Question about step 3 and 4

[arthur-yh]

In step 3, set_ap(ssid, password) I change ssid=tello and password=tellotello in file formation.py. Then I do the following code python formation_setup.py and it returns like
sending command command from ('192.168.10.1', 8889): ok sending command ap tello tellotello from ('192.168.10.1', 8889): OK,drone will reboot in 3s
Then I run python multi_tello_test.py test_2_drones.txt, but it shows [Still_Searching]Trying to find Tello in subnets... all the time, no tello is detected. I build an wifi like this.

And my test_2_drones.txt is shown below:

do you know where the problem is? thanks!

[dwalker-uk]

Is the ssid and password for a wifi network you’ve already created via a router or similar? And is your laptop / computer connected to the same wifi network? Both must be true for ap mode to work.

[honda0510]

Try this version.

[Ache615]

In step 3, set_ap(ssid, password) I change ssid=tello and password=tellotello in file formation.py. Then I do the following code python formation_setup.py and it returns like
sending command command from ('192.168.10.1', 8889): ok sending command ap tello tellotello from ('192.168.10.1', 8889): OK,drone will reboot in 3s
Then I run python multi_tello_test.py test_2_drones.txt, but it shows [Still_Searching]Trying to find Tello in subnets... all the time, no tello is detected. I build an wifi like this.

And my test_2_drones.txt is shown below:

do you know where the problem is? thanks!

try to check your script，be sure that your SN numbers are correct.

[Nicanor354]

bonjour,
j'aimerais savoir si un adaptateur wifi est nécessaire pour piloter plusieurs drones ?