Merge pull request #1385 from jeckersb/update-generated

docs: Update generated

Author: cgwalters

docs/src/host-v1.schema.json

@@ -119,7 +119,8 @@
       "type": "object",
       "required": [
         "checksum",
-        "deploySerial"
+        "deploySerial",
+        "stateroot"
       ],
       "properties": {
         "checksum": {
@@ -131,6 +132,10 @@
           "type": "integer",
           "format": "uint32",
           "minimum": 0.0
+        },
+        "stateroot": {
+          "description": "The name of the storage for /etc and /var content",
+          "type": "string"
         }
       }
     },
@@ -194,6 +199,13 @@
             }
           ]
         },
+        "otherDeployments": {
+          "description": "Other deployments (i.e. pinned)",
+          "type": "array",
+          "items": {
+            "$ref": "#/definitions/BootEntry"
+          }
+        },
         "rollback": {
           "description": "The previously booted image",
           "anyOf": [
@@ -311,10 +323,15 @@
       "description": "The status of the booted image",
       "type": "object",
       "required": [
+        "architecture",
         "image",
         "imageDigest"
       ],
       "properties": {
+        "architecture": {
+          "description": "The hardware architecture of this image",
+          "type": "string"
+        },
         "image": {
           "description": "The currently booted image",
           "allOf": [

docs/src/man/bootc-container-lint.md

@@ -6,7 +6,8 @@ checks as part of a container build
 # SYNOPSIS
 
 **bootc container lint** \[**\--rootfs**\] \[**\--fatal-warnings**\]
-\[**\--list**\] \[**\--skip**\] \[**-h**\|**\--help**\]
+\[**\--list**\] \[**\--skip**\] \[**\--no-truncate**\]
+\[**-h**\|**\--help**\]
 
 # DESCRIPTION
 
@@ -29,7 +30,7 @@ part of a build process; it will error if any problems are detected.
 **\--list**
 
 :   Instead of executing the lints, just print all available lints. At
-    the current time, this will output in YAML format because its
+    the current time, this will output in YAML format because it\'s
     reasonably human friendly. However, there is no commitment to
     maintaining this exact format; do not parse it via code or scripts
 
@@ -40,10 +41,16 @@ part of a build process; it will error if any problems are detected.
 
     Example: \--skip nonempty-boot \--skip baseimage-root
 
+**\--no-truncate**
+
+:   Don\'t truncate the output. By default, only a limited number of
+    entries are shown for each lint, followed by a count of remaining
+    entries
+
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-container.md

@@ -30,4 +30,4 @@ bootc-container-help(8)
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-edit.md

@@ -28,12 +28,12 @@ Only changes to the \`spec\` section are honored.
 
 **\--quiet**
 
-:   Dont display progress
+:   Don\'t display progress
 
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-install-ensure-completion.md

@@ -23,8 +23,8 @@ your code is using \`bootc install to-filesystem\` from the start.
 
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-install-finalize.md

@@ -24,4 +24,4 @@ to-filesystem\`
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-install-print-configuration.md

@@ -23,8 +23,8 @@ string-valued filesystem name suitable for passing to \`mkfs.\$type\`.
 
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-install-to-disk.md

@@ -7,9 +7,8 @@ bootc-install-to-disk - Install to the target block device
 **bootc install to-disk** \[**\--wipe**\] \[**\--block-setup**\]
 \[**\--filesystem**\] \[**\--root-size**\] \[**\--source-imgref**\]
 \[**\--target-transport**\] \[**\--target-imgref**\]
-\[**\--enforce-container-sigpolicy**\]
-\[**\--skip-fetch-check**\] \[**\--run-fetch-check**\]
-\[**\--disable-selinux**\] \[**\--karg**\]
+\[**\--enforce-container-sigpolicy**\] \[**\--run-fetch-check**\]
+\[**\--skip-fetch-check**\] \[**\--disable-selinux**\] \[**\--karg**\]
 \[**\--root-ssh-authorized-keys**\] \[**\--generic-image**\]
 \[**\--bound-images**\] \[**\--stateroot**\] \[**\--via-loopback**\]
 \[**-h**\|**\--help**\] \<*DEVICE*\>
@@ -63,8 +62,8 @@ more complex such as RAID, LVM, LUKS etc.
 
     By default, bootc install and install-to-filesystem assumes that it
     runs in a podman container, and it takes the container image to
-    install from the podmans container registry. If \--source-imgref is
-    given, bootc uses it as the installation source, instead of the
+    install from the podman\'s container registry. If \--source-imgref
+    is given, bootc uses it as the installation source, instead of the
     behaviour explained in the previous paragraph. See skopeo(1) for
     accepted formats.
 
@@ -84,16 +83,17 @@ more complex such as RAID, LVM, LUKS etc.
     Enabling this option enforces that \`/etc/containers/policy.json\`
     includes a default policy which requires signatures
 
-**\--skip-fetch-check (deprecated, see --run-fetch-check)**
+**\--run-fetch-check**
 
-:   This is now the default and has no effect.
+:   Verify the image can be fetched from the bootc image. Updates may
+    fail when the installation host is authenticated with the registry
+    but the pull secret is not in the bootc image
 
-**\--run-fetch-check **
+**\--skip-fetch-check**
 
-:   Verify the target image can be pulled using the bootc image.
-
-    This will ensure the bootc system can be upgraded,
-    i.e. the registry credentials are available on the bootc image.
+:   Verify the image can be fetched from the bootc image. Updates may
+    fail when the installation host is authenticated with the registry
+    but the pull secret is not in the bootc image
 
 **\--disable-selinux**
 
@@ -135,11 +135,11 @@ more complex such as RAID, LVM, LUKS etc.
     \
     *Possible values:*
 
-    -   stored: Bound images must exist in the sources root container
+    -   stored: Bound images must exist in the source\'s root container
         storage (default)
 
     -   pull: Bound images will be pulled and stored directly in the
-        targets bootc container storage
+        target\'s bootc container storage
 
 **\--stateroot**=*STATEROOT*
 
@@ -151,7 +151,7 @@ more complex such as RAID, LVM, LUKS etc.
 
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 \<*DEVICE*\>
 
@@ -160,4 +160,4 @@ more complex such as RAID, LVM, LUKS etc.
 
 # VERSION
 
-v1.1.6
+v1.4.0

docs/src/man/bootc-install-to-existing-root.md

@@ -7,21 +7,22 @@ bootc-install-to-existing-root - Install to the host root filesystem
 **bootc install to-existing-root** \[**\--replace**\]
 \[**\--source-imgref**\] \[**\--target-transport**\]
 \[**\--target-imgref**\] \[**\--enforce-container-sigpolicy**\]
-\[**\--skip-fetch-check**\] \[**\--run-fetch-check**\]
+\[**\--run-fetch-check**\] \[**\--skip-fetch-check**\]
+\[**\--disable-selinux**\] \[**\--karg**\]
 \[**\--root-ssh-authorized-keys**\] \[**\--generic-image**\]
 \[**\--bound-images**\] \[**\--stateroot**\]
-\[**\--acknowledge-destructive**\] \[**-h**\|**\--help**\]
-\[*ROOT_PATH*\]
+\[**\--acknowledge-destructive**\] \[**\--cleanup**\]
+\[**-h**\|**\--help**\] \[*ROOT_PATH*\]
 
 # DESCRIPTION
 
 Install to the host root filesystem.
 
 This is a variant of \`install to-filesystem\` that is designed to
 install \"alongside\" the running host root filesystem. Currently, the
-host root filesystems \`/boot\` partition will be wiped, but the content
-of the existing root will otherwise be retained, and will need to be
-cleaned up if desired when rebooted into the new root.
+host root filesystem\'s \`/boot\` partition will be wiped, but the
+content of the existing root will otherwise be retained, and will need
+to be cleaned up if desired when rebooted into the new root.
 
 # OPTIONS
 
@@ -47,8 +48,8 @@ cleaned up if desired when rebooted into the new root.
 
     By default, bootc install and install-to-filesystem assumes that it
     runs in a podman container, and it takes the container image to
-    install from the podmans container registry. If \--source-imgref is
-    given, bootc uses it as the installation source, instead of the
+    install from the podman\'s container registry. If \--source-imgref
+    is given, bootc uses it as the installation source, instead of the
     behaviour explained in the previous paragraph. See skopeo(1) for
     accepted formats.
 
@@ -68,16 +69,17 @@ cleaned up if desired when rebooted into the new root.
     Enabling this option enforces that \`/etc/containers/policy.json\`
     includes a default policy which requires signatures
 
-**\--skip-fetch-check (deprecated, see --run-fetch-check)**
-
-:   This is now the default and has no effect.
-
 **\--run-fetch-check**
 
-:   Verify the target image can be pulled using the bootc image.
+:   Verify the image can be fetched from the bootc image. Updates may
+    fail when the installation host is authenticated with the registry
+    but the pull secret is not in the bootc image
+
+**\--skip-fetch-check**
 
-    This will ensure the bootc system can be upgraded,
-    i.e. the registry credentials are available on the bootc image.
+:   Verify the image can be fetched from the bootc image. Updates may
+    fail when the installation host is authenticated with the registry
+    but the pull secret is not in the bootc image
 
 **\--disable-selinux**
 
@@ -119,11 +121,11 @@ cleaned up if desired when rebooted into the new root.
     \
     *Possible values:*
 
-    -   stored: Bound images must exist in the sources root container
+    -   stored: Bound images must exist in the source\'s root container
         storage (default)
 
     -   pull: Bound images will be pulled and stored directly in the
-        targets bootc container storage
+        target\'s bootc container storage
 
 **\--stateroot**=*STATEROOT*
 
@@ -133,9 +135,14 @@ cleaned up if desired when rebooted into the new root.
 
 :   Accept that this is a destructive action and skip a warning timer
 
+**\--cleanup**
+
+:   Add the bootc-destructive-cleanup systemd service to delete files
+    from the previous install on first boot
+
 **-h**, **\--help**
 
-:   Print help (see a summary with -h)
+:   Print help (see a summary with \'-h\')
 
 \[*ROOT_PATH*\] \[default: /target\]
 
@@ -145,4 +152,4 @@ cleaned up if desired when rebooted into the new root.
 
 # VERSION
 
-v1.1.6
+v1.4.0