RGB MATRIX MULTI PANEL 64x32

[tahafathi2013]

Hi
im use arduino mega2560 and two 64x32 16s. all good fore one panel but when add new pane as series all of screen one showing on screen two.
i want show a text on screen one and new text on screen two.

how make this?
you have a example code for this?

im use this code :

// testshapes demo for RGBmatrixPanel library.
// Demonstrates the drawing abilities of the RGBmatrixPanel library.
// For 32x64 RGB LED matrix.

// WILL NOT FIT on ARDUINO UNO -- requires a Mega, M0 or M4 board

#include <RGBmatrixPanel.h>

// Most of the signal pins are configurable, but the CLK pin has some
// special constraints. On 8-bit AVR boards it must be on PORTB...
// Pin 11 works on the Arduino Mega. On 32-bit SAMD boards it must be
// on the same PORT as the RGB data pins (D2-D7)...
// Pin 8 works on the Adafruit Metro M0 or Arduino Zero,
// Pin A4 works on the Adafruit Metro M4 (if using the Adafruit RGB
// Matrix Shield, cut trace between CLK pads and run a wire to A4).

//#define CLK 8 // USE THIS ON ADAFRUIT METRO M0, etc.
//#define CLK A4 // USE THIS ON METRO M4 (not M0)
#define CLK 11 // USE THIS ON ARDUINO MEGA
#define OE 9
#define LAT 10
#define A A0
#define B A1
#define C A2
#define D A3

RGBmatrixPanel matrix(A, B, C, D, CLK, LAT, OE, false, 64);

void setup() {

matrix.begin();

// fill the screen with 'black'
matrix.fillScreen(matrix.Color333(0, 0, 0));

// draw some text!
matrix.setTextSize(1); // size 1 == 8 pixels high
matrix.setTextWrap(false); // Don't wrap at end of line - will do ourselves

matrix.setCursor(8, 0); // start at top left, with 8 pixel of spacing

matrix.println();
//matrix.setTextColor(matrix.Color333(4,4,4));
//matrix.println("Industries");
matrix.setTextColor(matrix.Color333(7,7,7));
matrix.println("TAHA FATHI");
}

void loop() {
// Do nothing -- image doesn't change
}

[marcmerlin]

I'm not sure that library supports multiple panels, but you can try https://github.com/pixelmatix/SmartMatrix