KNOMI1

Online manual & customize UI tutorials：here

KNOMI2

Online manual ：here

Klipper config

KNOMI.cfg is the klipper config of the latest version firmware

Firmware source code

Here is the firmware source code for both KNOMI1 and KNOMI2.

Firmware update

OTA

Download the pre compiled firmware from GitHub(KNOMI1 and KNOMI2) or build your own firmware
Enter KNOMI's IP or hostname (default is knomi.local) in the browser of a device with the same LAN as knomi, and then click Update FW
Select the firmware file just downloaded to start updating. After the update is complete, KNOMI will automatically restart and run the new firmware.

Using `Flash Download Tools` from Espressif

This step is used when KNOMI1 does not have OTA feature, or KNOMI cannot start and run OTA feature normally

Refer to the steps here, but use firmware files from this repository.(KNOMI1 and KNOMI2)