Stride to Osmosis IBC Bug for DYM

[DwarfNinjaV]

Describe the bug
There appears to be an issue where sometimes doing an IBC Send on the Keplr wallet via a Ledger. Keplr appears to be using the Coin type 118. this is Per @bpiv400 on Twitter.

To Reproduce
Steps to reproduce the behavior:
I can produce this everytime using Leap and Ledger.

1. Generate an IBC transfer from Osmosis to Stride using Leap Send
2. Now send the Dym from Stride to Osmosis using Keplr

Both of these have the Ethereum\Dym Address setup and both of them have the same DYM address which is the one not being used.

Expected behavior
Id expect the IBC transfer to transfer as normal

Screenshots

TX: E7DCD4C389215D40EE7B7CD2262F7EC93E1E31B4EEAB61088093F1B0B17E1F65

See how the DYM shows in Keplr but not on Stride this is what made me go duh just buy stDym and transfer it to Stride so here is where I went to Keplr cause no matter what Leap wont send this.

This won’t even populate the tx to sign it just does nothing. Leap prevents the IBC

Leap Errors

So now we go to Keplr and Search Dym and hit Send

Here is the Send Data
`Keplr Tx:

Data: {
"account_number": "15283",
"chain_id": "stride-1",
"fee": {
"gas": "165488",
"amount": [
{
"amount": "828",
"denom": "ustrd"
}
]
},
"memo": "Stride to Osmosis via Keplr Extension. DYM Transfer",
"msgs": [
{
"type": "cosmos-sdk/MsgTransfer",
"value": {
"memo": "{"forward":{"receiver":"dym13nhlg7cqspec5e0yv0n6nts3zcmfnc6hxa50xc","port":"transfer","channel":"channel-19774","forward":{"receiver":"osmo13nhlg7cqspec5e0yv0n6nts3zcmfnc6humte4y","port":"transfer","channel":"channel-2"}}}",
"receiver": "osmo13nhlg7cqspec5e0yv0n6nts3zcmfnc6humte4y",
"sender": "stride13nhlg7cqspec5e0yv0n6nts3zcmfnc6hhtc4h6",
"source_channel": "channel-5",
"source_port": "transfer",
"timeout_height": {
"revision_height": "14807943",
"revision_number": "1"
},
"token": {
"amount": "500000000000000000",
"denom": "ibc/3E039E6F6B10D2062BB1C248E1C8D14FC0D380D809D4BAD216C835323C2AF839"
}
}
}
],
"sequence": "62"
}
`

TX: B7F68EBB595C662676A04EE2E003DDDFC37859A8B8E2B62476948767F23140AF

And now the DYM is stuck in this dym wallet during the IBC transfer (dym13nhlg7cqspec5e0yv0n6nts3zcmfnc6hxa50xc)

my ETH Dym address that is in both Leap and Keplr is dym1sj8zr5qa35de76wu7f2zanmmccu3ad2lt2slfz

Device details (please complete the following information):

• OS: Windows 10 Pro, 22H2, OS Build 19045.4291
• Browser: Chrome Version 123.0.6312.106 (Official Build) (64-bit)
• Keplr Version: 0.12.78
• Hardware Wallet: Ledger Nano X Latest Firmware

Additional context
If you look at that DYM address its using during the transfers some of them go through fine its only randomly that a TX will get stuck.

[DwarfNinjaV]

Should note on this that ideally I can get a way in Keplr to move these funds out of that dym wallet I clearly have sign rights but how do I access it. Maybe some sort of lost in space sweep Keplr can do.

[Thunnini]

Hey, sorry for getting back to you issue so late. The issue has been solved in the most recent version.
Please download the most recent version from keplr-extension-manifest-v2-v0.12.81-dym-temp.0.zip this link, then enter chrome://extensions/ as the address, then find the existing keplr, turn it off then turn on develeloper mode from the top right corner, drag and drop the downloaded file to the browser to use the alternative version. This will get you the development version of keplr installed and when you create a mnemonic through this version, you would have some dym in your dymension address. Send that to your pre-existing address then delete the keplr developer app then turn on your existing keplr and use it

[DwarfNinjaV]

That doesn't make sense for what I'm trying to get to. I need a way to access the Dym address Keplr created from my Cosmos app not the Eth app off the Ledger. Keplr is apparently using that as some sort of transfer address. See above what @bpiv400 stated on twitter.

[DwarfNinjaV]

Also would like to note that my Keplr version has updated to 0.12.82

[Thunnini]

Understood. However, this is due to a bug, so it's difficult to resolve in the production version. Download keplr-extension-manifest-v2-v0.12.81-dym-temp.1.zip and install it manually as described above. Then, you will be able to create an account with a different dym address. Transfer DYM from there to your main account.

[DwarfNinjaV]

Im sorry I know your one of the devs that works on it but I have a hard time installing beta or temp builds to work with my Ledger.

Why not have a sweet built into keplr to empty out EVM wallets that are used with Ledger. It clearly has sign rights and just gets stuck during an IBC send.

[Thunnini]

�It is structurally difficult to support both ethereum app and cosmos app on one chain at the same time. I sent 30DYM to osmosis account "osmo13nhlg7cqspec5e0yv0n6nts3zcmfnc6humte4y", please check.

[DwarfNinjaV]

I understand and you didnt have to send the DYM.