Explanations for values of mode and mode_01

[adieball]

Hi

is there anywhere an explanation of the values of mode and mode_01?
The xls file with the list pof values is not helpful :-)

[svde]

From my notes in one of my scripts: # mode_01;31 00 FA 01 12 00 00;190;i;1;w # 0100 256 = standby # 0300 768 = heating # 0400 1024 = setback # 0500 1280 = summer # 0b00 2816 = automatic1 # 0c00 3072 = automatic2 # 1100 4352 = cooling #mode_01=`/home/stefan/can_progs/can_scan can0 680 180.0112 | grep "^value" | cut -d " " -f6 | cut -d ")" -f1` # mode;31 00 FA C0 F6;190;d;1;r # 0000 = standby, 0001 = heating, 0003 = defrost, 0004 = DHW #mode=`/home/stefan/can_progs/can_scan can0 680 180.c0f6 | grep "^value" | cut -d " " -f6 | cut -d ")" -f1` with kind regards, / met vriendelijke groet, Stefan van der Eijk

…

On Fri, Aug 23, 2019 at 5:11 PM Andre Dieball ***@***.***> wrote: Hi is there anywhere an explanation of the values of mode and mode_01? The xls file with the list pof values is not helpful :-) — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

[adieball]

ok, understood, mode is the general mode and mode_01 the current operating mode.
Mine shows mode = 0 and mode_01 = 5
it's currently set to "cooling"
how do I interpret the numbers:
---cut---

0100 256 = standby

0300 768 = heating

0400 1024 = setback

0500 1280 = summer

0b00 2816 = automatic1

0c00 3072 = automatic2

1100 4352 = cooling

[svde]

Right now my system is in summer mode:

If I retrieve the value using pyHPSU, this is the output:

$ pyHPSU.py -c mode_01
[{'name': 'mode_01', 'resp': '1280', 'timestamp': 1566641041.721531}]

With can_scan this is the output:
$ /home/stefan/can_progs/can_scan can0 680 180.0112
elster-kromschroeder can-bus address scanner and test utility
copyright (c) 2014 Jürg Müller, CH-5524

value: 0500 (PROGRAMMSCHALTER Warmwasser)

The pyHPSU output is decimal, can_scan is hexadecimal.