make.config.in

# configuration file for BOUT++
# September 2008: Converted to use autoconf. Can be manually edited
# for the (very) rare occasions when autoconf fails

# extra compilation flags:
# -DCHECK=lvl  Enables a host of additional checks on each operation
#              such as uninitialised data if lvl is > 0. -DCHECK=3
#              enables all tests, while -DCHECK=0 disables them.
#              Helps when debugging
# -DTRACK      Keeps track of variable names.
#              Enables more useful error messages
# for SSE2: -msse2 -mfpmath=sse
# 
# This must also specify one or more file formats
# -DPDBF  PDB format (need to include pdb_format.cxx)
# -DNCDF  NetCDF format (nc_format.cxx)

# PETSc config variables need to be first, else they may clobber other
# options (e.g. CXX, CXXFLAGS)
PETSC_DIR ?= @PETSC_DIR@
PETSC_ARCH ?= @PETSC_ARCH@
@PETSC_MAKE_INCLUDE@
SLEPC_DIR ?= @SLEPC_DIR@
SLEPC_ARCH ?= @SLEPC_ARCH@
@SLEPC_MAKE_INCLUDE@

# These lines can be replaced in "make install" to point to install directories
# They are used in the CXXFLAGS variable below rather than hard-coding the directories
BOUT_INCLUDE_PATH=$(BOUT_TOP)/include
BOUT_LIB_PATH=$(BOUT_TOP)/lib
BOUT_CONFIG_FILE=$(BOUT_TOP)/make.config

prefix = @prefix@
exec_prefix = @exec_prefix@
datarootdir = @datarootdir@

# This path to the locale (.mo) files is hard-wired into bout++.cxx at compile time
BOUT_LOCALE_PATH=@localedir@

# Created this variable so that a user won't overwrite the CXXFLAGS variable
# on the command line, just add to this one
BOUT_FLAGS = $(CXXFLAGS) @CXXFLAGS@ @OPENMP_CXXFLAGS@ @COVERAGE_FLAGS@
#Use := here to force a "static" evaluation of the current state of BOUT_FLAGS to
#avoid infinite recursion that would arise if BOUT_FLAGS appeared on both sides of =
BOUT_FLAGS := $(BOUT_FLAGS) -DBOUT_FLAGS_STRING="$(BOUT_FLAGS)"

# Specify the MPI C++ compiler in CXX

CXX		= @CXX@
CC      = $(CXX)

AR		= ar
ARFLAGS = @ARFLAGS@
RANLIB	= @RANLIB@
MKDIR	= @MKDIR_P@

####################################################################
# Do not need to alter anything below
####################################################################

LD       = $(CXX)
LDFLAGS  = @LDFLAGS@
LIBS     = @LIBS@
CPPFLAGS = @CPPFLAGS@

####################################################################
# Extra (optional) source files, includes and libs
# NOTE: EXTRA_SRC must include a solver (solver.cxx or ida_solver.cxx)
#       and a file format (nc_format.cxx or pdb_format.cxx)
####################################################################

EXTRA_INCS	  = $(CPPFLAGS) @EXTRA_INCS@
EXTRA_LIBS	  = $(LIBS) @EXTRA_LIBS@ @OPENMP_CXXFLAGS@

PRECON_SOURCE = @PRECON_SOURCE@

BOUT_VERSION  = @PACKAGE_VERSION@

####################################################################
# These are used for compiling physics modules using BOUT++ library
####################################################################

# Files that are needed by configure and should be dependencies for 'all'

OBJ    = $(SOURCEC:%.cxx=%.o)
ifndef RELEASED
# If this is part of an packaged and installed installation, the user cannot
# write these files, so they shouldn't be changed. Thus only set this, in
# the non installed case.
LIB_A  = $(BOUT_LIB_PATH)/libbout++.a
LIB_SO = $(BOUT_LIB_PATH)/libbout++.so
LIB    = @LIB_TO_BUILD@
endif

MPARK_VARIANT_INCLUDE_PATH=@MPARK_VARIANT_INCLUDE_PATH@
FMT_INCLUDE_PATH=@FMT_INCLUDE_PATH@
BOUT_INCLUDE = -I$(BOUT_INCLUDE_PATH) $(CXXINCLUDE) $(EXTRA_INCS) @MPARK_INCLUDE@ -I$(FMT_INCLUDE_PATH)
BOUT_LIBS    = -lm -L$(BOUT_LIB_PATH) -lbout++ $(EXTRA_LIBS)

CHANGED = $(shell find -f $(BOUT_TOP)/include $(BOUT_TOP)/src -type f \( -name \*.cxx -or -name \*.h \) -newer $(LIB) -print 2> /dev/null)

# This will set a default if no TARGET is provided
TARGET				?= $(SOURCEC:%.cxx=%)

####################################################################
# Definining stuff for recursive make
####################################################################

# Phony targets since they are directory names
.PHONY: $(DIRS) lib install libfast runtest manual sphinx doxygen

ifneq ("$(TARGET)","libfast")
all: $(BOUT_CONFIG_FILE) $(DIRS) $(TARGET)
else
all: $(BOUT_TOP)/config.status $(BOUT_CONFIG_FILE) $(DIRS)
endif
libfast: $(BOUT_CONFIG_FILE) $(DIRS)

####################################################################
# Recursively run make through subdirs
####################################################################

ifeq ("$(TARGET)" , "lib")
$(DIRS):
# make $@ slowly using the old method where parallel builds can cause
# race conditions that 
	@$(MAKE) -s --no-print-directory TARGET=lib -C $@ all
else
ifeq ("$(TARGET)","libfast")
$(DIRS):
# make $@ using the libfast method, where all .o files
# are only created in the end
	@$(MAKE) -s --no-print-directory TARGET=$(TARGET) -C $@ $(TARGET)
else
MODULE_DIR?=$(shell pwd)
$(DIRS):
# MODULE_DIR: pass the module directory, where the libraries should be
# created.
# SUB_NAME is used for creating a library with the expected name.
# first a potential trailing slash is removed, and after that the
# directory name is extracted. This allows to e.g. specify a directory
# as fuu/bar/ and still get an archive named bar.a
	@$(MAKE) -s --no-print-directory MODULE_DIR=$(MODULE_DIR) SUB_NAME=$(shell basename $@) TARGET=sub -C $@
endif
endif

# Create 'lib' and 'include' incase they don't exist
$(BOUT_TOP)/include $(BOUT_TOP)/lib:
	$(MKDIR) $@

####################################################################
# Install header files and libraries
####################################################################

INSTALL = @INSTALL@
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644

INSTALL_INCLUDE_PATH = $(DESTDIR)@includedir@/bout++/

# A list of relative paths e.g. "fr/LC_MESSAGES/libbout.mo zh_CN/LC_MESSAGES/libbout.mo"
MO_FILES = $(shell cd locale; ls */LC_MESSAGES/libbout.mo)

install: libfast
	$(PRE_INSTALL)     # Pre-install commands follow.

	$(NORMAL_INSTALL)  # Normal commands follow.
	$(MKDIR) $(INSTALL_INCLUDE_PATH)/{,pvode,bout/sys,bout/invert}
	$(MKDIR) $(DESTDIR)/{@libdir@,@bindir@,@datadir@/bout++/idllib}
	$(MKDIR) $(DESTDIR)/@datadir@/bout++/pylib/{boutdata,boututils}
	$(INSTALL_DATA) include/*.hxx $(INSTALL_INCLUDE_PATH)
ifeq ("@OWN_MPARK@", "yes")
	$(MKDIR) $(INSTALL_INCLUDE_PATH)/mpark
	$(INSTALL_DATA) $(MPARK_VARIANT_INCLUDE_PATH)/mpark/*.hpp $(INSTALL_INCLUDE_PATH)/mpark
endif
	$(INSTALL_DATA) $(FMT_INCLUDE_PATH)/fmt/*.h $(INSTALL_INCLUDE_PATH)/fmt
	$(INSTALL_DATA) include/pvode/*.h $(INSTALL_INCLUDE_PATH)/pvode/
	$(INSTALL_DATA) include/bout/*.hxx $(INSTALL_INCLUDE_PATH)/bout/
	$(INSTALL_DATA) include/bout/sys/*.hxx $(INSTALL_INCLUDE_PATH)/bout/sys/
	$(INSTALL_DATA) include/bout/invert/*.hxx $(INSTALL_INCLUDE_PATH)/bout/invert/
	$(INSTALL_DATA) lib/libbout++.a $(DESTDIR)@libdir@
	$(INSTALL_DATA) lib/libpvode.a $(DESTDIR)@libdir@
	$(INSTALL_DATA) lib/libpvpre.a $(DESTDIR)@libdir@
ifneq ("@SHARED_EXTRA@x", "x")
	$(INSTALL_PROGRAM) lib/libbout++.so.$(SONAME) $(DESTDIR)@libdir@
	$(INSTALL_PROGRAM) lib/libpvode.so.* $(DESTDIR)@libdir@
	$(INSTALL_PROGRAM) lib/libpvpre.so.* $(DESTDIR)@libdir@
	rm -f $(DESTDIR)@libdir@/lib{bout++,pvode,pvpre}.so
	ln -s libbout++.so.$(SONAME) $(DESTDIR)@libdir@/libbout++.so
	ln -s libpvode.so.1.0.0 $(DESTDIR)@libdir@/libpvode.so
	ln -s libpvpre.so.1.0.0 $(DESTDIR)@libdir@/libpvpre.so
endif
	$(INSTALL_PROGRAM)  bin/bout-config $(DESTDIR)@bindir@
	$(INSTALL_PROGRAM)  bin/bout-log-color $(DESTDIR)@bindir@
	$(INSTALL_DATA)  tools/idllib/*.pro $(DESTDIR)@datadir@/bout++/idllib/
	$(INSTALL_DATA)  tools/idllib/README $(DESTDIR)@datadir@/bout++/idllib/
	$(INSTALL_DATA)  tools/pylib/boutdata/*.py $(DESTDIR)@datadir@/bout++/pylib/boutdata/
	$(INSTALL_DATA)  tools/pylib/boututils/*.py $(DESTDIR)@datadir@/bout++/pylib/boututils/
	$(INSTALL_DATA)  make.config $(INSTALL_INCLUDE_PATH)
	for mo in $(MO_FILES); do $(MKDIR) $(DESTDIR)@localedir@/`dirname $$mo`; $(INSTALL_DATA) locale/$$mo $(DESTDIR)@localedir@/$$mo; done
	$(POST_INSTALL)    # Post-install commands follow.

	@# Modify paths in the bout-config script 
	sed -i "s|^BOUT_INCLUDE_PATH=.*|BOUT_INCLUDE_PATH=@includedir@/bout++|" $(DESTDIR)@bindir@/bout-config 
	sed -i "s|^BOUT_LIB_PATH=.*|BOUT_LIB_PATH=@libdir@|" $(DESTDIR)@bindir@/bout-config
	sed -i "s|^BOUT_CONFIG_FILE=.*|BOUT_CONFIG_FILE=@includedir@/bout++/make.config|" $(DESTDIR)@bindir@/bout-config
	sed -i "s|^idlpath=.*|idlpath=@datadir@/bout++/idllib/|" $(DESTDIR)@bindir@/bout-config
	sed -i "s|^pythonpath=.*|pythonpath=@datadir@/bout++/pylib/|" $(DESTDIR)@bindir@/bout-config
ifeq ("@OWN_MPARK@", "yes")
	sed -i "s|^MPARK_VARIANT_INCLUDE_PATH=.*|MPARK_VARIANT_INCLUDE_PATH=@includedir@/bout++|" $(DESTDIR)@bindir@/bout-config
endif
	sed -i "s|^FMT_INCLUDE_PATH=.*|FMT_INCLUDE_PATH=@includedir@/bout++|" $(DESTDIR)@bindir@/bout-config

	@# Modify paths in the make.config file
	sed -i "s|^BOUT_INCLUDE_PATH=.*|BOUT_INCLUDE_PATH=@includedir@/bout++|" $(INSTALL_INCLUDE_PATH)/make.config
	sed -i "s|^BOUT_LIB_PATH=.*|BOUT_LIB_PATH=@libdir@|" $(INSTALL_INCLUDE_PATH)/make.config
	sed -i "s|^BOUT_CONFIG_FILE=.*|BOUT_CONFIG_FILE=@includedir@/bout++/make.config|" $(INSTALL_INCLUDE_PATH)/make.config
ifeq ("@OWN_MPARK@", "yes")
	sed -i "s|^MPARK_VARIANT_INCLUDE_PATH=.*|MPARK_VARIANT_INCLUDE_PATH=@includedir@/bout++|" $(INSTALL_INCLUDE_PATH)/make.config
endif
	sed -i "s|^FMT_INCLUDE_PATH=.*|FMT_INCLUDE_PATH=@includedir@/bout++|" $(INSTALL_INCLUDE_PATH)/make.config

#	Set the make.config as released, so the library isn't rebuild. This way the .a file doesn't need to be preserved/installed
	sed -i '26 i RELEASED                 = yes' $(INSTALL_INCLUDE_PATH)/make.config

uninstall:
	$(PRE_UNINSTALL)     # Pre-uninstall commands follow.

	$(NORMAL_UNINSTALL)  # Normal commands follow.
	$(RM) -r $(DESTDIR)@datadir@/bout++/pylib/boututils/
	$(RM) -r $(DESTDIR)@datadir@/bout++/pylib/boutdata/
	$(RM) -r $(DESTDIR)@datadir@/bout++/idllib/
	$(RM) $(DESTDIR)@bindir@/bout-config
	$(RM) $(DESTDIR)@bindir@/bout-log-color
	$(RM) $(DESTDIR)@libdir@/libbout++.a
	$(RM) $(DESTDIR)@libdir@/libpvode.a
	$(RM) $(DESTDIR)@libdir@/libpvpre.a
	$(RM) -r  $(DESTDIR)@includedir@/bout++/
	$(RM) $(DESTDIR)@localedir@/*/LC_MESSAGES/libbout.mo

	$(POST_UNINSTALL)    # Post-uninstall commands follow.

####################################################################
# Builds the library with $(OBJ) which is defined from the SOURCEC variable
####################################################################

# Rules for downloading submodules
-include $(BOUT_TOP)/makefile.submodules

ifeq ("$(TARGET)", "libfast")
libfast: makefile $(BOUT_CONFIG_FILE) $(BOUT_TOP)/include $(OBJ) $(DIRS)
endif

ifeq ("$(TARGET)", "lib")
lib: makefile $(BOUT_CONFIG_FILE) $(BOUT_TOP)/include $(BOUT_TOP)/lib $(OBJ)
ifneq ("$(OBJ)foo", "foo")
	@echo "  Adding $(OBJ) to libbout++.a"
	@$(AR) $(ARFLAGS) $(LIB_A) $(OBJ)
	@$(RANLIB) $(LIB)
endif
endif


ifeq ("$(TARGET)", "sub")
LIB=$(MODULE_DIR)/$(SUB_NAME).a
sub:$(LIB)

$(LIB): makefile $(BOUT_CONFIG_FILE) $(BOUT_TOP)/include $(BOUT_TOP)/lib $(OBJ)
ifneq ("$(OBJ)foo", "foo")
	@echo "  Adding $(OBJ) to $(LIB)"
	@LIBT=$(LIB).$$$$.a && \
		$(AR) $(ARFLAGS) $${LIBT} $(OBJ) && \
		$(RANLIB) $${LIBT} && \
		mv $${LIBT} $(LIB)
endif
endif

runtest:
	./runtest


ifneq ("$(TARGET)", "sub")
ifneq ("$(TARGET)", "libfast")
ifneq ("$(TARGET)", "lib")
ifneq ("$(TARGET)", "runtest")

####################################################################
# Make libbout++.a if it doesn't exist with the checklib target
####################################################################
libbout++.a:
	@echo "Rebuilding out-of-date bout++ library"
	@$(MAKE) --no-print-directory -C $(BOUT_TOP)
 
####################################################################
# Make the target (e.g. gas_compress)
####################################################################
# first we remove a trailing slash, if present. Note that currently we
# dont support several trailing slashes, as in fuu/bar/// 
DIRS_=$(DIRS:%/=%)
# then we extract the directory name, in case it is a longer path
# We are not in a recipe, so # needs to be escaped
# $$ is an escaped $
DIRS__=$(shell for d in $(DIRS_) ; do basename $$d;done)
# now we can generate a list of libraries
SUB_LIBS=$(DIRS__:%=%.a)
$(SUB_LIBS):$(DIRS__)

$(SOURCEC): checklib
$(SOURCEC:%.cxx=%.o): $(LIB)
$(TARGET): | $(DIRS)
$(TARGET): makefile $(BOUT_CONFIG_FILE) $(OBJ) $(SUB_LIBS)
	@echo "  Linking" $(TARGET)
	@$(LD) -o $(TARGET) $(OBJ) $(SUB_LIBS) $(BOUT_LIBS) $(LDFLAGS)

checklib:
ifneq ("$(CHANGED)foo", "foo")
	@echo "Rebuilding out-of-date bout++ library"
	@$(MAKE) --no-print-directory -C $(BOUT_TOP)
endif

endif
endif
endif
endif

# Ignore missing requirement files
-include .*.mk

# If it is a libfast target, track changes to rebuild library if needed
#
# Further track dependencies using gcc's -M feature:
# -MF  write the generated dependency rule to a file
# -MG  assume missing headers will be generated and don't stop with an error
# -MM  generate dependency rule for prerequisite, skipping system headers
# -MP  add phony target for each header to prevent errors when header is missing
# -MT  add a target to the generated dependency
# Ignore failure, in case some compiler does not support this
%.o: $(BOUT_CONFIG_FILE) %.cxx
	@echo "  Compiling " $(@:.o=.cxx)
	@$(CXX) $(BOUT_INCLUDE) $(BOUT_FLAGS) -c $(@:.o=.cxx) -o $@
ifeq ("$(TARGET)","libfast")
	@test "$@" = "bout++-time.o" || touch $(BOUT_TOP)/lib/.last.o.file
endif

####################################################################
# Clean target. Pretty self explanatory.
# NOTE: See that double colon (::) below? That's signifies a rule that can be added to later
# See:
# http://owen.sj.ca.us/~rk/howto/slides/make/slides/makecolon.html
####################################################################

clean::
	-@$(RM) -rf $(OBJ) $(DEPS) $(TARGET)
	@for pp in $(DIRS) $(DIRS_CLEAN); do echo "  " cleaning $$pp; $(MAKE) --no-print-directory -C $$pp clean; done
	@$(RM) -f $(SUB_LIBS)
	-@$(RM) .*.mk
	@test -f make.config && ( find src | grep '\.o$$' && echo "WARNING: Some object files remain - which might cause issues. Clean with $(MAKE) clean-remove-object-files" ) || exit 0

clean-remove-object-files:
	find src|grep '\.o$$' | xargs rm


distclean:: clean clean-tests
	@echo include cleaned
# Removing the externalpackage installation. When we have more packages, need a better way
	@$(RM) -rf $(BOUT_TOP)/include/pvode
	@echo lib cleaned
	@$(RM) -rf $(BOUT_TOP)/lib/*
	-@$(RM) $(BOUT_TOP)/externalpackages/PVODE/lib/*.a
	-@$(RM) $(BOUT_TOP)/externalpackages/PVODE/source/obj/*.o
	-@$(RM) $(BOUT_TOP)/externalpackages/PVODE/precon/obj/*.o
	-@$(RM) -rf $(BOUT_TOP)/autom4te.cache make.config
	@echo externalpackages cleaned
	@touch $(BOUT_TOP)/configure
	@echo autom4te.cache cleaned
	-@$(RM) $(BOUT_TOP)/include/bout/version.hxx
	-@$(RM) $(BOUT_TOP)/include/bout/revision.hxx
	-@$(RM) $(BOUT_TOP)/include/bout/build_defines.hxx
	@echo generated version headers cleaned
	-@$(RM) $(BOUT_TOP)/tools/pylib/boutconfig/__init__.py
	@echo generated Python boutconfig module cleaned

clean-tests: clean-unit-tests clean-integrated-tests clean-mms-tests

clean-unit-tests:
	@echo "   tests/unit cleaned"
	@$(MAKE) --no-print-directory -C tests/unit clean

clean-integrated-tests:
	@echo "   tests/integrated cleaned"
	@$(MAKE) --no-print-directory -C tests/integrated clean

clean-mms-tests:
	@echo "   tests/MMS cleaned"
	@$(MAKE) --no-print-directory -C tests/MMS clean

####################################################################
# Documentation
####################################################################

MANUAL_DIR=$(BOUT_TOP)/manual

doxygen:
	$(MAKE) -C $(MANUAL_DIR) doxygen

breathe-autogen:
	$(MAKE) -C $(MANUAL_DIR) breathe_autogen

sphinx-docs-html:
	$(MAKE) -C $(MANUAL_DIR) sphinx-html

sphinx-docs-latex:
	$(MAKE) -C $(MANUAL_DIR) sphinx-pdf

manual:
	$(MAKE) -C $(MANUAL_DIR)

manual-html:
	$(MAKE) -C $(MANUAL_DIR) html

manual-pdf:
	$(MAKE) -C $(MANUAL_DIR) pdf

python: libfast
	$(MAKE) -C tools/pylib python3

python2: libfast
	$(MAKE) -C tools/pylib python2

python-all:python python2

######################################################################
# Code coverage
######################################################################

GCOV = @GCOV@
LCOV = @LCOV@
GENHTML = @GENHTML@
abs_builddir = @abs_builddir@

@CODE_COVERAGE_RULES@