Kerberos.io runs on every Linux based machine but its main goal is to run on a Raspberry Pi or other boards due to its low energy consumption. We provide multiple ways (KIOS, Raspbian, Armbian, Docker, etc) to install Kerberos.io on the device your prefer. If you will install Kerberos.io with Docker, or on your local Linux machine, nothing special should be purchased except a video camera.
We recommend to run Kerberos.io on a Raspberry Pi, as it is a very popluar microcontroller which can you buy in almost every (online) electronic shop. To simplify the lives of our Raspberry Pi users, Kerberos.io comes with a custom ARM OS called KIOS (Kerberos.io Operating System), which you can deploy to your Raspberry Pi in just a few minutes. Kerberos.io supports all Raspberry Pi versions: 1, 2, 3 and Zero (W).
Kerberos.io can also be installed on other boards by following the Armbian installation. At the moment of writing we don't have support for KiOS, so the installation is a little bit harder. This is a short list of microcontrollers on which we have tested Kerberos.io using the Armbian OS:
- PCDuino3 Nano (Allwinner A20)
- Orange Pi + (Allwinner H3)
Kerberos.io works with the full range of camera's. You can use an USB-, IP- or the Raspberry Pi camera (v1.3 and v2.1). When using the Raspberry Pi camera, you'll benefit from its hardware encoding which makes it possible to record video at 30 FPS on a Raspbery Pi Zero. If you want to use an IP camera, we recommend to use the RTSP connection if available; note that it's possible that cheap IP cameras will not work properly. USB camera's that need special drivers will probably NOT work.
