Skip to content

Latest commit

 

History

History
425 lines (349 loc) · 24.3 KB

flow_control.md

File metadata and controls

425 lines (349 loc) · 24.3 KB
Raw

Overview

Flow control in Envoy is done by having limits on each buffer, and watermark callbacks. When a buffer contains more data than the configured limit, the high watermark callback will fire, kicking off a chain of events which eventually informs the data source to stop sending data. This back-off may be immediate (stop reading from a socket) or gradual (stop HTTP/2 window updates) so all buffer limits in Envoy are considered soft limits. When the buffer eventually drains (generally to half of the high watermark to avoid thrashing back and forth) the low watermark callback will fire, informing the sender it can resume sending data.

TCP implementation details

Flow control for TCP and TCP-with-TLS-termination are handled by coordination between the Network::ConnectionImpl write buffer, and the Network::TcpProxy filter.

The downstream flow control goes as follows.

  • The downstream Network::ConnectionImpl::write_buffer_ buffers too much data. It calls Network::ConnectionCallbacks::onAboveWriteBufferHighWatermark().
  • The Network::TcpProxy::DownstreamCallbacks receives onAboveWriteBufferHighWatermark() and calls readDisable(true) on the upstream connection.
  • When the downstream buffer is drained, it calls Network::ConnectionCallbacks::onBelowWriteBufferLowWatermark()
  • The Network::TcpProxy::DownstreamCallbacks receives onBelowWriteBufferLowWatermark() and calls readDisable(false) on the upstream connection.

Flow control for the upstream path is much the same.

  • The upstream Network::ConnectionImpl::write_buffer_ buffers too much data. It calls Network::ConnectionCallbacks::onAboveWriteBufferHighWatermark().
  • The Network::TcpProxy::UpstreamCallbacks receives onAboveWriteBufferHighWatermark() and calls readDisable(true) on the downstream connection.
  • When the upstream buffer is drained, it calls Network::ConnectionCallbacks::onBelowWriteBufferLowWatermark()
  • The Network::TcpProxy::UpstreamCallbacks receives onBelowWriteBufferLowWatermark() and calls readDisable(false) on the downstream connection.

HTTP2 implementation details

Because the various buffers in the HTTP/2 stack are fairly complicated, each path from a buffer going over the watermark limit to disabling data from the data source is documented separately.

HTTP2 data flow diagram

For HTTP/2, when filters, streams, or connections back up, the end result is readDisable(true) being called on the source stream. This results in the stream ceasing to consume window, and so not sending further flow control window updates to the peer. This will result in the peer eventually stopping sending data when the available window is consumed (or nghttp2 closing the connection if the peer violates the flow control limit) and so limiting the amount of data Envoy will buffer for each stream. When readDisable(false) is called, any outstanding unconsumed data is immediately consumed, which results in resuming window updates to the peer and the resumption of data.

Note that readDisable(true) on a stream may be called by multiple entities. It is called when any filter buffers too much, when the stream backs up and has too much data buffered, or the connection has too much data buffered. Because of this, readDisable() maintains a count of the number of times it has been called to both enable and disable the stream, resuming reads when each caller has called the equivalent low watermark callback. For example, if the TCP window upstream fills up and results in the network buffer backing up, all the streams associated with that connection will readDisable(true) their downstream data sources. When the HTTP/2 flow control window fills up an individual stream may use all of the window available and call a second readDisable(true) on its downstream data source. When the upstream TCP socket drains, the connection will go below its low watermark and each stream will call readDisable(false) to resume the flow of data. The stream which had both a network level block and a H2 flow control block will still not be fully enabled. Once the upstream peer sends window updates, the stream buffer will drain and the second readDisable(false) will be called on the downstream data source, which will finally result in data flowing from downstream again.

The two main parties involved in flow control are the router filter (Envoy::Router::Filter) and the connection manager (Envoy::Http::ConnectionManagerImpl). The router is responsible for intercepting watermark events for its own buffers, the individual upstream streams (if codec buffers fill up) and the upstream connection (if the network buffer fills up). It passes any events to the connection manager, which has the ability to call readDisable() to enable and disable further data from downstream. On the reverse path, when the downstream connection backs up, the connection manager collects events for the downstream streams and the downstream connection. It passes events to the router filter via Envoy::Http::DownstreamWatermarkCallbacks and the router can then call readDisable() on the upstream stream. Filters opt into subscribing to DownstreamWatermarkCallbacks as a performance optimization to avoid each watermark event on a downstream HTTP/2 connection resulting in "number of streams * number of filters" callbacks. Instead, only the router filter is notified and only the "number of streams" multiplier applies. Because the router filter only subscribes to notifications when it has an upstream connection, the connection manager tracks how many outstanding high watermark events have occurred and passes any on to the router filter when it subscribes.

It is worth noting that the router does not unwind readDisable(true) calls on destruction. In the case of HTTP/2 the Envoy::Http::Http2::ConnectionImpl will consume any outstanding flow control window on stream deletion to avoid leaking the connection-level window. In the case of HTTP/1, the Envoy::Http::ConnectionManagerImpl unwinds any readDisable() calls downstream to ensure that pipelined requests will be read. For HTTP/1 upstream connections, the readDisable(true) calls are unwound in ClientConnectionImpl::onMessageComplete() to make sure that as connections are returned to the connection pool they are ready to read.

HTTP/2 codec recv buffer

Given the HTTP/2 Envoy::Http::Http2::ConnectionImpl::StreamImpl::pending_recv_data_ is processed immediately there's no real need for buffer limits, but for consistency and to future-proof the implementation, it is a WatermarkBuffer. The high watermark path goes as follows:

  • When pending_recv_data_ has too much data it calls ConnectionImpl::StreamImpl::pendingRecvBufferHighWatermark().
  • pendingRecvBufferHighWatermark calls readDisable(true) on the stream.

The low watermark path is similar

  • When pending_recv_data_ is drained, it calls ConnectionImpl::StreamImpl::pendingRecvBufferLowWatermark.
  • pendingRecvBufferLowWatermarkwhich calls readDisable(false) on the stream.

HTTP/1 and HTTP/2 filters

Each HTTP and HTTP/2 filter has an opportunity to call decoderBufferLimit() or encoderBufferLimit() on creation. No filter should buffer more than the configured bytes without calling the appropriate watermark callbacks or sending an error response.

Filters may override the default limit with calls to setDecoderBufferLimit() and setEncoderBufferLimit(). These limits are applied as filters are created so filters later in the chain can override the limits set by prior filters.

Most filters do not buffer internally, but instead push back on data by returning a FilterDataStatus on encodeData()/decodeData() calls. If a buffer is a streaming buffer, i.e. the buffered data will resolve over time, it should return FilterDataStatus::StopIterationAndWatermark to pause further data processing, which will cause the ConnectionManagerImpl to trigger watermark callbacks on behalf of the filter. If a filter can not make forward progress without the complete body, it should return FilterDataStatus::StopIterationAndBuffer. in this case if the ConnectionManagerImpl buffers more than the allowed data it will return an error downstream: a 413 on the request path, 500 or resetStream() on the response path.

Decoder filters

For filters which do their own internal buffering, filters buffering more than the buffer limit should call onDecoderFilterAboveWriteBufferHighWatermark if they are streaming filters, i.e. filters which can process more bytes as the underlying buffer is drained. This causes the downstream stream to be readDisabled and the flow of downstream data to be halted. The filter is then responsible for calling onDecoderFilterBelowWriteBufferLowWatermark when the buffer is drained to resume the flow of data.

Decoder filters which must buffer the full response should respond with a 413 (Payload Too Large) when encountering a response body too large to buffer.

The decoder high watermark path for streaming filters is as follows:

  • When an instance of Envoy::Router::StreamDecoderFilter buffers too much data it should call StreamDecoderFilterCallback::onDecoderFilterAboveWriteBufferHighWatermark().
  • When Envoy::Http::ConnectionManagerImpl::ActiveStreamDecoderFilter receives onDecoderFilterAboveWriteBufferHighWatermark() it calls readDisable(true) on the downstream stream to pause data.

And the low watermark path:

  • When the buffer of the Envoy::Router::StreamDecoderFilter drains should call StreamDecoderFilterCallback::onDecoderFilterBelowWriteBufferLowWatermark().
  • When Envoy::Http::ConnectionManagerImpl receives onDecoderFilterAboveWriteBufferHighWatermark() it calls readDisable(false) on the downstream stream to pause data.

Encoder filters

Encoder filters buffering more than the buffer limit should call onEncoderFilterAboveWriteBufferHighWatermark if they are streaming filters, i.e. filters which can process more bytes as the underlying buffer is drained. The high watermark call will be passed from the Envoy::Http::ConnectionManagerImpl to the Envoy::Router::Filter which will readDisable(true) to stop the flow of upstream data. Streaming filters which call onEncoderFilterAboveWriteBufferHighWatermark should call onEncoderFilterBelowWriteBufferLowWatermark when the underlying buffer drains.

Filters which must buffer a full request body before processing further, should respond with a 500 (Server Error) if encountering a request body which is larger than the buffer limits.

The encoder high watermark path for streaming filters is as follows:

  • When an instance of Envoy::Router::StreamEncoderFilter buffers too much data it should call StreamEncoderFilterCallback::onEncodeFilterAboveWriteBufferHighWatermark().
  • When Envoy::Http::ConnectionManagerImpl::ActiveStreamEncoderFilter receives onEncoderFilterAboveWriteBufferHighWatermark() it calls ConnectionManagerImpl::ActiveStream::callHighWatermarkCallbacks()
  • callHighWatermarkCallbacks() then in turn calls DownstreamWatermarkCallbacks::onAboveWriteBufferHighWatermark() for all filters which registered to receive watermark events
  • Envoy::Router::Filter receives onAboveWriteBufferHighWatermark() and calls readDisable(false) on the upstream request.

The encoder low watermark path for streaming filters is as follows:

  • When an instance of Envoy::Router::StreamEncoderFilter buffers too much data it should call StreamEncoderFilterCallback::onEncodeFilterBelowWriteBufferLowWatermark().
  • When Envoy::Http::ConnectionManagerImpl::ActiveStreamEncoderFilter receives onEncoderFilterBelowWriteBufferLowWatermark() it calls ConnectionManagerImpl::ActiveStream::callLowWatermarkCallbacks()
  • callLowWatermarkCallbacks() then in turn calls DownstreamWatermarkCallbacks::onBelowWriteBufferLowWatermark() for all filters which registered to receive watermark events
  • Envoy::Router::Filter receives onBelowWriteBufferLowWatermark() and calls readDisable(true) on the upstream request.

HTTP and HTTP/2 codec upstream send buffer

The upstream send buffer Envoy::Http::Http2::ConnectionImpl::StreamImpl::pending_send_data_ is H2 stream data destined for an Envoy backend. Data is added to this buffer after each filter in the chain is done processing, and it backs up if there is insufficient connection or stream window to send the data. The high watermark path goes as follows:

  • When pending_send_data_ has too much data it calls ConnectionImpl::StreamImpl::pendingSendBufferHighWatermark().
  • pendingSendBufferHighWatermark() calls StreamCallbackHelper::runHighWatermarkCallbacks()
  • runHighWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallbacks receiving an onAboveWriteBufferHighWatermark() callback.
  • When Envoy::Router::Filter receives onAboveWriteBufferHighWatermark() it calls StreamDecoderFilterCallback::onDecoderFilterAboveWriteBufferHighWatermark().
  • When Envoy::Http::ConnectionManagerImpl receives onDecoderFilterAboveWriteBufferHighWatermark() it calls readDisable(true) on the downstream stream to pause data.

For the low watermark path:

  • When pending_send_data_ drains it calls ConnectionImpl::StreamImpl::pendingSendBufferLowWatermark()
  • pendingSendBufferLowWatermark() calls StreamCallbackHelper::runLowWatermarkCallbacks()
  • runLowWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallbacks receiving a onBelowWriteBufferLowWatermark() callback.
  • When Envoy::Router::Filter receives onBelowWriteBufferLowWatermark() it calls StreamDecoderFilterCallback::onDecoderFilterBelowWriteBufferLowWatermark().
  • When Envoy::Http::ConnectionManagerImpl receives onDecoderFilterBelowWriteBufferLowWatermark() it calls readDisable(false) on the downstream stream to resume data.

HTTP and HTTP/2 network upstream network buffer

The upstream network buffer is HTTP/2 data for all streams destined for the Envoy backend. If the network buffer fills up, all streams associated with the underlying TCP connection will be informed of the back-up, and the data sources (HTTP/2 streams or HTTP connections) feeding into those streams will be readDisabled.

The high watermark path is as follows:

  • When Envoy::Network::ConnectionImpl::write_buffer_ has too much data it calls Network::ConnectionCallbacks::onAboveWriteBufferHighWatermark().
  • When Envoy::Http::CodecClient receives onAboveWriteBufferHighWatermark() it calls onUnderlyingConnectionAboveWriteBufferHighWatermark() on codec_.
  • When Envoy::Http::ConnectionManagerImpl receives onAboveWriteBufferHighWatermark() it calls runHighWatermarkCallbacks() for each stream of the connection.
  • runHighWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallback receiving an onAboveWriteBufferHighWatermark() callback.
  • When Envoy::Router::Filter receives onAboveWriteBufferHighWatermark() it calls StreamDecoderFilterCallback::onDecoderFilterAboveWriteBufferHighWatermark().
  • When Envoy::Http::ConnectionManagerImpl receives onDecoderFilterAboveWriteBufferHighWatermark() it calls readDisable(true) on the downstream stream to pause data.

The low watermark path is as follows:

  • When Envoy::Network::ConnectionImpl::write_buffer_ is drained it calls Network::ConnectionCallbacks::onBelowWriteBufferLowWatermark().
  • When Envoy::Http::CodecClient receives onBelowWriteBufferLowWatermark() it calls onUnderlyingConnectionBelowWriteBufferLowWatermark() on codec_.
  • When Envoy::Http::ConnectionManagerImpl receives onBelowWriteBufferLowWatermark() it calls runLowWatermarkCallbacks() for each stream of the connection.
  • runLowWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallback receiving a onBelowWriteBufferLowWatermark() callback.
  • When Envoy::Router::Filter receives onBelowWriteBufferLowWatermark() it calls StreamDecoderFilterCallback::onDecoderFilterBelowWriteBufferLowWatermark().
  • When Envoy::Http::ConnectionManagerImpl receives onDecoderFilterBelowWriteBufferLowWatermark() it calls readDisable(false) on the downstream stream to resume data.

As with the downstream network buffer, it is important that as new upstream streams are associated with an existing upstream connection over its buffer limits that the new streams are created in the correct state. To handle this, the Envoy::Http::Http2::ClientConnectionImpl tracks the state of the underlying Network::Connection in underlying_connection_above_watermark_. If a new stream is created when the connection is above the high watermark the new stream has runHighWatermarkCallbacks() called on it immediately.

HTTP/2 codec downstream send buffer

On filter creation, all filters have the opportunity to subscribe to downstream watermark events sent by the connection manager, and the router filter takes advantage of this. When a particular downstream stream gets backed up, the router filter gets notified and can then readDisable() the upstream data source. The high watermark path is as follows:

  • When ConnectionImpl::StreamImpl::pending_send_data_ has too much data, it calls ConnectionImpl::StreamImpl::pendingSendBufferHighWatermark()
  • pendingSendBufferHighWatermark() calls StreamCallbackHelper::runHighWatermarkCallbacks()
  • runHighWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallbacks receiving an onAboveWriteBufferHighWatermark() callback. Currently, ConnectionManagerImpl::ActiveStream is the only subscriber.
  • ConnectionManagerImpl::ActiveStream::onAboveWriteBufferHighWatermark() calls ConnectionManagerImpl::ActiveStream::callHighWatermarkCallbacks()
  • callHighWatermarkCallbacks() then in turn calls DownstreamWatermarkCallbacks::onAboveWriteBufferHighWatermark() for all filters which registered to receive watermark events
  • Envoy::Router::Filter receives onAboveWriteBufferHighWatermark() and calls readDisable(true) on the upstream request.

The low watermark path is as follows:

  • When ConnectionImpl::StreamImpl::pending_send_data_ drains, it calls ConnectionImpl::StreamImpl::pendingSendBufferLowWatermark().
  • pendingSendBufferLowWatermark() calls StreamCallbackHelper::runLowWatermarkCallbacks()
  • runLowWatermarkCallbacks() results in all subscribers of Envoy::Http::StreamCallbacks receiving an onBelowWriteBufferLowWatermark() callback.
  • ConnectionManagerImpl::ActiveStream::onBelowWriteBufferLowWatermark() calls ConnectionManagerImpl::ActiveStream::callLowWatermarkCallbacks()
  • callLowWatermarkCallbacks() then in turn calls DownstreamWatermarkCallbacks::onBelowWriteBufferLowWatermark() for all filters which registered to receive watermark events.
  • Envoy::Router::Filter receives onBelowWriteBufferLowWatermark() and calls readDisable(false) on the upstream request.

HTTP/2 network downstream network buffer

When a downstream network connection buffers too much data, it informs the connection manager which passes the high watermark event to all of the streams on the connection. They pass the watermark event to the router, which calls readDisable() on the upstream streams.

The high watermark path is as follows:

  • The downstream Network::ConnectionImpl::write_buffer_ buffers too much data. It calls Network::ConnectionCallbacks::onAboveWriteBufferHighWatermark().
  • Envoy::Http::Http2::ConnectionManagerImpl::onAboveWriteBufferHighWatermark() calls ConnectionImpl::onUnderlyingConnectionAboveWriteBufferHighWatermark() on codec_.
  • When Envoy::Http::Http2::ConnectionImpl receives onAboveWriteBufferHighWatermark() it calls runHighWatermarkCallbacks() for each stream of the connection.
  • When ConnectionManagerImpl::ActiveStream::onAboveWriteBufferHighWatermark() is called it calls ConnectionImpl::ActiveStream::callHighWatermarkCallbacks() From this point on, the flow is the same as when the downstream codec buffer goes over its high watermark.

The low watermark path is as follows:

  • The downstream Network::ConnectionImpl::write_buffer_ drains. It calls Network::ConnectionCallbacks::onBelowWriteBufferLowWatermark().
  • Envoy::Http::Http2::ConnectionManagerImpl::onBelowWriteBufferLowWatermark() calls ConnectionImpl::onUnderlyingConnectionBelowWriteBufferLowWatermark() on codec_.
  • When Envoy::Http::Http2::ConnectionImpl receives onBelowWriteBufferLowWatermark() it calls runLowWatermarkCallbacks() for each stream of the connection.
  • When ConnectionManagerImpl::ActiveStream::onBelowWriteBufferLowWatermark() is called it calls ConnectionImpl::ActiveStream::callLowWatermarkCallbacks()

From this point on, the flow is the same as when the downstream codec buffer goes under its low watermark.

When the downstream buffer is overrun each new stream should be informed of this on stream creation. This is handled by the connection manager latching the state of the underlying connection in ConnectionManagerImpl::underlying_connection_above_high_watermark_ and if a new stream is created while the underlying connection is above the high watermark, the new stream has watermark callbacks called on creation.

HTTP implementation details

HTTP flow control is extremely similar to HTTP/2 flow control, with the main exception being that the method used to halt the flow of downstream/upstream data is to disable reads on the underlying Network::Connection. As the TCP data stops being consumed the peer will eventually fill their congestion window and stop sending.

As with HTTP/2, a given stream may end in a state where the connection has had readDisable(true) called. When a new stream is created on that connection for a subsequent request, any outstanding readDisable(true) calls are unwound in Http::Http1::ConnectionImpl::newStream().

Filter and network backups are identical in the HTTP and HTTP/2 cases and are documented above. Codec backup is slightly different and is documented below.

HTTP codec downstream send buffer

As with the HTTP/2 codec recv buffer, the HTTP codec send buffer is only expected to have data pass through it. It should never back up. Still, in the event it does, the high watermark path is as follows:

  • When Http::Http1::ConnectionImpl::output_buffer_ has too much data buffered it calls onOutputBufferAboveHighWatermark()

  • Http::Http1::ConnectionImpl::ServerConnectionImpl::onOutputBufferAboveHighWatermark() calls runHighWatermarkCallbacks() which results in all subscribers of Envoy::Http::StreamCallbacks receiving an onAboveWriteBufferHighWatermark() callback. From this point the ConnectionManagerImpl takes over and the code path is the same as for the HTTP/2 codec downstream send buffer.

  • When Http::Http1::ConnectionImpl::output_buffer_ drains it calls onOutputBufferBelowLowWatermark()

  • Http::Http1::ConnectionImpl::ServerConnectionImpl::onOutputBufferBelowLowWatermark() calls runLowWatermarkCallbacks() which results in all subscribers of Envoy::Http::StreamCallbacks receiving an onBelowWriteBufferLowWatermark() callback. From this point the ConnectionManagerImpl takes over and the code path is the same as for the HTTP/2 codec downstream send buffer.

HTTP codec upstream send buffer

As with the HTTP downstream send buffer, the HTTP codec send buffer is only expected to have data pass through it. It should never back up. Still, in the event it does, the high watermark path is as follows:

  • When Http::Http1::ConnectionImpl::output_buffer_ has too much data buffered it calls onOutputBufferAboveHighWatermark()

  • Http::Http1::ConnectionImpl::ClientConnectionImpl::onOutputBufferAboveHighWatermark() calls runHighWatermarkCallbacks() which results in all subscribers of Envoy::Http::StreamCallbacks receiving an onAboveWriteBufferHighWatermark() callback. From this point on the Envoy::Router::Filter picks up the event and the code path is the same as for the HTTP/2 codec upstream send buffer.

  • When Http::Http1::ConnectionImpl::output_buffer_ drains it calls onOutputBufferBelowLowWatermark()

  • Http::Http1::ConnectionImpl::ClientConnectionImpl::onOutputBufferBelowLowWatermark() calls runLowWatermarkCallbacks() which results in all subscribers of Envoy::Http::StreamCallbacks receiving an onBelowWriteBufferLowWatermark() callback. From this point on the Envoy::Router::Filter picks up the event and the code path is the same as for the HTTP/2 codec upstream send buffer.