diff --git a/libraries/WiFiS3/examples/WiFiPagerServer/WiFiPagerServer.ino b/libraries/WiFiS3/examples/WiFiPagerServer/WiFiPagerServer.ino
new file mode 100755
index 000000000..a4fea78b2
--- /dev/null
+++ b/libraries/WiFiS3/examples/WiFiPagerServer/WiFiPagerServer.ino
@@ -0,0 +1,73 @@
+/*
+  WiFi Pager Server
+
+  The example is a simple server that echoes any incoming
+  messages to all connected clients. Connect two or more
+  telnet sessions to see how server.available() and
+  server.print() work.
+*/
+
+#include <WiFiS3.h>
+
+#include "arduino_secrets.h"
+///////please enter your sensitive data in the Secret tab/arduino_secrets.h
+char ssid[] = SECRET_SSID;        // your network SSID (name)
+char pass[] = SECRET_PASS;    // your network password (use for WPA, or use as key for WEP)
+
+int status = WL_IDLE_STATUS;
+
+WiFiServer server(23);
+
+void setup() {
+
+  //Initialize serial and wait for port to open:
+  Serial.begin(9600);
+  while (!Serial) {
+    ; // wait for serial port to connect. Needed for native USB port only
+  }
+
+  // check for the WiFi module:
+  if (WiFi.status() == WL_NO_MODULE) {
+    Serial.println("Communication with WiFi module failed!");
+    // don't continue
+    while (true);
+  }
+
+  String fv = WiFi.firmwareVersion();
+  if (fv < WIFI_FIRMWARE_LATEST_VERSION) {
+    Serial.println("Please upgrade the firmware");
+  }
+
+  // attempt to connect to WiFi network:
+  while (status != WL_CONNECTED) {
+    Serial.print("Attempting to connect to SSID: ");
+    Serial.println(ssid);
+    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
+    status = WiFi.begin(ssid, pass);
+
+    // wait 10 seconds for connection:
+    delay(10000);
+  }
+
+  server.begin();
+
+  IPAddress ip = WiFi.localIP();
+  Serial.println();
+  Serial.println("Connected to WiFi network.");
+  Serial.print("To access the server, connect with Telnet client to ");
+  Serial.print(ip);
+  Serial.println(" 23");
+}
+
+void loop() {
+
+  WiFiClient client = server.available(); // returns first client which has data to read or a 'false' client
+  if (client) { // client is true only if it is connected and has data to read
+    String s = client.readStringUntil('\n'); // read the message incoming from one of the clients
+    s.trim(); // trim eventual \r
+    Serial.println(s); // print the message to Serial Monitor
+    client.print("echo: "); // this is only for the sending client
+    server.println(s); // send the message to all connected clients
+    server.flush(); // flush the buffers
+  }
+}
diff --git a/libraries/WiFiS3/examples/WiFiPagerServer/arduino_secrets.h b/libraries/WiFiS3/examples/WiFiPagerServer/arduino_secrets.h
new file mode 100644
index 000000000..0c9fdd556
--- /dev/null
+++ b/libraries/WiFiS3/examples/WiFiPagerServer/arduino_secrets.h
@@ -0,0 +1,2 @@
+#define SECRET_SSID ""
+#define SECRET_PASS ""