diff --git a/i18n/af.json b/i18n/af.json index cf5ee6560..c6f4d2b10 100644 --- a/i18n/af.json +++ b/i18n/af.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Programeerder", + "reloadBoardData": "Reload Board Data", "reselectLater": "Herselekteer later", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Kies Bord", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "oplaai", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verifieer kode na oplaai ", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/ar.json b/i18n/ar.json index 3caadecc5..c0df39480 100644 --- a/i18n/ar.json +++ b/i18n/ar.json @@ -8,13 +8,14 @@ "goToCloudEditor": "الانتقال الى المحرر السحابي", "goToIoTCloud": "الانتقال الى سحابة الIoT", "goToProfile": "الانتقال الى ملف التعريف الشخصي", - "menuTitle": "Arduino Cloud" + "menuTitle": "الخدمة السحابية للأردوينو" }, "board": { "board": "اللوحة {0}", - "boardConfigDialogTitle": "أختر متحكم و منفذ مختلفين ", + "boardConfigDialogTitle": "اختر لوحة أخرى ومنفذها", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "معلومات اللوحة", - "boards": "المتحكمات", + "boards": "اللوحات", "configDialog1": "اختر لوحة و منفذ معا اذا اردت ان ترفع السكتش", "configDialog2": "اذا قمت باختيار لوحة فقط ستسطيع ان تترجم لكن بدون ان ترفع المشروع", "couldNotFindPreviouslySelected": "تعذر ايجاد اللوحة '{0}' المختارة مسبقا في المنصة المثبتة '{1}' . الرجاء اعادة اختيار اللوحة التي تريد استعمالها يدويا . هل تريد باعادة الاختيار الان؟", @@ -22,19 +23,21 @@ "getBoardInfo": "الحصول على معلومات اللوحة", "inSketchbook": "(داخل ملف المشاريع)", "installNow": "نواة \"{0} {1}\" يجب تثبيتها للوحة \"{2}\" التي تم اختيارها . هل تريد تثبيتها الان ؟", - "noBoardsFound": "لا يوجد لوحات ل \"{0}\"", + "noBoardsFound": "لم يتم العثور على لوحة لـ \"{0}\"", "noNativeSerialPort": "منفذ الاتصال التسلسلي الاساسي , تعذر الحصول على معلومات", - "noPortsDiscovered": "تعذر ايجاد منافذ", + "noPortsDiscovered": "لم يتم العثور على منفذ متصل", "nonSerialPort": "منفذ اتصال غير تسلسلي , تعذر الحصول على معلومات", "openBoardsConfig": "قم باختيار لوحة و منفذ مختلفين", "pleasePickBoard": "من فضلك اختر لوحة متصلة على المنفذ الذي اخترته", "port": "المنفذ {0}", "ports": "منافذ", "programmer": "المبرمجة", + "reloadBoardData": "Reload Board Data", "reselectLater": "اعد الاختيار لاحقا", "revertBoardsConfig": "استخدم '{0}' تعامل مع '{1}'", "searchBoard": "أبحث عن متحكم", "selectBoard": "اختر لوحة", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "الرجاء اختيار منفذ من اجل الحصول على معلومات اللوحة", "showAllAvailablePorts": "يظهر كل المنافذ المتاحة عند تفعيله", "showAllPorts": "أظهر جميع المنافذ", @@ -139,7 +142,7 @@ "installManually": "ثبّت يدويا", "later": "لاحقا", "noBoardSelected": "لم يتم اختيار اي لوحة", - "noSketchOpened": "No sketch opened", + "noSketchOpened": "لم يتم فتح صفحة كتابة الكود", "notConnected": "[غير متصل]", "offlineIndicator": "انت غير متصل بالانترنت على الارجح , بدون الاتصال بالانترنت لن تستطيع واجهة سطر الاوامر الخاصة بالاردوينو \"Arduino CLI\" تحميل الموارد المطلوبة و من الممكن ان تسبب باخطاء , الرجاء الاتصال بالانترنت و اعادة تشغيل البرنامج", "oldFormat": "ال '{0}' ما زالت تستخدم صيغة `.pde` القديمة . هل تريد الانتقال الى صيغة `.ino`  الجديدة ؟", @@ -147,13 +150,13 @@ "processing": "تتم المعالجة", "recommended": "يُنصح به", "retired": "متقاعد", - "selectManually": "Select Manually", + "selectManually": "اختر يدوياً", "selectedOn": "{0} شغّل", "serialMonitor": "مراقب المنفذ التسلسلي \"سيريال بورت\"\n ", "type": "النوع", "unknown": "غير معروف", "updateable": "يمكن تحديثه", - "userAbort": "User abort" + "userAbort": "إلغاء المستخدم" }, "compile": { "error": "خطا في الترجمة : {0}" @@ -212,7 +215,7 @@ "debug": { "debugWithMessage": "تصحيح برمجي - {0}", "debuggingNotSupported": "'{0}' لا يقبل التصحيح البرمجي", - "getDebugInfo": "Getting debug info...", + "getDebugInfo": "الحصول على معلومات التصحيح", "noPlatformInstalledFor": "المنصة غير مثبتة ل '{0}'", "optimizeForDebugging": "التحسين من اجل التصحيح البرمجي", "sketchIsNotCompiled": "المشروع '{0}' يجب ان يتم التحقق منه قبل بدء جلسة تصحيح الاخطاء . الرجاء التحقق من المشروع و اعادة تشغيل مصحح الاخطاء مرة اخرى .\nهل تريد التحقق من المشروع الان؟" @@ -368,7 +371,7 @@ "cloud.pull.warn": "True اذا كان يجب تحذير المستخدمين قبل سحب مشروع من السحابة . True افتراضيا", "cloud.push.warn": "True اذا كان يجب تحذير المستخدمين قبل دفع مشروع الى السحابة . True افتراضيا", "cloud.pushpublic.warn": "True اذا كان يجب تحذير المستخدمين قبل دفع مشروع عام الى السحابة . True افتراضيا", - "cloud.sharedSpaceId": "The ID of the Arduino Cloud shared space to load the sketchbook from. If empty, your private space is selected.", + "cloud.sharedSpaceId": "معرّف مساحة Arduino Cloud المشتركة لتحميل مجموعة المشاريع منها. إذا تُركت فارغة، يتم اختيار مساحتك الخاصة", "cloud.sketchSyncEndpoint": "الوجهة المستخدمة لدفع و سحب المشاريع من الخلفية . تشير افتراضيا الى Arduino Cloud API.", "compile": "الترجمة", "compile.experimental": "مُفعل اذا وَجَبَ على الIDE التعامل مع عدة اخطاء اثناء الترجمة . غير مفعل بشكل افتراضي ", @@ -386,7 +389,7 @@ "invalid.editorFontSize": "حجم خط المحرّر غير صالح . يجب ان يكون عدد موجب", "invalid.sketchbook.location": "موقع ملف المشروع غير صالح : {0}", "invalid.theme": "سمة غير صالحة", - "language.asyncWorkers": "Number of async workers used by the Arduino Language Server (clangd). Background index also uses this many workers. The minimum value is 0, and the maximum is 8. When it is 0, the language server uses all available cores. The default value is 0.", + "language.asyncWorkers": "عدد العاملين غير المتزامنين المستخدمين من قبل خادم لغة Arduino (clangd). يستخدم الفهرس الخلفي أيضاً نفس عدد العاملين. الحد الأدنى للقيمة هو 0، والحد الأقصى هو 8. عندما تكون القيمة 0، يستخدم خادم اللغة جميع النوى المتاحة. القيمة الافتراضية هي 0", "language.log": "\"True\" اذا كان مخدم اللغات الخاص بArduino يستطيع توليد سجلات الى ملف المشروع , و الا \"False\", و هي كذلك بشكل افتراضي.", "language.realTimeDiagnostics": "اذا تم تفعيله , سيقوم سيرفر اللغة باعطاء تشخيصات للاخطاء خلال الوقت الحقيقي اثناء الكتابة ضمن المحرر . غير مفعل بشكل افتراضي", "manualProxy": "اعدادات الوكيل يدوياً", @@ -412,7 +415,9 @@ "survey.notification": "مفعل اذا اراد المستخدم ان يتم تبليغه في حالوجود استطلاع راي . مفعل بشكل افتراضي", "unofficialBoardSupport": "انقر لعرض قائمة عناوين URL للوحات المدعومة بشكل غير رسمي", "upload": "الرفع", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True لخرج الرفع المطول . False افتراضيا", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "التحقق من الكود بعد الرفع", "window.autoScale": "True اذا كان مقياس الواجهة يتزامن تلقائيا مع حجم الخط ", "window.zoomLevel": { @@ -466,8 +471,8 @@ "saveSketchAs": "حفظ ملف المشروع باسم ...", "showFolder": "اعرض ملف المشروع", "sketch": "مشروع", - "sketchAlreadyContainsThisFileError": "The sketch already contains a file named '{0}'", - "sketchAlreadyContainsThisFileMessage": "Failed to save sketch \"{0}\" as \"{1}\". {2}", + "sketchAlreadyContainsThisFileError": "السكيتش يحتوي بالفعل على ملف باسم{0}", + "sketchAlreadyContainsThisFileMessage": "فشل في حفظ السكيتش {0} كـ {1} {2}", "sketchbook": "مجلد المشاريع", "titleLocalSketchbook": "مجلد المشاريع المحلي", "titleSketchbook": "مجلد المشاريع", diff --git a/i18n/az.json b/i18n/az.json index 1027d9092..a462a8dae 100644 --- a/i18n/az.json +++ b/i18n/az.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Proqramlayıcı", + "reloadBoardData": "Reload Board Data", "reselectLater": "Daha Sonra Yenidən Seç", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Select Board", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/be.json b/i18n/be.json index ff3779efb..8890f2c35 100644 --- a/i18n/be.json +++ b/i18n/be.json @@ -13,6 +13,7 @@ "board": { "board": "Плата{0}", "boardConfigDialogTitle": "Абярыце іншую плату і порт", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Інфармацыя пра плату", "boards": "платы", "configDialog1": "Абярыце як плату, так і порт, калі вы жадаеце загрузіць сцэнар.", @@ -31,10 +32,12 @@ "port": "Порт{0}", "ports": "порты", "programmer": "Сродак праграмавання", + "reloadBoardData": "Reload Board Data", "reselectLater": "Абярыце паўторна пазней", "revertBoardsConfig": "Ужыта '{0}' выяўлена ў '{1}'", "searchBoard": "Знайсці плату", "selectBoard": "Знайсці плату", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Калі ласка, абярыце порт, каб атрымаць інфармацыю пра плату.", "showAllAvailablePorts": "Паказвае ўсе даступныя порты, калі яны ўключаныя", "showAllPorts": "Паказаць усе порты", @@ -368,7 +371,7 @@ "cloud.pull.warn": "Калі true, карыстальнікі павінны быць папярэджаныя перад стварэннем сцэнара ў воблаку.\nПершапачаткова true.", "cloud.push.warn": "Калі true, карыстальнікі павінны быць папярэджаныя перад запускам сцэнара ў воблаку.\nПершапачаткова true.", "cloud.pushpublic.warn": "Калі true, карыстальнікі павінны быць папярэджаныя перад адпраўкай агульнадаступнага сцэнара ў воблака.\nПершапачаткова true.", - "cloud.sharedSpaceId": "The ID of the Arduino Cloud shared space to load the sketchbook from. If empty, your private space is selected.", + "cloud.sharedSpaceId": "Ідэнтыфікатар агульнай прасторы воблака Arduino, з якога можна загрузіць альбом сцэнараў.\nКалі пустое, абрана вашая асабістая прастора.", "cloud.sketchSyncEndpoint": "Канчатковая кропка, якая ўжываецца для адпраўкі і выцягвання сцэнара з сервернай часткі.\nПершапачаткова яна паказвае на API воблака Arduino.", "compile": "кампіляваць", "compile.experimental": "Калі true, асяроддзе IDE павінна апрацоўваць некалькі памылак кампілятара.\nПершапачаткова false", @@ -412,7 +415,9 @@ "survey.notification": "Калі true, карыстальнікі павінны атрымліваць апавяшчэнні аб даступнасці апытання.\nПершапачаткова true.", "unofficialBoardSupport": "Пстрыкніце, каб праглядзець спіс адрасоў URL падтрымкі неафіцыйных плат", "upload": "выгрузіць", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Калі true, каб быў падрабязны вывад пры загрузцы.\nПершапачаткова false.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Праверыць код пасля выгрузкі", "window.autoScale": "Калі true, карыстальніцкі інтэрфейс аўтаматычна маштабуецца ў адпаведнасці з памерам шрыфту.", "window.zoomLevel": { diff --git a/i18n/bg.json b/i18n/bg.json index e8102ac80..a36be5219 100644 --- a/i18n/bg.json +++ b/i18n/bg.json @@ -13,6 +13,7 @@ "board": { "board": "Платка{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Информация за платка", "boards": "boards", "configDialog1": "Изберете както платка, така и порт, ако искате да качите скица.", @@ -31,10 +32,12 @@ "port": "Порт{0}", "ports": "ports", "programmer": "Програматор", + "reloadBoardData": "Reload Board Data", "reselectLater": "Изберете отново по-късно", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Изберете платка", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Моля, изберете порт, за да получите информация за платката.", "showAllAvailablePorts": "Показва всички налични портове, когато е активиран", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Щракнете за списък с неофициално поддържаните URL адреси на платки", "upload": "качване", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True за подробен изход за качване. False по подразбиране.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Потвърдете кода след качване", "window.autoScale": "True , ако потребителският интерфейс автоматично се мащабира с размера на шрифта.", "window.zoomLevel": { diff --git a/i18n/ca_ES.json b/i18n/ca_ES.json index 8d59ff87c..c39300d87 100644 --- a/i18n/ca_ES.json +++ b/i18n/ca_ES.json @@ -13,6 +13,7 @@ "board": { "board": "Placa {0}", "boardConfigDialogTitle": "Selecciona una altra placa i port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Informació de la placa", "boards": "plaques", "configDialog1": "Selecciona una placa i un port si vols carregar un programa.", @@ -31,10 +32,12 @@ "port": "Port {0}", "ports": "ports", "programmer": "Programador", + "reloadBoardData": "Reload Board Data", "reselectLater": "Torna a triar més tard", "revertBoardsConfig": "Fes servir ' {0} ' descobert a ' {1} '", "searchBoard": "Busca una placa", "selectBoard": "Tria una placa", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Tria un port per obtenir informació de la placa.", "showAllAvailablePorts": "Mostra tots els ports disponibles habilitats", "showAllPorts": "Mostra tots els ports", @@ -412,7 +415,9 @@ "survey.notification": "Si està activat els usuaris seran notificats si hi ha una enquesta disponible. Per defecte està activat.", "unofficialBoardSupport": "Fes clic per obtenir una llista d'URLs de suport de plaques no oficials", "upload": "carrega", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Si està activat es mostrarà l'eixida detallada de la càrrega. Per defecte està desactivat.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verifica el codi després de pujar-lo", "window.autoScale": "Si està activat la interfície s'escalarà automàticament amb la mida de la lletra.", "window.zoomLevel": { diff --git a/i18n/cs.json b/i18n/cs.json index 5f66422af..4226e419e 100644 --- a/i18n/cs.json +++ b/i18n/cs.json @@ -5,43 +5,46 @@ "label": "O {0}" }, "account": { - "goToCloudEditor": "Go to Cloud Editor", + "goToCloudEditor": "Otevřít v cloudovém editoru", "goToIoTCloud": "Go to IoT Cloud", - "goToProfile": "Go to Profile", + "goToProfile": "Jdi do profilu", "menuTitle": "Arduino Cloud" }, "board": { "board": "Deska {0}", "boardConfigDialogTitle": "Zvolit jinou Desku a Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Info o desce", "boards": "Desky", "configDialog1": "Pokud chcete nahrát sketch, musíte zvolit jak desku tak i port.", "configDialog2": "Pokud zvolíte jen desku, budete schopni kompilovat sketch, ale nebudete ji moci nahrát do desky.", "couldNotFindPreviouslySelected": "Dříve zvolená deska '{0}' v instalované platformě '{1}' nebyla nalezena. Zvolte prosím manuálně desku kterou chcete použít. Chcete tuto desku zvolit nyní? ", - "editBoardsConfig": "Edit Board and Port...", + "editBoardsConfig": "Editovat Desku a Port", "getBoardInfo": "Získat info o desce.", "inSketchbook": "(v projektech)", "installNow": "\"{0}{1}\" jádro musí být instalováno pro aktuálně zvolenou \"{2}\" desku. Chcete ho nyní nainstalovat?", "noBoardsFound": "Nenalezeny žádné desky pro \"{0}\"", - "noNativeSerialPort": "Native serial port, can't obtain info.", + "noNativeSerialPort": "Fyzický sériový port, nemohu získat informace.", "noPortsDiscovered": "Nenalezeny žádné porty", - "nonSerialPort": "Non-serial port, can't obtain info.", + "nonSerialPort": "Nemohu získat informace, tohle není sériový port.", "openBoardsConfig": "Zvolte jinou desku a port...", "pleasePickBoard": "Vyberte prosím desku která je připojená k zvolenému portu. ", "port": "Port {0}", "ports": "porty", "programmer": "Programátor", + "reloadBoardData": "Reload Board Data", "reselectLater": "Zvolit později", - "revertBoardsConfig": "Use '{0}' discovered on '{1}'", + "revertBoardsConfig": "Použij '{0}' objeven na '{1}'", "searchBoard": "Vyhledat desku", "selectBoard": "Zvolit desku", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Prosím zvolte port pro získání informací o desce.", "showAllAvailablePorts": "Zobrazit všechny dostupné porty (pokud je zaškrtnuto)", "showAllPorts": "Ukázat všechny porty", "succesfullyInstalledPlatform": "Platforma {0}:{1} byla úspěšně nainstalována.", "succesfullyUninstalledPlatform": "Platforma {0}:{1} byla úspěšně odinstalována.", "typeOfPorts": "{0}porty", - "unconfirmedBoard": "Unconfirmed board", + "unconfirmedBoard": "Nepotvrzená deska", "unknownBoard": "Neznámá deska" }, "boardsManager": "Manažér desek", @@ -84,7 +87,7 @@ }, "cli-error-parser": { "keyboardError": "'Keyboard' nebylo nalezeno. Obsahuje váš projekt řádek '#include '?", - "mouseError": "'Mouse' not found. Does your sketch include the line '#include '?" + "mouseError": "'Myš' nebyla nalezena. Obsahuje váš projekt řádek '#include '?" }, "cloud": { "chooseSketchVisibility": "Zvolte viditelnost sketche:", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Zde klikněte pro seznam adres neoficiálně podporovaných desek", "upload": "nahrát", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Ano pro podrobný výstup při nahrávání. Ne je výchozí hodnota. ", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Kontrolovat kód po nahrání", "window.autoScale": "Ano pokud se měřítko uživatelského prostředí automaticky mění s velikostí písma. ", "window.zoomLevel": { diff --git a/i18n/da.json b/i18n/da.json index 22babc740..17cd55547 100644 --- a/i18n/da.json +++ b/i18n/da.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Reselect later", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Select Board", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/de.json b/i18n/de.json index 7c4125363..392096cb1 100644 --- a/i18n/de.json +++ b/i18n/de.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": " Anderes Board und anderen Ports wählen", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board-Informationen", "boards": "Boards", "configDialog1": " Wähle ein Board und einen Port, wenn du den Sketch hochladen möchtest.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "Ports", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Später auswählen", "revertBoardsConfig": "'{0}' an '{1}' verwenden", "searchBoard": "Board suchen", "selectBoard": "Board wählen", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": " Wähle einen Port, um Infos über das Board zu erhalten.", "showAllAvailablePorts": " Alle verfügbaren Ports anzeigen, wenn aktiviert.", "showAllPorts": "Alle Ports anzeigen", @@ -412,7 +415,9 @@ "survey.notification": "Wenn diese Option aktiviert ist, werden Nutzer über eine verfügbare Umfrage informiert. Standardmäßig aktiviert.", "unofficialBoardSupport": "Klicke hier, um eine URL-Liste von inoffiziell unterstützten Boards anzuzeigen.", "upload": "Hochladen", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Wenn die Option aktiviert ist, werden ausführliche Compiler-Meldungen angezeigt. Standardmäßig deaktiviert.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Code nach Hochladen überprüfen ", "window.autoScale": "Wenn die Option aktiviert ist, skaliert die Nutzeroberfläche automatisch mit der Schriftgröße.", "window.zoomLevel": { diff --git a/i18n/el.json b/i18n/el.json index 17bbb8e44..45a2e65a9 100644 --- a/i18n/el.json +++ b/i18n/el.json @@ -13,6 +13,7 @@ "board": { "board": "Πλακέτα{0}", "boardConfigDialogTitle": "Επιλέξτε Άλλη Πλακέτα & Θύρα", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Πληροφορίες Πλακέτας", "boards": "Πίνακες - Πλακέτες", "configDialog1": "Επίλεξε Πλακέτα και Θύρα αν θέλεις να ανεβάσεις ένα έργο.", @@ -31,10 +32,12 @@ "port": "Θύρα{0}", "ports": "Θύρες", "programmer": "Προγραμματιστής", + "reloadBoardData": "Reload Board Data", "reselectLater": "Επιλογή αργότερα", "revertBoardsConfig": "Χρησιμοποιήστε '{0}' που ανακαλύφθηκε στο '{1}'", "searchBoard": "Αναζήτηση πλακέτας", "selectBoard": "Επιλογή Πλακέτας", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Παρακαλώ επίλεξε μια θύρα για εμφάνιση πληροφοριών πλακέτας.", "showAllAvailablePorts": "Εμφανίζει όλες τις διαθέσιμες θύρες όταν είναι ενεργοποιημένο.", "showAllPorts": "Εμφάνιση όλων των θυρών", @@ -412,7 +415,9 @@ "survey.notification": "Σωστό εάν οι χρήστες πρέπει να ειδοποιούνται εάν υπάρχει διαθέσιμη έρευνα. Αληθές από προεπιλογή.", "unofficialBoardSupport": "Κλικ για λίστα Συνδέσμων ανεπίσημης υποστήριξης πλακετών", "upload": "ανέβασμα", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Αληθές για λεπτομερή έξοδο ανεβάσματος. Ψευδές απο προεπιλογή.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Επιβεβαίωση κώδικα μετά το ανέβασμα", "window.autoScale": "Αληθές αν η διεπαφή χρήστη κλιμακλωνεται αυτόματα μαζί με το μέγεθος γραμματοσειράς.", "window.zoomLevel": { diff --git a/i18n/es.json b/i18n/es.json index 60dfe189f..c606772d4 100644 --- a/i18n/es.json +++ b/i18n/es.json @@ -13,6 +13,7 @@ "board": { "board": "Placa{0}", "boardConfigDialogTitle": "Seleccionar Otra Placa y Puerto", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Información de la placa", "boards": "Placas", "configDialog1": "Selecciona tanto una placa como un puerto si quieres cargar un sketch.", @@ -31,10 +32,12 @@ "port": "Puerto {0}", "ports": "puertos", "programmer": "Programador", + "reloadBoardData": "Reload Board Data", "reselectLater": "Vuelve a seleccionar más tarde", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Buscar placa", "selectBoard": "Seleccionar Placa", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Por favor, seleccione un puerto para obtener información sobre la placa.", "showAllAvailablePorts": "Muestra todos los puertos disponibles cuando está activado", "showAllPorts": "Mostrar todos los puertos", @@ -78,9 +81,9 @@ "installAll": "Instalar todo", "noUpdates": "No se han encontrado actualizaciones recientes disponibles", "promptUpdateBoards": "Actualizaciones disponibles para alguna de tus placas", - "promptUpdateLibraries": "Actualizaciones disponibles para algunas de tus librerías", + "promptUpdateLibraries": "Actualizaciones disponibles para algunas de tus bibliotecas.", "updatingBoards": "Actualizando placas...", - "updatingLibraries": "Actualizando librerías..." + "updatingLibraries": "Actualizando bibliotecas..." }, "cli-error-parser": { "keyboardError": "'Keyboard' no encontrado. ¿Tiene tu proyecto incluida la linea '#include '?", @@ -361,7 +364,7 @@ "automatic": "Automático", "board.certificates": "Listado de certificados que pueden ser cargados en las placas", "browse": "Explorar", - "checkForUpdate": "Recibe notificaciones sobre actualizaciones disponibles del IDE, placas y librerías. Requiere reiniciar el IDE despues de hacer cambios. Por defecto está habilitado.", + "checkForUpdate": "Recibe notificaciones sobre actualizaciones disponibles del IDE, placas y bibliotecas. Requiere reiniciar el IDE despues de hacer cambios. Por defecto está habilitado.", "choose": "Elija", "cli.daemonDebug": "Habilitar logueo de depuración de las llamadas gRPC al Arduino CLI. Requiere un reinicio del IDE para tener efecto. Deshabilitado por defecto.", "cloud.enabled": "Verdadero si las funciones de sincronización del sketch están activadas. Verdadero por defecto.", @@ -412,7 +415,9 @@ "survey.notification": "Verdadero si usuarios deberían ser notificados cuando una encuesta esté disponible. Verdadero es predeterminado.", "unofficialBoardSupport": "Pulsa para listar las URLs de las tarjetas no oficiales", "upload": "Carga", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Verdadero para una salida verbosa de la carga. Falso por defecto.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verificar el código después de cargarlo", "window.autoScale": "Verdadero si la interfaz de usuario se escala automáticamente con el tamaño de la fuente.", "window.zoomLevel": { @@ -497,11 +502,11 @@ "user": "{0} (user)" }, "title": { - "cloud": "Cloud" + "cloud": "Nube" }, "updateIndexes": { - "updateIndexes": "Actualizar indices", - "updateLibraryIndex": "Actualizar Indice de librerías", + "updateIndexes": "Actualizar índices", + "updateLibraryIndex": "Actualizar índice de bibliotecas", "updatePackageIndex": "Actualizar índice de paquete" }, "upload": { diff --git a/i18n/eu.json b/i18n/eu.json index 3e9f0675f..a0e3163ea 100644 --- a/i18n/eu.json +++ b/i18n/eu.json @@ -13,6 +13,7 @@ "board": { "board": "{0} plaka", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Plakaren informazioa", "boards": "boards", "configDialog1": "Hautatu plaka bat eta ataka bat programa bat kargatu nahi baduzu.", @@ -31,10 +32,12 @@ "port": "{0} ataka", "ports": "ports", "programmer": "Programatzailea", + "reloadBoardData": "Reload Board Data", "reselectLater": "Hautatu berriz geroago", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Hautatu plaka", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Hautatu ataka bat plakaren informazioa eskuratzeko.", "showAllAvailablePorts": "Gaituta dagoenean erabilgarri dauden ataka guztiak erakusten ditu", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Egin klik ofizialak ez diren plaken laguntza-URL zerrenda ikusteko", "upload": "karga", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Egia kargaren irteera xehatua izateko. Lehenetsia Gezurra.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Egiaztatu kodea kargatu ondoren", "window.autoScale": "Egia erabiltzaile interfazea letra-tamainarekin automatikoki eskalatzen bada.", "window.zoomLevel": { diff --git a/i18n/fa.json b/i18n/fa.json index 3e3adf901..8fba4156e 100644 --- a/i18n/fa.json +++ b/i18n/fa.json @@ -13,6 +13,7 @@ "board": { "board": "بورد {0}", "boardConfigDialogTitle": "انتخاب یک بورد و پورت دیگر", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "مشخصات برد", "boards": "بردها", "configDialog1": "اگر می‌خواهید طرحی را آپلود کنید، هم یک تابلو و هم یک پورت انتخاب کنید.", @@ -31,10 +32,12 @@ "port": "پورت {0}", "ports": "پورت ها", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "بعدا انتخاب کنید", "revertBoardsConfig": "استفاده از «{0}» پیدا شده در «{1}»", "searchBoard": "جستجوی بورد", "selectBoard": "انتخاب برد", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "لطفاً یک پورت را برای به دست آوردن اطلاعات هیئت مدیره انتخاب کنید.", "showAllAvailablePorts": "نمایش تمام پورت های موجود در صورت فعال بودن", "showAllPorts": "نمایش تمام پورت ها", @@ -412,7 +415,9 @@ "survey.notification": "درست است اگر در صورت وجود نظرسنجی به کاربران اطلاع داده شود. به طور پیش فرض درست است.", "unofficialBoardSupport": "برای لیستی از آدرس های اینترنتی پشتیبانی هیئت مدیره غیررسمی کلیک کنید", "upload": "بارگذاری", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "برای خروجی آپلود پرمخاطب درست است. به طور پیش فرض نادرست است.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "تائید کد بعد از بارگذاری", "window.autoScale": "اگر رابط کاربری به طور خودکار با اندازه فونت تغییر کند درست است.", "window.zoomLevel": { diff --git a/i18n/fil.json b/i18n/fil.json index 8ebbcaac5..e8bcc9c4e 100644 --- a/i18n/fil.json +++ b/i18n/fil.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Reselect later", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Pumili ng board", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True para sa verbose upload output. Ito ay naka-false by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True kung nais mong awtomatikong mag-adjust ang scaling ng user interface depende sa laki ng font o letra sa screen.", "window.zoomLevel": { diff --git a/i18n/fr.json b/i18n/fr.json index 090c4f643..29b80f3f3 100644 --- a/i18n/fr.json +++ b/i18n/fr.json @@ -13,6 +13,7 @@ "board": { "board": "Carte{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Information de la carte", "boards": "boards", "configDialog1": "Sélectionnez une carte et un port si vous souhaitez téléverser un croquis.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Programmeur", + "reloadBoardData": "Reload Board Data", "reselectLater": "Re-sélectionner plus tard", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Selectionner une carte", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Merci de choisir un port pour obtenir des informations sur la carte.", "showAllAvailablePorts": "Affiche les ports disponibles quand activer.", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "Vrai si les utilisateurs doivent être avertis si une enquête est disponible. Vrai par défaut.", "unofficialBoardSupport": "Cliquer pour la liste non-officielle des URLs des support de cartes", "upload": "téléverser", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Vrai si le téléchargement en mode verbose. Faux par défaut.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Vérifier le code après le téléversement", "window.autoScale": "Vrai si l'interface utilisateur s'ajuste avec la taille de la police.", "window.zoomLevel": { diff --git a/i18n/he.json b/i18n/he.json index 3f3cbb3bb..66ed4846b 100644 --- a/i18n/he.json +++ b/i18n/he.json @@ -13,6 +13,7 @@ "board": { "board": "לוח{0}", "boardConfigDialogTitle": "יש לבחור לוח ופורט אחר", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "פרטי הלוח", "boards": "boards", "configDialog1": "נא לבחור סוג לוח ופורט כדי להעלות את הסקיצה.", @@ -31,10 +32,12 @@ "port": "פורט{0}", "ports": "ports", "programmer": "תכנת", + "reloadBoardData": "Reload Board Data", "reselectLater": "בחר מחדש מאוחר יותר", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "חפש לוח", "selectBoard": "בחר לוח", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "אנא בחר פורט לקבלת מידע אודותיו.", "showAllAvailablePorts": "הצג את כל הפורטים הזמינים כשמופעל", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/hu.json b/i18n/hu.json index 93e7180e3..0e4b75a22 100644 --- a/i18n/hu.json +++ b/i18n/hu.json @@ -13,6 +13,7 @@ "board": { "board": "Alaplap {0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Alaplapi információk", "boards": "boards", "configDialog1": "Válassz ki egy alaplapot és egy portot is - csak ekkor lehetséges a feltöltés. ", @@ -31,10 +32,12 @@ "port": "Port {0}", "ports": "ports", "programmer": "Programozó", + "reloadBoardData": "Reload Board Data", "reselectLater": "Később újra válaszd ki", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Alaplap választás", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Válassz egy portot az alaplap információinak megtekintéséhez. ", "showAllAvailablePorts": "Elérhető portok mutatása - ha engedélyezett", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Kattints ide a nem hivatalos alaplapok fordítási URL-jeinek listájához ", "upload": "feltöltés", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Kipipálva: a részletes feltöltési üzenetek kiírása a képernyőre. Alapértelmezés szerint hamis/nincs kipipálva.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Kód ellenőrzése feltöltés után", "window.autoScale": "Kipipálva, ha a felhasználói felület automatikusan méreteződik a betűmérettel együtt. ", "window.zoomLevel": { diff --git a/i18n/hy.json b/i18n/hy.json index 22babc740..17cd55547 100644 --- a/i18n/hy.json +++ b/i18n/hy.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Reselect later", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Select Board", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/id.json b/i18n/id.json index 7ff8cae03..8c60f75d2 100644 --- a/i18n/id.json +++ b/i18n/id.json @@ -13,6 +13,7 @@ "board": { "board": "Papan{0}", "boardConfigDialogTitle": "Pilih Papan dan Port Lain", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Informasi Papan", "boards": "papan", "configDialog1": "Pilih antara Papan dan Port jika kamu ingin mengunggah sebuah sketsa.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "port", "programmer": "Pemrogram", + "reloadBoardData": "Reload Board Data", "reselectLater": "Pilih ulang nanti", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Cari papan", "selectBoard": "Pilih Papan", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Mohon pilih port untuk memperoleh informasi papan.", "showAllAvailablePorts": "Tampilkan semua port yang tersedia saat dinyalakan", "showAllPorts": "Tampilkan semua port", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/it.json b/i18n/it.json index 35400398d..bdc3885df 100644 --- a/i18n/it.json +++ b/i18n/it.json @@ -13,6 +13,7 @@ "board": { "board": "Scheda{0}", "boardConfigDialogTitle": "Seleziona un'altra scheda e un'altra porta", + "boardDataReloaded": "Dati della scheda ricaricati.", "boardInfo": "Informazioni sulla scheda", "boards": "schede", "configDialog1": "Seleziona una scheda ed una porta se vuoi caricare uno sketch.", @@ -31,10 +32,12 @@ "port": "Porta{0}", "ports": "porte", "programmer": "Programmatore", + "reloadBoardData": "Ricarica i dati della scheda", "reselectLater": "Riselezionare più tardi", "revertBoardsConfig": "Usa '{0}' rilevato su '{1}'", "searchBoard": "Cerca la scheda", "selectBoard": "Seleziona la scheda", + "selectBoardToReload": "Seleziona una scheda.", "selectPortForInfo": "Selezionare la porta per ottenere info sulla scheda.", "showAllAvailablePorts": "Quando abilitato, mostra tutte le porte disponibili", "showAllPorts": "Mostra tutte le porte", @@ -412,7 +415,9 @@ "survey.notification": "Vero se gli utenti devono essere avvisati quando è disponibile un sondaggio. Vero per impostazione predefinita.", "unofficialBoardSupport": "Clicca per ottenere la lista di collegamenti per le schede di terze parti, non schede ufficiali.", "upload": "caricamento", + "upload.autoVerify": "Vero se l'IDE deve verificare automaticamente il codice prima del caricamento. Vero per impostazione predefinita. Quando questo valore è falso, l'IDE non ricompila il codice prima di caricare il binario sulla scheda. Si consiglia di impostare questo valore su false solo se si sa cosa si sta facendo.", "upload.verbose": "Vero per un rapporto dettagliato durante l'upload. Il valore predefinito è impostato su falso.", + "upload.verify": "Dopo il caricamento, verificare che il contenuto della memoria sulla scheda corrisponda al binario caricato.", "verifyAfterUpload": "Verifica il codice dopo il caricamento", "window.autoScale": "Vero se l'interfaccia scala automaticamente in base alla dimensione del font.", "window.zoomLevel": { diff --git a/i18n/ja.json b/i18n/ja.json index 4e36e6b46..aca3aeaf0 100644 --- a/i18n/ja.json +++ b/i18n/ja.json @@ -13,6 +13,7 @@ "board": { "board": "ボード{0}", "boardConfigDialogTitle": "他のボードとポートを選択", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "ボード情報", "boards": "ボード", "configDialog1": "スケッチを書き込みたい場合には、ボードとポートの両方を選択してください。", @@ -31,10 +32,12 @@ "port": "ポート{0}", "ports": "ポート", "programmer": "書き込み装置", + "reloadBoardData": "Reload Board Data", "reselectLater": "後で選択しなおす", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "ボードを検索", "selectBoard": "ボードを選択", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "ボード情報を得るには、ポートを選択してください。", "showAllAvailablePorts": "有効な場合、利用可能なすべてのポートを表示", "showAllPorts": "全てのポートを表示", @@ -412,7 +415,9 @@ "survey.notification": "アンケートが利用可能になったとき、通知を受け取る場合はTrueを指定します。デフォルトではTrue。", "unofficialBoardSupport": "クリックして非公式ボードをサポートするURLのリストを表示", "upload": "書き込み", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "書き込み時に詳細な出力を行うにはtrueを指定。デフォルトではfalse。", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "書き込み後にコードを検証する", "window.autoScale": "ユーザーインターフェイスをフォントサイズに合わせて自動的に拡大縮小させるにはtrueを指定。", "window.zoomLevel": { diff --git a/i18n/ko.json b/i18n/ko.json index ddeae53a9..e00e56133 100644 --- a/i18n/ko.json +++ b/i18n/ko.json @@ -13,7 +13,8 @@ "board": { "board": "보드{0}", "boardConfigDialogTitle": "보드 및 포트 선택", - "boardInfo": "보드정보", + "boardDataReloaded": "Board data reloaded.", + "boardInfo": "보드 정보", "boards": "boards", "configDialog1": "스케치를 업로드할 보드 및 포트를 선택", "configDialog2": "보드를 선택하면 컴파일은 가능하지만, 스케치를 업로드 할 수 없습니다.", @@ -31,10 +32,12 @@ "port": "포트{0}", "ports": "ports", "programmer": "프로그래머", + "reloadBoardData": "Reload Board Data", "reselectLater": "나중에 선택", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "보드 검색", "selectBoard": "보드 선택", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "보드 정보를 얻으려면 포트를 선택하십시오.", "showAllAvailablePorts": "활성화된 사용 가능한 모든 포트를 표시합니다.", "showAllPorts": "모든 포트 보이기", @@ -412,7 +415,9 @@ "survey.notification": "설문조사를 사용할 수 있는 경우 사용자에게 알림을 보내야 하는 경우 True입니다. 기본은 True입니다.", "unofficialBoardSupport": "비공식 보드 지원 URL 목록을 보려면 클릭하십시오.", "upload": "업로드", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "자세한 업로드 출력의 경우 True이고 기본적으로 False입니다.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "업로드 후 코드확인", "window.autoScale": "사용자 인터페이스가 글꼴 크기에 따라 자동으로 조정되는 경우 True입니다.", "window.zoomLevel": { diff --git a/i18n/my_MM.json b/i18n/my_MM.json index 626fdad02..88037a95a 100644 --- a/i18n/my_MM.json +++ b/i18n/my_MM.json @@ -13,6 +13,7 @@ "board": { "board": "ဘုတ်{0}", "boardConfigDialogTitle": "အခြားဘုတ်နှင့်အပေါက်ကို ရွေးချယ်ပါ", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "ဘုတ်ဆိုင်ရာအချက်အလက်", "boards": "ဘုတ်များ", "configDialog1": "ကုတ်ဖိုင်တစ်ခုကို upload တင်လိုပါက ဘုတ်နှင့်အပေါက် နှစ်ခုလုံးကို ရွေးပေးပါ။", @@ -31,10 +32,12 @@ "port": "အပေါက်{0}", "ports": "အပေါက်များ", "programmer": "ပရိုဂရမ်မာ", + "reloadBoardData": "Reload Board Data", "reselectLater": "နောက်မှ ပြန်ရွေးချယ်မည်", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "ဘုတ်ရှာမည်", "selectBoard": "ဘုတ်ရွေးချယ်မည်", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "လျှပ်စစ်ဘုတ်ဆိုင်ရာအချက်အလက်ရရှိရန် အပေါက်ကို ရွေးချယ်ပါ။", "showAllAvailablePorts": "အမှန်ခြစ်ထားပါက ရွေးချယ်နိုင်သော အပေါက်များအားလုံးကို ဖော်ပြပေးမည်", "showAllPorts": "အပေါက်အားလုံးပြ", @@ -412,7 +415,9 @@ "survey.notification": "စစ်တမ်းကောက်ပါက အသုံးပြုသူကို အသိပေးမည်။ မူရင်းတန်ဖိုး - အမှန်", "unofficialBoardSupport": "တရားမဝင်ဘုတ် ထောက်ပံ့မှုURLစာရင်းအတွက် ကလစ်လိုက်ပါ", "upload": "အပ်လုတ်တင်", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "အပ်လုတ်တင်မှုဆိုင်အချက်အလက်များ အသေးစိတ်ဖော်ပြမည်။ မူရင်းတန်ဖိုး - အမှား", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "အပ်လုတ်တင်ပြီးလျှင်ကုတ်ကိုစစ်ဆေးပါ", "window.autoScale": "အမှန်ဖြစ်နေပါက အသုံးပြုသူအင်တာဖေ့သည် ဖောင့်အရွယ်အစားနှင့်အတူ အလိုလိုချိန်ညှိမည်။", "window.zoomLevel": { diff --git a/i18n/ne.json b/i18n/ne.json index f5617ebb7..264a12494 100644 --- a/i18n/ne.json +++ b/i18n/ne.json @@ -13,6 +13,7 @@ "board": { "board": "बोर्ड {0}", "boardConfigDialogTitle": "अन्य बोर्ड र पोर्ट चयन गर्नुहोस् |", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "बोर्डको जानकारी", "boards": "बोर्डहरू", "configDialog1": "यदि तपाइँ स्केच अपलोड गर्न चाहनुहुन्छ भने बोर्ड र पोर्ट दुवै चयन गर्नुहोस्।", @@ -31,10 +32,12 @@ "port": "पोर्ट {0}", "ports": "पोर्टहरू", "programmer": "प्रोग्रामर", + "reloadBoardData": "Reload Board Data", "reselectLater": "पुन: चयन गर्नुहोस्", "revertBoardsConfig": "'{1}' मा फेला परेको '{0}' प्रयोग गर्नुहोस्", "searchBoard": "बोर्ड खोज्नुहोस। ", "selectBoard": "बोर्ड छान्नुहोस । ", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "बोर्ड जानकारी प्राप्त गर्न पोर्ट चयन गर्नुहोस्।", "showAllAvailablePorts": "अनुमति हुँदा सबै उपलब्ध पोर्टहरू देखाउँछ।", "showAllPorts": "पोर्टहरु हेर्नुहोस |", @@ -412,7 +415,9 @@ "survey.notification": "यदि सर्वेक्षण उपलब्ध छ भने प्रयोगकर्ताहरूलाई सूचित गरिनुपर्छ भने सही संकेत गर्नुहोस्। यो पूर्वनिर्धारित रूपमा सही छ।", "unofficialBoardSupport": "अनौपचारिक बोर्ड समर्थन गर्ने URL को सूचीको लागि क्लिक गर्नुहोस्", "upload": "अपलोड ", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "वर्बोज अपलोड आउटपुट को लागी सही संकेत गर्नुहोस्। यो पूर्वनिर्धारित रूपमा असक्षम छ। ", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "कोड अपलोड गरेपछि प्रमाणित गर्नुहोस्", "window.autoScale": "प्रयोगकर्ता इन्टरफेसले स्वचालित रूपमा फन्ट साइजसँग मापन गरेमा सही संकेत गर्नुहोस्।", "window.zoomLevel": { diff --git a/i18n/nl.json b/i18n/nl.json index 9b3aba52f..ddfa0dd30 100644 --- a/i18n/nl.json +++ b/i18n/nl.json @@ -13,6 +13,7 @@ "board": { "board": "Bord{0}", "boardConfigDialogTitle": "Selecteer Ander Bord en Poort", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Bord Informatie", "boards": "borden", "configDialog1": "Selecteer een Bord en een Poort als je een schets wilt opladen.", @@ -31,10 +32,12 @@ "port": "Poort{0}", "ports": "poorten", "programmer": "Programmeerapparaat", + "reloadBoardData": "Reload Board Data", "reselectLater": "Later opnieuw selecteren", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Bord zoeken", "selectBoard": "Bord selecteren", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Selecteer een poort om bord informatie te bekomen.", "showAllAvailablePorts": "Toont alle beschikbare poorten indien ingeschakeld", "showAllPorts": "Toon alle poorten", @@ -412,7 +415,9 @@ "survey.notification": "Waar als gebruikers een melding moeten krijgen als er een enquête beschikbaar is. Standaard is dit waar.", "unofficialBoardSupport": "Klik voor een lijst met onofficiële borden ondersteuning URL's", "upload": "uploaden", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Waar voor uitgebreide uploaduitvoer. Standaard onwaar.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verifieer de code na het uploaden", "window.autoScale": "Waar als de gebruikersinterface automatisch wordt geschaald met de lettergrootte.", "window.zoomLevel": { diff --git a/i18n/no.json b/i18n/no.json index fa6f0f253..4fe18ad78 100644 --- a/i18n/no.json +++ b/i18n/no.json @@ -13,6 +13,7 @@ "board": { "board": "Kort{0}", "boardConfigDialogTitle": "Velg et annet kort og port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Informasjon om kort", "boards": "Kort", "configDialog1": "Velg kort og portnummer for å laste opp skissen", @@ -31,10 +32,12 @@ "port": "Port {0}", "ports": "porter", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Velg igjen senere", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Søk etter kort", "selectBoard": "Velg kort", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Velg en port for å få info om kort", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Vis alle porter", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/pl.json b/i18n/pl.json index 1b19d20e5..201faf2b0 100644 --- a/i18n/pl.json +++ b/i18n/pl.json @@ -13,6 +13,7 @@ "board": { "board": "Płytka{0}", "boardConfigDialogTitle": "Wybierz inną płytkę i port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Informacje o płytce", "boards": "Płytki", "configDialog1": "Wybierz płytkę oraz port, aby wgrać szkic.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "Porty", "programmer": "Programator", + "reloadBoardData": "Reload Board Data", "reselectLater": "Wybierz ponownie później", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Szukaj płytki", "selectBoard": "Wybierz płytkę", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Wybierz port, aby uzyskać informacje o płytce.", "showAllAvailablePorts": "Po włączeniu pokazuje wszystkie dostępne porty", "showAllPorts": "Pokaż wszystkie dostępne porty", @@ -412,7 +415,9 @@ "survey.notification": "Prawdziwy, jeśli użytkownicy powinni być powiadamiani o dostępności ankiety. Domyślnie prawdwdziwy.", "unofficialBoardSupport": "Kliknij, aby przejść do listy linków nieoficjalnego wsparcia dla płytek.", "upload": "przesyłanie", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Prawda, aby pokazywać szczegółowe informacje podczas wgrywania. Fałsz jest wartością domyślną.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Weryfikuj kod po przesłaniu", "window.autoScale": "Prawda, jeśli interfejs użytkownika skaluje się automatycznie z rozmiarem czcionki.", "window.zoomLevel": { diff --git a/i18n/pt.json b/i18n/pt.json index fdc604356..4c33e7dae 100644 --- a/i18n/pt.json +++ b/i18n/pt.json @@ -13,6 +13,7 @@ "board": { "board": "Placa{0}", "boardConfigDialogTitle": "Selecionar Outra Placa e Porta", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Informações da Placa", "boards": "placas", "configDialog1": "Selecione uma placa e uma porta se quiser fazer o upload de um sketch.", @@ -31,10 +32,12 @@ "port": "Porta{0}", "ports": "portas", "programmer": "Programador/Gravador", + "reloadBoardData": "Reload Board Data", "reselectLater": "Selecionar novamente mais tarde", "revertBoardsConfig": "Uso '{0}' descoberto em '{1}'", "searchBoard": "Procurar placa", "selectBoard": "Selecionar Placa", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Selecione uma porta para obter informações sobre a placa.", "showAllAvailablePorts": "Mostrar todas as portas disponíveis quando habilitado", "showAllPorts": "Mostrar todas as portas", @@ -412,7 +415,9 @@ "survey.notification": "Verdadeiro se o usuário deve ser notificado se uma pesquisa estiver disponível. Verdadeiro por padrão", "unofficialBoardSupport": "Clique para obter uma lista de URLs de placas não oficiais suportadas", "upload": "enviar", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "Verdadeiro para saída de upload detalhada. Falsa é padrão.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verificar o código após enviar", "window.autoScale": "Verdadeiro se a interface do usuário for dimensionada automaticamente com o tamanho da fonte.", "window.zoomLevel": { diff --git a/i18n/ro.json b/i18n/ro.json index a5a37a99a..38e52b4d0 100644 --- a/i18n/ro.json +++ b/i18n/ro.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "boards", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Portul{0}", "ports": "ports", "programmer": "Programator", + "reloadBoardData": "Reload Board Data", "reselectLater": "Re-selectează mai târziu", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Selectează Placa", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "încarcă", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verifică codul după încarcare", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/ru.json b/i18n/ru.json index 046070f98..1ee05dfad 100644 --- a/i18n/ru.json +++ b/i18n/ru.json @@ -13,6 +13,7 @@ "board": { "board": "Плата{0}", "boardConfigDialogTitle": "Выберите другую плату и порт", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Информация о плате", "boards": "платы", "configDialog1": "Выберите плату и порт, если Вы хотите загрузить скетч в плату.", @@ -31,10 +32,12 @@ "port": "Порт{0}", "ports": "порты", "programmer": "Программатор", + "reloadBoardData": "Reload Board Data", "reselectLater": "Перевыбрать позже", "revertBoardsConfig": "Используйте '{0}', обнаруженный на '{1}'", "searchBoard": "Поиск платы", "selectBoard": "Выбор платы", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Пожалуйста, выберите порт в меню инструментов для получения информации с платы.", "showAllAvailablePorts": "Показать все доступные порты при включении", "showAllPorts": "Показать все порты", @@ -412,7 +415,9 @@ "survey.notification": "Включите, если пользователи должны получать уведомления, когда появится новый опрос. Включено по умолчанию.", "unofficialBoardSupport": "Список URL-адресов поддержки неофициальных плат", "upload": "выгрузке на плату", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True - подробный вывод при загрузке скетча на плату. По умолчанию - false.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Проверять содержимое памяти платы после загрузки", "window.autoScale": "True, если пользовательский интерфейс автоматически масштабируется в зависимости от размера шрифта.", "window.zoomLevel": { diff --git a/i18n/si.json b/i18n/si.json index 1c6490617..6015c08fa 100644 --- a/i18n/si.json +++ b/i18n/si.json @@ -13,6 +13,7 @@ "board": { "board": "Board{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Board Info", "boards": "පුවරු", "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "ports", "programmer": "ක්‍රමලේඛක", + "reloadBoardData": "Reload Board Data", "reselectLater": "පසුව තෝරන්න", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "පුවරුව සොයන්න", "selectBoard": "පුවරුව තෝරන්න", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Please select a port to obtain board info.", "showAllAvailablePorts": "Shows all available ports when enabled", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/sk.json b/i18n/sk.json new file mode 100644 index 000000000..17cd55547 --- /dev/null +++ b/i18n/sk.json @@ -0,0 +1,557 @@ +{ + "arduino": { + "about": { + "detail": "Version: {0}\nDate: {1}{2}\nCLI Version: {3}\n\n{4}", + "label": "About {0}" + }, + "account": { + "goToCloudEditor": "Go to Cloud Editor", + "goToIoTCloud": "Go to IoT Cloud", + "goToProfile": "Go to Profile", + "menuTitle": "Arduino Cloud" + }, + "board": { + "board": "Board{0}", + "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", + "boardInfo": "Board Info", + "boards": "boards", + "configDialog1": "Select both a Board and a Port if you want to upload a sketch.", + "configDialog2": "If you only select a Board you will be able to compile, but not to upload your sketch.", + "couldNotFindPreviouslySelected": "Could not find previously selected board '{0}' in installed platform '{1}'. Please manually reselect the board you want to use. Do you want to reselect it now?", + "editBoardsConfig": "Edit Board and Port...", + "getBoardInfo": "Get Board Info", + "inSketchbook": " (in Sketchbook)", + "installNow": "The \"{0} {1}\" core has to be installed for the currently selected \"{2}\" board. Do you want to install it now?", + "noBoardsFound": "No boards found for \"{0}\"", + "noNativeSerialPort": "Native serial port, can't obtain info.", + "noPortsDiscovered": "No ports discovered", + "nonSerialPort": "Non-serial port, can't obtain info.", + "openBoardsConfig": "Select other board and port…", + "pleasePickBoard": "Please pick a board connected to the port you have selected.", + "port": "Port{0}", + "ports": "ports", + "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", + "reselectLater": "Reselect later", + "revertBoardsConfig": "Use '{0}' discovered on '{1}'", + "searchBoard": "Search board", + "selectBoard": "Select Board", + "selectBoardToReload": "Please select a board first.", + "selectPortForInfo": "Please select a port to obtain board info.", + "showAllAvailablePorts": "Shows all available ports when enabled", + "showAllPorts": "Show all ports", + "succesfullyInstalledPlatform": "Successfully installed platform {0}:{1}", + "succesfullyUninstalledPlatform": "Successfully uninstalled platform {0}:{1}", + "typeOfPorts": "{0} ports", + "unconfirmedBoard": "Unconfirmed board", + "unknownBoard": "Unknown board" + }, + "boardsManager": "Boards Manager", + "boardsType": { + "arduinoCertified": "Arduino Certified" + }, + "bootloader": { + "burnBootloader": "Burn Bootloader", + "burningBootloader": "Burning bootloader...", + "doneBurningBootloader": "Done burning bootloader." + }, + "burnBootloader": { + "error": "Error while burning the bootloader: {0}" + }, + "certificate": { + "addNew": "Add New", + "addURL": "Add URL to fetch SSL certificate", + "boardAtPort": "{0} at {1}", + "certificatesUploaded": "Certificates uploaded.", + "enterURL": "Enter URL", + "noSupportedBoardConnected": "No supported board connected", + "openContext": "Open context", + "remove": "Remove", + "selectBoard": "Select a board...", + "selectCertificateToUpload": "1. Select certificate to upload", + "selectDestinationBoardToUpload": "2. Select destination board and upload certificate", + "upload": "Upload", + "uploadFailed": "Upload failed. Please try again.", + "uploadRootCertificates": "Upload SSL Root Certificates", + "uploadingCertificates": "Uploading certificates." + }, + "checkForUpdates": { + "checkForUpdates": "Check for Arduino Updates", + "installAll": "Install All", + "noUpdates": "There are no recent updates available.", + "promptUpdateBoards": "Updates are available for some of your boards.", + "promptUpdateLibraries": "Updates are available for some of your libraries.", + "updatingBoards": "Updating boards...", + "updatingLibraries": "Updating libraries..." + }, + "cli-error-parser": { + "keyboardError": "'Keyboard' not found. Does your sketch include the line '#include '?", + "mouseError": "'Mouse' not found. Does your sketch include the line '#include '?" + }, + "cloud": { + "chooseSketchVisibility": "Choose visibility of your Sketch:", + "cloudSketchbook": "Cloud Sketchbook", + "connected": "Connected", + "continue": "Continue", + "donePulling": "Done pulling '{0}'.", + "donePushing": "Done pushing '{0}'.", + "embed": "Embed:", + "emptySketchbook": "Your Sketchbook is empty", + "goToCloud": "Go to Cloud", + "learnMore": "Learn more", + "link": "Link:", + "notYetPulled": "Cannot push to Cloud. It is not yet pulled.", + "offline": "Offline", + "openInCloudEditor": "Open in Cloud Editor", + "options": "Options...", + "privateVisibility": "Private. Only you can view the Sketch.", + "profilePicture": "Profile picture", + "publicVisibility": "Public. Anyone with the link can view the Sketch.", + "pull": "Pull", + "pullFirst": "You have to pull first to be able to push to the Cloud.", + "pullSketch": "Pull Sketch", + "pullSketchMsg": "Pulling this Sketch from the Cloud will overwrite its local version. Are you sure you want to continue?", + "push": "Push", + "pushSketch": "Push Sketch", + "pushSketchMsg": "This is a Public Sketch. Before pushing, make sure any sensitive information is defined in arduino_secrets.h files. You can make a Sketch private from the Share panel.", + "remote": "Remote", + "share": "Share...", + "shareSketch": "Share Sketch", + "showHideSketchbook": "Show/Hide Cloud Sketchbook", + "signIn": "SIGN IN", + "signInToCloud": "Sign in to Arduino Cloud", + "signOut": "Sign Out", + "sync": "Sync", + "syncEditSketches": "Sync and edit your Arduino Cloud Sketches", + "visitArduinoCloud": "Visit Arduino Cloud to create Cloud Sketches." + }, + "cloudSketch": { + "alreadyExists": "Cloud sketch '{0}' already exists.", + "creating": "Creating cloud sketch '{0}'...", + "new": "New Cloud Sketch", + "notFound": "Could not pull the cloud sketch '{0}'. It does not exist.", + "pulling": "Synchronizing sketchbook, pulling '{0}'...", + "pushing": "Synchronizing sketchbook, pushing '{0}'...", + "renaming": "Renaming cloud sketch from '{0}' to '{1}'...", + "synchronizingSketchbook": "Synchronizing sketchbook..." + }, + "common": { + "all": "All", + "contributed": "Contributed", + "installManually": "Install Manually", + "later": "Later", + "noBoardSelected": "No board selected", + "noSketchOpened": "No sketch opened", + "notConnected": "[not connected]", + "offlineIndicator": "You appear to be offline. Without an Internet connection, the Arduino CLI might not be able to download the required resources and could cause malfunction. Please connect to the Internet and restart the application.", + "oldFormat": "The '{0}' still uses the old `.pde` format. Do you want to switch to the new `.ino` extension?", + "partner": "Partner", + "processing": "Processing", + "recommended": "Recommended", + "retired": "Retired", + "selectManually": "Select Manually", + "selectedOn": "on {0}", + "serialMonitor": "Serial Monitor", + "type": "Type", + "unknown": "Unknown", + "updateable": "Updatable", + "userAbort": "User abort" + }, + "compile": { + "error": "Compilation error: {0}" + }, + "component": { + "boardsIncluded": "Boards included in this package:", + "by": "by", + "clickToOpen": "Click to open in browser: {0}", + "filterSearch": "Filter your search...", + "install": "Install", + "installLatest": "Install Latest", + "installVersion": "Install {0}", + "installed": "{0} installed", + "moreInfo": "More info", + "otherVersions": "Other Versions", + "remove": "Remove", + "title": "{0} by {1}", + "uninstall": "Uninstall", + "uninstallMsg": "Do you want to uninstall {0}?", + "update": "Update" + }, + "configuration": { + "cli": { + "inaccessibleDirectory": "Could not access the sketchbook location at '{0}': {1}" + } + }, + "connectionStatus": { + "connectionLost": "Connection lost. Cloud sketch actions and updates won't be available." + }, + "contributions": { + "addFile": "Add File", + "fileAdded": "One file added to the sketch.", + "plotter": { + "couldNotOpen": "Couldn't open serial plotter" + }, + "replaceTitle": "Replace" + }, + "core": { + "compilerWarnings": { + "all": "All", + "default": "Default", + "more": "More", + "none": "None" + } + }, + "coreContribution": { + "copyError": "Copy error messages", + "noBoardSelected": "No board selected. Please select your Arduino board from the Tools > Board menu." + }, + "createCloudCopy": "Push Sketch to Cloud", + "daemon": { + "restart": "Restart Daemon", + "start": "Start Daemon", + "stop": "Stop Daemon" + }, + "debug": { + "debugWithMessage": "Debug - {0}", + "debuggingNotSupported": "Debugging is not supported by '{0}'", + "getDebugInfo": "Getting debug info...", + "noPlatformInstalledFor": "Platform is not installed for '{0}'", + "optimizeForDebugging": "Optimize for Debugging", + "sketchIsNotCompiled": "Sketch '{0}' must be verified before starting a debug session. Please verify the sketch and start debugging again. Do you want to verify the sketch now?" + }, + "developer": { + "clearBoardList": "Clear the Board List History", + "clearBoardsConfig": "Clear the Board and Port Selection", + "dumpBoardList": "Dump the Board List" + }, + "dialog": { + "dontAskAgain": "Don't ask again" + }, + "editor": { + "autoFormat": "Auto Format", + "commentUncomment": "Comment/Uncomment", + "copyForForum": "Copy for Forum (Markdown)", + "decreaseFontSize": "Decrease Font Size", + "decreaseIndent": "Decrease Indent", + "increaseFontSize": "Increase Font Size", + "increaseIndent": "Increase Indent", + "nextError": "Next Error", + "previousError": "Previous Error", + "revealError": "Reveal Error" + }, + "examples": { + "builtInExamples": "Built-in examples", + "couldNotInitializeExamples": "Could not initialize built-in examples.", + "customLibrary": "Examples from Custom Libraries", + "for": "Examples for {0}", + "forAny": "Examples for any board", + "menu": "Examples" + }, + "firmware": { + "checkUpdates": "Check Updates", + "failedInstall": "Installation failed. Please try again.", + "install": "Install", + "installingFirmware": "Installing firmware.", + "overwriteSketch": "Installation will overwrite the Sketch on the board.", + "selectBoard": "Select Board", + "selectVersion": "Select firmware version", + "successfullyInstalled": "Firmware successfully installed.", + "updater": "Firmware Updater" + }, + "help": { + "environment": "Environment", + "faq": "Frequently Asked Questions", + "findInReference": "Find in Reference", + "gettingStarted": "Getting Started", + "keyword": "Type a keyword", + "privacyPolicy": "Privacy Policy", + "reference": "Reference", + "search": "Search on Arduino.cc", + "troubleshooting": "Troubleshooting", + "visit": "Visit Arduino.cc" + }, + "ide-updater": { + "checkForUpdates": "Check for Arduino IDE Updates", + "closeAndInstallButton": "Close and Install", + "closeToInstallNotice": "Close the software and install the update on your machine.", + "downloadButton": "Download", + "downloadingNotice": "Downloading the latest version of the Arduino IDE.", + "errorCheckingForUpdates": "Error while checking for Arduino IDE updates.\n{0}", + "goToDownloadButton": "Go To Download", + "goToDownloadPage": "An update for the Arduino IDE is available, but we're not able to download and install it automatically. Please go to the download page and download the latest version from there.", + "ideUpdaterDialog": "Software Update", + "newVersionAvailable": "A new version of Arduino IDE ({0}) is available for download.", + "noUpdatesAvailable": "There are no recent updates available for the Arduino IDE", + "notNowButton": "Not now", + "skipVersionButton": "Skip Version", + "updateAvailable": "Update Available", + "versionDownloaded": "Arduino IDE {0} has been downloaded." + }, + "installable": { + "libraryInstallFailed": "Failed to install library: '{0}{1}'.", + "platformInstallFailed": "Failed to install platform: '{0}{1}'." + }, + "library": { + "addZip": "Add .ZIP Library...", + "arduinoLibraries": "Arduino libraries", + "contributedLibraries": "Contributed libraries", + "include": "Include Library", + "installAll": "Install All", + "installLibraryDependencies": "Install library dependencies", + "installMissingDependencies": "Would you like to install all the missing dependencies?", + "installOneMissingDependency": "Would you like to install the missing dependency?", + "installWithoutDependencies": "Install without dependencies", + "installedSuccessfully": "Successfully installed library {0}:{1}", + "libraryAlreadyExists": "A library already exists. Do you want to overwrite it?", + "manageLibraries": "Manage Libraries...", + "namedLibraryAlreadyExists": "A library folder named {0} already exists. Do you want to overwrite it?", + "needsMultipleDependencies": "The library {0}:{1} needs some other dependencies currently not installed:", + "needsOneDependency": "The library {0}:{1} needs another dependency currently not installed:", + "overwriteExistingLibrary": "Do you want to overwrite the existing library?", + "successfullyInstalledZipLibrary": "Successfully installed library from {0} archive", + "title": "Library Manager", + "uninstalledSuccessfully": "Successfully uninstalled library {0}:{1}", + "zipLibrary": "Library" + }, + "librarySearchProperty": { + "topic": "Topic" + }, + "libraryTopic": { + "communication": "Communication", + "dataProcessing": "Data Processing", + "dataStorage": "Data Storage", + "deviceControl": "Device Control", + "display": "Display", + "other": "Other", + "sensors": "Sensors", + "signalInputOutput": "Signal Input/Output", + "timing": "Timing", + "uncategorized": "Uncategorized" + }, + "libraryType": { + "installed": "Installed" + }, + "menu": { + "advanced": "Advanced", + "sketch": "Sketch", + "tools": "Tools" + }, + "monitor": { + "alreadyConnectedError": "Could not connect to {0} {1} port. Already connected.", + "baudRate": "{0} baud", + "connectionFailedError": "Could not connect to {0} {1} port.", + "connectionFailedErrorWithDetails": "{0} Could not connect to {1} {2} port.", + "connectionTimeout": "Timeout. The IDE has not received the 'success' message from the monitor after successfully connecting to it", + "missingConfigurationError": "Could not connect to {0} {1} port. The monitor configuration is missing.", + "notConnectedError": "Not connected to {0} {1} port.", + "unableToCloseWebSocket": "Unable to close websocket", + "unableToConnectToWebSocket": "Unable to connect to websocket" + }, + "newCloudSketch": { + "newSketchTitle": "Name of the new Cloud Sketch" + }, + "portProtocol": { + "network": "Network", + "serial": "Serial" + }, + "preferences": { + "additionalManagerURLs": "Additional Boards Manager URLs", + "auth.audience": "The OAuth2 audience.", + "auth.clientID": "The OAuth2 client ID.", + "auth.domain": "The OAuth2 domain.", + "auth.registerUri": "The URI used to register a new user.", + "automatic": "Automatic", + "board.certificates": "List of certificates that can be uploaded to boards", + "browse": "Browse", + "checkForUpdate": "Receive notifications of available updates for the IDE, boards, and libraries. Requires an IDE restart after change. It's true by default.", + "choose": "Choose", + "cli.daemonDebug": "Enable debug logging of the gRPC calls to the Arduino CLI. A restart of the IDE is needed for this setting to take effect. It's false by default.", + "cloud.enabled": "True if the sketch sync functions are enabled. Defaults to true.", + "cloud.pull.warn": "True if users should be warned before pulling a cloud sketch. Defaults to true.", + "cloud.push.warn": "True if users should be warned before pushing a cloud sketch. Defaults to true.", + "cloud.pushpublic.warn": "True if users should be warned before pushing a public sketch to the cloud. Defaults to true.", + "cloud.sharedSpaceId": "The ID of the Arduino Cloud shared space to load the sketchbook from. If empty, your private space is selected.", + "cloud.sketchSyncEndpoint": "The endpoint used to push and pull sketches from a backend. By default it points to Arduino Cloud API.", + "compile": "compile", + "compile.experimental": "True if the IDE should handle multiple compiler errors. False by default", + "compile.revealRange": "Adjusts how compiler errors are revealed in the editor after a failed verify/upload. Possible values: 'auto': Scroll vertically as necessary and reveal a line. 'center': Scroll vertically as necessary and reveal a line centered vertically. 'top': Scroll vertically as necessary and reveal a line close to the top of the viewport, optimized for viewing a code definition. 'centerIfOutsideViewport': Scroll vertically as necessary and reveal a line centered vertically only if it lies outside the viewport. The default value is '{0}'.", + "compile.verbose": "True for verbose compile output. False by default", + "compile.warnings": "Tells gcc which warning level to use. It's 'None' by default", + "compilerWarnings": "Compiler warnings", + "editorFontSize": "Editor font size", + "editorQuickSuggestions": "Editor Quick Suggestions", + "enterAdditionalURLs": "Enter additional URLs, one for each row", + "files.inside.sketches": "Show files inside Sketches", + "ide.updateBaseUrl": "The base URL where to download updates from. Defaults to 'https://downloads.arduino.cc/arduino-ide'", + "ide.updateChannel": "Release channel to get updated from. 'stable' is the stable release, 'nightly' is the latest development build.", + "interfaceScale": "Interface scale", + "invalid.editorFontSize": "Invalid editor font size. It must be a positive integer.", + "invalid.sketchbook.location": "Invalid sketchbook location: {0}", + "invalid.theme": "Invalid theme.", + "language.asyncWorkers": "Number of async workers used by the Arduino Language Server (clangd). Background index also uses this many workers. The minimum value is 0, and the maximum is 8. When it is 0, the language server uses all available cores. The default value is 0.", + "language.log": "True if the Arduino Language Server should generate log files into the sketch folder. Otherwise, false. It's false by default.", + "language.realTimeDiagnostics": "If true, the language server provides real-time diagnostics when typing in the editor. It's false by default.", + "manualProxy": "Manual proxy configuration", + "monitor": { + "dockPanel": "The area of the application shell where the _{0}_ widget will reside. It is either \"bottom\" or \"right\". It defaults to \"{1}\"." + }, + "network": "Network", + "newSketchbookLocation": "Select new sketchbook location", + "noCliConfig": "Could not load the CLI configuration", + "noProxy": "No proxy", + "proxySettings": { + "hostname": "Host name", + "password": "Password", + "port": "Port number", + "username": "Username" + }, + "showVerbose": "Show verbose output during", + "sketch": { + "inoBlueprint": "Absolute filesystem path to the default `.ino` blueprint file. If specified, the content of the blueprint file will be used for every new sketch created by the IDE. The sketches will be generated with the default Arduino content if not specified. Unaccessible blueprint files are ignored. **A restart of the IDE is needed** for this setting to take effect." + }, + "sketchbook.location": "Sketchbook location", + "sketchbook.showAllFiles": "True to show all sketch files inside the sketch. It is false by default.", + "survey.notification": "True if users should be notified if a survey is available. True by default.", + "unofficialBoardSupport": "Click for a list of unofficial board support URLs", + "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", + "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", + "verifyAfterUpload": "Verify code after upload", + "window.autoScale": "True if the user interface automatically scales with the font size.", + "window.zoomLevel": { + "deprecationMessage": "Deprecated. Use 'window.zoomLevel' instead." + } + }, + "renameCloudSketch": { + "renameSketchTitle": "New name of the Cloud Sketch" + }, + "replaceMsg": "Replace the existing version of {0}?", + "selectZip": "Select a zip file containing the library you'd like to add", + "serial": { + "autoscroll": "Autoscroll", + "carriageReturn": "Carriage Return", + "connecting": "Connecting to '{0}' on '{1}'...", + "message": "Message (Enter to send message to '{0}' on '{1}')", + "newLine": "New Line", + "newLineCarriageReturn": "Both NL & CR", + "noLineEndings": "No Line Ending", + "notConnected": "Not connected. Select a board and a port to connect automatically.", + "openSerialPlotter": "Serial Plotter", + "timestamp": "Timestamp", + "toggleTimestamp": "Toggle Timestamp" + }, + "sketch": { + "archiveSketch": "Archive Sketch", + "cantOpen": "A folder named \"{0}\" already exists. Can't open sketch.", + "compile": "Compiling sketch...", + "configureAndUpload": "Configure and Upload", + "createdArchive": "Created archive '{0}'.", + "doneCompiling": "Done compiling.", + "doneUploading": "Done uploading.", + "editInvalidSketchFolderLocationQuestion": "Do you want to try saving the sketch to a different location?", + "editInvalidSketchFolderQuestion": "Do you want to try saving the sketch with a different name?", + "exportBinary": "Export Compiled Binary", + "invalidCloudSketchName": "The name must start with a letter, number, or underscore, followed by letters, numbers, dashes, dots and underscores. Maximum length is 36 characters.", + "invalidSketchFolderLocationDetails": "You cannot save a sketch into a folder inside itself.", + "invalidSketchFolderLocationMessage": "Invalid sketch folder location: '{0}'", + "invalidSketchFolderNameMessage": "Invalid sketch folder name: '{0}'", + "invalidSketchName": "The name must start with a letter, number, or underscore, followed by letters, numbers, dashes, dots and underscores. Maximum length is 63 characters.", + "moving": "Moving", + "movingMsg": "The file \"{0}\" needs to be inside a sketch folder named \"{1}\".\nCreate this folder, move the file, and continue?", + "new": "New Sketch", + "noTrailingPeriod": "A filename cannot end with a dot", + "openFolder": "Open Folder", + "openRecent": "Open Recent", + "openSketchInNewWindow": "Open Sketch in New Window", + "reservedFilename": "'{0}' is a reserved filename.", + "saveFolderAs": "Save sketch folder as...", + "saveSketch": "Save your sketch to open it again later.", + "saveSketchAs": "Save sketch folder as...", + "showFolder": "Show Sketch Folder", + "sketch": "Sketch", + "sketchAlreadyContainsThisFileError": "The sketch already contains a file named '{0}'", + "sketchAlreadyContainsThisFileMessage": "Failed to save sketch \"{0}\" as \"{1}\". {2}", + "sketchbook": "Sketchbook", + "titleLocalSketchbook": "Local Sketchbook", + "titleSketchbook": "Sketchbook", + "upload": "Upload", + "uploadUsingProgrammer": "Upload Using Programmer", + "uploading": "Uploading...", + "userFieldsNotFoundError": "Can't find user fields for connected board", + "verify": "Verify", + "verifyOrCompile": "Verify/Compile" + }, + "sketchbook": { + "newCloudSketch": "New Cloud Sketch", + "newSketch": "New Sketch" + }, + "survey": { + "answerSurvey": "Answer survey", + "dismissSurvey": "Don't show again", + "surveyMessage": "Please help us improve by answering this super short survey. We value our community and would like to get to know our supporters a little better." + }, + "theme": { + "currentThemeNotFound": "Could not find the currently selected theme: {0}. Arduino IDE has picked a built-in theme compatible with the missing one.", + "dark": "Dark", + "deprecated": "{0} (deprecated)", + "hc": "Dark High Contrast", + "hcLight": "Light High Contrast", + "light": "Light", + "user": "{0} (user)" + }, + "title": { + "cloud": "Cloud" + }, + "updateIndexes": { + "updateIndexes": "Update Indexes", + "updateLibraryIndex": "Update Library Index", + "updatePackageIndex": "Update Package Index" + }, + "upload": { + "error": "{0} error: {1}" + }, + "userFields": { + "cancel": "Cancel", + "enterField": "Enter {0}", + "upload": "Upload" + }, + "validateSketch": { + "abortFixMessage": "The sketch is still invalid. Do you want to fix the remaining problems? By clicking '{0}', a new sketch will open.", + "abortFixTitle": "Invalid sketch", + "renameSketchFileMessage": "The sketch file '{0}' cannot be used. {1} Do you want to rename the sketch file now?", + "renameSketchFileTitle": "Invalid sketch filename", + "renameSketchFolderMessage": "The sketch '{0}' cannot be used. {1} To get rid of this message, rename the sketch. Do you want to rename the sketch now?", + "renameSketchFolderTitle": "Invalid sketch name" + }, + "workspace": { + "alreadyExists": "'{0}' already exists." + } + }, + "theia": { + "core": { + "cannotConnectBackend": "Cannot connect to the backend.", + "cannotConnectDaemon": "Cannot connect to the CLI daemon.", + "couldNotSave": "Could not save the sketch. Please copy your unsaved work into your favorite text editor, and restart the IDE.", + "daemonOffline": "CLI Daemon Offline", + "offline": "Offline", + "offlineText": "Offline", + "quitTitle": "Are you sure you want to quit?" + }, + "editor": { + "unsavedTitle": "Unsaved – {0}" + }, + "messages": { + "collapse": "Collapse", + "expand": "Expand" + }, + "workspace": { + "deleteCloudSketch": "The cloud sketch '{0}' will be permanently deleted from the Arduino servers and the local caches. This action is irreversible. Do you want to delete the current sketch?", + "deleteCurrentSketch": "The sketch '{0}' will be permanently deleted. This action is irreversible. Do you want to delete the current sketch?", + "fileNewName": "Name for new file", + "invalidExtension": ".{0} is not a valid extension", + "newFileName": "New name for file" + } + } +} diff --git a/i18n/sr.json b/i18n/sr.json index fa4bc38bb..d1bad70cb 100644 --- a/i18n/sr.json +++ b/i18n/sr.json @@ -13,6 +13,7 @@ "board": { "board": "Плоча{0}", "boardConfigDialogTitle": "Select Other Board and Port", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Информације о плочи", "boards": "boards", "configDialog1": "Одабери и плочу и порт ако желиш да спустиш рад.", @@ -31,10 +32,12 @@ "port": "Порт{0}", "ports": "ports", "programmer": "Програмер", + "reloadBoardData": "Reload Board Data", "reselectLater": "Одабери поново касније", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Search board", "selectBoard": "Одабери плочу", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Одабери порт да добијеш информације о плочи", "showAllAvailablePorts": "Приказује све доступне портове када је укључено", "showAllPorts": "Show all ports", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "спусти", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Провјери код након спуштања", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/th.json b/i18n/th.json index 8d3247c8c..656e98e00 100644 --- a/i18n/th.json +++ b/i18n/th.json @@ -13,6 +13,7 @@ "board": { "board": "บอร์ด{0}", "boardConfigDialogTitle": "เลือกบอร์ดและพอร์ตอื่นๆ", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "ข้อมูลบอร์ด", "boards": "บอร์ด", "configDialog1": "เลือกบอร์ดและพอร์ตที่คุณต้องการอัปโหลดโปรแกรมของคุณ", @@ -31,10 +32,12 @@ "port": "พอร์ต {0}", "ports": "พอร์ต", "programmer": "เครื่องโปรแกรม", + "reloadBoardData": "Reload Board Data", "reselectLater": "เลือกใหม่ในภายหลัง", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "ค้นหาบอร์ด", "selectBoard": "เลือกบอร์ด", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "กรุณาเลือกพอร์ตเพื่อดึงข้อมูลของบอร์ด", "showAllAvailablePorts": "แสดงพอร์ตทั้งหมดที่มีอยู่เมื่อเลือก", "showAllPorts": "แสดงพอร์ตทั้งหมด", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Click for a list of unofficial board support URLs", "upload": "upload", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True for verbose upload output. False by default.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Verify code after upload", "window.autoScale": "True if the user interface automatically scales with the font size.", "window.zoomLevel": { diff --git a/i18n/tr.json b/i18n/tr.json index 52fce53da..32cd6720c 100644 --- a/i18n/tr.json +++ b/i18n/tr.json @@ -13,6 +13,7 @@ "board": { "board": "Kart{0}", "boardConfigDialogTitle": "Başka Kart ve Port Seç", + "boardDataReloaded": "Kart bilgisi yeniden yüklendi.", "boardInfo": "Kart Bilgisi", "boards": "kartlar", "configDialog1": "Bir eskiz yüklemek istiyorsanız Kart ve Port seçmelisiniz.", @@ -31,10 +32,12 @@ "port": "Port{0}", "ports": "portlar", "programmer": "Programlayıcı", + "reloadBoardData": "Kart Bilgisini Yeniden Yükle", "reselectLater": "Daha sonra tekrar seç", "revertBoardsConfig": " '{1}''da bulunan '{0}''i kullan", "searchBoard": "Kart ara", "selectBoard": "Kart Seç", + "selectBoardToReload": "Lütfen önce bir kart seçin.", "selectPortForInfo": "Kart bilgisi almak için lütfen bir port seçin.", "showAllAvailablePorts": "Etkinleştirildiğinde tüm mevcut portları görüntüler", "showAllPorts": "Tüm portları göster", @@ -412,7 +415,9 @@ "survey.notification": "Bir anket bulunduğunda kullanıcılara gösterilecekse açın. Varsayılan olarak açıktır.", "unofficialBoardSupport": "Desteklenmeyen kart destek URL'leri listesi için tıklayın", "upload": "yükle", + "upload.autoVerify": "Açıldığında IDE yükleme öncesinde kodu otomatik olarak doğrular. Varsayılan olarak açıktır. Bu değer kapalı olduğunda, IDE ikili dosyayı karta yüklemeden önce tekrar derlemez. Bu ayarı sadece gerçekten ne yaptığınızı biliyor olduğunuz durumlarda kapatmanız önerilir.", "upload.verbose": " Ayrıntılı yükleme çıktısı için açın. Varsayılan: Kapalı", + "upload.verify": "Yüklemeden sonra, kart üzerindeki belleğin içeriğini yüklenen ikili dosya ile doğrula.", "verifyAfterUpload": "Yüklemeden sonra kodu doğrula", "window.autoScale": "Kullanıcı arayüzü yazı tipi boyutu ile otomatik olarak ölçeklenecekse açın", "window.zoomLevel": { diff --git a/i18n/uk.json b/i18n/uk.json index 8aec50d7e..408b39bbe 100644 --- a/i18n/uk.json +++ b/i18n/uk.json @@ -13,6 +13,7 @@ "board": { "board": "Плата {0}", "boardConfigDialogTitle": "Оберіть іншу плату або порт", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Інформація про плату", "boards": "плати", "configDialog1": "Оберіть плату та порт якщо бажаєте завантажити скетч", @@ -31,10 +32,12 @@ "port": "Порт{0}", "ports": "порти", "programmer": "Програматор", + "reloadBoardData": "Reload Board Data", "reselectLater": "Переобрати пізніше", "revertBoardsConfig": "Використовувати '{0}' знайдену на '{1}'", "searchBoard": "Шукати плату", "selectBoard": "Оберіть плату", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Оберіть порт для оновлення інформації про плату.", "showAllAvailablePorts": "Відображати усі доступні порти коли увімкнено", "showAllPorts": "Показати всі порти", @@ -412,7 +415,9 @@ "survey.notification": "\"Так\", якщо треба повідомляти про доступні опитування користувачів. \"Так\" за замовчуванням.", "unofficialBoardSupport": "Клацніть, щоб переглянути список неофіційних форумів підтримки", "upload": "завантажити", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "\"Так\" для докладного виводу процесу завантаження. \"Ні\" за замовчуванням.", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Перевіряти код після завантаження", "window.autoScale": "\"Так\", якщо інтерфейс користувача автоматично масштабується відповідно до розміру шрифту.", "window.zoomLevel": { diff --git a/i18n/vi.json b/i18n/vi.json index e650cc5bb..3105486f0 100644 --- a/i18n/vi.json +++ b/i18n/vi.json @@ -13,6 +13,7 @@ "board": { "board": "Bo mạch {0}", "boardConfigDialogTitle": "Chọn Bảng và Cổng khác", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "Thông tin bo mạch", "boards": "bảng", "configDialog1": "Chọn đồng thời một bo mạch và một cổng nếu bạn muốn nạp một sketch.", @@ -31,10 +32,12 @@ "port": "Cổng {0}", "ports": "cổng", "programmer": "Programmer", + "reloadBoardData": "Reload Board Data", "reselectLater": "Chọn lại sau", "revertBoardsConfig": "Use '{0}' discovered on '{1}'", "searchBoard": "Tìm kiếm bảng", "selectBoard": "Lựa chọn bo mạch", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "Hãy chọn một cổng để lấy thông tin bo mạch.", "showAllAvailablePorts": "Hiển thị tất cả các cổng khả dụng khi được kích hoạt", "showAllPorts": "Hiển thị tất cả các cổng", @@ -412,7 +415,9 @@ "survey.notification": "True if users should be notified if a survey is available. True by default.", "unofficialBoardSupport": "Nhấp vào đây để hiển thị danh sách các URLs hỗ trợ các bo mạch không chính thức", "upload": "nạp ", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "'True' để bật đầu ra nạp lệnh chi tiết (verbose upload output). Mặc định là 'false'", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "Xác minh mã sau khi nạp", "window.autoScale": "'True' nếu giao diện người dùng tự động thay đổi theo cỡ chữ.", "window.zoomLevel": { diff --git a/i18n/zh-Hant.json b/i18n/zh-Hant.json index a6d3ce1c7..17eb473ce 100644 --- a/i18n/zh-Hant.json +++ b/i18n/zh-Hant.json @@ -13,6 +13,7 @@ "board": { "board": "{0} 開發板", "boardConfigDialogTitle": "選擇其他開發板及連接埠", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "開發板資訊", "boards": "開發板", "configDialog1": "若要上傳 Sketch 請選擇開發板及連接埠", @@ -31,10 +32,12 @@ "port": "連接埠: {0}", "ports": "連接埠", "programmer": "燒錄器", + "reloadBoardData": "Reload Board Data", "reselectLater": "請稍後再選擇", "revertBoardsConfig": "使用在 '{1}' 發現的 '{0}'", "searchBoard": "搜尋開發板", "selectBoard": "選擇開發版", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "請選定連接埠以便取得開發板的資訊", "showAllAvailablePorts": "當開啟時，顯示所有可用的埠", "showAllPorts": "顯示所有連接埠", @@ -412,7 +415,9 @@ "survey.notification": "有新問卷時會通知使用者, 預設為: true。", "unofficialBoardSupport": "點擊來取得非官方開發版的支援網址", "upload": "上傳", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "上傳時輸出的詳細資訊。預設: False", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "上傳後驗證程式碼", "window.autoScale": "使用者介面隨字體大小自動縮放。", "window.zoomLevel": { diff --git a/i18n/zh.json b/i18n/zh.json index d06007f7b..68fd336c7 100644 --- a/i18n/zh.json +++ b/i18n/zh.json @@ -13,6 +13,7 @@ "board": { "board": "开发板 {0}", "boardConfigDialogTitle": "选择其他开发板和端口", + "boardDataReloaded": "Board data reloaded.", "boardInfo": "开发板信息", "boards": "开发板", "configDialog1": "如果要上传项目，请选择开发板和端口。", @@ -31,10 +32,12 @@ "port": "端口 {0}", "ports": "端口", "programmer": "编程器", + "reloadBoardData": "Reload Board Data", "reselectLater": "稍后重新选择", "revertBoardsConfig": "使用在 '{1}' 上发现的 '{0}'", "searchBoard": "搜索开发坂", "selectBoard": "选择开发板", + "selectBoardToReload": "Please select a board first.", "selectPortForInfo": "请选择一个端口以获取开发板信息。", "showAllAvailablePorts": "启用时显示所有可用端口", "showAllPorts": "显示所有端口", @@ -412,7 +415,9 @@ "survey.notification": "True 则在有调查时应通知用户。默认为 True。", "unofficialBoardSupport": "点击获取支持的非官方开发板地址列表", "upload": "上传", + "upload.autoVerify": "True if the IDE should automatically verify the code before the upload. True by default. When this value is false, IDE does not recompile the code before uploading the binary to the board. It's highly advised to only set this value to false if you know what you are doing.", "upload.verbose": "True 则输出详细上传信息。默认情况下为 False。", + "upload.verify": "After upload, verify that the contents of the memory on the board match the uploaded binary.", "verifyAfterUpload": "上传后验证代码", "window.autoScale": "True 则用户界面随字体大小自动缩放。", "window.zoomLevel": { diff --git a/i18n/zh_TW.json b/i18n/zh_TW.json index 268b010cb..ffad200de 100644 --- a/i18n/zh_TW.json +++ b/i18n/zh_TW.json @@ -13,6 +13,7 @@ "board": { "board": "{0} 開發板", "boardConfigDialogTitle": "選擇其他開發板及連接埠", + "boardDataReloaded": "開發板資料已重新載入。", "boardInfo": "開發板資訊", "boards": "開發板", "configDialog1": "若要上傳 Sketch 請選擇開發板及連接埠", @@ -31,10 +32,12 @@ "port": "連接埠: {0}", "ports": "連接埠", "programmer": "燒錄器", + "reloadBoardData": "重新載入開發板資料", "reselectLater": "請稍後再選擇", "revertBoardsConfig": "使用在 '{1}' 發現的 '{0}'", "searchBoard": "搜尋開發板", "selectBoard": "選擇開發板", + "selectBoardToReload": "請先選取開發板。", "selectPortForInfo": "請選定連接埠以便取得開發板的資訊", "showAllAvailablePorts": "當開啟時，顯示所有可用的埠", "showAllPorts": "顯示所有連接埠", @@ -368,7 +371,7 @@ "cloud.pull.warn": "讀取雲端 sketch 前會警告使用者。預設: 開啟。", "cloud.push.warn": "推送雲端 sketch 前會警告使用者。預設: 開啟。", "cloud.pushpublic.warn": "推送公開的 sketch 到雲端前會警告使用者。預設: 開啟。", - "cloud.sharedSpaceId": "The ID of the Arduino Cloud shared space to load the sketchbook from. If empty, your private space is selected.", + "cloud.sharedSpaceId": "用來載入 sketchbook 的 Arduino 雲共享空間帳號。如留白，只會使用您的私人空間。", "cloud.sketchSyncEndpoint": "用來從後台讀取或推送 sketch 的端點。預設: Arduino 雲 API。", "compile": "編譯", "compile.experimental": "IDE 處理多個編譯器錯誤。 預設: 關閉", @@ -412,7 +415,9 @@ "survey.notification": "有新問卷時會通知使用者, 預設為: true。", "unofficialBoardSupport": "點擊來取得非官方開發板的支援網址", "upload": "上傳", + "upload.autoVerify": "預設為是，IDE會在上載前自動驗証。如選否，IDE在上載前不會重編譯程式碼。強烈建議除非你知道自己在幹嘛才這麼做。", "upload.verbose": "上傳時輸出的詳細資訊。預設: False", + "upload.verify": "上載後，驗証開發板上的記憶體內容和上傳的二進位碼是一致的。", "verifyAfterUpload": "上傳後驗證程式碼", "window.autoScale": "使用者介面隨字體大小自動縮放。", "window.zoomLevel": {