This org file contains the configuration files of pretty much every
program I use. The files are tangled (i.e. exported, or derived) from
this file using org-babel.
Note: This file is best viewed inside Emacs with org mode.
This section contains the configuration files (dotfiles) of various programs I use.
:header-args+: :tangle ~/.config/bspwm/bspwmrc :shebang “#!/bin/sh”sxhkd &
sh ~/.fehbg &
xfce4-panel -d &
compton &
sleep 0.5 && pasystray --notify=all &
bspc monitor -d I II III IV V VI VII VIII IX X
#bspc monitor eDP-1 -d I II III IV V
#bspc monitor HDMI-1 -d VI VII VIII IX X
#bspc config border_width 2
#bspc config window_gap 8
bspc config window_gap 0
bspc config bottom_padding 26
bspc config split_ratio 0.52
bspc config borderless_monocle true
bspc config gapless_monocle true
bspc config click_to_focus button1
bspc config directional_focus_tightness low
#bspc rule -a Firefox desktop='^1' follow=on
bspc rule -a Nightly desktop='^1' follow=on
bspc rule -a Emacs desktop='^2' state=tiled follow=on
#bspc rule -a Chromium desktop='^4' follow=on
bspc rule -a URxvt state=floating
bspc rule -a URxvt:tiled state=tiled
bspc rule -a Connman-gtk state=floating
bspc rule -a Xfce4-panel state=floating
bspc rule -a TelegramDesktop state=floating
bspc rule -a Ec state=floating
bspc rule -a Pavucontrol state=floating
bspc rule -a Eog state=floating
bspc rule -a Seahorse state=floating
bspc rule -a mpv state=floating
bspc rule -a Evince state=floating
bspc rule -a Meld state=floating
bspc rule -a Autokey-gtk state=floating
bspc rule -a Mousepad state=floating
bspc rule -a Wrapper-1.0 state=floating
bspc rule -a File-roller state=floating
bspc rule -a Gnome-disks state=floating
bspc rule -a Termite state=floating
bspc rule -a Termite:tiled state=tiled
bspc rule -a Thunderbird:Calendar state=floating
bspc rule -a Audacity state=floating
bspc rule -a Proof state=floating # pvs x-show-proof
bspc rule -a Nm-connection-editor state=floating
bspc rule -a Wire state=floating
bspc rule -a discord state=floating
bspc rule -a X2goclient state=floating
bspc rule -a SimpleScreenRecorder state=floating
bspc rule -a Gimp state=floating
bspc rule -a Wrapper-2.0 state=floating
bspc rule -a Zathura state=tiled#
# wm independent hotkeys
#
# terminal emulator
super + {_,shift} + Return
urxvt{_, -name tiled}
#super + {_,shift} + Return
# termite{_, --name=tiled}
# program launcher
super + space
rofi -show run -display-run '> ' -display-window ' 🗔 '
super + alt + space
xfce4-popup-whiskermenu
# window finder
super + backslash
rofi -show window -display-run '> ' -display-window ' 🗔 '
# password manager
alt + space
rofi-pass
# firefox
#super + r
# firefox
# chromium
#super + c
# chromium -incognito
# emacs
super + e
emacs
# make sxhkd reload its configuration files:
super + Escape
pkill -USR1 -x sxhkd
# volume {up,down}
XF86Audio{Raise,Lower}Volume
pamixer --allow-boost --{in,de}crease 5
# mute
XF86AudioMute
pamixer --toggle-mute
XF86AudioMicMute
pactl set-source-mute 1 toggle
# playback control
XF86Audio{Play,Prev,Next}
mpc {toggle,prev,next}
# lock the screen
super + shift + q
light-locker-command -l
# Toggle keyboard layout
super + F7
toggle-layout
# Toggle Xfce presentation mode
XF86LaunchB
toggle-presentation-mode
# monitor brightness
XF86MonBrightness{Up,Down}
light -{A,U} 5
super + apostrophe
rofi-light
# keyboard brightness
#XF86KbdBrightness{Up,Down}
# kbdlight {up,down}
XF86RotateWindows
toggle-tablet
#
# bspwm hotkeys
#
# quit bspwm normally
super + alt + Escape
bspc quit
# close and kill
super + {w,q}
bspc node -{c,k}
# alternate between the tiled and monocle layout
super + m
bspc desktop -l next
# send the newest marked node to the newest preselected node
super + y
bspc node newest.marked.local -n newest.!automatic.local
# swap the current node and the biggest node
super + g
bspc node -s biggest
#
# state/flags
#
# set the window state
super + {t,shift + t,s,f}
bspc node -t {tiled,pseudo_tiled,floating,fullscreen}
# set the node flags
super + ctrl + {m,x,y,z}
bspc node -g {marked,locked,sticky,private}
#
# focus/swap
#
# focus the node in the given direction
super + {_,shift + }{h,j,k,l}
bspc node -{f,s} {west,south,north,east}
# focus the node for the given path jump
super + {p,b,comma,period}
bspc node -f @{parent,brother,first,second}
# focus the next/previous node in the current desktop
super + {_,shift + }c
bspc node -f {next,prev}.local
# focus the next/previous desktop in the current monitor
super + bracket{left,right}
bspc desktop -f {prev,next}.local
# send to next/prev desktop
super + shift + bracket{left,right}
bspc node -d {prev,next} --follow
# focus the last node/desktop
super + {grave,Tab}
bspc {node,desktop} -f last
# focus the older or newer node in the focus history
super + {o,i}
bspc wm -h off; \
bspc node {older,newer} -f; \
bspc wm -h on
# focus or send to the given desktop
super + {_,shift + }{1-9,0}
bspc {desktop -f,node -d} '^{1-9,10}'
#
# preselect
#
# preselect the direction
super + ctrl + {h,j,k,l}
bspc node -p {west,south,north,east}
# preselect the ratio
super + ctrl + {1-9}
bspc node -o 0.{1-9}
# cancel the preselection for the focused node
super + ctrl + space
bspc node -p cancel
# cancel the preselection for the focused desktop
super + ctrl + shift + space
bspc query -N -d | xargs -I id -n 1 bspc node id -p cancel
#
# move/resize
#
# expand a window by moving one of its side outward
super + alt + {h,j,k,l}
bspc node -z {left -20 0,bottom 0 20,top 0 -20,right 20 0}
# contract a window by moving one of its side inward
super + alt + shift + {h,j,k,l}
bspc node -z {right -20 0,top 0 20,bottom 0 -20,left 20 0}
# move a floating window
super + {Left,Down,Up,Right}
bspc node -v {-20 0,0 20,0 -20,20 0}
#alt + bracket{left,right}
# xdotool key --clearmodifiers ctrl+Page_{Up,Down}
:header-args+: :tangle ~/.config/compton.conf
# Shadow
shadow = false; # Enabled client-side shadows on windows.
no-dock-shadow = true; # Avoid drawing shadows on dock/panel windows.
no-dnd-shadow = true; # Don't draw shadows on DND windows.
clear-shadow = true; # Zero the part of the shadow's mask behind the
# window. Fix some weirdness with ARGB windows.
shadow-radius = 5; # The blur radius for shadows. (default 12)
shadow-offset-x = -5; # The left offset for shadows. (default -15)
shadow-offset-y = -5; # The top offset for shadows. (default -15)
# shadow-opacity = 0.7; # The translucency for shadows. (default .75)
# shadow-red = 0.0; # Red color value of shadow. (0.0 - 1.0, defaults to 0)
# shadow-green = 0.0; # Green color value of shadow. (0.0 - 1.0, defaults to 0)
# shadow-blue = 0.0; # Blue color value of shadow. (0.0 - 1.0, defaults to 0)
shadow-exclude = [ "n:e:Notification", "class_g = 'Chromium'", "class_g = 'Dmenu'", "class_g = 'Firefox' && argb" ]; # Exclude conditions for shadows.
# shadow-exclude = "n:e:Notification";
#shadow-exclude = [ "_GTK_FRAME_EXTENTS@:c" ] # Fix dual shadow on some gtk3 powered applications
shadow-ignore-shaped = true; # Avoid drawing shadow on all shaped windows
# (see also: --detect-rounded-corners)
# Opacity
menu-opacity = 1.0; # The opacity for menus. (default 1.0)
#inactive-opacity = 0.9; # Default opacity of inactive windows. (0.0 - 1.0)
# active-opacity = 0.8; # Default opacity for active windows. (0.0 - 1.0)
frame-opacity = 1.0; # Opacity of window titlebars and borders. (0.1 - 1.0)
# inactive-opacity-override = true; # Let inactive opacity set by 'inactive-opacity' overrides
# value of _NET_WM_OPACITY. Bad choice.
alpha-step = 0.06; # XRender backend: Step size for alpha pictures. Increasing
# it may result in less X resource usage,
# Yet fading may look bad.
#inactive-dim = 0.5; # Dim inactive windows. (0.0 - 1.0)
#inactive-dim-fixed = true; # Do not let dimness adjust based on window opacity.
# blur-background = true; # Blur background of transparent windows.
# Bad performance with X Render backend.
# GLX backend is preferred.
# blur-background-frame = true; # Blur background of opaque windows with transparent
# frames as well.
blur-background-fixed = true; # Do not let blur radius adjust based on window opacity.
blur-background-exclude = [ "window_type = 'dock'", "window_type = 'desktop'" ];
# Exclude conditions for background blur.
# Fading
fading = false; # Fade windows during opacity changes.
fade-delta = 3; # The time between steps in a fade in milliseconds. (default 10).
fade-in-step = 0.03; # Opacity change between steps while fading in. (default 0.028).
fade-out-step = 0.03; # Opacity change between steps while fading out. (default 0.03).
# no-fading-openclose = true; # Avoid fade windows in/out when opening/closing.
fade-exclude = [ ]; # Exclude conditions for fading.
# Other
backend = "glx" # Backend to use: "xrender" or "glx". GLX backend is typically
# much faster but depends on a sane driver.
mark-wmwin-focused = true; # Try to detect WM windows and mark them as active.
mark-ovredir-focused = true; # Mark all non-WM but override-redirect windows active (e.g. menus).
use-ewmh-active-win = true; # Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused
# instead of using FocusIn/Out events. Usually more reliable but
# depends on a EWMH-compliant WM.
detect-rounded-corners = false; # Detect rounded corners and treat them as rectangular when --shadow-ignore- shaped is on.
detect-client-opacity = true; # Detect _NET_WM_OPACITY on client windows, useful for window
# managers not passing _NET_WM_OPACITY of client windows to frame
# windows.
refresh-rate = 0; # For --sw-opti: Specify refresh rate of the screen. 0 for auto.
vsync = "drm"; # "none", "drm", "opengl", "opengl-oml", "opengl-swc", "opengl-mswc"
# See man page for more details.
dbe = false; # Enable DBE painting mode. Rarely needed.
paint-on-overlay = true; # Painting on X Composite overlay window. Recommended.
sw-opti = false; # Limit compton to repaint at most once every 1 / refresh_rate.
# Incompatible with certain VSync methods.
unredir-if-possible = false; # Unredirect all windows if a full-screen opaque window is
# detected, to maximize performance for full-screen windows.
focus-exclude = [ ]; # A list of conditions of windows that should always be considered
# focused.
detect-transient = true; # Use WM_TRANSIENT_FOR to group windows, and consider windows in
# the same group focused at the same time.
detect-client-leader = true; # Use WM_CLIENT_LEADER to group windows.
invert-color-include = [ ]; # Conditions for windows to be painted with inverted color.
# GLX backend # GLX backend fine-tune options. See man page for more info.
glx-no-stencil = true; # Recommended.
glx-copy-from-front = false; # Useful with --glx-swap-method,
# glx-use-copysubbuffermesa = true; # Recommended if it works. Breaks VSync.
# glx-no-rebind-pixmap = true; # Recommended if it works.
glx-no-rebind-pixmap = true; # Recommended if it works.
#glx-swap-method = "4"; # See man page.
glx-swap-method = "4"; # See man page.
# Window type settings
wintypes:
{
tooltip = { fade = true; shadow = false; opacity = 1; focus = true; };
menu = { shadow = false; };
dropdown_menu = { shadow = false; };
popup_menu = { shadow = false; };
utility = { shadow = false; };
# fade: Fade the particular type of windows.
# shadow: Give those windows shadow
# opacity: Default opacity for the type of windows.
# focus: Whether to always consider windows of this type focused.
};
:header-args+: :tangle ~/.config/dunst/dunstrc
[global]
#font = Ubuntu Mono 10.5
font = Inconsolata 11
# Path to default icons.
icon_folders = /usr/share/icons/Moka/16x16/status/:/usr/share/icons/Moka/16x16/devices/:/usr/share/icons/Faba-Mono/16x16/status/:/usr/share/icons/Faba-Mono/16x16/devices/:/usr/share/icons/Moka/16x16/actions/:/usr/share/icons/Moka/16x16/categories/:/usr/share/icons/Moka/16x16/mimetypes/:/usr/share/icons/Moka/16x16/apps/:/usr/share/icons/Moka/16x16/places/:/usr/share/icons/Paper/16x16/status/
icon_position = left
# <b>bold</b>
# <i>italic</i>
# <s>strikethrough<s/>
# <u>underline</u>
markup = full
# The format of the message. Possible variables are:
# %a appname
# %s summary
# %b body
# %i iconname (including its path)
# %I iconname (without its path)
# %p progress value if set ([ 0%] to [100%]) or nothing
# Markup is allowed
format = "<b>%s</b>\n%b"
# Sort messages by urgency
sort = yes
# Show how many messages are currently hidden (because of geometry)
indicate_hiddenl= no
# Alignment of message text.
# Possible values are "left", "center" and "right"
alignment = center
# The frequency with wich text that is longer than the notification
# window allows bounces back and forth.
# This option conflicts with 'word_wrap'.
# Set to 0 to disable
bounce_freq = 3
# show age of message if message is older than show_age_threshold seconds.
# set to -1 to disable
show_age_threshold = -1
# split notifications into multiple lines if they don't fit into geometry
word_wrap = yes
# ignore newlines '\n' in notifications
ignore_newline = no
# The geometry of the message window.
# geometry [{width}]x{height}][+/-{x}+/-{y}]
# The height is measured in number of notifications everything else in pixels. If the width
# is omitted but the height is given ("-geometry x2"), the message window
# expands over the whole screen (dmenu-like). If width is 0,
# the window expands to the longest message displayed.
# A positive x is measured from the left, a negative from the
# right side of the screen. Y is measured from the top and down respectevly.
# The width can be negative. In this case the actual width is the
# screen width minus the width defined in within the geometry option.
#geometry = "410x12-12+12"
#geometry = "0x0-30-30"
geometry = "260x12-30-30"
# The transparency of the window. range: [0; 100]
# This option will only work if a compositing windowmanager is present (e.g. xcompmgr, compiz, etc..)
transparency = 0
# Don't remove messages, if the user is idle (no mouse or keyboard input)
# for longer than idle_threshold seconds.
# Set to 0 to disable.
idle_threshold = 120
# Which monitor should the notifications be displayed on.
monitor = 0
# Display notification on focused monitor. Possible modes are:
# mouse: follow mouse pointer
# keyboard: follow window with keyboard focus
# none: don't follow anything
#
# "keyboard" needs a windowmanager that exports the _NET_ACTIVE_WINDOW property.
# This should be the case for almost all modern windowmanagers.
#
# If this option is set to mouse or keyboard, the monitor option will be
# ignored.
follow = keyboard
# should a notification popped up from history be sticky or
# timeout as if it would normally do.
sticky_history = yes
# The height of a single line. If the height is smaller than the font height,
# it will get raised to the font height.
# This adds empty space above and under the text.
line_height = 0
show_indicators = yes
# Draw a line of 'separatpr_height' pixel height between two notifications.
# Set to 0 to disable
separator_height = 3
# padding between text and separator
padding = 8
# horizontal padding
horizontal_padding = 8
# Define a color for the separator.
# possible values are:
# * auto: dunst tries to find a color fitting to the background
# * foreground: use the same color as the foreground
# * frame: use the same color as the frame.
# * anything else will be interpreted as a X color
separator_color = foreground
# print a notification on startup
# This is mainly for error detection, since dbus (re-)starts dunst
# automatically after a crash.
startup_notification = false
# dmenu path
#dmenu = /usr/bin/dmenu -p dunst:
dmenu = /usr/bin/rofi -dmenu -p dunst:
# browser for opening urls in context menu
browser = /usr/bin/firefox -new-tab
[frame]
width = 0
color = "#377222"
[shortcuts]
# shortcuts are specified as [modifier+][modifier+]...key
# available modifiers are 'ctrl', 'mod1' (the alt-key), 'mod2', 'mod3'
# and 'mod4' (windows-key)
# xev might be helpful to find names for keys
# close notification
close = ctrl+space
# close all notifications
close_all = ctrl+shift+space
# redisplay last message(s)
# On the US keyboard layout 'grave' is normally above TAB and left of '1'.
history = ctrl+shift+h
# context menu
context = ctrl+shift+period
[urgency_low]
# IMPORTANT: colors have to be defined in quotation marks.
# Otherwise the '#' and following would be interpreted as a comment.
background = "#1d2a30"
foreground = "#71c2af"
timeout = 3
[urgency_normal]
background = "#1d2a30"
foreground = "#71c2af"
timeout = 0
[urgency_critical]
background = "#1d2a30"
foreground = "#ff9982"
timeout = 0
# Every section that isn't one of the above is interpreted as a rules
# to override settings for certain messages.
# Messages can be matched by 'appname', 'summary', 'body' or 'icon'
# and you can override the 'timeout', 'urgency', 'foreground', 'background'
# and 'format'.
# Shell-like globbing will get expanded.
#
# SCRIPTING
# you can specify a script that gets run when the rule matches by setting
# the 'script' option.
# The script will be called as follows:
# script appname summary body icon urgency
# where urgency can be "LOW", "NORMAL" or "CRITICAL".
#
# NOTE: if you don't want a notification to be displayed, set the format to ""
# NOTE: It might be helpful to run dunst -print in a terminal in order to find
# fitting options for rules.
#[espeak]
# summary = "*"
# script = dunst_espeak.sh
#[script-test]
# summary = "*script*"
# script = dunst_test.sh
#[ignore]
## This notification will not be displayed
# summary = "foobar"
# format = ""
#[signed_on]
# appname = Pidgin
# summary = "*signed on*"
# urgency = low
#
#[signed_off]
# appname = Pidgin
# summary = *signed off*
# urgency = low
#
#[says]
# appname = Pidgin
# summary = *says*
# urgency = critical
#
#[twitter]
# appname = Pidgin
# summary = *twitter.com*
# urgency = normal
#
[xfpm-backlight]
summary = *Brightness*
urgency = low
:header-args+: :tangle ~/.config/fontconfig/fonts.conf :comments none
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
<match target="font">
<edit mode="assign" name="rgba">
<const>rgb</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hinting">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="hintstyle">
<const>hintslight</const>
</edit>
</match>
<match target="font">
<edit mode="assign" name="antialias">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="lcdfilter">
<const>lcddefault</const>
</edit>
</match>
<dir>~/.fonts</dir>
<!-- Use Liberation Sans for Helvetica (instead of Nimbus Sans) -->
<alias binding="same">
<family>Helvetica</family>
<accept>
<family>Liberation Sans</family>
</accept>
</alias>
</fontconfig>[user]
name = Amin Bandali
email = [email protected]
signingkey = 4E05246AB0BF7FFB
[commit]
gpgsign = true
# [format]
# signoff = true
[core]
autocrlf = input # CRLF -> LF on commit
editor = emacsclient -t
excludesfile = ~/.gitignore_global
pager = "less"
[gpg]
program = gpg2
[alias]
git = !exec git # handle nested git calls, e.g. git git status
aliases = config --get-regexp '^alias\\.'
a = add
s = status
sl = status --long
c = checkout
cb = checkout -b
b = branch
r = rebase
p = pull
pr = pull --rebase
ps = push
psf = push --force
[color]
ui = auto
[color "status"]
added = green bold
changed = red bold
untracked = red bold
[color "branch"]
current = green bold
remote = magenta bold
[color "diff"]
new = green bold
old = red bold
[status]
# showUntrackedFiles = all
short=true
branch=true
[github]
user = aminb
[sendemail]
smtpuser = [email protected]
smtpserver = nix.aminb.org
smtpserverport = 587
smtpencryption = tls
annotate = yes
:header-args+: :tangle ~/.gitignore_global
*.orig
*.py[co]
*.sublime-workspace
*~
.DS_Store
*.elc
*-autoloads.el
:header-args+: :tangle ~/.config/i3gs/config
borders_width=0 0 2 0
separator_width=10
#[mpd]
#preset=MPD
#title=<span weight='heavy' fgcolor='#7FDBFF'> </span>
#borders_color=#7FDBFF
[ram]
preset=RAM
title=<span weight='heavy' fgcolor='#3D9970'> </span>
borders_color=#3D9970
#[cpu]
#preset=CPU
#title=<span weight='heavy' fgcolor='#2ECC40'> </span>
#borders_color=#2ECC40
#[hdd]
#preset=HDD
#title=<span weight='heavy' fgcolor='#01FF70'> </span>
#borders_color=#01FF70
[volume]
command=volume-info
title=<span weight='heavy' fgcolor='#7FDBFF'></span>
borders_color=#7FDBFF
[battery]
preset=BAT
command=battery-percentage-time
title=<span weight='heavy' fgcolor='#39CCCC'> </span>
borders_color=#39CCCC
[wifi]
preset=WIFI
title=<span weight='heavy' fgcolor='#01FF70'> </span>
borders_color=#01FF70
[date]
preset=DATE
command=date '+%-I:%M, %a %b %d '
title=<span weight='heavy' fgcolor='#FFDC00'> </span>
borders_color=#FFDC00
separator_width=0
:header-args+: :tangle ~/.latexmkrc
$pdf_previewer = "start zathura %O %S";
$clean_ext = "aux out";
# $pdf_update_method = 4;
# $pdf_update_command = "zathura %O %S";
# Synctex allows one to jump to from the PDF in Zathura to the source in Emacs
# by Ctrl+click in the PDF.
# Tell latexmk to use Zathura as a previewer, and run emacsclient as the Synctex
# editor.
# $pdf_previewer = 'exec zathura --synctex-forward -x \'emacsclient --no-wait +%{line} %{input}\' %O %S';
Improve XPS 15 9560’s touchpad experience.
Section "InputClass"
Identifier "libinput touchpad catchall"
Driver "libinput"
MatchIsTouchpad "on"
Option "ClickMethod" "clickfinger"
Option "NaturalScrolling" "true"
Option "Tapping" "on"
Option "TappingButtonMap" "lrm"
EndSection
:header-args+: :tangle ~/.getmail/getmailrc
[retriever]
type = SimplePOP3SSLRetriever
server = fencepost.gnu.org
username = aminb
password_command = ("gpg2", "--no-tty", "-q", "-d", "/home/amin/.passwd/gnu.gpg")
port = 995
use_apop = True
[destination]
type = Maildir
path = ~/mail/gnu/Inbox/
[options]
delete = True
:header-args+: :tangle ~/.config/systemd/user/getmail.service
[Unit]
Description=getmail service
[Service]
Type=oneshot
ExecStart=/usr/bin/getmail
StandardOutput=syslog
StandardError=syslog
:header-args+: :tangle ~/.config/systemd/user/getmail.timer
[Unit]
Description=getmail timer
[Timer]
OnCalendar=*:0/30
Persistent=true
Unit=getmail.service
[Install]
WantedBy=timers.target
:header-args+: :tangle ~/.gnupg/gpg-agent.conf
default-cache-ttl 43200
max-cache-ttl 43200
default-cache-ttl-ssh 10800
max-cache-ttl-ssh 10800
# pinentry-program /usr/bin/pinentry-qt
:header-args+: :tangle ~/.gtkrc-2.0
gtk-theme-name="Greybird"
gtk-icon-theme-name="Paper"
gtk-font-name="Ubuntu 10"
gtk-menu-images=0
# gtk-key-theme-name = "Emacs"
:header-args+: :tangle ~/.config/gtk-3.0/settings.ini
[Settings]
gtk-icon-theme-name = Paper
# gtk-theme-name = Adwaita
gtk-theme-name = Greybird
# gtk-theme-name = Arc-Darker
# gtk-theme-name = Numix-ArchBlue
gtk-font-name = Ubuntu 10
# gtk-key-theme-name = Emacs
:header-args+: :tangle ~/.mbsyncrc
# Global defaults
CopyArrivalDate yes
######
IMAPAccount amin
Host nix.aminb.org
User [email protected]
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/amin.gpg"
SSLType IMAPS
IMAPStore amin-remote
Account amin
MaildirStore amin-local
Path ~/mail/amin/
Inbox ~/mail/amin/Inbox
SubFolders Verbatim
Channel amin
Master :amin-remote:
Slave :amin-local:
Patterns * !dovecot*
Create Both
SyncState *
######
IMAPAccount uwaterloo
Host connect.uwaterloo.ca
User abandali
PassCmd "gpg -q --for-your-eyes-only --no-tty -d ~/.passwd/uwaterloo.gpg"
SSLType IMAPS
IMAPStore uwaterloo-remote
Account uwaterloo
MaildirStore uwaterloo-local
Path ~/mail/uwaterloo/
Inbox ~/mail/uwaterloo/Inbox
SubFolders Verbatim
Channel uwaterloo
Master :uwaterloo-remote:
Slave :uwaterloo-local:
Patterns * !dovecot*
Create Both
SyncState *
:header-args+: :tangle ~/.config/systemd/user/mbsync.service
[Unit]
Description=mbsync service
[Service]
Type=oneshot
ExecStart=/usr/bin/mbsync -Va
StandardOutput=syslog
StandardError=syslog
:header-args+: :tangle ~/.config/systemd/user/mbsync.timer
[Unit]
Description=mbsync timer
[Timer]
OnCalendar=*:0/15
Persistent=true
Unit=mbsync.service
[Install]
WantedBy=timers.target
:header-args+: :tangle ~/.config/mpd/mpd.conf
# An example configuration file for MPD.
# Read the user manual for documentation: http://www.musicpd.org/doc/user/
# Files and directories #######################################################
#
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
#
music_directory "~/usr/music"
#
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
#
playlist_directory "~/.mpd/playlists"
#
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
#
db_file "~/.mpd/database"
#
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
#
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#
log_file "~/.mpd/log"
#
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#
pid_file "~/.mpd/pid"
#
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#
state_file "~/.mpd/state"
#
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#
sticker_file "~/.mpd/sticker.sql"
#
###############################################################################
# General music daemon options ################################################
#
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
#
#user "nobody"
#
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#
#group "nogroup"
#
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon. Not effective if
# systemd socket activiation is in use.
#
# For network
#bind_to_address "any"
#
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
#
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#
#port "6600"
#
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#
#log_level "default"
#
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#
#gapless_mp3_playback "yes"
#
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#
#restore_paused "no"
#
# This setting enables MPD to create playlists in a format usable by other
# music players.
#
#save_absolute_paths_in_playlists "no"
#
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the user manual.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
#
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
#
#auto_update "yes"
#
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#
#auto_update_depth "3"
#
###############################################################################
# Symbolic link behavior ######################################################
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#
#follow_outside_symlinks "yes"
#
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#
#follow_inside_symlinks "yes"
#
###############################################################################
# Zeroconf / Avahi Service Discovery ##########################################
#
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#
#zeroconf_enabled "yes"
#
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#
#zeroconf_name "Music Player"
#
###############################################################################
# Permissions #################################################################
#
# If this setting is set, MPD will require password authorization. The password
# setting can be specified multiple times for different password profiles.
#
#password "password@read,add,control,admin"
#
# This setting specifies the permissions a user has who has not yet logged in.
#
#default_permissions "read,add,control,admin"
#
###############################################################################
# Database #######################################################################
#
#database {
# plugin "proxy"
# host "other.mpd.host"
# port "6600"
#}
# Input #######################################################################
#
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
}
#
###############################################################################
# Audio Output ################################################################
#
audio_output {
type "pulse"
name "pulse audio"
}
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
format "44100:16:2"
}
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
#
# An example of an ALSA output:
#
#audio_output {
# type "alsa"
# name "My ALSA Device"
## device "hw:0,0" # optional
## mixer_type "hardware" # optional
## mixer_device "default" # optional
## mixer_control "PCM" # optional
## mixer_index "0" # optional
#}
#
# An example of an OSS output:
#
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
#}
#
# An example of a shout output (for streaming to Icecast):
#
#audio_output {
# type "shout"
# encoder "vorbis" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
#}
#
# An example of a recorder output:
#
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
#}
#
# An example of a httpd output (built-in HTTP streaming server):
#
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
#}
#
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
#}
#
# An example of a winmm output (Windows multimedia API).
#
#audio_output {
# type "winmm"
# name "My WinMM output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
# or
## device "0" # optional
## mixer_type "hardware" # optional
#}
#
# An example of an openal output.
#
#audio_output {
# type "openal"
# name "My OpenAL output"
## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional
#}
#
# An example of an sndio output.
#
#audio_output {
# type "sndio"
# name "sndio output"
# mixer_type "software"
#}
#
# An example of an OS X output:
#
#audio_output {
# type "osx"
# name "My OS X Device"
## device "Built-in Output" # optional
## channel_map "-1,-1,0,1" # optional
#}
#
## Example "pipe" output:
#
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
#}
#
## An example of a null output (for no audio output):
#
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
#}
#
###############################################################################
# Normalization automatic volume adjustments ##################################
#
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album", "track" or "auto". "auto" is a special mode that
# chooses between "track" and "album" depending on the current state of
# random playback. If random playback is enabled then "track" mode is used.
# See <http://www.replaygain.org> for more details about ReplayGain.
# This setting is off by default.
#
#replaygain "album"
#
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#
#replaygain_preamp "0"
#
# This setting sets the pre-amp used for files that do NOT have ReplayGain tags.
# By default this setting is disabled.
#
#replaygain_missing_preamp "0"
#
# This setting enables or disables ReplayGain limiting.
# MPD calculates actual amplification based on the ReplayGain tags
# and replaygain_preamp / replaygain_missing_preamp setting.
# If replaygain_limit is enabled MPD will never amplify audio signal
# above its original level. If replaygain_limit is disabled such amplification
# might occur. By default this setting is enabled.
#
#replaygain_limit "yes"
#
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#
#volume_normalization "no"
#
###############################################################################
# Character Encoding ##########################################################
#
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#
#filesystem_charset "UTF-8"
#
###############################################################################
:header-args+: :tangle ~/.msmtprc
# Set default values for all following accounts.
defaults
port 587
tls on
auth on
#tls_trust_file /etc/ssl/certs/ca-certificates.crt
logfile ~/.msmtp.log
# aminb
account aminb
host nix.aminb.org
tls_fingerprint 65:DD:B8:32:D8:CD:F1:DC:B6:34:EE:35:04:18:AC:09:F3:1D:6D:20:F2:4A:E2:BD:64:48:B7:1F:90:BD:C4:BA
tls_starttls on
from [email protected]
user [email protected]
passwordeval gpg2 --no-tty -q -d ~/.passwd/amin.gpg
# gnu
account gnu
host fencepost.gnu.org
# use `msmtp -a gnu --serverinfo --tls --tls-certcheck=off --tls-fingerprint=` to get the current fingerprint
tls_fingerprint 28:70:42:76:1C:EC:91:5F:D1:B3:27:A1:CD:3B:32:A4:8B:0B:DC:3A:CD:CA:F6:6F:E4:61:BA:69:D7:4D:0D:0B
tls_starttls on
from [email protected]
user aminb
passwordeval gpg2 --no-tty -q -d ~/.passwd/gnu.gpg
# uwaterloo
account uwaterloo
host connect.uwaterloo.ca
tls_starttls on
from [email protected]
user abandali
passwordeval gpg2 --no-tty -q -d ~/.passwd/uwaterloo.gpg
tls_trust_file /etc/ssl/certs/ca-certificates.crt
# uwaterloo (friendly address)
account uwaterloo-friendly : uwaterloo
from [email protected]
# Set a default account
account default : aminb
:header-args+: :tangle ~/.ncmpcpp/config
##############################################################
## This is the example configuration file. Copy it to ##
## $HOME/.ncmpcpp/config or $XDG_CONFIG_HOME/ncmpcpp/config ##
## and set up your preferences. ##
##############################################################
#
##### directories ######
##
## Directory for storing ncmpcpp related files.
## Changing it is useful if you want to store
## everything somewhere else and provide command
## line setting for alternative location to config
## file which defines that while launching ncmpcpp.
##
#
ncmpcpp_directory = ~/.ncmpcpp
#
##
## Directory for storing downloaded lyrics. It
## defaults to ~/.lyrics since other MPD clients
## (eg. ncmpc) also use that location.
##
#
#lyrics_directory = ~/.lyrics
#
##### connection settings #####
#
#mpd_host = localhost
#
#mpd_port = 6600
#
#mpd_connection_timeout = 5
#
## Needed for tag editor and file operations to work.
##
mpd_music_dir = ~/usr/music
#
#mpd_crossfade_time = 5
#
##### music visualizer #####
##
## Note: In order to make music visualizer work you'll
## need to use mpd fifo output, whose format parameter
## has to be set to 44100:16:1 for mono visualization
## or 44100:16:2 for stereo visualization. Example
## configuration (it has to be put into mpd.conf):
##
## audio_output {
## type "fifo"
## name "Visualizer feed"
## path "/tmp/mpd.fifo"
## format "44100:16:2"
## }
##
#
visualizer_fifo_path = /tmp/mpd.fifo
#
##
## Note: Below parameter is needed for ncmpcpp
## to determine which output provides data for
## visualizer and thus allow syncing between
## visualization and sound as currently there
## are some problems with it.
##
#
visualizer_output_name = my fifo
#
##
## If you set format to 44100:16:2, make it 'yes'.
##
visualizer_in_stereo = yes
#
##
## Multiply received samples by given value. Very
## useful for proper visualization of quiet music.
##
#visualizer_sample_multiplier = 1
#
##
## Note: Below parameter defines how often ncmpcpp
## has to "synchronize" visualizer and audio outputs.
## 30 seconds is optimal value, but if you experience
## synchronization problems, set it to lower value.
## Keep in mind that sane values start with >=10.
##
#
visualizer_sync_interval = 30
#
##
## Note: To enable spectrum frequency visualization
## you need to compile ncmpcpp with fftw3 support.
##
#
## Available values: spectrum, wave, wave_filled, ellipse.
##
visualizer_type = spectrum
#
#visualizer_look = ●▮
visualizer_look = "●•"
#
#visualizer_color = blue, cyan, green, yellow, magenta, red
#
## Alternative subset of 256 colors for terminals that support it.
##
#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
#
##### system encoding #####
##
## ncmpcpp should detect your charset encoding
## but if it failed to do so, you can specify
## charset encoding you are using here.
##
## Note: You can see whether your ncmpcpp build
## supports charset detection by checking output
## of `ncmpcpp --version`.
##
## Note: Since MPD uses UTF-8 by default, setting
## this option makes sense only if your encoding
## is different.
##
#
#system_encoding = ""
#
##### delays #####
#
## Time of inactivity (in seconds) after playlist
## highlighting will be disabled (0 = always on).
##
#playlist_disable_highlight_delay = 5
#
## Defines how long messages are supposed to be visible.
##
#message_delay_time = 5
#
##### song format #####
##
## For a song format you can use:
##
## %l - length
## %f - filename
## %D - directory
## %a - artist
## %A - album artist
## %t - title
## %b - album
## %y - date
## %n - track number (01/12 -> 01)
## %N - full track info (01/12 -> 01/12)
## %g - genre
## %c - composer
## %p - performer
## %d - disc
## %C - comment
## %P - priority
## $R - begin right alignment
##
## If you want to make sure that a part of the format is displayed
## only when certain tags are present, you can archieve it by
## grouping them with brackets, e.g. '{%a - %t}' will be evaluated
## to 'ARTIST - TITLE' if both tags are present or '' otherwise.
## It is also possible to define a list of alternatives by providing
## several groups and separating them with '|', e.g. '{%t}|{%f}'
## will be evaluated to 'TITLE' or 'FILENAME' if the former is not
## present.
##
## Note: If you want to set limit on maximal length of a tag, just
## put the appropriate number between % and character that defines
## tag type, e.g. to make album take max. 20 terminal cells, use '%20b'.
##
## In addition, formats support markers used for text attributes.
## They are followed by character '$'. After that you can put:
##
## - 0 - default window color (discards all other colors)
## - 1 - black
## - 2 - red
## - 3 - green
## - 4 - yellow
## - 5 - blue
## - 6 - magenta
## - 7 - cyan
## - 8 - white
## - 9 - end of current color
## - b - bold text
## - u - underline text
## - r - reverse colors
## - a - use alternative character set
##
## If you don't want to use a non-color attribute anymore, just put it
## again, but this time insert character '/' between '$' and attribute
## character, e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag
## or filename with reversed colors.
##
## If you want to use 256 colors and/or background colors in formats
## (the naming scheme is described below in section about color
## definitions), it can be done with the syntax $(COLOR), e.g. to set
## the artist tag to one of the non-standard colors and make it have
## yellow background, you need to write $(197_yellow)%a$(end). Note
## that for standard colors this is interchangable with attributes
## listed above.
##
## Note: colors can be nested.
##
#
#song_list_format = {%a - }{%t}|{$8%f$9}$R{$3(%l)$9}
#
#song_status_format = {{%a{ "%b"{ (%y)}} - }{%t}}|{%f}
#
#song_library_format = {%n - }{%t}|{%f}
#
#
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
#
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
#
#now_playing_prefix = $b
#
#now_playing_suffix = $/b
#
#browser_playlist_prefix = "$2playlist$9 "
#
#selected_item_prefix = $6
#
#selected_item_suffix = $9
#
#modified_item_prefix = $3> $9
#
##
## Note: attributes are not supported for the following variables.
##
#song_window_title_format = {%a - }{%t}|{%f}
##
## Note: Below variables are used for sorting songs in browser.
## The sort mode determines how songs are sorted, and can be used
## in combination with a sort format to specify a custom sorting format.
## Available values for browser_sort_mode are "name", "mtime", "format"
## and "noop".
##
#
#browser_sort_mode = name
#
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
#
##### columns settings #####
##
## syntax of song columns list format is "column column etc."
##
## - syntax for each column is:
##
## (width of the column)[color of the column]{displayed tag}
##
## Note: Width is by default in %, if you want a column to
## have fixed size, add 'f' after the value, e.g. (10)[white]{a}
## will be the column that take 10% of screen (so the real width
## will depend on actual screen size), whereas (10f)[white]{a}
## will take 10 terminal cells, no matter how wide the screen is.
##
## - color is optional (if you want the default one,
## leave the field empty).
##
## Note: You can give a column additional attributes by putting appropriate
## character after displayed tag character. Available attributes are:
##
## - r - column will be right aligned
## - E - if tag is empty, empty tag marker won't be displayed
##
## You can also:
##
## - give a column custom name by putting it after attributes,
## separated with character ':', e.g. {lr:Length} gives you
## right aligned column of lengths named "Length".
##
## - define sequence of tags, that have to be displayed in case
## predecessor is empty in a way similar to the one in classic
## song format, i.e. using '|' character, e.g. {a|c|p:Owner}
## creates column named "Owner" that tries to display artist
## tag and then composer and performer if previous ones are
## not available.
##
#
#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l}
#
##### various settings #####
#
##
## Note: Custom command that will be executed each
## time song changes. Useful for notifications etc.
##
#execute_on_song_change = ""
#
#playlist_show_mpd_host = no
#
#playlist_show_remaining_time = no
#
#playlist_shorten_total_times = no
#
#playlist_separate_albums = no
#
##
## Note: Possible display modes: classic, columns.
##
#playlist_display_mode = columns
#
#browser_display_mode = classic
#
#search_engine_display_mode = classic
#
#playlist_editor_display_mode = classic
#
#discard_colors_if_item_is_selected = yes
#
#incremental_seeking = yes
#
#seek_time = 1
#
#volume_change_step = 2
#
#autocenter_mode = no
#
#centered_cursor = no
#
##
## Note: You can specify third character which will
## be used to build 'empty' part of progressbar.
##
#progressbar_look = =>
progressbar_look = "─╼╶"
#progressbar_look = "─⊙╶"
#
#progressbar_boldness = yes
#
## Available values: database, playlist.
##
#default_place_to_search_in = database
#
## Available values: classic, alternative.
##
#user_interface = classic
#
#data_fetching_delay = yes
#
## Available values: artist, album_artist, date, genre, composer, performer.
##
#media_library_primary_tag = artist
#
## Available values: wrapped, normal.
##
#default_find_mode = wrapped
#
#default_tag_editor_pattern = %n - %t
#
#header_visibility = yes
#
#statusbar_visibility = yes
#
#titles_visibility = yes
#
#header_text_scrolling = yes
#
#cyclic_scrolling = no
#
#lines_scrolled = 2
#
#follow_now_playing_lyrics = no
#
#fetch_lyrics_for_current_song_in_background = no
#
#store_lyrics_in_song_dir = no
#
#generate_win32_compatible_filenames = yes
#
#allow_for_physical_item_deletion = no
#
##
## Note: If you set this variable, ncmpcpp will try to
## get info from last.fm in language you set and if it
## fails, it will fall back to english. Otherwise it will
## use english the first time.
##
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
##
#lastfm_preferred_language = en
#
#show_hidden_files_in_local_browser = no
#
##
## How shall screen switcher work?
##
## - "previous" - switch between the current and previous screen.
## - "screen1,...,screenN" - switch between given sequence of screens.
##
## Screens available for use: help, playlist, browser, search_engine,
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock.
##
#screen_switcher_mode = playlist, browser
#
##
## Note: You can define startup screen
## by choosing screen from the list above.
##
#startup_screen = playlist
#
##
## Note: You can define startup slave screen
## by choosing screen from the list above or
## an empty value for no slave screen.
##
#startup_slave_screen = ""
#
#startup_slave_screen_focus = no
#
##
## Default width of locked screen (in %).
## Acceptable values are from 20 to 80.
##
#
#locked_screen_width_part = 50
#
#ask_for_locked_screen_width_part = yes
#
#jump_to_now_playing_song_at_start = yes
#
#ask_before_clearing_playlists = yes
#
#clock_display_seconds = no
#
#display_volume_level = yes
#
#display_bitrate = no
#
#display_remaining_time = no
#
## Available values: none, basic, extended, perl.
##
#regular_expressions = perl
#
##
## Note: If below is enabled, ncmpcpp will ignore leading
## "The" word while sorting items in browser, tags in
## media library, etc.
##
#ignore_leading_the = no
#
#block_search_constraints_change_if_items_found = yes
#
#mouse_support = yes
#
#mouse_list_scroll_whole_page = yes
#
#empty_tag_marker = <empty>
#
#tags_separator = " | "
#
#tag_editor_extended_numeration = no
#
#media_library_sort_by_mtime = no
#
#enable_window_title = yes
#
##
## Note: You can choose default search mode for search
## engine. Available modes are:
##
## - 1 - use mpd built-in searching (no regexes, pattern matching)
## - 2 - use ncmpcpp searching (pattern matching with support for regexes,
## but if your mpd is on a remote machine, downloading big database
## to process it can take a while
## - 3 - match only exact values (this mode uses mpd function for searching
## in database and local one for searching in current playlist)
##
#
#search_engine_default_search_mode = 1
#
#external_editor = nano
#
## Note: set to yes if external editor is a console application.
##
#use_console_editor = yes
#
##### colors definitions #####
##
## It is possible to set a background color by setting a color
## value "<foreground>_<background>", e.g. red_black will set
## foregound color to red and background color to black.
##
## In addition, for terminals that support 256 colors it
## is possible to set one of them by using a number in range
## [1, 256] instead of color name, e.g. numerical value
## corresponding to red_black is 2_1. To find out if the
## terminal supports 256 colors, run ncmpcpp and check out
## the bottom of the help screen for list of available colors
## and their numerical values.
##
## Note: due to technical limitations of ncurses, if 256 colors
## are used, it is possible to either use only the colors with
## default background color, or all pairs from 1_1 up to 254_127,
## depending on the ncurses version used.
##
#
#colors_enabled = yes
#
#empty_tag_color = cyan
#
#header_window_color = default
#
#volume_color = default
#
#state_line_color = default
#
#state_flags_color = default
#
#main_window_color = yellow
#
#color1 = white
#
#color2 = green
#
#main_window_highlight_color = yellow
#
#progressbar_color = black
#
#progressbar_elapsed_color = green
#
#statusbar_color = default
#
#alternative_ui_separator_color = black
#
#active_column_color = red
#
#window_border_color = green
#
#active_window_border = red
#
:header-args+: :tangle ~/.ncmpcpp/bindings
def_key "j"
scroll_down
def_key "k"
scroll_up
def_key "ctrl-u"
page_up
def_key "ctrl-d"
page_down
def_key "h"
previous_column
def_key "l"
next_column
def_key "."
show_lyrics
def_key "n"
next_found_item
def_key "N"
previous_found_item
def_key "J"
move_sort_order_down
def_key "K"
move_sort_order_up
:header-args+: :tangle ~/.notmuch-config
# .notmuch-config - Configuration file for the notmuch mail system
#
# For more information about notmuch, see https://notmuchmail.org
# Database configuration
#
# The only value supported here is 'path' which should be the top-level
# directory where your mail currently exists and to where mail will be
# delivered in the future. Files should be individual email messages.
# Notmuch will store its database within a sub-directory of the path
# configured here named ".notmuch".
#
[database]
path=/home/amin/mail
# User configuration
#
# Here is where you can let notmuch know how you would like to be
# addressed. Valid settings are
#
# name Your full name.
# primary_email Your primary email address.
# other_email A list (separated by ';') of other email addresses
# at which you receive email.
#
# Notmuch will use the various email addresses configured here when
# formatting replies. It will avoid including your own addresses in the
# recipient list of replies, and will set the From address based on the
# address to which the original email was addressed.
#
[user]
name=Amin Bandali
[email protected]
[email protected];[email protected];[email protected];
# Configuration for "notmuch new"
#
# The following options are supported here:
#
# tags A list (separated by ';') of the tags that will be
# added to all messages incorporated by "notmuch new".
#
# ignore A list (separated by ';') of file and directory names
# that will not be searched for messages by "notmuch new".
#
# NOTE: *Every* file/directory that goes by one of those
# names will be ignored, independent of its depth/location
# in the mail store.
#
[new]
tags=new;
#tags=unread;inbox;
ignore=.uidvalidity;.mbsyncstate;/.*/dovecot*/
# Search configuration
#
# The following option is supported here:
#
# exclude_tags
# A ;-separated list of tags that will be excluded from
# search results by default. Using an excluded tag in a
# query will override that exclusion.
#
[search]
exclude_tags=deleted;spam;
# Maildir compatibility configuration
#
# The following option is supported here:
#
# synchronize_flags Valid values are true and false.
#
# If true, then the following maildir flags (in message filenames)
# will be synchronized with the corresponding notmuch tags:
#
# Flag Tag
# ---- -------
# D draft
# F flagged
# P passed
# R replied
# S unread (added when 'S' flag is not present)
#
# The "notmuch new" command will notice flag changes in filenames
# and update tags, while the "notmuch tag" and "notmuch restore"
# commands will notice tag changes and update flags in filenames
#
[maildir]
synchronize_flags=true
# Cryptography related configuration
#
# The following option is supported here:
#
# gpg_path
# binary name or full path to invoke gpg.
#
[crypto]
gpg_path=gpg
:header-args+: :tangle ~/mail/.notmuch/hooks/pre-new :shebang “#!/bin/sh”
touch /tmp/gnusieve.log
sieve-filter -eW -o [email protected] \
-o mail_location=maildir:$MAILDIR/gnu:LAYOUT=fs:INBOX=$MAILDIR/gnu/Inbox ~/sieve/gnu.sieve INBOX delete &>>/tmp/gnusieve.log# apply sent tag to messages sent by me
notmuch tag -new +sent -- from:[email protected] or from:[email protected] or from:[email protected] or from:[email protected]
# initial tagging
notmuch tag -latest -- tag:latest
notmuch tag +inbox +unread +latest -new -- tag:new
# apply tags to lists
# <aminb>
notmuch tag -inbox +lists/~sircmpwn/srht-admins -- folder:amin/lists/~sircmpwn/srht-admins
notmuch tag -inbox +lists/~sircmpwn/srht-announce -- folder:amin/lists/~sircmpwn/srht-announce
notmuch tag -inbox +lists/~sircmpwn/srht-dev -- folder:amin/lists/~sircmpwn/srht-dev
notmuch tag -inbox +lists/~sircmpwn/srht-discuss -- folder:amin/lists/~sircmpwn/srht-discuss
notmuch tag -inbox +lists/hackernewsletter -- folder:amin/lists/hackernewsletter
notmuch tag -inbox +lists/haskell-weekly -- folder:amin/lists/haskell-weekly
notmuch tag -inbox +pay -- folder:amin/pay
# </aminb>
# <uw>
notmuch tag -inbox +uw/cs136 -- folder:uwaterloo/lists/cs136
notmuch tag -inbox +uw/se463 -- folder:uwaterloo/lists/se463
notmuch tag -inbox +lists/clvsingle -- folder:uwaterloo/lists/Clvsingle
notmuch tag -inbox +lists/gsa -- folder:uwaterloo/lists/GSA
notmuch tag -inbox +lists/math-grad -- folder:uwaterloo/lists/Math-grad
notmuch tag -inbox +lists/scs-grads -- folder:uwaterloo/lists/scs-grads
notmuch tag -inbox +lists/watform-students -- folder:uwaterloo/lists/Watform-students
# </uw>
# <gnu>
notmuch tag -inbox +lists/emacs-devel -- folder:gnu/l/emacs-devel
notmuch tag -inbox +lists/emacs-orgmode -- folder:gnu/l/emacs-orgmode
notmuch tag -inbox +lists/emacsconf-discuss -- folder:gnu/l/emacsconf-discuss
notmuch tag -inbox +lists/fencepost-users -- folder:gnu/l/fencepost-users
notmuch tag -inbox +lists/guix-devel -- folder:gnu/l/guix-devel
notmuch tag -inbox +lists/guile-devel -- folder:gnu/l/guile-devel
notmuch tag -inbox +lists/help-gnu-emacs -- folder:gnu/l/help-gnu-emacs
notmuch tag -inbox +lists/info-gnu-emacs -- folder:gnu/l/info-gnu-emacs
notmuch tag -inbox +lists/www-commits -- folder:gnu/l/www-commits
notmuch tag -inbox +lists/www-discuss -- folder:gnu/l/www-discuss
notmuch tag -inbox +webmasters -- folder:gnu/webmasters
notmuch tag -inbox +lists/deepspec -- folder:gnu/l/deepspec
notmuch tag -inbox +lists/haskell-cafe -- folder:gnu/l/haskell-cafe
notmuch tag -inbox +lists/haskell-art -- folder:gnu/l/haskell-art
notmuch tag -inbox +lists/notmuch -- folder:gnu/l/notmuch
# </gnu>
notmuch tag -inbox -unread +archive/notmuch -- path:archive/notmuch/**
notmuch tag -inbox -unread +archive/emacs-devel -- path:archive/emacs-devel/**[Unit]
Description=notmuch service
[Service]
Type=oneshot
ExecStart=/usr/bin/notmuch new
StandardOutput=syslog
StandardError=syslog
:header-args+: :tangle ~/.config/systemd/user/notmuch.timer
[Unit]
Description=notmuch timer
[Timer]
OnCalendar=*:0/5
Persistent=true
Unit=notmuch.service
[Install]
WantedBy=timers.target
:header-args+: :tangle ~/.offlineimaprc
[general]
pythonfile = ~/.offlineimap.py
accounts = Gmail, aminb
maxsyncaccounts = 3
[Account Gmail]
localrepository = GmailL
remoterepository = GmailR
[Account aminb]
localrepository = aminbL
remoterepository = aminbR
[Repository GmailL]
type = Maildir
localfolders = ~/Maildir/Gmail
[Repository GmailR]
type = IMAP
remotehost = imap.gmail.com
remoteusereval = mailuser("gmail")
remotepasseval = mailpasswd("gmail")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
ssl = yes
folderfilter = lambda foldername: foldername not in '[Gmail]/All Mail'
maxconnections = 1
realdelete = no
[Repository aminbL]
type = Maildir
localfolders = ~/Maildir/aminb
[Repository aminbR]
type = IMAP
remotehost = mail.aminb.org
remoteusereval = mailuser("aminb")
remotepasseval = mailpasswd("aminb")
sslcacertfile = /etc/ssl/certs/ca-certificates.crt
ssl = yes
folderfilter = lambda foldername: foldername not in 'dovecot.sieve'
maxconnections = 1
realdelete = no
:header-args+: :tangle ~/.offlineimap.py
import os
import subprocess
def mailpasswd(acct):
acct = os.path.basename(acct)
path = "/home/amin/.passwd/%s.gpg" % acct
args = ["gpg", "--use-agent", "--quiet", "--batch", "-d", path]
try:
return subprocess.check_output(args).strip()
except subprocess.CalledProcessError:
return ""
def mailuser(acct):
acct = os.path.basename(acct)
path = "/home/amin/.passwd/%s" % acct
args = ["cat", path]
try:
return subprocess.check_output(args).strip()
except subprocess.CalledProcessError:
return ""
def prime_gpg_agent():
ret = False
i = 1
while not ret:
ret = (mailpasswd("prime") == "prime")
if i > 2:
from offlineimap.ui import getglobalui
sys.stderr.write("Error reading in passwords. Terminating.\n")
getglobalui().terminate()
i += 1
return ret
prime_gpg_agent()require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags", "include" ];
if anyof (
address :is "from" "[email protected]",
address :is "from" "[email protected]") {
fileinto :create "webmasters";
stop;
}
include :personal "lists";
:header-args+: :tangle ~/sieve/lists.sieve :comments none
require [ "regex", "variables", "fileinto", "envelope", "mailbox", "imap4flags",
"include" ];
if anyof (
header :contains "list-id" "<emacs-devel.gnu.org>",
header :contains "list-id" "<emacs-orgmode.gnu.org>",
header :contains "list-id" "<emacsconf-discuss.gnu.org>",
header :contains "list-id" "<fencepost-users.gnu.org>",
header :contains "list-id" "<guix-devel.gnu.org>",
header :contains "list-id" "<guile-devel.gnu.org>",
header :contains "list-id" "<help-gnu-emacs.gnu.org>",
header :contains "list-id" "<info-gnu-emacs.gnu.org>",
header :contains "list-id" "<www-commits.gnu.org>",
header :contains "list-id" "<www-discuss.gnu.org>",
header :contains "list-id" "<deepspec.lists.cs.princeton.edu>",
header :contains "list-id" "<haskell-cafe.haskell.org>",
header :contains "list-id" "<haskell-art.we.lurk.org>",
header :contains "list-id" "<notmuch.notmuchmail.org>") {
if header :regex "list-id" "<([a-z_0-9-]+)[.@]" {
set :lower "listname" "${1}";
fileinto :create "l/${listname}";
}
}
:header-args+: :tangle ~/.config/polybar/config
;=====================================================
;
; To learn more about how to configure Polybar
; go to https://github.com/jaagr/polybar
;
; The README contains alot of information
;
;=====================================================
[colors]
;background = ${xrdb:color0:#222}
background = #222
background-alt = #444
;foreground = ${xrdb:color7:#222}
foreground = #eee
foreground-alt = #888
primary = #ffb52a
secondary = #e60053
alert = #bd2c40
[bar/main]
;monitor = ${env:MONITOR:HDMI-1}
width = 100%
height = 27
;offset-x = 1%
;offset-y = 1%
radius = 3.0
fixed-center = true
background = ${colors.background}
foreground = ${colors.foreground}
line-size = 3
line-color = #f00
border-size = 4
border-color = #00000000
padding-left = 0
padding-right = 2
module-margin-left = 2
module-margin-right = 2
font-0 = Ubuntu:fontformat=truetype:antialias=true:pixelsize=9;1
font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
font-2 = Wuncon Siji:pixelsize=10;1
font-3 = FontAwesome:pixelsize=10;1
modules-left = bspwm xwindow
modules-center =
modules-right = volume filesystem mail xkeyboard memory cpu temperature date powermenu
tray-position = right
tray-padding = 1
;tray-transparent = true
;tray-background = #0063ff
tray-maxsize = 18
wm-restack = bspwm
;override-redirect = true
scroll-up = bspwm-desknext
scroll-down = bspwm-deskprev
[module/xwindow]
type = internal/xwindow
label = %title:0:50:...%
[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-prefix-underline = ${colors.secondary}
label-layout = %layout%
label-layout-underline = ${colors.secondary}
label-indicator-padding = 2
label-indicator-margin = 1
label-indicator-background = ${colors.secondary}
label-indicator-underline = ${colors.secondary}
[module/filesystem]
type = internal/fs
interval = 25
mount-0 = /
label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
label-unmounted = %mountpoint% not mounted
label-unmounted-foreground = ${colors.foreground-alt}
[module/bspwm]
type = internal/bspwm
label-focused = %index%
label-focused-background = ${colors.background-alt}
label-focused-underline= ${colors.primary}
label-focused-padding = 2
label-occupied = %index%
label-occupied-padding = 2
label-urgent = %index%!
label-urgent-background = ${colors.alert}
label-urgent-padding = 2
label-empty = %index%
label-empty-foreground = ${colors.foreground-alt}
label-empty-padding = 2
[module/i3]
type = internal/i3
format = <label-state> <label-mode>
index-sort = true
wrapping-scroll = false
; Only show workspaces on the same output as the bar
;pin-workspaces = true
label-mode-padding = 2
label-mode-foreground = #000
label-mode-background = ${colors.primary}
; focused = Active workspace on focused monitor
label-focused = %index%
label-focused-background = ${module/bspwm.label-focused-background}
label-focused-underline = ${module/bspwm.label-focused-underline}
label-focused-padding = ${module/bspwm.label-focused-padding}
; unfocused = Inactive workspace on any monitor
label-unfocused = %index%
label-unfocused-padding = ${module/bspwm.label-occupied-padding}
; visible = Active workspace on unfocused monitor
label-visible = %index%
label-visible-background = ${self.label-focused-background}
label-visible-underline = ${self.label-focused-underline}
label-visible-padding = ${self.label-focused-padding}
; urgent = Workspace with urgency hint set
label-urgent = %index%
label-urgent-background = ${module/bspwm.label-urgent-background}
label-urgent-padding = ${module/bspwm.label-urgent-padding}
[module/mpd]
type = internal/mpd
format-online = <label-song> <icon-prev> <icon-stop> <toggle> <icon-next>
icon-prev =
icon-stop =
icon-play =
icon-pause =
icon-next =
label-song-maxlen = 25
label-song-ellipsis = true
[module/xbacklight]
type = internal/xbacklight
format = <label> <bar>
label = BL
bar-width = 10
bar-indicator = |
bar-indicator-foreground = #ff
bar-indicator-font = 2
bar-fill = ─
bar-fill-font = 2
bar-fill-foreground = #9f78e1
bar-empty = ─
bar-empty-font = 2
bar-empty-foreground = ${colors.foreground-alt}
[module/backlight-acpi]
inherit = module/xbacklight
type = internal/backlight
;card = intel_backlight
card = mba6x_backlight
[module/cpu]
type = internal/cpu
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #f90000
label = %percentage%%
[module/memory]
type = internal/memory
interval = 2
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #4bffdc
label = %percentage_used%%
[module/wlan]
type = internal/network
interface =
interval = 3.0
format-connected = <ramp-signal> <label-connected>
format-connected-underline = #9f78e1
label-connected = %essid%
format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}
ramp-signal-0 =
ramp-signal-1 =
ramp-signal-2 =
ramp-signal-3 =
ramp-signal-4 =
ramp-signal-foreground = ${colors.foreground-alt}
[module/eth]
type = internal/network
interface =
interval = 3.0
format-connected-underline = #55aa55
format-connected-prefix = " "
format-connected-prefix-foreground = ${colors.foreground-alt}
label-connected = %local_ip%
format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}
[module/date]
type = internal/date
interval = 5
date =
date-alt = " %Y-%m-%d"
time = %H:%M
time-alt = %H:%M:%S
format-prefix =
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #0a6cf5
label = %date% %time%
[module/volume]
type = internal/volume
format-volume = <label-volume> <bar-volume>
label-volume = vol
label-volume-foreground = ${root.foreground}
format-muted-prefix = " "
format-muted-foreground = ${colors.foreground-alt}
label-muted = mute
bar-volume-width = 10
bar-volume-foreground-0 = #55aa55
bar-volume-foreground-1 = #55aa55
bar-volume-foreground-2 = #55aa55
bar-volume-foreground-3 = #55aa55
bar-volume-foreground-4 = #55aa55
bar-volume-foreground-5 = #f5a70a
bar-volume-foreground-6 = #ff5555
bar-volume-gradient = false
bar-volume-indicator = |
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${colors.foreground-alt}
[module/battery]
type = internal/battery
battery = BAT0
adapter = ADP1
full-at = 64
format-charging = <animation-charging> <label-charging>
format-charging-underline = #ffb52a
format-discharging = <ramp-capacity> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}
format-full-prefix = " "
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = ${self.format-charging-underline}
ramp-capacity-0 =
ramp-capacity-1 =
ramp-capacity-2 =
ramp-capacity-foreground = ${colors.foreground-alt}
animation-charging-0 =
animation-charging-1 =
animation-charging-2 =
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750
[module/temperature]
type = internal/temperature
thermal-zone = 1
warn-temperature = 66
format = <ramp> <label>
format-underline = #f50a4d
format-warn = <ramp> <label-warn>
format-warn-underline = ${self.format-underline}
label = %temperature%
label-warn = %temperature%
label-warn-foreground = ${colors.secondary}
ramp-0 =
ramp-1 =
ramp-2 =
ramp-foreground = ${colors.foreground-alt}
[module/powermenu]
type = custom/menu
format-spacing = 1
label-open =
label-open-foreground = ${colors.secondary}
label-close = cancel
label-close-foreground = ${colors.secondary}
label-separator = |
label-separator-foreground = ${colors.foreground-alt}
menu-0-0 = reboot
menu-0-0-exec = menu-open-1
menu-0-1 = power off
menu-0-1-exec = menu-open-2
menu-1-0 = cancel
menu-1-0-exec = menu-open-0
menu-1-1 = reboot
menu-1-1-exec = sudo reboot
menu-2-0 = power off
menu-2-0-exec = sudo poweroff
menu-2-1 = cancel
menu-2-1-exec = menu-open-0
[module/mail]
type = custom/script
interval = 60
format = <label>
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-underline = #0a6cf5
exec = notmuch count tag:unread
[settings]
screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
[global/wm]
margin-top = 0
margin-bottom = 0
; vim:ft=dosini
:header-args+: :tangle ~/.local/bin/polybar-launch :shebang “#!/usr/bin/env sh”
# Terminate already running bar instances
killall -q polybar
# Wait until the processes have been shut down
while pgrep -x polybar >/dev/null; do sleep 1; done
# Launch main bar
polybar main &
echo "Bars launched..."[Unit]
Description=Powertop tunings
[Service]
ExecStart=/usr/bin/powertop --auto-tune
RemainAfterExit=true
[Install]
WantedBy=multi-user.target
:header-args+: :tangle ~/.config/ranger/rc.conf
# ===================================================================
# This file contains the default startup commands for ranger.
# To change them, it is recommended to create the file
# ~/.config/ranger/rc.conf and add your custom commands there.
#
# If you copy this whole file there, you may want to set the environment
# variable RANGER_LOAD_DEFAULT_RC to FALSE to avoid loading it twice.
#
# The purpose of this file is mainly to define keybindings and settings.
# For running more complex python code, please create a plugin in "plugins/" or
# a command in "commands.py".
#
# Each line is a command that will be run before the user interface
# is initialized. As a result, you can not use commands which rely
# on the UI such as :delete or :mark.
# ===================================================================
# ===================================================================
# == Options
# ===================================================================
# How many columns are there, and what are their relative widths?
set column_ratios 1,3,4
# Which files should be hidden? (regular expression)
set hidden_filter ^\.|\.(?:pyc|pyo|bak|swp)$|^lost\+found$|^__(py)?cache__$
# Show hidden files? You can toggle this by typing 'zh'
set show_hidden false
# Ask for a confirmation when running the "delete" command?
# Valid values are "always" (default), "never", "multiple"
# With "multiple", ranger will ask only if you delete multiple files at once.
set confirm_on_delete multiple
# Which script is used to generate file previews?
# ranger ships with scope.sh, a script that calls external programs (see
# README for dependencies) to preview images, archives, etc.
set preview_script ~/.config/ranger/scope.sh
# Use the external preview script or display simple plain text previews?
set use_preview_script true
# Open all images in this directory when running certain image viewers
# like feh or sxiv? You can still open selected files by marking them.
set open_all_images true
# Be aware of version control systems and display information.
set vcs_aware false
# State of the three backends git, hg, bzr. The possible states are
# disabled, local (only show local info), enabled (show local and remote
# information).
set vcs_backend_git enabled
set vcs_backend_hg disabled
set vcs_backend_bzr disabled
# Preview images in full color with the external command "w3mimgpreview"?
# This requires the console web browser "w3m" and a supported terminal.
# It has been successfully tested with "xterm" and "urxvt" without tmux.
set preview_images true
# Use a unicode "..." character to mark cut-off filenames?
set unicode_ellipsis false
# Show dotfiles in the bookmark preview box?
set show_hidden_bookmarks true
# Which colorscheme to use? These colorschemes are available by default:
# default, jungle, snow
set colorscheme default
# Preview files on the rightmost column?
# And collapse (shrink) the last column if there is nothing to preview?
set preview_files true
set preview_directories true
set collapse_preview true
# Save the console history on exit?
set save_console_history true
# Draw the status bar on top of the browser window (default: bottom)
set status_bar_on_top false
# Draw a progress bar in the status bar which displays the average state of all
# currently running tasks which support progress bars?
set draw_progress_bar_in_status_bar true
# Draw borders around columns?
set draw_borders true
# Display the directory name in tabs?
set dirname_in_tabs false
# Enable the mouse support?
set mouse_enabled true
# Display the file size in the main column or status bar?
set display_size_in_main_column true
set display_size_in_status_bar true
# Display files tags in all columns or only in main column?
set display_tags_in_all_columns true
# Set a title for the window?
set update_title false
# Set the title to "ranger" in the tmux program?
set update_tmux_title false
# Shorten the title if it gets long? The number defines how many
# directories are displayed at once, 0 turns off this feature.
set shorten_title 3
# Abbreviate $HOME with ~ in the titlebar (first line) of ranger?
set tilde_in_titlebar false
# How many directory-changes or console-commands should be kept in history?
set max_history_size 20
set max_console_history_size 50
# Try to keep so much space between the top/bottom border when scrolling:
set scroll_offset 8
# Flush the input after each key hit? (Noticable when ranger lags)
set flushinput true
# Padding on the right when there's no preview?
# This allows you to click into the space to run the file.
set padding_right true
# Save bookmarks (used with mX and `X) instantly?
# This helps to synchronize bookmarks between multiple ranger
# instances but leads to *slight* performance loss.
# When false, bookmarks are saved when ranger is exited.
set autosave_bookmarks true
# You can display the "real" cumulative size of directories by using the
# command :get_cumulative_size or typing "dc". The size is expensive to
# calculate and will not be updated automatically. You can choose
# to update it automatically though by turning on this option:
set autoupdate_cumulative_size false
# Turning this on makes sense for screen readers:
set show_cursor false
# One of: size, basename, mtime, type
set sort natural
# Additional sorting options
set sort_reverse false
set sort_case_insensitive true
set sort_directories_first true
# Enable this if key combinations with the Alt Key don't work for you.
# (Especially on xterm)
set xterm_alt_key false
# ===================================================================
# == Local Options
# ===================================================================
# You can set local options that only affect a single directory.
# Examples:
# setlocal path=~/downloads sort mtime
# ===================================================================
# == Command Aliases in the Console
# ===================================================================
alias e edit
alias q quit
alias q! quitall
alias qall quitall
alias setl setlocal
alias filter scout -prt
alias find scout -aet
alias mark scout -mr
alias unmark scout -Mr
alias search scout -rs
alias search_inc scout -rts
alias travel scout -aefiklst
# ===================================================================
# == Define keys for the browser
# ===================================================================
# Basic
map Q quit!
map q quit
copymap q ZZ ZQ
map R reload_cwd
map <C-r> reset
map <C-l> redraw_window
map <C-c> abort
map <esc> change_mode normal
map i display_file
map ? help
map W display_log
map w taskview_open
map S shell $SHELL
map : console
map ; console
map ! console shell
map @ console -p6 shell %%s
map # console shell -p
map s console shell
map r chain draw_possible_programs; console open_with
map f console find
map cd console cd
# Tagging / Marking
map t tag_toggle
map ut tag_remove
map "<any> tag_toggle tag=%any
map <Space> mark_files toggle=True
map v mark_files all=True toggle=True
map uv mark_files all=True val=False
map V toggle_visual_mode
map uV toggle_visual_mode reverse=True
# For the nostalgics: Midnight Commander bindings
map <F1> help
map <F3> display_file
map <F4> edit
map <F5> copy
map <F6> cut
map <F7> console mkdir
map <F8> console delete
map <F10> exit
# In case you work on a keyboard with dvorak layout
map <UP> move up=1
map <DOWN> move down=1
map <LEFT> move left=1
map <RIGHT> move right=1
map <HOME> move to=0
map <END> move to=-1
map <PAGEDOWN> move down=1 pages=True
map <PAGEUP> move up=1 pages=True
map <CR> move right=1
map <DELETE> console delete
map <INSERT> console touch
# VIM-like
copymap <UP> k
copymap <DOWN> j
copymap <LEFT> h
copymap <RIGHT> l
copymap <HOME> gg
copymap <END> G
copymap <PAGEDOWN> <C-F>
copymap <PAGEUP> <C-B>
map J move down=0.5 pages=True
map K move up=0.5 pages=True
copymap J <C-D>
copymap K <C-U>
# Jumping around
map H history_go -1
map L history_go 1
map ] move_parent 1
map [ move_parent -1
map } traverse
map gh cd ~
map ge cd /etc
map gu cd /usr
map gd cd /dev
map gl cd -r .
map gL cd -r %f
map go cd /opt
map gv cd /var
map gm cd /media
map gM cd /mnt
map gs cd /srv
map gr cd /
map gR eval fm.cd(ranger.RANGERDIR)
map g/ cd /
map g? cd /usr/share/doc/ranger
# External Programs
map E edit
map du shell -p du --max-depth=1 -h --apparent-size
map dU shell -p du --max-depth=1 -h --apparent-size | sort -rh
map yp shell -d echo -n %d/%f | xsel -i
map yd shell -d echo -n %d | xsel -i
map yn shell -d echo -n %f | xsel -i
# Filesystem Operations
map = chmod
map cw console rename
map A eval fm.open_console('rename ' + fm.thisfile.basename)
map I eval fm.open_console('rename ' + fm.thisfile.basename, position=7)
map pp paste
map po paste overwrite=True
map pl paste_symlink relative=False
map pL paste_symlink relative=True
map phl paste_hardlink
map pht paste_hardlinked_subtree
map dd cut
map ud uncut
map da cut mode=add
map dr cut mode=remove
map yy copy
map uy uncut
map ya copy mode=add
map yr copy mode=remove
# Temporary workarounds
map dgg eval fm.cut(dirarg=dict(to=0), narg=quantifier)
map dG eval fm.cut(dirarg=dict(to=-1), narg=quantifier)
map dj eval fm.cut(dirarg=dict(down=1), narg=quantifier)
map dk eval fm.cut(dirarg=dict(up=1), narg=quantifier)
map ygg eval fm.copy(dirarg=dict(to=0), narg=quantifier)
map yG eval fm.copy(dirarg=dict(to=-1), narg=quantifier)
map yj eval fm.copy(dirarg=dict(down=1), narg=quantifier)
map yk eval fm.copy(dirarg=dict(up=1), narg=quantifier)
# Searching
map / console search
map n search_next
map N search_next forward=False
map ct search_next order=tag
map cs search_next order=size
map ci search_next order=mimetype
map cc search_next order=ctime
map cm search_next order=mtime
map ca search_next order=atime
# Tabs
map <C-n> tab_new ~
map <C-w> tab_close
map <TAB> tab_move 1
map <S-TAB> tab_move -1
map <A-Right> tab_move 1
map <A-Left> tab_move -1
map gt tab_move 1
map gT tab_move -1
map gn tab_new ~
map gc tab_close
map uq tab_restore
map <a-1> tab_open 1
map <a-2> tab_open 2
map <a-3> tab_open 3
map <a-4> tab_open 4
map <a-5> tab_open 5
map <a-6> tab_open 6
map <a-7> tab_open 7
map <a-8> tab_open 8
map <a-9> tab_open 9
# Sorting
map or toggle_option sort_reverse
map os chain set sort=size; set sort_reverse=False
map ob chain set sort=basename; set sort_reverse=False
map on chain set sort=natural; set sort_reverse=False
map om chain set sort=mtime; set sort_reverse=False
map oc chain set sort=ctime; set sort_reverse=False
map oa chain set sort=atime; set sort_reverse=False
map ot chain set sort=type; set sort_reverse=False
map oS chain set sort=size; set sort_reverse=True
map oB chain set sort=basename; set sort_reverse=True
map oN chain set sort=natural; set sort_reverse=True
map oM chain set sort=mtime; set sort_reverse=True
map oC chain set sort=ctime; set sort_reverse=True
map oA chain set sort=atime; set sort_reverse=True
map oT chain set sort=type; set sort_reverse=True
map dc get_cumulative_size
# Settings
map zc toggle_option collapse_preview
map zd toggle_option sort_directories_first
map zh toggle_option show_hidden
map <C-h> toggle_option show_hidden
map zi toggle_option flushinput
map zm toggle_option mouse_enabled
map zp toggle_option preview_files
map zP toggle_option preview_directories
map zs toggle_option sort_case_insensitive
map zu toggle_option autoupdate_cumulative_size
map zv toggle_option use_preview_script
map zf console filter
# Bookmarks
map `<any> enter_bookmark %any
map '<any> enter_bookmark %any
map m<any> set_bookmark %any
map um<any> unset_bookmark %any
map m<bg> draw_bookmarks
copymap m<bg> um<bg> `<bg> '<bg>
# Generate all the chmod bindings with some python help:
eval for arg in "rwxXst": cmd("map +u{0} shell -d chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +g{0} shell -d chmod g+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +o{0} shell -d chmod o+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +a{0} shell -d chmod a+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map +{0} shell -d chmod u+{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -u{0} shell -d chmod u-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -g{0} shell -d chmod g-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -o{0} shell -d chmod o-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -a{0} shell -d chmod a-{0} %s".format(arg))
eval for arg in "rwxXst": cmd("map -{0} shell -d chmod u-{0} %s".format(arg))
# ===================================================================
# == Define keys for the console
# ===================================================================
# Note: Unmapped keys are passed directly to the console.
# Basic
cmap <tab> eval fm.ui.console.tab()
cmap <s-tab> eval fm.ui.console.tab(-1)
cmap <ESC> eval fm.ui.console.close()
cmap <CR> eval fm.ui.console.execute()
cmap <C-l> redraw_window
copycmap <ESC> <C-c>
copycmap <CR> <C-j>
# Move around
cmap <up> eval fm.ui.console.history_move(-1)
cmap <down> eval fm.ui.console.history_move(1)
cmap <left> eval fm.ui.console.move(left=1)
cmap <right> eval fm.ui.console.move(right=1)
cmap <home> eval fm.ui.console.move(right=0, absolute=True)
cmap <end> eval fm.ui.console.move(right=-1, absolute=True)
# Line Editing
cmap <backspace> eval fm.ui.console.delete(-1)
cmap <delete> eval fm.ui.console.delete(0)
cmap <C-w> eval fm.ui.console.delete_word()
cmap <C-k> eval fm.ui.console.delete_rest(1)
cmap <C-u> eval fm.ui.console.delete_rest(-1)
cmap <C-y> eval fm.ui.console.paste()
# And of course the emacs way
copycmap <up> <C-p>
copycmap <down> <C-n>
copycmap <left> <C-b>
copycmap <right> <C-f>
copycmap <home> <C-a>
copycmap <end> <C-e>
copycmap <delete> <C-d>
copycmap <backspace> <C-h>
# Note: There are multiple ways to express backspaces. <backspace> (code 263)
# and <backspace2> (code 127). To be sure, use both.
copycmap <backspace> <backspace2>
# This special expression allows typing in numerals:
cmap <allow_quantifiers> false
# ===================================================================
# == Pager Keybindings
# ===================================================================
# Movement
pmap <down> pager_move down=1
pmap <up> pager_move up=1
pmap <left> pager_move left=4
pmap <right> pager_move right=4
pmap <home> pager_move to=0
pmap <end> pager_move to=-1
pmap <pagedown> pager_move down=1.0 pages=True
pmap <pageup> pager_move up=1.0 pages=True
pmap <C-d> pager_move down=0.5 pages=True
pmap <C-u> pager_move up=0.5 pages=True
copypmap <UP> k <C-p>
copypmap <DOWN> j <C-n> <CR>
copypmap <LEFT> h
copypmap <RIGHT> l
copypmap <HOME> g
copypmap <END> G
copypmap <C-d> d
copypmap <C-u> u
copypmap <PAGEDOWN> n f <C-F> <Space>
copypmap <PAGEUP> p b <C-B>
# Basic
pmap <ESC> pager_close
copypmap <ESC> q Q i <F3>
pmap E edit_file
# ===================================================================
# == Taskview Keybindings
# ===================================================================
# Movement
tmap <up> taskview_move up=1
tmap <down> taskview_move down=1
tmap <home> taskview_move to=0
tmap <end> taskview_move to=-1
tmap <pagedown> taskview_move down=1.0 pages=True
tmap <pageup> taskview_move up=1.0 pages=True
tmap <C-d> taskview_move down=0.5 pages=True
tmap <C-u> taskview_move up=0.5 pages=True
copytmap <UP> k <C-p>
copytmap <DOWN> j <C-n> <CR>
copytmap <HOME> g
copytmap <END> G
copytmap <C-u> u
copytmap <PAGEDOWN> n f <C-F> <Space>
copytmap <PAGEUP> p b <C-B>
# Changing priority and deleting tasks
tmap J eval -q fm.ui.taskview.task_move(-1)
tmap K eval -q fm.ui.taskview.task_move(0)
tmap dd eval -q fm.ui.taskview.task_remove()
tmap <pagedown> eval -q fm.ui.taskview.task_move(-1)
tmap <pageup> eval -q fm.ui.taskview.task_move(0)
tmap <delete> eval -q fm.ui.taskview.task_remove()
# Basic
tmap <ESC> taskview_close
copytmap <ESC> q Q w <C-c>
:header-args+: :tangle ~/.config/ranger/scope.sh :shebang “#!/usr/bin/env sh”
# ranger supports enhanced previews. If the option "use_preview_script"
# is set to True and this file exists, this script will be called and its
# output is displayed in ranger. ANSI color codes are supported.
# NOTES: This script is considered a configuration file. If you upgrade
# ranger, it will be left untouched. (You must update it yourself.)
# Also, ranger disables STDIN here, so interactive scripts won't work properly
# Meanings of exit codes:
# code | meaning | action of ranger
# -----+------------+-------------------------------------------
# 0 | success | success. display stdout as preview
# 1 | no preview | failure. display no preview at all
# 2 | plain text | display the plain content of the file
# 3 | fix width | success. Don't reload when width changes
# 4 | fix height | success. Don't reload when height changes
# 5 | fix both | success. Don't ever reload
# Meaningful aliases for arguments:
path="$1" # Full path of the selected file
width="$2" # Width of the preview pane (number of fitting characters)
height="$3" # Height of the preview pane (number of fitting characters)
maxln=200 # Stop after $maxln lines. Can be used like ls | head -n $maxln
# Find out something about the file:
mimetype=$(file --mime-type -Lb "$path")
extension=${path##*.}
# Functions:
# runs a command and saves its output into $output. Useful if you need
# the return value AND want to use the output in a pipe
try() { output=$(eval '"$@"'); }
# writes the output of the previouosly used "try" command
dump() { echo "$output"; }
# a common post-processing function used after most commands
trim() { head -n "$maxln"; }
# wraps highlight to treat exit code 141 (killed by SIGPIPE) as success
highlight() { command highlight "$@"; test $? = 0 -o $? = 141; }
case "$extension" in
# Archive extensions:
7z|a|ace|alz|arc|arj|bz|bz2|cab|cpio|deb|gz|jar|lha|lz|lzh|lzma|lzo|\
rpm|rz|t7z|tar|tbz|tbz2|tgz|tlz|txz|tZ|tzo|war|xpi|xz|Z|zip)
try als "$path" && { dump | trim; exit 0; }
try acat "$path" && { dump | trim; exit 3; }
try bsdtar -lf "$path" && { dump | trim; exit 0; }
exit 1;;
rar)
try unrar -p- lt "$path" && { dump | trim; exit 0; } || exit 1;;
# PDF documents:
pdf)
try pdftotext -l 10 -nopgbrk -q "$path" - && \
{ dump | trim | fmt -s -w $width; exit 0; } || exit 1;;
# BitTorrent Files
torrent)
try transmission-show "$path" && { dump | trim; exit 5; } || exit 1;;
# HTML Pages:
htm|html|xhtml)
try w3m -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
try lynx -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
try elinks -dump "$path" && { dump | trim | fmt -s -w $width; exit 4; }
;; # fall back to highlight/cat if the text browsers fail
esac
case "$mimetype" in
# Syntax highlight for text files:
text/* | */xml)
try highlight --out-format=ansi "$path" && { dump | trim; exit 5; } || exit 2;;
# Ascii-previews of images:
image/*)
img2txt --gamma=0.6 --width="$width" "$path" && exit 4 || exit 1;;
# Display information about media files:
video/* | audio/*)
exiftool "$path" && exit 5
# Use sed to remove spaces so the output fits into the narrow window
try mediainfo "$path" && { dump | trim | sed 's/ \+:/: /;'; exit 5; } || exit 1;;
esac
exit 1; Global settings for redshift
[redshift]
; Set the day and night screen temperatures (Neutral is 6500K)
;temp-day=5700
;temp-night=3500
;temp-day=6500
temp-day=6200
;temp-night=4800
;temp-night=5000
;temp-night=4500
temp-night=4000
; Enable/Disable a smooth transition between day and night
; 0 will cause a direct change from day to night screen temperature.
; 1 will gradually increase or decrease the screen temperature.
transition=1
; Set the screen brightness. Default is 1.0.
;brightness=0.9
; It is also possible to use different settings for day and night
; since version 1.8.
;brightness-day=0.7
;brightness-night=0.4
; Set the screen gamma (for all colors, or each color channel
; individually)
;gamma=0.8
;gamma=1.0
;gamma=0.8:0.7:0.8
; This can also be set individually for day and night since
; version 1.10.
;gamma-day=0.8:0.7:0.8
;gamma-night=0.6
; Set the location-provider: 'geoclue2' or 'manual'
; type 'redshift -l list' to see possible values.
; The location provider settings are in a different section.
;location-provider=manual
location-provider=geoclue2
; Set the adjustment-method: 'randr', 'vidmode'
; type 'redshift -m list' to see all possible values.
; 'randr' is the preferred method, 'vidmode' is an older API.
; but works in some cases when 'randr' does not.
; The adjustment method settings are in a different section.
adjustment-method=randr
; Configuration of the location-provider:
; type 'redshift -l PROVIDER:help' to see the settings.
; ex: 'redshift -l manual:help'
; Keep in mind that longitudes west of Greenwich (e.g. the Americas)
; are negative numbers.
;[manual]
;lat=48.1
;lon=11.6
; Configuration of the adjustment-method
; type 'redshift -m METHOD:help' to see the settings.
; ex: 'redshift -m randr:help'
; In this example, randr is configured to adjust screen 1.
; Note that the numbering starts from 0, so this is actually the
; second screen. If this option is not specified, Redshift will try
; to adjust _all_ screens.
;[randr]
;screen=1
:header-args+: :tangle ~/.config/rofi/config
rofi.font: Ubuntu Mono 13
! rofi.font: Inconsolata 16
! rofi.font: Iosevka 13
! rofi.font: Source Code Pro 11
rofi.modi: run,window
! rofi.width: 640
rofi.width: 600
!rofi.location: 2
!rofi.yoffset: 200
rofi.monitor: -1
!rofi.lines: 10
!rofi.theme: /usr/share/rofi/themes//Arc.rasi
!rofi.theme: /usr/share/rofi/themes//Paper.rasi
!rofi.theme: /usr/share/rofi/themes//sidebar.rasi
rofi.theme: /usr/share/rofi/themes//gruvbox-light.rasi
:header-args+: :tangle ~/.config/rofi-pass/config
# permanently set alternative root dir
# root=/path/to/root
# rofi command. Make sure to have "$@" as last argument
_rofi () {
#rofi -no-auto-select -kb-accept-entry "!Return" -i -no-levenshtein-sort "$@"
rofi -i -no-auto-select -kb-accept-entry "!Return" "$@"
}
# xdotool needs the keyboard layout to be set using setxkbmap
# You can do this in your autostart scripts (e.g. xinitrc)
# If for some reason, you cannot do this, you can set the command here.
# and set fix_layout to true
fix_layout=false
layout_cmd () {
setxkbmap us
}
# fields to be used
URL_field='url'
USERNAME_field='user'
AUTOTYPE_field='autotype'
# delay to be used for :delay keyword
delay=2
## Programs to be used
# Editor
EDITOR='gvim -f'
# Browser
BROWSER='chromium'
## Misc settings
default_do='menu' # menu, autotype, copyPass, typeUser, typePass, copyUser, copyUrl, viewEntry, typeMenu, actionMenu, copyMenu, openUrl
auto_enter='false'
notify='false'
default_autotype='user :tab pass'
# color of the help messages
# leave empty for autodetection
help_color="#4872FF"
# Clipboard settings
# Possible options: primary, clipboard, both
clip=primary
# Options for generating new password entries
# default_user is also used for password files that have no user field.
default_user=aminb
default_user2=aminban
password_length=30
# Custom Keybindings
#autotype="Alt+1"
autotype="Alt+m"
type_user="Alt+2"
type_pass="Alt+3"
open_url="Alt+4"
copy_name="Alt+u"
copy_url="Alt+l"
copy_pass="Alt+p"
show="Alt+o"
copy_entry="Alt+2"
type_entry="Alt+1"
copy_menu="Alt+c"
action_menu="Alt+a"
type_menu="Alt+t"
help="Alt+h"
switch="Alt+x"
insert_pass="Alt+n"
:header-args+: :tangle ~/.config/sway/config
exec xrdb .Xresources
exec dunst
### Variables
# super
set $mod Mod4
# alt
set $mod2 Mod1
set $left h
set $down j
set $up k
set $right l
set $term urxvt
set $menu rofi -show run -display-run '> ' -display-window ' 🗔 '
### Output configuration
#
# Default wallpaper (more resolutions are available in __DATADIR__/backgrounds/sway/)
output * bg /usr/share/backgrounds/sway/Sway_Wallpaper_Blue_1920x1080.png fill
#
# Example configuration:
#
# output HDMI-A-1 resolution 1920x1080 position 1920,0
#
# You can get the names of your outputs by running: swaymsg -t get_outputs
### Idle configuration
#
# Example configuration:
#
#exec swayidle \
# timeout 300 'swaylock -c 000000' \
# timeout 600 'swaymsg "output * dpms off"' \
# resume 'swaymsg "output * dpms on"' \
# before-sleep 'swaylock -c 000000'
#
# This will lock your screen after 300 seconds of inactivity, then turn off
# your displays after another 600 seconds, and turn your screens back on when
# resumed. It will also lock your screen before your computer goes to sleep.
### Input configuration
input "1739:31251:DLL07BE:01_06CB:7A13_Touchpad" {
dwt enabled
tap enabled
natural_scroll enabled
middle_emulation enabled
click_method clickfinger
}
input "1:1:AT_Translated_Set_2_keyboard" {
repeat_delay 200
repeat_rate 45
xkb_layout us,ir
xkb_options ctrl:nocaps,altwin:swap_alt_win,ctrl:rctrl_ralt,grp:shifts_toggle
}
### Key bindings
#
# Basics:
#
# start a terminal
bindsym $mod+Return exec $term
# kill focused window
bindsym $mod+Shift+q kill
# start your launcher
bindsym $mod+d exec $menu
# Drag floating windows by holding down $mod and left mouse button.
# Resize them with right mouse button + $mod.
# Despite the name, also works for non-floating windows.
# Change normal to inverse to use left mouse button for resizing and right
# mouse button for dragging.
floating_modifier $mod normal
# reload the configuration file
bindsym $mod+Shift+c reload
# exit sway (logs you out of your wayland session)
bindsym $mod+Shift+e exit
bindsym $mod+apostrophe exec rofi-light # rofi-based brightness chooser
bindsym XF86MonBrightnessUp exec light -A 5 # increase screen brightness
bindsym XF86MonBrightnessDown exec light -U 5 # decrease screen brightness
bindsym XF86AudioRaiseVolume exec pamixer --allow-boost --increase 5
bindsym XF86AudioLowerVolume exec pamixer --allow-boost --decrease 5
bindsym XF86AudioMute exec pamixer --toggle-mute
bindsym XF86AudioMicMute exec pactl set-source-mute 1 toggle
# original sway workspace switch and window move
bindsym $mod+bracketleft workspace prev
bindsym $mod+bracketright workspace next
bindsym $mod+braceleft move container to workspace prev
bindsym $mod+braceright move container to workspace next
# bspwm-esque workspace switch and window move
bindsym $mod2+bracketleft exec sway-ws-util switch prev
bindsym $mod2+bracketright exec sway-ws-util switch next
bindsym $mod2+braceleft exec sway-ws-util move prev follow
bindsym $mod2+braceright exec sway-ws-util move next follow
#
# Moving around:
#
# Move your focus around
bindsym $mod+$left focus left
bindsym $mod+$down focus down
bindsym $mod+$up focus up
bindsym $mod+$right focus right
# or use $mod+[up|down|left|right]
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# _move_ the focused window with the same, but add Shift
bindsym $mod+Shift+$left move left
bindsym $mod+Shift+$down move down
bindsym $mod+Shift+$up move up
bindsym $mod+Shift+$right move right
# ditto, with arrow keys
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
#
# Workspaces:
#
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# Note: workspaces can have any name you want, not just numbers.
# We just use 1-10 as the default.
#
# Layout stuff:
#
# You can "split" the current object of your focus with
# $mod+b or $mod+v, for horizontal and vertical splits
# respectively.
bindsym $mod+b splith
bindsym $mod+v splitv
# Switch the current container between different layout styles
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# Make the current focus fullscreen
bindsym $mod+f fullscreen
# Toggle the current focus between tiling and floating mode
bindsym $mod+Shift+space floating toggle
# Swap focus between the tiling area and the floating area
bindsym $mod+space focus mode_toggle
# move focus to the parent container
bindsym $mod+a focus parent
#
# Scratchpad:
#
# Sway has a "scratchpad", which is a bag of holding for windows.
# You can send windows there and get them back later.
# Move the currently focused window to the scratchpad
bindsym $mod+Shift+minus move scratchpad
# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym $mod+minus scratchpad show
#
# Resizing containers:
#
mode "resize" {
# left will shrink the containers width
# right will grow the containers width
# up will shrink the containers height
# down will grow the containers height
bindsym $left resize shrink width 10px
bindsym $down resize grow height 10px
bindsym $up resize shrink height 10px
bindsym $right resize grow width 10px
# ditto, with arrow keys
bindsym Left resize shrink width 10px
bindsym Down resize grow height 10px
bindsym Up resize shrink height 10px
bindsym Right resize grow width 10px
# return to default mode
bindsym Return mode "default"
bindsym Escape mode "default"
}
bindsym $mod+Shift+r mode "resize"
#
# Status Bar:
#
# Read `man 5 sway-bar` for more information about this section.
bar {
position bottom
colors {
statusline #ffffff
background #323232
inactive_workspace #32323200 #32323200 #5c5c5c
}
status_command i3gs ~/.config/i3gs/config
}
include /etc/sway/config.d/*
# ------------------------------------------------------------------------------
# tlp - Parameters for power saving
# See full explanation: http://linrunner.de/en/tlp/docs/tlp-configuration.html
# Hint: some features are disabled by default, remove the leading # to enable
# them.
# Set to 0 to disable, 1 to enable TLP.
TLP_ENABLE=1
# Operation mode when no power supply can be detected: AC, BAT.
# Concerns some desktop and embedded hardware only.
TLP_DEFAULT_MODE=AC
# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
# Hint: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
TLP_PERSISTENT_DEFAULT=0
# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
# Non-zero value enables, zero disables laptop mode.
DISK_IDLE_SECS_ON_AC=0
DISK_IDLE_SECS_ON_BAT=2
# Dirty page values (timeouts in secs).
MAX_LOST_WORK_SECS_ON_AC=15
MAX_LOST_WORK_SECS_ON_BAT=60
# Hint: CPU parameters below are disabled by default, remove the leading #
# to enable them, otherwise kernel default values are used.
# Select a CPU frequency scaling governor.
# Intel Core i processor with intel_pstate driver:
# powersave(*), performance.
# Older hardware with acpi-cpufreq driver:
# ondemand(*), powersave, performance, conservative, schedutil.
# (*) is recommended.
# Hint: use tlp-stat -p to show the active driver and available governors.
# Important:
# powersave for intel_pstate and ondemand for acpi-cpufreq are power
# efficient for *almost all* workloads and therefore kernel and most
# distributions have chosen them as defaults. If you still want to change,
# you should know what you're doing! You *must* disable your distribution's
# governor settings or conflicts will occur.
#CPU_SCALING_GOVERNOR_ON_AC=powersave
#CPU_SCALING_GOVERNOR_ON_BAT=powersave
# Set the min/max frequency available for the scaling governor.
# Possible values strongly depend on your CPU. For available frequencies see
# the output of tlp-stat -p.
#CPU_SCALING_MIN_FREQ_ON_AC=0
#CPU_SCALING_MAX_FREQ_ON_AC=0
#CPU_SCALING_MIN_FREQ_ON_BAT=0
#CPU_SCALING_MAX_FREQ_ON_BAT=0
# Set energy performance hints (HWP) for Intel P-state governor:
# performance, balance_performance, default, balance_power, power
# Values are given in order of increasing power saving.
# Note: Intel Skylake or newer CPU and Kernel >= 4.10 required.
CPU_HWP_ON_AC=balance_performance
CPU_HWP_ON_BAT=balance_power
# Set Intel P-state performance: 0..100 (%).
# Limit the max/min P-state to control the power dissipation of the CPU.
# Values are stated as a percentage of the available performance.
# Requires an Intel Core i processor with intel_pstate driver.
#CPU_MIN_PERF_ON_AC=0
#CPU_MAX_PERF_ON_AC=100
#CPU_MIN_PERF_ON_BAT=0
#CPU_MAX_PERF_ON_BAT=30
# Set the CPU "turbo boost" feature: 0=disable, 1=allow
# Requires an Intel Core i processor.
# Important:
# - This may conflict with your distribution's governor settings
# - A value of 1 does *not* activate boosting, it just allows it
#CPU_BOOST_ON_AC=1
#CPU_BOOST_ON_BAT=0
# Minimize number of used CPU cores/hyper-threads under light load conditions:
# 0=disable, 1=enable.
SCHED_POWERSAVE_ON_AC=0
SCHED_POWERSAVE_ON_BAT=1
# Kernel NMI Watchdog:
# 0=disable (default, saves power), 1=enable (for kernel debugging only).
NMI_WATCHDOG=0
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
# Frequency voltage pairs are written to:
# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
# CAUTION: only use this, if you thoroughly understand what you are doing!
#PHC_CONTROLS="F:V F:V F:V F:V"
# Set CPU performance versus energy savings policy:
# performance, balance-performance, default, balance-power, power.
# Values are given in order of increasing power saving.
# Requires kernel module msr and x86_energy_perf_policy from linux-tools.
ENERGY_PERF_POLICY_ON_AC=performance
ENERGY_PERF_POLICY_ON_BAT=balance-power
# Disk devices; separate multiple devices with spaces (default: sda).
# Devices can be specified by disk ID also (lookup with: tlp diskid).
DISK_DEVICES="sda sdb"
# Disk advanced power management level: 1..254, 255 (max saving, min, off).
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
DISK_APM_LEVEL_ON_AC="254 254"
DISK_APM_LEVEL_ON_BAT="128 128"
# Hard disk spin down timeout:
# 0: spin down disabled
# 1..240: timeouts from 5s to 20min (in units of 5s)
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
# See 'man hdparm' for details.
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the hardware default for the particular disk.
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
# Select IO scheduler for the disk devices: cfq, deadline, noop (Default: cfq).
# Separate values for multiple disks with spaces. Use the special value 'keep'
# to keep the kernel default scheduler for the particular disk.
#DISK_IOSCHED="cfq cfq"
# AHCI link power management (ALPM) for disk devices:
# min_power, med_power_with_dipm(*), medium_power, max_performance.
# (*) Kernel >= 4.15 required, then recommended.
# Multiple values separated with spaces are tried sequentially until success.
SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
# Exclude host devices from AHCI link power management.
# Separate multiple hosts with spaces.
#SATA_LINKPWR_BLACKLIST="host1"
# Runtime Power Management for AHCI host and disks devices:
# on=disable, auto=enable.
# EXPERIMENTAL ** WARNING: auto will most likely cause system lockups/data loss.
#AHCI_RUNTIME_PM_ON_AC=on
#AHCI_RUNTIME_PM_ON_BAT=on
# Seconds of inactivity before disk is suspended.
AHCI_RUNTIME_PM_TIMEOUT=15
# PCI Express Active State Power Management (PCIe ASPM):
# default, performance, powersave.
PCIE_ASPM_ON_AC=performance
PCIE_ASPM_ON_BAT=powersave
# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
# auto = mid on BAT, high on AC; default = use hardware defaults.
RADEON_POWER_PROFILE_ON_AC=high
RADEON_POWER_PROFILE_ON_BAT=low
# Radeon dynamic power management method (DPM): battery, performance.
RADEON_DPM_STATE_ON_AC=performance
RADEON_DPM_STATE_ON_BAT=battery
# Radeon DPM performance level: auto, low, high; auto is recommended.
RADEON_DPM_PERF_LEVEL_ON_AC=auto
RADEON_DPM_PERF_LEVEL_ON_BAT=auto
# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
WIFI_PWR_ON_AC=off
WIFI_PWR_ON_BAT=on
# Disable wake on LAN: Y/N.
WOL_DISABLE=Y
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
# A value of 0 disables, >=1 enables power saving (recommended: 1).
SOUND_POWER_SAVE_ON_AC=0
SOUND_POWER_SAVE_ON_BAT=0
# Disable controller too (HDA only): Y/N.
SOUND_POWER_SAVE_CONTROLLER=N
# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
# Drive can be powered on again by releasing (and reinserting) the eject lever
# or by pressing the disc eject button on newer models.
# Note: an UltraBay/MediaBay hard disk is never powered off.
BAY_POWEROFF_ON_AC=0
BAY_POWEROFF_ON_BAT=0
# Optical drive device to power off (default sr0).
BAY_DEVICE="sr0"
# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
RUNTIME_PM_ON_AC=on
RUNTIME_PM_ON_BAT=auto
# Exclude PCI(e) device adresses the following list from Runtime PM
# (separate with spaces). Use lspci to get the adresses (1st column).
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
RUNTIME_PM_BLACKLIST="01:00.0"
# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
# prevents accidential power-on of dGPU in hybrid graphics setups.
# Use "" to disable the feature completely.
# Separate multiple drivers with spaces.
#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu nouveau nvidia radeon"
# Set to 0 to disable, 1 to enable USB autosuspend feature.
USB_AUTOSUSPEND=1
# Exclude listed devices from USB autosuspend (separate with spaces).
# Use lsusb to get the ids.
# Note: input devices (usbhid) are excluded automatically
#USB_BLACKLIST="1111:2222 3333:4444"
# Bluetooth devices are excluded from USB autosuspend:
# 0=do not exclude, 1=exclude.
USB_BLACKLIST_BTUSB=0
# Phone devices are excluded from USB autosuspend:
# 0=do not exclude, 1=exclude (enable charging).
USB_BLACKLIST_PHONE=0
# Printers are excluded from USB autosuspend:
# 0=do not exclude, 1=exclude.
USB_BLACKLIST_PRINTER=1
# WWAN devices are excluded from USB autosuspend:
# 0=do not exclude, 1=exclude.
USB_BLACKLIST_WWAN=1
# Include listed devices into USB autosuspend even if already excluded
# by the blacklists above (separate with spaces).
# Use lsusb to get the ids.
#USB_WHITELIST="1111:2222 3333:4444"
# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
# (workaround for USB devices that cause shutdown problems).
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
# on system startup: 0=disable, 1=enable.
# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
# are ignored when this is enabled!
#RESTORE_DEVICE_STATE_ON_STARTUP=0
RESTORE_DEVICE_STATE_ON_STARTUP=1
# Radio devices to disable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
# Radio devices to enable on startup: bluetooth, wifi, wwan.
# Separate multiple devices with spaces.
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
# (workaround for devices that are blocking shutdown).
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
# (to prevent other operating systems from missing radios).
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
# Radio devices to enable on AC: bluetooth, wifi, wwan.
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
# Radio devices to disable on battery: bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
# Radio devices to disable on battery when not in use (not connected):
# bluetooth, wifi, wwan.
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module
# required). Charging starts when the remaining capacity falls below the
# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH value.
# Main / Internal battery (values in %)
#START_CHARGE_THRESH_BAT0=75
#STOP_CHARGE_THRESH_BAT0=80
# Ultrabay / Slice / Replaceable battery (values in %)
#START_CHARGE_THRESH_BAT1=75
#STOP_CHARGE_THRESH_BAT1=80
# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
#RESTORE_THRESHOLDS_ON_BAT=1
# ------------------------------------------------------------------------------
# tlp-rdw - Parameters for the radio device wizard
# Possible devices: bluetooth, wifi, wwan.
# Hints:
# - Parameters are disabled by default, remove the leading # to enable them
# - Separate multiple radio devices with spaces
# Radio devices to disable on connect.
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
# Radio devices to enable on disconnect.
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
# Radio devices to enable/disable when docked.
#DEVICES_TO_ENABLE_ON_DOCK=""
#DEVICES_TO_DISABLE_ON_DOCK=""
# Radio devices to enable/disable when undocked.
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
#DEVICES_TO_DISABLE_ON_UNDOCK=""
:header-args+: :tangle ~/.xprofile
~/.xprofile is similar in style to ~/.xinitrc, but on the
contrary, it’s automatically sourced by LightDM, my display manager of
choice.
xset -b # disable bell
xset r rate 200 45 # repeat delay (ms) and rate (repeats/sec)
# setxkbmap -option compose:ralt
setxkbmap -option ctrl:nocaps # turn capslock into control
setxkbmap -option altwin:swap_alt_win # swap alt and super
if [ $(hostname) = "plasma" ]
then
setxkbmap -option ctrl:rctrl_ralt # turn right control into right alt
fi
if [ $(hostname) = "enigma" ]
then
xmodmap -e "keycode 135 = Alt_R" # remap menu key to alt
fi
light -Scrs "intel_backlight" 2
source $HOME/.zprofile
export _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
if [ $(hostname) = "plasma" ]
then
unlock-def-gk.py &
fi
bspwm &#include ".Xresources.d/fonts"
! #include ".Xresources.d/colors"
#include ".Xresources.d/emacs"
#include ".Xresources.d/rxvt-unicode"
:header-args+: :tangle (when (eq system-type ‘gnu/linux) “~/.Xresources.d/fonts”)
Xft.lcdfilter: lcddefault
Xft.antialias: true
Xft.autohint: 0
Xft.hinting: true
Xft.hintstyle: hintslight
! Xft.hintstyle: hintfull
Xft.rgba: rgb
Xft.dpi: 96
:header-args+: :tangle (when (eq system-type ‘gnu/linux) “~/.Xresources.d/colors”)
#include "gruvbox-light.xresources"
! #include "gruvbox-dark.xresources"
#include "gruvbox-urxvt256.xresources"
! -----------------------------------------------------------------------------
! File: gruvbox-light.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <[email protected]>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 6 Sep 2014
! -----------------------------------------------------------------------------
! hard contrast: *background: #f9f5d7
*background: #fbf1c7
! soft contrast: *background: #f2e5bc
*foreground: #3c3836
! Black + DarkGrey
*color0: #fdf4c1
*color8: #928374
! DarkRed + Red
*color1: #cc241d
*color9: #9d0006
! DarkGreen + Green
*color2: #98971a
*color10: #79740e
! DarkYellow + Yellow
*color3: #d79921
*color11: #b57614
! DarkBlue + Blue
*color4: #458588
*color12: #076678
! DarkMagenta + Magenta
*color5: #b16286
*color13: #8f3f71
! DarkCyan + Cyan
*color6: #689d6a
*color14: #427b58
! LightGrey + White
*color7: #7c6f64
*color15: #3c3836
! -----------------------------------------------------------------------------
! File: gruvbox-dark.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <[email protected]>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 6 Sep 2014
! -----------------------------------------------------------------------------
! hard contrast: *background: #1d2021
*background: #282828
! soft contrast: *background: #32302f
*foreground: #ebdbb2
! Black + DarkGrey
*color0: #282828
*color8: #928374
! DarkRed + Red
*color1: #cc241d
*color9: #fb4934
! DarkGreen + Green
*color2: #98971a
*color10: #b8bb26
! DarkYellow + Yellow
*color3: #d79921
*color11: #fabd2f
! DarkBlue + Blue
*color4: #458588
*color12: #83a598
! DarkMagenta + Magenta
*color5: #b16286
*color13: #d3869b
! DarkCyan + Cyan
*color6: #689d6a
*color14: #8ec07c
! LightGrey + White
*color7: #a89984
*color15: #ebdbb2
! -----------------------------------------------------------------------------
! File: gruvbox-urxvt256.xresources
! Description: Retro groove colorscheme generalized
! Author: morhetz <[email protected]>
! Source: https://github.com/morhetz/gruvbox-generalized
! Last Modified: 13 Dec 2013
! -----------------------------------------------------------------------------
URxvt.color24: #076678
URxvt.color66: #427b58
URxvt.color88: #9d0006
URxvt.color96: #8f3f71
URxvt.color100: #79740e
URxvt.color108: #8ec07c
URxvt.color109: #83a598
URxvt.color130: #af3a03
URxvt.color136: #b57614
URxvt.color142: #b8bb26
URxvt.color167: #fb4934
URxvt.color175: #d3869b
URxvt.color208: #fe8019
URxvt.color214: #fabd2f
URxvt.color223: #ebdbb2
URxvt.color228: #f2e5bc
URxvt.color229: #fbf1c7
URxvt.color230: #f9f5d7
URxvt.color234: #1d2021
URxvt.color235: #282828
URxvt.color236: #32302f
URxvt.color237: #3c3836
URxvt.color239: #504945
URxvt.color241: #665c54
URxvt.color243: #7c6f64
URxvt.color244: #928374
URxvt.color245: #928374
URxvt.color246: #a89984
URxvt.color248: #bdae93
URxvt.color250: #d5c4a1
:header-args+: :tangle (when (eq system-type ‘gnu/linux) “~/.Xresources.d/emacs”)
Emacs.menuBar: off
Emacs.toolBar: off
Emacs.verticalScrollBars: off
Emacs.cursorBlink: off
Emacs.FontBackend: xft,x
! Emacs.font: Ubuntu Mono-12
! Emacs.font: Triplicate T4C-11
! Emacs.font: Ubuntu Mono-10.5
! Emacs.font: Ubuntu Mono-12
! Emacs.font: Iosevka-11
! Emacs.font: Fira Mono:size=15
! Emacs.font: DejaVu Sans Mono:size=15
! Emacs.font: Inconsolata:size=17
! Emacs.font: Inconsolata:size=16
! Emacs.font: Inconsolata LGC:size=14
! Emacs.font: Source Code Pro Medium-10.5
Emacs.font: Ubuntu Mono:size=16
! Emacs.font: Iosevka:size=16
:header-args+: :tangle (when (eq system-type ‘gnu/linux) “~/.Xresources.d/rxvt-unicode”)
! Font
URxvt.font: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true
URxvt.boldFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bold
URxvt.italicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:italic
URxvt.bolditalicFont: xft:ubuntu mono:pixelsize=16:antialias=true:hinting=true:bold:italic, xft:dejavu sans mono:pixelsize=15:antialias=true:hinting=true:bolditalic
URxvt.xftAntialias: true
URxvt.letterSpace: 0
URxvt.depth: 0
URxvt.loginShell: true
URxvt.saveLines: 100000
URxvt.internalBorder: 3
URxvt.lineSpace: 0
URxvt.scrollBar: false
URxvt.scrollStyle: rxvt
URxvt*scrollTtyOutput: false
URxvt*scrollWithBuffer: true
URxvt*scrollTtyKeypress: true
URxvt.keysym.Shift-Up: command:\033]720;1\007
URxvt.keysym.Shift-Down: command:\033]721;1\007
URxvt.perl-ext-common: default,clipboard,url-select,keyboard-select
URxvt.perl-ext: bidi
URxvt.bidi.enabled: 1
URxvt.url-select.launcher: firefox
URxvt.url-select.underline: true
URxvt.keysym.M-u: perl:url-select:select_next
URxvt.keysym.M-Escape: perl:keyboard-select:activate
URxvt.keysym.M-s: perl:keyboard-select:search
URxvt.url-launcher: /usr/bin/firefox
URxvt.matcher.button: 1
URxvt.iso14755: false
URxvt.iso14755_53: false
URxvt.keysym.M-c: perl:clipboard:copy
URxvt.keysym.M-v: perl:clipboard:paste
URxvt.keysym.C-A-V: perl:clipboard:paste_escaped
URxvt.keysym.C-Up: font-size:increase
URxvt.keysym.C-Down: font-size:decrease
URxvt.keysym.C-S-Up: font-size:incglobal
URxvt.keysym.C-S-Down: font-size:decglobal
URxvt.keysym.C-equal: font-size:reset
!URxvt.keysym.C-question: font-size:show
URxvt.iconFile: /usr/share/icons/Paper/48x48/apps/utilities-terminal.png
!urxvt*foreground: white
!urxvt*background: black
!*color0: #2E3436
!*color1: #a40000
!*color2: #4E9A06
!*color3: #C4A000
!*color4: #3465A4
!*color5: #75507B
!*color6: #ce5c00
!*color7: #babdb9
!*color8: #555753
!*color9: #EF2929
!*color10: #8AE234
!*color11: #FCE94F
!*color12: #729FCF
!*color13: #AD7FA8
!*color14: #fcaf3e
!*color15: #EEEEEC
!URxvt.foreground: #C8C8C8
!URxvt.background: #FFFFFF
!! black
!*color0: #2E3436
!*color8: #555753
!! red
!*color1: #a40000
!*color9: #EF2929
!! green
!*color2: #4E9A06
!*color10: #8AE234
!! yellow
!*color3: #C4A000
!*color11: #FCE94F
!! blue
!*color4: #3465A4
!*color12: #729FCF
!! purple
!*color5: #75507B
!*color13: #AD7FA8
!! orange (replaces cyan)
!*color6: #ce5c00
!*color14: #fcaf3e
!! white
!*color7: #babdb9
!*color15: #EEEEEC
! Tango colour theme for rxvt-unicode
URxvt.background: #FFFFFF
URxvt.foreground: #000000
! Black
URxvt.color0: #2E3436
URxvt.color8: #757773
! Red
URxvt.color1: #CC0000
URxvt.color9: #EF2929
! Green
URxvt.color2: #4E9A06
URxvt.color10: #8AE234
! Yellow
URxvt.color3: #C4A000
URxvt.color11: #FCE94F
! Blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF
! Magenta
URxvt.color5: #75507B
URxvt.color13: #AD7FA8
!! Cyan
!URxvt.color6: #06989A
!URxvt.color14: #34E2E2
! orange (replaces cyan)
*color6: #ce5c00
*color14: #fcaf3e
! White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
:header-args+: :tangle ~/.config/user-dirs.dirs
XDG_DESKTOP_DIR="$HOME/Desktop"
XDG_DOCUMENTS_DIR="$HOME/usr/docs"
XDG_DOWNLOAD_DIR="$HOME/usr/dls"
XDG_MUSIC_DIR="$HOME/usr/music"
XDG_PICTURES_DIR="$HOME/usr/pics"
XDG_PUBLICSHARE_DIR="$HOME/usr/Public"
XDG_TEMPLATES_DIR="$HOME/usr/Templates"
XDG_VIDEOS_DIR="$HOME/usr/vids"
:header-args+: :tangle ~/.config/zathura/zathurarc
set smooth-scroll true
set selection-clipboard clipboard
set zoom-step 05
set default-bg "#272727"
set statusbar-bg "#272727"
set inputbar-bg "#373737"
My zsh setup is built on Zim. Further, my zshrc references fzf, zsh-autosuggestions, and zsh-autopair; so be sure to have them installed.
:header-args+: :tangle ~/.zimrc#################
# CORE SETTINGS #
#################
#
# Zim settings
#
# Select what modules you would like enabled.
# The second line of modules may depend on options set by modules in the first
# line. These dependencies are noted on the respective module's README.md.
zmodules=(directory environment git git-info history input ssh utility custom \
syntax-highlighting history-substring-search prompt completion)
###################
# MODULE SETTINGS #
###################
#
# Prompt
#
# Set your desired prompt here
zprompt_theme='pure'
#PURE_PROMPT_SYMBOL=λ
#PURE_PROMPT_SYMBOL=δ
PURE_PROMPT_SYMBOL=➜
#
# Completion
#
# set an optional host-specific filename for the completion cache file
# if none is provided, the default '.zcompdump' is used.
#zcompdump_file=".zcompdump-${HOST}-${ZSH_VERSION}"
#
# Utility
#
# Uncomment to enable command correction prompts
# See: http://zsh.sourceforge.net/Doc/Release/Options.html#Input_002fOutput
setopt CORRECT
#
# Environment
#
# Set the string below to the desired terminal title format string.
# The terminal title is redrawn upon directory change, however, variables like
# ${PWD} are only evaluated once. Use prompt expansion strings for dynamic data:
# http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Simple-Prompt-Escapes
# The example below uses the following format: 'username@host:/current/directory'
ztermtitle='%n@%m:%~'
#
# Input
#
# Uncomment to enable double-dot expansion.
# This appends '../' to your input for each '.' you type after an initial '..'
#zdouble_dot_expand='true'
#
# Syntax-Highlighting
#
# This determines what highlighters will be used with the syntax-highlighting module.
# Documentation of the highlighters can be found here:
# https://github.com/zsh-users/zsh-syntax-highlighting/blob/master/docs/highlighters.md
# For (u)rxvt, termite and gnome-terminal users,
# removing the 'cursor' highlighter will fix the disappearing cursor problem
#zhighlighters=(main brackets cursor)
zhighlighters=(main brackets pattern)
#
# SSH
#
# Load these ssh identities with the ssh module
zssh_ids=(id_rsa plasma_id_rsa id_ed25519 id_rsa_aur)
#
# Pacman
#
# Set (optional) pacman front-end.
zpacman_frontend='yay'
# Load any helper scripts as defined here
#zpacman_helper=(aur)#
# User configuration sourced by login shells
#
# Initialize zim
[[ -s ${ZIM_HOME}/login_init.zsh ]] && source ${ZIM_HOME}/login_init.zsh#PATH="$(ruby -e 'print Gem.user_dir')/bin:$PATH"
#PATH=$HOME/.gem/ruby/2.4.0/bin:$PATH
export PATH=$HOME/.local/bin:$HOME/.cabal/bin:$HOME/.cargo/bin:$HOME/.elan/bin:$PATH
export XDG_CONFIG_HOME=$HOME/.config
export XDG_DATA_HOME=$HOME/.local/share
export XDG_DATA_DIRS=/usr/local/share:/usr/share
export MAILDIR="$HOME/mail"
export CVS_RSH=ssh
#export MATHMODELS=$HOME/src/eiffel/mathmodels
#export RUST_SRC_PATH=~/.multirust/toolchains/stable-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/src
#export PATH=$PATH:$HOME/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/bin/
# Eiffel2Java stuff
#export JAVA_HOME=/usr/lib/jvm/default
#export CPATH=$CPATH:"$JAVA_HOME/include:$JAVA_HOME/include/linux"
#export LIBRARY_PATH=$LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
#export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:"$JAVA_HOME/jre/lib/amd64/server"
#export PATH="$HOME/usr/build/pvs:$PATH"
#export SBCLISP_HOME=/usr/share/sbcl-source
#export PVS_LIBRARY_PATH="$HOME/usr/build/pvs/nasalib"
export MOZ_USE_XINPUT2=1 # precise scrolling in firefox
#export JAVA_HOME=/usr/lib/jvm/java-8-openjdk
#export ANDROID_JACK_VM_ARGS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4G"
if [ -e /home/amin/.nix-profile/etc/profile.d/nix.sh ]; then . /home/amin/.nix-profile/etc/profile.d/nix.sh; fi # added by Nix installer# Ensure that a non-login, non-interactive shell has a defined environment.
if [[ "$SHLVL" -eq 1 && ! -o LOGIN && -s "${ZDOTDIR:-$HOME}/.zprofile" ]]; then
source "${ZDOTDIR:-$HOME}/.zprofile"
fi# Bash-like navigation
#export WORDCHARS='*?_-.[]~=&;!#$%^(){}<>'
#export WORDCHARS='*?-[]~=&;!#$%^(){}<>'
export WORDCHARS='*?[]~=&;!#$%^(){}<>'
#ZLE_SPACE_SUFFIX_CHARS=$'|&'
#disable -r time # disable shell reserved word
#alias time='time -p' # -p for POSIX output
# rehash if last command was pacaur or pacman
# (so that zsh picks up changes in $PATH immediately)
TRAPUSR1() { rehash}; precmd() { [[ $history[$[ HISTCMD -1 ]] == *(pacaur|pacman)* ]] && killall -USR1 zsh }
#
# User configuration sourced by interactive shells
#
# Change default zim location
export ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
# Start zim
[[ -s ${ZIM_HOME}/init.zsh ]] && source ${ZIM_HOME}/init.zsh
ZSH_HIGHLIGHT_PATTERNS+=('rm -rf *' 'fg=white,bold,bg=red')
#ZSH_HIGHLIGHT_STYLES[unknown-token]='fg=red,bold'
setopt globdots
source ~/.zsh/zsh-autosuggestions/zsh-autosuggestions.zsh
source ~/.zsh/zsh-autopair/autopair.zsh
### fzf ###
source /usr/share/fzf/key-bindings.zsh
source /usr/share/fzf/completion.zsh
# Accept history selection instead of putting it on
# the command line
fzf-history-widget-accept() {
fzf-history-widget
zle accept-line
}
#zle -N fzf-history-widget-accept
#bindkey '^R' fzf-history-widget-accept
# alt+c preview
export FZF_ALT_C_OPTS="--preview 'tree -C {} | head -200'"
### fzf ###
# aliases
alias mpv="mpv --ytdl-format mp4"
alias mv="mv -iv"
alias cp="cp -iv"
alias scl=systemctl
alias jcl=journalctl
alias m="mbsync -Va; getmail; notmuch new"
alias best="youtube-dl -f best"
alias nixx="ssh [email protected]"
alias fence="ssh [email protected]"
aur() {
cd ~/usr/build
git clone https://aur.archlinux.org/${1}.git
cd ${1}
}
# i-beam cursor
echo -e "\033[5 q"
#echo -e "\033[6 q"This section contains various useful scripts and the ones used by the
programs above. For instance, toggle-tablet for switching to and
from tablet mode on my X220T, toggle-presentation-mode for toggling
Xfce’s presentation mode which keeps the screen awake, and
rofi-light a small utility that uses Rofi to ask and light to set an
exact brightness value.
dbus_send() {
label=$1
dbus-send --print-reply=literal --system \
--dest=org.freedesktop.UPower \
/org/freedesktop/UPower/devices/battery_BAT0 \
org.freedesktop.DBus.Properties.Get \
string:org.freedesktop.UPower.Device \
string:"${label}" | awk '{print $3}'
}
perc=$(dbus_send 'Percentage')
state=$(dbus_send 'State')
if [ "$state" -eq 2 ]; then # Discharging
secs=$(dbus_send 'TimeToEmpty')
elif [ "$state" -eq 1 ]; then # Charging
secs=$(dbus_send 'TimeToFull')
fi
printf '%s%%%%%2dh%02dm \n' "$perc" $((secs / 3600)) $((secs % 3600 / 60))cur=$(light -G)
val=$(rofi -dmenu -mesg "light $cur" -p "light -S " -l 0 -width 12)
light -S $valexport _JAVA_AWT_WM_NONREPARENTING=1
export _JAVA_OPTIONS='-Dawt.useSystemAAFontSettings=on -Dswing.aatext=true'
light -Scrs "intel_backlight" 2
source $HOME/.zprofile
swaycurr_ws=$(swaymsg -t get_workspaces | jq -r '.[] | select(.focused==true).name')
[[ $curr_ws -eq 1 ]] && prev_ws=10 || prev_ws=$((curr_ws-1))
[[ $curr_ws -eq 10 ]] && next_ws=1 || next_ws=$((curr_ws+1))
dest_ws=-1
op=-1
if [ "$1" = "switch" ] || [ "$1" = "move" ]; then
op="$1"
if [ "$2" = "prev" ]; then
dest_ws="$prev_ws"
elif [ "$2" = "next" ]; then
dest_ws="$next_ws"
else
echo "Usage: $0 $1 {prev|next} [follow]"
exit 1
fi
else
echo "Usage: $0 {switch|move} {prev|next} [follow]"
exit 1
fi
if [ "$op" = "switch" ]; then
sway workspace "$dest_ws"
elif [ "$op" = "move" ]; then
sway move container to workspace "$dest_ws"
if [ "$3" = "follow" ]; then
sway workspace "$dest_ws"
fi
filang="$(setxkbmap -print | grep xkb_symbols | cut -d'+' -f 2)"
if [ "$lang" = "us" ]; then
setxkbmap ir
else
setxkbmap us
# xmodmap $HOME/.Xmodmap
fixfconf-query -c xfce4-power-manager -p /xfce4-power-manager/presentation-mode -TThis script toggles between a ‘normal’ mode and a ‘tablet’ mode, doing a few things:
- rotates the screen using
xrandr, so that rotating the physical display of my X220t would have the laptop’s battery on the right hand side, - enables touch screen,
- properly rotates the stylus pen and touch screen pointers, and
- toggles between RGB and Vertical BGR sub-pixel order.
case $(xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation) in
0) # Screen is not rotated, we should rotate it right (90°)
xrandr -o 3
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 1
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 1
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 1
xfconf-query -c xsettings -p /Xft/RGBA -s vbgr
;;
1) # Currently top is rotated right, we should set it normal (0°)
xrandr -o 0
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation -s 0
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Wacom_Rotation -s 0
xfconf-query -c pointers -p /Wacom_ISDv4_E6_Finger_touch/Properties/Device_Enabled -s 0
xfconf-query -c xsettings -p /Xft/RGBA -s rgb
;;
*)
echo "Unknown result from 'xfconf-query -c pointers -p /Wacom_ISDv4_E6_Pen_stylus/Properties/Wacom_Rotation'" >&2
exit 1
;;
esacimport gnomekeyring as gk
# list_item_ids_sync('login')[0] == 1L
gk.unlock_sync('Default_keyring',gk.item_get_info_sync('login',1L).get_secret())cur_vol=$(pamixer --get-volume)
if [ $(pamixer --get-mute) = true ]; then
printf 'mt \n' "$cur_vol"
else
printf '%02d \n' "$cur_vol"
fiMy little wallpaper changer script.
:header-args+: :tangle ~/.local/bin/wp :shebang “#!/bin/bash”export DISPLAY=:0
case "$1" in
"day")
feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
;;
"night")
feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
;;
*)
echo $"Usage: $0 {day|night}"
exit 1
esacSED=$(which sed)
ROFI=$(which rofi)
export DISPLAY=:0
HOUR=$(date +%H)
if [ -z "${SED}" ]
then
echo "Did not find 'sed', script cannot continue."
exit 1
fi
if [ -z "${ROFI}" ]
then
echo "Did not find rofi, there is no point to continue."
exit 1
fi
###
# Create if not exists, then removes #include of .theme file (if present) and add the selected theme to the end.
# Repeated calls should leave the config clean-ish
###
function set_theme()
{
CDIR="${HOME}/.config/rofi/"
if [ ! -d "${CDIR}" ]
then
mkdir -p ${CDIR}
fi
if [ -f "${CDIR}/config" ]
then
${SED} -i "/rofi\.theme: .*\.rasi$/d" "${CDIR}/config"
fi
echo "rofi.theme: ${1}" >> "${CDIR}/config"
}
if [ "$HOUR" -gt "19" ] || [ "$HOUR" -lt "7" ]
then
feh --bg-scale $HOME/usr/pics/island_night_by_arsenixc-d6cz757.jpg
xrdb -merge $HOME/.Xresources.d/gruvbox-dark.xresources
set_theme "/usr/share/rofi/themes//gruvbox-dark.rasi"
else
feh --bg-scale $HOME/usr/pics/island_day_by_arsenixc-d6ctqon.jpg
xrdb -merge $HOME/.Xresources.d/gruvbox-light.xresources
set_theme "/usr/share/rofi/themes//gruvbox-light.rasi"
fi[Unit]
Description=wallpaper service
[Service]
Type=oneshot
ExecStart=/usr/bin/bash -c %h/.local/bin/wp-auto
:header-args+: :tangle ~/.config/systemd/user/wp.timer
[Unit]
[Unit]
Description=wallpaper timer
[Timer]
OnCalendar=07,21:00
Unit=wp.service
Persistent=true
[Install]
WantedBy=timers.target
:header-args+: :tangle ~/.local/bin/zathura-sync.sh :shebang “#!/bin/sh”
pos="$1"
pdffile="$2"
zathura --synctex-forward "$pos" "$pdffile" || \
(
zathura -x "emacsclient --eval '(progn (switch-to-buffer (file-name-nondirectory \"%{input}\")) (goto-line %{line}))'" "$pdffile" &
sleep 1; zathura --synctex-forward "$pos" "$pdffile" )# Original Posted at http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
# [ESC] character in original post removed here.
# ANSI Color -- use these variables to easily have different color
# and format output. Make sure to output the reset sequence after
# colors (f = foreground, b = background), and use the 'off'
# feature for anything you turn on.
initializeANSI()
{
esc="$(echo -en '\e')"
blackf="${esc}[30m"; redf="${esc}[31m"; greenf="${esc}[32m"
yellowf="${esc}[33m" bluef="${esc}[34m"; purplef="${esc}[35m"
cyanf="${esc}[36m"; whitef="${esc}[37m"
blackb="${esc}[40m"; redb="${esc}[41m"; greenb="${esc}[42m"
yellowb="${esc}[43m" blueb="${esc}[44m"; purpleb="${esc}[45m"
cyanb="${esc}[46m"; whiteb="${esc}[47m"
boldon="${esc}[1m"; boldoff="${esc}[22m"
italicson="${esc}[3m"; italicsoff="${esc}[23m"
ulon="${esc}[4m"; uloff="${esc}[24m"
invon="${esc}[7m"; invoff="${esc}[27m"
reset="${esc}[0m"
}
# note in this first use that switching colors doesn't require a reset
# first - the new color overrides the old one.
#clear
initializeANSI
cat << EOF
${yellowf} ▄███████▄${reset} ${redf} ▄██████▄${reset} ${greenf} ▄██████▄${reset} ${bluef} ▄██████▄${reset} ${purplef} ▄██████▄${reset} ${cyanf} ▄██████▄${reset}
${yellowf}▄█████████▀▀${reset} ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄${reset} ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄${reset} ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄${reset} ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄${reset} ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
${yellowf}███████▀${reset} ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███${reset} ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███${reset} ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███${reset} ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███${reset} ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
${yellowf}███████▄${reset} ${redf}████████████${reset} ${greenf}████████████${reset} ${bluef}████████████${reset} ${purplef}████████████${reset} ${cyanf}████████████${reset}
${yellowf}▀█████████▄▄${reset} ${redf}██▀██▀▀██▀██${reset} ${greenf}██▀██▀▀██▀██${reset} ${bluef}██▀██▀▀██▀██${reset} ${purplef}██▀██▀▀██▀██${reset} ${cyanf}██▀██▀▀██▀██${reset}
${yellowf} ▀███████▀${reset} ${redf}▀ ▀ ▀ ▀${reset} ${greenf}▀ ▀ ▀ ▀${reset} ${bluef}▀ ▀ ▀ ▀${reset} ${purplef}▀ ▀ ▀ ▀${reset} ${cyanf}▀ ▀ ▀ ▀${reset}
${boldon}${yellowf} ▄███████▄ ${redf} ▄██████▄ ${greenf} ▄██████▄ ${bluef} ▄██████▄ ${purplef} ▄██████▄ ${cyanf} ▄██████▄${reset}
${boldon}${yellowf}▄█████████▀▀ ${redf}▄${whitef}█▀█${redf}██${whitef}█▀█${redf}██▄ ${greenf}▄${whitef}█▀█${greenf}██${whitef}█▀█${greenf}██▄ ${bluef}▄${whitef}█▀█${bluef}██${whitef}█▀█${bluef}██▄ ${purplef}▄${whitef}█▀█${purplef}██${whitef}█▀█${purplef}██▄ ${cyanf}▄${whitef}█▀█${cyanf}██${whitef}█▀█${cyanf}██▄${reset}
${boldon}${yellowf}███████▀ ${redf}█${whitef}▄▄█${redf}██${whitef}▄▄█${redf}███ ${greenf}█${whitef}▄▄█${greenf}██${whitef}▄▄█${greenf}███ ${bluef}█${whitef}▄▄█${bluef}██${whitef}▄▄█${bluef}███ ${purplef}█${whitef}▄▄█${purplef}██${whitef}▄▄█${purplef}███ ${cyanf}█${whitef}▄▄█${cyanf}██${whitef}▄▄█${cyanf}███${reset}
${boldon}${yellowf}███████▄ ${redf}████████████ ${greenf}████████████ ${bluef}████████████ ${purplef}████████████ ${cyanf}████████████${reset}
${boldon}${yellowf}▀█████████▄▄ ${redf}██▀██▀▀██▀██ ${greenf}██▀██▀▀██▀██ ${bluef}██▀██▀▀██▀██ ${purplef}██▀██▀▀██▀██ ${cyanf}██▀██▀▀██▀██${reset}
${boldon}${yellowf} ▀███████▀ ${redf}▀ ▀ ▀ ▀ ${greenf}▀ ▀ ▀ ▀ ${bluef}▀ ▀ ▀ ▀ ${purplef}▀ ▀ ▀ ▀ ${cyanf}▀ ▀ ▀ ▀${reset}
EOF#
# ANSI color scheme script featuring Space Invaders
#
# Original: http://crunchbang.org/forums/viewtopic.php?pid=126921%23p126921#p126921
# Modified by lolilolicon
#
f=3 b=4
for j in f b; do
for i in {0..7}; do
printf -v $j$i %b "\e[${!j}${i}m"
done
done
bld=$'\e[1m'
rst=$'\e[0m'
cat << EOF
$f1 ▀▄ ▄▀ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4 ▀▄ ▄▀ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
$f1 ▄█▀███▀█▄ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4 ▄█▀███▀█▄ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
$f1█▀███████▀█ $f2▀▀███▀▀███▀▀ $f3▀█▀██▀█▀ $f4█▀███████▀█ $f5▀▀███▀▀███▀▀ $f6▀█▀██▀█▀$rst
$f1▀ ▀▄▄ ▄▄▀ ▀ $f2 ▀█▄ ▀▀ ▄█▀ $f3▀▄ ▄▀ $f4▀ ▀▄▄ ▄▄▀ ▀ $f5 ▀█▄ ▀▀ ▄█▀ $f6▀▄ ▄▀$rst
$bld$f1▄ ▀▄ ▄▀ ▄ $f2 ▄▄▄████▄▄▄ $f3 ▄██▄ $f4▄ ▀▄ ▄▀ ▄ $f5 ▄▄▄████▄▄▄ $f6 ▄██▄ $rst
$bld$f1█▄█▀███▀█▄█ $f2███▀▀██▀▀███ $f3▄█▀██▀█▄ $f4█▄█▀███▀█▄█ $f5███▀▀██▀▀███ $f6▄█▀██▀█▄$rst
$bld$f1▀█████████▀ $f2▀▀▀██▀▀██▀▀▀ $f3▀▀█▀▀█▀▀ $f4▀█████████▀ $f5▀▀▀██▀▀██▀▀▀ $f6▀▀█▀▀█▀▀$rst
$bld$f1 ▄▀ ▀▄ $f2▄▄▀▀ ▀▀ ▀▀▄▄ $f3▄▀▄▀▀▄▀▄ $f4 ▄▀ ▀▄ $f5▄▄▀▀ ▀▀ ▀▀▄▄ $f6▄▀▄▀▀▄▀▄$rst
$f7▌$rst
$f7▌$rst
$f7 ▄█▄ $rst
$f7▄█████████▄$rst
$f7▀▀▀▀▀▀▀▀▀▀▀$rst
EOF