matRad_rayTracing.m

function radDepthV = matRad_rayTracing(stf,ct,V,rot_coordsV,lateralCutoff)
% matRad visualization of two-dimensional dose distributions on ct 
% including segmentation
% 
% call
%   radDepthV = matRad_rayTracing(stf,ct,V,rot_coordsV,lateralCutoff)
%
% input
%   stf:           matRad steering information struct of one beam
%   ct:            ct cube
%   V:             linear voxel indices e.g. of voxels inside patient.
%   rot_coordsV    coordinates in beams eye view inside the patient
%   lateralCutoff: lateral cut off used for ray tracing

%
% output
%   radDepthV:  radiological depth inside the patient
%
% References
%   [1] http://www.sciencedirect.com/science/article/pii/S1120179711001359
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Copyright 2015 the matRad development team. 
% 
% This file is part of the matRad project. It is subject to the license 
% terms in the LICENSE file found in the top-level directory of this 
% distribution and at https://github.com/e0404/matRad/LICENSES.txt. No part 
% of the matRad project, including this file, may be copied, modified, 
% propagated, or distributed except according to the terms contained in the 
% LICENSE file.
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% set up rad depth cube for results
radDepthCube = repmat({NaN*ones(ct.cubeDim)},ct.numOfCtScen);

% set up ray matrix direct behind last voxel
rayMx_bev_y = max(rot_coordsV(:,2)) + max([ct.resolution.x ct.resolution.y ct.resolution.z]);
rayMx_bev_y = rayMx_bev_y + stf.sourcePoint_bev(2);

% set up list with bev coordinates for calculation of radiological depth
coords = zeros(prod(ct.cubeDim),3);
coords(V,:) = rot_coordsV;

% calculate spacing of rays on ray matrix
rayMxSpacing = 1/sqrt(2) * min([ct.resolution.x ct.resolution.y ct.resolution.z]);

% define candidate ray matrix covering 1000x1000mm^2
numOfCandidateRays = 2 * ceil(500/rayMxSpacing) + 1;
candidateRayMx     = zeros(numOfCandidateRays);

% define coordinates
[candidateRaysCoords_X,candidateRaysCoords_Z] = meshgrid(rayMxSpacing*[floor(-500/rayMxSpacing):ceil(500/rayMxSpacing)]);

% check which rays should be used
for i = 1:stf.numOfRays
   
    ix = (candidateRaysCoords_X(:) - (1+rayMx_bev_y/stf.SAD)*stf.ray(i).rayPos_bev(1)).^2 + ...
         (candidateRaysCoords_Z(:) - (1+rayMx_bev_y/stf.SAD)*stf.ray(i).rayPos_bev(3)).^2 ...
           <= lateralCutoff^2;
    
    candidateRayMx(ix) = 1;
    
end

% set up ray matrix
rayMx_bev = [candidateRaysCoords_X(logical(candidateRayMx(:))) ...
             rayMx_bev_y*ones(sum(candidateRayMx(:)),1) ...  
             candidateRaysCoords_Z(logical(candidateRayMx(:)))];

%     figure,
%     for jj = 1:length(rayMx_bev)
%        plot(rayMx_bev(jj,1),rayMx_bev(jj,3),'rx'),hold on 
%     end

% Rotation matrix. Transposed because of row vectors
rotMat_vectors_T = transpose(matRad_getRotationMatrix(stf.gantryAngle,stf.couchAngle));

% rotate ray matrix from bev to world coordinates
rayMx_world = rayMx_bev * rotMat_vectors_T;

% criterium for ray selection
raySelection = rayMxSpacing/2;

% perform ray tracing over all rays
for i = 1:size(rayMx_world,1)

    % run siddon ray tracing algorithm
    [~,l,rho,~,ixHitVoxel] = matRad_siddonRayTracer(stf.isoCenter, ...
                                ct.resolution, ...
                                stf.sourcePoint, ...
                                rayMx_world(i,:), ...
                                ct.cube);

    % find voxels for which we should remember this tracing because this is    
    % the closest ray by projecting the voxel coordinates to the
    % intersection points with the ray matrix and checking if the distance 
    % in x and z direction is smaller than the resolution of the ray matrix
    scale_factor = (rayMx_bev_y - stf.sourcePoint_bev(2)) ./ ...
                   coords(ixHitVoxel,2);

    x_dist = coords(ixHitVoxel,1).*scale_factor - rayMx_bev(i,1);
    z_dist = coords(ixHitVoxel,3).*scale_factor - rayMx_bev(i,3);

    ixRememberFromCurrTracing = x_dist > -raySelection & x_dist <= raySelection ...
                              & z_dist > -raySelection & z_dist <= raySelection;

    if any(ixRememberFromCurrTracing) > 0

        for j = 1:ct.numOfCtScen
            % calc radiological depths

            % eq 14
            % It multiply voxel intersections with \rho values.
            d = l .* rho{j}; %Note. It is not a number "one"; it is the letter "l"

            % Calculate accumulated d sum.
            dCum = cumsum(d)-d/2;

            % write radiological depth for voxel which we want to remember
            radDepthCube{j}(ixHitVoxel(ixRememberFromCurrTracing)) = dCum(ixRememberFromCurrTracing);
        end
    end  
    
end

% only take voxel inside the patient
for i = 1:ct.numOfCtScen
    radDepthV{i} = radDepthCube{i}(V);
end