wdio.conf-crossbrowsertesting.js

exports.config = {
    //
    // ====================
    // Runner Configuration
    // ====================
    //
    // WebdriverIO allows it to run your tests in arbitrary locations (e.g. locally or
    // on a remote machine).
    runner: 'local',
    //
    // =====================
    // Server Configurations
    // =====================
    // Host address of the running Selenium server. This information is usually obsolete as
    // WebdriverIO automatically connects to localhost. Also, if you are using one of the
    // supported cloud services like Sauce Labs, Browserstack, or Testing Bot you don't
    // need to define host and port information because WebdriverIO can figure that out
    // according to your user and key information. However, if you are using a private Selenium
    // backend you should define the host address, port, and path here.
    //
    hostname: 'hub.crossbrowsertesting.com',
    port: 80,
    path: '/wd/hub',
    //
    // =================
    // Service Providers
    // =================
    // WebdriverIO supports Sauce Labs, Browserstack, and Testing Bot (other cloud providers
    // should work too though). These services define specific user and key (or access key)
    // values you need to put in here in order to connect to these services.
    //
    user: process.env.XBROWSERTESTING_USERNAME,
    key: process.env.XBROWSERTESTING_ACCESS_KEY,
    //
    // If you run your tests on SauceLabs you can specify the region you want to run your tests
    // in via the `region` property. Available short handles for regions are `us` (default) and `eu`.
    // These regions are used for the Sauce Labs VM cloud and the Sauce Labs Real Device Cloud.
    // If you don't provide the region it will default for the `us`

    //
    // ==================
    // Specify Test Files
    // ==================
    // Define which test specs should run. The pattern is relative to the directory
    // from which `wdio` was called. Notice that, if you are calling `wdio` from an
    // NPM script (see https://docs.npmjs.com/cli/run-script) then the current working
    // directory is where your package.json resides, so `wdio` will be called from there.
    //
    specs: [
        './webdriverio-tests/basic.js'
    ],
    // Patterns to exclude.
    exclude: [
        // 'path/to/excluded/files'
    ],
    //
    // ============
    // Capabilities
    // ============
    // Define your capabilities here. WebdriverIO can run multiple capabilities at the same
    // time. Depending on the number of capabilities, WebdriverIO launches several test
    // sessions. Within your capabilities you can overwrite the spec and exclude options in
    // order to group specific specs to a specific capability.
    //
    // First, you can define how many instances should be started at the same time. Let's
    // say you have 3 different capabilities (Chrome, Firefox, and Safari) and you have
    // set maxInstances to 1; wdio will spawn 3 processes. Therefore, if you have 10 spec
    // files and you set maxInstances to 10, all spec files will get tested at the same time
    // and 30 processes will get spawned. The property handles how many capabilities
    // from the same test should run tests.
    //
    maxInstances: 5,
    //
    // If you have trouble getting all important capabilities together, check out the
    // Sauce Labs platform configurator - a great tool to configure your capabilities:
    // https://docs.saucelabs.com/reference/platforms-configurator
    //
    capabilities: [
		// maxInstances can get overwritten per capability. So if you have an in-house Selenium
        // grid with only 5 firefox instances available you can make sure that not more than
		// 5 instances get started at a time.

		// If outputDir is provided WebdriverIO can capture driver session logs
        // it is possible to configure which logTypes to include/exclude.
        // excludeDriverLogs: ['*'], // pass '*' to exclude all driver session logs
        // excludeDriverLogs: ['bugreport', 'server'],

        // https://help.crossbrowsertesting.com/selenium-testing/getting-started/crossbrowsertesting-automation-capabilities/

		/*
		{
			browserName: 'Chrome',
			platform: 'Windows 10',
			version: 'latest',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Chrome',
			platform: 'Windows 10',
			version: 'latest-1',
			maxInstances: 5,
			record_video: true
		},/*
		{
			browserName: 'Firefox',
			platform: 'Windows 10',
			version: 'latest',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Firefox',
			platform: 'Windows 10',
			version: 'latest-1',
			maxInstances: 5,
			record_video: true
		},*/
		{
			browserName: 'MicrosoftEdge',
			platform: 'Windows 10',
			version: '18',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'MicrosoftEdge',
			platform: 'Windows 10',
			version: '17',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Internet Explorer',
			platform: 'Windows 10',
			version: '11',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Safari',
			platform: 'Mac OSX 10.14',
			version: '12',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Safari',
			platform: 'Mac OSX 10.13',
			version: '11',
			maxInstances: 5,
			record_video: true
		},
		{
			browserName: 'Safari',
			deviceName: 'iPad 6th Generation Simulator',
			platformVersion: '12.0',
			platformName: 'iOS',
			deviceOrientation: 'landscape',
			maxInstances: 5,
			record_video: true
		}
		/*
		{
			maxInstances: 5,
			browserName: 'safari'
		},*/
		/*,
		{
			maxInstances: 5,
			browserName: 'edge'
		}*/
	],
    //
    // ===================
    // Test Configurations
    // ===================
    // Define all options that are relevant for the WebdriverIO instance here
    //
    // Level of logging verbosity: trace | debug | info | warn | error | silent
    logLevel: 'error',
    //
    // Set specific log levels per logger
    // loggers:
    // - webdriver, webdriverio
    // - @wdio/applitools-service, @wdio/browserstack-service, @wdio/devtools-service, @wdio/sauce-service
    // - @wdio/mocha-framework, @wdio/jasmine-framework
    // - @wdio/local-runner, @wdio/lambda-runner
    // - @wdio/sumologic-reporter
    // - @wdio/cli, @wdio/config, @wdio/sync, @wdio/utils
    // Level of logging verbosity: trace | debug | info | warn | error | silent
    // logLevels: {
        // webdriver: 'info',
        // '@wdio/applitools-service': 'info'
    // },
    //
    // If you only want to run your tests until a specific amount of tests have failed use
    // bail (default is 0 - don't bail, run all tests).
    bail: 0,
    //
    // Set a base URL in order to shorten url command calls. If your `url` parameter starts
    // with `/`, the base url gets prepended, not including the path portion of your baseUrl.
    // If your `url` parameter starts without a scheme or `/` (like `some/path`), the base url
    // gets prepended directly.
    baseUrl: 'https://mfranzke.github.io/loading-attribute-polyfill/demo/',
    //
    // Default timeout for all waitFor* commands.
    waitforTimeout: 10000,
    //
    // Default timeout in milliseconds for request
    // if Selenium Grid doesn't send response
    connectionRetryTimeout: 90000,
    //
    // Default request retries count
    connectionRetryCount: 3,
    //
    // Test runner services
    // Services take over a specific job you don't want to take care of. They enhance
    // your test setup with almost no effort. Unlike plugins, they don't add new
    // commands. Instead, they hook themselves up into the test process.
    // services: [],//
    // Framework you want to run your specs with.
    // The following are supported: Mocha, Jasmine, and Cucumber
    // see also: https://webdriver.io/docs/frameworks.html
    //
    // Make sure you have the wdio adapter package for the specific framework installed
    // before running any tests.
    framework: 'mocha',
    //
    // The number of times to retry the entire specfile when it fails as a whole
    // specFileRetries: 1,
    //
    // Test reporter for stdout.
    // The only one supported by default is 'dot'
    // see also: https://webdriver.io/docs/dot-reporter.html
    reporters: ['dot'],

    //
    // Options to be passed to Mocha.
    // See the full list at http://mochajs.org/
    mochaOpts: {
        ui: 'bdd',
        timeout: 60000
    },
    //
    // =====
    // Hooks
    // =====
    // WebdriverIO provides several hooks you can use to interfere with the test process in order to enhance
    // it and to build services around it. You can either apply a single function or an array of
    // methods to it. If one of them returns with a promise, WebdriverIO will wait until that promise got
    // resolved to continue.
    /**
     * Gets executed once before all workers get launched.
     * @param {Object} config wdio configuration object
     * @param {Array.<Object>} capabilities list of capabilities details
     */
    // onPrepare: function (config, capabilities) {
    // },
    /**
     * Gets executed just before initialising the webdriver session and test framework. It allows you
     * to manipulate configurations depending on the capability or spec.
     * @param {Object} config wdio configuration object
     * @param {Array.<Object>} capabilities list of capabilities details
     * @param {Array.<String>} specs List of spec file paths that are to be run
     */
    // beforeSession: function (config, capabilities, specs) {
    // },
    /**
     * Gets executed before test execution begins. At this point you can access to all global
     * variables like `browser`. It is the perfect place to define custom commands.
     * @param {Array.<Object>} capabilities list of capabilities details
     * @param {Array.<String>} specs List of spec file paths that are to be run
     */
    // before: function (capabilities, specs) {
    // },
    /**
     * Runs before a WebdriverIO command gets executed.
     * @param {String} commandName hook command name
     * @param {Array} args arguments that command would receive
     */
    // beforeCommand: function (commandName, args) {
    // },

    /**
     * Hook that gets executed before the suite starts
     * @param {Object} suite suite details
     */
    // beforeSuite: function (suite) {
    // },
    /**
     * Function to be executed before a test (in Mocha/Jasmine) or a step (in Cucumber) starts.
     * @param {Object} test test details
     */
    // beforeTest: function (test) {
    // },
    /**
     * Hook that gets executed _before_ a hook within the suite starts (e.g. runs before calling
     * beforeEach in Mocha)
     */
    // beforeHook: function () {
    // },
    /**
     * Hook that gets executed _after_ a hook within the suite starts (e.g. runs after calling
     * afterEach in Mocha)
     */
    // afterHook: function () {
    // },
    /**
     * Function to be executed after a test (in Mocha/Jasmine) or a step (in Cucumber) starts.
     * @param {Object} test test details
     */
    // afterTest: function (test) {
    // },
    /**
     * Hook that gets executed after the suite has ended
     * @param {Object} suite suite details
     */
    // afterSuite: function (suite) {
    // },

    /**
     * Runs after a WebdriverIO command gets executed
     * @param {String} commandName hook command name
     * @param {Array} args arguments that command would receive
     * @param {Number} result 0 - command success, 1 - command error
     * @param {Object} error error object if any
     */
    // afterCommand: function (commandName, args, result, error) {
    // },
    /**
     * Gets executed after all tests are done. You still have access to all global variables from
     * the test.
     * @param {Number} result 0 - test pass, 1 - test fail
     * @param {Array.<Object>} capabilities list of capabilities details
     * @param {Array.<String>} specs List of spec file paths that ran
     */
    // after: function (result, capabilities, specs) {
    // },
    /**
     * Gets executed right after terminating the webdriver session.
     * @param {Object} config wdio configuration object
     * @param {Array.<Object>} capabilities list of capabilities details
     * @param {Array.<String>} specs List of spec file paths that ran
     */
    // afterSession: function (config, capabilities, specs) {
    // },
    /**
     * Gets executed after all workers got shut down and the process is about to exit.
     * @param {Object} exitCode 0 - success, 1 - fail
     * @param {Object} config wdio configuration object
     * @param {Array.<Object>} capabilities list of capabilities details
     * @param {<Object>} results object containing test results
     */
    // onComplete: function(exitCode, config, capabilities, results) {
    // },
    /**
    * Gets executed when a refresh happens.
    * @param {String} oldSessionId session ID of the old session
    * @param {String} newSessionId session ID of the new session
    */
    //onReload: function(oldSessionId, newSessionId) {
    //}
}