Skip to content

Latest commit

 

History

History
350 lines (278 loc) · 13.6 KB

install_ipi.md

File metadata and controls

350 lines (278 loc) · 13.6 KB
Raw

Bare Metal IPI (Installer Provisioned Infrastructure) Overview

Current Status: Experimental

This document discusses the installer support for an IPI (Installer Provisioned Infrastructure) install for bare metal hosts. This includes platform support for the management of bare metal hosts, as well as some automation of DNS and load balancing to bring up the cluster.

The upstream project that provides Kubernetes-native management of bare metal hosts is metal3.io.

For UPI (User Provisioned Infrastructure) based instructions for bare metal deployments, see install_upi.md.

Prerequisites

Network Requirements

It is assumed that all hosts have at least 2 NICs, used for the following purposes:

  • NIC #1 - External Network

    • This network is the main network used by the cluster, including API traffic and application traffic.
    • DHCP
      • External DHCP is assumed on this network. It is strongly recommended to set up DHCP reservations for each of the hosts in the cluster to ensure that they retain stable IP addresses. The addresses assigned by DHCP need to be in the same subnet as the Virtual IPs discussed below.
      • A pool of dynamic addresses should also be available on this network, as the provisioning host and temporary bootstrap VM will also need addresses on this network.
    • NTP
      • A time source must be accessible from this network.
    • Reserved VIPs (Virtual IPs) - 3 IP addresses must be reserved on this network for use by the cluster. Specifically, these IPs will serve the following purposes:
      • API - This IP will be used to reach the cluster API.
      • Ingress - This IP will be used by cluster ingress traffic
      • DNS - This IP will be used internally by the cluster for automating internal DNS requirements.
    • External DNS - While the cluster automates the internal DNS requirements, two external DNS records must be created in whatever DNS server is appropriate for this environment.
      • api.<cluster-name>.<base-domain> - pointing to the API VIP
      • *.apps.<cluster-name>.<base-domain> - pointing to the Ingress VIP

  • NIC #2 - Provisioning Network

    • A private network used for PXE based provisioning.
    • You must specify provisioningNetworkInterface to indicate which interface is connected to this network.
    • DHCP is automated for this network by default, to rely on external DHCP, set the platform's provisioningDHCPExternal option to true
    • Addressing for this network defaults to 172.22.0.0/24, but is configurable by setting the provisioningNetworkCIDR option.
    • Two IP's are required to be available for use, one for the bootstrap host, and one as a provisioning IP in the running cluster. By default, these are the 2nd and 3rd addresses in the provisioningNetworkCIDR (e.g. 172.22.0.2, and 172.22.0.3).
    • To specify the name of the provisioning network interface, set the provisioningNetworkInterface option. This is the network interface on a master that is connected to the provisioning network.

  • Out-of-band Management Network

    • Servers will typically have an additional NIC used by the onboard management controllers (BMCs). These BMCs must be accessible and routed to the host.

Provisioning Host

The installer must be run from a host that is attached to the same networks as the cluster, as described in the previous section. We refer to this host as the provisioning host. The easiest way to provide a provisioning host is to use one of the hosts that is intended to later become a worker node in the same cluster. That way it is already connected to the proper networks.

It is recommended that the provisioning host be a bare metal host, as it must be able to use libvirt to launch the OpenShift bootstrap VM locally.

Supported Hardware

The architecture is intended to support a wide variety of hardware. This was one of the reasons Ironic is used as an underlying technology. However, so far development and testing has focused on PXE based provisioning using IPMI for out-of-band management of hosts. Other provisioning approaches will be added, tested, and documented over time.

Installation Process

Once an environment has been prepared according to the documented pre-requisites, the install process is the same as other IPI based platforms.

openshift-install create cluster

However, it is recommended to prepare an install-config.yaml file in advance, containing all of the details of the bare metal hosts to be provisioned.

Install Config

The install-config.yaml file requires some additional details. Most of the information is teaching the installer and the resulting cluster enough about the available hardware so that it is able to fully manage it. There are additional customizations possible.

Here is an example install-config.yaml with the required baremetal platform details.

IMPORTANT NOTE: The current install configuration for the baremetal platform should be considered experimental and still subject to change without backwards compatibility. In particular, some items likely to change soon include:

  • The hardwareProfile is currently exposed as a way to allow specifying different hardware parameters for deployment. By default, we will deploy RHCOS to the first disk, but that may not be appropriate for all hardware. The hardwareProfile is the field we have available to change that. This interface is subject to change. In the meantime, hardware profiles can be found here: https://github.com/metal3-io/baremetal-operator/blob/master/pkg/hardware/profile.go#L48
apiVersion: v1
baseDomain: test.metalkube.org
metadata:
  name: ostest
networking:
  machineNetwork:
  - cidr: 192.168.111.0/24
compute:
- name: worker
  replicas: 1
controlPlane:
  name: master
  replicas: 3
  platform:
    baremetal: {}
platform:
  baremetal:
    apiVIP: 192.168.111.5
    ingressVIP: 192.168.111.4
    dnsVIP: 192.168.111.3
    provisioningNetworkInterface: enp1s0
    hosts:
      - name: openshift-master-0
        role: master
        bmc:
          address: ipmi://192.168.111.1:6230
          username: admin
          password: password
        bootMACAddress: 00:11:07:4e:f6:68
        hardwareProfile: default
      - name: openshift-master-1
        role: master
        bmc:
          address: ipmi://192.168.111.1:6231
          username: admin
          password: password
        bootMACAddress: 00:11:07:4e:f6:6c
        hardwareProfile: default
      - name: openshift-master-2
        role: master
        bmc:
          address: ipmi://192.168.111.1:6232
          username: admin
          password: password
        bootMACAddress: 00:11:07:4e:f6:70
        hardwareProfile: default
      - name: openshift-worker-0
        role: worker
        bmc:
          address: ipmi://192.168.111.1:6233
          username: admin
          password: password
        bootMACAddress: 00:11:07:4e:f6:71
        hardwareProfile: default
pullSecret: ...
sshKey: ...

Required Inputs

Parameter Default Description
provisioningNetworkInterface The name of the network interface on control plane nodes connected to the provisioning network.
hosts Details about bare metal hosts to use to build the cluster. See below for more details.
defaultMachinePlatform The default configuration used for machine pools without a platform configuration.
apiVIP api.<clusterdomain> The VIP to use for internal API communication.
ingressVIP test.apps.<clusterdomain> The VIP to use for ingress traffic.
dnsVIP The VIP to use for internal DNS communication.
VIP Settings

The apiVIP and ingressVIP settings must either be provided or pre-configured in DNS so that the default names resolve correctly (see the defaults in the table above).

The dnsVIP setting has no default and must always be provided.

Describing Hosts

The hosts parameter is a list of separate bare metal assets that should be used to build the cluster.

Name Default Description
name The name of the BareMetalHost resource to associate with the details.
role Either master or worker.
bmc Connection details for the baseboard management controller. See below for details.
bootMACAddress The MAC address of the NIC the host will use to boot on the provisioning network.

The bmc parameter for each host is a set of values for accessing the baseboard management controller in the host.

Name Default Description
username The username for authenticating to the BMC
password The password associated with username.
address The URL for communicating with the BMC controller, based on the provider being used. See BMC Addressing for details.
BMC Addressing

The address field for each bmc entry is a URL with details for connecting to the controller, including the type of controller in the URL scheme and its location on the network.

IPMI hosts use ipmi://<host>:<port>. An unadorned <host>:<port> is also accepted. If the port is omitted, the default of 623 is used.

Dell iDRAC hosts use idrac:// (or idrac+http:// to disable TLS).

Fujitsu iRMC hosts use irmc://<host>:<port>, where <port> is optional if using the default.

For Redfish, use redfish:// (or redfish+http:// to disable TLS). The hostname (or IP address) and the path to the system ID are both required. For example redfish://myhost.example/redfish/v1/Systems/System.Embedded.1 or redfish://myhost.example/redfish/v1/Systems/1

Work in Progress

Integration of the baremetal platform is still a work-in-progress across various parts of OpenShift. This section discusses key items that are not yet fully integrated, and their workarounds.

Note that once this work moves into the openshift/installer repository, new issues will get created or existing issues will be moved to track these gaps instead of the leaving the existing issues against the KNI fork of the installer.

destroy cluster support

openshift-install destroy cluster is not supported for the baremetal platform.

openshift-metal3/kni-installer#74

install gather not supported

When an installation fails, openshift-install will attempt to gather debug information from hosts. This is not yet supported by the baremetal platform.

openshift-metal3/kni-installer#79

Provisioning subnet not fully configurable

There are some install-config parameters to control templating of the provisioning network configuration, but fully supporting alternative subnets for the provisioning network is incomplete.

openshift#2091

Troubleshooting

General troubleshooting for OpenShift installations can be found here.

Bootstrap

The bootstrap VM by default runs on the same host as the installer. This bootstrap VM runs the Ironic services needed to provision the control plane. Ironic being available is dependent on having successfully downloaded the machine OS and Ironic agent images. In some cases, this may fail, and the installer will report a timeout waiting for the Ironic API.

To login to the bootstrap VM, you will need to ssh to the VM using the core user, and the SSH key defined in your install config.

The VM obtains an IP address from your DHCP server on the external network. When using a development environment with dev-scripts, it uses the baremetal libvirt network unless an override is specified. The IP can be retrieved with virsh net-dhcp-leases baremetal. If the install is far enough along to have brought up the provisioning network, you may use the provisioning bootstrap IP which defaults to 172.22.0.2.

Viewing the virtual machine's console with virt-manager may also be helpful.

You can view the Ironic logs by sshing to the bootstrap VM, and examining the logs of the ironic service, journalctl -u ironic. You may also view the logs of the individual containers:

  • podman logs ipa-downloader
  • podman logs coreos-downloader
  • podman logs ironic
  • podman logs ironic-inspector
  • podman logs ironic-dnsmasq

Control Plane

Once Ironic is available, the installer will provision the three control plane hosts. For early failures, it may be useful to look at the console (using virt-manager if emulating baremetal with vbmc, or through the BMC like iDRAC) and see if there are any errors reported.

Additionally, if the cluster comes up enough that the bootstrap is destroyed, but commands like oc get clusteroperators shows degraded operators, it may be useful to examine the logs of the pods within the openshift-kni-infra namespace.

Ironic

You may want to examine Ironic itself and look at the state of the hosts. The below file, when named clouds.yaml and placed in the current working directory, can be used to communicate with Ironic using the openstack commandline utilities.

clouds:
  metal3-bootstrap:
    auth_type: none
    baremetal_endpoint_override: http://172.22.0.2:6385
    baremetal_introspection_endpoint_override: http://172.22.0.2:5050
  metal3:
    auth_type: none
    baremetal_endpoint_override: http://172.22.0.3:6385
    baremetal_introspection_endpoint_override: http://172.22.0.3:5050

If bootstrap is still up, you can use metal3-bootstrap, otherwise use metal3 to examine Ironic running in the control plane:

export OS_CLOUD=metal3-bootstrap
/usr/local/bin/openstack baremetal node list