DEFINITION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_DECLARATIONS/@EntryValue" value="2" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_BLANK_LINES_IN_CODE/@EntryValue" value="2" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/KEEP_USER_LINEBREAKS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CASE_FROM_SWITCH/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_COMMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INT_ALIGN_EQ/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SIMPLE_BLOCK_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COMMA_IN_TEMPLATE_PARAMS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_SEMICOLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_SEMICOLON/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_UNARY_OPERATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_ARRAY_ACCESS_BRACKETS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_METHOD_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_INITIALIZER_BRACES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPECIAL_ELSE_IF_TREATMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_CAST_EXPRESSION_PARENTHESES/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_BINARY_OPSIGN/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_TERNARY_OPSIGNS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TYPE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/OTHER_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CASE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DECLARATION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_FUNCTION_DEFINITION/@EntryValue" value="1" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_WHILE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_ELSE_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_CATCH_ON_NEW_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_INDENTATION/@EntryValue" value="All" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_ARGUMENT/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_EXTENDS_LIST/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_PARAMETER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_ARGUMENT/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ALIGN_MULTILINE_TYPE_PARAMETER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BLANK_LINES_AROUND_DECLARATIONS/@EntryValue" value="0" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_ACCESS_SPECIFIERS_FROM_CLASS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_CLASS_MEMBERS_FROM_ACCESS_SPECIFIERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/LINE_BREAK_AFTER_COLON_IN_MEMBER_INITIALIZER_LISTS/@EntryValue" value="ON_SINGLE_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/MEMBER_INITIALIZER_LIST_STYLE/@EntryValue" value="DO_NOT_CHANGE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/PLACE_NAMESPACE_DEFINITIONS_ON_SAME_LINE/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_COLON_IN_BITFIELD_DECLARATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_EXTENDS_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_FOR_COLON/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_FOR_COLON/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_METHOD/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_PTR_IN_NESTED_DECLARATOR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBER/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_DATA_MEMBERS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_AFTER_REF_IN_METHOD/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_PTR_IN_METHOD/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_ABSTRACT_DECL/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBER/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_DATA_MEMBERS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_REF_IN_METHOD/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BEFORE_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_BETWEEN_CLOSING_ANGLE_BRACKETS_IN_TEMPLATE_ARGS/@EntryValue" value="true" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_ARGS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_TEMPLATE_PARAMS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_DECLARATION_PARENTHESES/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/SPACE_WITHIN_EMPTY_BLOCKS/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_INVOCATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_INVOCATION_RPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_AFTER_DECLARATION_LPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_BEFORE_DECLARATION_RPAR/@EntryValue" value="false" type="bool" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_ARGUMENTS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/WRAP_PARAMETERS_STYLE/@EntryValue" value="WRAP_IF_LONG" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/BREAK_TEMPLATE_DECLARATION/@EntryValue" value="LINE_BREAK" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/NAMESPACE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/FREE_BLOCK_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INVOCABLE_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/ANONYMOUS_METHOD_DECLARATION_BRACES/@EntryValue" value="END_OF_LINE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INITIALIZER_BRACES/@EntryValue" value="END_OF_LINE_NO_SPACE" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_STYLE/@EntryValue" value="Space" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/INDENT_SIZE/@EntryValue" value="4" type="int" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/CONTINUOUS_LINE_INDENT/@EntryValue" value="Double" type="string" />
-      <option name="/Default/CodeStyle/CodeFormatting/CppFormatting/TAB_WIDTH/@EntryValue" value="4" type="int" />
-    </RiderCodeStyleSettings>
-    <clangFormatSettings>
-      <option name="ENABLED" value="true" />
-    </clangFormatSettings>
-  </code_scheme>
-</component>
\ No newline at end of file
diff --git a/.idea/codeStyles/codeStyleConfig.xml b/.idea/codeStyles/codeStyleConfig.xml
deleted file mode 100644
index 79ee123c2b2..00000000000
--- a/.idea/codeStyles/codeStyleConfig.xml
+++ /dev/null
@@ -1,5 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <state>
-    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
-  </state>
-</component>
\ No newline at end of file
diff --git a/.idea/misc.xml b/.idea/misc.xml
deleted file mode 100644
index 0b76fe5109e..00000000000
--- a/.idea/misc.xml
+++ /dev/null
@@ -1,7 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="CMakePythonSetting">
-    <option name="pythonIntegrationState" value="YES" />
-  </component>
-  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
-</project>
\ No newline at end of file
diff --git a/.idea/modules.xml b/.idea/modules.xml
deleted file mode 100644
index b80725f1d91..00000000000
--- a/.idea/modules.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="ProjectModuleManager">
-    <modules>
-      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
-    </modules>
-  </component>
-</project>
\ No newline at end of file
diff --git a/.idea/vcs.xml b/.idea/vcs.xml
deleted file mode 100644
index 35eb1ddfbbc..00000000000
--- a/.idea/vcs.xml
+++ /dev/null
@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="VcsDirectoryMappings">
-    <mapping directory="" vcs="Git" />
-  </component>
-</project>
\ No newline at end of file
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
deleted file mode 100644
index 6a1c377b37b..00000000000
--- a/cmake-build-debug/CMakeCache.txt
+++ /dev/null
@@ -1,957 +0,0 @@
-# This is the CMakeCache file.
-# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
-# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-# You can edit this file to change values found and used by cmake.
-# If you do not want to change any of the values, simply exit the editor.
-# If you do want to change a value, simply edit, save, and exit the editor.
-# The syntax for the file is as follows:
-# KEY:TYPE=VALUE
-# KEY is the name of a variable in the cache.
-# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
-# VALUE is the current value for the KEY.
-
-########################
-# EXTERNAL cache entries
-########################
-
-Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
-
-Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
-
-Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
-
-//The directory containing a CMake configuration file for Boost.
-Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
-
-Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
-
-//Path to a file.
-Boost_INCLUDE_DIR:PATH=/usr/include
-
-Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
-
-Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
-
-Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
-
-Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
-
-Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
-
-Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
-
-Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
-
-//Path to a program.
-CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
-
-//Path to a program.
-CMAKE_AR:FILEPATH=/usr/bin/ar
-
-//Choose the type of build, options are: None Debug Release RelWithDebInfo
-// MinSizeRel ...
-CMAKE_BUILD_TYPE:STRING=Debug
-
-//Enable colored diagnostics throughout.
-CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
-
-//CXX compiler
-CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the CXX compiler during all build types.
-CMAKE_CXX_FLAGS:STRING=
-
-//Flags used by the CXX compiler during DEBUG builds.
-CMAKE_CXX_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the CXX compiler during MINSIZEREL builds.
-CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the CXX compiler during RELEASE builds.
-CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the CXX compiler during RELWITHDEBINFO builds.
-CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//C compiler
-CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the C compiler during all build types.
-CMAKE_C_FLAGS:STRING=
-
-//Flags used by the C compiler during DEBUG builds.
-CMAKE_C_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the C compiler during MINSIZEREL builds.
-CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the C compiler during RELEASE builds.
-CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the C compiler during RELWITHDEBINFO builds.
-CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//Path to a program.
-CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
-
-//Flags used by the linker during all build types.
-CMAKE_EXE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during DEBUG builds.
-CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during MINSIZEREL builds.
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during RELEASE builds.
-CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during RELWITHDEBINFO builds.
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Enable/Disable output of compile commands during generation.
-CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
-
-//Value Computed by CMake.
-CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
-
-//User executables (bin)
-CMAKE_INSTALL_BINDIR:PATH=bin
-
-//Read-only architecture-independent data (DATAROOTDIR)
-CMAKE_INSTALL_DATADIR:PATH=
-
-//Read-only architecture-independent data root (share)
-CMAKE_INSTALL_DATAROOTDIR:PATH=share
-
-//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
-CMAKE_INSTALL_DOCDIR:PATH=
-
-//C header files (include)
-CMAKE_INSTALL_INCLUDEDIR:PATH=include
-
-//Info documentation (DATAROOTDIR/info)
-CMAKE_INSTALL_INFODIR:PATH=
-
-//Object code libraries (lib)
-CMAKE_INSTALL_LIBDIR:PATH=lib
-
-//Program executables (libexec)
-CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
-
-//Locale-dependent data (DATAROOTDIR/locale)
-CMAKE_INSTALL_LOCALEDIR:PATH=
-
-//Modifiable single-machine data (var)
-CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
-
-//Man documentation (DATAROOTDIR/man)
-CMAKE_INSTALL_MANDIR:PATH=
-
-//C header files for non-gcc (/usr/include)
-CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
-
-//Install path prefix, prepended onto install directories.
-CMAKE_INSTALL_PREFIX:PATH=/usr/local
-
-//Run-time variable data (LOCALSTATEDIR/run)
-CMAKE_INSTALL_RUNSTATEDIR:PATH=
-
-//System admin executables (sbin)
-CMAKE_INSTALL_SBINDIR:PATH=sbin
-
-//Modifiable architecture-independent data (com)
-CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
-
-//Read-only single-machine data (etc)
-CMAKE_INSTALL_SYSCONFDIR:PATH=etc
-
-//Path to a program.
-CMAKE_LINKER:FILEPATH=/usr/bin/ld
-
-//No help, variable specified on the command line.
-CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-
-//Flags used by the linker during the creation of modules during
-// all build types.
-CMAKE_MODULE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of modules during
-// DEBUG builds.
-CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of modules during
-// MINSIZEREL builds.
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELEASE builds.
-CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELWITHDEBINFO builds.
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_NM:FILEPATH=/usr/bin/nm
-
-//Path to a program.
-CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
-
-//Path to a program.
-CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
-
-//Value Computed by CMake
-CMAKE_PROJECT_DESCRIPTION:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
-
-//Path to a program.
-CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
-
-//Path to a program.
-CMAKE_READELF:FILEPATH=/usr/bin/readelf
-
-//Flags used by the linker during the creation of shared libraries
-// during all build types.
-CMAKE_SHARED_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during DEBUG builds.
-CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during MINSIZEREL builds.
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELEASE builds.
-CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELWITHDEBINFO builds.
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//If set, runtime paths are not added when installing shared libraries,
-// but are added when building.
-CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
-
-//If set, runtime paths are not added when using shared libraries.
-CMAKE_SKIP_RPATH:BOOL=NO
-
-//Flags used by the linker during the creation of static libraries
-// during all build types.
-CMAKE_STATIC_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during DEBUG builds.
-CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during MINSIZEREL builds.
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELEASE builds.
-CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELWITHDEBINFO builds.
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_STRIP:FILEPATH=/usr/bin/strip
-
-//Path to a program.
-CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
-
-//If this value is on, makefiles will be generated without the
-// .SILENT directive, and all commands will be echoed to the console
-// during the make.  This is useful for debugging only. With Visual
-// Studio IDE projects all commands are done without /nologo.
-CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
-
-//Path to a file.
-CURL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
-
-//Path to a file.
-DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
-
-//Path to a file.
-DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
-
-//Path to a library.
-DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a file.
-EIGEN3_INCLUDE_DIR:PATH=EIGEN3_INCLUDE_DIR-NOTFOUND
-
-//Path to a file.
-EXPAT_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a file.
-GLEW_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
-
-//Path to a file.
-OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
-
-//Path to a library.
-OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
-
-//Path to a library.
-OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
-
-//Path to a library.
-OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
-
-//Path to a library.
-OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
-
-//Path to a file.
-OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
-
-//Path to a library.
-OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a file.
-OPENSSL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
-
-//Path to OpenVDB installation's find modules.
-OPENVDB_FIND_MODULE_PATH:PATH=
-
-//Build Orca tools
-ORCA_TOOLS:BOOL=OFF
-
-//Value Computed by CMake
-OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-
-//Value Computed by CMake
-OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
-
-//Value Computed by CMake
-OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
-
-//Arguments to supply to pkg-config
-PKG_CONFIG_ARGN:STRING=
-
-//pkg-config executable
-PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
-
-//Path to a library.
-PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
-
-//Path to a file.
-PNG_PNG_INCLUDE_DIR:PATH=/usr/include
-
-//Enable ASan on Clang and GCC
-SLIC3R_ASAN:BOOL=OFF
-
-//Build development sandboxes
-SLIC3R_BUILD_SANDBOXES:BOOL=OFF
-
-//Build unit tests
-SLIC3R_BUILD_TESTS:BOOL=OFF
-
-//Allow perfoming desktop integration during runtime
-SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
-
-//Assume OrcaSlicer is to be installed in a FHS directory structure
-SLIC3R_FHS:BOOL=OFF
-
-//GTK version to use with wxWidgets on Linux
-SLIC3R_GTK:STRING=2
-
-//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
-SLIC3R_GUI:BOOL=ON
-
-//Compile on Visual Studio in parallel
-SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
-
-//Generate PDB files on MSVC in Release mode
-SLIC3R_MSVC_PDB:BOOL=ON
-
-//Use precompiled headers
-SLIC3R_PCH:BOOL=ON
-
-//Compile XS Perl module and enable Perl unit and integration tests
-SLIC3R_PERL_XS:BOOL=OFF
-
-//Compile OrcaSlicer with an invasive Shiny profiler
-SLIC3R_PROFILE:BOOL=OFF
-
-//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
-SLIC3R_STATIC:BOOL=OFF
-
-//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
-// Linux
-SLIC3R_WX_STABLE:BOOL=OFF
-
-//The directory containing a CMake configuration file for TBB.
-TBB_DIR:PATH=/usr/lib/cmake/TBB
-
-//Path to a file.
-ZLIB_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
-
-//The directory containing a CMake configuration file for boost_atomic.
-boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
-
-//The directory containing a CMake configuration file for boost_chrono.
-boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
-
-//The directory containing a CMake configuration file for boost_date_time.
-boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
-
-//The directory containing a CMake configuration file for boost_filesystem.
-boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
-
-//The directory containing a CMake configuration file for boost_headers.
-boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
-
-//The directory containing a CMake configuration file for boost_iostreams.
-boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
-
-//The directory containing a CMake configuration file for boost_locale.
-boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
-
-//The directory containing a CMake configuration file for boost_log.
-boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
-
-//The directory containing a CMake configuration file for boost_program_options.
-boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
-
-//The directory containing a CMake configuration file for boost_regex.
-boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
-
-//The directory containing a CMake configuration file for boost_system.
-boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
-
-//The directory containing a CMake configuration file for boost_thread.
-boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
-
-//The directory containing a CMake configuration file for cereal.
-cereal_DIR:PATH=cereal_DIR-NOTFOUND
-
-//The directory containing a CMake configuration file for glfw3.
-glfw3_DIR:PATH=/usr/lib/cmake/glfw3
-
-//Path to a library.
-pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a library.
-pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
-
-
-########################
-# INTERNAL cache entries
-########################
-
-//ADVANCED property for variable: Boost_DIR
-Boost_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_ADDR2LINE
-CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_AR
-CMAKE_AR-ADVANCED:INTERNAL=1
-//This is the directory where this CMakeCache.txt was created
-CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-//Major version of cmake used to create the current loaded cache
-CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
-//Minor version of cmake used to create the current loaded cache
-CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
-//Patch version of cmake used to create the current loaded cache
-CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
-//Path to CMake executable.
-CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-//Path to cpack program executable.
-CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
-//Path to ctest program executable.
-CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
-//ADVANCED property for variable: CMAKE_CXX_COMPILER
-CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
-CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
-CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS
-CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
-CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
-CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
-CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
-CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER
-CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_AR
-CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
-CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS
-CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
-CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
-CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
-CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
-CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_DLLTOOL
-CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
-//Executable file format
-CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
-CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
-CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
-CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
-CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
-//Name of external makefile project generator.
-CMAKE_EXTRA_GENERATOR:INTERNAL=
-//Name of generator.
-CMAKE_GENERATOR:INTERNAL=Ninja
-//Generator instance identifier.
-CMAKE_GENERATOR_INSTANCE:INTERNAL=
-//Name of generator platform.
-CMAKE_GENERATOR_PLATFORM:INTERNAL=
-//Name of generator toolset.
-CMAKE_GENERATOR_TOOLSET:INTERNAL=
-//Test CMAKE_HAVE_LIBC_PTHREAD
-CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
-//Source directory with the top level CMakeLists.txt file for this
-// project
-CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
-//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
-CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
-CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
-CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
-CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
-CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
-CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
-CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
-CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
-CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
-CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
-CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
-CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
-CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
-CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
-CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
-//Install .so files without execute permission.
-CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
-//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
-CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_LINKER
-CMAKE_LINKER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
-CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
-CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
-CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_NM
-CMAKE_NM-ADVANCED:INTERNAL=1
-//number of local generators
-CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJCOPY
-CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJDUMP
-CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
-//Platform information initialized
-CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_RANLIB
-CMAKE_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_READELF
-CMAKE_READELF-ADVANCED:INTERNAL=1
-//Path to CMake installation.
-CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
-CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
-CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
-CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
-CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_RPATH
-CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
-CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
-CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
-CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STRIP
-CMAKE_STRIP-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_TAPI
-CMAKE_TAPI-ADVANCED:INTERNAL=1
-//uname command
-CMAKE_UNAME:INTERNAL=/usr/bin/uname
-//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
-CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_INCLUDE_DIR
-CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_DEBUG
-CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_RELEASE
-CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
-EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_INCLUDE_DIR
-EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
-EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
-EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Details about finding Boost
-FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
-//Details about finding CURL
-FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.0()]
-//Details about finding DBus
-FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
-//Details about finding EXPAT
-FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
-//Details about finding GLEW
-FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
-//Details about finding OpenGL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
-//Details about finding OpenSSL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
-//Details about finding PNG
-FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
-//Details about finding PkgConfig
-FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.1.1()]
-//Details about finding Threads
-FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
-//Details about finding ZLIB
-FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
-//ADVANCED property for variable: GLEW_INCLUDE_DIR
-GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
-GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
-GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
-GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
-GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Have include cereal/cereal.hpp
-HAVE_CEREAL_H:INTERNAL=
-//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
-OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
-OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
-OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
-OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
-OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_INCLUDE_DIR
-OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_egl_LIBRARY
-OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gl_LIBRARY
-OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles2_LIBRARY
-OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles3_LIBRARY
-OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glu_LIBRARY
-OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glx_LIBRARY
-OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_opengl_LIBRARY
-OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
-OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
-OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
-OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
-OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
-PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_CFLAGS_I:INTERNAL=
-PC_DBUS_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_FOUND:INTERNAL=1
-PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
-PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
-PC_DBUS_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_LIBDIR:INTERNAL=/usr/lib
-PC_DBUS_LIBRARIES:INTERNAL=dbus-1
-PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_LIBS:INTERNAL=
-PC_DBUS_LIBS_L:INTERNAL=
-PC_DBUS_LIBS_OTHER:INTERNAL=
-PC_DBUS_LIBS_PATHS:INTERNAL=
-PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
-PC_DBUS_PREFIX:INTERNAL=/usr
-PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
-PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
-PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBDIR:INTERNAL=
-PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
-PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_STATIC_LIBS:INTERNAL=
-PC_DBUS_STATIC_LIBS_L:INTERNAL=
-PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
-PC_DBUS_VERSION:INTERNAL=1.14.10
-PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
-PC_DBUS_dbus-1_LIBDIR:INTERNAL=
-PC_DBUS_dbus-1_PREFIX:INTERNAL=
-PC_DBUS_dbus-1_VERSION:INTERNAL=
-PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
-PC_EXPAT_CFLAGS_I:INTERNAL=
-PC_EXPAT_CFLAGS_OTHER:INTERNAL=
-PC_EXPAT_FOUND:INTERNAL=1
-PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
-PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
-PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
-PC_EXPAT_LIBRARIES:INTERNAL=expat
-PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_LIBS:INTERNAL=
-PC_EXPAT_LIBS_L:INTERNAL=
-PC_EXPAT_LIBS_OTHER:INTERNAL=
-PC_EXPAT_LIBS_PATHS:INTERNAL=
-PC_EXPAT_MODULE_NAME:INTERNAL=expat
-PC_EXPAT_PREFIX:INTERNAL=/usr
-PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
-PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
-PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
-PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
-PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBDIR:INTERNAL=
-PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
-PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_STATIC_LIBS:INTERNAL=
-PC_EXPAT_STATIC_LIBS_L:INTERNAL=
-PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
-PC_EXPAT_VERSION:INTERNAL=2.6.4
-PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
-PC_EXPAT_expat_LIBDIR:INTERNAL=
-PC_EXPAT_expat_PREFIX:INTERNAL=
-PC_EXPAT_expat_VERSION:INTERNAL=
-//ADVANCED property for variable: PKG_CONFIG_ARGN
-PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
-PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_DEBUG
-PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_RELEASE
-PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
-PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_INCLUDE_DIR
-ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
-ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
-ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//linker supports push/pop state
-_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
-//CMAKE_INSTALL_PREFIX during last run
-_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
-_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_CFLAGS_I:INTERNAL=
-_OPENSSL_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_FOUND:INTERNAL=1
-_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
-_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
-_OPENSSL_LDFLAGS_OTHER:INTERNAL=
-_OPENSSL_LIBDIR:INTERNAL=/usr/lib
-_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
-_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_LIBS:INTERNAL=
-_OPENSSL_LIBS_L:INTERNAL=
-_OPENSSL_LIBS_OTHER:INTERNAL=
-_OPENSSL_LIBS_PATHS:INTERNAL=
-_OPENSSL_MODULE_NAME:INTERNAL=openssl
-_OPENSSL_PREFIX:INTERNAL=/usr
-_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
-_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread;-L/usr/lib;-lcrypto;-ldl;-pthread
-_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread;-pthread
-_OPENSSL_STATIC_LIBDIR:INTERNAL=
-_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl;crypto;dl
-_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib;/usr/lib
-_OPENSSL_STATIC_LIBS:INTERNAL=
-_OPENSSL_STATIC_LIBS_L:INTERNAL=
-_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
-_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
-_OPENSSL_VERSION:INTERNAL=3.4.0
-_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
-_OPENSSL_openssl_LIBDIR:INTERNAL=
-_OPENSSL_openssl_PREFIX:INTERNAL=
-_OPENSSL_openssl_VERSION:INTERNAL=
-__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
-__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
-__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
-__pkg_config_checked_PC_DBUS:INTERNAL=1
-__pkg_config_checked_PC_EXPAT:INTERNAL=1
-__pkg_config_checked__OPENSSL:INTERNAL=1
-//ADVANCED property for variable: boost_atomic_DIR
-boost_atomic_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_chrono_DIR
-boost_chrono_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_date_time_DIR
-boost_date_time_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_filesystem_DIR
-boost_filesystem_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_headers_DIR
-boost_headers_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_iostreams_DIR
-boost_iostreams_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_locale_DIR
-boost_locale_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_log_DIR
-boost_log_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_program_options_DIR
-boost_program_options_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_regex_DIR
-boost_regex_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_system_DIR
-boost_system_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_thread_DIR
-boost_thread_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
-pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
-pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
-pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
-pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
-prefix_result:INTERNAL=/usr/lib
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
deleted file mode 100644
index d69cb8dd938..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
+++ /dev/null
@@ -1,81 +0,0 @@
-set(CMAKE_C_COMPILER "/usr/bin/cc")
-set(CMAKE_C_COMPILER_ARG1 "")
-set(CMAKE_C_COMPILER_ID "GNU")
-set(CMAKE_C_COMPILER_VERSION "14.2.1")
-set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_C_COMPILER_WRAPPER "")
-set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_C_STANDARD_LATEST "23")
-set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
-set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
-set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
-set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
-set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
-set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
-
-set(CMAKE_C_PLATFORM_ID "Linux")
-set(CMAKE_C_SIMULATE_ID "")
-set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_C_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_C_COMPILER_LINKER_ID "GNU")
-set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCC 1)
-set(CMAKE_C_COMPILER_LOADED 1)
-set(CMAKE_C_COMPILER_WORKS TRUE)
-set(CMAKE_C_ABI_COMPILED TRUE)
-
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
-
-set(CMAKE_C_COMPILER_ID_RUN 1)
-set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
-set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_C_LINKER_PREFERENCE 10)
-set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_C_SIZEOF_DATA_PTR "8")
-set(CMAKE_C_COMPILER_ABI "ELF")
-set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_C_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_C_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
-endif()
-
-if(CMAKE_C_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
-set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
deleted file mode 100644
index 7a492576727..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
+++ /dev/null
@@ -1,105 +0,0 @@
-set(CMAKE_CXX_COMPILER "/usr/bin/c++")
-set(CMAKE_CXX_COMPILER_ARG1 "")
-set(CMAKE_CXX_COMPILER_ID "GNU")
-set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
-set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_CXX_COMPILER_WRAPPER "")
-set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_CXX_STANDARD_LATEST "26")
-set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
-set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
-set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
-set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
-set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
-set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
-set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
-set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
-
-set(CMAKE_CXX_PLATFORM_ID "Linux")
-set(CMAKE_CXX_SIMULATE_ID "")
-set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_CXX_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
-set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCXX 1)
-set(CMAKE_CXX_COMPILER_LOADED 1)
-set(CMAKE_CXX_COMPILER_WORKS TRUE)
-set(CMAKE_CXX_ABI_COMPILED TRUE)
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
-
-set(CMAKE_CXX_COMPILER_ID_RUN 1)
-set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
-set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
-
-foreach (lang IN ITEMS C OBJC OBJCXX)
-  if (CMAKE_${lang}_COMPILER_ID_RUN)
-    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
-      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
-    endforeach()
-  endif()
-endforeach()
-
-set(CMAKE_CXX_LINKER_PREFERENCE 30)
-set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
-set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
-set(CMAKE_CXX_COMPILER_ABI "ELF")
-set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_CXX_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
-endif()
-
-if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
-set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
-set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
-
-set(CMAKE_CXX_COMPILER_IMPORT_STD "")
-### Imported target for C++23 standard library
-set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-### Imported target for C++26 standard library
-set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
deleted file mode 100755
index 6f4e7c0e50420bf30feec79c4ad403f23f067405..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
deleted file mode 100755
index 66c99e8612cf056b64d38a16057ec51886004a16..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
deleted file mode 100644
index b0b76c86f9e..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
+++ /dev/null
@@ -1,15 +0,0 @@
-set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_NAME "Linux")
-set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
-
-
-
-set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_NAME "Linux")
-set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_PROCESSOR "x86_64")
-
-set(CMAKE_CROSSCOMPILING "FALSE")
-
-set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
deleted file mode 100644
index 8d8bb038bb3..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
+++ /dev/null
@@ -1,904 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#if defined(__18CXX)
-# define ID_VOID_MAIN
-#endif
-#if defined(__CLASSIC_C__)
-/* cv-qualifiers did not exist in K&R C */
-# define const
-# define volatile
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_C)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_C >= 0x5100
-   /* __SUNPRO_C = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# endif
-
-#elif defined(__HP_cc)
-# define COMPILER_ID "HP"
-  /* __HP_cc = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
-
-#elif defined(__DECC)
-# define COMPILER_ID "Compaq"
-  /* __DECC_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
-
-#elif defined(__IBMC__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__TINYC__)
-# define COMPILER_ID "TinyCC"
-
-#elif defined(__BCC__)
-# define COMPILER_ID "Bruce"
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__)
-# define COMPILER_ID "GNU"
-# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
-# define COMPILER_ID "SDCC"
-# if defined(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
-#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
-# else
-  /* SDCC = VRP */
-#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
-#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
-#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define C_STD_99 199901L
-#define C_STD_11 201112L
-#define C_STD_17 201710L
-#define C_STD_23 202311L
-
-#ifdef __STDC_VERSION__
-#  define C_STD __STDC_VERSION__
-#endif
-
-#if !defined(__STDC__) && !defined(__clang__)
-# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
-#  define C_VERSION "90"
-# else
-#  define C_VERSION
-# endif
-#elif C_STD > C_STD_17
-# define C_VERSION "23"
-#elif C_STD > C_STD_11
-# define C_VERSION "17"
-#elif C_STD > C_STD_99
-# define C_VERSION "11"
-#elif C_STD >= C_STD_99
-# define C_VERSION "99"
-#else
-# define C_VERSION "90"
-#endif
-const char* info_language_standard_default =
-  "INFO" ":" "standard_default[" C_VERSION "]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef ID_VOID_MAIN
-void main() {}
-#else
-# if defined(__CLASSIC_C__)
-int main(argc, argv) int argc; char *argv[];
-# else
-int main(int argc, char* argv[])
-# endif
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
-#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
deleted file mode 100755
index 37746a787a5774e617e8abfcaacf5381d6be0900..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
deleted file mode 100644
index da6c824af3a..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
+++ /dev/null
@@ -1,919 +0,0 @@
-/* This source file must have a .cpp extension so that all C++ compilers
-   recognize the extension without flags.  Borland does not know .cxx for
-   example.  */
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_CC)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_CC >= 0x5100
-   /* __SUNPRO_CC = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# endif
-
-#elif defined(__HP_aCC)
-# define COMPILER_ID "HP"
-  /* __HP_aCC = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
-
-#elif defined(__DECCXX)
-# define COMPILER_ID "Compaq"
-  /* __DECCXX_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
-
-#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__) || defined(__GNUG__)
-# define COMPILER_ID "GNU"
-# if defined(__GNUC__)
-#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define CXX_STD_98 199711L
-#define CXX_STD_11 201103L
-#define CXX_STD_14 201402L
-#define CXX_STD_17 201703L
-#define CXX_STD_20 202002L
-#define CXX_STD_23 202302L
-
-#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > CXX_STD_17
-#    define CXX_STD _MSVC_LANG
-#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14
-#    define CXX_STD CXX_STD_17
-#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  elif defined(__INTEL_CXX11_MODE__)
-#    define CXX_STD CXX_STD_11
-#  else
-#    define CXX_STD CXX_STD_98
-#  endif
-#elif defined(_MSC_VER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > __cplusplus
-#    define CXX_STD _MSVC_LANG
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__NVCOMPILER)
-#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__INTEL_COMPILER) || defined(__PGI)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
-#    define CXX_STD CXX_STD_17
-#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
-#  define CXX_STD CXX_STD_11
-#else
-#  define CXX_STD __cplusplus
-#endif
-
-const char* info_language_standard_default = "INFO" ":" "standard_default["
-#if CXX_STD > CXX_STD_23
-  "26"
-#elif CXX_STD > CXX_STD_20
-  "23"
-#elif CXX_STD > CXX_STD_17
-  "20"
-#elif CXX_STD > CXX_STD_14
-  "17"
-#elif CXX_STD > CXX_STD_11
-  "14"
-#elif CXX_STD >= CXX_STD_11
-  "11"
-#else
-  "98"
-#endif
-"]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
deleted file mode 100755
index 78617c271080d9e2231a72abde01b7fc302df0f2..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
deleted file mode 100644
index ea990e46285..00000000000
--- a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
+++ /dev/null
@@ -1,562 +0,0 @@
-
----
-events:
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
-      Compiler: /usr/bin/cc 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
-      
-      The C compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
-      Compiler: /usr/bin/c++ 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
-      
-      The CXX compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
-      
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting C compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_C_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1
-        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s
-        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/'
-         as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.'
-        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-UosbFc']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_332c1]
-        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_332c1.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cce4ofAB.s]
-        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o /tmp/cce4ofAB.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.']
-        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -o cmTC_332c1   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_332c1' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_332c1.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/ccURuGYB.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_332c1] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o] ==> ignore
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [-lc] ==> lib [c]
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccURuGYB.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_332c1 /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_332c1.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'C': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the C compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting CXX compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: ""
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_CXX_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e
-        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s
-        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/'
-         as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.'
-        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-Ii9uQJ']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_1c87e]
-        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_1c87e.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccI2PFmy.s]
-        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o /tmp/ccI2PFmy.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.']
-        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_1c87e   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_1c87e' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_1c87e.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/cczdPYYx.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_1c87e] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
-          arg [-lstdc++] ==> lib [stdc++]
-          arg [-lm] ==> lib [m]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [-lc] ==> lib [c]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cczdPYYx.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_1c87e /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_1c87e.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'CXX': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
-      - "CMakeLists.txt:235 (find_package)"
-    checks:
-      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "CMAKE_HAVE_LIBC_PTHREAD"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_55d55
-        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_55d55.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-AqF7mh/src.c
-        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_55d55.dir/src.c.o -o cmTC_55d55   && :
-        
-      exitCode: 0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
-      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
-      - "CMakeLists.txt:544 (find_package)"
-    checks:
-      - "Looking for C++ include cereal/cereal.hpp"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "HAVE_CEREAL_H"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_d484c
-        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
-        FAILED: CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o 
-        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_d484c.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-4pbBU7/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
-            1 | #include <cereal/cereal.hpp>
-              |          ^~~~~~~~~~~~~~~~~~~
-        compilation terminated.
-        ninja: build stopped: subcommand failed.
-        
-      exitCode: 1
-...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
deleted file mode 100644
index 380b8a715f2..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
--- The C compiler identification is GNU 14.2.1
--- The CXX compiler identification is GNU 14.2.1
--- Detecting C compiler ABI info
--- Detecting C compiler ABI info - done
--- Check for working C compiler: /usr/bin/cc - skipped
--- Detecting C compile features
--- Detecting C compile features - done
--- Detecting CXX compiler ABI info
--- Detecting CXX compiler ABI info - done
--- Check for working CXX compiler: /usr/bin/c++ - skipped
--- Detecting CXX compile features
--- Detecting CXX compile features - done
--- SLIC3R_ASAN: OFF
--- SLIC3R_BUILD_SANDBOXES: OFF
--- SLIC3R_BUILD_TESTS: OFF
--- SLIC3R_DESKTOP_INTEGRATION: ON
--- SLIC3R_FHS: OFF
--- SLIC3R_GTK: 2
--- SLIC3R_GUI: ON
--- SLIC3R_MSVC_COMPILE_PARALLEL: ON
--- SLIC3R_MSVC_PDB: ON
--- SLIC3R_PCH: ON
--- SLIC3R_PERL_XS: OFF
--- SLIC3R_PROFILE: OFF
--- SLIC3R_STATIC: OFF
--- SLIC3R_WX_STABLE: OFF
--- SLIC3R_STATIC: OFF
--- CMAKE_PREFIX_PATH: (default)
--- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
--- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
--- Found PkgConfig: /usr/bin/pkg-config (found version "2.1.1")
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
--- Found Threads: TRUE
--- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
--- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
--- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
-CMake Warning (dev) at CMakeLists.txt:415 (find_package):
-  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
-  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
-  set the policy and suppress this warning.
-
-This warning is for project developers.  Use -Wno-dev to suppress it.
-
--- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
--- TBB found in /usr/lib/cmake/TBB
--- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
--- Found CURL: /usr/lib/libcurl.so (found version "8.11.0") 
--- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
--- Could NOT find Eigen3 (missing: EIGEN3_INCLUDE_DIR EIGEN3_VERSION_OK) (Required is at least version "3.3")
--- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
--- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
--- Found OpenGL: /usr/lib/libOpenGL.so
-GLEW_ROOT: 
--- Found GLEW: /usr/include (found version "2.2.0")
--- Could NOT find cereal (missing: cereal_DIR)
--- Looking for C++ include cereal/cereal.hpp
--- Looking for C++ include cereal/cereal.hpp - not found
-CMake Error at cmake/modules/Findcereal.cmake:21 (message):
-  Cereal library not found.  Please install the dependency.
-Call Stack (most recent call first):
-  CMakeLists.txt:544 (find_package)
-
-
--- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
deleted file mode 100644
index 292290e6b02..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-environment.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-Options: 
-
-Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
deleted file mode 100644
index 3dccd731726..00000000000
--- a/cmake-build-debug/CMakeFiles/cmake.check_cache
+++ /dev/null
@@ -1 +0,0 @@
-# This file is generated by cmake for dependency checking of the CMakeCache.txt file

From 95629aed6600c1a6043e5154743af060a52afd3d Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Sat, 7 Dec 2024 11:58:29 +0100
Subject: [PATCH 25/59] fix: reset to upstream

---
 .idea/.gitignore                     |  8 ++++++++
 .idea/OrcaSlicer.iml                 |  2 ++
 .idea/codeStyles/Project.xml         |  7 +++++++
 .idea/codeStyles/codeStyleConfig.xml |  5 +++++
 .idea/misc.xml                       |  4 ++++
 .idea/modules.xml                    |  8 ++++++++
 .idea/vcs.xml                        |  6 ++++++
 Dockerfile                           | 27 ++++++++++-----------------
 8 files changed, 50 insertions(+), 17 deletions(-)
 create mode 100644 .idea/.gitignore
 create mode 100644 .idea/OrcaSlicer.iml
 create mode 100644 .idea/codeStyles/Project.xml
 create mode 100644 .idea/codeStyles/codeStyleConfig.xml
 create mode 100644 .idea/misc.xml
 create mode 100644 .idea/modules.xml
 create mode 100644 .idea/vcs.xml

diff --git a/.idea/.gitignore b/.idea/.gitignore
new file mode 100644
index 00000000000..13566b81b01
--- /dev/null
+++ b/.idea/.gitignore
@@ -0,0 +1,8 @@
+# Default ignored files
+/shelf/
+/workspace.xml
+# Editor-based HTTP Client requests
+/httpRequests/
+# Datasource local storage ignored files
+/dataSources/
+/dataSources.local.xml
diff --git a/.idea/OrcaSlicer.iml b/.idea/OrcaSlicer.iml
new file mode 100644
index 00000000000..f08604bb65b
--- /dev/null
+++ b/.idea/OrcaSlicer.iml
@@ -0,0 +1,2 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<module classpath="CMake" type="CPP_MODULE" version="4" />
\ No newline at end of file
diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
new file mode 100644
index 00000000000..f60388162da
--- /dev/null
+++ b/.idea/codeStyles/Project.xml
@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>
\ No newline at end of file
diff --git a/.idea/codeStyles/codeStyleConfig.xml b/.idea/codeStyles/codeStyleConfig.xml
new file mode 100644
index 00000000000..79ee123c2b2
--- /dev/null
+++ b/.idea/codeStyles/codeStyleConfig.xml
@@ -0,0 +1,5 @@
+<component name="ProjectCodeStyleConfiguration">
+  <state>
+    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
+  </state>
+</component>
\ No newline at end of file
diff --git a/.idea/misc.xml b/.idea/misc.xml
new file mode 100644
index 00000000000..79b3c94830b
--- /dev/null
+++ b/.idea/misc.xml
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
+</project>
\ No newline at end of file
diff --git a/.idea/modules.xml b/.idea/modules.xml
new file mode 100644
index 00000000000..b80725f1d91
--- /dev/null
+++ b/.idea/modules.xml
@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="ProjectModuleManager">
+    <modules>
+      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
+    </modules>
+  </component>
+</project>
\ No newline at end of file
diff --git a/.idea/vcs.xml b/.idea/vcs.xml
new file mode 100644
index 00000000000..35eb1ddfbbc
--- /dev/null
+++ b/.idea/vcs.xml
@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project version="4">
+  <component name="VcsDirectoryMappings">
+    <mapping directory="" vcs="Git" />
+  </component>
+</project>
\ No newline at end of file
diff --git a/Dockerfile b/Dockerfile
index 5e8c8274ad8..868779b0afe 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,12 +1,6 @@
 FROM docker.io/ubuntu:22.04
 LABEL maintainer "DeftDawg <DeftDawg@gmail.com>"
 
-# Declare build arguments
-ARG USER=root
-ARG UID=0
-ARG GID=0
-ARG NCORES=1
-
 # Disable interactive package configuration
 RUN apt-get update && \
     echo 'debconf debconf/frontend select Noninteractive' | debconf-set-selections
@@ -15,8 +9,7 @@ RUN apt-get update && \
 RUN echo deb-src http://archive.ubuntu.com/ubuntu \
     $(cat /etc/*release | grep VERSION_CODENAME | cut -d= -f2) main universe>> /etc/apt/sources.list 
 
-# Install dependencies
-RUN apt-get update && apt-get install -y \
+RUN apt-get update && apt-get install  -y \
     autoconf \
     build-essential \
     cmake \
@@ -60,13 +53,12 @@ RUN apt-get update && apt-get install -y \
 # Change your locale here if you want.  See the output
 # of `locale -a` to pick the correct string formatting.
 ENV LC_ALL=en_US.utf8
-RUN locale-gen "$LC_ALL"
+RUN locale-gen $LC_ALL
 
 # Set this so that Orca Slicer doesn't complain about
 # the CA cert path on every startup
 ENV SSL_CERT_FILE=/etc/ssl/certs/ca-certificates.crt
 
-# Copy project files
 COPY ./ OrcaSlicer
 
 WORKDIR OrcaSlicer
@@ -91,12 +83,13 @@ RUN ./BuildLinux.sh -i
 # to keep permissions the same.  Just in case, defaults
 # are root.
 SHELL ["/bin/bash", "-l", "-c"]
+ARG USER=root
+ARG UID=0
+ARG GID=0
+RUN [[ "$UID" != "0" ]] \
+  && groupadd -f -g $GID $USER \
+  && useradd -u $UID -g $GID $USER
 
-# Create user if not root
-RUN if [ "$UID" != "0" ]; then \
-      groupadd -f -g "$GID" "$USER" && \
-      useradd -u "$UID" -g "$GID" "$USER"; \
-    fi
-
-# Set entrypoint
+# Using an entrypoint instead of CMD because the binary
+# accepts several command line arguments.
 ENTRYPOINT ["/OrcaSlicer/build/package/bin/orca-slicer"]

From b9159d27bde808a79868e4af03f5db106600dde0 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:50:47 +0100
Subject: [PATCH 26/59] fix: re-add generic

---
 .idea/codeStyles/Project.xml                  |   7 -
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 959 ++++++++++++++++++
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 ++
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 ++
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 0 -> 15448 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 0 -> 15464 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 +
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 0 -> 15560 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 +++++++++++++++++
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 0 -> 15576 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ++++++++++
 .../CMakeFiles/clion-Debug-log.txt            |  66 ++
 .../CMakeFiles/clion-environment.txt          |   4 +
 .../CMakeFiles/cmake.check_cache              |   1 +
 resources/profiles/BBL.json                   |  12 +
 20 files changed, 3628 insertions(+), 7 deletions(-)
 delete mode 100644 .idea/codeStyles/Project.xml
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 create mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 create mode 100644 cmake-build-debug/CMakeCache.txt
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 create mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 create mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 create mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 create mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 create mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
deleted file mode 100644
index f60388162da..00000000000
--- a/.idea/codeStyles/Project.xml
+++ /dev/null
@@ -1,7 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <clangFormatSettings>
-      <option name="ENABLED" value="true" />
-    </clangFormatSettings>
-  </code_scheme>
-</component>
\ No newline at end of file
diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
new file mode 100644
index 00000000000..e69de29bb2d
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
new file mode 100644
index 00000000000..001e9469232
--- /dev/null
+++ b/cmake-build-debug/CMakeCache.txt
@@ -0,0 +1,959 @@
+# This is the CMakeCache file.
+# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+# You can edit this file to change values found and used by cmake.
+# If you do not want to change any of the values, simply exit the editor.
+# If you do want to change a value, simply edit, save, and exit the editor.
+# The syntax for the file is as follows:
+# KEY:TYPE=VALUE
+# KEY is the name of a variable in the cache.
+# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
+# VALUE is the current value for the KEY.
+
+########################
+# EXTERNAL cache entries
+########################
+
+Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
+
+Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
+
+Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
+
+//The directory containing a CMake configuration file for Boost.
+Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
+
+Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
+
+//Path to a file.
+Boost_INCLUDE_DIR:PATH=/usr/include
+
+Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
+
+Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
+
+Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
+
+Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
+
+Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
+
+Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
+
+Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
+
+//Path to a program.
+CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
+
+//Path to a program.
+CMAKE_AR:FILEPATH=/usr/bin/ar
+
+//Choose the type of build, options are: None Debug Release RelWithDebInfo
+// MinSizeRel ...
+CMAKE_BUILD_TYPE:STRING=Debug
+
+//Enable colored diagnostics throughout.
+CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
+
+//CXX compiler
+CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the CXX compiler during all build types.
+CMAKE_CXX_FLAGS:STRING=
+
+//Flags used by the CXX compiler during DEBUG builds.
+CMAKE_CXX_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the CXX compiler during MINSIZEREL builds.
+CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the CXX compiler during RELEASE builds.
+CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the CXX compiler during RELWITHDEBINFO builds.
+CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//C compiler
+CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
+
+//A wrapper around 'ar' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
+
+//A wrapper around 'ranlib' adding the appropriate '--plugin' option
+// for the GCC compiler
+CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
+
+//Flags used by the C compiler during all build types.
+CMAKE_C_FLAGS:STRING=
+
+//Flags used by the C compiler during DEBUG builds.
+CMAKE_C_FLAGS_DEBUG:STRING=-g
+
+//Flags used by the C compiler during MINSIZEREL builds.
+CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
+
+//Flags used by the C compiler during RELEASE builds.
+CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
+
+//Flags used by the C compiler during RELWITHDEBINFO builds.
+CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
+
+//Path to a program.
+CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
+
+//Flags used by the linker during all build types.
+CMAKE_EXE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during DEBUG builds.
+CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during MINSIZEREL builds.
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during RELEASE builds.
+CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during RELWITHDEBINFO builds.
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Enable/Disable output of compile commands during generation.
+CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
+
+//Value Computed by CMake.
+CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
+
+//User executables (bin)
+CMAKE_INSTALL_BINDIR:PATH=bin
+
+//Read-only architecture-independent data (DATAROOTDIR)
+CMAKE_INSTALL_DATADIR:PATH=
+
+//Read-only architecture-independent data root (share)
+CMAKE_INSTALL_DATAROOTDIR:PATH=share
+
+//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
+CMAKE_INSTALL_DOCDIR:PATH=
+
+//C header files (include)
+CMAKE_INSTALL_INCLUDEDIR:PATH=include
+
+//Info documentation (DATAROOTDIR/info)
+CMAKE_INSTALL_INFODIR:PATH=
+
+//Object code libraries (lib)
+CMAKE_INSTALL_LIBDIR:PATH=lib
+
+//Program executables (libexec)
+CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
+
+//Locale-dependent data (DATAROOTDIR/locale)
+CMAKE_INSTALL_LOCALEDIR:PATH=
+
+//Modifiable single-machine data (var)
+CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
+
+//Man documentation (DATAROOTDIR/man)
+CMAKE_INSTALL_MANDIR:PATH=
+
+//C header files for non-gcc (/usr/include)
+CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
+
+//Install path prefix, prepended onto install directories.
+CMAKE_INSTALL_PREFIX:PATH=/usr/local
+
+//Run-time variable data (LOCALSTATEDIR/run)
+CMAKE_INSTALL_RUNSTATEDIR:PATH=
+
+//System admin executables (sbin)
+CMAKE_INSTALL_SBINDIR:PATH=sbin
+
+//Modifiable architecture-independent data (com)
+CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
+
+//Read-only single-machine data (etc)
+CMAKE_INSTALL_SYSCONFDIR:PATH=etc
+
+//Path to a program.
+CMAKE_LINKER:FILEPATH=/usr/bin/ld
+
+//No help, variable specified on the command line.
+CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+
+//Flags used by the linker during the creation of modules during
+// all build types.
+CMAKE_MODULE_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of modules during
+// DEBUG builds.
+CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of modules during
+// MINSIZEREL builds.
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELEASE builds.
+CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of modules during
+// RELWITHDEBINFO builds.
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_NM:FILEPATH=/usr/bin/nm
+
+//Path to a program.
+CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
+
+//Path to a program.
+CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
+
+//Value Computed by CMake
+CMAKE_PROJECT_DESCRIPTION:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
+
+//Value Computed by CMake
+CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
+
+//Path to a program.
+CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
+
+//Path to a program.
+CMAKE_READELF:FILEPATH=/usr/bin/readelf
+
+//Flags used by the linker during the creation of shared libraries
+// during all build types.
+CMAKE_SHARED_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during DEBUG builds.
+CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during MINSIZEREL builds.
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELEASE builds.
+CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of shared libraries
+// during RELWITHDEBINFO builds.
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//If set, runtime paths are not added when installing shared libraries,
+// but are added when building.
+CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
+
+//If set, runtime paths are not added when using shared libraries.
+CMAKE_SKIP_RPATH:BOOL=NO
+
+//Flags used by the linker during the creation of static libraries
+// during all build types.
+CMAKE_STATIC_LINKER_FLAGS:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during DEBUG builds.
+CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during MINSIZEREL builds.
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELEASE builds.
+CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
+
+//Flags used by the linker during the creation of static libraries
+// during RELWITHDEBINFO builds.
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
+
+//Path to a program.
+CMAKE_STRIP:FILEPATH=/usr/bin/strip
+
+//Path to a program.
+CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
+
+//If this value is on, makefiles will be generated without the
+// .SILENT directive, and all commands will be echoed to the console
+// during the make.  This is useful for debugging only. With Visual
+// Studio IDE projects all commands are done without /nologo.
+CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
+
+//Path to a file.
+CURL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
+
+//Path to a file.
+DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
+
+//Path to a file.
+DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
+
+//Path to a library.
+DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a file.
+EIGEN3_INCLUDE_DIR:PATH=/usr/include/eigen3
+
+//Path to a file.
+EXPAT_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a file.
+GLEW_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
+
+//Path to a file.
+OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a file.
+OPENGL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
+
+//Path to a library.
+OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
+
+//Path to a library.
+OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
+
+//Path to a library.
+OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
+
+//Path to a library.
+OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
+
+//Path to a library.
+OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
+
+//Path to a file.
+OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
+
+//Path to a library.
+OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a file.
+OPENSSL_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
+
+//Path to OpenVDB installation's find modules.
+OPENVDB_FIND_MODULE_PATH:PATH=
+
+//Build Orca tools
+ORCA_TOOLS:BOOL=OFF
+
+//Value Computed by CMake
+OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+
+//Value Computed by CMake
+OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
+
+//Value Computed by CMake
+OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
+
+//Arguments to supply to pkg-config
+PKG_CONFIG_ARGN:STRING=
+
+//pkg-config executable
+PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
+
+//Path to a library.
+PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
+
+//Path to a file.
+PNG_PNG_INCLUDE_DIR:PATH=/usr/include
+
+//Enable ASan on Clang and GCC
+SLIC3R_ASAN:BOOL=OFF
+
+//Build development sandboxes
+SLIC3R_BUILD_SANDBOXES:BOOL=OFF
+
+//Build unit tests
+SLIC3R_BUILD_TESTS:BOOL=OFF
+
+//Allow perfoming desktop integration during runtime
+SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
+
+//Assume OrcaSlicer is to be installed in a FHS directory structure
+SLIC3R_FHS:BOOL=OFF
+
+//GTK version to use with wxWidgets on Linux
+SLIC3R_GTK:STRING=2
+
+//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
+SLIC3R_GUI:BOOL=ON
+
+//Compile on Visual Studio in parallel
+SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
+
+//Generate PDB files on MSVC in Release mode
+SLIC3R_MSVC_PDB:BOOL=ON
+
+//Use precompiled headers
+SLIC3R_PCH:BOOL=ON
+
+//Compile XS Perl module and enable Perl unit and integration tests
+SLIC3R_PERL_XS:BOOL=OFF
+
+//Compile OrcaSlicer with an invasive Shiny profiler
+SLIC3R_PROFILE:BOOL=OFF
+
+//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
+SLIC3R_STATIC:BOOL=OFF
+
+//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
+// Linux
+SLIC3R_WX_STABLE:BOOL=OFF
+
+//The directory containing a CMake configuration file for TBB.
+TBB_DIR:PATH=/usr/lib/cmake/TBB
+
+//Path to a file.
+ZLIB_INCLUDE_DIR:PATH=/usr/include
+
+//Path to a library.
+ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
+
+//Path to a library.
+ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
+
+//The directory containing a CMake configuration file for boost_atomic.
+boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
+
+//The directory containing a CMake configuration file for boost_chrono.
+boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
+
+//The directory containing a CMake configuration file for boost_date_time.
+boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
+
+//The directory containing a CMake configuration file for boost_filesystem.
+boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
+
+//The directory containing a CMake configuration file for boost_headers.
+boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
+
+//The directory containing a CMake configuration file for boost_iostreams.
+boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
+
+//The directory containing a CMake configuration file for boost_locale.
+boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
+
+//The directory containing a CMake configuration file for boost_log.
+boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
+
+//The directory containing a CMake configuration file for boost_program_options.
+boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
+
+//The directory containing a CMake configuration file for boost_regex.
+boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
+
+//The directory containing a CMake configuration file for boost_system.
+boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
+
+//The directory containing a CMake configuration file for boost_thread.
+boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
+
+//The directory containing a CMake configuration file for cereal.
+cereal_DIR:PATH=cereal_DIR-NOTFOUND
+
+//The directory containing a CMake configuration file for glfw3.
+glfw3_DIR:PATH=/usr/lib/cmake/glfw3
+
+//Path to a library.
+pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
+
+//Path to a library.
+pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
+
+//Path to a library.
+pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
+
+
+########################
+# INTERNAL cache entries
+########################
+
+//ADVANCED property for variable: Boost_DIR
+Boost_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_ADDR2LINE
+CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_AR
+CMAKE_AR-ADVANCED:INTERNAL=1
+//This is the directory where this CMakeCache.txt was created
+CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
+//Major version of cmake used to create the current loaded cache
+CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
+//Minor version of cmake used to create the current loaded cache
+CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
+//Patch version of cmake used to create the current loaded cache
+CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
+//Path to CMake executable.
+CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
+//Path to cpack program executable.
+CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
+//Path to ctest program executable.
+CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
+//ADVANCED property for variable: CMAKE_CXX_COMPILER
+CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
+CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
+CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS
+CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
+CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
+CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
+CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
+CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER
+CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_AR
+CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
+CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS
+CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
+CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
+CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
+CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
+CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_DLLTOOL
+CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
+//Executable file format
+CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
+CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
+CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
+CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
+CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
+CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
+//Name of external makefile project generator.
+CMAKE_EXTRA_GENERATOR:INTERNAL=
+//Name of generator.
+CMAKE_GENERATOR:INTERNAL=Ninja
+//Generator instance identifier.
+CMAKE_GENERATOR_INSTANCE:INTERNAL=
+//Name of generator platform.
+CMAKE_GENERATOR_PLATFORM:INTERNAL=
+//Name of generator toolset.
+CMAKE_GENERATOR_TOOLSET:INTERNAL=
+//Test CMAKE_HAVE_LIBC_PTHREAD
+CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
+//Source directory with the top level CMakeLists.txt file for this
+// project
+CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
+//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
+CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
+CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
+CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
+CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
+CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
+CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
+CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
+CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
+CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
+CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
+CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
+CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
+CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
+CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
+CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
+//Install .so files without execute permission.
+CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
+//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
+CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_LINKER
+CMAKE_LINKER-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
+CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
+CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
+CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
+CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_NM
+CMAKE_NM-ADVANCED:INTERNAL=1
+//number of local generators
+CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJCOPY
+CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_OBJDUMP
+CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
+//Platform information initialized
+CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_RANLIB
+CMAKE_RANLIB-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_READELF
+CMAKE_READELF-ADVANCED:INTERNAL=1
+//Path to CMake installation.
+CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
+CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
+CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
+CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
+CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
+CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_SKIP_RPATH
+CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
+CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
+CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
+CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
+CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
+CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_STRIP
+CMAKE_STRIP-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CMAKE_TAPI
+CMAKE_TAPI-ADVANCED:INTERNAL=1
+//uname command
+CMAKE_UNAME:INTERNAL=/usr/bin/uname
+//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
+CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_INCLUDE_DIR
+CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_DEBUG
+CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: CURL_LIBRARY_RELEASE
+CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
+EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_INCLUDE_DIR
+EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
+EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
+EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Details about finding Boost
+FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
+//Details about finding CURL
+FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.1()]
+//Details about finding DBus
+FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
+//Details about finding EXPAT
+FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
+//Details about finding Eigen3
+FIND_PACKAGE_MESSAGE_DETAILS_Eigen3:INTERNAL=[/usr/include/eigen3][TRUE][v(3.3)]
+//Details about finding GLEW
+FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
+//Details about finding OpenGL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
+//Details about finding OpenSSL
+FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
+//Details about finding PNG
+FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
+//Details about finding PkgConfig
+FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.3.0()]
+//Details about finding Threads
+FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
+//Details about finding ZLIB
+FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
+//ADVANCED property for variable: GLEW_INCLUDE_DIR
+GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
+GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
+GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
+GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
+GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//Have include cereal/cereal.hpp
+HAVE_CEREAL_H:INTERNAL=
+//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
+OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
+OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
+OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
+OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
+OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_INCLUDE_DIR
+OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_egl_LIBRARY
+OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gl_LIBRARY
+OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles2_LIBRARY
+OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_gles3_LIBRARY
+OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glu_LIBRARY
+OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_glx_LIBRARY
+OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_opengl_LIBRARY
+OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
+OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
+OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
+OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
+OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
+PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_CFLAGS_I:INTERNAL=
+PC_DBUS_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_FOUND:INTERNAL=1
+PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
+PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
+PC_DBUS_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_LIBDIR:INTERNAL=/usr/lib
+PC_DBUS_LIBRARIES:INTERNAL=dbus-1
+PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_LIBS:INTERNAL=
+PC_DBUS_LIBS_L:INTERNAL=
+PC_DBUS_LIBS_OTHER:INTERNAL=
+PC_DBUS_LIBS_PATHS:INTERNAL=
+PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
+PC_DBUS_PREFIX:INTERNAL=/usr
+PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
+PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
+PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBDIR:INTERNAL=
+PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
+PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_DBUS_STATIC_LIBS:INTERNAL=
+PC_DBUS_STATIC_LIBS_L:INTERNAL=
+PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
+PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
+PC_DBUS_VERSION:INTERNAL=1.14.10
+PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
+PC_DBUS_dbus-1_LIBDIR:INTERNAL=
+PC_DBUS_dbus-1_PREFIX:INTERNAL=
+PC_DBUS_dbus-1_VERSION:INTERNAL=
+PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
+PC_EXPAT_CFLAGS_I:INTERNAL=
+PC_EXPAT_CFLAGS_OTHER:INTERNAL=
+PC_EXPAT_FOUND:INTERNAL=1
+PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
+PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
+PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
+PC_EXPAT_LIBRARIES:INTERNAL=expat
+PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_LIBS:INTERNAL=
+PC_EXPAT_LIBS_L:INTERNAL=
+PC_EXPAT_LIBS_OTHER:INTERNAL=
+PC_EXPAT_LIBS_PATHS:INTERNAL=
+PC_EXPAT_MODULE_NAME:INTERNAL=expat
+PC_EXPAT_PREFIX:INTERNAL=/usr
+PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
+PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
+PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
+PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
+PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBDIR:INTERNAL=
+PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
+PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+PC_EXPAT_STATIC_LIBS:INTERNAL=
+PC_EXPAT_STATIC_LIBS_L:INTERNAL=
+PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
+PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
+PC_EXPAT_VERSION:INTERNAL=2.6.4
+PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
+PC_EXPAT_expat_LIBDIR:INTERNAL=
+PC_EXPAT_expat_PREFIX:INTERNAL=
+PC_EXPAT_expat_VERSION:INTERNAL=
+//ADVANCED property for variable: PKG_CONFIG_ARGN
+PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
+PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_DEBUG
+PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_LIBRARY_RELEASE
+PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
+PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_INCLUDE_DIR
+ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
+ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
+ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
+//linker supports push/pop state
+_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
+//CMAKE_INSTALL_PREFIX during last run
+_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
+_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_CFLAGS_I:INTERNAL=
+_OPENSSL_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_FOUND:INTERNAL=1
+_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
+_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
+_OPENSSL_LDFLAGS_OTHER:INTERNAL=
+_OPENSSL_LIBDIR:INTERNAL=/usr/lib
+_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
+_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_LIBS:INTERNAL=
+_OPENSSL_LIBS_L:INTERNAL=
+_OPENSSL_LIBS_OTHER:INTERNAL=
+_OPENSSL_LIBS_PATHS:INTERNAL=
+_OPENSSL_MODULE_NAME:INTERNAL=openssl
+_OPENSSL_PREFIX:INTERNAL=/usr
+_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
+_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
+_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
+_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
+_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread
+_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread
+_OPENSSL_STATIC_LIBDIR:INTERNAL=
+_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl
+_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
+_OPENSSL_STATIC_LIBS:INTERNAL=
+_OPENSSL_STATIC_LIBS_L:INTERNAL=
+_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
+_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
+_OPENSSL_VERSION:INTERNAL=3.4.0
+_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
+_OPENSSL_openssl_LIBDIR:INTERNAL=
+_OPENSSL_openssl_PREFIX:INTERNAL=
+_OPENSSL_openssl_VERSION:INTERNAL=
+__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
+__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
+__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
+__pkg_config_checked_PC_DBUS:INTERNAL=1
+__pkg_config_checked_PC_EXPAT:INTERNAL=1
+__pkg_config_checked__OPENSSL:INTERNAL=1
+//ADVANCED property for variable: boost_atomic_DIR
+boost_atomic_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_chrono_DIR
+boost_chrono_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_date_time_DIR
+boost_date_time_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_filesystem_DIR
+boost_filesystem_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_headers_DIR
+boost_headers_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_iostreams_DIR
+boost_iostreams_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_locale_DIR
+boost_locale_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_log_DIR
+boost_log_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_program_options_DIR
+boost_program_options_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_regex_DIR
+boost_regex_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_system_DIR
+boost_system_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: boost_thread_DIR
+boost_thread_DIR-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
+pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
+pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
+pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
+//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
+pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
+prefix_result:INTERNAL=/usr/lib
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
new file mode 100644
index 00000000000..d69cb8dd938
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
@@ -0,0 +1,81 @@
+set(CMAKE_C_COMPILER "/usr/bin/cc")
+set(CMAKE_C_COMPILER_ARG1 "")
+set(CMAKE_C_COMPILER_ID "GNU")
+set(CMAKE_C_COMPILER_VERSION "14.2.1")
+set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_C_COMPILER_WRAPPER "")
+set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_C_STANDARD_LATEST "23")
+set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
+set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
+set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
+set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
+set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
+set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
+
+set(CMAKE_C_PLATFORM_ID "Linux")
+set(CMAKE_C_SIMULATE_ID "")
+set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_C_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_C_COMPILER_LINKER_ID "GNU")
+set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCC 1)
+set(CMAKE_C_COMPILER_LOADED 1)
+set(CMAKE_C_COMPILER_WORKS TRUE)
+set(CMAKE_C_ABI_COMPILED TRUE)
+
+set(CMAKE_C_COMPILER_ENV_VAR "CC")
+
+set(CMAKE_C_COMPILER_ID_RUN 1)
+set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
+set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
+set(CMAKE_C_LINKER_PREFERENCE 10)
+set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_C_SIZEOF_DATA_PTR "8")
+set(CMAKE_C_COMPILER_ABI "ELF")
+set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_C_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_C_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_C_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
+endif()
+
+if(CMAKE_C_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
+set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
new file mode 100644
index 00000000000..7a492576727
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
@@ -0,0 +1,105 @@
+set(CMAKE_CXX_COMPILER "/usr/bin/c++")
+set(CMAKE_CXX_COMPILER_ARG1 "")
+set(CMAKE_CXX_COMPILER_ID "GNU")
+set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
+set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
+set(CMAKE_CXX_COMPILER_WRAPPER "")
+set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
+set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
+set(CMAKE_CXX_STANDARD_LATEST "26")
+set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
+set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
+set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
+set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
+set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
+set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
+set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
+set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
+
+set(CMAKE_CXX_PLATFORM_ID "Linux")
+set(CMAKE_CXX_SIMULATE_ID "")
+set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
+set(CMAKE_CXX_SIMULATE_VERSION "")
+
+
+
+
+set(CMAKE_AR "/usr/bin/ar")
+set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
+set(CMAKE_RANLIB "/usr/bin/ranlib")
+set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
+set(CMAKE_LINKER "/usr/bin/ld")
+set(CMAKE_LINKER_LINK "")
+set(CMAKE_LINKER_LLD "")
+set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
+set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
+set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
+set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
+set(CMAKE_MT "")
+set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
+set(CMAKE_COMPILER_IS_GNUCXX 1)
+set(CMAKE_CXX_COMPILER_LOADED 1)
+set(CMAKE_CXX_COMPILER_WORKS TRUE)
+set(CMAKE_CXX_ABI_COMPILED TRUE)
+
+set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
+
+set(CMAKE_CXX_COMPILER_ID_RUN 1)
+set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
+set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
+
+foreach (lang IN ITEMS C OBJC OBJCXX)
+  if (CMAKE_${lang}_COMPILER_ID_RUN)
+    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
+      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
+    endforeach()
+  endif()
+endforeach()
+
+set(CMAKE_CXX_LINKER_PREFERENCE 30)
+set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
+set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
+
+# Save compiler ABI information.
+set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
+set(CMAKE_CXX_COMPILER_ABI "ELF")
+set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
+set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
+
+if(CMAKE_CXX_SIZEOF_DATA_PTR)
+  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
+endif()
+
+if(CMAKE_CXX_COMPILER_ABI)
+  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
+endif()
+
+if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
+  set(CMAKE_LIBRARY_ARCHITECTURE "")
+endif()
+
+set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
+if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
+  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
+endif()
+
+
+
+
+
+set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
+set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
+set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
+set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
+set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
+
+set(CMAKE_CXX_COMPILER_IMPORT_STD "")
+### Imported target for C++23 standard library
+set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+### Imported target for C++26 standard library
+set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
+
+
+
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
new file mode 100755
index 0000000000000000000000000000000000000000..6f4e7c0e50420bf30feec79c4ad403f23f067405
GIT binary patch
literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
new file mode 100755
index 0000000000000000000000000000000000000000..66c99e8612cf056b64d38a16057ec51886004a16
GIT binary patch
literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
new file mode 100644
index 00000000000..b0b76c86f9e
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
@@ -0,0 +1,15 @@
+set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_NAME "Linux")
+set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
+
+
+
+set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_NAME "Linux")
+set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
+set(CMAKE_SYSTEM_PROCESSOR "x86_64")
+
+set(CMAKE_CROSSCOMPILING "FALSE")
+
+set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
new file mode 100644
index 00000000000..8d8bb038bb3
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
@@ -0,0 +1,904 @@
+#ifdef __cplusplus
+# error "A C++ compiler has been selected for C."
+#endif
+
+#if defined(__18CXX)
+# define ID_VOID_MAIN
+#endif
+#if defined(__CLASSIC_C__)
+/* cv-qualifiers did not exist in K&R C */
+# define const
+# define volatile
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_C)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_C >= 0x5100
+   /* __SUNPRO_C = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
+# endif
+
+#elif defined(__HP_cc)
+# define COMPILER_ID "HP"
+  /* __HP_cc = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
+
+#elif defined(__DECC)
+# define COMPILER_ID "Compaq"
+  /* __DECC_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
+
+#elif defined(__IBMC__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMC__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__TINYC__)
+# define COMPILER_ID "TinyCC"
+
+#elif defined(__BCC__)
+# define COMPILER_ID "Bruce"
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__)
+# define COMPILER_ID "GNU"
+# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
+# define COMPILER_ID "SDCC"
+# if defined(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
+#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
+#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
+# else
+  /* SDCC = VRP */
+#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
+#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
+#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define C_STD_99 199901L
+#define C_STD_11 201112L
+#define C_STD_17 201710L
+#define C_STD_23 202311L
+
+#ifdef __STDC_VERSION__
+#  define C_STD __STDC_VERSION__
+#endif
+
+#if !defined(__STDC__) && !defined(__clang__)
+# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
+#  define C_VERSION "90"
+# else
+#  define C_VERSION
+# endif
+#elif C_STD > C_STD_17
+# define C_VERSION "23"
+#elif C_STD > C_STD_11
+# define C_VERSION "17"
+#elif C_STD > C_STD_99
+# define C_VERSION "11"
+#elif C_STD >= C_STD_99
+# define C_VERSION "99"
+#else
+# define C_VERSION "90"
+#endif
+const char* info_language_standard_default =
+  "INFO" ":" "standard_default[" C_VERSION "]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+#ifdef ID_VOID_MAIN
+void main() {}
+#else
+# if defined(__CLASSIC_C__)
+int main(argc, argv) int argc; char *argv[];
+# else
+int main(int argc, char* argv[])
+# endif
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
+#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..37746a787a5774e617e8abfcaacf5381d6be0900
GIT binary patch
literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
new file mode 100644
index 00000000000..da6c824af3a
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
@@ -0,0 +1,919 @@
+/* This source file must have a .cpp extension so that all C++ compilers
+   recognize the extension without flags.  Borland does not know .cxx for
+   example.  */
+#ifndef __cplusplus
+# error "A C compiler has been selected for C++."
+#endif
+
+#if !defined(__has_include)
+/* If the compiler does not have __has_include, pretend the answer is
+   always no.  */
+#  define __has_include(x) 0
+#endif
+
+
+/* Version number components: V=Version, R=Revision, P=Patch
+   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
+
+#if defined(__INTEL_COMPILER) || defined(__ICC)
+# define COMPILER_ID "Intel"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_ID "GNU"
+# endif
+  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
+     except that a few beta releases use the old format with V=2021.  */
+# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
+#  if defined(__INTEL_COMPILER_UPDATE)
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
+#  else
+#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
+#  endif
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
+#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
+   /* The third version component from --version is an update index,
+      but no macro is provided for it.  */
+#  define COMPILER_VERSION_PATCH DEC(0)
+# endif
+# if defined(__INTEL_COMPILER_BUILD_DATE)
+   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
+#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
+# endif
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# if defined(__GNUC__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+# elif defined(__GNUG__)
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
+# define COMPILER_ID "IntelLLVM"
+#if defined(_MSC_VER)
+# define SIMULATE_ID "MSVC"
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_ID "GNU"
+#endif
+/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
+ * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
+ * VVVV is no smaller than the current year when a version is released.
+ */
+#if __INTEL_LLVM_COMPILER < 1000000L
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
+#else
+# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
+# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
+#endif
+#if defined(_MSC_VER)
+  /* _MSC_VER = VVRR */
+# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+#endif
+#if defined(__GNUC__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#elif defined(__GNUG__)
+# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
+#endif
+#if defined(__GNUC_MINOR__)
+# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#endif
+#if defined(__GNUC_PATCHLEVEL__)
+# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#endif
+
+#elif defined(__PATHCC__)
+# define COMPILER_ID "PathScale"
+# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
+# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
+# if defined(__PATHCC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
+# endif
+
+#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
+# define COMPILER_ID "Embarcadero"
+# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
+# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
+# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
+
+#elif defined(__BORLANDC__)
+# define COMPILER_ID "Borland"
+  /* __BORLANDC__ = 0xVRR */
+# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
+# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
+
+#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
+# define COMPILER_ID "Watcom"
+   /* __WATCOMC__ = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__WATCOMC__)
+# define COMPILER_ID "OpenWatcom"
+   /* __WATCOMC__ = VVRP + 1100 */
+# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
+# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
+# if (__WATCOMC__ % 10) > 0
+#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
+# endif
+
+#elif defined(__SUNPRO_CC)
+# define COMPILER_ID "SunPro"
+# if __SUNPRO_CC >= 0x5100
+   /* __SUNPRO_CC = 0xVRRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# else
+   /* __SUNPRO_CC = 0xVRP */
+#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
+#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
+#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
+# endif
+
+#elif defined(__HP_aCC)
+# define COMPILER_ID "HP"
+  /* __HP_aCC = VVRRPP */
+# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
+# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
+# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
+
+#elif defined(__DECCXX)
+# define COMPILER_ID "Compaq"
+  /* __DECCXX_VER = VVRRTPPPP */
+# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
+# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
+# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
+
+#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
+# define COMPILER_ID "zOS"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__open_xl__) && defined(__clang__)
+# define COMPILER_ID "IBMClang"
+# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
+# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
+# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
+
+
+#elif defined(__ibmxl__) && defined(__clang__)
+# define COMPILER_ID "XLClang"
+# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
+# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
+# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
+# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
+
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
+# define COMPILER_ID "XL"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
+# define COMPILER_ID "VisualAge"
+  /* __IBMCPP__ = VRP */
+# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
+# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
+
+#elif defined(__NVCOMPILER)
+# define COMPILER_ID "NVHPC"
+# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
+# if defined(__NVCOMPILER_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
+# endif
+
+#elif defined(__PGI)
+# define COMPILER_ID "PGI"
+# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
+# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
+# if defined(__PGIC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
+# endif
+
+#elif defined(__clang__) && defined(__cray__)
+# define COMPILER_ID "CrayClang"
+# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
+# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
+# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(_CRAYC)
+# define COMPILER_ID "Cray"
+# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
+# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
+
+#elif defined(__TI_COMPILER_VERSION__)
+# define COMPILER_ID "TI"
+  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
+# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
+# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
+# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
+
+#elif defined(__CLANG_FUJITSU)
+# define COMPILER_ID "FujitsuClang"
+# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# define COMPILER_VERSION_INTERNAL_STR __clang_version__
+
+
+#elif defined(__FUJITSU)
+# define COMPILER_ID "Fujitsu"
+# if defined(__FCC_version__)
+#   define COMPILER_VERSION __FCC_version__
+# elif defined(__FCC_major__)
+#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
+#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
+#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
+# endif
+# if defined(__fcc_version)
+#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
+# elif defined(__FCC_VERSION)
+#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
+# endif
+
+
+#elif defined(__ghs__)
+# define COMPILER_ID "GHS"
+/* __GHS_VERSION_NUMBER = VVVVRP */
+# ifdef __GHS_VERSION_NUMBER
+# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
+# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
+# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
+# endif
+
+#elif defined(__TASKING__)
+# define COMPILER_ID "Tasking"
+  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
+  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
+
+#elif defined(__ORANGEC__)
+# define COMPILER_ID "OrangeC"
+# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
+# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
+# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
+
+#elif defined(__SCO_VERSION__)
+# define COMPILER_ID "SCO"
+
+#elif defined(__ARMCC_VERSION) && !defined(__clang__)
+# define COMPILER_ID "ARMCC"
+#if __ARMCC_VERSION >= 1000000
+  /* __ARMCC_VERSION = VRRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
+#else
+  /* __ARMCC_VERSION = VRPPPP */
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
+#endif
+
+
+#elif defined(__clang__) && defined(__apple_build_version__)
+# define COMPILER_ID "AppleClang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
+
+#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
+# define COMPILER_ID "ARMClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
+  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
+  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
+# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
+
+#elif defined(__clang__) && defined(__ti__)
+# define COMPILER_ID "TIClang"
+  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
+  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
+  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
+# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
+
+#elif defined(__clang__)
+# define COMPILER_ID "Clang"
+# if defined(_MSC_VER)
+#  define SIMULATE_ID "MSVC"
+# endif
+# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
+# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
+# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
+# if defined(_MSC_VER)
+   /* _MSC_VER = VVRR */
+#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
+#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
+# endif
+
+#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
+# define COMPILER_ID "LCC"
+# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
+# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
+# if defined(__LCC_MINOR__)
+#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
+# endif
+# if defined(__GNUC__) && defined(__GNUC_MINOR__)
+#  define SIMULATE_ID "GNU"
+#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
+#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
+#  if defined(__GNUC_PATCHLEVEL__)
+#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+#  endif
+# endif
+
+#elif defined(__GNUC__) || defined(__GNUG__)
+# define COMPILER_ID "GNU"
+# if defined(__GNUC__)
+#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
+# else
+#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
+# endif
+# if defined(__GNUC_MINOR__)
+#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
+# endif
+# if defined(__GNUC_PATCHLEVEL__)
+#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
+# endif
+
+#elif defined(_MSC_VER)
+# define COMPILER_ID "MSVC"
+  /* _MSC_VER = VVRR */
+# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
+# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
+# if defined(_MSC_FULL_VER)
+#  if _MSC_VER >= 1400
+    /* _MSC_FULL_VER = VVRRPPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
+#  else
+    /* _MSC_FULL_VER = VVRRPPPP */
+#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
+#  endif
+# endif
+# if defined(_MSC_BUILD)
+#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
+# endif
+
+#elif defined(_ADI_COMPILER)
+# define COMPILER_ID "ADSP"
+#if defined(__VERSIONNUM__)
+  /* __VERSIONNUM__ = 0xVVRRPPTT */
+#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
+#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
+#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
+#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
+#endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# define COMPILER_ID "IAR"
+# if defined(__VER__) && defined(__ICCARM__)
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
+#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
+#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
+#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
+#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
+#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
+#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
+# endif
+
+
+/* These compilers are either not known or too old to define an
+  identification macro.  Try to identify the platform and guess that
+  it is the native compiler.  */
+#elif defined(__hpux) || defined(__hpua)
+# define COMPILER_ID "HP"
+
+#else /* unknown compiler */
+# define COMPILER_ID ""
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
+#ifdef SIMULATE_ID
+char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
+#endif
+
+#ifdef __QNXNTO__
+char const* qnxnto = "INFO" ":" "qnxnto[]";
+#endif
+
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
+#endif
+
+#define STRINGIFY_HELPER(X) #X
+#define STRINGIFY(X) STRINGIFY_HELPER(X)
+
+/* Identify known platforms by name.  */
+#if defined(__linux) || defined(__linux__) || defined(linux)
+# define PLATFORM_ID "Linux"
+
+#elif defined(__MSYS__)
+# define PLATFORM_ID "MSYS"
+
+#elif defined(__CYGWIN__)
+# define PLATFORM_ID "Cygwin"
+
+#elif defined(__MINGW32__)
+# define PLATFORM_ID "MinGW"
+
+#elif defined(__APPLE__)
+# define PLATFORM_ID "Darwin"
+
+#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
+# define PLATFORM_ID "Windows"
+
+#elif defined(__FreeBSD__) || defined(__FreeBSD)
+# define PLATFORM_ID "FreeBSD"
+
+#elif defined(__NetBSD__) || defined(__NetBSD)
+# define PLATFORM_ID "NetBSD"
+
+#elif defined(__OpenBSD__) || defined(__OPENBSD)
+# define PLATFORM_ID "OpenBSD"
+
+#elif defined(__sun) || defined(sun)
+# define PLATFORM_ID "SunOS"
+
+#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
+# define PLATFORM_ID "AIX"
+
+#elif defined(__hpux) || defined(__hpux__)
+# define PLATFORM_ID "HP-UX"
+
+#elif defined(__HAIKU__)
+# define PLATFORM_ID "Haiku"
+
+#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
+# define PLATFORM_ID "BeOS"
+
+#elif defined(__QNX__) || defined(__QNXNTO__)
+# define PLATFORM_ID "QNX"
+
+#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
+# define PLATFORM_ID "Tru64"
+
+#elif defined(__riscos) || defined(__riscos__)
+# define PLATFORM_ID "RISCos"
+
+#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
+# define PLATFORM_ID "SINIX"
+
+#elif defined(__UNIX_SV__)
+# define PLATFORM_ID "UNIX_SV"
+
+#elif defined(__bsdos__)
+# define PLATFORM_ID "BSDOS"
+
+#elif defined(_MPRAS) || defined(MPRAS)
+# define PLATFORM_ID "MP-RAS"
+
+#elif defined(__osf) || defined(__osf__)
+# define PLATFORM_ID "OSF1"
+
+#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
+# define PLATFORM_ID "SCO_SV"
+
+#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
+# define PLATFORM_ID "ULTRIX"
+
+#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
+# define PLATFORM_ID "Xenix"
+
+#elif defined(__WATCOMC__)
+# if defined(__LINUX__)
+#  define PLATFORM_ID "Linux"
+
+# elif defined(__DOS__)
+#  define PLATFORM_ID "DOS"
+
+# elif defined(__OS2__)
+#  define PLATFORM_ID "OS2"
+
+# elif defined(__WINDOWS__)
+#  define PLATFORM_ID "Windows3x"
+
+# elif defined(__VXWORKS__)
+#  define PLATFORM_ID "VxWorks"
+
+# else /* unknown platform */
+#  define PLATFORM_ID
+# endif
+
+#elif defined(__INTEGRITY)
+# if defined(INT_178B)
+#  define PLATFORM_ID "Integrity178"
+
+# else /* regular Integrity */
+#  define PLATFORM_ID "Integrity"
+# endif
+
+# elif defined(_ADI_COMPILER)
+#  define PLATFORM_ID "ADSP"
+
+#else /* unknown platform */
+# define PLATFORM_ID
+
+#endif
+
+/* For windows compilers MSVC and Intel we can determine
+   the architecture of the compiler being used.  This is because
+   the compilers do not have flags that can change the architecture,
+   but rather depend on which compiler is being used
+*/
+#if defined(_WIN32) && defined(_MSC_VER)
+# if defined(_M_IA64)
+#  define ARCHITECTURE_ID "IA64"
+
+# elif defined(_M_ARM64EC)
+#  define ARCHITECTURE_ID "ARM64EC"
+
+# elif defined(_M_X64) || defined(_M_AMD64)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# elif defined(_M_ARM64)
+#  define ARCHITECTURE_ID "ARM64"
+
+# elif defined(_M_ARM)
+#  if _M_ARM == 4
+#   define ARCHITECTURE_ID "ARMV4I"
+#  elif _M_ARM == 5
+#   define ARCHITECTURE_ID "ARMV5I"
+#  else
+#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
+#  endif
+
+# elif defined(_M_MIPS)
+#  define ARCHITECTURE_ID "MIPS"
+
+# elif defined(_M_SH)
+#  define ARCHITECTURE_ID "SHx"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__WATCOMC__)
+# if defined(_M_I86)
+#  define ARCHITECTURE_ID "I86"
+
+# elif defined(_M_IX86)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
+# if defined(__ICCARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__ICCRX__)
+#  define ARCHITECTURE_ID "RX"
+
+# elif defined(__ICCRH850__)
+#  define ARCHITECTURE_ID "RH850"
+
+# elif defined(__ICCRL78__)
+#  define ARCHITECTURE_ID "RL78"
+
+# elif defined(__ICCRISCV__)
+#  define ARCHITECTURE_ID "RISCV"
+
+# elif defined(__ICCAVR__)
+#  define ARCHITECTURE_ID "AVR"
+
+# elif defined(__ICC430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__ICCV850__)
+#  define ARCHITECTURE_ID "V850"
+
+# elif defined(__ICC8051__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__ICCSTM8__)
+#  define ARCHITECTURE_ID "STM8"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__ghs__)
+# if defined(__PPC64__)
+#  define ARCHITECTURE_ID "PPC64"
+
+# elif defined(__ppc__)
+#  define ARCHITECTURE_ID "PPC"
+
+# elif defined(__ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__x86_64__)
+#  define ARCHITECTURE_ID "x64"
+
+# elif defined(__i386__)
+#  define ARCHITECTURE_ID "X86"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__clang__) && defined(__ti__)
+# if defined(__ARM_ARCH)
+#  define ARCHITECTURE_ID "Arm"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+#elif defined(__TI_COMPILER_VERSION__)
+# if defined(__TI_ARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__MSP430__)
+#  define ARCHITECTURE_ID "MSP430"
+
+# elif defined(__TMS320C28XX__)
+#  define ARCHITECTURE_ID "TMS320C28x"
+
+# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
+#  define ARCHITECTURE_ID "TMS320C6x"
+
+# else /* unknown architecture */
+#  define ARCHITECTURE_ID ""
+# endif
+
+# elif defined(__ADSPSHARC__)
+#  define ARCHITECTURE_ID "SHARC"
+
+# elif defined(__ADSPBLACKFIN__)
+#  define ARCHITECTURE_ID "Blackfin"
+
+#elif defined(__TASKING__)
+
+# if defined(__CTC__) || defined(__CPTC__)
+#  define ARCHITECTURE_ID "TriCore"
+
+# elif defined(__CMCS__)
+#  define ARCHITECTURE_ID "MCS"
+
+# elif defined(__CARM__)
+#  define ARCHITECTURE_ID "ARM"
+
+# elif defined(__CARC__)
+#  define ARCHITECTURE_ID "ARC"
+
+# elif defined(__C51__)
+#  define ARCHITECTURE_ID "8051"
+
+# elif defined(__CPCP__)
+#  define ARCHITECTURE_ID "PCP"
+
+# else
+#  define ARCHITECTURE_ID ""
+# endif
+
+#else
+#  define ARCHITECTURE_ID
+#endif
+
+/* Convert integer to decimal digit literals.  */
+#define DEC(n)                   \
+  ('0' + (((n) / 10000000)%10)), \
+  ('0' + (((n) / 1000000)%10)),  \
+  ('0' + (((n) / 100000)%10)),   \
+  ('0' + (((n) / 10000)%10)),    \
+  ('0' + (((n) / 1000)%10)),     \
+  ('0' + (((n) / 100)%10)),      \
+  ('0' + (((n) / 10)%10)),       \
+  ('0' +  ((n) % 10))
+
+/* Convert integer to hex digit literals.  */
+#define HEX(n)             \
+  ('0' + ((n)>>28 & 0xF)), \
+  ('0' + ((n)>>24 & 0xF)), \
+  ('0' + ((n)>>20 & 0xF)), \
+  ('0' + ((n)>>16 & 0xF)), \
+  ('0' + ((n)>>12 & 0xF)), \
+  ('0' + ((n)>>8  & 0xF)), \
+  ('0' + ((n)>>4  & 0xF)), \
+  ('0' + ((n)     & 0xF))
+
+/* Construct a string literal encoding the version number. */
+#ifdef COMPILER_VERSION
+char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
+
+/* Construct a string literal encoding the version number components. */
+#elif defined(COMPILER_VERSION_MAJOR)
+char const info_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
+  COMPILER_VERSION_MAJOR,
+# ifdef COMPILER_VERSION_MINOR
+  '.', COMPILER_VERSION_MINOR,
+#  ifdef COMPILER_VERSION_PATCH
+   '.', COMPILER_VERSION_PATCH,
+#   ifdef COMPILER_VERSION_TWEAK
+    '.', COMPILER_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct a string literal encoding the internal version number. */
+#ifdef COMPILER_VERSION_INTERNAL
+char const info_version_internal[] = {
+  'I', 'N', 'F', 'O', ':',
+  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
+  'i','n','t','e','r','n','a','l','[',
+  COMPILER_VERSION_INTERNAL,']','\0'};
+#elif defined(COMPILER_VERSION_INTERNAL_STR)
+char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
+#endif
+
+/* Construct a string literal encoding the version number components. */
+#ifdef SIMULATE_VERSION_MAJOR
+char const info_simulate_version[] = {
+  'I', 'N', 'F', 'O', ':',
+  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
+  SIMULATE_VERSION_MAJOR,
+# ifdef SIMULATE_VERSION_MINOR
+  '.', SIMULATE_VERSION_MINOR,
+#  ifdef SIMULATE_VERSION_PATCH
+   '.', SIMULATE_VERSION_PATCH,
+#   ifdef SIMULATE_VERSION_TWEAK
+    '.', SIMULATE_VERSION_TWEAK,
+#   endif
+#  endif
+# endif
+  ']','\0'};
+#endif
+
+/* Construct the string literal in pieces to prevent the source from
+   getting matched.  Store it in a pointer rather than an array
+   because some compilers will just produce instructions to fill the
+   array rather than assigning a pointer to a static array.  */
+char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
+char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
+
+
+
+#define CXX_STD_98 199711L
+#define CXX_STD_11 201103L
+#define CXX_STD_14 201402L
+#define CXX_STD_17 201703L
+#define CXX_STD_20 202002L
+#define CXX_STD_23 202302L
+
+#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > CXX_STD_17
+#    define CXX_STD _MSVC_LANG
+#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
+#    define CXX_STD CXX_STD_20
+#  elif _MSVC_LANG > CXX_STD_14
+#    define CXX_STD CXX_STD_17
+#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  elif defined(__INTEL_CXX11_MODE__)
+#    define CXX_STD CXX_STD_11
+#  else
+#    define CXX_STD CXX_STD_98
+#  endif
+#elif defined(_MSC_VER) && defined(_MSVC_LANG)
+#  if _MSVC_LANG > __cplusplus
+#    define CXX_STD _MSVC_LANG
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__NVCOMPILER)
+#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
+#    define CXX_STD CXX_STD_20
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif defined(__INTEL_COMPILER) || defined(__PGI)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
+#    define CXX_STD CXX_STD_17
+#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
+#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
+#    define CXX_STD CXX_STD_14
+#  else
+#    define CXX_STD __cplusplus
+#  endif
+#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
+#  define CXX_STD CXX_STD_11
+#else
+#  define CXX_STD __cplusplus
+#endif
+
+const char* info_language_standard_default = "INFO" ":" "standard_default["
+#if CXX_STD > CXX_STD_23
+  "26"
+#elif CXX_STD > CXX_STD_20
+  "23"
+#elif CXX_STD > CXX_STD_17
+  "20"
+#elif CXX_STD > CXX_STD_14
+  "17"
+#elif CXX_STD > CXX_STD_11
+  "14"
+#elif CXX_STD >= CXX_STD_11
+  "11"
+#else
+  "98"
+#endif
+"]";
+
+const char* info_language_extensions_default = "INFO" ":" "extensions_default["
+#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
+     defined(__TI_COMPILER_VERSION__)) &&                                     \
+  !defined(__STRICT_ANSI__)
+  "ON"
+#else
+  "OFF"
+#endif
+"]";
+
+/*--------------------------------------------------------------------------*/
+
+int main(int argc, char* argv[])
+{
+  int require = 0;
+  require += info_compiler[argc];
+  require += info_platform[argc];
+  require += info_arch[argc];
+#ifdef COMPILER_VERSION_MAJOR
+  require += info_version[argc];
+#endif
+#ifdef COMPILER_VERSION_INTERNAL
+  require += info_version_internal[argc];
+#endif
+#ifdef SIMULATE_ID
+  require += info_simulate[argc];
+#endif
+#ifdef SIMULATE_VERSION_MAJOR
+  require += info_simulate_version[argc];
+#endif
+#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
+  require += info_cray[argc];
+#endif
+  require += info_language_standard_default[argc];
+  require += info_language_extensions_default[argc];
+  (void)argv;
+  return require;
+}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
new file mode 100755
index 0000000000000000000000000000000000000000..78617c271080d9e2231a72abde01b7fc302df0f2
GIT binary patch
literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

literal 0
HcmV?d00001

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
new file mode 100644
index 00000000000..731c5465937
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
@@ -0,0 +1,562 @@
+
+---
+events:
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
+      Compiler: /usr/bin/cc 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
+      
+      The C compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
+      Compiler: /usr/bin/c++ 
+      Build flags: 
+      Id flags:  
+      
+      The output was:
+      0
+      
+      
+      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
+      
+      The CXX compiler identification is GNU, found in:
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
+      
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting C compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_C_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca
+        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s
+        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
+         as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.'
+        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/cc
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed C implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca]
+        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s]
+        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.']
+        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/cc]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/cc3hcm2q.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_834ca] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o] ==> ignore
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [-lc] ==> lib [c]
+          arg [-lgcc] ==> lib [gcc]
+          arg [--push-state] ==> ignore
+          arg [--as-needed] ==> ignore
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [--pop-state] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'C': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the C compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    checks:
+      - "Detecting CXX compiler ABI info"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: ""
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
+      CMAKE_EXE_LINKER_FLAGS: ""
+    buildResult:
+      variable: "CMAKE_CXX_ABI_COMPILED"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a
+        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s
+        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
+        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
+        
+        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
+        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
+        #include "..." search starts here:
+        #include <...> search starts here:
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
+         /usr/local/include
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
+         /usr/include
+        End of search list.
+        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
+         as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s
+        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.'
+        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :
+        Using built-in specs.
+        COLLECT_GCC=/usr/bin/c++
+        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
+        Target: x86_64-pc-linux-gnu
+        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
+        Thread model: posix
+        Supported LTO compression algorithms: zlib zstd
+        gcc version 14.2.1 20240910 (GCC) 
+        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
+        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
+         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        collect2 version 14.2.1 20240910
+        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
+        GNU ld (GNU Binutils) 2.43.0
+        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
+        
+      exitCode: 0
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit include dir info: rv=done
+        found start of include info
+        found start of implicit include info
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+          add: [/usr/local/include]
+          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+          add: [/usr/include]
+        end of search list found
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        collapse include dir [/usr/local/include] ==> [/usr/local/include]
+        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        collapse include dir [/usr/include] ==> [/usr/include]
+        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Parsed CXX implicit link information:
+        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
+        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
+        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc']
+        ignore line: []
+        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a]
+        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s]
+        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
+        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
+        ignore line: []
+        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
+        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
+        ignore line: [#include "..." search starts here:]
+        ignore line: [#include <...> search starts here:]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
+        ignore line: [ /usr/local/include]
+        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
+        ignore line: [ /usr/include]
+        ignore line: [End of search list.]
+        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
+        ignore line: [ as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s]
+        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.']
+        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :]
+        ignore line: [Using built-in specs.]
+        ignore line: [COLLECT_GCC=/usr/bin/c++]
+        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
+        ignore line: [Target: x86_64-pc-linux-gnu]
+        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
+        ignore line: [Thread model: posix]
+        ignore line: [Supported LTO compression algorithms: zlib zstd]
+        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
+        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
+        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
+        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.']
+        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
+          arg [-plugin] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
+          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
+          arg [-plugin-opt=-fresolution=/tmp/ccjzVWgz.res] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lc] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
+          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
+          arg [--build-id] ==> ignore
+          arg [--eh-frame-hdr] ==> ignore
+          arg [--hash-style=gnu] ==> ignore
+          arg [-m] ==> ignore
+          arg [elf_x86_64] ==> ignore
+          arg [-dynamic-linker] ==> ignore
+          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
+          arg [-pie] ==> ignore
+          arg [-o] ==> ignore
+          arg [cmTC_8a98a] ==> ignore
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
+          arg [-L/lib/../lib] ==> dir [/lib/../lib]
+          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
+          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
+          arg [-v] ==> ignore
+          arg [CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
+          arg [-lstdc++] ==> lib [stdc++]
+          arg [-lm] ==> lib [m]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [-lc] ==> lib [c]
+          arg [-lgcc_s] ==> lib [gcc_s]
+          arg [-lgcc] ==> lib [gcc]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
+          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        ignore line: [collect2 version 14.2.1 20240910]
+        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
+        linker tool for 'CXX': /usr/bin/ld
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
+        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
+        collapse library dir [/lib/../lib] ==> [/lib]
+        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
+        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
+        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
+        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
+        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
+        implicit fwks: []
+      
+      
+  -
+    kind: "message-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
+      - "CMakeLists.txt:11 (project)"
+    message: |
+      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
+      GNU ld (GNU Binutils) 2.43.0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
+      - "CMakeLists.txt:235 (find_package)"
+    checks:
+      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
+    cmakeVariables:
+      CMAKE_C_FLAGS: ""
+      CMAKE_C_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "CMAKE_HAVE_LIBC_PTHREAD"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_85c24
+        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_85c24.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk/src.c
+        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_85c24.dir/src.c.o -o cmTC_85c24   && :
+        
+      exitCode: 0
+  -
+    kind: "try_compile-v1"
+    backtrace:
+      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
+      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
+      - "CMakeLists.txt:544 (find_package)"
+    checks:
+      - "Looking for C++ include cereal/cereal.hpp"
+    directories:
+      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
+      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
+    cmakeVariables:
+      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
+      CMAKE_CXX_FLAGS_DEBUG: "-g"
+      CMAKE_EXE_LINKER_FLAGS: ""
+      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
+      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
+    buildResult:
+      variable: "HAVE_CEREAL_H"
+      cached: true
+      stdout: |
+        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2'
+        
+        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_e14a3
+        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
+        FAILED: CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o 
+        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
+        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
+            1 | #include <cereal/cereal.hpp>
+              |          ^~~~~~~~~~~~~~~~~~~
+        compilation terminated.
+        ninja: build stopped: subcommand failed.
+        
+      exitCode: 1
+...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
new file mode 100644
index 00000000000..79f8f4ca097
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
@@ -0,0 +1,66 @@
+/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
+-- The C compiler identification is GNU 14.2.1
+-- The CXX compiler identification is GNU 14.2.1
+-- Detecting C compiler ABI info
+-- Detecting C compiler ABI info - done
+-- Check for working C compiler: /usr/bin/cc - skipped
+-- Detecting C compile features
+-- Detecting C compile features - done
+-- Detecting CXX compiler ABI info
+-- Detecting CXX compiler ABI info - done
+-- Check for working CXX compiler: /usr/bin/c++ - skipped
+-- Detecting CXX compile features
+-- Detecting CXX compile features - done
+-- SLIC3R_ASAN: OFF
+-- SLIC3R_BUILD_SANDBOXES: OFF
+-- SLIC3R_BUILD_TESTS: OFF
+-- SLIC3R_DESKTOP_INTEGRATION: ON
+-- SLIC3R_FHS: OFF
+-- SLIC3R_GTK: 2
+-- SLIC3R_GUI: ON
+-- SLIC3R_MSVC_COMPILE_PARALLEL: ON
+-- SLIC3R_MSVC_PDB: ON
+-- SLIC3R_PCH: ON
+-- SLIC3R_PERL_XS: OFF
+-- SLIC3R_PROFILE: OFF
+-- SLIC3R_STATIC: OFF
+-- SLIC3R_WX_STABLE: OFF
+-- SLIC3R_STATIC: OFF
+-- CMAKE_PREFIX_PATH: (default)
+-- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
+-- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
+-- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
+-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
+-- Found Threads: TRUE
+-- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
+-- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
+-- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
+CMake Warning (dev) at CMakeLists.txt:415 (find_package):
+  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
+  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
+  set the policy and suppress this warning.
+
+This warning is for project developers.  Use -Wno-dev to suppress it.
+
+-- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
+-- TBB found in /usr/lib/cmake/TBB
+-- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
+-- Found CURL: /usr/lib/libcurl.so (found version "8.11.1") 
+-- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
+-- Found Eigen3: /usr/include/eigen3 (Required is at least version "3.3")
+-- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
+-- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
+-- Found OpenGL: /usr/lib/libOpenGL.so
+GLEW_ROOT: 
+-- Found GLEW: /usr/include (found version "2.2.0")
+-- Could NOT find cereal (missing: cereal_DIR)
+-- Looking for C++ include cereal/cereal.hpp
+-- Looking for C++ include cereal/cereal.hpp - not found
+CMake Error at cmake/modules/Findcereal.cmake:21 (message):
+  Cereal library not found.  Please install the dependency.
+Call Stack (most recent call first):
+  CMakeLists.txt:544 (find_package)
+
+
+-- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
new file mode 100644
index 00000000000..292290e6b02
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/clion-environment.txt
@@ -0,0 +1,4 @@
+ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
+Options: 
+
+Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
new file mode 100644
index 00000000000..3dccd731726
--- /dev/null
+++ b/cmake-build-debug/CMakeFiles/cmake.check_cache
@@ -0,0 +1 @@
+# This file is generated by cmake for dependency checking of the CMakeCache.txt file
diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index c8fdc74220b..7e6e041d4d1 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -673,6 +673,10 @@
             "name": "fdm_filament_bvoh",
             "sub_path": "filament/fdm_filament_bvoh.json"
         },
+        {
+            "name": "fdm_filament_sbs",
+            "sub_path": "filament/fdm_filament_sbs.json"
+        },
         {
             "name": "Bambu PLA Matte @base",
             "sub_path": "filament/Bambu PLA Matte @base.json"
@@ -737,6 +741,10 @@
             "name": "Bambu PLA-CF @base",
             "sub_path": "filament/Bambu PLA-CF @base.json"
         },
+        {
+            "name": "Generic SBS @base",
+            "sub_path": "filament/Generic SBS @base.json"
+        },
         {
             "name": "Bambu Support For PLA @base",
             "sub_path": "filament/Bambu Support For PLA @base.json"
@@ -1397,6 +1405,10 @@
             "name": "Generic PLA @BBL A1M",
             "sub_path": "filament/Generic PLA @BBL A1M.json"
         },
+        {
+            "name": "Generic SBS",
+            "sub_path": "filament/Generic SBS.json"
+        },
         {
             "name": "Generic PLA @BBL A1M 0.2 nozzle",
             "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"

From 0dc383d0be3934ce0ec67be915df76fb8aff13e7 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:53:13 +0100
Subject: [PATCH 27/59] fix: remove cmake-build-debug

---
 .../.cmake/api/v1/query/cache-v2              |   0
 .../.cmake/api/v1/query/cmakeFiles-v1         |   0
 .../.cmake/api/v1/query/codemodel-v2          |   0
 .../.cmake/api/v1/query/toolchains-v1         |   0
 cmake-build-debug/CMakeCache.txt              | 959 ------------------
 .../CMakeFiles/3.30.5/CMakeCCompiler.cmake    |  81 --
 .../CMakeFiles/3.30.5/CMakeCXXCompiler.cmake  | 105 --
 .../3.30.5/CMakeDetermineCompilerABI_C.bin    | Bin 15448 -> 0 bytes
 .../3.30.5/CMakeDetermineCompilerABI_CXX.bin  | Bin 15464 -> 0 bytes
 .../CMakeFiles/3.30.5/CMakeSystem.cmake       |  15 -
 .../3.30.5/CompilerIdC/CMakeCCompilerId.c     | 904 -----------------
 .../CMakeFiles/3.30.5/CompilerIdC/a.out       | Bin 15560 -> 0 bytes
 .../CompilerIdCXX/CMakeCXXCompilerId.cpp      | 919 -----------------
 .../CMakeFiles/3.30.5/CompilerIdCXX/a.out     | Bin 15576 -> 0 bytes
 .../CMakeFiles/CMakeConfigureLog.yaml         | 562 ----------
 .../CMakeFiles/clion-Debug-log.txt            |  66 --
 .../CMakeFiles/clion-environment.txt          |   4 -
 .../CMakeFiles/cmake.check_cache              |   1 -
 18 files changed, 3616 deletions(-)
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cache-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/codemodel-v2
 delete mode 100644 cmake-build-debug/.cmake/api/v1/query/toolchains-v1
 delete mode 100644 cmake-build-debug/CMakeCache.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
 delete mode 100755 cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
 delete mode 100644 cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-Debug-log.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/clion-environment.txt
 delete mode 100644 cmake-build-debug/CMakeFiles/cmake.check_cache

diff --git a/cmake-build-debug/.cmake/api/v1/query/cache-v2 b/cmake-build-debug/.cmake/api/v1/query/cache-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1 b/cmake-build-debug/.cmake/api/v1/query/cmakeFiles-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/codemodel-v2 b/cmake-build-debug/.cmake/api/v1/query/codemodel-v2
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/.cmake/api/v1/query/toolchains-v1 b/cmake-build-debug/.cmake/api/v1/query/toolchains-v1
deleted file mode 100644
index e69de29bb2d..00000000000
diff --git a/cmake-build-debug/CMakeCache.txt b/cmake-build-debug/CMakeCache.txt
deleted file mode 100644
index 001e9469232..00000000000
--- a/cmake-build-debug/CMakeCache.txt
+++ /dev/null
@@ -1,959 +0,0 @@
-# This is the CMakeCache file.
-# For build in directory: /home/scarjit/Git/OrcaSlicer/cmake-build-debug
-# It was generated by CMake: /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-# You can edit this file to change values found and used by cmake.
-# If you do not want to change any of the values, simply exit the editor.
-# If you do want to change a value, simply edit, save, and exit the editor.
-# The syntax for the file is as follows:
-# KEY:TYPE=VALUE
-# KEY is the name of a variable in the cache.
-# TYPE is a hint to GUIs for the type of VALUE, DO NOT EDIT TYPE!.
-# VALUE is the current value for the KEY.
-
-########################
-# EXTERNAL cache entries
-########################
-
-Boost_ATOMIC_LIBRARY_RELEASE:STRING=/usr/lib/libboost_atomic.so.1.86.0
-
-Boost_CHRONO_LIBRARY_RELEASE:STRING=/usr/lib/libboost_chrono.so.1.86.0
-
-Boost_DATE_TIME_LIBRARY_RELEASE:STRING=/usr/lib/libboost_date_time.so.1.86.0
-
-//The directory containing a CMake configuration file for Boost.
-Boost_DIR:PATH=/usr/lib/cmake/Boost-1.86.0
-
-Boost_FILESYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_filesystem.so.1.86.0
-
-//Path to a file.
-Boost_INCLUDE_DIR:PATH=/usr/include
-
-Boost_IOSTREAMS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_iostreams.so.1.86.0
-
-Boost_LOCALE_LIBRARY_RELEASE:STRING=/usr/lib/libboost_locale.so.1.86.0
-
-Boost_LOG_LIBRARY_RELEASE:STRING=/usr/lib/libboost_log.so.1.86.0
-
-Boost_PROGRAM_OPTIONS_LIBRARY_RELEASE:STRING=/usr/lib/libboost_program_options.so.1.86.0
-
-Boost_REGEX_LIBRARY_RELEASE:STRING=/usr/lib/libboost_regex.so.1.86.0
-
-Boost_SYSTEM_LIBRARY_RELEASE:STRING=/usr/lib/libboost_system.so.1.86.0
-
-Boost_THREAD_LIBRARY_RELEASE:STRING=/usr/lib/libboost_thread.so.1.86.0
-
-//Path to a program.
-CMAKE_ADDR2LINE:FILEPATH=/usr/bin/addr2line
-
-//Path to a program.
-CMAKE_AR:FILEPATH=/usr/bin/ar
-
-//Choose the type of build, options are: None Debug Release RelWithDebInfo
-// MinSizeRel ...
-CMAKE_BUILD_TYPE:STRING=Debug
-
-//Enable colored diagnostics throughout.
-CMAKE_COLOR_DIAGNOSTICS:BOOL=ON
-
-//CXX compiler
-CMAKE_CXX_COMPILER:FILEPATH=/usr/bin/c++
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_CXX_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the CXX compiler during all build types.
-CMAKE_CXX_FLAGS:STRING=
-
-//Flags used by the CXX compiler during DEBUG builds.
-CMAKE_CXX_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the CXX compiler during MINSIZEREL builds.
-CMAKE_CXX_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the CXX compiler during RELEASE builds.
-CMAKE_CXX_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the CXX compiler during RELWITHDEBINFO builds.
-CMAKE_CXX_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//C compiler
-CMAKE_C_COMPILER:FILEPATH=/usr/bin/cc
-
-//A wrapper around 'ar' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_AR:FILEPATH=/usr/bin/gcc-ar
-
-//A wrapper around 'ranlib' adding the appropriate '--plugin' option
-// for the GCC compiler
-CMAKE_C_COMPILER_RANLIB:FILEPATH=/usr/bin/gcc-ranlib
-
-//Flags used by the C compiler during all build types.
-CMAKE_C_FLAGS:STRING=
-
-//Flags used by the C compiler during DEBUG builds.
-CMAKE_C_FLAGS_DEBUG:STRING=-g
-
-//Flags used by the C compiler during MINSIZEREL builds.
-CMAKE_C_FLAGS_MINSIZEREL:STRING=-Os -DNDEBUG
-
-//Flags used by the C compiler during RELEASE builds.
-CMAKE_C_FLAGS_RELEASE:STRING=-O3 -DNDEBUG
-
-//Flags used by the C compiler during RELWITHDEBINFO builds.
-CMAKE_C_FLAGS_RELWITHDEBINFO:STRING=-O2 -g -DNDEBUG
-
-//Path to a program.
-CMAKE_DLLTOOL:FILEPATH=CMAKE_DLLTOOL-NOTFOUND
-
-//Flags used by the linker during all build types.
-CMAKE_EXE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during DEBUG builds.
-CMAKE_EXE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during MINSIZEREL builds.
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during RELEASE builds.
-CMAKE_EXE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during RELWITHDEBINFO builds.
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Enable/Disable output of compile commands during generation.
-CMAKE_EXPORT_COMPILE_COMMANDS:BOOL=
-
-//Value Computed by CMake.
-CMAKE_FIND_PACKAGE_REDIRECTS_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/pkgRedirects
-
-//User executables (bin)
-CMAKE_INSTALL_BINDIR:PATH=bin
-
-//Read-only architecture-independent data (DATAROOTDIR)
-CMAKE_INSTALL_DATADIR:PATH=
-
-//Read-only architecture-independent data root (share)
-CMAKE_INSTALL_DATAROOTDIR:PATH=share
-
-//Documentation root (DATAROOTDIR/doc/PROJECT_NAME)
-CMAKE_INSTALL_DOCDIR:PATH=
-
-//C header files (include)
-CMAKE_INSTALL_INCLUDEDIR:PATH=include
-
-//Info documentation (DATAROOTDIR/info)
-CMAKE_INSTALL_INFODIR:PATH=
-
-//Object code libraries (lib)
-CMAKE_INSTALL_LIBDIR:PATH=lib
-
-//Program executables (libexec)
-CMAKE_INSTALL_LIBEXECDIR:PATH=libexec
-
-//Locale-dependent data (DATAROOTDIR/locale)
-CMAKE_INSTALL_LOCALEDIR:PATH=
-
-//Modifiable single-machine data (var)
-CMAKE_INSTALL_LOCALSTATEDIR:PATH=var
-
-//Man documentation (DATAROOTDIR/man)
-CMAKE_INSTALL_MANDIR:PATH=
-
-//C header files for non-gcc (/usr/include)
-CMAKE_INSTALL_OLDINCLUDEDIR:PATH=/usr/include
-
-//Install path prefix, prepended onto install directories.
-CMAKE_INSTALL_PREFIX:PATH=/usr/local
-
-//Run-time variable data (LOCALSTATEDIR/run)
-CMAKE_INSTALL_RUNSTATEDIR:PATH=
-
-//System admin executables (sbin)
-CMAKE_INSTALL_SBINDIR:PATH=sbin
-
-//Modifiable architecture-independent data (com)
-CMAKE_INSTALL_SHAREDSTATEDIR:PATH=com
-
-//Read-only single-machine data (etc)
-CMAKE_INSTALL_SYSCONFDIR:PATH=etc
-
-//Path to a program.
-CMAKE_LINKER:FILEPATH=/usr/bin/ld
-
-//No help, variable specified on the command line.
-CMAKE_MAKE_PROGRAM:UNINITIALIZED=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-
-//Flags used by the linker during the creation of modules during
-// all build types.
-CMAKE_MODULE_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of modules during
-// DEBUG builds.
-CMAKE_MODULE_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of modules during
-// MINSIZEREL builds.
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELEASE builds.
-CMAKE_MODULE_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of modules during
-// RELWITHDEBINFO builds.
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_NM:FILEPATH=/usr/bin/nm
-
-//Path to a program.
-CMAKE_OBJCOPY:FILEPATH=/usr/bin/objcopy
-
-//Path to a program.
-CMAKE_OBJDUMP:FILEPATH=/usr/bin/objdump
-
-//Value Computed by CMake
-CMAKE_PROJECT_DESCRIPTION:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_HOMEPAGE_URL:STATIC=
-
-//Value Computed by CMake
-CMAKE_PROJECT_NAME:STATIC=OrcaSlicer
-
-//Path to a program.
-CMAKE_RANLIB:FILEPATH=/usr/bin/ranlib
-
-//Path to a program.
-CMAKE_READELF:FILEPATH=/usr/bin/readelf
-
-//Flags used by the linker during the creation of shared libraries
-// during all build types.
-CMAKE_SHARED_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during DEBUG builds.
-CMAKE_SHARED_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during MINSIZEREL builds.
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELEASE builds.
-CMAKE_SHARED_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of shared libraries
-// during RELWITHDEBINFO builds.
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//If set, runtime paths are not added when installing shared libraries,
-// but are added when building.
-CMAKE_SKIP_INSTALL_RPATH:BOOL=NO
-
-//If set, runtime paths are not added when using shared libraries.
-CMAKE_SKIP_RPATH:BOOL=NO
-
-//Flags used by the linker during the creation of static libraries
-// during all build types.
-CMAKE_STATIC_LINKER_FLAGS:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during DEBUG builds.
-CMAKE_STATIC_LINKER_FLAGS_DEBUG:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during MINSIZEREL builds.
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELEASE builds.
-CMAKE_STATIC_LINKER_FLAGS_RELEASE:STRING=
-
-//Flags used by the linker during the creation of static libraries
-// during RELWITHDEBINFO builds.
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO:STRING=
-
-//Path to a program.
-CMAKE_STRIP:FILEPATH=/usr/bin/strip
-
-//Path to a program.
-CMAKE_TAPI:FILEPATH=CMAKE_TAPI-NOTFOUND
-
-//If this value is on, makefiles will be generated without the
-// .SILENT directive, and all commands will be echoed to the console
-// during the make.  This is useful for debugging only. With Visual
-// Studio IDE projects all commands are done without /nologo.
-CMAKE_VERBOSE_MAKEFILE:BOOL=FALSE
-
-//Path to a file.
-CURL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-CURL_LIBRARY_DEBUG:FILEPATH=CURL_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-CURL_LIBRARY_RELEASE:FILEPATH=/usr/lib/libcurl.so
-
-//Path to a file.
-DBUS_ARCH_INCLUDE_DIR:PATH=/usr/lib/dbus-1.0/include
-
-//Path to a file.
-DBUS_INCLUDE_DIR:PATH=/usr/include/dbus-1.0
-
-//Path to a library.
-DBUS_LIBRARIES:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a file.
-EIGEN3_INCLUDE_DIR:PATH=/usr/include/eigen3
-
-//Path to a file.
-EXPAT_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-EXPAT_LIBRARY_DEBUG:FILEPATH=EXPAT_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-EXPAT_LIBRARY_RELEASE:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a file.
-GLEW_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_DEBUG:FILEPATH=GLEW_SHARED_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_SHARED_LIBRARY_RELEASE:FILEPATH=/usr/lib/libGLEW.so
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_DEBUG:FILEPATH=GLEW_STATIC_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-GLEW_STATIC_LIBRARY_RELEASE:FILEPATH=GLEW_STATIC_LIBRARY_RELEASE-NOTFOUND
-
-//Path to a file.
-OPENGL_EGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES2_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLES3_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLU_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_GLX_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a file.
-OPENGL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENGL_egl_LIBRARY:FILEPATH=/usr/lib/libEGL.so
-
-//Path to a library.
-OPENGL_gl_LIBRARY:FILEPATH=/usr/lib/libGL.so
-
-//Path to a library.
-OPENGL_gles2_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_gles3_LIBRARY:FILEPATH=/usr/lib/libGLESv2.so
-
-//Path to a library.
-OPENGL_glu_LIBRARY:FILEPATH=/usr/lib/libGLU.so
-
-//Path to a library.
-OPENGL_glx_LIBRARY:FILEPATH=/usr/lib/libGLX.so
-
-//Path to a library.
-OPENGL_opengl_LIBRARY:FILEPATH=/usr/lib/libOpenGL.so
-
-//Path to a file.
-OPENGL_xmesa_INCLUDE_DIR:PATH=OPENGL_xmesa_INCLUDE_DIR-NOTFOUND
-
-//Path to a library.
-OPENSSL_CRYPTO_LIBRARY:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a file.
-OPENSSL_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-OPENSSL_SSL_LIBRARY:FILEPATH=/usr/lib/libssl.so
-
-//Path to OpenVDB installation's find modules.
-OPENVDB_FIND_MODULE_PATH:PATH=
-
-//Build Orca tools
-ORCA_TOOLS:BOOL=OFF
-
-//Value Computed by CMake
-OrcaSlicer_BINARY_DIR:STATIC=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-
-//Value Computed by CMake
-OrcaSlicer_IS_TOP_LEVEL:STATIC=ON
-
-//Value Computed by CMake
-OrcaSlicer_SOURCE_DIR:STATIC=/home/scarjit/Git/OrcaSlicer
-
-//Arguments to supply to pkg-config
-PKG_CONFIG_ARGN:STRING=
-
-//pkg-config executable
-PKG_CONFIG_EXECUTABLE:FILEPATH=/usr/bin/pkg-config
-
-//Path to a library.
-PNG_LIBRARY_DEBUG:FILEPATH=PNG_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-PNG_LIBRARY_RELEASE:FILEPATH=/usr/lib/libpng.so
-
-//Path to a file.
-PNG_PNG_INCLUDE_DIR:PATH=/usr/include
-
-//Enable ASan on Clang and GCC
-SLIC3R_ASAN:BOOL=OFF
-
-//Build development sandboxes
-SLIC3R_BUILD_SANDBOXES:BOOL=OFF
-
-//Build unit tests
-SLIC3R_BUILD_TESTS:BOOL=OFF
-
-//Allow perfoming desktop integration during runtime
-SLIC3R_DESKTOP_INTEGRATION:BOOL=ON
-
-//Assume OrcaSlicer is to be installed in a FHS directory structure
-SLIC3R_FHS:BOOL=OFF
-
-//GTK version to use with wxWidgets on Linux
-SLIC3R_GTK:STRING=2
-
-//Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)
-SLIC3R_GUI:BOOL=ON
-
-//Compile on Visual Studio in parallel
-SLIC3R_MSVC_COMPILE_PARALLEL:BOOL=ON
-
-//Generate PDB files on MSVC in Release mode
-SLIC3R_MSVC_PDB:BOOL=ON
-
-//Use precompiled headers
-SLIC3R_PCH:BOOL=ON
-
-//Compile XS Perl module and enable Perl unit and integration tests
-SLIC3R_PERL_XS:BOOL=OFF
-
-//Compile OrcaSlicer with an invasive Shiny profiler
-SLIC3R_PROFILE:BOOL=OFF
-
-//Compile OrcaSlicer with static libraries (Boost, TBB, glew)
-SLIC3R_STATIC:BOOL=OFF
-
-//Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on
-// Linux
-SLIC3R_WX_STABLE:BOOL=OFF
-
-//The directory containing a CMake configuration file for TBB.
-TBB_DIR:PATH=/usr/lib/cmake/TBB
-
-//Path to a file.
-ZLIB_INCLUDE_DIR:PATH=/usr/include
-
-//Path to a library.
-ZLIB_LIBRARY_DEBUG:FILEPATH=ZLIB_LIBRARY_DEBUG-NOTFOUND
-
-//Path to a library.
-ZLIB_LIBRARY_RELEASE:FILEPATH=/usr/lib/libz.so
-
-//The directory containing a CMake configuration file for boost_atomic.
-boost_atomic_DIR:PATH=/usr/lib/cmake/boost_atomic-1.86.0
-
-//The directory containing a CMake configuration file for boost_chrono.
-boost_chrono_DIR:PATH=/usr/lib/cmake/boost_chrono-1.86.0
-
-//The directory containing a CMake configuration file for boost_date_time.
-boost_date_time_DIR:PATH=/usr/lib/cmake/boost_date_time-1.86.0
-
-//The directory containing a CMake configuration file for boost_filesystem.
-boost_filesystem_DIR:PATH=/usr/lib/cmake/boost_filesystem-1.86.0
-
-//The directory containing a CMake configuration file for boost_headers.
-boost_headers_DIR:PATH=/usr/lib/cmake/boost_headers-1.86.0
-
-//The directory containing a CMake configuration file for boost_iostreams.
-boost_iostreams_DIR:PATH=/usr/lib/cmake/boost_iostreams-1.86.0
-
-//The directory containing a CMake configuration file for boost_locale.
-boost_locale_DIR:PATH=/usr/lib/cmake/boost_locale-1.86.0
-
-//The directory containing a CMake configuration file for boost_log.
-boost_log_DIR:PATH=/usr/lib/cmake/boost_log-1.86.0
-
-//The directory containing a CMake configuration file for boost_program_options.
-boost_program_options_DIR:PATH=/usr/lib/cmake/boost_program_options-1.86.0
-
-//The directory containing a CMake configuration file for boost_regex.
-boost_regex_DIR:PATH=/usr/lib/cmake/boost_regex-1.86.0
-
-//The directory containing a CMake configuration file for boost_system.
-boost_system_DIR:PATH=/usr/lib/cmake/boost_system-1.86.0
-
-//The directory containing a CMake configuration file for boost_thread.
-boost_thread_DIR:PATH=/usr/lib/cmake/boost_thread-1.86.0
-
-//The directory containing a CMake configuration file for cereal.
-cereal_DIR:PATH=cereal_DIR-NOTFOUND
-
-//The directory containing a CMake configuration file for glfw3.
-glfw3_DIR:PATH=/usr/lib/cmake/glfw3
-
-//Path to a library.
-pkgcfg_lib_PC_DBUS_dbus-1:FILEPATH=/usr/lib/libdbus-1.so
-
-//Path to a library.
-pkgcfg_lib_PC_EXPAT_expat:FILEPATH=/usr/lib/libexpat.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_crypto:FILEPATH=/usr/lib/libcrypto.so
-
-//Path to a library.
-pkgcfg_lib__OPENSSL_ssl:FILEPATH=/usr/lib/libssl.so
-
-
-########################
-# INTERNAL cache entries
-########################
-
-//ADVANCED property for variable: Boost_DIR
-Boost_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_ADDR2LINE
-CMAKE_ADDR2LINE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_AR
-CMAKE_AR-ADVANCED:INTERNAL=1
-//This is the directory where this CMakeCache.txt was created
-CMAKE_CACHEFILE_DIR:INTERNAL=/home/scarjit/Git/OrcaSlicer/cmake-build-debug
-//Major version of cmake used to create the current loaded cache
-CMAKE_CACHE_MAJOR_VERSION:INTERNAL=3
-//Minor version of cmake used to create the current loaded cache
-CMAKE_CACHE_MINOR_VERSION:INTERNAL=30
-//Patch version of cmake used to create the current loaded cache
-CMAKE_CACHE_PATCH_VERSION:INTERNAL=5
-//Path to CMake executable.
-CMAKE_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake
-//Path to cpack program executable.
-CMAKE_CPACK_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cpack
-//Path to ctest program executable.
-CMAKE_CTEST_COMMAND:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/ctest
-//ADVANCED property for variable: CMAKE_CXX_COMPILER
-CMAKE_CXX_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_AR
-CMAKE_CXX_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_COMPILER_RANLIB
-CMAKE_CXX_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS
-CMAKE_CXX_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_DEBUG
-CMAKE_CXX_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_MINSIZEREL
-CMAKE_CXX_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELEASE
-CMAKE_CXX_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_CXX_FLAGS_RELWITHDEBINFO
-CMAKE_CXX_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER
-CMAKE_C_COMPILER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_AR
-CMAKE_C_COMPILER_AR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_COMPILER_RANLIB
-CMAKE_C_COMPILER_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS
-CMAKE_C_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_DEBUG
-CMAKE_C_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_MINSIZEREL
-CMAKE_C_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELEASE
-CMAKE_C_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_C_FLAGS_RELWITHDEBINFO
-CMAKE_C_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_DLLTOOL
-CMAKE_DLLTOOL-ADVANCED:INTERNAL=1
-//Executable file format
-CMAKE_EXECUTABLE_FORMAT:INTERNAL=ELF
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS
-CMAKE_EXE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_DEBUG
-CMAKE_EXE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_MINSIZEREL
-CMAKE_EXE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELEASE
-CMAKE_EXE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_EXPORT_COMPILE_COMMANDS
-CMAKE_EXPORT_COMPILE_COMMANDS-ADVANCED:INTERNAL=1
-//Name of external makefile project generator.
-CMAKE_EXTRA_GENERATOR:INTERNAL=
-//Name of generator.
-CMAKE_GENERATOR:INTERNAL=Ninja
-//Generator instance identifier.
-CMAKE_GENERATOR_INSTANCE:INTERNAL=
-//Name of generator platform.
-CMAKE_GENERATOR_PLATFORM:INTERNAL=
-//Name of generator toolset.
-CMAKE_GENERATOR_TOOLSET:INTERNAL=
-//Test CMAKE_HAVE_LIBC_PTHREAD
-CMAKE_HAVE_LIBC_PTHREAD:INTERNAL=1
-//Source directory with the top level CMakeLists.txt file for this
-// project
-CMAKE_HOME_DIRECTORY:INTERNAL=/home/scarjit/Git/OrcaSlicer
-//ADVANCED property for variable: CMAKE_INSTALL_BINDIR
-CMAKE_INSTALL_BINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATADIR
-CMAKE_INSTALL_DATADIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DATAROOTDIR
-CMAKE_INSTALL_DATAROOTDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_DOCDIR
-CMAKE_INSTALL_DOCDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INCLUDEDIR
-CMAKE_INSTALL_INCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_INFODIR
-CMAKE_INSTALL_INFODIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBDIR
-CMAKE_INSTALL_LIBDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LIBEXECDIR
-CMAKE_INSTALL_LIBEXECDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALEDIR
-CMAKE_INSTALL_LOCALEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_LOCALSTATEDIR
-CMAKE_INSTALL_LOCALSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_MANDIR
-CMAKE_INSTALL_MANDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_OLDINCLUDEDIR
-CMAKE_INSTALL_OLDINCLUDEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_RUNSTATEDIR
-CMAKE_INSTALL_RUNSTATEDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SBINDIR
-CMAKE_INSTALL_SBINDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_INSTALL_SHAREDSTATEDIR
-CMAKE_INSTALL_SHAREDSTATEDIR-ADVANCED:INTERNAL=1
-//Install .so files without execute permission.
-CMAKE_INSTALL_SO_NO_EXE:INTERNAL=0
-//ADVANCED property for variable: CMAKE_INSTALL_SYSCONFDIR
-CMAKE_INSTALL_SYSCONFDIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_LINKER
-CMAKE_LINKER-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS
-CMAKE_MODULE_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_DEBUG
-CMAKE_MODULE_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL
-CMAKE_MODULE_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELEASE
-CMAKE_MODULE_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_MODULE_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_NM
-CMAKE_NM-ADVANCED:INTERNAL=1
-//number of local generators
-CMAKE_NUMBER_OF_MAKEFILES:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJCOPY
-CMAKE_OBJCOPY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_OBJDUMP
-CMAKE_OBJDUMP-ADVANCED:INTERNAL=1
-//Platform information initialized
-CMAKE_PLATFORM_INFO_INITIALIZED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_RANLIB
-CMAKE_RANLIB-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_READELF
-CMAKE_READELF-ADVANCED:INTERNAL=1
-//Path to CMake installation.
-CMAKE_ROOT:INTERNAL=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS
-CMAKE_SHARED_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_DEBUG
-CMAKE_SHARED_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL
-CMAKE_SHARED_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELEASE
-CMAKE_SHARED_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_SHARED_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_INSTALL_RPATH
-CMAKE_SKIP_INSTALL_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_SKIP_RPATH
-CMAKE_SKIP_RPATH-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS
-CMAKE_STATIC_LINKER_FLAGS-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_DEBUG
-CMAKE_STATIC_LINKER_FLAGS_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL
-CMAKE_STATIC_LINKER_FLAGS_MINSIZEREL-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELEASE
-CMAKE_STATIC_LINKER_FLAGS_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO
-CMAKE_STATIC_LINKER_FLAGS_RELWITHDEBINFO-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_STRIP
-CMAKE_STRIP-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CMAKE_TAPI
-CMAKE_TAPI-ADVANCED:INTERNAL=1
-//uname command
-CMAKE_UNAME:INTERNAL=/usr/bin/uname
-//ADVANCED property for variable: CMAKE_VERBOSE_MAKEFILE
-CMAKE_VERBOSE_MAKEFILE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_INCLUDE_DIR
-CURL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_DEBUG
-CURL_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: CURL_LIBRARY_RELEASE
-CURL_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EIGEN3_INCLUDE_DIR
-EIGEN3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_INCLUDE_DIR
-EXPAT_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_DEBUG
-EXPAT_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: EXPAT_LIBRARY_RELEASE
-EXPAT_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Details about finding Boost
-FIND_PACKAGE_MESSAGE_DETAILS_Boost:INTERNAL=[/usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake][cfound components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options ][v1.86.0(1.66)]
-//Details about finding CURL
-FIND_PACKAGE_MESSAGE_DETAILS_CURL:INTERNAL=[/usr/lib/libcurl.so][/usr/include][v8.11.1()]
-//Details about finding DBus
-FIND_PACKAGE_MESSAGE_DETAILS_DBus:INTERNAL=[/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include][/usr/lib/libdbus-1.so][v()]
-//Details about finding EXPAT
-FIND_PACKAGE_MESSAGE_DETAILS_EXPAT:INTERNAL=[/usr/lib/libexpat.so][/usr/include][v2.6.4()]
-//Details about finding Eigen3
-FIND_PACKAGE_MESSAGE_DETAILS_Eigen3:INTERNAL=[/usr/include/eigen3][TRUE][v(3.3)]
-//Details about finding GLEW
-FIND_PACKAGE_MESSAGE_DETAILS_GLEW:INTERNAL=[/usr/include][/usr/lib/libGLEW.so][v2.2.0()]
-//Details about finding OpenGL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenGL:INTERNAL=[/usr/lib/libOpenGL.so][/usr/lib/libGLX.so][/usr/include][c ][v()]
-//Details about finding OpenSSL
-FIND_PACKAGE_MESSAGE_DETAILS_OpenSSL:INTERNAL=[/usr/lib/libcrypto.so][/usr/include][c ][v3.4.0()]
-//Details about finding PNG
-FIND_PACKAGE_MESSAGE_DETAILS_PNG:INTERNAL=[/usr/lib/libpng.so][/usr/include][v1.6.44()]
-//Details about finding PkgConfig
-FIND_PACKAGE_MESSAGE_DETAILS_PkgConfig:INTERNAL=[/usr/bin/pkg-config][v2.3.0()]
-//Details about finding Threads
-FIND_PACKAGE_MESSAGE_DETAILS_Threads:INTERNAL=[TRUE][v()]
-//Details about finding ZLIB
-FIND_PACKAGE_MESSAGE_DETAILS_ZLIB:INTERNAL=[/usr/lib/libz.so][/usr/include][c ][v1.3.1()]
-//ADVANCED property for variable: GLEW_INCLUDE_DIR
-GLEW_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_DEBUG
-GLEW_SHARED_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_SHARED_LIBRARY_RELEASE
-GLEW_SHARED_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_DEBUG
-GLEW_STATIC_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: GLEW_STATIC_LIBRARY_RELEASE
-GLEW_STATIC_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//Have include cereal/cereal.hpp
-HAVE_CEREAL_H:INTERNAL=
-//ADVANCED property for variable: OPENGL_EGL_INCLUDE_DIR
-OPENGL_EGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES2_INCLUDE_DIR
-OPENGL_GLES2_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLES3_INCLUDE_DIR
-OPENGL_GLES3_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLU_INCLUDE_DIR
-OPENGL_GLU_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_GLX_INCLUDE_DIR
-OPENGL_GLX_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_INCLUDE_DIR
-OPENGL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_egl_LIBRARY
-OPENGL_egl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gl_LIBRARY
-OPENGL_gl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles2_LIBRARY
-OPENGL_gles2_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_gles3_LIBRARY
-OPENGL_gles3_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glu_LIBRARY
-OPENGL_glu_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_glx_LIBRARY
-OPENGL_glx_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_opengl_LIBRARY
-OPENGL_opengl_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENGL_xmesa_INCLUDE_DIR
-OPENGL_xmesa_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_CRYPTO_LIBRARY
-OPENSSL_CRYPTO_LIBRARY-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_INCLUDE_DIR
-OPENSSL_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: OPENSSL_SSL_LIBRARY
-OPENSSL_SSL_LIBRARY-ADVANCED:INTERNAL=1
-PC_DBUS_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_CFLAGS_I:INTERNAL=
-PC_DBUS_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_FOUND:INTERNAL=1
-PC_DBUS_INCLUDEDIR:INTERNAL=/usr/include
-PC_DBUS_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1
-PC_DBUS_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_LIBDIR:INTERNAL=/usr/lib
-PC_DBUS_LIBRARIES:INTERNAL=dbus-1
-PC_DBUS_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_LIBS:INTERNAL=
-PC_DBUS_LIBS_L:INTERNAL=
-PC_DBUS_LIBS_OTHER:INTERNAL=
-PC_DBUS_LIBS_PATHS:INTERNAL=
-PC_DBUS_MODULE_NAME:INTERNAL=dbus-1
-PC_DBUS_PREFIX:INTERNAL=/usr
-PC_DBUS_STATIC_CFLAGS:INTERNAL=-I/usr/include/dbus-1.0;-I/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_CFLAGS_I:INTERNAL=
-PC_DBUS_STATIC_CFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
-PC_DBUS_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-ldbus-1;-lsystemd
-PC_DBUS_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBDIR:INTERNAL=
-PC_DBUS_STATIC_LIBRARIES:INTERNAL=dbus-1;systemd
-PC_DBUS_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_DBUS_STATIC_LIBS:INTERNAL=
-PC_DBUS_STATIC_LIBS_L:INTERNAL=
-PC_DBUS_STATIC_LIBS_OTHER:INTERNAL=
-PC_DBUS_STATIC_LIBS_PATHS:INTERNAL=
-PC_DBUS_VERSION:INTERNAL=1.14.10
-PC_DBUS_dbus-1_INCLUDEDIR:INTERNAL=
-PC_DBUS_dbus-1_LIBDIR:INTERNAL=
-PC_DBUS_dbus-1_PREFIX:INTERNAL=
-PC_DBUS_dbus-1_VERSION:INTERNAL=
-PC_EXPAT_CFLAGS:INTERNAL=-I/usr/include
-PC_EXPAT_CFLAGS_I:INTERNAL=
-PC_EXPAT_CFLAGS_OTHER:INTERNAL=
-PC_EXPAT_FOUND:INTERNAL=1
-PC_EXPAT_INCLUDEDIR:INTERNAL=/usr/include
-PC_EXPAT_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat
-PC_EXPAT_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_LIBDIR:INTERNAL=/usr/lib
-PC_EXPAT_LIBRARIES:INTERNAL=expat
-PC_EXPAT_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_LIBS:INTERNAL=
-PC_EXPAT_LIBS_L:INTERNAL=
-PC_EXPAT_LIBS_OTHER:INTERNAL=
-PC_EXPAT_LIBS_PATHS:INTERNAL=
-PC_EXPAT_MODULE_NAME:INTERNAL=expat
-PC_EXPAT_PREFIX:INTERNAL=/usr
-PC_EXPAT_STATIC_CFLAGS:INTERNAL=-I/usr/include;-DXML_STATIC
-PC_EXPAT_STATIC_CFLAGS_I:INTERNAL=
-PC_EXPAT_STATIC_CFLAGS_OTHER:INTERNAL=-DXML_STATIC
-PC_EXPAT_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-PC_EXPAT_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lexpat;-lm
-PC_EXPAT_STATIC_LDFLAGS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBDIR:INTERNAL=
-PC_EXPAT_STATIC_LIBRARIES:INTERNAL=expat;m
-PC_EXPAT_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-PC_EXPAT_STATIC_LIBS:INTERNAL=
-PC_EXPAT_STATIC_LIBS_L:INTERNAL=
-PC_EXPAT_STATIC_LIBS_OTHER:INTERNAL=
-PC_EXPAT_STATIC_LIBS_PATHS:INTERNAL=
-PC_EXPAT_VERSION:INTERNAL=2.6.4
-PC_EXPAT_expat_INCLUDEDIR:INTERNAL=
-PC_EXPAT_expat_LIBDIR:INTERNAL=
-PC_EXPAT_expat_PREFIX:INTERNAL=
-PC_EXPAT_expat_VERSION:INTERNAL=
-//ADVANCED property for variable: PKG_CONFIG_ARGN
-PKG_CONFIG_ARGN-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PKG_CONFIG_EXECUTABLE
-PKG_CONFIG_EXECUTABLE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_DEBUG
-PNG_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_LIBRARY_RELEASE
-PNG_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: PNG_PNG_INCLUDE_DIR
-PNG_PNG_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_INCLUDE_DIR
-ZLIB_INCLUDE_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_DEBUG
-ZLIB_LIBRARY_DEBUG-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: ZLIB_LIBRARY_RELEASE
-ZLIB_LIBRARY_RELEASE-ADVANCED:INTERNAL=1
-//linker supports push/pop state
-_CMAKE_LINKER_PUSHPOP_STATE_SUPPORTED:INTERNAL=TRUE
-//CMAKE_INSTALL_PREFIX during last run
-_GNUInstallDirs_LAST_CMAKE_INSTALL_PREFIX:INTERNAL=/usr/local
-_OPENSSL_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_CFLAGS_I:INTERNAL=
-_OPENSSL_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_FOUND:INTERNAL=1
-_OPENSSL_INCLUDEDIR:INTERNAL=/usr/include
-_OPENSSL_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto
-_OPENSSL_LDFLAGS_OTHER:INTERNAL=
-_OPENSSL_LIBDIR:INTERNAL=/usr/lib
-_OPENSSL_LIBRARIES:INTERNAL=ssl;crypto
-_OPENSSL_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_LIBS:INTERNAL=
-_OPENSSL_LIBS_L:INTERNAL=
-_OPENSSL_LIBS_OTHER:INTERNAL=
-_OPENSSL_LIBS_PATHS:INTERNAL=
-_OPENSSL_MODULE_NAME:INTERNAL=openssl
-_OPENSSL_PREFIX:INTERNAL=/usr
-_OPENSSL_STATIC_CFLAGS:INTERNAL=-I/usr/include
-_OPENSSL_STATIC_CFLAGS_I:INTERNAL=
-_OPENSSL_STATIC_CFLAGS_OTHER:INTERNAL=
-_OPENSSL_STATIC_INCLUDE_DIRS:INTERNAL=/usr/include
-_OPENSSL_STATIC_LDFLAGS:INTERNAL=-L/usr/lib;-lssl;-lcrypto;-ldl;-pthread
-_OPENSSL_STATIC_LDFLAGS_OTHER:INTERNAL=-pthread
-_OPENSSL_STATIC_LIBDIR:INTERNAL=
-_OPENSSL_STATIC_LIBRARIES:INTERNAL=ssl;crypto;dl
-_OPENSSL_STATIC_LIBRARY_DIRS:INTERNAL=/usr/lib
-_OPENSSL_STATIC_LIBS:INTERNAL=
-_OPENSSL_STATIC_LIBS_L:INTERNAL=
-_OPENSSL_STATIC_LIBS_OTHER:INTERNAL=
-_OPENSSL_STATIC_LIBS_PATHS:INTERNAL=
-_OPENSSL_VERSION:INTERNAL=3.4.0
-_OPENSSL_openssl_INCLUDEDIR:INTERNAL=
-_OPENSSL_openssl_LIBDIR:INTERNAL=
-_OPENSSL_openssl_PREFIX:INTERNAL=
-_OPENSSL_openssl_VERSION:INTERNAL=
-__pkg_config_arguments_PC_DBUS:INTERNAL=QUIET;dbus-1
-__pkg_config_arguments_PC_EXPAT:INTERNAL=QUIET;expat
-__pkg_config_arguments__OPENSSL:INTERNAL=QUIET;openssl
-__pkg_config_checked_PC_DBUS:INTERNAL=1
-__pkg_config_checked_PC_EXPAT:INTERNAL=1
-__pkg_config_checked__OPENSSL:INTERNAL=1
-//ADVANCED property for variable: boost_atomic_DIR
-boost_atomic_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_chrono_DIR
-boost_chrono_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_date_time_DIR
-boost_date_time_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_filesystem_DIR
-boost_filesystem_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_headers_DIR
-boost_headers_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_iostreams_DIR
-boost_iostreams_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_locale_DIR
-boost_locale_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_log_DIR
-boost_log_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_program_options_DIR
-boost_program_options_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_regex_DIR
-boost_regex_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_system_DIR
-boost_system_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: boost_thread_DIR
-boost_thread_DIR-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_DBUS_dbus-1
-pkgcfg_lib_PC_DBUS_dbus-1-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib_PC_EXPAT_expat
-pkgcfg_lib_PC_EXPAT_expat-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_crypto
-pkgcfg_lib__OPENSSL_crypto-ADVANCED:INTERNAL=1
-//ADVANCED property for variable: pkgcfg_lib__OPENSSL_ssl
-pkgcfg_lib__OPENSSL_ssl-ADVANCED:INTERNAL=1
-prefix_result:INTERNAL=/usr/lib
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
deleted file mode 100644
index d69cb8dd938..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCCompiler.cmake
+++ /dev/null
@@ -1,81 +0,0 @@
-set(CMAKE_C_COMPILER "/usr/bin/cc")
-set(CMAKE_C_COMPILER_ARG1 "")
-set(CMAKE_C_COMPILER_ID "GNU")
-set(CMAKE_C_COMPILER_VERSION "14.2.1")
-set(CMAKE_C_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_C_COMPILER_WRAPPER "")
-set(CMAKE_C_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_C_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_C_STANDARD_LATEST "23")
-set(CMAKE_C_COMPILE_FEATURES "c_std_90;c_function_prototypes;c_std_99;c_restrict;c_variadic_macros;c_std_11;c_static_assert;c_std_17;c_std_23")
-set(CMAKE_C90_COMPILE_FEATURES "c_std_90;c_function_prototypes")
-set(CMAKE_C99_COMPILE_FEATURES "c_std_99;c_restrict;c_variadic_macros")
-set(CMAKE_C11_COMPILE_FEATURES "c_std_11;c_static_assert")
-set(CMAKE_C17_COMPILE_FEATURES "c_std_17")
-set(CMAKE_C23_COMPILE_FEATURES "c_std_23")
-
-set(CMAKE_C_PLATFORM_ID "Linux")
-set(CMAKE_C_SIMULATE_ID "")
-set(CMAKE_C_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_C_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_C_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_C_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_C_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_C_COMPILER_LINKER_ID "GNU")
-set(CMAKE_C_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_C_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCC 1)
-set(CMAKE_C_COMPILER_LOADED 1)
-set(CMAKE_C_COMPILER_WORKS TRUE)
-set(CMAKE_C_ABI_COMPILED TRUE)
-
-set(CMAKE_C_COMPILER_ENV_VAR "CC")
-
-set(CMAKE_C_COMPILER_ID_RUN 1)
-set(CMAKE_C_SOURCE_FILE_EXTENSIONS c;m)
-set(CMAKE_C_IGNORE_EXTENSIONS h;H;o;O;obj;OBJ;def;DEF;rc;RC)
-set(CMAKE_C_LINKER_PREFERENCE 10)
-set(CMAKE_C_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_C_SIZEOF_DATA_PTR "8")
-set(CMAKE_C_COMPILER_ABI "ELF")
-set(CMAKE_C_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_C_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_C_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_C_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_C_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_C_COMPILER_ABI}")
-endif()
-
-if(CMAKE_C_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_C_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_C_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_C_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_C_IMPLICIT_INCLUDE_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_C_IMPLICIT_LINK_LIBRARIES "gcc;gcc_s;c;gcc;gcc_s")
-set(CMAKE_C_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_C_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
deleted file mode 100644
index 7a492576727..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeCXXCompiler.cmake
+++ /dev/null
@@ -1,105 +0,0 @@
-set(CMAKE_CXX_COMPILER "/usr/bin/c++")
-set(CMAKE_CXX_COMPILER_ARG1 "")
-set(CMAKE_CXX_COMPILER_ID "GNU")
-set(CMAKE_CXX_COMPILER_VERSION "14.2.1")
-set(CMAKE_CXX_COMPILER_VERSION_INTERNAL "")
-set(CMAKE_CXX_COMPILER_WRAPPER "")
-set(CMAKE_CXX_STANDARD_COMPUTED_DEFAULT "17")
-set(CMAKE_CXX_EXTENSIONS_COMPUTED_DEFAULT "ON")
-set(CMAKE_CXX_STANDARD_LATEST "26")
-set(CMAKE_CXX_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters;cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates;cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates;cxx_std_17;cxx_std_20;cxx_std_23;cxx_std_26")
-set(CMAKE_CXX98_COMPILE_FEATURES "cxx_std_98;cxx_template_template_parameters")
-set(CMAKE_CXX11_COMPILE_FEATURES "cxx_std_11;cxx_alias_templates;cxx_alignas;cxx_alignof;cxx_attributes;cxx_auto_type;cxx_constexpr;cxx_decltype;cxx_decltype_incomplete_return_types;cxx_default_function_template_args;cxx_defaulted_functions;cxx_defaulted_move_initializers;cxx_delegating_constructors;cxx_deleted_functions;cxx_enum_forward_declarations;cxx_explicit_conversions;cxx_extended_friend_declarations;cxx_extern_templates;cxx_final;cxx_func_identifier;cxx_generalized_initializers;cxx_inheriting_constructors;cxx_inline_namespaces;cxx_lambdas;cxx_local_type_template_args;cxx_long_long_type;cxx_noexcept;cxx_nonstatic_member_init;cxx_nullptr;cxx_override;cxx_range_for;cxx_raw_string_literals;cxx_reference_qualified_functions;cxx_right_angle_brackets;cxx_rvalue_references;cxx_sizeof_member;cxx_static_assert;cxx_strong_enums;cxx_thread_local;cxx_trailing_return_types;cxx_unicode_literals;cxx_uniform_initialization;cxx_unrestricted_unions;cxx_user_literals;cxx_variadic_macros;cxx_variadic_templates")
-set(CMAKE_CXX14_COMPILE_FEATURES "cxx_std_14;cxx_aggregate_default_initializers;cxx_attribute_deprecated;cxx_binary_literals;cxx_contextual_conversions;cxx_decltype_auto;cxx_digit_separators;cxx_generic_lambdas;cxx_lambda_init_captures;cxx_relaxed_constexpr;cxx_return_type_deduction;cxx_variable_templates")
-set(CMAKE_CXX17_COMPILE_FEATURES "cxx_std_17")
-set(CMAKE_CXX20_COMPILE_FEATURES "cxx_std_20")
-set(CMAKE_CXX23_COMPILE_FEATURES "cxx_std_23")
-set(CMAKE_CXX26_COMPILE_FEATURES "cxx_std_26")
-
-set(CMAKE_CXX_PLATFORM_ID "Linux")
-set(CMAKE_CXX_SIMULATE_ID "")
-set(CMAKE_CXX_COMPILER_FRONTEND_VARIANT "GNU")
-set(CMAKE_CXX_SIMULATE_VERSION "")
-
-
-
-
-set(CMAKE_AR "/usr/bin/ar")
-set(CMAKE_CXX_COMPILER_AR "/usr/bin/gcc-ar")
-set(CMAKE_RANLIB "/usr/bin/ranlib")
-set(CMAKE_CXX_COMPILER_RANLIB "/usr/bin/gcc-ranlib")
-set(CMAKE_LINKER "/usr/bin/ld")
-set(CMAKE_LINKER_LINK "")
-set(CMAKE_LINKER_LLD "")
-set(CMAKE_CXX_COMPILER_LINKER "/usr/bin/ld")
-set(CMAKE_CXX_COMPILER_LINKER_ID "GNU")
-set(CMAKE_CXX_COMPILER_LINKER_VERSION 2.43.0)
-set(CMAKE_CXX_COMPILER_LINKER_FRONTEND_VARIANT GNU)
-set(CMAKE_MT "")
-set(CMAKE_TAPI "CMAKE_TAPI-NOTFOUND")
-set(CMAKE_COMPILER_IS_GNUCXX 1)
-set(CMAKE_CXX_COMPILER_LOADED 1)
-set(CMAKE_CXX_COMPILER_WORKS TRUE)
-set(CMAKE_CXX_ABI_COMPILED TRUE)
-
-set(CMAKE_CXX_COMPILER_ENV_VAR "CXX")
-
-set(CMAKE_CXX_COMPILER_ID_RUN 1)
-set(CMAKE_CXX_SOURCE_FILE_EXTENSIONS C;M;c++;cc;cpp;cxx;m;mm;mpp;CPP;ixx;cppm;ccm;cxxm;c++m)
-set(CMAKE_CXX_IGNORE_EXTENSIONS inl;h;hpp;HPP;H;o;O;obj;OBJ;def;DEF;rc;RC)
-
-foreach (lang IN ITEMS C OBJC OBJCXX)
-  if (CMAKE_${lang}_COMPILER_ID_RUN)
-    foreach(extension IN LISTS CMAKE_${lang}_SOURCE_FILE_EXTENSIONS)
-      list(REMOVE_ITEM CMAKE_CXX_SOURCE_FILE_EXTENSIONS ${extension})
-    endforeach()
-  endif()
-endforeach()
-
-set(CMAKE_CXX_LINKER_PREFERENCE 30)
-set(CMAKE_CXX_LINKER_PREFERENCE_PROPAGATES 1)
-set(CMAKE_CXX_LINKER_DEPFILE_SUPPORTED FALSE)
-
-# Save compiler ABI information.
-set(CMAKE_CXX_SIZEOF_DATA_PTR "8")
-set(CMAKE_CXX_COMPILER_ABI "ELF")
-set(CMAKE_CXX_BYTE_ORDER "LITTLE_ENDIAN")
-set(CMAKE_CXX_LIBRARY_ARCHITECTURE "")
-
-if(CMAKE_CXX_SIZEOF_DATA_PTR)
-  set(CMAKE_SIZEOF_VOID_P "${CMAKE_CXX_SIZEOF_DATA_PTR}")
-endif()
-
-if(CMAKE_CXX_COMPILER_ABI)
-  set(CMAKE_INTERNAL_PLATFORM_ABI "${CMAKE_CXX_COMPILER_ABI}")
-endif()
-
-if(CMAKE_CXX_LIBRARY_ARCHITECTURE)
-  set(CMAKE_LIBRARY_ARCHITECTURE "")
-endif()
-
-set(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX "")
-if(CMAKE_CXX_CL_SHOWINCLUDES_PREFIX)
-  set(CMAKE_CL_SHOWINCLUDES_PREFIX "${CMAKE_CXX_CL_SHOWINCLUDES_PREFIX}")
-endif()
-
-
-
-
-
-set(CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES "/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include")
-set(CMAKE_CXX_IMPLICIT_LINK_LIBRARIES "stdc++;m;gcc_s;gcc;c;gcc_s;gcc")
-set(CMAKE_CXX_IMPLICIT_LINK_DIRECTORIES "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib")
-set(CMAKE_CXX_IMPLICIT_LINK_FRAMEWORK_DIRECTORIES "")
-set(CMAKE_CXX_COMPILER_CLANG_RESOURCE_DIR "")
-
-set(CMAKE_CXX_COMPILER_IMPORT_STD "")
-### Imported target for C++23 standard library
-set(CMAKE_CXX23_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-### Imported target for C++26 standard library
-set(CMAKE_CXX26_COMPILER_IMPORT_STD_NOT_FOUND_MESSAGE "Toolchain does not support discovering `import std` support")
-
-
-
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_C.bin
deleted file mode 100755
index 6f4e7c0e50420bf30feec79c4ad403f23f067405..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15448
zcmeHOU2Ggz6~4Q68mGkBO&SNc3C*aWsFCo*b{)$NO1t)Y?ODk`A>9a2lupOqu{~nF
zYj($A7ic2_D61&Q2nl$gQY55Gya7T~eQ7rs_2;Rn5K@JBFomMDN=XnD8Hl``GjqQ6
zc(N`PAYMAhnmKd6bH01;ocX&ubNqB>Y$P6wDM*WYM6snMeIzB0&mNZzQYkf{+G%}A
z9aMLb-Rfb!Kjka(`tnA6t8Np#g*5Xzd83Iw<ipg5FBl<f=4~hIJA4nclKo(w=Moz@
z^fS@{H1I}$n)Ddbt-^y2@;En1-RC7A*{YS~rA;(=Y%)(1o+do#E7Bh{^2s^jWkB*7
z)+zF_q`b9KVcwGP!g^TZp}7y1$KG=D|4DzRgtwx3&8V=(@rFi!pC%sX<%0?i^J(dC
zyW?<6@(C@bI#zI|`umO*@?8a|xVY4{G|=DG-=|kfdapMG9#=Old`^u{oKf-fs>T@j
zF%{cl$Hk@)PdIizEu41d|Ng13Tp4}k>1XGU{PsJO?{vn8Uwg62F}xq#CdaTa#tVdf
zSb%*H&76Hr0@H+PO>lD?ytoa158)3qX-AnRWp>)ExK`OU=Pjp5$n=tB&NxM@;5=z7
zc5|Nl)#zAuC~fxYz54OS_CtNj%;v_;yj`|uor-IhbK~hksc7e{se(;y&CZvK(z@w~
zHVssC0n#y|KmWv!k<H`9d9!$*vx|?;Ck6Z2x4%oLU!3lIzTkSsb(Gxe<DGK70<TGf
zZ7JUm9CqzdALnzMj|t?J0M7RW$h812m#pV{BY+3bkF@|Uw?;G-=_mtH2BHi^8Hh3v
zWgyBxlz|Un2L6(`{~yMM8*Rp=9aoPjWqhON#_QLN3%_hz^|HbKo_Dj=*B>{kZyFc=
zaO+eq(^Knt)wq1}Hxy9s_%gBnI-@5Jf8C2G{CRHY@{XUfdU)OKpr#*}rgzoX5{J)o
z;HqefuX^#vzsBn5hEcs`T>aCd#?|!}BleQ<`i8ro8t9S++UjdFiNnL2d>-HVlNoZW
z#fQ!q7f#;In@065x81mO@(3CAj&=GieSNxKufMe85CO4stDECpo!Q(@98M{2@9kNN
zJwt6&zk0){F0Q?txy?hql(}Ji-?-fI_8z4YKW|MYUZ}+~w*}qLyL^*9&$Y%A&xJkj
zHS=`TLoMAtx7s)!jU&KaM-pWq%0QHXC<9Rjq6|bCh%yjmAj&|LfhYq}2L8JY@OQ8G
zlkCLE<cSJ>mn+Sf`31LpwtL`QFn%ICIWl#^T{i7<$<CiGXNSzuiA;8QVo-T;9)D`t
zwarqQzS*4}%jR-p88b66oE@B?2+wa#IcKR3feEpLEuZ3VzdWjyoAo+>Z>!#_*H4jV
z;cuoau_sTf*itffaQDu(75Z?-IP*>s=LiQ3@ASUBG1f;*54G_n#s~K#zZp-r-xV(t
zlYvO03`7}-G7x1T%0QHXC<9Rjq6|bCh%)fu%mC^bQMZViM6Qiw+3l-Fp=7(*D^mY>
zuh^)MJSaAPYTYL`>LmI184LXHZPZI_*QB@+HH!;U)W~&`ENkMw+c(uk(H{}rDY`>6
z)K1wLkcQE3O>ipu^aT8W*8TAi=!I^G-6nkcQtXWvd7_`0p1m&P{kzz~T21NV|Ef?w
zzFnuNM;%S4PiPNPweeA{r;jRcd$iu}-oEaEZYsfT?s~YVd%H#n=e)G4Ki9({d|YB`
zk4kC2=Y9#`witgxa8YVP@bd!Dm-B`+YyUIkjj4N7c)y?UScyj6IU1>W@g3^A)XM^|
z(nhm7>1PSo5ERgFdiVjQQUQ=Qe?iM$+AmG>ah#XGA~UHDsAS5=vF756eergM>k9Z9
zZE$?J{dWo1XbH=00`|raC>&q-cg6hifF!4@>Lfg=KB_uXi1hUzN$sPnU-RCoDCNCl
zA?#xkA0Gcv!a4q4xi5I{UMOBCoW~Q6KS8)g{;=c-e;^E!T_Sv6oUV2mPa`BfZhhWP
zr%Uq-PQfk@4rTRe<rHU1=H^Q%bIO@D?PA`sig&mQj_VfeEna#%rOe^aO$?4_(^Ozi
z*M^xf%#qWB;~CQ!KCR5rvB{yqF>`Wc<grZ7%nc6F3$8os+*2rL|2HM<-e3c7+>~kO
zE!R?9Ax{G_+3*Y8@2GY+^Ocf0XBG2Y37?&$sJv4&7b|w28Y$AsoT^lWE2Z~TJ<l)W
z%=fF6-&&yG*bgqtH)%{R9o5S6ylYL7cFVq=!<JK|8vO;O7fY_K&lVT;g>q@ZF1yPC
zXll`+f3$G&0?|S1a;;hAh0j@)Ii=^9i`0d$-LmibqFt^yrQ#ODBwyJsSWHm5H#pt3
zmt3WL+0)A<FPFMKXU>$ZdE1=J69bmdFs*XgqTw+E+ti#j?@Uu)C2EUS`a*#={KhD$
zN}n#x&)Y@H#s5b5xk;yZ<LzvxJV2oF+(d628<dZe!Oyz5fCIvZP6-Z$=OFBU+6eNO
zgb)1*1d7J}18_FP|AFwKH3W(d^ZEY$H+ptr{Fo0wWB)N92#?<)KF<Zf$9w^LMf&A^
z<lKRe=e|Q24;g&SKcFv?FDT*se}SAlHvk{=0cgylFn+{AKSg|=Yrw{Q1Dc<cEaCC{
zs8W|{gL4W#<~z_e2}J+l{r?{Md7t2K+-K!}i+P<iv*mx17<-16ARo^S=!H<i!ng4s
zhWL06LSx>^eX)ekpC1v%U10x}Mh1)Kt<|@D)mRJMuzx~ZLH>#aK;!%aA>99qA^wkr
z51j*1H1ZGlRodV=j$Aeh^J)AaTR0vz^skAV2=FoA?$ik+L7Z=G+Q5HD4nFqiAM+^u
zU*Z)`4hf%sEa2fdzC##?fRF!ksvYBKr5^NEV+}s^P4Wc!n3r7_KCV+V03P&uh_6x-
zDHjgL8Ro;@pbc&d<Hvj@DSY&Ucu5CL)j|Mc65hbU=lg3=zz^!ixf=*Hq``~g<lj@f
mXu)`p7sfF509{?{^{qv8B+igYbJgbj41Y``*&QN;O!Y4&j*!#<

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin b/cmake-build-debug/CMakeFiles/3.30.5/CMakeDetermineCompilerABI_CXX.bin
deleted file mode 100755
index 66c99e8612cf056b64d38a16057ec51886004a16..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15464
zcmeHOU2Ggz6~4Q68VBO6Q{pzQLo+I<Y7{*Fsbe{*OxHha&r1FYsUrd*OxL?(d&GKo
znH?9q64b&4VTDvKLQo0%fOzUt0U-(xz(z(bc}pIUBE*BKsBo)5jA$V(k(YC3&bJwl
z*5yy)p_*&WeD{3koO|z_JL9=KbLQ#P*hoAUQz#AU<BBD%#b=VDm^&dAf~4wG&9pzF
z+SFYnH+r0}Px?Swzg&;+#3tbz2-)v2SL)yqpQb+if)O&Z-)=?Y0Z{=eIS%&Q!wQkZ
z_=0o*gud3F#?DkUZ(qYk@dF0^cqkj~zWql3PVAJp^a;X`MfTegzb)|tUX}iUh$qK{
zw?2ty7?Y&qlJxdUh5Z)AFO0)t59B_$JpQ_y`)~R?Eq-g7*Nh4y<{OCqK0$smwZ7xO
z*khW{NPoM{gC_9@N_bUA-k$F5>B#5W^LAljv3;?xx4pMVFBkQ0uV)@tCvALAjZU0Z
z@nuzE4*oF}+abqACKIo)?IGGY?Cf9s-8*f^zj@7Q{@%hffB*UA+=~NNoNf3xxJ|a<
z!W?fXtiuNG-@$Wa^k5ys5#sKy!}B<_Iz0DXkN?;%yfV$%`C`E=yBWtdO=YI1#?74N
zShIH7wVbK(p?tAmO=YI@manU?F==|T(#U+qE>N@C#f&*)7czPKDNB*M?B=q^kMoT6
zvN&I>&1T7yr7q^PK0i8^9vm{e^+$RXs@=NxKQB&mM6*eMTw*G&o+ZTj_2cKhMW<zh
zdS1AN`|W*-Y`)LNRB+wndTTl8^P6&AgRe+~O-Wx59&+U|pXY19ABivjI>5`R>?y7W
zc)7Ga{(689o<|!2-upl4Hy`bz2t*NxA`nF&ia->BC<0Lg-e(c`YvO@-jg=cs#>G8X
zI+QZLQgP$etH#Q&n%2D|WqsG5(yP}#YplLzto&i?^i-;=(sjkS)c;#DsJ5<<*IP4s
z;^;G;J@G%|b}sGt5yQz_ZYwoCBTetCZX}K_v*EfR*{^!`C%(*ZY};7fGA{r5G2`;B
z1|#;0ac$c@L=Bvf2AZlHGl`?acl>#L%l#=*tA$6-8Y}&8>QpsWUw500i~SD~Uv0fk
z)MmC?t-iA72obRh>vzVxK69s@IGR-4-W#)IdzRW*{o)N{bz$Sx)NLN}#ncVsdE-*+
z8wZq1{G_oZ@rz0<bz9g&e8@Lh^KxT6@p4%6c0EmNHPq7W3+uJ{sLcR(9hE2oQ3Rq0
zL=lK05Je!0Koo%}0#O8_2t*NxBJjUOfZu1mS4mHdOr9#!E4AW`nJc-@`OdxzLHmjH
z<jC|XcgeJzqLn-EqzBE>iBx)cVnBIzp8xccYnerdUh|zFOHWOWrOedCaC%^ZEIfT?
z+CEQt2<#ARYj~93{qm^RZdR*(gsWTC>S;nQ{LYk1?5Q&<w%8JD+rPJIjb4Z`&wi)L
z=OH#2-s`<lW3Gp`E^6Zo%nuxB`D%Qq`L4J_o=ij~ia->BC<0Lgq6kD0h$0Y0Ac{Z~
zfhYp+j|d>&5c!439h{ZJgZyMjUJl96io9PC36RYquSs6xeIg_8u}x(B)Vg0}<UjK7
zGcM4-y<IJ`T#=+j<RX?NS&{P}xon931HPzU68xaxVZl~Gz+S05Aq}J7itv=Y=@t0@
zqw0@`NY8Xz<WBLYH^ts~5l8x&>B*Yt-w`>OgDGA7Ujg~!yLE~@)6t=!Q`*CnZG24Y
z>e0LPF0H$>yQj0S^Mu+(b+W5-w?>KQxHPK2RKq5Gp2XAvrD?tf^VA`HQuqgawVD+E
z3E>5lBmA-u^hUi_>h=4yr%lxI&SCrws>IZXR5(uG@%UD?DfzLm{~=Xc)IF*t3C73c
zF{L!(Rfzv7sSncelF}>4y?vFW2YqVC{xy>BR{Pa`a$R}PE{OXhZ3pA`D9jg}-eUWB
zv%+-<{$1uF1h9j~$?a>BckDegA^p9~$LT5(9xfjyp8E|S?=j*z4&meN_4s?$;Urq{
z@loN!?Tiwy?KJhI>@K{s3$KR8GoQ1D&Yc@7&X?@G<qQm_^=zr6%ukPX_1cA*q8WIa
z#ca3F-g!o4PTRAlRmj;HN-HP*NzW^w&)cq>w*n@8o&`O{qBL~6bj*}tj+_}7PnpK>
z8D$QCYGPnKJ*3RhvB|-KF>`Wc<nh#$IW;gy55kmb<uY!Da@{8>ojqq4%!RU*3#GFs
zgDL5f?w%_b&ACh=$9eLU_Rd|0a^h=Vl+$jKg-a%sU(e6pIPu=(e*F}B8bpEnoGzC^
zyjNO&oeciES^7#ZFU`A|X+qcWaSk=RK-vB!r5B2>rOy@?^paC7S&q9Dpr#jW`u@Vs
z2}Lv6?q+6{XFiuH&nZ2(RG=<=bRA#wq~(<DVqu41lFqU68Fo;*7Yp6B7G0%#q0^nB
zHwn5mXU;g8dCQ#3kq0E-!^}8NhK9!;s8e&9c{@ve6{#)S>7_hX{KhDnO3xPO=dFTU
z=gj`kD87%<DPMb9dsuELK-@>sD%%FjM@Zm%UtGvO@dqY_2jIR4xtA(I|3&c!eiVj+
z`2Pkv9rFLK_yaW<3WohZN&MgFUW)N!eE`JqV|@@Fe}?>dZ2*6)AAoDpFCQbv4*pmN
z*u?RW;g9tQ@Fmg(OE~_YCnc{H;E(kI5bG+8A9lbmkw33JAY=VeL+Ly`evIi7RXC>b
z$NC3Y5kvGJKK^f$o{tIo+WkT96Ika-GdsRfV(tang8sPg0862Og>FCI_cTF&+~<H;
zhwj$@i_$-iUuj|~i1n?oH8o_u-*f-)U(<XI5a*xI?)*lJxnI&2^#6gztWv-!U##sB
ze-Kxw!fPA3Y--;X;k&l5J!If-$Tt!2$NGCyzB7a!nRo><@b|>>+@pW2lklA)zDMNq
zj|==Tk8cvk#}9ve&s5<BAC-rFsO{koyh)m%Kh|TL;*aYT4Zsh0E99?|V%g~<#wl!V
z{E)Y)!fj#vSiiK0Kl*_^k2P2th+t04YbyBj|JPuFe-Lr*1?>!J@N1&v-&g#b2;)Iq
j_7R7%2mP;h`_k9ZktjnVtzGN;e}-SKQQ04I2#M;S&VRIx

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake b/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
deleted file mode 100644
index b0b76c86f9e..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CMakeSystem.cmake
+++ /dev/null
@@ -1,15 +0,0 @@
-set(CMAKE_HOST_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_NAME "Linux")
-set(CMAKE_HOST_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_HOST_SYSTEM_PROCESSOR "x86_64")
-
-
-
-set(CMAKE_SYSTEM "Linux-6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_NAME "Linux")
-set(CMAKE_SYSTEM_VERSION "6.10.2-273-tkg-eevdf")
-set(CMAKE_SYSTEM_PROCESSOR "x86_64")
-
-set(CMAKE_CROSSCOMPILING "FALSE")
-
-set(CMAKE_SYSTEM_LOADED 1)
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
deleted file mode 100644
index 8d8bb038bb3..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/CMakeCCompilerId.c
+++ /dev/null
@@ -1,904 +0,0 @@
-#ifdef __cplusplus
-# error "A C++ compiler has been selected for C."
-#endif
-
-#if defined(__18CXX)
-# define ID_VOID_MAIN
-#endif
-#if defined(__CLASSIC_C__)
-/* cv-qualifiers did not exist in K&R C */
-# define const
-# define volatile
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_C)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_C >= 0x5100
-   /* __SUNPRO_C = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_C>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_C>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_C    & 0xF)
-# endif
-
-#elif defined(__HP_cc)
-# define COMPILER_ID "HP"
-  /* __HP_cc = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_cc/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_cc/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_cc     % 100)
-
-#elif defined(__DECC)
-# define COMPILER_ID "Compaq"
-  /* __DECC_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECC_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECC_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECC_VER         % 10000)
-
-#elif defined(__IBMC__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__IBMC__) && !defined(__COMPILER_VER__) && __IBMC__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMC__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMC__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMC__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMC__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__TINYC__)
-# define COMPILER_ID "TinyCC"
-
-#elif defined(__BCC__)
-# define COMPILER_ID "Bruce"
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__)
-# define COMPILER_ID "GNU"
-# define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-#elif defined(__SDCC_VERSION_MAJOR) || defined(SDCC)
-# define COMPILER_ID "SDCC"
-# if defined(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MAJOR DEC(__SDCC_VERSION_MAJOR)
-#  define COMPILER_VERSION_MINOR DEC(__SDCC_VERSION_MINOR)
-#  define COMPILER_VERSION_PATCH DEC(__SDCC_VERSION_PATCH)
-# else
-  /* SDCC = VRP */
-#  define COMPILER_VERSION_MAJOR DEC(SDCC/100)
-#  define COMPILER_VERSION_MINOR DEC(SDCC/10 % 10)
-#  define COMPILER_VERSION_PATCH DEC(SDCC    % 10)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define C_STD_99 199901L
-#define C_STD_11 201112L
-#define C_STD_17 201710L
-#define C_STD_23 202311L
-
-#ifdef __STDC_VERSION__
-#  define C_STD __STDC_VERSION__
-#endif
-
-#if !defined(__STDC__) && !defined(__clang__)
-# if defined(_MSC_VER) || defined(__ibmxl__) || defined(__IBMC__)
-#  define C_VERSION "90"
-# else
-#  define C_VERSION
-# endif
-#elif C_STD > C_STD_17
-# define C_VERSION "23"
-#elif C_STD > C_STD_11
-# define C_VERSION "17"
-#elif C_STD > C_STD_99
-# define C_VERSION "11"
-#elif C_STD >= C_STD_99
-# define C_VERSION "99"
-#else
-# define C_VERSION "90"
-#endif
-const char* info_language_standard_default =
-  "INFO" ":" "standard_default[" C_VERSION "]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef ID_VOID_MAIN
-void main() {}
-#else
-# if defined(__CLASSIC_C__)
-int main(argc, argv) int argc; char *argv[];
-# else
-int main(int argc, char* argv[])
-# endif
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
-#endif
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
deleted file mode 100755
index 37746a787a5774e617e8abfcaacf5381d6be0900..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15560
zcmeHOYit}>6~4R9!zpoh<JPX56f!g@awR-oJC513q+LJO8B2bY)Dc1^9gV$Xd&PR!
z?2f@HY8w$KF=<eF2#N$K5<-GXAXS2jAE-D=RT>FUf`n962)RHZpg@BP$c4zuIdjjq
z8Bf<O>YoZ}uH`xReD{3k-Z^(3cW2H#njIO6$6^YlLEWoZGm;v~NW%*Ur9vX3(yEEJ
zcc?vT8|hnoOt)vWpjKU8jBk{Uf;W(4UK>~H$U8JledvM_vSi+7Wq}7o1yad=FmEe2
zh#r=|kPaZxUhB_bG8Mz$*5n6;2N~q?P?Dy$Pu{yxwo6=6BEe&od4})|;X$60{vZ)g
zjtT##C7xlKp*AiVf2&lOw<Nr<929#<?t{w%uXwq))8GBV`?=w}QDKSshD3iKBA!gG
zCcecM(|lC=+iV`LNjxD%Rh@<WRBumbA=gpJ7Z;a0meRc)y**~7WOn;K^SDy<&&Sk}
zv12NJQmrrseoVzS=yB1>#4l`nEB$lWnSamYzklRU7rj4r9@_Wm%fET=Q^zVlSYsRB
z5BAA6To~hj6mG*mu>VCer@4;d0AWTQ+};E)Zi3%J_?>n9DBGsUPTLjFDSP(3lP?l7
zz2w+4`Jz+EKjbQI<~aANBO}B819rFBZ62)E5A-N|cw*Gfxn*}YU-8`X#OOewRCFht
zse((sX6H*q@osC=x`s;8jQD^0z>ks6<Hd2axI4dtXXpKb{qT!lrNb{yS3X^EKI1$}
z?$UUhoUg!F#9?Dbw*!Zs4B>{M?b<?kS#TqSe@^iB5dLMsQz88Og0I}C{KDrH9}6fi
z1n@XOl9vLwTq^w57Xx_kxLgh3{&hFtE2>5jh$0Y0Ac{Z~fhYn|1fmGMa}jtg@t%KM
zr>-_yXSSa2RLc77iWje5vQ9nMc)=eOw|D(@c=_^!*7EPHQ-8R2|3tQHrR$<~_V7z&
zP;L1XvHme*CiZ^Dw<r8%_H%aYODqnpc`fAnL2<pKx|-N~k_|72B>Sg*`-4xhxNF^7
zzGj{O+kMvgwFWEpymfiqyOkVth=a!J>P%wq;0->H@8scmYF3K}j#;M;-^5jG`4z9p
zI&*kGDb<!W`YnBBx>~J1zjcs+*zpTD#(QDrMm@1NquAe{XUX;$`B;AVs<phh`m^kH
z9<p_&<+tSNO!lhvq!qiAct$0jU5RC{6aLFh@Mr7c+QHeD^EWG%cxFqo=H<zH*5v(k
zJ^W1e`f-|~+WggKjE5SPC<0Lgq6kD0h$0Y0Ac{Z~fhYn|1fmE;5r`tNF#`PF>&?pW
z*wFah)1~=^e8DYG(p$*m8?86A+n;dDm3*l<net0lkEtuEZdAICE1$7YaJ-pPd46()
z->wSil&9w=rB3e$i#ey9qZfTM&SJrv?D~MTxJ#Z}<X$SZw(&84RIxn`_q5UQc#kGt
ztyX(Tj$W%)M@aI!RxYuJj;h#FGPY;u_QogZ#TVoJuDOlu_p`y^cK?kXW6Xb@@b56*
zcXRTw_(0RP_&H)S5S1tbQ3Rq0L=lK05Je!0Koo%}0#O8_2>gFX0C|kaTSRW)ow8dy
zv3ru&*d+Rj<UignI`Sj;h>o93yG2KyB=UUG{?GMliA`1{$q>1N3zA&O`HEatrTr$Y
zs?#FhC6a#!a%s_`w%snZv^Yk;Y1vUq`t%F<|EcQn5a^q(i{2=FdQ<F=7jdGWo4)QR
z?-J>C*lV}%*cSQYn+*W@sD_~}kZ+3oQsk2&fAq+}z}-eWJrB6cpr85OW|z^O>h4LU
zQ<SP(zv)m{YO~G>=lE?=f3MavsfY9L_L#awh4<^-zJo+9uN?lk?-(5oS0pbL_z+c^
zp#<bK)s29T>KA;xRjCXREgvP3RIMr<!XG2NIo_mjerRi@9vAztpRW^cz$hTUOZ8px
zR)u*&(~lTelu2M{1Ub0R`FN`e=Mn!(@Ni!6YlJ7&Z7P$YN}zm+>dk6r?R${@(zZr&
z7wvB{qXC>p+h`)$PdE<EgtMR9<vQU%Qz7bYg!6ud?e{TG{=<3A{e&C3%MII)5{_$B
zu;G)0H^=F!AlECjJxn;qEn{e;TN*y^<E_fbXaM`A21cEaxdQ|8By2cmPAhxxBV&D|
z!vmCcPA7t$wd|pzeWO|18a%4(BO~MeeIxex(9i?f345Zie<Vx!=;7q|407DxDzDwm
zIi909OFmCtSkX!DZ^(GJbCr@kM-R_98-944taACHy;yN`Dqox_*?97%wSrTeU36w$
z`;AZ4l<gLUgXe$L*;J(>9ZT*$rQh4xu|eAoISfC*dy`!JjUNEiLc(ePHtnycJ<GF2
zt?;8lrOe8SdC!?5>6NvdLoHvVPXiW|SuA<3Ia^#b7s{mtx9pt=KvRo(`o1Hd6R59$
zxWjX1m2W=hROXbKJ5i)AwDiil1>^9|M6s!@>=qm*DAOOa=}}0P=}(whF8R}Ex^wnS
z*_n6kxg0T|X@>2T%MJ~X8K{#xXFfko9hb-#ZOnxNRkSmj3T4vN%)3QTj^4K~_&!aC
ze(h;+o7`U^ai2yHY#S{5Na1^HT)?#OAv1zQ)XpmbdPxTPOTveIABZAxodY}^;(tT<
zkOmAzhWQ^R{9kmh#`v-RfW-c96MlI74&l7^03YiU$R~uy`^d2aAM1=fVLW8;vEG3^
zO>Myvj{nE0k=G*NWBmb%bsNSHJIF_f&ubg#Sl>Y6-W?u4#&nh{98>VIzN$$XF!~Sg
z|JR7iCTOo+ujRUpbtIYiB|LxMBs9o3ga`SpP{5>FyeakV5PwDPQ;=Baf)MWid&0;5
zD?=<rUKABVV5sV8s__uP-|V|M5W@ZcG{nDRXiLZm5Je*XfO&khitvv?#;|_JcXMHT
z=#alAP9ng^`o4{F7rDSrYd3V@FH-~0y_~kSbsfHgJSX$V#~&B)FpqyBj7`AD_f0FE
zY^_wg7PT$-kgrlpkdJlZ72)GNg#+*)c|8>5tBhEtv`mW%0Uq>qsxXG}V?C4>e%M~Z
z0lI1+fH5(z;o$T2HCVt8N*sGZy9IIhV`<z?jXX~n58|?eFpNFOZ$F^5ub?Ao45_ph
RtIz)lzl5W*Geiif>c5;{)EEE&

diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
deleted file mode 100644
index da6c824af3a..00000000000
--- a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/CMakeCXXCompilerId.cpp
+++ /dev/null
@@ -1,919 +0,0 @@
-/* This source file must have a .cpp extension so that all C++ compilers
-   recognize the extension without flags.  Borland does not know .cxx for
-   example.  */
-#ifndef __cplusplus
-# error "A C compiler has been selected for C++."
-#endif
-
-#if !defined(__has_include)
-/* If the compiler does not have __has_include, pretend the answer is
-   always no.  */
-#  define __has_include(x) 0
-#endif
-
-
-/* Version number components: V=Version, R=Revision, P=Patch
-   Version date components:   YYYY=Year, MM=Month,   DD=Day  */
-
-#if defined(__INTEL_COMPILER) || defined(__ICC)
-# define COMPILER_ID "Intel"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_ID "GNU"
-# endif
-  /* __INTEL_COMPILER = VRP prior to 2021, and then VVVV for 2021 and later,
-     except that a few beta releases use the old format with V=2021.  */
-# if __INTEL_COMPILER < 2021 || __INTEL_COMPILER == 202110 || __INTEL_COMPILER == 202111
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER/100)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER/10 % 10)
-#  if defined(__INTEL_COMPILER_UPDATE)
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER_UPDATE)
-#  else
-#   define COMPILER_VERSION_PATCH DEC(__INTEL_COMPILER   % 10)
-#  endif
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__INTEL_COMPILER)
-#  define COMPILER_VERSION_MINOR DEC(__INTEL_COMPILER_UPDATE)
-   /* The third version component from --version is an update index,
-      but no macro is provided for it.  */
-#  define COMPILER_VERSION_PATCH DEC(0)
-# endif
-# if defined(__INTEL_COMPILER_BUILD_DATE)
-   /* __INTEL_COMPILER_BUILD_DATE = YYYYMMDD */
-#  define COMPILER_VERSION_TWEAK DEC(__INTEL_COMPILER_BUILD_DATE)
-# endif
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# if defined(__GNUC__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-# elif defined(__GNUG__)
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif (defined(__clang__) && defined(__INTEL_CLANG_COMPILER)) || defined(__INTEL_LLVM_COMPILER)
-# define COMPILER_ID "IntelLLVM"
-#if defined(_MSC_VER)
-# define SIMULATE_ID "MSVC"
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_ID "GNU"
-#endif
-/* __INTEL_LLVM_COMPILER = VVVVRP prior to 2021.2.0, VVVVRRPP for 2021.2.0 and
- * later.  Look for 6 digit vs. 8 digit version number to decide encoding.
- * VVVV is no smaller than the current year when a version is released.
- */
-#if __INTEL_LLVM_COMPILER < 1000000L
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/100)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER    % 10)
-#else
-# define COMPILER_VERSION_MAJOR DEC(__INTEL_LLVM_COMPILER/10000)
-# define COMPILER_VERSION_MINOR DEC(__INTEL_LLVM_COMPILER/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__INTEL_LLVM_COMPILER     % 100)
-#endif
-#if defined(_MSC_VER)
-  /* _MSC_VER = VVRR */
-# define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-#endif
-#if defined(__GNUC__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#elif defined(__GNUG__)
-# define SIMULATE_VERSION_MAJOR DEC(__GNUG__)
-#endif
-#if defined(__GNUC_MINOR__)
-# define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#endif
-#if defined(__GNUC_PATCHLEVEL__)
-# define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#endif
-
-#elif defined(__PATHCC__)
-# define COMPILER_ID "PathScale"
-# define COMPILER_VERSION_MAJOR DEC(__PATHCC__)
-# define COMPILER_VERSION_MINOR DEC(__PATHCC_MINOR__)
-# if defined(__PATHCC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PATHCC_PATCHLEVEL__)
-# endif
-
-#elif defined(__BORLANDC__) && defined(__CODEGEARC_VERSION__)
-# define COMPILER_ID "Embarcadero"
-# define COMPILER_VERSION_MAJOR HEX(__CODEGEARC_VERSION__>>24 & 0x00FF)
-# define COMPILER_VERSION_MINOR HEX(__CODEGEARC_VERSION__>>16 & 0x00FF)
-# define COMPILER_VERSION_PATCH DEC(__CODEGEARC_VERSION__     & 0xFFFF)
-
-#elif defined(__BORLANDC__)
-# define COMPILER_ID "Borland"
-  /* __BORLANDC__ = 0xVRR */
-# define COMPILER_VERSION_MAJOR HEX(__BORLANDC__>>8)
-# define COMPILER_VERSION_MINOR HEX(__BORLANDC__ & 0xFF)
-
-#elif defined(__WATCOMC__) && __WATCOMC__ < 1200
-# define COMPILER_ID "Watcom"
-   /* __WATCOMC__ = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(__WATCOMC__ / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__WATCOMC__)
-# define COMPILER_ID "OpenWatcom"
-   /* __WATCOMC__ = VVRP + 1100 */
-# define COMPILER_VERSION_MAJOR DEC((__WATCOMC__ - 1100) / 100)
-# define COMPILER_VERSION_MINOR DEC((__WATCOMC__ / 10) % 10)
-# if (__WATCOMC__ % 10) > 0
-#  define COMPILER_VERSION_PATCH DEC(__WATCOMC__ % 10)
-# endif
-
-#elif defined(__SUNPRO_CC)
-# define COMPILER_ID "SunPro"
-# if __SUNPRO_CC >= 0x5100
-   /* __SUNPRO_CC = 0xVRRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>12)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xFF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# else
-   /* __SUNPRO_CC = 0xVRP */
-#  define COMPILER_VERSION_MAJOR HEX(__SUNPRO_CC>>8)
-#  define COMPILER_VERSION_MINOR HEX(__SUNPRO_CC>>4 & 0xF)
-#  define COMPILER_VERSION_PATCH HEX(__SUNPRO_CC    & 0xF)
-# endif
-
-#elif defined(__HP_aCC)
-# define COMPILER_ID "HP"
-  /* __HP_aCC = VVRRPP */
-# define COMPILER_VERSION_MAJOR DEC(__HP_aCC/10000)
-# define COMPILER_VERSION_MINOR DEC(__HP_aCC/100 % 100)
-# define COMPILER_VERSION_PATCH DEC(__HP_aCC     % 100)
-
-#elif defined(__DECCXX)
-# define COMPILER_ID "Compaq"
-  /* __DECCXX_VER = VVRRTPPPP */
-# define COMPILER_VERSION_MAJOR DEC(__DECCXX_VER/10000000)
-# define COMPILER_VERSION_MINOR DEC(__DECCXX_VER/100000  % 100)
-# define COMPILER_VERSION_PATCH DEC(__DECCXX_VER         % 10000)
-
-#elif defined(__IBMCPP__) && defined(__COMPILER_VER__)
-# define COMPILER_ID "zOS"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__open_xl__) && defined(__clang__)
-# define COMPILER_ID "IBMClang"
-# define COMPILER_VERSION_MAJOR DEC(__open_xl_version__)
-# define COMPILER_VERSION_MINOR DEC(__open_xl_release__)
-# define COMPILER_VERSION_PATCH DEC(__open_xl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__open_xl_ptf_fix_level__)
-
-
-#elif defined(__ibmxl__) && defined(__clang__)
-# define COMPILER_ID "XLClang"
-# define COMPILER_VERSION_MAJOR DEC(__ibmxl_version__)
-# define COMPILER_VERSION_MINOR DEC(__ibmxl_release__)
-# define COMPILER_VERSION_PATCH DEC(__ibmxl_modification__)
-# define COMPILER_VERSION_TWEAK DEC(__ibmxl_ptf_fix_level__)
-
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ >= 800
-# define COMPILER_ID "XL"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__IBMCPP__) && !defined(__COMPILER_VER__) && __IBMCPP__ < 800
-# define COMPILER_ID "VisualAge"
-  /* __IBMCPP__ = VRP */
-# define COMPILER_VERSION_MAJOR DEC(__IBMCPP__/100)
-# define COMPILER_VERSION_MINOR DEC(__IBMCPP__/10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__IBMCPP__    % 10)
-
-#elif defined(__NVCOMPILER)
-# define COMPILER_ID "NVHPC"
-# define COMPILER_VERSION_MAJOR DEC(__NVCOMPILER_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__NVCOMPILER_MINOR__)
-# if defined(__NVCOMPILER_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__NVCOMPILER_PATCHLEVEL__)
-# endif
-
-#elif defined(__PGI)
-# define COMPILER_ID "PGI"
-# define COMPILER_VERSION_MAJOR DEC(__PGIC__)
-# define COMPILER_VERSION_MINOR DEC(__PGIC_MINOR__)
-# if defined(__PGIC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__PGIC_PATCHLEVEL__)
-# endif
-
-#elif defined(__clang__) && defined(__cray__)
-# define COMPILER_ID "CrayClang"
-# define COMPILER_VERSION_MAJOR DEC(__cray_major__)
-# define COMPILER_VERSION_MINOR DEC(__cray_minor__)
-# define COMPILER_VERSION_PATCH DEC(__cray_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(_CRAYC)
-# define COMPILER_ID "Cray"
-# define COMPILER_VERSION_MAJOR DEC(_RELEASE_MAJOR)
-# define COMPILER_VERSION_MINOR DEC(_RELEASE_MINOR)
-
-#elif defined(__TI_COMPILER_VERSION__)
-# define COMPILER_ID "TI"
-  /* __TI_COMPILER_VERSION__ = VVVRRRPPP */
-# define COMPILER_VERSION_MAJOR DEC(__TI_COMPILER_VERSION__/1000000)
-# define COMPILER_VERSION_MINOR DEC(__TI_COMPILER_VERSION__/1000   % 1000)
-# define COMPILER_VERSION_PATCH DEC(__TI_COMPILER_VERSION__        % 1000)
-
-#elif defined(__CLANG_FUJITSU)
-# define COMPILER_ID "FujitsuClang"
-# define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-# define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-# define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# define COMPILER_VERSION_INTERNAL_STR __clang_version__
-
-
-#elif defined(__FUJITSU)
-# define COMPILER_ID "Fujitsu"
-# if defined(__FCC_version__)
-#   define COMPILER_VERSION __FCC_version__
-# elif defined(__FCC_major__)
-#   define COMPILER_VERSION_MAJOR DEC(__FCC_major__)
-#   define COMPILER_VERSION_MINOR DEC(__FCC_minor__)
-#   define COMPILER_VERSION_PATCH DEC(__FCC_patchlevel__)
-# endif
-# if defined(__fcc_version)
-#   define COMPILER_VERSION_INTERNAL DEC(__fcc_version)
-# elif defined(__FCC_VERSION)
-#   define COMPILER_VERSION_INTERNAL DEC(__FCC_VERSION)
-# endif
-
-
-#elif defined(__ghs__)
-# define COMPILER_ID "GHS"
-/* __GHS_VERSION_NUMBER = VVVVRP */
-# ifdef __GHS_VERSION_NUMBER
-# define COMPILER_VERSION_MAJOR DEC(__GHS_VERSION_NUMBER / 100)
-# define COMPILER_VERSION_MINOR DEC(__GHS_VERSION_NUMBER / 10 % 10)
-# define COMPILER_VERSION_PATCH DEC(__GHS_VERSION_NUMBER      % 10)
-# endif
-
-#elif defined(__TASKING__)
-# define COMPILER_ID "Tasking"
-  # define COMPILER_VERSION_MAJOR DEC(__VERSION__/1000)
-  # define COMPILER_VERSION_MINOR DEC(__VERSION__ % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__VERSION__)
-
-#elif defined(__ORANGEC__)
-# define COMPILER_ID "OrangeC"
-# define COMPILER_VERSION_MAJOR DEC(__ORANGEC_MAJOR__)
-# define COMPILER_VERSION_MINOR DEC(__ORANGEC_MINOR__)
-# define COMPILER_VERSION_PATCH DEC(__ORANGEC_PATCHLEVEL__)
-
-#elif defined(__SCO_VERSION__)
-# define COMPILER_ID "SCO"
-
-#elif defined(__ARMCC_VERSION) && !defined(__clang__)
-# define COMPILER_ID "ARMCC"
-#if __ARMCC_VERSION >= 1000000
-  /* __ARMCC_VERSION = VRRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION     % 10000)
-#else
-  /* __ARMCC_VERSION = VRPPPP */
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCC_VERSION/100000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCC_VERSION/10000 % 10)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCC_VERSION    % 10000)
-#endif
-
-
-#elif defined(__clang__) && defined(__apple_build_version__)
-# define COMPILER_ID "AppleClang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-# define COMPILER_VERSION_TWEAK DEC(__apple_build_version__)
-
-#elif defined(__clang__) && defined(__ARMCOMPILER_VERSION)
-# define COMPILER_ID "ARMClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ARMCOMPILER_VERSION/1000000)
-  # define COMPILER_VERSION_MINOR DEC(__ARMCOMPILER_VERSION/10000 % 100)
-  # define COMPILER_VERSION_PATCH DEC(__ARMCOMPILER_VERSION/100   % 100)
-# define COMPILER_VERSION_INTERNAL DEC(__ARMCOMPILER_VERSION)
-
-#elif defined(__clang__) && defined(__ti__)
-# define COMPILER_ID "TIClang"
-  # define COMPILER_VERSION_MAJOR DEC(__ti_major__)
-  # define COMPILER_VERSION_MINOR DEC(__ti_minor__)
-  # define COMPILER_VERSION_PATCH DEC(__ti_patchlevel__)
-# define COMPILER_VERSION_INTERNAL DEC(__ti_version__)
-
-#elif defined(__clang__)
-# define COMPILER_ID "Clang"
-# if defined(_MSC_VER)
-#  define SIMULATE_ID "MSVC"
-# endif
-# define COMPILER_VERSION_MAJOR DEC(__clang_major__)
-# define COMPILER_VERSION_MINOR DEC(__clang_minor__)
-# define COMPILER_VERSION_PATCH DEC(__clang_patchlevel__)
-# if defined(_MSC_VER)
-   /* _MSC_VER = VVRR */
-#  define SIMULATE_VERSION_MAJOR DEC(_MSC_VER / 100)
-#  define SIMULATE_VERSION_MINOR DEC(_MSC_VER % 100)
-# endif
-
-#elif defined(__LCC__) && (defined(__GNUC__) || defined(__GNUG__) || defined(__MCST__))
-# define COMPILER_ID "LCC"
-# define COMPILER_VERSION_MAJOR DEC(__LCC__ / 100)
-# define COMPILER_VERSION_MINOR DEC(__LCC__ % 100)
-# if defined(__LCC_MINOR__)
-#  define COMPILER_VERSION_PATCH DEC(__LCC_MINOR__)
-# endif
-# if defined(__GNUC__) && defined(__GNUC_MINOR__)
-#  define SIMULATE_ID "GNU"
-#  define SIMULATE_VERSION_MAJOR DEC(__GNUC__)
-#  define SIMULATE_VERSION_MINOR DEC(__GNUC_MINOR__)
-#  if defined(__GNUC_PATCHLEVEL__)
-#   define SIMULATE_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-#  endif
-# endif
-
-#elif defined(__GNUC__) || defined(__GNUG__)
-# define COMPILER_ID "GNU"
-# if defined(__GNUC__)
-#  define COMPILER_VERSION_MAJOR DEC(__GNUC__)
-# else
-#  define COMPILER_VERSION_MAJOR DEC(__GNUG__)
-# endif
-# if defined(__GNUC_MINOR__)
-#  define COMPILER_VERSION_MINOR DEC(__GNUC_MINOR__)
-# endif
-# if defined(__GNUC_PATCHLEVEL__)
-#  define COMPILER_VERSION_PATCH DEC(__GNUC_PATCHLEVEL__)
-# endif
-
-#elif defined(_MSC_VER)
-# define COMPILER_ID "MSVC"
-  /* _MSC_VER = VVRR */
-# define COMPILER_VERSION_MAJOR DEC(_MSC_VER / 100)
-# define COMPILER_VERSION_MINOR DEC(_MSC_VER % 100)
-# if defined(_MSC_FULL_VER)
-#  if _MSC_VER >= 1400
-    /* _MSC_FULL_VER = VVRRPPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 100000)
-#  else
-    /* _MSC_FULL_VER = VVRRPPPP */
-#   define COMPILER_VERSION_PATCH DEC(_MSC_FULL_VER % 10000)
-#  endif
-# endif
-# if defined(_MSC_BUILD)
-#  define COMPILER_VERSION_TWEAK DEC(_MSC_BUILD)
-# endif
-
-#elif defined(_ADI_COMPILER)
-# define COMPILER_ID "ADSP"
-#if defined(__VERSIONNUM__)
-  /* __VERSIONNUM__ = 0xVVRRPPTT */
-#  define COMPILER_VERSION_MAJOR DEC(__VERSIONNUM__ >> 24 & 0xFF)
-#  define COMPILER_VERSION_MINOR DEC(__VERSIONNUM__ >> 16 & 0xFF)
-#  define COMPILER_VERSION_PATCH DEC(__VERSIONNUM__ >> 8 & 0xFF)
-#  define COMPILER_VERSION_TWEAK DEC(__VERSIONNUM__ & 0xFF)
-#endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# define COMPILER_ID "IAR"
-# if defined(__VER__) && defined(__ICCARM__)
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 1000000)
-#  define COMPILER_VERSION_MINOR DEC(((__VER__) / 1000) % 1000)
-#  define COMPILER_VERSION_PATCH DEC((__VER__) % 1000)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# elif defined(__VER__) && (defined(__ICCAVR__) || defined(__ICCRX__) || defined(__ICCRH850__) || defined(__ICCRL78__) || defined(__ICC430__) || defined(__ICCRISCV__) || defined(__ICCV850__) || defined(__ICC8051__) || defined(__ICCSTM8__))
-#  define COMPILER_VERSION_MAJOR DEC((__VER__) / 100)
-#  define COMPILER_VERSION_MINOR DEC((__VER__) - (((__VER__) / 100)*100))
-#  define COMPILER_VERSION_PATCH DEC(__SUBVERSION__)
-#  define COMPILER_VERSION_INTERNAL DEC(__IAR_SYSTEMS_ICC__)
-# endif
-
-
-/* These compilers are either not known or too old to define an
-  identification macro.  Try to identify the platform and guess that
-  it is the native compiler.  */
-#elif defined(__hpux) || defined(__hpua)
-# define COMPILER_ID "HP"
-
-#else /* unknown compiler */
-# define COMPILER_ID ""
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_compiler = "INFO" ":" "compiler[" COMPILER_ID "]";
-#ifdef SIMULATE_ID
-char const* info_simulate = "INFO" ":" "simulate[" SIMULATE_ID "]";
-#endif
-
-#ifdef __QNXNTO__
-char const* qnxnto = "INFO" ":" "qnxnto[]";
-#endif
-
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-char const *info_cray = "INFO" ":" "compiler_wrapper[CrayPrgEnv]";
-#endif
-
-#define STRINGIFY_HELPER(X) #X
-#define STRINGIFY(X) STRINGIFY_HELPER(X)
-
-/* Identify known platforms by name.  */
-#if defined(__linux) || defined(__linux__) || defined(linux)
-# define PLATFORM_ID "Linux"
-
-#elif defined(__MSYS__)
-# define PLATFORM_ID "MSYS"
-
-#elif defined(__CYGWIN__)
-# define PLATFORM_ID "Cygwin"
-
-#elif defined(__MINGW32__)
-# define PLATFORM_ID "MinGW"
-
-#elif defined(__APPLE__)
-# define PLATFORM_ID "Darwin"
-
-#elif defined(_WIN32) || defined(__WIN32__) || defined(WIN32)
-# define PLATFORM_ID "Windows"
-
-#elif defined(__FreeBSD__) || defined(__FreeBSD)
-# define PLATFORM_ID "FreeBSD"
-
-#elif defined(__NetBSD__) || defined(__NetBSD)
-# define PLATFORM_ID "NetBSD"
-
-#elif defined(__OpenBSD__) || defined(__OPENBSD)
-# define PLATFORM_ID "OpenBSD"
-
-#elif defined(__sun) || defined(sun)
-# define PLATFORM_ID "SunOS"
-
-#elif defined(_AIX) || defined(__AIX) || defined(__AIX__) || defined(__aix) || defined(__aix__)
-# define PLATFORM_ID "AIX"
-
-#elif defined(__hpux) || defined(__hpux__)
-# define PLATFORM_ID "HP-UX"
-
-#elif defined(__HAIKU__)
-# define PLATFORM_ID "Haiku"
-
-#elif defined(__BeOS) || defined(__BEOS__) || defined(_BEOS)
-# define PLATFORM_ID "BeOS"
-
-#elif defined(__QNX__) || defined(__QNXNTO__)
-# define PLATFORM_ID "QNX"
-
-#elif defined(__tru64) || defined(_tru64) || defined(__TRU64__)
-# define PLATFORM_ID "Tru64"
-
-#elif defined(__riscos) || defined(__riscos__)
-# define PLATFORM_ID "RISCos"
-
-#elif defined(__sinix) || defined(__sinix__) || defined(__SINIX__)
-# define PLATFORM_ID "SINIX"
-
-#elif defined(__UNIX_SV__)
-# define PLATFORM_ID "UNIX_SV"
-
-#elif defined(__bsdos__)
-# define PLATFORM_ID "BSDOS"
-
-#elif defined(_MPRAS) || defined(MPRAS)
-# define PLATFORM_ID "MP-RAS"
-
-#elif defined(__osf) || defined(__osf__)
-# define PLATFORM_ID "OSF1"
-
-#elif defined(_SCO_SV) || defined(SCO_SV) || defined(sco_sv)
-# define PLATFORM_ID "SCO_SV"
-
-#elif defined(__ultrix) || defined(__ultrix__) || defined(_ULTRIX)
-# define PLATFORM_ID "ULTRIX"
-
-#elif defined(__XENIX__) || defined(_XENIX) || defined(XENIX)
-# define PLATFORM_ID "Xenix"
-
-#elif defined(__WATCOMC__)
-# if defined(__LINUX__)
-#  define PLATFORM_ID "Linux"
-
-# elif defined(__DOS__)
-#  define PLATFORM_ID "DOS"
-
-# elif defined(__OS2__)
-#  define PLATFORM_ID "OS2"
-
-# elif defined(__WINDOWS__)
-#  define PLATFORM_ID "Windows3x"
-
-# elif defined(__VXWORKS__)
-#  define PLATFORM_ID "VxWorks"
-
-# else /* unknown platform */
-#  define PLATFORM_ID
-# endif
-
-#elif defined(__INTEGRITY)
-# if defined(INT_178B)
-#  define PLATFORM_ID "Integrity178"
-
-# else /* regular Integrity */
-#  define PLATFORM_ID "Integrity"
-# endif
-
-# elif defined(_ADI_COMPILER)
-#  define PLATFORM_ID "ADSP"
-
-#else /* unknown platform */
-# define PLATFORM_ID
-
-#endif
-
-/* For windows compilers MSVC and Intel we can determine
-   the architecture of the compiler being used.  This is because
-   the compilers do not have flags that can change the architecture,
-   but rather depend on which compiler is being used
-*/
-#if defined(_WIN32) && defined(_MSC_VER)
-# if defined(_M_IA64)
-#  define ARCHITECTURE_ID "IA64"
-
-# elif defined(_M_ARM64EC)
-#  define ARCHITECTURE_ID "ARM64EC"
-
-# elif defined(_M_X64) || defined(_M_AMD64)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# elif defined(_M_ARM64)
-#  define ARCHITECTURE_ID "ARM64"
-
-# elif defined(_M_ARM)
-#  if _M_ARM == 4
-#   define ARCHITECTURE_ID "ARMV4I"
-#  elif _M_ARM == 5
-#   define ARCHITECTURE_ID "ARMV5I"
-#  else
-#   define ARCHITECTURE_ID "ARMV" STRINGIFY(_M_ARM)
-#  endif
-
-# elif defined(_M_MIPS)
-#  define ARCHITECTURE_ID "MIPS"
-
-# elif defined(_M_SH)
-#  define ARCHITECTURE_ID "SHx"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__WATCOMC__)
-# if defined(_M_I86)
-#  define ARCHITECTURE_ID "I86"
-
-# elif defined(_M_IX86)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__IAR_SYSTEMS_ICC__) || defined(__IAR_SYSTEMS_ICC)
-# if defined(__ICCARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__ICCRX__)
-#  define ARCHITECTURE_ID "RX"
-
-# elif defined(__ICCRH850__)
-#  define ARCHITECTURE_ID "RH850"
-
-# elif defined(__ICCRL78__)
-#  define ARCHITECTURE_ID "RL78"
-
-# elif defined(__ICCRISCV__)
-#  define ARCHITECTURE_ID "RISCV"
-
-# elif defined(__ICCAVR__)
-#  define ARCHITECTURE_ID "AVR"
-
-# elif defined(__ICC430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__ICCV850__)
-#  define ARCHITECTURE_ID "V850"
-
-# elif defined(__ICC8051__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__ICCSTM8__)
-#  define ARCHITECTURE_ID "STM8"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__ghs__)
-# if defined(__PPC64__)
-#  define ARCHITECTURE_ID "PPC64"
-
-# elif defined(__ppc__)
-#  define ARCHITECTURE_ID "PPC"
-
-# elif defined(__ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__x86_64__)
-#  define ARCHITECTURE_ID "x64"
-
-# elif defined(__i386__)
-#  define ARCHITECTURE_ID "X86"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__clang__) && defined(__ti__)
-# if defined(__ARM_ARCH)
-#  define ARCHITECTURE_ID "Arm"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-#elif defined(__TI_COMPILER_VERSION__)
-# if defined(__TI_ARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__MSP430__)
-#  define ARCHITECTURE_ID "MSP430"
-
-# elif defined(__TMS320C28XX__)
-#  define ARCHITECTURE_ID "TMS320C28x"
-
-# elif defined(__TMS320C6X__) || defined(_TMS320C6X)
-#  define ARCHITECTURE_ID "TMS320C6x"
-
-# else /* unknown architecture */
-#  define ARCHITECTURE_ID ""
-# endif
-
-# elif defined(__ADSPSHARC__)
-#  define ARCHITECTURE_ID "SHARC"
-
-# elif defined(__ADSPBLACKFIN__)
-#  define ARCHITECTURE_ID "Blackfin"
-
-#elif defined(__TASKING__)
-
-# if defined(__CTC__) || defined(__CPTC__)
-#  define ARCHITECTURE_ID "TriCore"
-
-# elif defined(__CMCS__)
-#  define ARCHITECTURE_ID "MCS"
-
-# elif defined(__CARM__)
-#  define ARCHITECTURE_ID "ARM"
-
-# elif defined(__CARC__)
-#  define ARCHITECTURE_ID "ARC"
-
-# elif defined(__C51__)
-#  define ARCHITECTURE_ID "8051"
-
-# elif defined(__CPCP__)
-#  define ARCHITECTURE_ID "PCP"
-
-# else
-#  define ARCHITECTURE_ID ""
-# endif
-
-#else
-#  define ARCHITECTURE_ID
-#endif
-
-/* Convert integer to decimal digit literals.  */
-#define DEC(n)                   \
-  ('0' + (((n) / 10000000)%10)), \
-  ('0' + (((n) / 1000000)%10)),  \
-  ('0' + (((n) / 100000)%10)),   \
-  ('0' + (((n) / 10000)%10)),    \
-  ('0' + (((n) / 1000)%10)),     \
-  ('0' + (((n) / 100)%10)),      \
-  ('0' + (((n) / 10)%10)),       \
-  ('0' +  ((n) % 10))
-
-/* Convert integer to hex digit literals.  */
-#define HEX(n)             \
-  ('0' + ((n)>>28 & 0xF)), \
-  ('0' + ((n)>>24 & 0xF)), \
-  ('0' + ((n)>>20 & 0xF)), \
-  ('0' + ((n)>>16 & 0xF)), \
-  ('0' + ((n)>>12 & 0xF)), \
-  ('0' + ((n)>>8  & 0xF)), \
-  ('0' + ((n)>>4  & 0xF)), \
-  ('0' + ((n)     & 0xF))
-
-/* Construct a string literal encoding the version number. */
-#ifdef COMPILER_VERSION
-char const* info_version = "INFO" ":" "compiler_version[" COMPILER_VERSION "]";
-
-/* Construct a string literal encoding the version number components. */
-#elif defined(COMPILER_VERSION_MAJOR)
-char const info_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','[',
-  COMPILER_VERSION_MAJOR,
-# ifdef COMPILER_VERSION_MINOR
-  '.', COMPILER_VERSION_MINOR,
-#  ifdef COMPILER_VERSION_PATCH
-   '.', COMPILER_VERSION_PATCH,
-#   ifdef COMPILER_VERSION_TWEAK
-    '.', COMPILER_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct a string literal encoding the internal version number. */
-#ifdef COMPILER_VERSION_INTERNAL
-char const info_version_internal[] = {
-  'I', 'N', 'F', 'O', ':',
-  'c','o','m','p','i','l','e','r','_','v','e','r','s','i','o','n','_',
-  'i','n','t','e','r','n','a','l','[',
-  COMPILER_VERSION_INTERNAL,']','\0'};
-#elif defined(COMPILER_VERSION_INTERNAL_STR)
-char const* info_version_internal = "INFO" ":" "compiler_version_internal[" COMPILER_VERSION_INTERNAL_STR "]";
-#endif
-
-/* Construct a string literal encoding the version number components. */
-#ifdef SIMULATE_VERSION_MAJOR
-char const info_simulate_version[] = {
-  'I', 'N', 'F', 'O', ':',
-  's','i','m','u','l','a','t','e','_','v','e','r','s','i','o','n','[',
-  SIMULATE_VERSION_MAJOR,
-# ifdef SIMULATE_VERSION_MINOR
-  '.', SIMULATE_VERSION_MINOR,
-#  ifdef SIMULATE_VERSION_PATCH
-   '.', SIMULATE_VERSION_PATCH,
-#   ifdef SIMULATE_VERSION_TWEAK
-    '.', SIMULATE_VERSION_TWEAK,
-#   endif
-#  endif
-# endif
-  ']','\0'};
-#endif
-
-/* Construct the string literal in pieces to prevent the source from
-   getting matched.  Store it in a pointer rather than an array
-   because some compilers will just produce instructions to fill the
-   array rather than assigning a pointer to a static array.  */
-char const* info_platform = "INFO" ":" "platform[" PLATFORM_ID "]";
-char const* info_arch = "INFO" ":" "arch[" ARCHITECTURE_ID "]";
-
-
-
-#define CXX_STD_98 199711L
-#define CXX_STD_11 201103L
-#define CXX_STD_14 201402L
-#define CXX_STD_17 201703L
-#define CXX_STD_20 202002L
-#define CXX_STD_23 202302L
-
-#if defined(__INTEL_COMPILER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > CXX_STD_17
-#    define CXX_STD _MSVC_LANG
-#  elif _MSVC_LANG == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14 && __cplusplus > CXX_STD_17
-#    define CXX_STD CXX_STD_20
-#  elif _MSVC_LANG > CXX_STD_14
-#    define CXX_STD CXX_STD_17
-#  elif defined(__INTEL_CXX11_MODE__) && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  elif defined(__INTEL_CXX11_MODE__)
-#    define CXX_STD CXX_STD_11
-#  else
-#    define CXX_STD CXX_STD_98
-#  endif
-#elif defined(_MSC_VER) && defined(_MSVC_LANG)
-#  if _MSVC_LANG > __cplusplus
-#    define CXX_STD _MSVC_LANG
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__NVCOMPILER)
-#  if __cplusplus == CXX_STD_17 && defined(__cpp_aggregate_paren_init)
-#    define CXX_STD CXX_STD_20
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif defined(__INTEL_COMPILER) || defined(__PGI)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_namespace_attributes)
-#    define CXX_STD CXX_STD_17
-#  elif __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif (defined(__IBMCPP__) || defined(__ibmxl__)) && defined(__linux__)
-#  if __cplusplus == CXX_STD_11 && defined(__cpp_aggregate_nsdmi)
-#    define CXX_STD CXX_STD_14
-#  else
-#    define CXX_STD __cplusplus
-#  endif
-#elif __cplusplus == 1 && defined(__GXX_EXPERIMENTAL_CXX0X__)
-#  define CXX_STD CXX_STD_11
-#else
-#  define CXX_STD __cplusplus
-#endif
-
-const char* info_language_standard_default = "INFO" ":" "standard_default["
-#if CXX_STD > CXX_STD_23
-  "26"
-#elif CXX_STD > CXX_STD_20
-  "23"
-#elif CXX_STD > CXX_STD_17
-  "20"
-#elif CXX_STD > CXX_STD_14
-  "17"
-#elif CXX_STD > CXX_STD_11
-  "14"
-#elif CXX_STD >= CXX_STD_11
-  "11"
-#else
-  "98"
-#endif
-"]";
-
-const char* info_language_extensions_default = "INFO" ":" "extensions_default["
-#if (defined(__clang__) || defined(__GNUC__) || defined(__xlC__) ||           \
-     defined(__TI_COMPILER_VERSION__)) &&                                     \
-  !defined(__STRICT_ANSI__)
-  "ON"
-#else
-  "OFF"
-#endif
-"]";
-
-/*--------------------------------------------------------------------------*/
-
-int main(int argc, char* argv[])
-{
-  int require = 0;
-  require += info_compiler[argc];
-  require += info_platform[argc];
-  require += info_arch[argc];
-#ifdef COMPILER_VERSION_MAJOR
-  require += info_version[argc];
-#endif
-#ifdef COMPILER_VERSION_INTERNAL
-  require += info_version_internal[argc];
-#endif
-#ifdef SIMULATE_ID
-  require += info_simulate[argc];
-#endif
-#ifdef SIMULATE_VERSION_MAJOR
-  require += info_simulate_version[argc];
-#endif
-#if defined(__CRAYXT_COMPUTE_LINUX_TARGET)
-  require += info_cray[argc];
-#endif
-  require += info_language_standard_default[argc];
-  require += info_language_extensions_default[argc];
-  (void)argv;
-  return require;
-}
diff --git a/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out b/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
deleted file mode 100755
index 78617c271080d9e2231a72abde01b7fc302df0f2..0000000000000000000000000000000000000000
GIT binary patch
literal 0
HcmV?d00001

literal 15576
zcmeHOU2Ggz6~4Pp8VBO66YAo|6&V#&xfD-!9mi|~rt8>ik0t+<)Dfm3Ovbxod&T}S
zI~zHbfFJ|KSgHCWK^`a|p+10AK_ygpp*RW@f?AY5AVqyZE~1jD($*C}N=fA9oO{n%
z&tBFAfj~UWwRX;&@0{=4JLk^qT+f{SLVA288i@#QE#hMWHKSc2DKcC=LOUQ*A}QKn
zdxz)}w}8GwV#=OU0<5ZCjW)_w!dpNhuM>Bg$U77aeW=DGM2WoZ+65dCG?s#n19>~q
zK)Nnpqz+iJz22XJWN3!m*5yZu$1=#np{(^N|FwZeIYW6lO_F)2B5#9u8^mLIh5BR3
z`NW*yCrSC#WeRNAQgSPV&RZm&E{DmVCH8^sfmi+Pzti9S#CySzVT3MuzFBgA9|s;y
zts?%DEl=}t>TkPwFev{lDZS!QJ~!LncPO9j$>)mI#h%4ve@}m(St*&lvS%Du96oqX
zjZU5r(Q{%IG3G}^q(P684lc5x@2&8`v?ITo{Nh`0EI$0;<EPL3@J07)HwJ$F*z4$n
z$AK}?2ODDe;f6N;F!ry=8F0F@iQ@=h`<vi64x<T<eK*5Dv<)t7d%jRA+7;jNeA^cG
z*z|;*bv<`JSMgnMdSWPFD!S9oY~EG2<`x^KCqqFBPOb=HGmDNrmn%B?+(WJabH&eQ
z?zsnNtRK}veQ!PkOw<yHXB0j<K6Y%#?llkh3Eu5B<#%2b<_KmJ{;)+vR6GKb&#xan
z_H{TdTf_yzst0nr1^9dyouTn{&(~Y~K83H-b<OxH1#C?zJL9akYq()3zfKMJ2sbqR
zVZysL{0YM28vZoltM>`n;2<djO8->=r%Om0t^{!UN|E^003JMl*8;fwepcbbZJ2>D
z17QZj41^g7GZ1DV%)oys1AmIW?{C)9wN`6o=jB5}SYKZCqqQs6($8Bj$sW<3czta7
zrB7SSzqgkDuyOx%I<cC#Y@Hu?860XIOThZ`oEba#CFu|ND;Vee&X-Z#d)@DV&~p@e
zcWo_p@Ekf`A_@M_NdF_>M{)P2wY*_neB(ar;`J6Q^1SuZrhh90I6?thYio0{gTq^V
z9N)Qt0+>bh@Cj>a;58F=t>st!Hfv?zF2HLYR{>hj)M~ZocMby(Idy4kyqD&-_G1TA
z0^|L09(+$gjOEW=vzDuCzf9l6AzLdQzk^6C>1);nD{>|FtcX3g8cE*-{5RX+&o#qU
zfb$&}_X-hvc1L?X%7td$5dEvo@Rjt<Q!qvK`K!+u4mE6H2Eq)483;2FW+2Q!n1L_@
zVFtnsgc%4k5N4n;1Nc7co!Z#s$kfqHsZh@4UGF5kg*?^h-C(!RxLze!DxQqXmgqCp
zPP~_Q5~qY@l=F^1SMmxc$MNkdfsU71I7$2Pez2HzyezyMoO7yq|77CBWN{aLw}`z|
z>b9v#IjTrk%SSq4cz8t9Z`NvkASX6zwQ-R6t`%G4q2nU5*dFQHv#a${c%_FpzH9CT
z|GUs(c$a(=hZyqT2K*_+2luvrB|6l0OY}RyL?CQo2Eq)483;2FW+2Q!n1L_@VFtns
zgc<n%$^h3Ja($tyViaPYhROOFO+TmUkC48HBo{!ok-kcGjklA|b&p-7^S?|7Nay-T
zuJdL4Up8wcbXle1L9PibQ_&#SA!1u2`@57Xen9fwB=P@1Y#mC}x4UTXGzI2<lavT3
z-jt2`H)?7;07}<Q(&NO3H^p+ioJaU~Q|boU-zJ^=q4586!S&<Yb<B09hM_#Tj+E<0
zxlWYpLPv*&jvC$YJm78v{>|?-6Gm^mw=bTI9}(M_?oGtE>l|>*-wyFsO?Sb0h={!+
zWhhH;z@eG{2c<n$uPbMFEVqq__Xs@?BNFcr>r{uz{-1)Kc5$0XrWjEY>--JCg@$Lq
zybs0+M%lQ=)dTHL1vPBXgSKDn5x3KI^AuSh2e~hLo8b9i(zg+Ze)W3arwKPw%9GEt
zAA`C-+9vqAR8}E=ia09)iNzckKb}$`$GJgxyN0JA4>*2<>XzlR6Y$-QcoeQe!c{aV
zbO0QWOV4K);?Qrm7XK*Vn14ObqY{6wNRdCsA17RoKLfbIP66p}gD-7^i=heUGw#sL
z%n&^b8_SxRa#`39jwgC^#kmqc`+`bzxGL<lWse*moJiZ&@Nr=ee{yngVr)p*qvKP@
z2FLBGk&y?|)Asb>vGFw2z`I$;cc9#T3M$&OxuRXIxLK{DJr%4<r;7J%rDQL_V=^d}
zmm}bZYD&YWX#y+aa}Y`^m#;^Ia(7A1JH`2`Gw<5}_;gJ<@FPHBLqH!QLZ!Z)o*ae}
z{>A|MgFA4=qf@o|aHvH*ve`<7fp@C^Z}L-trauP|X60<bcV<EQo{|f^mn*{03d+JP
zmVDQoFILU6S1P-ne>MQkR&($}k6f0Z!DC}RzB4bR`+`$h5N7sl5xP*)_mqVmb~Y$B
z*gQAyAVHWiRi+O)6{egB(<{lTHr)k#&T|T`y^sY4Yl>kzp69^ukiq*9&MD+F&{qj!
z!Nx4-VMhgnYzh-5sNfd;z$yM8?c#kKE`|Ej;ZC~WvgG?VcY?mb_I^<CUK=GaNqm+m
z!ddY54eR}|6XY)vpXCSGktBcLGCZd7ze#+S20N0}`JVv%uW;|?@$-6wB_BVpNA&SK
zz{j-+^Lf3(@=@v+j}ddnd|r3t0K*|OpVvPudA$QJvg!H%ETFhHVLq=%Sn@iK$IpH&
zKM#Cd>#)x2ow`)r$~g*-pJ0LaH_R#XdA-Gw*IV4be*E76F2-eh{eD9C6<$|@i){M*
zJqc)#&-W>o-_jDM-LB;CcY=JrkFw--FLmGWn=Hh>NB#5h3j<MThTMwFO4PRm*Y#&$
z5Bq2S3*^9(&p#&U$Nw{pzfOFX(@Z4E`DYl%2df!*4kE_udHx-p?$0{Q-vTEV;PZNa
zy$7Rho$pH9(wYAX7;x_CvaPS%_;-=~`$t~SGmq!-HQ-|Yn9sjsT0I0Hv~DHpTjsNT
z6D&bKuMgLW&(|pjU>?is8egQyGp=NkR2Ix*eG_&N<MH#lCP{qVAIBPOEdU@!?sXIM
z@%uH{m>-mU?gjnI6!0fxJOD<V10E0OWjA0v_8`Ceu+pC7j>xE~uqJHI{{_C3gSJN_
HXsY--f}ZvE

diff --git a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml b/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
deleted file mode 100644
index 731c5465937..00000000000
--- a/cmake-build-debug/CMakeFiles/CMakeConfigureLog.yaml
+++ /dev/null
@@ -1,562 +0,0 @@
-
----
-events:
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineSystem.cmake:205 (message)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      The system is: Linux - 6.10.2-273-tkg-eevdf - x86_64
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCCompiler.cmake:123 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the C compiler identification source file "CMakeCCompilerId.c" succeeded.
-      Compiler: /usr/bin/cc 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the C compiler identification source "CMakeCCompilerId.c" produced "a.out"
-      
-      The C compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdC/a.out
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:17 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerId.cmake:64 (__determine_compiler_id_test)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCXXCompiler.cmake:126 (CMAKE_DETERMINE_COMPILER_ID)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Compiling the CXX compiler identification source file "CMakeCXXCompilerId.cpp" succeeded.
-      Compiler: /usr/bin/c++ 
-      Build flags: 
-      Id flags:  
-      
-      The output was:
-      0
-      
-      
-      Compilation of the CXX compiler identification source "CMakeCXXCompilerId.cpp" produced "a.out"
-      
-      The CXX compiler identification is GNU, found in:
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/3.30.5/CompilerIdCXX/a.out
-      
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting C compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_C_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca
-        [1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s
-        GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: 91e980a230f7d2e39f93577991713edd
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/'
-         as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.'
-        [2/2] : && /usr/bin/cc  -v -Wl,-v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/cc
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed C implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-OLEfcT']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_834ca]
-        ignore line: [[1/2] /usr/bin/cc   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1 -quiet -v /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCCompilerABI.c -quiet -dumpdir CMakeFiles/cmTC_834ca.dir/ -dumpbase CMakeCCompilerABI.c.c -dumpbase-ext .c -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/ccfiH50L.s]
-        ignore line: [GNU C17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: 91e980a230f7d2e39f93577991713edd]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o /tmp/ccfiH50L.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o' '-c' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.']
-        ignore line: [[2/2] : && /usr/bin/cc  -v -Wl -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -o cmTC_834ca   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/cc]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_834ca' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_834ca.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/cc3hcm2q.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_834ca] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o] ==> ignore
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [-lc] ==> lib [c]
-          arg [-lgcc] ==> lib [gcc]
-          arg [--push-state] ==> ignore
-          arg [--as-needed] ==> ignore
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [--pop-state] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/cc3hcm2q.res -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lgcc_s --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_834ca /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_834ca.dir/CMakeCCompilerABI.c.o -lgcc --push-state --as-needed -lgcc_s --pop-state -lc -lgcc --push-state --as-needed -lgcc_s --pop-state /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'C': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [gcc;gcc_s;c;gcc;gcc_s]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the C compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:74 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    checks:
-      - "Detecting CXX compiler ABI info"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: ""
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_CXX_SCAN_FOR_MODULES: "OFF"
-      CMAKE_EXE_LINKER_FLAGS: ""
-    buildResult:
-      variable: "CMAKE_CXX_ABI_COMPILED"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a
-        [1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s
-        GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)
-        	compiled by GNU C version 14.2.1 20240910, GMP version 6.3.0, MPFR version 4.2.1, MPC version 1.3.1, isl version isl-0.27-GMP
-        
-        GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
-        ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"
-        #include "..." search starts here:
-        #include <...> search starts here:
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include
-         /usr/local/include
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed
-         /usr/include
-        End of search list.
-        Compiler executable checksum: fce5a105c47978e141f61a441742cadf
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/'
-         as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s
-        GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.'
-        [2/2] : && /usr/bin/c++  -v -Wl,-v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :
-        Using built-in specs.
-        COLLECT_GCC=/usr/bin/c++
-        COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper
-        Target: x86_64-pc-linux-gnu
-        Configured with: /build/gcc/src/gcc/configure --enable-languages=ada,c,c++,d,fortran,go,lto,m2,objc,obj-c++,rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror
-        Thread model: posix
-        Supported LTO compression algorithms: zlib zstd
-        gcc version 14.2.1 20240910 (GCC) 
-        COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/
-        LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
-         /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        collect2 version 14.2.1 20240910
-        /usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o
-        GNU ld (GNU Binutils) 2.43.0
-        COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.'
-        
-      exitCode: 0
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:182 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit include dir info: rv=done
-        found start of include info
-        found start of implicit include info
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-          add: [/usr/local/include]
-          add: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-          add: [/usr/include]
-        end of search list found
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1] ==> [/usr/include/c++/14.2.1]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu] ==> [/usr/include/c++/14.2.1/x86_64-pc-linux-gnu]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward] ==> [/usr/include/c++/14.2.1/backward]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        collapse include dir [/usr/local/include] ==> [/usr/local/include]
-        collapse include dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        collapse include dir [/usr/include] ==> [/usr/include]
-        implicit include dirs: [/usr/include/c++/14.2.1;/usr/include/c++/14.2.1/x86_64-pc-linux-gnu;/usr/include/c++/14.2.1/backward;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include;/usr/local/include;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed;/usr/include]
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:218 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Parsed CXX implicit link information:
-        link line regex: [^( *|.*[/\\])(ld[0-9]*(\\.[a-z]+)?|CMAKE_LINK_STARTFILE-NOTFOUND|([^/\\]+-)?ld|collect2)[^/\\]*( |$)]
-        linker tool regex: [^[ 	]*(->|")?[ 	]*(([^"]*[/\\])?(ld[0-9]*(\\.[a-z]+)?))("|,| |$)]
-        ignore line: [Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-sO5Vxc']
-        ignore line: []
-        ignore line: [Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_8a98a]
-        ignore line: [[1/2] /usr/bin/c++   -fdiagnostics-color=always   -v -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -c /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/cc1plus -quiet -v -D_GNU_SOURCE /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeCXXCompilerABI.cpp -quiet -dumpdir CMakeFiles/cmTC_8a98a.dir/ -dumpbase CMakeCXXCompilerABI.cpp.cpp -dumpbase-ext .cpp -mtune=generic -march=x86-64 -version -fdiagnostics-color=always -o /tmp/cc0fUf3E.s]
-        ignore line: [GNU C++17 (GCC) version 14.2.1 20240910 (x86_64-pc-linux-gnu)]
-        ignore line: [	compiled by GNU C version 14.2.1 20240910  GMP version 6.3.0  MPFR version 4.2.1  MPC version 1.3.1  isl version isl-0.27-GMP]
-        ignore line: []
-        ignore line: [GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072]
-        ignore line: [ignoring nonexistent directory "/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../x86_64-pc-linux-gnu/include"]
-        ignore line: [#include "..." search starts here:]
-        ignore line: [#include <...> search starts here:]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/x86_64-pc-linux-gnu]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../include/c++/14.2.1/backward]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include]
-        ignore line: [ /usr/local/include]
-        ignore line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/include-fixed]
-        ignore line: [ /usr/include]
-        ignore line: [End of search list.]
-        ignore line: [Compiler executable checksum: fce5a105c47978e141f61a441742cadf]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/']
-        ignore line: [ as -v --64 -o CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o /tmp/cc0fUf3E.s]
-        ignore line: [GNU assembler version 2.43.0 (x86_64-pc-linux-gnu) using BFD version (GNU Binutils) 2.43.0]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-fdiagnostics-color=always' '-v' '-o' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o' '-c' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.']
-        ignore line: [[2/2] : && /usr/bin/c++  -v -Wl -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -o cmTC_8a98a   && :]
-        ignore line: [Using built-in specs.]
-        ignore line: [COLLECT_GCC=/usr/bin/c++]
-        ignore line: [COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper]
-        ignore line: [Target: x86_64-pc-linux-gnu]
-        ignore line: [Configured with: /build/gcc/src/gcc/configure --enable-languages=ada c c++ d fortran go lto m2 objc obj-c++ rust --enable-bootstrap --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://gitlab.archlinux.org/archlinux/packaging/packages/gcc/-/issues --with-build-config=bootstrap-lto --with-linker-hash-style=gnu --with-system-zlib --enable-__cxa_atexit --enable-cet=auto --enable-checking=release --enable-clocale=gnu --enable-default-pie --enable-default-ssp --enable-gnu-indirect-function --enable-gnu-unique-object --enable-libstdcxx-backtrace --enable-link-serialization=1 --enable-linker-build-id --enable-lto --enable-multilib --enable-plugin --enable-shared --enable-threads=posix --disable-libssp --disable-libstdcxx-pch --disable-werror]
-        ignore line: [Thread model: posix]
-        ignore line: [Supported LTO compression algorithms: zlib zstd]
-        ignore line: [gcc version 14.2.1 20240910 (GCC) ]
-        ignore line: [COMPILER_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/]
-        ignore line: [LIBRARY_PATH=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/:/lib/../lib/:/usr/lib/../lib/:/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../:/lib/:/usr/lib/]
-        ignore line: [COLLECT_GCC_OPTIONS='-v' '-o' 'cmTC_8a98a' '-shared-libgcc' '-mtune=generic' '-march=x86-64' '-dumpdir' 'cmTC_8a98a.']
-        link line: [ /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2 -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/collect2] ==> ignore
-          arg [-plugin] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so] ==> ignore
-          arg [-plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper] ==> ignore
-          arg [-plugin-opt=-fresolution=/tmp/ccjzVWgz.res] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lc] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc_s] ==> ignore
-          arg [-plugin-opt=-pass-through=-lgcc] ==> ignore
-          arg [--build-id] ==> ignore
-          arg [--eh-frame-hdr] ==> ignore
-          arg [--hash-style=gnu] ==> ignore
-          arg [-m] ==> ignore
-          arg [elf_x86_64] ==> ignore
-          arg [-dynamic-linker] ==> ignore
-          arg [/lib64/ld-linux-x86-64.so.2] ==> ignore
-          arg [-pie] ==> ignore
-          arg [-o] ==> ignore
-          arg [cmTC_8a98a] ==> ignore
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib]
-          arg [-L/lib/../lib] ==> dir [/lib/../lib]
-          arg [-L/usr/lib/../lib] ==> dir [/usr/lib/../lib]
-          arg [-L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..]
-          arg [-v] ==> ignore
-          arg [CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o] ==> ignore
-          arg [-lstdc++] ==> lib [stdc++]
-          arg [-lm] ==> lib [m]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [-lc] ==> lib [c]
-          arg [-lgcc_s] ==> lib [gcc_s]
-          arg [-lgcc] ==> lib [gcc]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o]
-          arg [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        ignore line: [collect2 version 14.2.1 20240910]
-        ignore line: [/usr/bin/ld -plugin /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/liblto_plugin.so -plugin-opt=/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/lto-wrapper -plugin-opt=-fresolution=/tmp/ccjzVWgz.res -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc -plugin-opt=-pass-through=-lc -plugin-opt=-pass-through=-lgcc_s -plugin-opt=-pass-through=-lgcc --build-id --eh-frame-hdr --hash-style=gnu -m elf_x86_64 -dynamic-linker /lib64/ld-linux-x86-64.so.2 -pie -o cmTC_8a98a /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1 -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../.. -v CMakeFiles/cmTC_8a98a.dir/CMakeCXXCompilerABI.cpp.o -lstdc++ -lm -lgcc_s -lgcc -lc -lgcc_s -lgcc /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o]
-        linker tool for 'CXX': /usr/bin/ld
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/Scrt1.o] ==> [/usr/lib/Scrt1.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crti.o] ==> [/usr/lib/crti.o]
-        collapse obj [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib/crtn.o] ==> [/usr/lib/crtn.o]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1] ==> [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../../../lib] ==> [/usr/lib]
-        collapse library dir [/lib/../lib] ==> [/lib]
-        collapse library dir [/usr/lib/../lib] ==> [/usr/lib]
-        collapse library dir [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/../../..] ==> [/usr/lib]
-        implicit libs: [stdc++;m;gcc_s;gcc;c;gcc_s;gcc]
-        implicit objs: [/usr/lib/Scrt1.o;/usr/lib/crti.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtbeginS.o;/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1/crtendS.o;/usr/lib/crtn.o]
-        implicit dirs: [/usr/lib/gcc/x86_64-pc-linux-gnu/14.2.1;/usr/lib;/lib]
-        implicit fwks: []
-      
-      
-  -
-    kind: "message-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CMakeDetermineLinkerId.cmake:40 (message)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeDetermineCompilerABI.cmake:255 (cmake_determine_linker_id)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CMakeTestCXXCompiler.cmake:26 (CMAKE_DETERMINE_COMPILER_ABI)"
-      - "CMakeLists.txt:11 (project)"
-    message: |
-      Running the CXX compiler's linker: "/usr/bin/ld" "-v"
-      GNU ld (GNU Binutils) 2.43.0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/Internal/CheckSourceCompiles.cmake:101 (try_compile)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckCSourceCompiles.cmake:52 (cmake_check_source_compiles)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:97 (CHECK_C_SOURCE_COMPILES)"
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/FindThreads.cmake:163 (_threads_check_libc)"
-      - "CMakeLists.txt:235 (find_package)"
-    checks:
-      - "Performing Test CMAKE_HAVE_LIBC_PTHREAD"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk"
-    cmakeVariables:
-      CMAKE_C_FLAGS: ""
-      CMAKE_C_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "CMAKE_HAVE_LIBC_PTHREAD"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_85c24
-        [1/2] /usr/bin/cc -DCMAKE_HAVE_LIBC_PTHREAD  -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_85c24.dir/src.c.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-9jqBnk/src.c
-        [2/2] : && /usr/bin/cc   CMakeFiles/cmTC_85c24.dir/src.c.o -o cmTC_85c24   && :
-        
-      exitCode: 0
-  -
-    kind: "try_compile-v1"
-    backtrace:
-      - "/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/share/cmake-3.30/Modules/CheckIncludeFileCXX.cmake:89 (try_compile)"
-      - "cmake/modules/Findcereal.cmake:17 (CHECK_INCLUDE_FILE_CXX)"
-      - "CMakeLists.txt:544 (find_package)"
-    checks:
-      - "Looking for C++ include cereal/cereal.hpp"
-    directories:
-      source: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
-      binary: "/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2"
-    cmakeVariables:
-      CMAKE_CXX_FLAGS: " -fext-numeric-literals -Wall -Wno-reorder"
-      CMAKE_CXX_FLAGS_DEBUG: "-g"
-      CMAKE_EXE_LINKER_FLAGS: ""
-      CMAKE_MODULE_PATH: "/home/scarjit/Git/OrcaSlicer/cmake/modules/"
-      CMAKE_POSITION_INDEPENDENT_CODE: "ON"
-    buildResult:
-      variable: "HAVE_CEREAL_H"
-      cached: true
-      stdout: |
-        Change Dir: '/home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2'
-        
-        Run Build Command(s): /home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -v cmTC_e14a3
-        [1/2] /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
-        FAILED: CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o 
-        /usr/bin/c++   -fext-numeric-literals -Wall -Wno-reorder  -std=gnu++17 -fPIE -fdiagnostics-color=always -o CMakeFiles/cmTC_e14a3.dir/CheckIncludeFile.cxx.o -c /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx
-        /home/scarjit/Git/OrcaSlicer/cmake-build-debug/CMakeFiles/CMakeScratch/TryCompile-NyNFM2/CheckIncludeFile.cxx:1:10: fatal error: cereal/cereal.hpp: No such file or directory
-            1 | #include <cereal/cereal.hpp>
-              |          ^~~~~~~~~~~~~~~~~~~
-        compilation terminated.
-        ninja: build stopped: subcommand failed.
-        
-      exitCode: 1
-...
diff --git a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt b/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
deleted file mode 100644
index 79f8f4ca097..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-Debug-log.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/cmake/linux/x64/bin/cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja -G Ninja -S /home/scarjit/Git/OrcaSlicer -B /home/scarjit/Git/OrcaSlicer/cmake-build-debug
--- The C compiler identification is GNU 14.2.1
--- The CXX compiler identification is GNU 14.2.1
--- Detecting C compiler ABI info
--- Detecting C compiler ABI info - done
--- Check for working C compiler: /usr/bin/cc - skipped
--- Detecting C compile features
--- Detecting C compile features - done
--- Detecting CXX compiler ABI info
--- Detecting CXX compiler ABI info - done
--- Check for working CXX compiler: /usr/bin/c++ - skipped
--- Detecting CXX compile features
--- Detecting CXX compile features - done
--- SLIC3R_ASAN: OFF
--- SLIC3R_BUILD_SANDBOXES: OFF
--- SLIC3R_BUILD_TESTS: OFF
--- SLIC3R_DESKTOP_INTEGRATION: ON
--- SLIC3R_FHS: OFF
--- SLIC3R_GTK: 2
--- SLIC3R_GUI: ON
--- SLIC3R_MSVC_COMPILE_PARALLEL: ON
--- SLIC3R_MSVC_PDB: ON
--- SLIC3R_PCH: ON
--- SLIC3R_PERL_XS: OFF
--- SLIC3R_PROFILE: OFF
--- SLIC3R_STATIC: OFF
--- SLIC3R_WX_STABLE: OFF
--- SLIC3R_STATIC: OFF
--- CMAKE_PREFIX_PATH: (default)
--- PROJECT_SOURCE_DIR: /home/scarjit/Git/OrcaSlicer
--- CMAKE_MODULE_PATH: /home/scarjit/Git/OrcaSlicer/cmake/modules/
--- Found PkgConfig: /usr/bin/pkg-config (found version "2.3.0")
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD
--- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
--- Found Threads: TRUE
--- Found DBus: /usr/include/dbus-1.0;/usr/lib/dbus-1.0/include
--- LIBDIR: /home/scarjit/Git/OrcaSlicer/src
--- LIBDIR_BIN: /home/scarjit/Git/OrcaSlicer/cmake-build-debug/src
-CMake Warning (dev) at CMakeLists.txt:415 (find_package):
-  Policy CMP0167 is not set: The FindBoost module is removed.  Run "cmake
-  --help-policy CMP0167" for policy details.  Use the cmake_policy command to
-  set the policy and suppress this warning.
-
-This warning is for project developers.  Use -Wno-dev to suppress it.
-
--- Found Boost: /usr/lib/cmake/Boost-1.86.0/BoostConfig.cmake (found suitable version "1.86.0", minimum required is "1.66") found components: system filesystem thread log locale regex chrono atomic date_time iostreams program_options
--- TBB found in /usr/lib/cmake/TBB
--- Found OpenSSL: /usr/lib/libcrypto.so (found version "3.4.0")
--- Found CURL: /usr/lib/libcurl.so (found version "8.11.1") 
--- Found ZLIB: /usr/lib/libz.so (found version "1.3.1")
--- Found Eigen3: /usr/include/eigen3 (Required is at least version "3.3")
--- Found EXPAT: /usr/lib/libexpat.so (found version "2.6.4")
--- Found PNG: /usr/lib/libpng.so (found version "1.6.44")
--- Found OpenGL: /usr/lib/libOpenGL.so
-GLEW_ROOT: 
--- Found GLEW: /usr/include (found version "2.2.0")
--- Could NOT find cereal (missing: cereal_DIR)
--- Looking for C++ include cereal/cereal.hpp
--- Looking for C++ include cereal/cereal.hpp - not found
-CMake Error at cmake/modules/Findcereal.cmake:21 (message):
-  Cereal library not found.  Please install the dependency.
-Call Stack (most recent call first):
-  CMakeLists.txt:544 (find_package)
-
-
--- Configuring incomplete, errors occurred!
diff --git a/cmake-build-debug/CMakeFiles/clion-environment.txt b/cmake-build-debug/CMakeFiles/clion-environment.txt
deleted file mode 100644
index 292290e6b02..00000000000
--- a/cmake-build-debug/CMakeFiles/clion-environment.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-ToolSet: 1.0 (local)Ninja: 1.12.1@/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
-Options: 
-
-Options:-DCMAKE_MAKE_PROGRAM=/home/scarjit/.local/share/JetBrains/Toolbox/apps/clion/bin/ninja/linux/x64/ninja
\ No newline at end of file
diff --git a/cmake-build-debug/CMakeFiles/cmake.check_cache b/cmake-build-debug/CMakeFiles/cmake.check_cache
deleted file mode 100644
index 3dccd731726..00000000000
--- a/cmake-build-debug/CMakeFiles/cmake.check_cache
+++ /dev/null
@@ -1 +0,0 @@
-# This file is generated by cmake for dependency checking of the CMakeCache.txt file

From f0a606a391fe7cb28e2fed67b16b82b77b7ac042 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:54:13 +0100
Subject: [PATCH 28/59] fix: restore Project.xml

---
 .idea/codeStyles/Project.xml | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 .idea/codeStyles/Project.xml

diff --git a/.idea/codeStyles/Project.xml b/.idea/codeStyles/Project.xml
new file mode 100644
index 00000000000..f60388162da
--- /dev/null
+++ b/.idea/codeStyles/Project.xml
@@ -0,0 +1,7 @@
+<component name="ProjectCodeStyleConfiguration">
+  <code_scheme name="Project" version="173">
+    <clangFormatSettings>
+      <option name="ENABLED" value="true" />
+    </clangFormatSettings>
+  </code_scheme>
+</component>
\ No newline at end of file

From 500c794d34e86e8ab1e4b2c5364c174c9d7c00a7 Mon Sep 17 00:00:00 2001
From: Ferdinand Linnenberg <ferdinand@linnenberg.dev>
Date: Thu, 12 Dec 2024 15:55:35 +0100
Subject: [PATCH 29/59] fix: order

---
 resources/profiles/BBL.json | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json
index 7e6e041d4d1..356da0b297c 100644
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -737,14 +737,14 @@
             "name": "Generic PLA-CF @base",
             "sub_path": "filament/Generic PLA-CF @base.json"
         },
-        {
-            "name": "Bambu PLA-CF @base",
-            "sub_path": "filament/Bambu PLA-CF @base.json"
-        },
         {
             "name": "Generic SBS @base",
             "sub_path": "filament/Generic SBS @base.json"
         },
+        {
+            "name": "Bambu PLA-CF @base",
+            "sub_path": "filament/Bambu PLA-CF @base.json"
+        },
         {
             "name": "Bambu Support For PLA @base",
             "sub_path": "filament/Bambu Support For PLA @base.json"
@@ -1405,10 +1405,6 @@
             "name": "Generic PLA @BBL A1M",
             "sub_path": "filament/Generic PLA @BBL A1M.json"
         },
-        {
-            "name": "Generic SBS",
-            "sub_path": "filament/Generic SBS.json"
-        },
         {
             "name": "Generic PLA @BBL A1M 0.2 nozzle",
             "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json"
@@ -1453,6 +1449,10 @@
             "name": "Generic PLA-CF @BBL A1",
             "sub_path": "filament/Generic PLA-CF @BBL A1.json"
         },
+        {
+            "name": "Generic SBS",
+            "sub_path": "filament/Generic SBS.json"
+        },
         {
             "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle",
             "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json"

From 57c0297a5f6dd69566a69ba20b1a1be7bb8d5557 Mon Sep 17 00:00:00 2001
From: Adam Johnston <adam.johnston00@gmail.com>
Date: Fri, 13 Dec 2024 19:17:20 -0800
Subject: [PATCH 30/59] Fix some broken assertions (#7716)

Fix broken asserts
---
 src/libslic3r/Algorithm/LineSplit.cpp | 2 +-
 src/libslic3r/Model.cpp               | 2 +-
 src/libslic3r/PrintConfig.cpp         | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/src/libslic3r/Algorithm/LineSplit.cpp b/src/libslic3r/Algorithm/LineSplit.cpp
index c532e08349f..f63033c0261 100644
--- a/src/libslic3r/Algorithm/LineSplit.cpp
+++ b/src/libslic3r/Algorithm/LineSplit.cpp
@@ -264,7 +264,7 @@ SplittedLine do_split_line(const ClipperZUtils::ZPath& path, const ExPolygons& c
             }
             for (const auto segment : node) {
                 for (const ClipperZUtils::ZPoint& sp : *segment) {
-                    assert(!is_clip(sp.z()));
+                    assert(!is_clip(sp));
                     result.emplace_back(to_point(sp), true, sp.z());
                 }
                 result.back().clipped = false; // Mark the end of the clipped line
diff --git a/src/libslic3r/Model.cpp b/src/libslic3r/Model.cpp
index fe8ff61018a..d1e6d9b3bfc 100644
--- a/src/libslic3r/Model.cpp
+++ b/src/libslic3r/Model.cpp
@@ -2785,7 +2785,7 @@ std::vector<size_t> ModelVolume::get_extruders_from_multi_material_painting() co
      if (!this->is_mm_painted())
          return {};
 
-     assert(static_cast<size_t>(TriangleStateType::Extruder1) - 1 == 0);
+     assert(static_cast<size_t>(EnforcerBlockerType::Extruder1) - 1 == 0);
      const TriangleSelector::TriangleSplittingData &data = this->mmu_segmentation_facets.get_data();
 
      std::vector<size_t> extruders;
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 3352b74e823..31c9a7a7f83 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -5476,9 +5476,9 @@ void PrintConfigDef::init_extruder_option_keys()
         "retract_lift_above",
         "retract_lift_below",
         "retract_lift_enforce",
+        "retract_on_top_layer",
         "retract_restart_extra",
         "retract_when_changing_layer",
-        "retract_on_top_layer",
         "retraction_distances_when_cut",
         "retraction_length",
         "retraction_minimum_travel",

From 19b1bae2f85c50cb0f5ea99652c0d6ddab9283ab Mon Sep 17 00:00:00 2001
From: Franz Schwartau <franz@electromail.org>
Date: Sat, 14 Dec 2024 04:18:13 +0100
Subject: [PATCH 31/59] fix: Don't exit if libgtk is not found (#7711)

---
 linux.d/debian | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/linux.d/debian b/linux.d/debian
index 796f2ab1005..1c299cba312 100644
--- a/linux.d/debian
+++ b/linux.d/debian
@@ -1,4 +1,4 @@
-FOUND_GTK3=$(dpkg -l libgtk* | grep gtk-3)
+FOUND_GTK3=$(dpkg -l libgtk* | grep gtk-3 || echo '')
 
 REQUIRED_DEV_PACKAGES=(
     autoconf

From 24262c261665e89c941b0d21c7948f2a0a76e47e Mon Sep 17 00:00:00 2001
From: Franz Schwartau <franz@electromail.org>
Date: Sat, 14 Dec 2024 04:19:09 +0100
Subject: [PATCH 32/59] fix: allow build on Fedora >= 40 (#7710)

---
 CMakeLists.txt | 4 ++++
 linux.d/fedora | 1 +
 2 files changed, 5 insertions(+)

diff --git a/CMakeLists.txt b/CMakeLists.txt
index 197694e0208..47a4fba3cb9 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -302,6 +302,10 @@ if (NOT MSVC AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMP
         add_compile_options(-gz=zstd)
     endif()
 
+    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 14)
+        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=template-id-cdtor" )
+    endif()
+
 endif()
 
 if (SLIC3R_ASAN)
diff --git a/linux.d/fedora b/linux.d/fedora
index 3a34072891e..47086053ba5 100644
--- a/linux.d/fedora
+++ b/linux.d/fedora
@@ -16,6 +16,7 @@ REQUIRED_DEV_PACKAGES=(
     gstreamermm-devel
     gtk3-devel
     libmspack-devel
+    libquadmath-devel
     libsecret-devel
     libtool
     m4

From b9b66c0e6e63c754308f76a9f67fb0ee04010457 Mon Sep 17 00:00:00 2001
From: f0x52 <f0x@cthu.lu>
Date: Sat, 14 Dec 2024 07:16:24 +0100
Subject: [PATCH 33/59] [feature] Add Bambu Cool Plate SuperTack (#7670)

* ENH: add supertrack plate

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I89017c9933597ee035aa20ba3852db6f629f5e20
(cherry picked from commit 78572cbff864e5e78255f2e0eb6e40237bc0bab9)

* NEW:add SuperTack svg

jira: none
Change-Id: Id6153f76f8634d1f00485991b75cbe526fb64adc
(cherry picked from commit 6404f06e79d38ffa8f7f296b10af2af1c2a3974d)

---------

Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
---
 resources/images/bbl_bed_st_bottom.svg | 22 +++++++++++++++++
 resources/images/bbl_bed_st_left.svg   | 34 ++++++++++++++++++++++++++
 src/libslic3r/GCode.cpp                |  3 +++
 src/libslic3r/Preset.cpp               |  2 +-
 src/libslic3r/Print.cpp                |  3 +++
 src/libslic3r/PrintConfig.cpp          | 25 ++++++++++++++++++-
 src/libslic3r/PrintConfig.hpp          | 12 +++++++++
 src/slic3r/GUI/PartPlate.cpp           |  6 ++++-
 src/slic3r/GUI/Tab.cpp                 | 13 +++++++++-
 9 files changed, 116 insertions(+), 4 deletions(-)
 create mode 100644 resources/images/bbl_bed_st_bottom.svg
 create mode 100644 resources/images/bbl_bed_st_left.svg

diff --git a/resources/images/bbl_bed_st_bottom.svg b/resources/images/bbl_bed_st_bottom.svg
new file mode 100644
index 00000000000..68c0c0f5947
--- /dev/null
+++ b/resources/images/bbl_bed_st_bottom.svg
@@ -0,0 +1,22 @@
+<svg width="416" height="36" viewBox="0 0 416 36" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M415.56 5.52499H0V6.51499H415.56V5.52499Z" fill="#CED1D2"/>
+<path d="M106.48 17.235H102.41C102.23 17.235 102.09 17.395 102.09 17.575V20.025H106.81V17.575C106.81 17.395 106.67 17.235 106.48 17.235Z" fill="#CED1D2"/>
+<path d="M90.43 17.235H86.06V20.655H90.44C90.62 20.655 90.77 20.515 90.77 20.325V17.555C90.77 17.375 90.61 17.225 90.43 17.225V17.235Z" fill="#CED1D2"/>
+<path d="M370.97 19.775H368.47V21.165H370.97V19.775Z" fill="#CED1D2"/>
+<path d="M324.1 21.875H321V23.605H324.1V21.875Z" fill="#CED1D2"/>
+<path d="M312.48 17.805H308.52V20.905H312.49C312.65 20.905 312.78 20.775 312.78 20.615V18.105C312.78 17.935 312.64 17.815 312.47 17.815H312.48V17.805Z" fill="#CED1D2"/>
+<path d="M387.3 21.675H384.78V23.085H387.3V21.675Z" fill="#CED1D2"/>
+<path d="M336.4 19.545H333.32V21.255H336.4V19.545Z" fill="#CED1D2"/>
+<path d="M365.13 19.775H362.61V23.085H365.13V19.775Z" fill="#CED1D2"/>
+<path d="M413.95 10.635H39.71C38.82 10.635 38.1 11.355 38.1 12.245V28.865C38.1 29.755 38.82 30.475 39.71 30.475H413.95C414.84 30.475 415.56 29.755 415.56 28.865V12.245C415.56 11.355 414.84 10.635 413.95 10.635ZM48.89 28.345H43.33V23.455L48.89 21.265V28.345ZM43.33 22.525V12.755H48.89V20.335L43.33 22.525ZM55.31 28.345H49.75V18.575L55.31 20.765V28.345ZM49.75 17.635V12.745H55.31V19.825L49.75 17.635ZM76.47 28.335H60.89V12.755H76.47V28.335ZM92.57 20.785C92.57 21.405 92.06 21.915 91.44 21.915H86.06V24.765H84.25V15.975H91.44C92.06 15.975 92.57 16.485 92.57 17.105V20.785ZM99.24 24.765H94.74C94.12 24.765 93.61 24.245 93.61 23.625V15.985H95.42V23.175C95.42 23.355 95.56 23.495 95.74 23.495H99.24V24.765ZM108.62 24.765H106.81V21.295H102.09V24.765H100.28V17.105C100.28 16.485 100.79 15.975 101.41 15.975H107.48C108.1 15.975 108.61 16.485 108.61 17.105V24.765H108.62ZM111.62 24.765H110.57L113.11 15.975H114.16L111.62 24.765ZM124.3 20.865C124.3 21.475 123.8 21.975 123.19 21.975H117.89V24.785H116.11V16.125H123.19C123.8 16.125 124.3 16.625 124.3 17.235V20.865ZM131.95 17.375H127.43C127.26 17.375 127.11 17.525 127.11 17.705V19.695H131.95V20.955H127.43C127.26 20.955 127.11 21.095 127.11 21.275V23.545H131.95V24.805H125.33V16.145H131.95V17.385V17.375ZM140.64 17.375H137.71V24.795H135.92V17.375H132.99V16.135H140.65V17.375H140.64ZM148.92 23.675C148.92 24.285 148.42 24.785 147.81 24.785H142.53C141.91 24.785 141.42 24.285 141.42 23.675V17.105C141.42 16.505 141.92 16.005 142.53 16.005H148.63V17.235H143.51C143.33 17.235 143.19 17.375 143.19 17.555V23.235C143.19 23.415 143.33 23.555 143.51 23.555H146.85C147.02 23.555 147.16 23.415 147.16 23.235V20.805H145.29V19.575H148.93V23.685L148.92 23.675ZM242.77 23.665C242.77 24.235 242.31 24.685 241.76 24.685H235.33V16.835H241.34C241.89 16.835 242.35 17.285 242.35 17.845V20.165L242.4 20.215C242.65 20.405 242.78 20.695 242.78 21.005V23.655L242.77 23.665ZM250.08 24.685H244.75C244.17 24.685 243.7 24.215 243.7 23.635V21.965C243.7 21.385 244.17 20.915 244.75 20.915H248.44V19.595H244.21V18.585H248.63C249.43 18.585 250.08 19.105 250.08 19.735V24.685ZM259.68 24.685H258.03V19.595H256.17V24.685H254.53V19.605H252.67V24.685H251.02V18.585H258.63C259.21 18.585 259.68 19.055 259.68 19.635V24.685ZM266.9 23.635C266.9 24.215 266.43 24.685 265.84 24.685H260.52V16.725H262.17V18.585H265.84C266.43 18.585 266.9 19.055 266.9 19.635V23.635ZM273.89 24.685H268.74C268.17 24.685 267.72 24.225 267.72 23.665V18.585H269.31V23.705H272.31V18.585H273.89V24.685ZM284.42 17.815H280.29C280.12 17.815 280 17.945 280 18.105V23.155C280 23.325 280.13 23.445 280.29 23.445H284.42V24.615H279.38C278.81 24.615 278.36 24.145 278.36 23.575V17.675C278.36 17.105 278.82 16.655 279.38 16.655H284.42V17.805V17.815ZM291.53 23.595C291.53 24.165 291.07 24.615 290.52 24.615H286.37C285.8 24.615 285.36 24.155 285.36 23.595V19.535C285.36 18.965 285.81 18.525 286.37 18.525H290.52C291.07 18.525 291.53 18.975 291.53 19.535V23.595ZM298.53 23.595C298.53 24.165 298.07 24.615 297.52 24.615H293.37C292.8 24.615 292.36 24.155 292.36 23.595V19.535C292.36 18.965 292.81 18.525 293.37 18.525H297.52C298.07 18.525 298.53 18.975 298.53 19.535V23.595ZM302.64 24.625H300.4C299.82 24.625 299.35 24.155 299.35 23.565V16.665H300.99V23.605H302.64V24.625ZM314.42 21.015C314.42 21.585 313.96 22.035 313.39 22.035H308.51V24.615H306.87V16.655H313.38C313.95 16.655 314.41 17.115 314.41 17.675V21.005H314.42V21.015ZM318.65 24.625H316.41C315.83 24.625 315.36 24.155 315.36 23.565V16.665H317V23.605H318.65V24.625ZM325.73 24.625H320.4C319.82 24.625 319.35 24.155 319.35 23.575V21.905C319.35 21.325 319.82 20.855 320.4 20.855H324.09V19.535H319.86V18.525H324.28C325.08 18.525 325.73 19.045 325.73 19.675V24.625ZM330.87 19.545H329.6V23.205C329.6 23.415 329.79 23.595 330 23.595H330.87V24.615H329.01C328.43 24.615 327.96 24.145 327.96 23.565V19.535H326.68V18.525H327.96V16.655H329.6V18.525H330.87V19.535V19.545ZM338.03 22.265H333.32V23.615H337.93V24.615H332.73C332.15 24.615 331.69 24.145 331.69 23.565V19.595C331.69 19.015 332.15 18.545 332.73 18.545H336.98C337.56 18.545 338.03 19.015 338.03 19.595V22.255V22.265ZM345 24.645H344.03L341.19 20.745L344.03 16.845H345L342.16 20.745L345 24.645ZM354.81 23.065C354.81 23.525 354.43 23.905 353.98 23.905H348.88V22.965H353.24C353.36 22.965 353.49 22.835 353.49 22.685V21.485C353.49 21.355 353.37 21.245 353.23 21.245H349.49C349.04 21.225 348.66 20.855 348.66 20.405V18.255C348.66 17.795 349.04 17.425 349.51 17.425H354.59V18.355H350.25C350.12 18.355 350.01 18.465 350.01 18.605V20.075C350.01 20.205 350.12 20.315 350.25 20.315H353.97C354.43 20.315 354.8 20.695 354.8 21.155V23.065H354.81ZM360.6 23.915H356.41C355.95 23.915 355.58 23.545 355.58 23.085V18.945H356.88V23.115H359.33V18.945H360.62V23.915H360.6ZM366.48 23.055C366.48 23.525 366.1 23.905 365.62 23.905H362.62V25.765H361.29V18.935H365.63C366.11 18.935 366.49 19.315 366.49 19.785V23.045L366.48 23.055ZM372.31 21.995H368.47V23.095H372.22V23.915H367.99C367.52 23.915 367.15 23.535 367.15 23.065V19.835C367.15 19.365 367.52 18.985 367.99 18.985H371.45C371.92 18.985 372.3 19.365 372.3 19.835V22.005H372.31V21.995ZM376.46 20.275H374.32V23.915H372.99V18.955H374.32V19.855L374.53 19.545C374.78 19.175 375.21 18.945 375.66 18.945H376.46V20.275ZM382.87 18.355H380.67V23.915H379.33V18.355H377.13V17.425H382.87V18.355ZM388.64 23.915H384.3C383.83 23.915 383.45 23.535 383.45 23.065V21.705C383.45 21.235 383.83 20.855 384.3 20.855H387.3V19.775H383.85V18.945H387.45C388.1 18.945 388.63 19.365 388.63 19.885V23.915H388.64ZM394.46 19.765H390.74V23.085H394.46V23.915H390.26C389.79 23.915 389.41 23.535 389.41 23.065V19.805C389.41 19.335 389.79 18.955 390.26 18.955H394.46V19.785V19.765ZM398.96 23.905L398.1 21.385H396.47V23.915H395.14V17.425H396.47V20.635H398.03L398.79 18.945H400.07L399.21 20.925L399.19 20.965L400.21 23.915H398.96V23.905ZM403.58 24.645H402.61L405.45 20.745L402.61 16.845H403.58L406.42 20.745L403.58 24.645Z" fill="#CED1D2"/>
+<path d="M296.94 19.495H293.94V23.625H296.94V19.495Z" fill="#CED1D2"/>
+<path d="M289.94 19.495H286.94V23.625H289.94V19.495Z" fill="#CED1D2"/>
+<path d="M265.25 19.595H262.16V23.655H265.25V19.595Z" fill="#CED1D2"/>
+<path d="M240.86 21.325H236.95V23.535H240.86C241.03 23.535 241.15 23.405 241.15 23.245V21.605C241.15 21.455 241.02 21.325 240.86 21.325Z" fill="#CED1D2"/>
+<path d="M248.45 21.945H245.35V23.675H248.45V21.945Z" fill="#CED1D2"/>
+<path d="M240.73 19.905V18.265C240.73 18.095 240.59 17.975 240.44 17.975H236.95V20.205H240.44C240.59 20.205 240.73 20.075 240.73 19.915V19.905Z" fill="#CED1D2"/>
+<path d="M122.19 17.375H117.89V20.745H122.21C122.39 20.745 122.53 20.605 122.53 20.425V17.695C122.53 17.515 122.38 17.375 122.2 17.375H122.19Z" fill="#CED1D2"/>
+<path d="M71.28 17.945V20.545H68.68V25.735H71.28V23.135H73.88V15.345H68.68V17.945H71.28Z" fill="#CED1D2"/>
+<path d="M66.09 20.545H68.68V17.945H66.09V20.545Z" fill="#CED1D2"/>
+<path d="M66.09 17.945V15.345H63.49V17.945H66.09Z" fill="#CED1D2"/>
+</svg>
diff --git a/resources/images/bbl_bed_st_left.svg b/resources/images/bbl_bed_st_left.svg
new file mode 100644
index 00000000000..4a7c10acbe2
--- /dev/null
+++ b/resources/images/bbl_bed_st_left.svg
@@ -0,0 +1,34 @@
+<svg width="31" height="507" viewBox="0 0 31 507" fill="none" xmlns="http://www.w3.org/2000/svg">
+<g clip-path="url(#clip0_1_421)">
+<path d="M23.9769 127.531H6.49071C4.80136 127.531 3.40839 128.894 3.40839 130.554V145.491H6.87599V133.251C6.87599 132.747 7.26128 132.392 7.73549 132.392H22.7025C23.1767 132.392 23.562 132.777 23.562 133.251V145.491H27V130.554C27 128.865 25.6366 127.531 23.9769 127.531Z" fill="#B3B3B3"/>
+<path d="M21.4872 163.6V151.3C21.4872 149.611 20.1535 148.307 18.4938 148.307H6.46091C4.77156 148.307 3.43787 149.641 3.43787 151.3V163.6C3.43787 165.23 4.8012 166.593 6.46091 166.593H18.4938C20.1832 166.593 21.4872 165.23 21.4872 163.6ZM6.34236 161.881V152.99H18.5827V161.881H6.34236Z" fill="#B3B3B3"/>
+<path d="M21.4872 184.317V172.017C21.4872 170.328 20.1535 169.024 18.4938 169.024H6.46091C4.77156 169.024 3.43787 170.357 3.43787 172.017V184.317C3.43787 185.947 4.8012 187.31 6.46091 187.31H18.4938C20.1832 187.31 21.4872 185.947 21.4872 184.317ZM6.34236 182.627V173.736H18.5827V182.627H6.34236Z" fill="#B3B3B3"/>
+<path d="M27 194.631V189.77H6.54998C4.80136 189.77 3.40839 191.163 3.40839 192.882V199.521H6.43143V194.631H27Z" fill="#B3B3B3"/>
+<path d="M27 231.381V212.087H3.40839V216.948H11.0549V231.411C11.0549 233.1 12.4182 234.464 14.078 234.464H23.9769C25.6663 234.464 27 233.1 27 231.411V231.381ZM15.2931 229.574C14.7893 229.574 14.4336 229.188 14.4336 228.714V216.948H23.6213V228.684C23.6213 229.159 23.236 229.603 22.7618 229.603H15.2931V229.574Z" fill="#B3B3B3"/>
+<path d="M27 242.081V237.22H6.54998C4.80136 237.22 3.40839 238.613 3.40839 240.332V246.971H6.43143V242.081H27Z" fill="#B3B3B3"/>
+<path d="M21.4874 263.657V250.557H18.494V263.094H14.5818V252.157C14.5818 250.438 13.1888 249.045 11.4698 249.045H6.52034C4.80136 249.045 3.40839 250.438 3.40839 252.157V267.954H18.0494C19.9462 267.954 21.4577 266.028 21.4577 263.657H21.4874ZM6.40179 263.094V253.906H11.5291V263.094H6.40179Z" fill="#B3B3B3"/>
+<path d="M27 279.394V274.534H21.4577V270.74H18.4643V274.534H6.52034C4.80136 274.534 3.40839 275.927 3.40839 277.646V283.158H6.43143V280.58C6.43143 279.958 6.96491 279.394 7.5873 279.394H18.4347V283.158H21.4281V279.394H27Z" fill="#B3B3B3"/>
+<path d="M21.3688 301.297V288.701C21.3688 286.982 19.9758 285.618 18.2568 285.618H6.49065C4.77166 285.618 3.37869 286.982 3.37869 288.701V304.112H6.34246V290.449H10.3435V304.409H18.2272C19.9462 304.409 21.3391 303.016 21.3391 301.297H21.3688ZM13.3962 299.548V290.42H18.4643V299.548H13.3962Z" fill="#B3B3B3"/>
+<path d="M16.5971 20.8057H23.4731C25.1624 20.8057 26.4665 19.4423 26.4665 17.8122V0H3.2009V19.057C3.2009 20.6871 4.56423 22.0504 6.22394 22.0504H14.0779C14.9967 22.0504 15.8562 21.6651 16.4193 20.9242L16.5675 20.776L16.5971 20.8057ZM23.1174 4.83094V15.1745C23.1174 15.6191 22.7321 16.034 22.2579 16.034H17.3973C16.9231 16.034 16.5379 15.6191 16.5379 15.1745V4.83094H23.1174ZM7.46872 17.2788C6.96488 17.2788 6.60923 16.8935 6.60923 16.4193V4.83094H13.1592V16.4193C13.1592 16.9231 12.7739 17.2788 12.3293 17.2788H7.46872Z" fill="#B3B3B3"/>
+<path d="M21.3096 39.4478V26.3479H18.3162V38.8846H14.404V27.9483C14.404 26.2294 13.011 24.8364 11.292 24.8364H6.34255C4.62356 24.8364 3.23059 26.2294 3.23059 27.9483V43.7452H17.8716C19.7684 43.7452 21.2799 41.8188 21.2799 39.4478H21.3096ZM6.224 38.8846V29.697H11.3513V38.8846H6.224Z" fill="#B3B3B3"/>
+<path d="M21.3095 69.0854V46.5311H3.23053V51.4214H18.2568V56.934H3.2009V61.7946H18.2865V67.3072H3.2009V72.1974H18.1976C19.9166 72.1974 21.3095 70.8044 21.3095 69.0854Z" fill="#B3B3B3"/>
+<path d="M21.3096 90.4246V79.5476H26.8222V74.6573H3.23059V90.4246C3.23059 92.1732 4.62356 93.5662 6.34255 93.5662H18.1976C19.9166 93.5662 21.3096 92.1732 21.3096 90.4246ZM6.25363 88.676V79.5179H18.2865V88.676H6.25363Z" fill="#B3B3B3"/>
+<path d="M6.10545 109.63V100.738H21.3096V96.0261H6.25363C4.56429 96.0261 3.23059 97.3894 3.23059 99.0491V114.313H21.3096V109.63H6.10545Z" fill="#B3B3B3"/>
+<path d="M26.4665 322.162L14.9078 313.745L3.34906 322.162V325.066L14.9078 316.619L26.4665 325.066V322.162Z" fill="#B3B3B3"/>
+<path d="M26.4665 498.654V495.779L14.9078 504.196L3.34906 495.779V498.654L14.9078 507.071L26.4665 498.654Z" fill="#B3B3B3"/>
+<path d="M16.1821 351.651V340.626C16.1821 340.241 16.5081 339.915 16.8934 339.915H21.2502C21.6355 339.915 21.9911 340.241 21.9911 340.626V353.489H24.7474V338.433C24.7474 337.04 23.6508 335.914 22.2875 335.914H15.9154C14.5817 335.914 13.4555 337.01 13.4555 338.373V349.458C13.4555 349.843 13.0998 350.229 12.7145 350.229H9.158C8.74308 350.229 8.32815 349.873 8.32815 349.488V336.566H5.54221V351.681C5.54221 353.044 6.66844 354.141 8.03177 354.141H13.6926C15.0559 354.141 16.1821 353.014 16.1821 351.681V351.651Z" fill="#B3B3B3"/>
+<path d="M7.85389 367.478V360.216H20.2424V356.363H7.97244C6.60911 356.363 5.51251 357.46 5.51251 358.823V371.242H20.2424V367.418H7.88353V367.478H7.85389Z" fill="#B3B3B3"/>
+<path d="M20.2425 386.149V373.287H-3.05176e-05V377.228H5.51258V386.12C5.51258 387.542 6.63881 388.669 8.03178 388.669H17.6937C19.0866 388.669 20.2129 387.542 20.2129 386.12L20.2425 386.149ZM7.94287 384.727V377.258H17.7529V384.727H7.94287Z" fill="#B3B3B3"/>
+<path d="M20.1536 403.458V393.203C20.1536 391.81 19.0274 390.714 17.6344 390.714H8.06141C6.66844 390.714 5.54221 391.81 5.54221 393.203V405.74H7.9725V394.626H11.2326V406.007H17.664C19.057 406.007 20.1832 404.88 20.1832 403.487L20.1536 403.458ZM13.6333 402.035V394.626H17.7529V402.035H13.6333Z" fill="#B3B3B3"/>
+<path d="M18.4642 412.557L17.5454 411.934H20.2128V407.992H5.51251V411.934H16.3006V418.277H20.2424V415.906C20.2424 414.572 19.5608 413.297 18.4642 412.557Z" fill="#B3B3B3"/>
+<path d="M21.9614 420.262V426.783H5.51251V430.784H21.9614V437.274H24.7474V420.262H21.9614Z" fill="#B3B3B3"/>
+<path d="M20.2424 450.878V440.209H17.7825V450.434H14.5816V441.542C14.5816 440.149 13.4554 439.023 12.0624 439.023H8.03172C6.63874 439.023 5.51251 440.149 5.51251 441.542V454.405H17.4565C18.9977 454.405 20.2424 452.834 20.2424 450.908V450.878ZM7.9428 450.434V442.965H12.1217V450.434H7.9428Z" fill="#B3B3B3"/>
+<path d="M17.7233 456.657H8.06141C6.66844 456.657 5.54221 457.784 5.54221 459.177V471.625H8.00213V460.599H17.8418V471.625H20.3018V459.177C20.3018 457.784 19.1755 456.657 17.7826 456.657H17.7233Z" fill="#B3B3B3"/>
+<path d="M14.3742 485.702L20.2424 488.251V484.458L15.204 482.235V477.582H24.7474V473.64H5.51251V477.582H13.0108V482.413L5.54215 484.991V488.666L14.2556 485.643L14.3742 485.702Z" fill="#B3B3B3"/>
+</g>
+<defs>
+<clipPath id="clip0_1_421">
+<rect width="31" height="507" fill="white"/>
+</clipPath>
+</defs>
+</svg>
diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index 2a7e494db9a..8f4492d341d 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -1792,6 +1792,7 @@ enum BambuBedType {
     bbtEngineeringPlate = 2,
     bbtHighTemperaturePlate = 3,
     bbtTexturedPEIPlate         = 4,
+    bbtSuperTackPlate = 5,
 };
 
 static BambuBedType to_bambu_bed_type(BedType type)
@@ -1807,6 +1808,8 @@ static BambuBedType to_bambu_bed_type(BedType type)
         bambu_bed_type = bbtTexturedPEIPlate;
     else if (type == btPCT)
         bambu_bed_type = bbtCoolPlate;
+    else if (type == btSuperTack)
+        bambu_bed_type = bbtSuperTackPlate;
 
     return bambu_bed_type;
 }
diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index a9a89e84b77..5fe32addbaf 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -828,7 +828,7 @@ static std::vector<std::string> s_Preset_filament_options {
     "multi_zone_7_initial_layer", "multi_zone_7_temperature", "multi_zone_8_initial_layer", "multi_zone_8_temperature",
     "multi_zone_9_initial_layer", "multi_zone_9_temperature", "multi_zone_10_initial_layer", "multi_zone_10_temperature",
     // BBS
-    "cool_plate_temp", "textured_cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "textured_cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer","textured_plate_temp_initial_layer",
+    "cool_plate_temp", "textured_cool_plate_temp", "eng_plate_temp", "hot_plate_temp", "textured_plate_temp", "cool_plate_temp_initial_layer", "textured_cool_plate_temp_initial_layer", "eng_plate_temp_initial_layer", "hot_plate_temp_initial_layer", "textured_plate_temp_initial_layer", "supertack_plate_temp_initial_layer", "supertack_plate_temp",
     // "bed_type",
     //BBS:temperature_vitrification
     "temperature_vitrification", "reduce_fan_stop_start_freq","dont_slow_down_outer_wall", "slow_down_for_layer_cooling", "fan_min_speed",
diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp
index c07eaa70ac7..e825498bf61 100644
--- a/src/libslic3r/Print.cpp
+++ b/src/libslic3r/Print.cpp
@@ -129,6 +129,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
         "sparse_infill_acceleration",
         "internal_solid_infill_acceleration",
         // BBS
+        "supertack_plate_temp_initial_layer",
         "cool_plate_temp_initial_layer",
         "textured_cool_plate_temp_initial_layer",
         "eng_plate_temp_initial_layer",
@@ -270,6 +271,8 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n
             || opt_key == "gcode_flavor"
             || opt_key == "single_extruder_multi_material"
             || opt_key == "nozzle_temperature"
+            // BBS
+            || opt_key == "supertack_plate_temp"
             || opt_key == "cool_plate_temp"
             || opt_key == "textured_cool_plate_temp"
             || opt_key == "eng_plate_temp"
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 31c9a7a7f83..1a784e01327 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -350,6 +350,7 @@ CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(OverhangFanThreshold)
 // BBS
 static const t_config_enum_values s_keys_map_BedType = {
     { "Default Plate",      btDefault },
+    { "Supertack Plate",    btSuperTack },
     { "Cool Plate",         btPC },
     { "Engineering Plate",  btEP  },
     { "High Temp Plate",    btPEI  },
@@ -657,6 +658,16 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionFloatOrPercent(0., false));
 
     // BBS
+    def             = this->add("supertack_plate_temp", coInts);
+    def->label      = L("Other layers");
+    def->tooltip    = L("Bed temperature for layers except the initial one. "
+                     "Value 0 means the filament does not support to print on the Cool Plate");
+    def->sidetext   = "°C";
+    def->full_label = L("Bed temperature");
+    def->min        = 0;
+    def->max        = 120;
+    def->set_default_value(new ConfigOptionInts{35});
+
     def = this->add("cool_plate_temp", coInts);
     def->label = L("Other layers");
     def->tooltip = L("Bed temperature for layers except the initial one. "
@@ -707,6 +718,16 @@ void PrintConfigDef::init_fff_params()
     def->max        = 300;
     def->set_default_value(new ConfigOptionInts{45});
 
+    def = this->add("supertack_plate_temp_initial_layer", coInts);
+    def->label = L("Initial layer");
+    def->full_label = L("Initial layer bed temperature");
+    def->tooltip = L("Bed temperature of the initial layer. "
+        "Value 0 means the filament does not support to print on the Bambu Cool Plate SuperTack");
+    def->sidetext = "°C";
+    def->min = 0;
+    def->max = 120;
+    def->set_default_value(new ConfigOptionInts{ 35 });
+
     def = this->add("cool_plate_temp_initial_layer", coInts);
     def->label = L("Initial layer");
     def->full_label = L("Initial layer bed temperature");
@@ -762,12 +783,14 @@ void PrintConfigDef::init_fff_params()
     def->mode = comSimple;
     def->enum_keys_map = &s_keys_map_BedType;
     // Orca: make sure the order of the values is the same as the BedType enum 
+    def->enum_values.emplace_back("Supertack Plate");
     def->enum_values.emplace_back("Cool Plate");
     def->enum_values.emplace_back("Engineering Plate");
     def->enum_values.emplace_back("High Temp Plate");
     def->enum_values.emplace_back("Textured PEI Plate");
     def->enum_values.emplace_back("Textured Cool Plate");
-    def->enum_labels.emplace_back(L("Smooth Cool Plate"));
+    def->enum_labels.emplace_back(L("Bambu Cool Plate SuperTack"));
+    def->enum_labels.emplace_back(L("Smooth Cool Plate / PLA Plate"));
     def->enum_labels.emplace_back(L("Engineering Plate"));
     def->enum_labels.emplace_back(L("Smooth High Temp Plate"));
     def->enum_labels.emplace_back(L("Textured PEI Plate"));
diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index d63ba72d9d7..cdf9b62b036 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -254,6 +254,7 @@ enum OverhangFanThreshold {
 // BBS
 enum BedType {
     btDefault = 0,
+    btSuperTack,
     btPC,
     btEP,
     btPEI,
@@ -322,6 +323,9 @@ static std::string bed_type_to_gcode_string(const BedType type)
     std::string type_str;
 
     switch (type) {
+    case btSuperTack:
+        type_str = "supertack_plate";
+        break;
     case btPC:
         type_str = "cool_plate";
         break;
@@ -347,6 +351,9 @@ static std::string bed_type_to_gcode_string(const BedType type)
 
 static std::string get_bed_temp_key(const BedType type)
 {
+    if (type == btSuperTack)
+        return "supertack_plate_temp";
+
     if (type == btPC)
         return "cool_plate_temp";
 
@@ -367,6 +374,9 @@ static std::string get_bed_temp_key(const BedType type)
 
 static std::string get_bed_temp_1st_layer_key(const BedType type)
 {
+    if (type == btSuperTack)
+        return "supertack_plate_temp_initial_layer";
+
     if (type == btPC)
         return "cool_plate_temp_initial_layer";
 
@@ -1183,9 +1193,11 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE(
     ((ConfigOptionEnum<BedType>,      curr_bed_type))
     ((ConfigOptionInts,               cool_plate_temp))
     ((ConfigOptionInts,               textured_cool_plate_temp))
+    ((ConfigOptionInts,               supertack_plate_temp))
     ((ConfigOptionInts,               eng_plate_temp))
     ((ConfigOptionInts,               hot_plate_temp)) // hot is short for high temperature
     ((ConfigOptionInts,               textured_plate_temp))
+    ((ConfigOptionInts,               supertack_plate_temp_initial_layer))
     ((ConfigOptionInts,               cool_plate_temp_initial_layer))
     ((ConfigOptionInts,               textured_cool_plate_temp_initial_layer))
     ((ConfigOptionInts,               eng_plate_temp_initial_layer))
diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp
index db8b4856a52..1f052706c98 100644
--- a/src/slic3r/GUI/PartPlate.cpp
+++ b/src/slic3r/GUI/PartPlate.cpp
@@ -5499,7 +5499,9 @@ void PartPlateList::BedTextureInfo::reset()
 void PartPlateList::init_bed_type_info()
 {
 	BedTextureInfo::TexturePart pct_part_left(10, 130,  10, 110, "orca_bed_pct_left.svg");
-	BedTextureInfo::TexturePart pc_part1(10, 130,  10, 110, "bbl_bed_pc_left.svg");
+  BedTextureInfo::TexturePart st_part1(9, 70, 12.5, 170, "bbl_bed_st_left.svg");
+  BedTextureInfo::TexturePart st_part2(74, -10, 148, 12, "bbl_bed_st_bottom.svg");
+	BedTextureInfo::TexturePart pc_part1(10, 130, 10, 110, "bbl_bed_pc_left.svg");
 	BedTextureInfo::TexturePart pc_part2(74, -10, 148, 12, "bbl_bed_pc_bottom.svg");
 	BedTextureInfo::TexturePart ep_part1(7.5, 90, 12.5, 150, "bbl_bed_ep_left.svg");
 	BedTextureInfo::TexturePart ep_part2(74, -10, 148, 12, "bbl_bed_ep_bottom.svg");
@@ -5511,6 +5513,8 @@ void PartPlateList::init_bed_type_info()
 		bed_texture_info[i].reset();
 		bed_texture_info[i].parts.clear();
 	}
+    bed_texture_info[btSuperTack].parts.push_back(st_part1);
+    bed_texture_info[btSuperTack].parts.push_back(st_part2);
 	bed_texture_info[btPC].parts.push_back(pc_part1);
 	bed_texture_info[btPC].parts.push_back(pc_part2);
 	bed_texture_info[btPCT].parts.push_back(pct_part_left);
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 9daf1259750..fa170c38647 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3340,7 +3340,12 @@ void TabFilament::build()
         optgroup->append_line(line);
 
         optgroup = page->new_optgroup(L("Bed temperature"), L"param_bed_temp");
-        line = { L("Cool plate"), L("Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Cool Plate") };
+        line = {L("Bambu Cool Plate SuperTack"), L("Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Bambu Cool Plate SuperTack")};
+        line.append_option(optgroup->get_option("supertack_plate_temp_initial_layer"));
+        line.append_option(optgroup->get_option("supertack_plate_temp"));
+        optgroup->append_line(line);
+
+        line = { L("Cool Plate / PLA Plate"), L("Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Cool Plate") };
         line.append_option(optgroup->get_option("cool_plate_temp_initial_layer"));
         line.append_option(optgroup->get_option("cool_plate_temp"));
         optgroup->append_line(line);
@@ -3631,6 +3636,12 @@ void TabFilament::toggle_options()
         toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
 
+        bool support_chamber_temp_control = this->m_preset_bundle->printers.get_edited_preset().config.opt_bool("support_chamber_temp_control");
+        toggle_line("chamber_temperatures", support_chamber_temp_control);
+
+        for (auto el : {"supertack_plate_temp", "supertack_plate_temp_initial_layer", "cool_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp", "eng_plate_temp_initial_layer", "textured_plate_temp", "textured_plate_temp_initial_layer"})
+            toggle_line(el, is_BBL_printer);
+
         bool is_multi_zone = cfg.opt_bool("multi_zone");
         int  zone_count    = is_multi_zone ? cfg.opt_int("multi_zone_number") : 0;
 

From 2672b6a0c6e382f4f60d3b215acd479ba38f09e7 Mon Sep 17 00:00:00 2001
From: discip <53649486+discip@users.noreply.github.com>
Date: Sat, 14 Dec 2024 07:34:08 +0100
Subject: [PATCH 34/59] reordering and renaming certain menu items (#7573)

* reordered Z-Hop settings

* Update Tab.cpp

* Update PrintConfig.cpp

* reordering **`Compare presets`** to match the layout in the sidebar
---
 src/libslic3r/PrintConfig.cpp           |  4 ++--
 src/slic3r/GUI/Tab.cpp                  | 18 +++++++++---------
 src/slic3r/GUI/UnsavedChangesDialog.cpp |  8 ++++----
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 1a784e01327..4324426803b 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -3816,7 +3816,7 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionFloats { 10. });
 
     def = this->add("z_hop", coFloats);
-    def->label = L("Z hop when retract");
+    def->label = L("Z-hop height");
     def->tooltip = L("Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. "
                      "It prevents nozzle from hitting the print when travel move. "
                      "Using spiral line to lift z can prevent stringing");
@@ -3844,7 +3844,7 @@ void PrintConfigDef::init_fff_params()
 
 
     def = this->add("z_hop_types", coEnums);
-    def->label = L("Z hop type");
+    def->label = L("Z-hop type");
     def->tooltip = L("Z hop type");
     def->enum_keys_map = &ConfigOptionEnum<ZHopType>::get_enum_values();
     def->enum_values.push_back("Auto Lift");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index fa170c38647..4216e41ea1a 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -2123,19 +2123,19 @@ void TabPrint::build()
         optgroup->append_single_option_line("detect_thin_wall");
 
         optgroup = page->new_optgroup(L("Top/bottom shells"), L"param_shell");
-        optgroup->append_single_option_line("top_surface_pattern", "fill-patterns#Infill of the top surface and bottom surface");
         optgroup->append_single_option_line("top_shell_layers");
         optgroup->append_single_option_line("top_shell_thickness");
-        optgroup->append_single_option_line("bottom_surface_pattern", "fill-patterns#Infill of the top surface and bottom surface");
+        optgroup->append_single_option_line("top_surface_pattern", "fill-patterns#Infill of the top surface and bottom surface");
         optgroup->append_single_option_line("bottom_shell_layers");
         optgroup->append_single_option_line("bottom_shell_thickness");
+        optgroup->append_single_option_line("bottom_surface_pattern", "fill-patterns#Infill of the top surface and bottom surface");
         optgroup->append_single_option_line("top_bottom_infill_wall_overlap");
 
         optgroup = page->new_optgroup(L("Infill"), L"param_infill");
         optgroup->append_single_option_line("sparse_infill_density");
         optgroup->append_single_option_line("sparse_infill_pattern", "fill-patterns#infill types and their properties of sparse");
-        optgroup->append_single_option_line("infill_anchor");
         optgroup->append_single_option_line("infill_anchor_max");
+        optgroup->append_single_option_line("infill_anchor");
         optgroup->append_single_option_line("internal_solid_infill_pattern");
         optgroup->append_single_option_line("gap_fill_target");
         optgroup->append_single_option_line("filter_out_gap_fill");
@@ -2320,8 +2320,8 @@ void TabPrint::build()
 
 page = add_options_page(L("Others"), "custom-gcode_other"); // ORCA: icon only visible on placeholders
         optgroup = page->new_optgroup(L("Skirt"), L"param_skirt");
-        optgroup->append_single_option_line("skirt_type");
         optgroup->append_single_option_line("skirt_loops");
+        optgroup->append_single_option_line("skirt_type");
         optgroup->append_single_option_line("min_skirt_length");
         optgroup->append_single_option_line("skirt_distance");
         optgroup->append_single_option_line("skirt_start_angle");
@@ -4353,9 +4353,6 @@ if (is_marlin_flavor)
                 optgroup = page->new_optgroup(L("Retraction"), L"param_retraction");
                 optgroup->append_single_option_line("retraction_length", "", extruder_idx);
                 optgroup->append_single_option_line("retract_restart_extra", "", extruder_idx);
-                optgroup->append_single_option_line("z_hop", "", extruder_idx);
-                optgroup->append_single_option_line("z_hop_types", "", extruder_idx);
-                optgroup->append_single_option_line("travel_slope", "", extruder_idx);
                 optgroup->append_single_option_line("retraction_speed", "", extruder_idx);
                 optgroup->append_single_option_line("deretraction_speed", "", extruder_idx);
                 optgroup->append_single_option_line("retraction_minimum_travel", "", extruder_idx);
@@ -4365,10 +4362,13 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("wipe_distance", "", extruder_idx);
                 optgroup->append_single_option_line("retract_before_wipe", "", extruder_idx);
 
-                optgroup = page->new_optgroup(L("Lift Z Enforcement"), L"param_extruder_lift_enforcement");
+                optgroup = page->new_optgroup(L("Z-Hop"), L"param_extruder_lift_enforcement");
+                optgroup->append_single_option_line("retract_lift_enforce", "", extruder_idx);
+                optgroup->append_single_option_line("z_hop_types", "", extruder_idx);
+                optgroup->append_single_option_line("z_hop", "", extruder_idx);
+                optgroup->append_single_option_line("travel_slope", "", extruder_idx);
                 optgroup->append_single_option_line("retract_lift_above", "", extruder_idx);
                 optgroup->append_single_option_line("retract_lift_below", "", extruder_idx);
-                optgroup->append_single_option_line("retract_lift_enforce", "", extruder_idx);
 
                 optgroup = page->new_optgroup(L("Retraction when switching material"), L"param_retraction_material_change");
                 optgroup->append_single_option_line("retract_length_toolchange", "", extruder_idx);
diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp
index b47f3c0389c..a4797fdc279 100644
--- a/src/slic3r/GUI/UnsavedChangesDialog.cpp
+++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp
@@ -1822,11 +1822,11 @@ FullCompareDialog::FullCompareDialog(const wxString& option_name, const wxString
 static PresetCollection* get_preset_collection(Preset::Type type, PresetBundle* preset_bundle = nullptr) {
     if (!preset_bundle)
         preset_bundle = wxGetApp().preset_bundle;
-    return  type == Preset::Type::TYPE_PRINT        ? &preset_bundle->prints :
-            type == Preset::Type::TYPE_SLA_PRINT    ? &preset_bundle->sla_prints :
+    return  type == Preset::Type::TYPE_PRINTER      ? &preset_bundle->printers :
             type == Preset::Type::TYPE_FILAMENT     ? &preset_bundle->filaments :
             type == Preset::Type::TYPE_SLA_MATERIAL ? &preset_bundle->sla_materials :
-            type == Preset::Type::TYPE_PRINTER      ? &preset_bundle->printers :
+            type == Preset::Type::TYPE_PRINT        ? &preset_bundle->prints :
+            type == Preset::Type::TYPE_SLA_PRINT    ? &preset_bundle->sla_prints :
             nullptr;
 }
 
@@ -1842,7 +1842,7 @@ void DiffPresetDialog::create_presets_sizer()
 {
     m_presets_sizer = new wxBoxSizer(wxVERTICAL);
 
-    for (auto new_type : { Preset::TYPE_PRINT, Preset::TYPE_SLA_PRINT, Preset::TYPE_FILAMENT, Preset::TYPE_SLA_MATERIAL, Preset::TYPE_PRINTER })
+    for (auto new_type : { Preset::TYPE_PRINTER, Preset::TYPE_FILAMENT, Preset::TYPE_SLA_MATERIAL, Preset::TYPE_PRINT, Preset::TYPE_SLA_PRINT })
     {
         const PresetCollection* collection = get_preset_collection(new_type);
         wxBoxSizer* sizer = new wxBoxSizer(wxHORIZONTAL);

From f74400bc64d141efdd60af64f9dbdb69ff5ea610 Mon Sep 17 00:00:00 2001
From: xiaoyeliu <166936931+womendoushihaoyin@users.noreply.github.com>
Date: Sat, 14 Dec 2024 14:38:35 +0800
Subject: [PATCH 35/59] =?UTF-8?q?Fix:=20Switching=20between=20multi-extrud?=
 =?UTF-8?q?er=20printers=20using=20tabs=20can=20cause=20t=E2=80=A6=20(#748?=
 =?UTF-8?q?3)?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

fix: Switching between multi-extruder printers using tabs can cause the filament count to be incorrect.
---
 src/slic3r/GUI/Tab.cpp                  | 15 +++++++++++----
 src/slic3r/GUI/UnsavedChangesDialog.cpp | 12 +++++++-----
 2 files changed, 18 insertions(+), 9 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 4216e41ea1a..04f09f00b18 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -5139,8 +5139,14 @@ bool Tab::select_preset(std::string preset_name, bool delete_current /*=false*/,
 
         // Orca: update presets for the selected printer
         if (m_type == Preset::TYPE_PRINTER && wxGetApp().app_config->get_bool("remember_printer_config")) {
-          m_preset_bundle->update_selections(*wxGetApp().app_config);
-          wxGetApp().plater()->sidebar().on_filaments_change(m_preset_bundle->filament_presets.size());
+            m_preset_bundle->update_selections(*wxGetApp().app_config);
+            int extruders_count = m_preset_bundle->printers.get_edited_preset().config.opt<ConfigOptionFloats>("nozzle_diameter")->values.size();
+            if (extruders_count > 1) {
+                // multi tool
+                wxGetApp().plater()->sidebar().on_filaments_change(extruders_count);
+            } else {
+                wxGetApp().plater()->sidebar().on_filaments_change(m_preset_bundle->filament_presets.size());
+            }
         }
         load_current_preset();
 
@@ -6122,8 +6128,9 @@ void Page::update_visibility(ConfigOptionMode mode, bool update_contolls_visibil
 #ifdef __WXMSW__
     if (!m_show) return;
     // BBS: fix field control position
-    wxTheApp->CallAfter([this]() {
-        for (auto group : m_optgroups) {
+    auto groups = this->m_optgroups;
+    wxTheApp->CallAfter([groups]() {
+        for (auto group : groups) {
             if (group->custom_ctrl) group->custom_ctrl->fixup_items_positions();
         }
     });
diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp
index a4797fdc279..85b718d0b8c 100644
--- a/src/slic3r/GUI/UnsavedChangesDialog.cpp
+++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp
@@ -1664,17 +1664,19 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres
 
         // process changes of extruders count
         if (type == Preset::TYPE_PRINTER && old_pt == ptFFF &&
-            old_config.opt<ConfigOptionStrings>("extruder_colour")->values.size() != new_config.opt<ConfigOptionStrings>("extruder_colour")->values.size()) {
+            old_config.opt<ConfigOptionFloats>("nozzle_diameter")->values.size() != new_config.opt<ConfigOptionFloats>("nozzle_diameter")->values.size()) {
             wxString local_label = _L("Extruders count");
-            wxString old_val = from_u8((boost::format("%1%") % old_config.opt<ConfigOptionStrings>("extruder_colour")->values.size()).str());
-            wxString new_val = from_u8((boost::format("%1%") % new_config.opt<ConfigOptionStrings>("extruder_colour")->values.size()).str());
+            wxString old_val = from_u8((boost::format("%1%") % old_config.opt<ConfigOptionFloats>("nozzle_diameter")->values.size()).str());
+            wxString new_val = from_u8((boost::format("%1%") % new_config.opt<ConfigOptionFloats>("nozzle_diameter")->values.size()).str());
 
             //BBS: the page "General" changed to "Basic information" instead
             //m_tree->Append("extruders_count", type, _L("General"), _L("Capabilities"), local_label, old_val, new_val, category_icon_map.at("Basic information"));
             //m_tree->Append("extruders_count", type, _L("General"), _L("Capabilities"), local_label, old_val, new_val, category_icon_map.at("General"));
 
-            PresetItem pi = {type, "extruders_count", _L("General"), _L("Capabilities"), local_label, old_val, new_val};
-            m_presetitems.push_back(pi);
+            if (old_val != new_val) {
+                PresetItem pi = {type, "extruders_count", _L("General"), _L("Capabilities"), local_label, old_val, new_val};
+                m_presetitems.push_back(pi);
+            }
         }
 
         for (const std::string& opt_key : dirty_options) {

From 4f7e38ec2c65d7bf8bd5f44dd81ffea18619685b Mon Sep 17 00:00:00 2001
From: InfimechOfficial <144992637+InfimechOfficial@users.noreply.github.com>
Date: Sat, 14 Dec 2024 15:26:36 +0800
Subject: [PATCH 36/59] fix z_hop type (#7466)

* Update fdm_klipper_common.json

* Update fdm_machine_common.json

* Update fdm_klipper_common.json

* Update fdm_machine_common.json

* Update fdm_process_common.json

* Update fdm_process_common_HSN.json

* Update fdm_machine_common.json

* Update fdm_klipper_common.json

* Update fdm_machine_common.json

* Update fdm_klipper_common.json

* Update fdm_process_common.json

* Update fdm_process_common_HSN.json

* Update InfiMech Generic PLA.json

* Update Other PLA.json

* Update fdm_filament_pla.json

* Update fdm_filament_pla_Hyper.json

* Update fdm_filament_pla_Hyper_other.json

* Update fdm_filament_pla_other.json

* Update fdm_process_common.json

* Update fdm_process_common_HSN.json
---
 .../profiles/InfiMech/filament/InfiMech Generic PLA.json     | 5 ++++-
 resources/profiles/InfiMech/filament/Other PLA.json          | 5 ++++-
 resources/profiles/InfiMech/filament/fdm_filament_pla.json   | 2 +-
 .../profiles/InfiMech/filament/fdm_filament_pla_Hyper.json   | 2 +-
 .../InfiMech/filament/fdm_filament_pla_Hyper_other.json      | 2 +-
 .../profiles/InfiMech/filament/fdm_filament_pla_other.json   | 2 +-
 .../profiles/InfiMech/machine/HSN/fdm_klipper_common.json    | 2 +-
 .../profiles/InfiMech/machine/HSN/fdm_machine_common.json    | 2 +-
 resources/profiles/InfiMech/machine/fdm_klipper_common.json  | 2 +-
 resources/profiles/InfiMech/machine/fdm_machine_common.json  | 2 +-
 .../InfiMech/process/HSN/fdm_process_common_HSN.json         | 5 +++--
 resources/profiles/InfiMech/process/fdm_process_common.json  | 5 +++--
 12 files changed, 22 insertions(+), 14 deletions(-)

diff --git a/resources/profiles/InfiMech/filament/InfiMech Generic PLA.json b/resources/profiles/InfiMech/filament/InfiMech Generic PLA.json
index 1dabc7caff9..50338fa1953 100644
--- a/resources/profiles/InfiMech/filament/InfiMech Generic PLA.json	
+++ b/resources/profiles/InfiMech/filament/InfiMech Generic PLA.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "InfiMech TX 0.4 nozzle"
diff --git a/resources/profiles/InfiMech/filament/Other PLA.json b/resources/profiles/InfiMech/filament/Other PLA.json
index d27fcad1649..c6c895475d6 100644
--- a/resources/profiles/InfiMech/filament/Other PLA.json	
+++ b/resources/profiles/InfiMech/filament/Other PLA.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "InfiMech TX 0.4 nozzle"
diff --git a/resources/profiles/InfiMech/filament/fdm_filament_pla.json b/resources/profiles/InfiMech/filament/fdm_filament_pla.json
index d93d3b72e69..dd528dfdeb2 100644
--- a/resources/profiles/InfiMech/filament/fdm_filament_pla.json
+++ b/resources/profiles/InfiMech/filament/fdm_filament_pla.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper.json b/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper.json
index 97c8a80fde5..7fb27e2280b 100644
--- a/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper.json
+++ b/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper_other.json b/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper_other.json
index c29c200aae4..54ed13cd09a 100644
--- a/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper_other.json
+++ b/resources/profiles/InfiMech/filament/fdm_filament_pla_Hyper_other.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/InfiMech/filament/fdm_filament_pla_other.json b/resources/profiles/InfiMech/filament/fdm_filament_pla_other.json
index 075d9df6874..35c5da91752 100644
--- a/resources/profiles/InfiMech/filament/fdm_filament_pla_other.json
+++ b/resources/profiles/InfiMech/filament/fdm_filament_pla_other.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
index 2d1e2aaa55b..3cd0c7ec030 100644
--- a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
+++ b/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
@@ -204,7 +204,7 @@
       "0.4"
   ],
   "z_hop_types": [
-      "Auto Lift"
+      "Normal Lift"
   ]
 
   
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
index 31eedc682c2..eb272f991ec 100644
--- a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
+++ b/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
@@ -201,6 +201,6 @@
         "0.4"
     ],
     "z_hop_types": [
-        "Auto Lift"
+        "Normal Lift"
     ]
 }
diff --git a/resources/profiles/InfiMech/machine/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
index 23d50fef1ec..9d09be715d5 100644
--- a/resources/profiles/InfiMech/machine/fdm_klipper_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
@@ -204,7 +204,7 @@
       "0.4"
   ],
   "z_hop_types": [
-      "Auto Lift"
+      "Normal Lift"
   ]
 
   
diff --git a/resources/profiles/InfiMech/machine/fdm_machine_common.json b/resources/profiles/InfiMech/machine/fdm_machine_common.json
index 00dca16a19e..ca2e420340b 100644
--- a/resources/profiles/InfiMech/machine/fdm_machine_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_machine_common.json
@@ -201,6 +201,6 @@
         "0.4"
     ],
     "z_hop_types": [
-        "Auto Lift"
+        "Normal Lift"
     ]
 }
diff --git a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
index 177a5918d49..e0ebf59dcea 100644
--- a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
+++ b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json
@@ -23,7 +23,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -122,6 +122,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -129,7 +130,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",
diff --git a/resources/profiles/InfiMech/process/fdm_process_common.json b/resources/profiles/InfiMech/process/fdm_process_common.json
index f82c00298ce..40e0dcede3b 100644
--- a/resources/profiles/InfiMech/process/fdm_process_common.json
+++ b/resources/profiles/InfiMech/process/fdm_process_common.json
@@ -23,7 +23,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -122,6 +122,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -129,7 +130,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",

From ebb040d43ddd4dfab8977468f3b1993fa20bb3b5 Mon Sep 17 00:00:00 2001
From: FlyingbearOfficial
 <150423627+FlyingbearOfficial@users.noreply.github.com>
Date: Sat, 14 Dec 2024 15:27:09 +0800
Subject: [PATCH 37/59] fix some params about temps and processes something
 (#7459)

* Update FlyingBear S1 0.4 nozzle.json

* Update 0.16mm Optimal @FlyingBear Reborn3.json

* Update 0.16mm Optimal @FlyingBear S1.json

* Update fdm_process_common.json

* Update fdm_klipper_common.json

* Update fdm_machine_common.json

* Update fdm_klipper_common.json

* Update fdm_machine_common.json

* Update fdm_process_common.json

* Update fdm_process_common_S1.json

fix some parameters

* Update fdm_process_common.json

* Update FlyingBear S1 0.4 nozzle.json

* Update 0.08mm Extra Fine @FlyingBear S1.json

* Update 0.12mm Fine @FlyingBear S1.json

* Update 0.16mm Optimal @FlyingBear S1.json

* Update 0.20mm Standard @FlyingBear S1.json

* Update 0.24mm Draft @FlyingBear S1.json

* Update 0.08mm Extra Fine @FlyingBear Reborn3.json

* Update 0.12mm Fine @FlyingBear Reborn3.json

* Update 0.16mm Optimal @FlyingBear Reborn3.json

* Update 0.20mm Standard @FlyingBear Reborn3.json

* Update 0.24mm Draft @FlyingBear Reborn3.json

* Update FlyingBear S1 0.4 nozzle.json

* Update fdm_process_common_S1.json

* Update fdm_process_common.json

* Update 0.08mm Extra Fine @FlyingBear S1.json

* Update 0.12mm Fine @FlyingBear S1.json

* Update 0.16mm Optimal @FlyingBear S1.json

* Update 0.08mm Extra Fine @FlyingBear Reborn3.json

* Update 0.12mm Fine @FlyingBear Reborn3.json

* Update 0.16mm Optimal @FlyingBear Reborn3.json

* Update FlyingBear S1 0.4 nozzle.json

fix zhop type

* Update fdm_machine_common.json

fix zhop type

* Update fdm_process_common_S1.json

* Update fdm_process_common.json

* Update FlyingBear Generic PLA.json

* Update FlyingBear PLA @S1.json

* Update Other PLA @S1.json

* Update fdm_filament_pla @S1.json

* Update fdm_filament_pla_Hyper @S1.json

* Update fdm_filament_pla_other @S1.json

* Update fdm_filament_pla_Hyper_other @S1.json

* Update fdm_filament_pla.json

* Update fdm_filament_pla_Hyper.json

* Update fdm_process_common_S1.json

* Update fdm_process_common.json

* Update fdm_machine_common.json

* Update fdm_klipper_common.json
---
 .../profiles/FlyingBear/filament/FlyingBear Generic PLA.json | 5 ++++-
 .../profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json  | 5 ++++-
 resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json | 5 ++++-
 .../FlyingBear/filament/S1/fdm_filament_pla @S1.json         | 2 +-
 .../FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json   | 2 +-
 .../filament/S1/fdm_filament_pla_Hyper_other @S1.json        | 2 +-
 .../FlyingBear/filament/S1/fdm_filament_pla_other @S1.json   | 2 +-
 resources/profiles/FlyingBear/filament/fdm_filament_pla.json | 2 +-
 .../profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json | 2 +-
 .../FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json      | 2 +-
 .../profiles/FlyingBear/machine/fdm_klipper_common.json      | 2 +-
 .../profiles/FlyingBear/machine/fdm_machine_common.json      | 4 ++--
 .../process/0.08mm Extra Fine @FlyingBear Reborn3.json       | 3 ++-
 .../FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json  | 3 ++-
 .../process/0.16mm Optimal @FlyingBear Reborn3.json          | 3 ++-
 .../process/S1/0.08mm Extra Fine @FlyingBear S1.json         | 3 ++-
 .../FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json    | 1 +
 .../FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json | 3 ++-
 .../FlyingBear/process/S1/fdm_process_common_S1.json         | 5 +++--
 .../profiles/FlyingBear/process/fdm_process_common.json      | 5 +++--
 20 files changed, 39 insertions(+), 22 deletions(-)

diff --git a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json
index ec95e5dd99d..aea117419fd 100644
--- a/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
+++ b/resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear Reborn3 0.4 nozzle",
diff --git a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json
index 41577713953..e51861f40de 100644
--- a/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/FlyingBear PLA @S1.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear S1 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json
index e6e53290b3e..139d025b6b7 100644
--- a/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/Other PLA @S1.json	
@@ -15,8 +15,11 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "pressure_advance": [
-        "0.084"
+        "0.032"
     ],
     "compatible_printers": [
       "FlyingBear S1 0.4 nozzle"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json
index c7b0cf5b7f0..0bbf0700f37 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json
index 0d863dbccfd..0efe00c7272 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json
index 84a6c7895bc..873af639ce7 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_Hyper_other @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json
index 89664508323..1bdc4879918 100644
--- a/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json	
+++ b/resources/profiles/FlyingBear/filament/S1/fdm_filament_pla_other @S1.json	
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
index f1fe0ff99b5..3855f25b66a 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
index 4a3150818ab..05c348ce5ed 100644
--- a/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
+++ b/resources/profiles/FlyingBear/filament/fdm_filament_pla_Hyper.json
@@ -41,7 +41,7 @@
         "60"
     ],
     "hot_plate_temp_initial_layer" : [
-        "65"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "60"
diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json
index e8452b5c249..ffc1a0bbe7b 100644
--- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
@@ -207,6 +207,6 @@
       "0.4"
   ],
   "z_hop_types": [
-      "Auto Lift"
+      "Normal Lift"
   ]
 }
diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
index 7f2590d8d37..dba7278dd8f 100644
--- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
@@ -112,7 +112,7 @@
         "0"
     ],
   "machine_pause_gcode": "PAUSE",
-  "machine_start_gcode": ";V1.1\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
+  "machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
   "max_layer_height": [
       "0.28"
   ],
diff --git a/resources/profiles/FlyingBear/machine/fdm_machine_common.json b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
index e11e4e47e01..e6119fa451f 100644
--- a/resources/profiles/FlyingBear/machine/fdm_machine_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
@@ -113,7 +113,7 @@
         "0"
     ],
     "machine_pause_gcode": "PAUSE",
-    "machine_start_gcode": ";V1.1\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
+    "machine_start_gcode": ";R3_V1.1.0-20241115\n\nM140 S[bed_temperature_initial_layer_single] \nM104 S135\nG28\nG4 P200\nM190 S[bed_temperature_initial_layer_single] \nZ_TILT_ADJUST\nG90\nG1 X150 Y150 F3000\nG28 Z\nG1 X50 Y-4 F2500\nM109 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single] \nPRINT_START",
     "max_layer_height": [
         "0.28"
     ],
@@ -201,6 +201,6 @@
         "0.4"
     ],
     "z_hop_types": [
-        "Auto Lift"
+        "Normal Lift"
     ]
 }
diff --git a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json
index 39001ee125a..124619ba7f9 100644
--- a/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.08mm Extra Fine @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_process_common",
-    
+
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "7",
     "overhang_1_4_speed": "60",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json
index 1000d06175a..f725af6340a 100644
--- a/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common",
-
+	
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "5",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json
index f24fa3ca22c..a5d9abd3a55 100644
--- a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
+++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common",
-    
+
+    "inner_wall_acceleration": "3000",
     "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "30",
     "top_shell_layers": "6",
diff --git a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json
index 8fae3c93c62..e155b9a0928 100644
--- a/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.08mm Extra Fine @FlyingBear S1.json	
@@ -6,7 +6,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
-
+	
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "7",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json
index ca70860ca1f..8b72568142a 100644
--- a/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.12mm Fine @FlyingBear S1.json	
@@ -6,6 +6,7 @@
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
 
+    "inner_wall_acceleration": "3000",
     "bottom_shell_layers": "5",
     "overhang_1_4_speed": "50",
     "overhang_2_4_speed": "30",
diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json
index d19bf468349..4e8e2777104 100644
--- a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
+++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json	
@@ -5,7 +5,8 @@
 	"from": "system",
 	"instantiation": "true",
 	"inherits": "fdm_process_common_S1",
-    
+
+    "inner_wall_acceleration": "3000",
     "overhang_2_4_speed": "50",
     "overhang_3_4_speed": "30",
     "top_shell_layers": "6",
diff --git a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
index 0e5c4be0a92..b1ac2c11c47 100644
--- a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
+++ b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json
@@ -24,7 +24,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -123,6 +123,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -130,7 +131,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",
diff --git a/resources/profiles/FlyingBear/process/fdm_process_common.json b/resources/profiles/FlyingBear/process/fdm_process_common.json
index 656bbe92ed0..43b5ade20d8 100644
--- a/resources/profiles/FlyingBear/process/fdm_process_common.json
+++ b/resources/profiles/FlyingBear/process/fdm_process_common.json
@@ -24,7 +24,7 @@
 	"default_jerk": "0",
 	"detect_narrow_internal_solid_infill": "1",
 	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
+	"detect_thin_wall": "1",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.15",
 	"enable_arc_fitting": "0",
@@ -123,6 +123,7 @@
 	"slice_closing_radius": "0.049",
 	"slicing_mode": "regular",
 	"slow_down_layers": "0",
+	"slowdown_for_curled_perimeters": "0",
 	"small_perimeter_speed": "50%",
 	"small_perimeter_threshold": "0",
 	"solid_infill_filament": "1",
@@ -130,7 +131,7 @@
 	"sparse_infill_density": "15%",
 	"sparse_infill_filament": "1",
 	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "crosshatch",
+	"sparse_infill_pattern": "grid",
 
 	"spiral_mode": "0",
 	"staggered_inner_seams": "0",

From e8fe497be44cb86376fa9edbbdb1d3889c18a250 Mon Sep 17 00:00:00 2001
From: xiaoyeliu <166936931+womendoushihaoyin@users.noreply.github.com>
Date: Sun, 15 Dec 2024 00:49:28 +0800
Subject: [PATCH 38/59] fix: create custom filament (#7477)

---
 src/slic3r/GUI/CreatePresetsDialog.cpp | 31 +++++++++++++++++---------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/src/slic3r/GUI/CreatePresetsDialog.cpp b/src/slic3r/GUI/CreatePresetsDialog.cpp
index 4161afc5736..7c790f2959a 100644
--- a/src/slic3r/GUI/CreatePresetsDialog.cpp
+++ b/src/slic3r/GUI/CreatePresetsDialog.cpp
@@ -543,16 +543,26 @@ static char* read_json_file(const std::string &preset_path)
 
 static std::string get_printer_nozzle_diameter(std::string printer_name) {
 
-    size_t index = printer_name.find(" nozzle");
+    size_t index = printer_name.find(" nozzle)");
     if (std::string::npos == index) {
-        return "";
-    }
-    std::string nozzle           = printer_name.substr(0, index);
-    size_t      last_space_index = nozzle.find_last_of(" ");
-    if (std::string::npos == index) {
-        return "";
+        size_t index = printer_name.find(" nozzle");
+        if (std::string::npos == index) {
+            return "";
+        }
+        std::string nozzle           = printer_name.substr(0, index);
+        size_t      last_space_index = nozzle.find_last_of(" ");
+        if (std::string::npos == index) {
+            return "";
+        }
+        return nozzle.substr(last_space_index + 1);
+    } else {
+        std::string nozzle = printer_name.substr(0, index);
+        size_t      last_bracket_index = nozzle.find_last_of("(");
+        if (std::string::npos == index) {
+            return "";
+        }
+        return nozzle.substr(last_bracket_index + 1);
     }
-    return nozzle.substr(last_space_index + 1);
 }
 
 static void adjust_dialog_in_screen(DPIDialog* dialog) {
@@ -1179,10 +1189,11 @@ wxArrayString CreateFilamentPresetDialog::get_filament_preset_choices()
             std::string preset_name = filament_preset->name;
             BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " filament_id: " << filament_preset->filament_id << " preset name: " << filament_preset->name;
             size_t      index_at    = preset_name.find(" @");
+            std::string cur_preset_name = preset_name;
             if (std::string::npos != index_at) {
-                std::string cur_preset_name = preset_name.substr(0, index_at);
-                preset_name_set.insert(from_u8(cur_preset_name));
+                cur_preset_name = preset_name.substr(0, index_at);
             }
+            preset_name_set.insert(from_u8(cur_preset_name));
         }
         assert(1 == preset_name_set.size());
         if (preset_name_set.size() > 1) {

From 8f62c7924e65f793aad7938bafecac2e8fb6a8ca Mon Sep 17 00:00:00 2001
From: SoftFever <softfeverever@gmail.com>
Date: Tue, 17 Dec 2024 21:49:29 +0800
Subject: [PATCH 39/59] Fix errors

---
 .../Volumic/machine/EXO42 (0.4 nozzle).json        |  9 ---------
 .../Volumic/machine/EXO65 (0.6 nozzle).json        |  9 ---------
 .../Volumic/machine/SH65 (0.4 nozzle).json         |  9 ---------
 .../Volumic/machine/VS20MK2 (0.4 nozzle).json      |  9 ---------
 .../Volumic/machine/VS30MK2 (0.4 nozzle).json      |  9 ---------
 .../Volumic/machine/VS30MK3 (0.4 nozzle).json      |  9 ---------
 .../Volumic/machine/VS30SC2 (0.4 nozzle).json      |  9 ---------
 .../Volumic/machine/fdm_volumic_common.json        |  9 ---------
 .../process/fdm_process_volumic_common.json        | 14 --------------
 9 files changed, 86 deletions(-)

diff --git a/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json
index cba820c9d2e..d7d1c6d4bb2 100644
--- a/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json	
@@ -37,15 +37,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y419 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json b/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json
index 739316916b4..c783bd7d30e 100644
--- a/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json	
+++ b/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json	
@@ -37,15 +37,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y649 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json
index 95e026c3feb..509e1e5d84e 100644
--- a/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json	
@@ -37,15 +37,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json
index fb15fbc8f79..882a25b051a 100644
--- a/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json	
@@ -35,15 +35,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json
index 4cdc3389b72..b93efe2ab2e 100644
--- a/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json	
@@ -35,15 +35,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json
index 5ceea1b57a5..ba6f34aecfc 100644
--- a/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json	
@@ -37,15 +37,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json
index 575f6bd2f20..ae318a6f850 100644
--- a/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json	
+++ b/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json	
@@ -37,15 +37,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 
 	"machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
 	"before_layer_change_gcode": "G92 E0",
diff --git a/resources/profiles/Volumic/machine/fdm_volumic_common.json b/resources/profiles/Volumic/machine/fdm_volumic_common.json
index 1b49ea89626..37f63f0ada3 100644
--- a/resources/profiles/Volumic/machine/fdm_volumic_common.json
+++ b/resources/profiles/Volumic/machine/fdm_volumic_common.json
@@ -19,15 +19,6 @@
 	"machine_max_jerk_x": ["0"],
 	"machine_max_jerk_y": ["0"],
 	"machine_max_jerk_z": ["0"],
-	"default_acceleration": ["0"],
-	"outer_wall_acceleration": ["0"],
-	"inner_wall_acceleration": ["0"],
-	"bridge_acceleration": ["0"],
-	"sparse_infill_acceleration": ["0"],
-	"internal_solid_infill_acceleration": ["0"],
-	"initial_layer_acceleration": ["0"],
-	"top_surface_acceleration": ["0"],
-	"travel_acceleration": ["0"],
 	"printer_settings_id": "",
 	"printer_technology": "FFF",
 	"printer_variant": "0.4",
diff --git a/resources/profiles/Volumic/process/fdm_process_volumic_common.json b/resources/profiles/Volumic/process/fdm_process_volumic_common.json
index 71b63b8e597..a371e0fbad1 100644
--- a/resources/profiles/Volumic/process/fdm_process_volumic_common.json
+++ b/resources/profiles/Volumic/process/fdm_process_volumic_common.json
@@ -3,20 +3,6 @@
     "name": "fdm_process_volumic_common",
     "from": "system",
     "instantiation": "false",
-	"machine_max_acceleration_e": ["0"],
-	"machine_max_acceleration_extruding": ["0"],
-	"machine_max_acceleration_retracting": ["0"],
-	"machine_max_acceleration_x": ["0"],
-	"machine_max_acceleration_y": ["0"],
-	"machine_max_acceleration_z": ["0"],
-	"machine_max_speed_e": ["0"],
-	"machine_max_speed_x": ["0"],
-	"machine_max_speed_y": ["0"],
-	"machine_max_speed_z": ["0"],
-	"machine_max_jerk_e": ["0"],
-	"machine_max_jerk_x": ["0"],
-	"machine_max_jerk_y": ["0"],
-	"machine_max_jerk_z": ["0"],
 	"default_acceleration": ["0"],
 	"outer_wall_acceleration": ["0"],
 	"inner_wall_acceleration": ["0"],

From 8c36d6b88410e079fe27c5e4abdc8c5fb5385c8b Mon Sep 17 00:00:00 2001
From: KrisMorr <154343071+KrisMorr@users.noreply.github.com>
Date: Tue, 17 Dec 2024 15:09:56 +0100
Subject: [PATCH 40/59] update Polish translation + fix typo (#7746)

* update Polish translations+typo

* Update OrcaSlicer_pl.po

typo
---
 localization/i18n/pl/OrcaSlicer_pl.po | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po
index 662480125b7..f34f1ae89d7 100644
--- a/localization/i18n/pl/OrcaSlicer_pl.po
+++ b/localization/i18n/pl/OrcaSlicer_pl.po
@@ -13,7 +13,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 "
 "|| n%100>14) ? 1 : 2);\n"
-"X-Generator: Poedit 3.4.2\n"
+"X-Generator: Poedit 3.5\n"
 
 msgid "Supports Painting"
 msgstr "Malowanie podpór"
@@ -10195,7 +10195,7 @@ msgstr ""
 "można zakotwiczyć mostów. "
 
 msgid "Reverse on even"
-msgstr "Znień kierunek na parzystych"
+msgstr "Zmień kierunek na parzystych"
 
 msgid "Overhang reversal"
 msgstr "Przeciwny kierunek przy nawisach"
@@ -13046,12 +13046,15 @@ msgid "Force a retraction when changes layer"
 msgstr "Wymuś retrakcję przy zmianie warstwy"
 
 msgid "Retract on top layer"
-msgstr ""
+msgstr "Retrakcja na górnej warstwie"
 
 msgid ""
 "Force a retraction on top layer. Disabling could prevent clog on very slow "
 "patterns with small movements, like Hilbert curve"
 msgstr ""
+"Włącz wymuszanie retrakcji na górnej warstwie. Wyłączenie tej opcji może "
+"prowadzić do gromadzenia się materiału i zatkania dyszy, zwłaszcza przy "
+"drukowaniu skomplikowanych i wolnych wzorów, takich jak krzywa Hilberta."
 
 msgid "Retraction Length"
 msgstr "Długość retrakcji"

From 56b8f69b6d0231fb356f288852449136cdd2681a Mon Sep 17 00:00:00 2001
From: Tyler Satre <tyler.satre@gmail.com>
Date: Tue, 17 Dec 2024 09:11:48 -0500
Subject: [PATCH 41/59] Fix Devcontainer for ARM Mac (#7723)

* Update devcontainer.json

* Create Dockerfile
---
 .devcontainer/Dockerfile        |  2 ++
 .devcontainer/devcontainer.json | 11 +++++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)
 create mode 100644 .devcontainer/Dockerfile

diff --git a/.devcontainer/Dockerfile b/.devcontainer/Dockerfile
new file mode 100644
index 00000000000..4e841c04bbf
--- /dev/null
+++ b/.devcontainer/Dockerfile
@@ -0,0 +1,2 @@
+ARG BASE_IMAGE
+FROM ${BASE_IMAGE}
diff --git a/.devcontainer/devcontainer.json b/.devcontainer/devcontainer.json
index 413866a667b..07d6a4b0d04 100644
--- a/.devcontainer/devcontainer.json
+++ b/.devcontainer/devcontainer.json
@@ -1,6 +1,13 @@
 {
 	"name": "OrcaSlicer",
-	"image": "mcr.microsoft.com/devcontainers/cpp:ubuntu-20.04",
+	"build": {
+	"dockerfile": "Dockerfile",
+		"args": {
+			"PLATFORM": "linux/amd64",
+			"BASE_IMAGE": "mcr.microsoft.com/devcontainers/cpp:ubuntu-20.04"
+		},
+		"options": ["--platform=linux/amd64"]
+	},
 	"runArgs": ["--env-file", "/tmp/devcontainer.env"],
     "features": {
         "ghcr.io/devcontainers/features/desktop-lite:1": {
@@ -48,4 +55,4 @@
 		"Set postCreate executable flag": "chmod +x .devcontainer/postCreate.sh"
 	},
 	"postCreateCommand": "sudo .devcontainer/postCreate.sh"
-}
\ No newline at end of file
+}

From c2d1844368fb14b54e518be57cb139e0244c426f Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:16:08 +0100
Subject: [PATCH 42/59] remove pellet_flow_coefficient and implement
 extruder_rotation_distance and mixing_stepper_rotation_distance

---
 src/libslic3r/Preset.cpp      |  2 +-
 src/libslic3r/Preset.hpp      | 11 ---------
 src/libslic3r/PrintConfig.cpp | 44 +++++++++++------------------------
 src/slic3r/GUI/Tab.cpp        | 17 ++++----------
 4 files changed, 19 insertions(+), 55 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 5fe32addbaf..c2c3eac9938 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -818,7 +818,7 @@ static std::vector<std::string> s_Preset_print_options {
 };
 
 static std::vector<std::string> s_Preset_filament_options {
-    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "pellet_flow_coefficient", "filament_type", "filament_soluble", "filament_is_support",
+    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble", "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp
index 145ae5b6f7d..62c94cdbf81 100644
--- a/src/libslic3r/Preset.hpp
+++ b/src/libslic3r/Preset.hpp
@@ -319,17 +319,6 @@ class Preset
     BedType get_default_bed_type(PresetBundle *preset_bundle);
     bool has_cali_lines(PresetBundle* preset_bundle);
 
-
-    static double convert_pellet_flow_to_filament_diameter(double pellet_flow_coefficient)
-    {
-        return sqrt(4 / (PI * pellet_flow_coefficient)); 
-    }
-
-    static double convert_filament_diameter_to_pellet_flow(double filament_diameter)
-    {
-        return 4 / (pow(filament_diameter, 2) * PI); 
-    }
-
     static const std::vector<std::string>&  print_options();
     static const std::vector<std::string>&  filament_options();
     // Printer options contain the nozzle options.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 4324426803b..4fbb8b52701 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1933,37 +1933,19 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats { 1.75 });
 
-    /*
-        Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
-        The overall tech is very similar to FDM printing. 
-        It is FDM printing, but instead of filaments, it uses pellets.
-
-        The difference here is that where filaments have a filament_diameter that is used to calculate 
-        the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
-        devised for that particular pellet.
-
-        pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
-        Shape, material and density of an individual pellet will determine the packing density and
-        the only thing that matters for 3d printing is how much of that pellet material is extruded by 
-        one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
-        for your own pellets for a particular printer model.
-
-        We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
-        does already with very minor adjustments.
-
-        filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
-
-        sqrt just makes the relationship between flow_coefficient and volume linear.
-
-        higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
-        All other calculations remain the same for slicing.
-    */
-
-    def = this->add("pellet_flow_coefficient", coFloats);
-    def->label = L("Pellet flow coefficient");
-    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
-    def->min = 0;
-    def->set_default_value(new ConfigOptionFloats{ 0.4157 });
+    def          = this->add("extruder_rotation_distance", coFloat);
+    def->label   = L("Extruder rotation distance");
+    def->tooltip = L("Extruder rotation distance (mm³)");
+    def->sidetext = L("mm³");
+    def->min     = 0;
+    def->set_default_value(new ConfigOptionFloat(0));    
+    
+    def          = this->add("mixing_stepper_rotation_distance", coFloat);
+    def->label   = L("Mixing stepper rotation distance");
+    def->tooltip = L("Mixing stepper rotation distance (mm³)");
+    def->sidetext = L("mm³");
+    def->min     = 0;
+    def->set_default_value(new ConfigOptionFloat(0));
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 04f09f00b18..f80b998ed8f 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1412,19 +1412,12 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         }
     }
 
-
-    if (opt_key == "pellet_flow_coefficient") 
+    if (m_preset_bundle->printers.get_edited_preset().config.opt_bool("pellet_modded_printer")) 
     {
-        double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
+        double double_value = sqrt(4 / PI);
         m_config->set_key_value("filament_diameter", new ConfigOptionFloats{double_value});
 	}
-
-    if (opt_key == "filament_diameter") {
-        double double_value = Preset::convert_filament_diameter_to_pellet_flow(boost::any_cast<double>(value));
-        m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
-    }
-    
-
+ 
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3303,7 +3296,8 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_distance");
+        optgroup->append_single_option_line("mixing_stepper_rotation_distance");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3633,7 +3627,6 @@ void TabFilament::toggle_options()
         toggle_line("adaptive_pressure_advance_bridges", has_adaptive_pa && pa);
 
         bool is_pellet_printer = cfg.opt_bool("pellet_modded_printer");
-        toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
 
         bool support_chamber_temp_control = this->m_preset_bundle->printers.get_edited_preset().config.opt_bool("support_chamber_temp_control");

From 62c787cddf1be972ca6d5fe6e70fcbafe3abdc58 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:22:52 +0100
Subject: [PATCH 43/59] remove refererence to pellet-flow-coefficient

---
 src/slic3r/GUI/Tab.cpp | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index f80b998ed8f..4fd57b6df76 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3766,7 +3766,7 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_modded_printer");
         optgroup->append_single_option_line("multi_zone");
         optgroup->append_single_option_line("multi_zone_number");
         optgroup->append_single_option_line("bbl_use_printhost");

From 5fde38e5304d24d4b762cf51f58181cdbbbcdc46 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Thu, 5 Dec 2024 15:32:59 +0100
Subject: [PATCH 44/59] update description for rotation distance parameters

---
 src/libslic3r/PrintConfig.cpp | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 4fbb8b52701..e59422c1a80 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1935,14 +1935,14 @@ void PrintConfigDef::init_fff_params()
 
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
-    def->tooltip = L("Extruder rotation distance (mm³)");
+    def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(0));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
-    def->tooltip = L("Mixing stepper rotation distance (mm³)");
+    def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(0));

From 90b2ae68f0f13fa20e6017cbddb08df5940d1fb1 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 14:39:15 +0100
Subject: [PATCH 45/59] restore pellet-flow-coefficient logic

---
 src/libslic3r/Preset.cpp      |  4 +++-
 src/libslic3r/Preset.hpp      | 11 +++++++++++
 src/libslic3r/PrintConfig.cpp | 31 ++++++++++++++++++++++++++++---
 src/slic3r/GUI/Tab.cpp        | 29 +++++++++++++++++++++--------
 4 files changed, 63 insertions(+), 12 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index c2c3eac9938..15e5259f076 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -818,7 +818,9 @@ static std::vector<std::string> s_Preset_print_options {
 };
 
 static std::vector<std::string> s_Preset_filament_options {
-    /*"filament_colour", */ "default_filament_colour","required_nozzle_HRC","filament_diameter", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble", "filament_is_support",
+    /*"filament_colour", */ "default_filament_colour", "required_nozzle_HRC", "filament_diameter", "pellet_flow_coefficient",
+    "pellet_flow_coefficient", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble",
+    "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
     "nozzle_temperature", "nozzle_temperature_initial_layer",
diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp
index 62c94cdbf81..145ae5b6f7d 100644
--- a/src/libslic3r/Preset.hpp
+++ b/src/libslic3r/Preset.hpp
@@ -319,6 +319,17 @@ class Preset
     BedType get_default_bed_type(PresetBundle *preset_bundle);
     bool has_cali_lines(PresetBundle* preset_bundle);
 
+
+    static double convert_pellet_flow_to_filament_diameter(double pellet_flow_coefficient)
+    {
+        return sqrt(4 / (PI * pellet_flow_coefficient)); 
+    }
+
+    static double convert_filament_diameter_to_pellet_flow(double filament_diameter)
+    {
+        return 4 / (pow(filament_diameter, 2) * PI); 
+    }
+
     static const std::vector<std::string>&  print_options();
     static const std::vector<std::string>&  filament_options();
     // Printer options contain the nozzle options.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index e59422c1a80..675acfd94db 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1933,19 +1933,44 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats { 1.75 });
 
+    /*
+        Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
+        The overall tech is very similar to FDM printing. 
+        It is FDM printing, but instead of filaments, it uses pellets.
+        The difference here is that where filaments have a filament_diameter that is used to calculate 
+        the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
+        devised for that particular pellet.
+        pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
+        Shape, material and density of an individual pellet will determine the packing density and
+        the only thing that matters for 3d printing is how much of that pellet material is extruded by 
+        one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
+        for your own pellets for a particular printer model.
+        We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
+        does already with very minor adjustments.
+        filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
+        sqrt just makes the relationship between flow_coefficient and volume linear.
+        higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
+        All other calculations remain the same for slicing.
+    */
+
+    def = this->add("pellet_flow_coefficient", coFloats);
+    def->label = L("Pellet flow coefficient");
+    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
+    def->min = 0;
+    def->set_default_value(new ConfigOptionFloats{ 0.4157 });
+
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
     def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(0));    
+    def->set_default_value(new ConfigOptionFloat(456));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
     def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
-    def->sidetext = L("mm³");
     def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(0));
+    def->set_default_value(new ConfigOptionFloat(6000));
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 4fd57b6df76..5f1292c32a4 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1411,13 +1411,18 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             og_freq_chng_params->set_value("brim", val);
         }
     }
-
-    if (m_preset_bundle->printers.get_edited_preset().config.opt_bool("pellet_modded_printer")) 
+ 
+    if (opt_key == "pellet_flow_coefficient") 
     {
-        double double_value = sqrt(4 / PI);
+        double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
         m_config->set_key_value("filament_diameter", new ConfigOptionFloats{double_value});
-	}
- 
+    }
+
+    if (opt_key == "filament_diameter") {
+        double double_value = Preset::convert_filament_diameter_to_pellet_flow(boost::any_cast<double>(value));
+        m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
+    }
+
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3296,8 +3301,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("extruder_rotation_distance");
-        optgroup->append_single_option_line("mixing_stepper_rotation_distance");
+        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_distance", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("mixing_stepper_rotation_distance", "pellet-flow-coefficient");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3627,6 +3633,7 @@ void TabFilament::toggle_options()
         toggle_line("adaptive_pressure_advance_bridges", has_adaptive_pa && pa);
 
         bool is_pellet_printer = cfg.opt_bool("pellet_modded_printer");
+        toggle_line("pellet_flow_coefficient", is_pellet_printer);
         toggle_line("filament_diameter", !is_pellet_printer);
 
         bool support_chamber_temp_control = this->m_preset_bundle->printers.get_edited_preset().config.opt_bool("support_chamber_temp_control");
@@ -3634,6 +3641,12 @@ void TabFilament::toggle_options()
 
         for (auto el : {"supertack_plate_temp", "supertack_plate_temp_initial_layer", "cool_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp", "eng_plate_temp_initial_layer", "textured_plate_temp", "textured_plate_temp_initial_layer"})
             toggle_line(el, is_BBL_printer);
+            
+        toggle_line("extruder_rotation_distance", is_pellet_printer);
+        toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
+        if (is_pellet_printer) {
+            m_config->set_key_value("filament_diameter", new ConfigOptionFloats{sqrt(4 / PI)});
+        }
 
         bool is_multi_zone = cfg.opt_bool("multi_zone");
         int  zone_count    = is_multi_zone ? cfg.opt_int("multi_zone_number") : 0;
@@ -3766,7 +3779,7 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer");
+        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
         optgroup->append_single_option_line("multi_zone");
         optgroup->append_single_option_line("multi_zone_number");
         optgroup->append_single_option_line("bbl_use_printhost");

From 8f666d60dc15d7c50638daa1d788a6bee56a73ab Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 14:42:23 +0100
Subject: [PATCH 46/59] fix code formatting

---
 src/libslic3r/PrintConfig.cpp | 6 ++++++
 src/slic3r/GUI/Tab.cpp        | 4 +++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 675acfd94db..5b15adf15c6 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1937,18 +1937,24 @@ void PrintConfigDef::init_fff_params()
         Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
         The overall tech is very similar to FDM printing. 
         It is FDM printing, but instead of filaments, it uses pellets.
+        
         The difference here is that where filaments have a filament_diameter that is used to calculate 
         the volume of filament ingested, pellets have a particular flow_coefficient that is empirically 
         devised for that particular pellet.
+        
         pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
         Shape, material and density of an individual pellet will determine the packing density and
         the only thing that matters for 3d printing is how much of that pellet material is extruded by 
         one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
         for your own pellets for a particular printer model.
+        
         We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it 
         does already with very minor adjustments.
+        
         filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )
+        
         sqrt just makes the relationship between flow_coefficient and volume linear.
+        
         higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
         All other calculations remain the same for slicing.
     */
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 5f1292c32a4..d2b2042547a 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1411,7 +1411,8 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             og_freq_chng_params->set_value("brim", val);
         }
     }
- 
+
+
     if (opt_key == "pellet_flow_coefficient") 
     {
         double double_value = Preset::convert_pellet_flow_to_filament_diameter(boost::any_cast<double>(value));
@@ -1423,6 +1424,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
     }
 
+
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);

From 91c2147519c09462d6c5a2dbfcccb52324e2dbb3 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Fri, 6 Dec 2024 15:18:53 +0100
Subject: [PATCH 47/59] update doc

---
 doc/pellet-flow-coefficient.md | 44 +++++++++++++++++++++-------------
 src/libslic3r/PrintConfig.cpp  |  6 ++---
 2 files changed, 30 insertions(+), 20 deletions(-)

diff --git a/doc/pellet-flow-coefficient.md b/doc/pellet-flow-coefficient.md
index 8e91312ad63..87df0316b70 100644
--- a/doc/pellet-flow-coefficient.md
+++ b/doc/pellet-flow-coefficient.md
@@ -1,23 +1,33 @@
-Large format printers with print volumes in the order of 1m^3 generally use pellets for printing.
-The overall tech is very similar to FDM printing.
-It is FDM printing, but instead of filaments, it uses pellets.
+# Pellet Flow Coefficient
+## Introduction
+Pellet 3D printers, commonly used for print volumes around 1m³, rely on technology similar to FDM printing. However, instead of using filaments, these printers utilize pellets as the printing material.
 
-The difference here is that where filaments have a filament_diameter that is used to calculate
-the volume of filament ingested, pellets have a particular flow_coefficient that is empirically
-devised for that particular pellet.
+The main difference compared to filament-based printing lies in the fact that, while filament_diameter is a fixed value used to calculate the volume of extruded material, pellets require a specific coefficient: the pellet_flow_coefficient. This coefficient is empirically derived for a particular type of pellet and printer configuration.
 
-pellet_flow_coefficient is basically a measure of the packing density of a particular pellet.
-Shape, material and density of an individual pellet will determine the packing density and
-the only thing that matters for 3d printing is how much of that pellet material is extruded by
-one turn of whatever feeding mehcanism/gear your printer uses. You can emperically derive that
-for your own pellets for a particular printer model.
+## Pellet Flow Coefficient
+The pellet_flow_coefficient is a value about pellets extrusion capacity, influenced by factors such as shape, material, and individual material viscosity. This value determines how much material is extruded per turn of the printer's feeding mechanism.
 
-We are translating the pellet_flow_coefficient into filament_diameter so that everything works just like it
-does already with very minor adjustments.
+Internally, the pellet_flow_coefficient is translated into an equivalent filament_diameter value to maintain compatibility with traditional volumetric calculations used in FDM printing. The formula is:
 
-filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )
+*filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
 
-sqrt just makes the relationship between flow_coefficient and volume linear.
+### Relationship Between Pellet Flow Coefficient and Material Flow
+- Higher packing density → More material extruded per turn → Higher pellet_flow_coefficient → Simulated as a filament with a larger diameter.
+- Reducing the pellet_flow_coefficient by 20% is equivalent to decreasing the extrusion flow by 20%.
+
+### Advantages of Pellet Flow Coefficient
+- If the rotation distance is fixed, the pellet_flow_coefficient allows control over the extruder’s flow percentage without modifying the simulated filament diameter.
+- For printers that support dynamic modification of the rotation distance (e.g., with Klipper using the `SET_ROTATION_DISTANCE` command), the pellet_flow_coefficient can be set to 1, and the rotation distance becomes the reference value for extruded volume.
+
+## Extruder Rotation Distance
+The rotation distance represents the volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is essential for accurately configuring the printer to achieve precise prints.
+
+### Usage
+To use this value during printing, it must be explicitly called within the startup script `START_PRINT`.
+
+## Mixing Stepper Rotation Distance
+The mixing stepper rotation distance is the value that controls how much material is actively fed into the extruder by the feeding mechanism.
+
+### Usage
+This parameter also needs to be explicitly called in the startup script `START_PRINT` to correctly configure the material flow during printing.
 
-higher packing density -> more material extruded by single turn -> higher pellet_flow_coefficient -> treated as if a filament of larger diameter is being used
-All other calculations remain the same for slicing.
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 5b15adf15c6..1562ba5602d 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1961,20 +1961,20 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("pellet_flow_coefficient", coFloats);
     def->label = L("Pellet flow coefficient");
-    def->tooltip = L("Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n\nInternally it is converted to filament_diameter. All other volume calculations remain the same.\n\nfilament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )");
+    def->tooltip = L("A value representing the extrusion capacity of pellets, influenced by factors such as shape, material, and viscosity. It determines how much material is extruded per turn and is converted to an equivalent filament diameter for volumetric calculations.");
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
     def          = this->add("extruder_rotation_distance", coFloat);
     def->label   = L("Extruder rotation distance");
-    def->tooltip = L("This setting determines how much filament volume is extruded per full rotation of the extruder stepper motor. It is critical for accurate filament flow control, ensuring consistent extrusion during 3D printing.");
+    def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(456));    
     
     def          = this->add("mixing_stepper_rotation_distance", coFloat);
     def->label   = L("Mixing stepper rotation distance");
-    def->tooltip = L("This parameter is used in 3D printers with mixing extruders to calculate the volume of material pushed per step of the mixing motor. It ensures precise control of the filament");
+    def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(6000));
 

From cde9c2eaa59dcadd38d868a1ed5e1ac4b1305115 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 11:49:36 +0100
Subject: [PATCH 48/59] update fields

---
 src/libslic3r/Preset.cpp      |  6 ++++--
 src/libslic3r/PrintConfig.cpp | 27 +++++++++++++++++++----
 src/slic3r/GUI/Tab.cpp        | 40 +++++++++++++++++++++++++++--------
 3 files changed, 58 insertions(+), 15 deletions(-)

diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp
index 15e5259f076..692e414ec19 100644
--- a/src/libslic3r/Preset.cpp
+++ b/src/libslic3r/Preset.cpp
@@ -819,7 +819,7 @@ static std::vector<std::string> s_Preset_print_options {
 
 static std::vector<std::string> s_Preset_filament_options {
     /*"filament_colour", */ "default_filament_colour", "required_nozzle_HRC", "filament_diameter", "pellet_flow_coefficient",
-    "pellet_flow_coefficient", "extruder_rotation_distance", "mixing_stepper_rotation_distance", "filament_type", "filament_soluble",
+    "pellet_flow_coefficient", "extruder_rotation_volume", "mixing_stepper_rotation_volume", "filament_type", "filament_soluble",
     "filament_is_support",
     "filament_max_volumetric_speed",
     "filament_flow_ratio", "filament_density", "filament_cost", "filament_minimal_purge_on_wipe_tower",
@@ -883,7 +883,9 @@ static std::vector<std::string> s_Preset_printer_options {
     "cooling_tube_retraction",
     "cooling_tube_length", "high_current_on_filament_swap", "parking_pos_retraction", "extra_loading_move", "purge_in_prime_tower", "enable_filament_ramming",
     "z_offset",
-    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", "pellet_modded_printer", "multi_zone", "multi_zone_number", "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
+    "disable_m73", "preferred_orientation", "emit_machine_limits_to_gcode", 
+    "pellet_modded_printer", "multi_zone", "multi_zone_number", "use_extruder_rotation_volume", "use_active_pellet_feeding", "active_feeder_motor_name", 
+    "support_multi_bed_types","bed_mesh_min","bed_mesh_max","bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "enable_long_retraction_when_cut","long_retractions_when_cut","retraction_distances_when_cut"
     };
 
 static std::vector<std::string> s_Preset_sla_print_options {
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 1562ba5602d..0ffe9b29874 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1965,15 +1965,15 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
-    def          = this->add("extruder_rotation_distance", coFloat);
-    def->label   = L("Extruder rotation distance");
+    def          = this->add("extruder_rotation_volume", coFloat);
+    def->label   = L("Extruder rotation volume");
     def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(456));    
     
-    def          = this->add("mixing_stepper_rotation_distance", coFloat);
-    def->label   = L("Mixing stepper rotation distance");
+    def          = this->add("mixing_stepper_rotation_volume", coFloat);
+    def->label   = L("Mixing stepper rotation volume");
     def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
     def->min     = 0;
     def->set_default_value(new ConfigOptionFloat(6000));
@@ -2886,6 +2886,25 @@ void PrintConfigDef::init_fff_params()
     def->max     = 10;  
     def->set_default_value(new ConfigOptionInt(1));	
 
+    def          = this->add("use_extruder_rotation_volume", coBool);
+    def->label   = L("Use extruder rotation volume");
+    def->tooltip = L("Use extruder rotation volume instead of the pellet flow coefficent");
+    def->mode    = comSimple;
+    def->set_default_value(new ConfigOptionBool(true));
+    
+    def          = this->add("active_feeder_motor_name", coString);
+    def->label   = L("Active feeder motor name");
+    def->tooltip = "Name that identify the feeder motor";
+    def->mode    = comAdvanced;
+    def->set_default_value(new ConfigOptionString(""));
+
+        
+    def          = this->add("use_active_pellet_feeding", coBool);
+    def->label   = L("Use forded pellet feeding");
+    def->tooltip = L("Enable this option if your printer has active pellet feeding");
+    def->mode    = comSimple;
+    def->set_default_value(new ConfigOptionBool(false));
+
     def = this->add("support_multi_bed_types", coBool);
     def->label = L("Support multi bed types");
     def->tooltip = L("Enable this option if you want to use multiple bed types");
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index d2b2042547a..0164b8ee1d0 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -1424,7 +1424,6 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
         m_config->set_key_value("pellet_flow_coefficient", new ConfigOptionFloats{double_value});
     }
 
-
     if (opt_key == "single_extruder_multi_material"  ){
         const auto bSEMM = m_config->opt_bool("single_extruder_multi_material");
         wxGetApp().sidebar().show_SEMM_buttons(bSEMM);
@@ -3304,8 +3303,8 @@ void TabFilament::build()
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
         optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("extruder_rotation_distance", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("mixing_stepper_rotation_distance", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("extruder_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "pellet-flow-coefficient");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3643,9 +3642,16 @@ void TabFilament::toggle_options()
 
         for (auto el : {"supertack_plate_temp", "supertack_plate_temp_initial_layer", "cool_plate_temp", "cool_plate_temp_initial_layer", "eng_plate_temp", "eng_plate_temp_initial_layer", "textured_plate_temp", "textured_plate_temp_initial_layer"})
             toggle_line(el, is_BBL_printer);
-            
-        toggle_line("extruder_rotation_distance", is_pellet_printer);
-        toggle_line("mixing_stepper_rotation_distance", is_pellet_printer);
+
+        toggle_line("extruder_rotation_volume", is_pellet_printer);
+        toggle_line("mixing_stepper_rotation_volume", is_pellet_printer);
+
+        bool use_active_pellet_feeding = cfg.opt_bool("use_active_pellet_feeding");
+        toggle_line("mixing_stepper_rotation_volume", is_pellet_printer && use_active_pellet_feeding);
+
+        bool use_extruder_rotation_volume = cfg.opt_bool("use_extruder_rotation_volume");
+        toggle_line("extruder_rotation_volume", is_pellet_printer && use_extruder_rotation_volume);
+        toggle_line("pellet_flow_coefficient", is_pellet_printer && !use_extruder_rotation_volume);
         if (is_pellet_printer) {
             m_config->set_key_value("filament_diameter", new ConfigOptionFloats{sqrt(4 / PI)});
         }
@@ -3663,6 +3669,7 @@ void TabFilament::toggle_options()
         toggle_line("nozzle_temperature_initial_layer", !is_multi_zone);
         toggle_line("nozzle_temperature", !is_multi_zone);
     }
+
     if (m_active_page->title() == L("Setting Overrides"))
         update_filament_overrides_page(&cfg);
 
@@ -3782,8 +3789,10 @@ void TabPrinter::build_fff()
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
         optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("multi_zone");
-        optgroup->append_single_option_line("multi_zone_number");
+        optgroup->append_single_option_line("use_extruder_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("use_active_pellet_feeding", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("multi_zone", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("multi_zone_number", "pellet-flow-coefficient");
         optgroup->append_single_option_line("bbl_use_printhost");
         optgroup->append_single_option_line("disable_m73");
         option = optgroup->get_option("thumbnails");
@@ -4385,6 +4394,8 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("long_retractions_when_cut", "", extruder_idx);
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
+                optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
+                optgroup->append_single_option_line("active_feeder_motor_name", "pellet-flow-coefficient", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 
@@ -4539,9 +4550,14 @@ void TabPrinter::toggle_options()
             toggle_line(el, is_BBL_printer);
 
         // SoftFever: hide non-BBL settings
-        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "multi_zone", "multi_zone_number", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
+        for (auto el : {"use_firmware_retraction", "use_relative_e_distances", "support_multi_bed_types", "pellet_modded_printer", "multi_zone", "multi_zone_number", "use_extruder_rotation_volume", "use_active_pellet_feeding", "bed_mesh_max", "bed_mesh_min", "bed_mesh_probe_distance", "adaptive_bed_mesh_margin", "thumbnails"})
           toggle_line(el, !is_BBL_printer);
 
+        bool is_pellet_printer = m_config->opt_bool("pellet_modded_printer");
+        auto gcf               = m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value;
+        toggle_line("use_active_pellet_feeding", is_pellet_printer && gcf == gcfKlipper);
+        toggle_line("use_extruder_rotation_volume", is_pellet_printer && gcf == gcfKlipper);
+
         auto cfg           = m_preset_bundle->printers.get_edited_preset().config;
         bool is_multi_zone = cfg.opt_bool("multi_zone");
         toggle_line("multi_zone_number", is_multi_zone);
@@ -4642,6 +4658,12 @@ void TabPrinter::toggle_options()
         //toggle_option("retraction_distances_when_cut", m_config->opt_bool("long_retractions_when_cut",i),i);
         
         toggle_option("travel_slope", m_config->opt_enum("z_hop_types", i) != ZHopType::zhtNormal, i);
+
+        bool is_pellet_printer = m_config->opt_bool("pellet_modded_printer");
+        bool use_active_pellet_feeding = m_config->opt_bool("use_active_pellet_feeding");
+        auto gcf               = m_config->option<ConfigOptionEnum<GCodeFlavor>>("gcode_flavor")->value;
+        toggle_option("active_feeder_motor_name", is_pellet_printer && gcf == gcfKlipper && use_active_pellet_feeding, i);
+        toggle_line("active_feeder_motor_name#0", is_pellet_printer && gcf == gcfKlipper && use_active_pellet_feeding);
     }
 
     if (m_active_page->title() == L("Motion ability")) {

From 3d2ef87b0307eeae94e5f6b2905f39a8069d8ae2 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 16:44:57 +0100
Subject: [PATCH 49/59] add SET_EXTRUDER_ROTATION_DISTANCE inside gcode

---
 src/libslic3r/GCode.cpp       |  8 ++++++++
 src/libslic3r/GCodeWriter.cpp | 30 ++++++++++++++++++++++++++++++
 src/libslic3r/GCodeWriter.hpp |  2 ++
 src/libslic3r/PrintConfig.cpp | 25 +++++++++++++------------
 4 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index 8f4492d341d..9dcd015f28a 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -6347,6 +6347,14 @@ std::string GCode::set_extruder(unsigned int extruder_id, double print_z, bool b
             m_pa_processor->resetPreviousPA(m_config.pressure_advance.get_at(extruder_id));
         }
 
+        if (m_config.use_extruder_rotation_volume.value) {
+            gcode += m_writer.add_rotation_volume(extruder_id, m_config.extruder_rotation_volume.get_at(extruder_id));
+            if (m_config.use_active_pellet_feeding.value) {
+                gcode += m_writer.add_rotation_volume(m_config.active_feeder_motor_name.get_at(extruder_id),
+                                                      m_config.mixing_stepper_rotation_volume.get_at(extruder_id));
+            }
+        }
+
         gcode += m_writer.toolchange(extruder_id);
         return gcode;
     }
diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp
index 08d73aa33bc..0b0a43a70e9 100644
--- a/src/libslic3r/GCodeWriter.cpp
+++ b/src/libslic3r/GCodeWriter.cpp
@@ -418,6 +418,36 @@ std::string GCodeWriter::toolchange(unsigned int extruder_id)
     return gcode.str();
 }
 
+std::string GCodeWriter::add_rotation_volume(unsigned int extruder_id, double value)
+{
+    std::ostringstream gcode;
+    if (FLAVOR_IS(gcfKlipper)) {
+        std::string name = "extruder";
+        if (extruder_id > 0)
+            name += std::to_string(extruder_id);
+        gcode << add_rotation_volume(name, value);
+    }
+
+    // TODO: support other flavors
+
+    return gcode.str();
+}
+
+std::string GCodeWriter::add_rotation_volume(const std::string &name, double value)
+{ 
+    std::ostringstream gcode;
+    if (FLAVOR_IS(gcfKlipper)) {
+        //https://www.klipper3d.org/it/G-Codes.html?h=set_ex#set_extruder_rotation_distance
+        gcode << "SET_EXTRUDER_ROTATION_DISTANCE";
+        gcode << " EXTRUDER=" << name;
+        gcode << " DISTANCE=" << value << "\n";
+    }
+
+    // TODO: support other flavors
+
+    return gcode.str(); 
+}
+
 std::string GCodeWriter::set_speed(double F, const std::string &comment, const std::string &cooling_marker)
 {
     assert(F > 0.);
diff --git a/src/libslic3r/GCodeWriter.hpp b/src/libslic3r/GCodeWriter.hpp
index c1ad4e86807..f7b5049b66a 100644
--- a/src/libslic3r/GCodeWriter.hpp
+++ b/src/libslic3r/GCodeWriter.hpp
@@ -65,6 +65,8 @@ class GCodeWriter {
     // printed with the same extruder.
     std::string toolchange_prefix() const;
     std::string toolchange(unsigned int extruder_id);
+    std::string add_rotation_volume(unsigned int extruder_id, double value);
+    std::string add_rotation_volume(const std::string& name, double value);
     std::string set_speed(double F, const std::string &comment = std::string(), const std::string &cooling_marker = std::string());
     // SoftFever NOTE: the returned speed is mm/minute
     double      get_current_speed() const { return m_current_speed;}
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 0ffe9b29874..af354d61fb6 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1965,18 +1965,19 @@ void PrintConfigDef::init_fff_params()
     def->min = 0;
     def->set_default_value(new ConfigOptionFloats{ 0.4157 });
 
-    def          = this->add("extruder_rotation_volume", coFloat);
-    def->label   = L("Extruder rotation volume");
-    def->tooltip = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
+    def           = this->add("extruder_rotation_volume", coFloats);
+    def->label    = L("Extruder rotation volume");
+    def->tooltip  = L("The volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is crucial for configuring precise extrusion settings during printing.");
     def->sidetext = L("mm³");
-    def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(456));    
+    def->min      = 0;
+    def->set_default_value(new ConfigOptionFloats{456});    
     
-    def          = this->add("mixing_stepper_rotation_volume", coFloat);
-    def->label   = L("Mixing stepper rotation volume");
-    def->tooltip = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
-    def->min     = 0;
-    def->set_default_value(new ConfigOptionFloat(6000));
+    def           = this->add("mixing_stepper_rotation_volume", coFloats);
+    def->label    = L("Mixing stepper rotation volume");
+    def->tooltip  = L("The value controlling how much material is actively fed into the extruder by the feeding mechanism. Used for fine-tuning the material flow in multi-material or pellet-based printing.");
+    def->sidetext = L("mm³");
+    def->min      = 0;
+    def->set_default_value(new ConfigOptionFloats{6000});
 
     def = this->add("filament_shrink", coPercents);
     def->label = L("Shrinkage (XY)");
@@ -2892,11 +2893,11 @@ void PrintConfigDef::init_fff_params()
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(true));
     
-    def          = this->add("active_feeder_motor_name", coString);
+    def          = this->add("active_feeder_motor_name", coStrings);
     def->label   = L("Active feeder motor name");
     def->tooltip = "Name that identify the feeder motor";
     def->mode    = comAdvanced;
-    def->set_default_value(new ConfigOptionString(""));
+    def->set_default_value(new ConfigOptionStrings());
 
         
     def          = this->add("use_active_pellet_feeding", coBool);

From edcbe102d30da7c8429910da0715bce1dce6ae27 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 16:08:54 +0100
Subject: [PATCH 50/59] add SET_EXTRUDER_ROTATION_DISTANCE inside gcode

---
 src/libslic3r/PrintConfig.hpp | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp
index cdf9b62b036..69235456dd5 100644
--- a/src/libslic3r/PrintConfig.hpp
+++ b/src/libslic3r/PrintConfig.hpp
@@ -1169,9 +1169,16 @@ PRINT_CONFIG_CLASS_DEFINE(
     ((ConfigOptionBool,                support_multi_bed_types))
 
     // Small Area Infill Flow Compensation
-    ((ConfigOptionStrings,              small_area_infill_flow_compensation_model))
+    ((ConfigOptionStrings,             small_area_infill_flow_compensation_model))
 
     ((ConfigOptionBool,                has_scarf_joint_seam))
+
+    ((ConfigOptionBool,                use_extruder_rotation_volume))
+    ((ConfigOptionBool,                use_active_pellet_feeding))
+    ((ConfigOptionStrings,             active_feeder_motor_name))
+    ((ConfigOptionFloats,              extruder_rotation_volume))
+    ((ConfigOptionFloats,              mixing_stepper_rotation_volume))
+
 )
 
 // This object is mapped to Perl as Slic3r::Config::Print.

From ba0b91292a5ba8683e8fd3f61cb8f5ca5d91c68b Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 16:47:01 +0100
Subject: [PATCH 51/59] add doc e fix multi material mode

---
 doc/Pellet-modded-printer.md   | 65 ++++++++++++++++++++++++++++++++++
 doc/pellet-flow-coefficient.md | 33 -----------------
 src/libslic3r/PrintConfig.cpp  |  2 +-
 src/slic3r/GUI/Tab.cpp         |  2 ++
 4 files changed, 68 insertions(+), 34 deletions(-)
 create mode 100644 doc/Pellet-modded-printer.md
 delete mode 100644 doc/pellet-flow-coefficient.md

diff --git a/doc/Pellet-modded-printer.md b/doc/Pellet-modded-printer.md
new file mode 100644
index 00000000000..872710dd196
--- /dev/null
+++ b/doc/Pellet-modded-printer.md
@@ -0,0 +1,65 @@
+# Pellet modded printer
+Le stampanti 3D a pellet, comunemente utilizzate per stampe di grandi dimensioni (solitamente superiori a 1m³), si basano su una tecnologia simile alla stampa FDM. Tuttavia, anziché utilizzare filamenti, queste stampanti impiegano pellet come materiale di stampa.
+L'uso dei pellet comporta una gestione dell'estrusione diversa rispetto alle stampanti a filamento tradizionali, a causa di:
+
+- La presenza di aria tra i pellet.
+- Dimensioni variabili del particolato a seconda del materiale.
+- Necessità di sistemi di alimentazione attivi.
+
+Questo richiede parametri aggiuntivi per una corretta configurazione dell'estrusione.
+
+## pellet flow coefficient
+Il pellet flow coefficient è un parametro che rappresenta la capacità di estrusione dei pellet, influenzata da fattori quali:
+
+- Forma del pellet.
+- Tipo di materiale.
+- Viscosità del materiale.
+
+### Funzionamento
+Questo valore definisce la quantità di materiale estruso per ogni giro del meccanismo di alimentazione. Internamente, il coefficiente viene convertito in un valore equivalente di `filament_diameter` per garantire compatibilità con i calcoli volumetrici standard FDM.
+
+La formula utilizzata è: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
+
+- Maggiore densità di riempimento → Maggior materiale estruso → Coefficiente di flusso più alto → Simulazione di un filamento con diametro maggiore.
+- Una riduzione del coefficiente del 20% corrisponde a una riduzione lineare del flusso del 20%.
+
+In stampanti dove non è possibile regolare la distanza di rotazione del motore dell'estrusore, il pellet_flow_coefficient permette di controllare la percentuale di flusso modificando il diametro del filamento simulato.
+
+>**ATTENZIONE:** Modulare l'estrusione modificando il diametro del filamento virtuale causa tuttavia un errore di lettura della quantità estrusa dalla stampante all'interno del firmware utilizzato.
+Ad esempio su un firmware klipper si avrà una lettura a schermo del flusso di stampa differente da quello realmente in corso.
+utilizzare questo metodo causa anche problemi con il valore di retraction e unretraction, in quanto la conversione col filamneto virtuale altera i valori reali. 
+
+
+
+## Extruder Rotation Volume
+La extruder rotation volume rappresenta il volume di materiale estruso (in mm³) per ogni giro completo del motore dell'estrusore. Questo parametro offre una maggiore precisione nella configurazione rispetto al pellet flow coefficient, eliminando errori di calcolo dovuti alla simulazione del diametro del filamento virtuale.
+
+### Configurazione tramite Filamento Virtuale con Area di 1 mm²
+Per semplificare ulteriormente il calcolo del volume estruso e sincronizzare i parametri della stampante con i valori di volume nel G-code, è possibile simulare un filamento virtuale con un'area trasversale di 1 mm². In questo modo, i valori di estrusione 𝐸 nel G-code rappresentano direttamente il volume in mm³.
+
+#### Passaggi per l'implementazione
+1. **Impostazione del Pellet Flow Coefficient:** Simulare un filamento con un'area trasversale di 1 mm² impostando il pellet flow coefficent ad 1.
+2. **Configurazione della Extruder Rotation Volume:** Determina quanti mm³ di materiale vengono estrusi per ogni giro completo del motore dell'estrusore. Questo parametro dipende dalla geometria della vite o dell'ingranaggio dell'estrusore e può essere calibrato sperimentalmente.
+Inserisci il valore ottenuto nella configurazione del materiale come extruder rotation volume.
+3. **Imposta il filament_diameter** pari a 1.1284 all'interno del firmware della proprio stampante
+
+### Vantaggi del Sistema
+- Eliminazione degli errori di conversione: Non è necessario simulare filamenti di diverso diametro, riducendo gli errori.
+- Maggiore precisione: L'utilizzo del volume estruso diretto nel G-code rende la calibrazione più semplice e accurata.
+- Compatibilità dinamica: Con firmware come Klipper, puoi aggiornare i parametri in tempo reale senza dover riscrivere il G-code.
+
+>**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
+
+
+
+## Mixing Stepper Rotation Volume
+La mixing stepper rotation volume indica il volume di materiale (in mm³) immesso attivamente nell'estrusore tramite un motore dedicato.
+
+### Utilizzo
+Per utilizzare questa funzionalità, è necessario:
+
+- Abilitare l'opzione nelle impostazioni della stampante.
+- Definire il nome identificativo del motore che gestisce il feeding nelle impostazioni dell'estrusore.
+- Configurare il valore di mixing_stepper_rotation_volume nelle impostazioni del materiale.
+
+>**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
\ No newline at end of file
diff --git a/doc/pellet-flow-coefficient.md b/doc/pellet-flow-coefficient.md
deleted file mode 100644
index 87df0316b70..00000000000
--- a/doc/pellet-flow-coefficient.md
+++ /dev/null
@@ -1,33 +0,0 @@
-# Pellet Flow Coefficient
-## Introduction
-Pellet 3D printers, commonly used for print volumes around 1m³, rely on technology similar to FDM printing. However, instead of using filaments, these printers utilize pellets as the printing material.
-
-The main difference compared to filament-based printing lies in the fact that, while filament_diameter is a fixed value used to calculate the volume of extruded material, pellets require a specific coefficient: the pellet_flow_coefficient. This coefficient is empirically derived for a particular type of pellet and printer configuration.
-
-## Pellet Flow Coefficient
-The pellet_flow_coefficient is a value about pellets extrusion capacity, influenced by factors such as shape, material, and individual material viscosity. This value determines how much material is extruded per turn of the printer's feeding mechanism.
-
-Internally, the pellet_flow_coefficient is translated into an equivalent filament_diameter value to maintain compatibility with traditional volumetric calculations used in FDM printing. The formula is:
-
-*filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
-
-### Relationship Between Pellet Flow Coefficient and Material Flow
-- Higher packing density → More material extruded per turn → Higher pellet_flow_coefficient → Simulated as a filament with a larger diameter.
-- Reducing the pellet_flow_coefficient by 20% is equivalent to decreasing the extrusion flow by 20%.
-
-### Advantages of Pellet Flow Coefficient
-- If the rotation distance is fixed, the pellet_flow_coefficient allows control over the extruder’s flow percentage without modifying the simulated filament diameter.
-- For printers that support dynamic modification of the rotation distance (e.g., with Klipper using the `SET_ROTATION_DISTANCE` command), the pellet_flow_coefficient can be set to 1, and the rotation distance becomes the reference value for extruded volume.
-
-## Extruder Rotation Distance
-The rotation distance represents the volume of material extruded (in mm³) for each full turn of the extruder motor. This parameter is essential for accurately configuring the printer to achieve precise prints.
-
-### Usage
-To use this value during printing, it must be explicitly called within the startup script `START_PRINT`.
-
-## Mixing Stepper Rotation Distance
-The mixing stepper rotation distance is the value that controls how much material is actively fed into the extruder by the feeding mechanism.
-
-### Usage
-This parameter also needs to be explicitly called in the startup script `START_PRINT` to correctly configure the material flow during printing.
-
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index af354d61fb6..f9c29c31765 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2889,7 +2889,7 @@ void PrintConfigDef::init_fff_params()
 
     def          = this->add("use_extruder_rotation_volume", coBool);
     def->label   = L("Use extruder rotation volume");
-    def->tooltip = L("Use extruder rotation volume instead of the pellet flow coefficent");
+    def->tooltip = L("Enable extruder rotation volume in material settings");
     def->mode    = comSimple;
     def->set_default_value(new ConfigOptionBool(true));
     
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 0164b8ee1d0..6eed308e9c0 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3645,6 +3645,7 @@ void TabFilament::toggle_options()
 
         toggle_line("extruder_rotation_volume", is_pellet_printer);
         toggle_line("mixing_stepper_rotation_volume", is_pellet_printer);
+        toggle_line("pellet_flow_coefficient", is_pellet_printer);
 
         bool use_active_pellet_feeding = cfg.opt_bool("use_active_pellet_feeding");
         toggle_line("mixing_stepper_rotation_volume", is_pellet_printer && use_active_pellet_feeding);
@@ -3652,6 +3653,7 @@ void TabFilament::toggle_options()
         bool use_extruder_rotation_volume = cfg.opt_bool("use_extruder_rotation_volume");
         toggle_line("extruder_rotation_volume", is_pellet_printer && use_extruder_rotation_volume);
         toggle_line("pellet_flow_coefficient", is_pellet_printer && !use_extruder_rotation_volume);
+        
         if (is_pellet_printer) {
             m_config->set_key_value("filament_diameter", new ConfigOptionFloats{sqrt(4 / PI)});
         }

From 60bcced27233765d5b1081158c1a4f9cc09d91a0 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 18:57:38 +0100
Subject: [PATCH 52/59] add doc e fix multi material mode

---
 src/libslic3r/GCode.cpp | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp
index 9dcd015f28a..5b09a9357cc 100644
--- a/src/libslic3r/GCode.cpp
+++ b/src/libslic3r/GCode.cpp
@@ -6561,6 +6561,14 @@ std::string GCode::set_extruder(unsigned int extruder_id, double print_z, bool b
         gcode += m_writer.set_pressure_advance(m_config.pressure_advance.get_at(extruder_id));
     }
 
+    if (m_config.use_extruder_rotation_volume.value) {
+        gcode += m_writer.add_rotation_volume(extruder_id, m_config.extruder_rotation_volume.get_at(extruder_id));
+        if (m_config.use_active_pellet_feeding.value) {
+            gcode += m_writer.add_rotation_volume(m_config.active_feeder_motor_name.get_at(extruder_id),
+                m_config.mixing_stepper_rotation_volume.get_at(extruder_id));
+        }
+    }
+
     return gcode;
 }
 

From 2ec5eed410cfc801b9f670df3747f23643007876 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 19:01:18 +0100
Subject: [PATCH 53/59] fix doc reference

---
 src/slic3r/GUI/Tab.cpp | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 6eed308e9c0..216238664a6 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3302,9 +3302,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("extruder_rotation_volume", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_flow_coefficient"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("extruder_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume"' "Pellet-modded-printer");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3790,9 +3790,9 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("use_extruder_rotation_volume", "pellet-flow-coefficient");
-        optgroup->append_single_option_line("use_active_pellet_feeding", "pellet-flow-coefficient");
+        optgroup->append_single_option_line("pellet_modded_printer"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_extruder_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_active_pellet_feeding"' "Pellet-modded-printer");
         optgroup->append_single_option_line("multi_zone", "pellet-flow-coefficient");
         optgroup->append_single_option_line("multi_zone_number", "pellet-flow-coefficient");
         optgroup->append_single_option_line("bbl_use_printhost");
@@ -4397,7 +4397,7 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
                 optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
-                optgroup->append_single_option_line("active_feeder_motor_name", "pellet-flow-coefficient", extruder_idx);
+                optgroup->append_single_option_line("active_feeder_motor_name"' "Pellet-modded-printer", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 

From 1df71b7a1c60e6c819eac7ec6775146abb3b6960 Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Sat, 7 Dec 2024 19:02:12 +0100
Subject: [PATCH 54/59] fix typo

---
 src/slic3r/GUI/Tab.cpp | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 216238664a6..bb3db587d43 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3302,9 +3302,9 @@ void TabFilament::build()
 
         // Orca: New section to focus on flow rate and PA to declutter general section
         optgroup = page->new_optgroup(L("Flow ratio and Pressure Advance"), L"param_information");
-        optgroup->append_single_option_line("pellet_flow_coefficient"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("extruder_rotation_volume"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("mixing_stepper_rotation_volume"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("pellet_flow_coefficient", "Pellet-modded-printer");
+        optgroup->append_single_option_line("extruder_rotation_volume", "Pellet-modded-printer");
+        optgroup->append_single_option_line("mixing_stepper_rotation_volume", "Pellet-modded-printer");
         optgroup->append_single_option_line("filament_flow_ratio");
 
         optgroup->append_single_option_line("enable_pressure_advance");
@@ -3790,9 +3790,9 @@ void TabPrinter::build_fff()
         optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
         optgroup->append_single_option_line("printer_structure");
         optgroup->append_single_option_line("gcode_flavor");
-        optgroup->append_single_option_line("pellet_modded_printer"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("use_extruder_rotation_volume"' "Pellet-modded-printer");
-        optgroup->append_single_option_line("use_active_pellet_feeding"' "Pellet-modded-printer");
+        optgroup->append_single_option_line("pellet_modded_printer", "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_extruder_rotation_volume", "Pellet-modded-printer");
+        optgroup->append_single_option_line("use_active_pellet_feeding", "Pellet-modded-printer");
         optgroup->append_single_option_line("multi_zone", "pellet-flow-coefficient");
         optgroup->append_single_option_line("multi_zone_number", "pellet-flow-coefficient");
         optgroup->append_single_option_line("bbl_use_printhost");
@@ -4397,7 +4397,7 @@ if (is_marlin_flavor)
                 optgroup->append_single_option_line("retraction_distances_when_cut", "", extruder_idx);
 
                 optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
-                optgroup->append_single_option_line("active_feeder_motor_name"' "Pellet-modded-printer", extruder_idx);
+                optgroup->append_single_option_line("active_feeder_motor_name", "Pellet-modded-printer", extruder_idx);
     #if 0
                 //optgroup = page->new_optgroup(L("Preview"), -1, true);
 

From 1cc29c08c9ce42471ed6286d9a702794c0792792 Mon Sep 17 00:00:00 2001
From: GiacomoGuaresi <36533859+GiacomoGuaresi@users.noreply.github.com>
Date: Sat, 14 Dec 2024 14:45:17 +0100
Subject: [PATCH 55/59] Update Pellet-modded-printer.md

---
 doc/Pellet-modded-printer.md | 82 +++++++++++++++++-------------------
 1 file changed, 39 insertions(+), 43 deletions(-)

diff --git a/doc/Pellet-modded-printer.md b/doc/Pellet-modded-printer.md
index 872710dd196..a0844c306de 100644
--- a/doc/Pellet-modded-printer.md
+++ b/doc/Pellet-modded-printer.md
@@ -1,65 +1,61 @@
 # Pellet modded printer
-Le stampanti 3D a pellet, comunemente utilizzate per stampe di grandi dimensioni (solitamente superiori a 1m³), si basano su una tecnologia simile alla stampa FDM. Tuttavia, anziché utilizzare filamenti, queste stampanti impiegano pellet come materiale di stampa.
-L'uso dei pellet comporta una gestione dell'estrusione diversa rispetto alle stampanti a filamento tradizionali, a causa di:
+Pellet 3D printers, commonly used for large prints (usually larger than 1m³), are based on a technology similar to FDM printing. However, instead of using filaments, these printers use pellets as the printing material.
+The use of pellets requires a different extrusion management compared to traditional filament printers, due to:
 
-- La presenza di aria tra i pellet.
-- Dimensioni variabili del particolato a seconda del materiale.
-- Necessità di sistemi di alimentazione attivi.
+- The presence of air between the pellets.
+- Variable particle size depending on the material.
+- Need for active feeding systems.
 
-Questo richiede parametri aggiuntivi per una corretta configurazione dell'estrusione.
+This requires additional parameters for a correct extrusion configuration.
 
 ## pellet flow coefficient
-Il pellet flow coefficient è un parametro che rappresenta la capacità di estrusione dei pellet, influenzata da fattori quali:
+The pellet flow coefficient is a parameter that represents the extrusion capacity of the pellets, influenced by factors such as:
 
-- Forma del pellet.
-- Tipo di materiale.
-- Viscosità del materiale.
+- Shape of the pellet.
+- Type of material.
+- Viscosity of the material.
 
-### Funzionamento
-Questo valore definisce la quantità di materiale estruso per ogni giro del meccanismo di alimentazione. Internamente, il coefficiente viene convertito in un valore equivalente di `filament_diameter` per garantire compatibilità con i calcoli volumetrici standard FDM.
+### Operation
+This value defines the amount of material extruded for each revolution of the feeding mechanism. Internally, the coefficient is converted to an equivalent value of `filament_diameter` to ensure compatibility with standard FDM volumetric calculations.
 
-La formula utilizzata è: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
+The formula used is: *filament_diameter = sqrt( (4 \* pellet_flow_coefficient) / PI )*
 
-- Maggiore densità di riempimento → Maggior materiale estruso → Coefficiente di flusso più alto → Simulazione di un filamento con diametro maggiore.
-- Una riduzione del coefficiente del 20% corrisponde a una riduzione lineare del flusso del 20%.
-
-In stampanti dove non è possibile regolare la distanza di rotazione del motore dell'estrusore, il pellet_flow_coefficient permette di controllare la percentuale di flusso modificando il diametro del filamento simulato.
-
->**ATTENZIONE:** Modulare l'estrusione modificando il diametro del filamento virtuale causa tuttavia un errore di lettura della quantità estrusa dalla stampante all'interno del firmware utilizzato.
-Ad esempio su un firmware klipper si avrà una lettura a schermo del flusso di stampa differente da quello realmente in corso.
-utilizzare questo metodo causa anche problemi con il valore di retraction e unretraction, in quanto la conversione col filamneto virtuale altera i valori reali. 
+- Higher infill density → More extruded material → Higher flow coefficient → Simulation of a larger diameter filament.
+- A 20% reduction in the coefficient corresponds to a 20% linear reduction in flow.
 
+In printers where it is not possible to adjust the rotation distance of the extruder motor, the pellet_flow_coefficient allows you to control the flow rate by changing the diameter of the simulated filament.
 
+>**WARNING:** Modulating the extrusion by changing the diameter of the virtual filament causes an error in reading the quantity extruded by the printer within the firmware used.
+For example, on a klipper firmware you will have a different reading of the print flow on the screen than the one actually in progress.
+using this method also causes problems with the retraction and unretraction value, as the conversion with the virtual filament alters the real values.
 
 ## Extruder Rotation Volume
-La extruder rotation volume rappresenta il volume di materiale estruso (in mm³) per ogni giro completo del motore dell'estrusore. Questo parametro offre una maggiore precisione nella configurazione rispetto al pellet flow coefficient, eliminando errori di calcolo dovuti alla simulazione del diametro del filamento virtuale.
-
-### Configurazione tramite Filamento Virtuale con Area di 1 mm²
-Per semplificare ulteriormente il calcolo del volume estruso e sincronizzare i parametri della stampante con i valori di volume nel G-code, è possibile simulare un filamento virtuale con un'area trasversale di 1 mm². In questo modo, i valori di estrusione 𝐸 nel G-code rappresentano direttamente il volume in mm³.
-
-#### Passaggi per l'implementazione
-1. **Impostazione del Pellet Flow Coefficient:** Simulare un filamento con un'area trasversale di 1 mm² impostando il pellet flow coefficent ad 1.
-2. **Configurazione della Extruder Rotation Volume:** Determina quanti mm³ di materiale vengono estrusi per ogni giro completo del motore dell'estrusore. Questo parametro dipende dalla geometria della vite o dell'ingranaggio dell'estrusore e può essere calibrato sperimentalmente.
-Inserisci il valore ottenuto nella configurazione del materiale come extruder rotation volume.
-3. **Imposta il filament_diameter** pari a 1.1284 all'interno del firmware della proprio stampante
+The extruder rotation volume represents the volume of material extruded (in mm³) for each complete revolution of the extruder motor. This parameter offers greater precision in the configuration compared to the pellet flow coefficient, eliminating calculation errors due to the simulation of the virtual filament diameter.
 
-### Vantaggi del Sistema
-- Eliminazione degli errori di conversione: Non è necessario simulare filamenti di diverso diametro, riducendo gli errori.
-- Maggiore precisione: L'utilizzo del volume estruso diretto nel G-code rende la calibrazione più semplice e accurata.
-- Compatibilità dinamica: Con firmware come Klipper, puoi aggiornare i parametri in tempo reale senza dover riscrivere il G-code.
+### Configuration via Virtual Filament with Area of ​​1 mm²
+To further simplify the calculation of the extruded volume and synchronize the printer parameters with the volume values ​​in the G-code, it is possible to simulate a virtual filament with a cross-sectional area of ​​1 mm². In this way, the extrusion values ​​𝐸 in the G-code directly represent the volume in mm³.
 
->**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
+#### Implementation steps
+1. **Setting the Pellet Flow Coefficient:** Simulate a filament with a cross-sectional area of ​​1 mm² by setting the pellet flow coefficent to 1.
+2. **Setting the Extruder Rotation Volume:** Determines how many mm³ of material are extruded for each complete revolution of the extruder motor. This parameter depends on the geometry of the extruder screw or gear and can be calibrated experimentally.
+Enter the obtained value in the material configuration as extruder rotation volume.
+3. **Set the filament_diameter** equal to 1.1284 within the firmware of your printer
 
+### System Benefits
+- Elimination of conversion errors: It is not necessary to simulate filaments of different diameters, reducing errors.
+- Greater precision: Using the direct extruded volume in the G-code makes calibration easier and more accurate.
+- Dynamic Compatibility: With firmware like Klipper, you can update parameters in real time without having to rewrite the G-code.
 
+>**ATTENTION:** This feature is currently only supported by printers with Klipper firmware. Make sure to check compatibility before proceeding with the configuration.
 
 ## Mixing Stepper Rotation Volume
-La mixing stepper rotation volume indica il volume di materiale (in mm³) immesso attivamente nell'estrusore tramite un motore dedicato.
+The mixing stepper rotation volume indicates the volume of material (in mm³) actively fed into the extruder via a dedicated motor.
 
-### Utilizzo
-Per utilizzare questa funzionalità, è necessario:
+### Usage
+To use this feature, you need to:
 
-- Abilitare l'opzione nelle impostazioni della stampante.
-- Definire il nome identificativo del motore che gestisce il feeding nelle impostazioni dell'estrusore.
-- Configurare il valore di mixing_stepper_rotation_volume nelle impostazioni del materiale.
+- Enable the option in the printer settings.
+- Define the identifying name of the motor that manages the feeding in the extruder settings.
+- Configure the value of mixing_stepper_rotation_volume in the material settings.
 
->**ATTENZIONE:** Questa funzionalità è attualmente supportata solo da stampanti con firmware Klipper. Assicurati di verificare la compatibilità prima di procedere con la configurazione.
\ No newline at end of file
+>**ATTENTION:** This feature is currently only supported by printers with Klipper firmware. Make sure to check compatibility before proceeding with the configuration.

From 992cf708ebf5e1ce1ce9374ca8137d436a11ee3b Mon Sep 17 00:00:00 2001
From: davi3012 <72559875+davi3012@users.noreply.github.com>
Date: Mon, 16 Dec 2024 17:22:02 +0100
Subject: [PATCH 56/59] upload artifact to gingeradditive/OrcaSlicer

---
 .github/workflows/build_orca.yml | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index ae855633d76..882abcb6470 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -138,7 +138,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
           asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
@@ -207,7 +207,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
           asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
@@ -218,7 +218,7 @@ jobs:
         if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
           asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
@@ -285,7 +285,7 @@ jobs:
           ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
           asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
@@ -296,7 +296,7 @@ jobs:
         if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
+          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
           asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
           asset_name: orca_custom_preset_tests.zip

From b7e674de651761f866b8f16f62b9e9ac20a03255 Mon Sep 17 00:00:00 2001
From: davi3012 <72559875+davi3012@users.noreply.github.com>
Date: Mon, 16 Dec 2024 17:25:17 +0100
Subject: [PATCH 57/59] change wiki to gingeradditive

---
 .github/workflows/publish_docs_to_wiki.yml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/.github/workflows/publish_docs_to_wiki.yml b/.github/workflows/publish_docs_to_wiki.yml
index 36ceb8e08c0..24361fee648 100644
--- a/.github/workflows/publish_docs_to_wiki.yml
+++ b/.github/workflows/publish_docs_to_wiki.yml
@@ -34,7 +34,7 @@ jobs:
         run: |
           git config --global user.name "$USER_NAME"
           git config --global user.email "$USER_NAME"@users.noreply.github.com
-          git clone https://"$USER_TOKEN"@github.com/SoftFever/"$REPOSITORY_NAME".wiki.git tmp_wiki
+          git clone https://"$USER_TOKEN"@github.com/gingeradditive/"$REPOSITORY_NAME".wiki.git tmp_wiki
       # 4. Synchronize differences between `doc` & `tmp_wiki`
       # 5. Push new Wiki content
       - name: Push main repo content to wiki

From 249f4ac6411ae146f4c49ba21eed2382bc750bdf Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 17:11:03 +0100
Subject: [PATCH 58/59] disable not windows build for Ginger orca fork

---
 .github/workflows/build_all.yml | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml
index f71148e6ede..fffc016f09d 100644
--- a/.github/workflows/build_all.yml
+++ b/.github/workflows/build_all.yml
@@ -47,13 +47,13 @@ jobs:
       fail-fast: false
       matrix:
         include:
-          - os: ubuntu-20.04
-          - os: ubuntu-24.04
+          # - os: ubuntu-20.04
+          # - os: ubuntu-24.04
           - os: windows-latest
-          - os: macos-14
-            arch: x86_64
-          - os: macos-14
-            arch: arm64
+          # - os: macos-14
+          #   arch: x86_64
+          # - os: macos-14
+          #   arch: arm64
     uses: ./.github/workflows/build_check_cache.yml
     with:
       os: ${{ matrix.os }}
@@ -70,7 +70,7 @@ jobs:
     # maybe i'm too dumb and fucked up to do CI. OH WELL :D -ppd
     - name: "Remove unneeded stuff to free disk space"
       run:
-        sudo rm -rf /usr/share/dotnet /opt/ghc "/usr/local/share/boost" "$AGENT_TOOLSDIRECTORY"
+        rm -rf /usr/share/dotnet /opt/ghc "/usr/local/share/boost" "$AGENT_TOOLSDIRECTORY"
     - uses: actions/checkout@v4
     - uses: flatpak/flatpak-github-actions/flatpak-builder@v6
       with:

From 1de27b13d11ee276b3488b67d2deb7fcbf19ceca Mon Sep 17 00:00:00 2001
From: Giacomo Guaresi <guaresi.giacomo@gmail.com>
Date: Tue, 17 Dec 2024 18:10:03 +0100
Subject: [PATCH 59/59] disable deploy steps

---
 .github/workflows/build_orca.yml | 108 +++++++++++++++----------------
 1 file changed, 54 insertions(+), 54 deletions(-)

diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml
index 882abcb6470..70e2170cec1 100644
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -134,16 +134,16 @@ jobs:
           name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}
           path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
 
-      - name: Deploy Mac release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+      # - name: Deploy Mac release
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
+      #     asset_name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
 
 # Windows
       - name: setup MSVC
@@ -203,27 +203,27 @@ jobs:
           name: PDB
           path: ${{ github.workspace }}/build/src/Release/Debug_PDB_${{ env.ver }}_for_developers_only.7z
 
-      - name: Deploy Windows release portable
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_content_type: application/x-zip-compressed
-          max_releases: 1
-
-      - name: Deploy Windows release installer
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
+      # - name: Deploy Windows release portable
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
+      #     asset_name: OrcaSlicer_Windows_${{ env.ver }}_portable.zip
+      #     asset_content_type: application/x-zip-compressed
+      #     max_releases: 1
+
+      # - name: Deploy Windows release installer
+      #   if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
+      #     asset_name: OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
+      #     asset_content_type: application/x-msdownload
+      #     max_releases: 1
 
 # Ubuntu
       - name: Install dependencies
@@ -279,26 +279,26 @@ jobs:
           name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
           path: './build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
 
-      - name: Deploy Ubuntu release
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
-        env:
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-
-      - name: Deploy orca_custom_preset_tests
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
-        uses: WebFreak001/deploy-nightly@v3.1.0
-        with:
-          upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
-          asset_name: orca_custom_preset_tests.zip
-          asset_content_type: application/octet-stream
-          max_releases: 1
+      # - name: Deploy Ubuntu release
+      #   if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
+      #   env:
+      #     ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ./build/OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
+      #     asset_name: OrcaSlicer_Linux${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
+
+      # - name: Deploy orca_custom_preset_tests
+      #   if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-20.04' }}
+      #   uses: WebFreak001/deploy-nightly@v3.1.0
+      #   with:
+      #     upload_url: https://uploads.github.com/repos/gingeradditive/OrcaSlicer/releases/137995723/assets{?name,label}
+      #     release_id: 137995723
+      #     asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
+      #     asset_name: orca_custom_preset_tests.zip
+      #     asset_content_type: application/octet-stream
+      #     max_releases: 1