Skip to content

Latest commit

 

History

History
291 lines (233 loc) · 25.8 KB

check_vmware_hs2ds2vms.md

File metadata and controls

291 lines (233 loc) · 25.8 KB
Raw

check-vmware | check_vmware_hs2ds2vms plugin

Table of Contents

Overview

Nagios plugin used to monitor host/datastore/vm pairings.

This is a functional plugin responsible for verifying that each VM is housed on a datastore (best) intended for the host associated with the VM.

By default, the evaluation is limited to powered on VMs, but this can be toggled to also include powered off VMs.

The association between datastores and hosts is determined by a user-provided Custom Attribute. Flags for this plugin allow specifying separate Custom Attribute names for hosts and datastores along with optional separate prefixes for the provided Custom Attributes.

This allows for example, hosts to use a Location Custom Attribute that shares a datacenter name with datastores using the same Location Custom Attribute. If not specifying a prefix separator, the plugin assumes that a literal, case-insensitive match of the Location field is required. If a prefix separator is provided, then the separator is used to retrieve the common prefix for the Location Custom Attribute for both hosts and datastores.

This is intended to work around hosts that may include both the datacenter name and rack location details in their Custom Attribute (e.g., Location).

This plugin optionally allows ignoring a list of datastores, and both hosts and datastores that are missing the specified Custom Attribute.

In addition to specifying separate Custom Attribute names (required) and prefix separators (optional), the plugin also accepts a single Custom Attribute used by both hosts and datastores and an optional prefix separator, also used by both hosts and datastores.

If specifying a shared Custom Attribute or prefix, per-resource Custom Attribute flags are rejected (error condition).

Output

The output for these plugins is designed to provide the one-line summary needed by Nagios for quick identification of a problem while providing longer, more detailed information for display within the web UI, use in email and Teams notifications (atc0005/send2teams).

See the main project README for details.

Performance Data

Background

Initial support has been added for emitting Performance Data / Metrics, but refinement suggestions are welcome.

Consult the list below for the metrics implemented thus far, the original discussion thread and the Add Performance Data / Metrics support project board for an index of the initial implementation work.

Please add to an existing Discussion thread or open a new one with any feedback that you may have. Thanks in advance!

Supported metrics

Metrics below are obtained in this order:

  1. Obtain count of all resource pools
  2. Obtain count of all folders
  3. Obtain count of all virtual machines
  4. Filter virtual machines
    1. by resource pools
    2. by folders
    3. by name
    4. by power state
  5. Evaluate hosts, datastores and virtual machines for mismatched pairings

For example, the count of virtual machines powered on is obtained based on VMs remaining after resource pool filtering is complete at the time of applying power state filtering.

NOTE: These metrics are based on the visibility of the service account used to login to the target VMware environment. If the service account cannot see a resource, it cannot evaluate the resource.

Metric Alias of Unit of Measurement Description
time milliseconds plugin runtime
vms vms_all all (visible) virtual machines in the inventory
vms_all vms all (visible) virtual machines in the inventory
vms_evaluated vms_after_filtering virtual machines after filtering, evaluated for plugin-specific threshold violations
vms_after_filtering vms_evaluated virtual machines after filtering, evaluated for plugin-specific threshold violations
vms_powered_on virtual machines powered on
vms_powered_off virtual machines powered off
vms_excluded_by_name virtual machines excluded based on fixed name values
vms_excluded_by_folder virtual machines excluded based on folder IDs
vms_excluded_by_power_state virtual machines excluded based on power state (powered off VMs are excluded by default)
vms_excluded_by_resource_pool virtual machines excluded based on resource pool name
folders_all all folders in the inventory
folders_excluded folders excluded by request
folders_included folders included by request (all non-listed folders excluded)
folders_evaluated folders remaining after inclusion/exclusion filtering logic is applied
resource_pools_all all resource pools in the inventory
resource_pools_excluded resource pools excluded by request
resource_pools_included resource pools included by request (all non-listed resource pools excluded)
resource_pools_evaluated resource pools remaining after inclusion/exclusion filtering logic is applied
pairing_issues virtual machines residing on a non-matched host/datastore (determined via given custom attributes)
datastores all datastores in the inventory
hosts all hosts in the inventory

Optional evaluation

Some plugins provide optional support to limit evaluation of VMs to specific Resource Pools (explicitly including or excluding) and power states (on or off). Other plugins support similar filtering options (e.g., Acknowledged state of Triggered Alarms). See the configuration options, examples and contrib sections for more information.

Installation

See the main project README for details.

Configuration options

Threshold calculations

Nagios State Description
OK Ideal state, no mismatched Host/Datastore/Virtual machine pairings detected.
WARNING Not used by this plugin.
CRITICAL Any errors encountered or Hosts/Datastores/VM mismatches.

Command-line arguments

  • Use the -h or --help flag to display current usage information.
  • Flags marked as required must be set via CLI flag.
  • Flags not marked as required are for settings where a useful default is already defined, but may be overridden if desired.
Flag Required Default Repeat Possible Description
branding No false No branding Toggles emission of branding details with plugin status details. This output is disabled by default.
h, help No false No h, help Show Help text along with the list of supported flags.
v, version No false No v, version Whether to display application version and then immediately exit application.
ll, log-level No info No disabled, panic, fatal, error, warn, info, debug, trace Log message priority filter. Log messages with a lower level are ignored. Log messages are sent to stderr by default. See Output for more information.
p, port No 443 No positive whole number between 1-65535, inclusive TCP port of the remote ESXi host or vCenter instance. This is usually 443 (HTTPS).
t, timeout No 10 No positive whole number of seconds Timeout value in seconds allowed before a plugin execution attempt is abandoned and an error returned.
s, server Yes No fully-qualified domain name or IP Address The fully-qualified domain name or IP Address of the remote ESXi host or vCenter instance.
u, username Yes No valid username Username with permission to access specified ESXi host or vCenter instance.
pw, password Yes No valid password Password used to login to ESXi host or vCenter instance.
domain No No valid user domain (Optional) domain for user account used to login to ESXi host or vCenter instance. This is needed for user accounts residing in a non-default domain (e.g., SSO specific domain).
trust-cert No false No true, false Whether the certificate should be trusted as-is without validation. WARNING: TLS is susceptible to man-in-the-middle attacks if enabling this option.
include-rp No No comma-separated list of resource pool names Specifies a comma-separated list of Resource Pool names that should be exclusively used when evaluating VMs. Specifying this option will also exclude any VMs from evaluation that are outside of a Resource Pool. This option is incompatible with specifying a list of Resource Pool names to ignore or exclude from evaluation.
exclude-rp No No comma-separated list of resource pool names Specifies a comma-separated list of Resource Pool names that should be ignored when evaluating VMs. This option is incompatible with specifying a list of Resource Pool names to include for evaluation.
include-folder-id No No comma-separated list of folder ID values Specifies a comma-separated list of Folder Managed Object ID (MOID) values (e.g., group-v34) that should be exclusively used when evaluating VMs. This option is incompatible with specifying a list of Folder IDs to ignore or exclude from evaluation.
exclude-folder-id No No comma-separated list of folder ID values Specifies a comma-separated list of Folder Managed Object ID (MOID) values (e.g., group-v34) that should be ignored when evaluating VMs. This option is incompatible with specifying a list of Folder Managed Object ID (MOID) values to include for evaluation.
ignore-vm No No comma-separated list of (vSphere) virtual machine names Specifies a comma-separated list of VM names that should be ignored or excluded from evaluation.
ignore-ds No No comma-separated list of (vSphere) datastore names Specifies a comma-separated list of Datastore names that should be ignored or excluded from evaluation.
powered-off No false No true, false Toggles evaluation of powered off VMs in addition to powered on VMs. Evaluation of powered off VMs is disabled by default.
ca-name Maybe No valid Custom Attribute name Custom Attribute name for host ESXi systems and datastores. Optional if specifying resource-specific custom attribute names.
ca-prefix-sep Maybe No valid Custom Attribute prefix separator character Custom Attribute prefix separator for host ESXi systems and datastores. Skip if using Custom Attribute values as-is for comparison, otherwise optional if specifying resource-specific custom attribute prefix separator, or using the default separator.
ignore-missing-ca No false No true, false Toggles how missing specified Custom Attributes will be handled. By default, ESXi hosts and datastores missing the Custom Attribute are treated as an error condition.
host-ca-name Maybe No valid Custom Attribute name Custom Attribute name specific to host ESXi systems. Optional if specifying shared custom attribute flag.
host-ca-prefix-sep Maybe No valid Custom Attribute prefix separator character Custom Attribute prefix separator specific to host ESXi systems. Skip if using Custom Attribute values as-is for comparison, otherwise optional if specifying shared custom attribute prefix separator, or using the default separator.
ds-ca-name Maybe No valid Custom Attribute name Custom Attribute name specific to datastores. Optional if specifying shared custom attribute flag.
ds-ca-prefix-sep Maybe No valid Custom Attribute prefix separator character Custom Attribute prefix separator specific to datastores. Skip if using Custom Attribute values as-is for comparison, otherwise optional if specifying shared custom attribute prefix separator, or using the default separator.

Configuration file

Not currently supported. This feature may be added later if there is sufficient interest.

Contrib

See the main project README for details.

Examples

CLI invocation

/usr/lib/nagios/plugins/check_vmware_hs2ds2vms --username SERVICE_ACCOUNT_NAME --password "SERVICE_ACCOUNT_PASSWORD" --server vc1.example.com --exclude-rp "Desktops" --ignore-vm "test1.example.com,redmine.example.com,TESTING-AC,RHEL7-TEST" --ca-name "Location" --ca-prefix-sep "-" --trust-cert --log-level info

See the configuration options section for all command-line settings supported by this plugin along with descriptions of each. See the contrib section for information regarding example command definitions and Nagios configuration files.

Of note:

  • The resource pool named Desktops is excluded from evaluation.
    • this results in all other resource pools visible to the specified user account being used for evaluation
    • this also results in all VMs outside of a Resource Pool visible to the specified user account being used for evaluation
  • Multiple Virtual machines (vSphere inventory name, not OS hostname), are ignored, regardless of which Resource Pool they are part of.
    • test1.example.com
    • redmine.example.com
    • TESTING-AC
    • RHEL7-TEST
  • The Custom Attribute named Location is used to dynamically build pairs of Hosts and Datastores. Any Host or Datastore missing that Custom Attribute is reported as an error condition unless the appropriate CLI flag is provided. See the Configuration options section for the flag name and further details.
  • The Custom Attribute prefix separator - is provided in order to "split" the value found for the Custom Attribute named Location into pairs. The second value is thrown away, leaving the first to be used as the Location value for comparison. VMs running on a host with one value have their datastores checked for the same value. If a mismatch is found, this is assumed to be a CRITICAL level event and reported as such.
  • Certificate warnings are ignored.
    • not best practice, but many vCenter instances use self-signed certs per various freely available guides
  • Service Check results output is sent to stdout
  • Logging output is enabled at the info level.
    • logging output is sent to stderr by default
    • logging output is intended to be seen when invoking the plugin directly via CLI (often for troubleshooting)
      • see the Output section of the main README for potential conflicts with some monitoring systems

Command definition

# /etc/nagios-plugins/config/vmware-host-datastore-vms-pairings.cfg

# Look at all pools, all VMs, do not evaluate any VMs that are powered off.
# Use the same Custom Attribute for hosts and datastores. Use the same Custom
# Attribute prefix separator for hosts and datastores.
#
# This variation of the command is most useful for environments where all VMs
# are monitored equally.
define command{
    command_name   check_vmware_hs2ds2vms
    command_line   $USER1$/check_vmware_hs2ds2vms --server '$HOSTNAME$' --domain '$ARG1$' --username '$ARG2$' --password '$ARG3$' --ca-name '$ARG4$' --ca-prefix-sep '$ARG5$' --trust-cert --log-level info
    }

See the configuration options section for all command-line settings supported by this plugin along with descriptions of each. See the contrib section for information regarding example command definitions and Nagios configuration files.

License

See the main project README for details.

References