Minor cleanup

Author: microbuilder

libraries/Bluefruit52Lib/examples/Peripheral/hid_camerashutter/hid_camerashutter.ino

@@ -15,7 +15,7 @@
 /*
  * This sketch uses the HID Consumer Key API to send the Volume Down
  * key when PIN_SHUTTER is grounded. This will cause your mobile device
- * to capture a photo when you are in Camera App
+ * to capture a photo when you are in the camera app
  */
 #include <bluefruit.h>
 
@@ -24,10 +24,10 @@ BLEHidAdafruit blehid;
 
 #define PIN_SHUTTER   27
 
-void setup() 
+void setup()
 {
   pinMode(PIN_SHUTTER, INPUT_PULLUP);
-  
+
   Serial.begin(115200);
 
   Serial.println("Bluefruit52 HID Camera Shutter Example");
@@ -44,24 +44,24 @@ void setup()
   Bluefruit.begin();
   Bluefruit.setName("Bluefruit52");
 
-  // Configure and Start Device Information Service
+  // Configure and start DIS (Device Information Service)
   bledis.setManufacturer("Adafruit Industries");
   bledis.setModel("Bluefruit Feather 52");
   bledis.begin();
 
   /* Start BLE HID
    * Note: Apple requires BLE devices to have a min connection interval >= 20m
    * (The smaller the connection interval the faster we can send data).
-   * However for HID and MIDI device, Apple will accept a min connection interval 
-   * as low as 11.25 ms. Therefore BLEHidAdafruit::begin() will try to set
-   * the min and max connection interval to 11.25 ms and 15 ms respectively
+   * However, for HID and MIDI device Apple will accept a min connection
+   * interval as low as 11.25 ms. Therefore BLEHidAdafruit::begin() will try to
+   * set the min and max connection interval to 11.25 ms and 15 ms respectively
    * for the best performance.
    */
   blehid.begin();
 
   /* Set connection interval (min, max) to your perferred value.
    * Note: It is already set by BLEHidAdafruit::begin() to 11.25ms - 15ms
-   * min = 9*1.25=11.25 ms, max = 12*1.25= 15 ms 
+   * min = 9*1.25=11.25 ms, max = 12*1.25= 15 ms
    */
   /* Bluefruit.setConnInterval(9, 12); */
 
@@ -73,20 +73,20 @@ void setup()
 }
 
 void setupAdv(void)
-{  
+{
   Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
   Bluefruit.Advertising.addTxPower();
 
   Bluefruit.Advertising.addAppearance(BLE_APPEARANCE_HID_KEYBOARD);
-  
+
   // Include BLE HID service
   Bluefruit.Advertising.addService(blehid);
 
   // There is enough room for the dev name in the advertising packet
   Bluefruit.Advertising.addName();
 }
 
-void loop() 
+void loop()
 {
   // Make sure you are connected and bonded/paired
   if ( Bluefruit.connected() && Bluefruit.connPaired() )
@@ -96,14 +96,14 @@ void loop()
     {
       // Turn on red LED when we start sending data
       digitalWrite(LED_RED, 1);
-      
+
       // Send the 'volume down' key press
       // Check BLEHidGerneric.h for list of defined consumer usage codes
       blehid.consumerKeyPress(HID_USAGE_CONSUMER_VOLUME_DECREMENT);
 
       // Delay a bit between reports
       delay(10);
-      
+
       // Send key release
       blehid.consumerKeyRelease();