From 00f1b1934bf6d8843ba8f854b98ad9e6091b67bd Mon Sep 17 00:00:00 2001
From: Amadea <53259552+amadea-system@users.noreply.github.com>
Date: Sun, 27 Feb 2022 18:35:58 -0500
Subject: [PATCH] Switch electronics cooling fan from a `heater_fan` to a
 `controller_fan`

Switch to using the `controller_fan` module for the electronics cooling fans on the SKR1.3, SKR1.4, & Spider Klipper Configs
---
 .../klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg     | 2 +-
 .../klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg     | 2 +-
 firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
index 40ea050e..dfb131ab 100644
--- a/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
+++ b/firmware/klipper_configurations/SKR_1.3/Voron2_SKR_13_Config.cfg
@@ -374,7 +374,7 @@ kick_start_time: 0.5
 ##	if your fan is not able to slow down effectively
 off_below: 0.10
 
-[heater_fan controller_fan]
+[controller_fan controller_fan]
 ##	Controller fan - Z board, HE1 Connector
 pin: z:P2.4
 kick_start_time: 0.5
diff --git a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
index d742667e..9d36b8c6 100644
--- a/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
+++ b/firmware/klipper_configurations/SKR_1.4/Voron2_SKR_14_Config.cfg
@@ -374,7 +374,7 @@ kick_start_time: 0.5
 ##	if your fan is not able to slow down effectively
 off_below: 0.10
 
-[heater_fan controller_fan]
+[controller_fan controller_fan]
 ##	Controller fan - Z board, HE1 Connector
 pin: z:P2.4
 kick_start_time: 0.5
diff --git a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
index dc6fa435..ff37016b 100644
--- a/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
+++ b/firmware/klipper_configurations/Spider/Voron2_Spider_Config.cfg
@@ -316,7 +316,7 @@ pin: PB1
 ##	if your fan is not able to slow down effectively
 off_below: 0.10
 
-[heater_fan controller_fan]
+[controller_fan controller_fan]
 ##	Controller fan - FAN2 Connector
 pin: PB2
 #kick_start_time: 0.5