forked from adafruit/TinyLoRa
-
Notifications
You must be signed in to change notification settings - Fork 0
/
Copy pathTinyLoRa.cpp
1199 lines (1024 loc) · 32.5 KB
/
TinyLoRa.cpp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
/*!
* @file TinyLoRa.cpp
*
* @mainpage TinyLoRa RFM95/96W breakout driver
*
* @section intro_sec Introduction
*
* This is the documentation for Adafruit's Feather LoRa for the
* Arduino platform. It is designed specifically to work with the
* Adafruit Feather 32u4 LoRa.
*
* This library uses SPI to communicate, 4 pins (SCL, SDA, IRQ, SS)
* are required to interface with the HopeRF RFM95/96 breakout.
*
* Adafruit invests time and resources providing this open source code,
* please support Adafruit and open-source hardware by purchasing
* products from Adafruit!
*
* @section dependencies Dependencies
*
* This library has no dependencies.
*
* @section author Author
*
* Copyright 2015, 2016 Ideetron B.V.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*
* Modified by Brent Rubell for Adafruit Industries.
*
* @section license License
*
* LGPL license, all text here must be included in any redistribution.
*
*/
#include "TinyLoRa.h"
#include <SPI.h>
extern uint8_t NwkSkey[16]; ///< Network Session Key
extern uint8_t AppSkey[16]; ///< Application Session Key
extern uint8_t DevAddr[4]; ///< Device Address
static SPISettings RFM_spisettings = SPISettings(4000000, MSBFIRST, SPI_MODE0);
/*
*****************************************************************************************
* Description: TTN regional frequency plans
*****************************************************************************************
*/
#ifdef AU915
const unsigned char PROGMEM TinyLoRa::LoRa_Frequency[8][3] = {
{ 0xE5, 0x33, 0x5A }, //Channel 0 916.800 MHz / 61.035 Hz = 15020890 = 0xE5335A
{ 0xE5, 0x40, 0x26 }, //Channel 2 917.000 MHz / 61.035 Hz = 15024166 = 0xE54026
{ 0xE5, 0x4C, 0xF3 }, //Channel 3 917.200 MHz / 61.035 Hz = 15027443 = 0xE54CF3
{ 0xE5, 0x59, 0xC0 }, //Channel 4 917.400 MHz / 61.035 Hz = 15030720 = 0xE559C0
{ 0xE5, 0x66, 0x8D }, //Channel 5 917.600 MHz / 61.035 Hz = 15033997 = 0xE5668D
{ 0xE5, 0x73, 0x5A }, //Channel 6 917.800 MHz / 61.035 Hz = 15037274 = 0xE5735A
{ 0xE5, 0x80, 0x27 }, //Channel 7 918.000 MHz / 61.035 Hz = 15040551 = 0xE58027
{ 0xE5, 0x8C, 0xF3 } //Channel 8 918.200 MHz / 61.035 Hz = 15043827 = 0xE58CF3
};
#endif
#ifdef EU863
const unsigned char PROGMEM TinyLoRa::LoRa_Frequency[8][3] = {
{ 0xD9, 0x06, 0x8B }, //Channel 0 868.100 MHz / 61.035 Hz = 14222987 = 0xD9068B
{ 0xD9, 0x13, 0x58 }, //Channel 1 868.300 MHz / 61.035 Hz = 14226264 = 0xD91358
{ 0xD9, 0x20, 0x24 }, //Channel 2 868.500 MHz / 61.035 Hz = 14229540 = 0xD92024
{ 0xD8, 0xC6, 0x8B }, //Channel 3 867.100 MHz / 61.035 Hz = 14206603 = 0xD8C68B
{ 0xD8, 0xD3, 0x58 }, //Channel 4 867.300 MHz / 61.035 Hz = 14209880 = 0xD8D358
{ 0xD8, 0xE0, 0x24 }, //Channel 5 867.500 MHz / 61.035 Hz = 14213156 = 0xD8E024
{ 0xD8, 0xEC, 0xF1 }, //Channel 6 867.700 MHz / 61.035 Hz = 14216433 = 0xD8ECF1
{ 0xD8, 0xF9, 0xBE } //Channel 7 867.900 MHz / 61.035 Hz = 14219710 = 0xD8F9BE
};
#endif
#ifdef US902
const unsigned char PROGMEM TinyLoRa::LoRa_Frequency[8][3] = {
{ 0xE1, 0xF9, 0xC0 }, //Channel 0 903.900 MHz / 61.035 Hz = 14809536 = 0xE1F9C0
{ 0xE2, 0x06, 0x8C }, //Channel 1 904.100 MHz / 61.035 Hz = 14812812 = 0xE2068C
{ 0xE2, 0x13, 0x59}, //Channel 2 904.300 MHz / 61.035 Hz = 14816089 = 0xE21359
{ 0xE2, 0x20, 0x26 }, //Channel 3 904.500 MHz / 61.035 Hz = 14819366 = 0xE22026
{ 0xE2, 0x2C, 0xF3 }, //Channel 4 904.700 MHz / 61.035 Hz = 14822643 = 0xE22CF3
{ 0xE2, 0x39, 0xC0 }, //Channel 5 904.900 MHz / 61.035 Hz = 14825920 = 0xE239C0
{ 0xE2, 0x46, 0x8C }, //Channel 6 905.100 MHz / 61.035 Hz = 14829196 = 0xE2468C
{ 0xE2, 0x53, 0x59 } //Channel 7 905.300 MHz / 61.035 Hz = 14832473 = 0xE25359
};
#endif
#ifdef AS920
const unsigned char PROGMEM TinyLoRa::LoRa_Frequency[8][3] = {
{ 0xE6, 0xCC, 0xF4 }, //Channel 0 868.100 MHz / 61.035 Hz = 15125748 = 0xE6CCF4
{ 0xE6, 0xD9, 0xC0 }, //Channel 1 868.300 MHz / 61.035 Hz = 15129024 = 0xE6D9C0
{ 0xE6, 0x8C, 0xF3 }, //Channel 2 868.500 MHz / 61.035 Hz = 15109363 = 0xE68CF3
{ 0xE6, 0x99, 0xC0 }, //Channel 3 867.100 MHz / 61.035 Hz = 15112640 = 0xE699C0
{ 0xE6, 0xA6, 0x8D }, //Channel 4 867.300 MHz / 61.035 Hz = 15115917 = 0xE6A68D
{ 0xE6, 0xB3, 0x5A }, //Channel 5 867.500 MHz / 61.035 Hz = 15119194 = 0xE6B35A
{ 0xE6, 0xC0, 0x27 }, //Channel 6 867.700 MHz / 61.035 Hz = 15122471 = 0xE6C027
{ 0xE6, 0x80, 0x27 } //Channel 7 867.900 MHz / 61.035 Hz = 15106087 = 0xE68027
};
#endif
/*
*****************************************************************************************
* Description: S_Table used for AES encription
*****************************************************************************************
*/
const unsigned char PROGMEM TinyLoRa::S_Table[16][16] = {
{0x63,0x7C,0x77,0x7B,0xF2,0x6B,0x6F,0xC5,0x30,0x01,0x67,0x2B,0xFE,0xD7,0xAB,0x76},
{0xCA,0x82,0xC9,0x7D,0xFA,0x59,0x47,0xF0,0xAD,0xD4,0xA2,0xAF,0x9C,0xA4,0x72,0xC0},
{0xB7,0xFD,0x93,0x26,0x36,0x3F,0xF7,0xCC,0x34,0xA5,0xE5,0xF1,0x71,0xD8,0x31,0x15},
{0x04,0xC7,0x23,0xC3,0x18,0x96,0x05,0x9A,0x07,0x12,0x80,0xE2,0xEB,0x27,0xB2,0x75},
{0x09,0x83,0x2C,0x1A,0x1B,0x6E,0x5A,0xA0,0x52,0x3B,0xD6,0xB3,0x29,0xE3,0x2F,0x84},
{0x53,0xD1,0x00,0xED,0x20,0xFC,0xB1,0x5B,0x6A,0xCB,0xBE,0x39,0x4A,0x4C,0x58,0xCF},
{0xD0,0xEF,0xAA,0xFB,0x43,0x4D,0x33,0x85,0x45,0xF9,0x02,0x7F,0x50,0x3C,0x9F,0xA8},
{0x51,0xA3,0x40,0x8F,0x92,0x9D,0x38,0xF5,0xBC,0xB6,0xDA,0x21,0x10,0xFF,0xF3,0xD2},
{0xCD,0x0C,0x13,0xEC,0x5F,0x97,0x44,0x17,0xC4,0xA7,0x7E,0x3D,0x64,0x5D,0x19,0x73},
{0x60,0x81,0x4F,0xDC,0x22,0x2A,0x90,0x88,0x46,0xEE,0xB8,0x14,0xDE,0x5E,0x0B,0xDB},
{0xE0,0x32,0x3A,0x0A,0x49,0x06,0x24,0x5C,0xC2,0xD3,0xAC,0x62,0x91,0x95,0xE4,0x79},
{0xE7,0xC8,0x37,0x6D,0x8D,0xD5,0x4E,0xA9,0x6C,0x56,0xF4,0xEA,0x65,0x7A,0xAE,0x08},
{0xBA,0x78,0x25,0x2E,0x1C,0xA6,0xB4,0xC6,0xE8,0xDD,0x74,0x1F,0x4B,0xBD,0x8B,0x8A},
{0x70,0x3E,0xB5,0x66,0x48,0x03,0xF6,0x0E,0x61,0x35,0x57,0xB9,0x86,0xC1,0x1D,0x9E},
{0xE1,0xF8,0x98,0x11,0x69,0xD9,0x8E,0x94,0x9B,0x1E,0x87,0xE9,0xCE,0x55,0x28,0xDF},
{0x8C,0xA1,0x89,0x0D,0xBF,0xE6,0x42,0x68,0x41,0x99,0x2D,0x0F,0xB0,0x54,0xBB,0x16}
};
/***************************************************************************
CONSTRUCTORS
***************************************************************************/
/**************************************************************************/
/*!
@brief Sets the RFM datarate
@param datarate Bandwidth and Frequency plan.
*/
/**************************************************************************/
void TinyLoRa::setDatarate(rfm_datarates_t datarate) {
switch(datarate) {
case SF7BW125:
_sf = 0x74;
_bw = 0x72;
_modemcfg = 0x04;
break;
case SF7BW250:
_sf = 0x74;
_bw = 0x82;
_modemcfg = 0x04;
break;
case SF8BW125:
_sf = 0x84;
_bw = 0x72;
_modemcfg = 0x04;
break;
case SF9BW125:
_sf = 0x94;
_bw = 0x72;
_modemcfg = 0x04;
break;
case SF10BW125:
_sf = 0xA4;
_bw = 0x72;
_modemcfg = 0x04;
break;
case SF11BW125:
_sf = 0xB4;
_bw = 0x72;
_modemcfg = 0x0C;
break;
case SF12BW125:
_sf = 0xC4;
_bw = 0x72;
_modemcfg = 0x0C;
break;
default:
_sf = 0x74;
_bw = 0x72;
_modemcfg = 0x04;
break;
}
}
/**************************************************************************/
/*!
@brief Sets the RFM channel.
@param channel Which channel to send data
*/
/**************************************************************************/
void TinyLoRa::setChannel(rfm_channels_t channel) {
_rfmMSB = 0;
_rfmLSB = 0;
_rfmMID = 0;
switch (channel)
{
case CH0:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[0][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[0][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[0][0]));
_isMultiChan = 0;
break;
case CH1:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[1][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[1][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[1][0]));
_isMultiChan = 0;
break;
case CH2:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[2][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[2][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[2][0]));
_isMultiChan = 0;
break;
case CH3:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[3][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[3][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[3][0]));
_isMultiChan = 0;
break;
case CH4:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[4][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[4][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[4][0]));
_isMultiChan = 0;
break;
case CH5:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[5][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[5][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[5][0]));
_isMultiChan = 0;
break;
case CH6:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[6][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[6][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[6][0]));
_isMultiChan = 0;
break;
case CH7:
_rfmLSB = pgm_read_byte(&(LoRa_Frequency[7][2]));
_rfmMID = pgm_read_byte(&(LoRa_Frequency[7][1]));
_rfmMSB = pgm_read_byte(&(LoRa_Frequency[7][0]));
_isMultiChan = 0;
break;
case MULTI:
_isMultiChan = 1;
break;
default:
_isMultiChan = 1;
break;
}
}
/**************************************************************************/
/*!
@brief Instanciates a new TinyLoRa class, including assigning
irq and cs pins to the RFM breakout.
@param rfm_irq
The RFM module's interrupt pin (rfm_nss).
@param rfm_nss
The RFM module's slave select pin (rfm_nss).
@param rfm_rst
The RFM module's reset pin (rfm_rst).
*/
/**************************************************************************/
TinyLoRa::TinyLoRa(int8_t rfm_irq, int8_t rfm_nss, int8_t rfm_rst) {
_irq = rfm_irq;
_cs = rfm_nss;
_rst = rfm_rst;
}
/***************************************************************************
PUBLIC FUNCTIONS
***************************************************************************/
/**************************************************************************/
/*!
@brief Initializes the RFM, including configuring SPI, configuring
the frameCounter and txrandomNum.
@return True if the RFM has been initialized
*/
/**************************************************************************/
bool TinyLoRa::begin()
{
// start and configure SPI
SPI.begin();
// RFM _cs as output
pinMode(_cs, OUTPUT);
// RFM _irq as input
pinMode(_irq, INPUT);
if (_rst > 0){
// RFM _rst as output
pinMode(_rst, OUTPUT);
// Reset the RFM radio module
digitalWrite(_rst, LOW);
delay(0.1);
digitalWrite(_rst, HIGH);
delay(5);
}
// Reset the radio module on init
uint8_t ver = RFM_Read(REG_VER);
if(ver != RFM9x_VER)
return 0;
//Switch RFM to sleep
RFM_Write(0x01,MODE_SLEEP);
//Set RFM in LoRa mode
RFM_Write(0x01,MODE_LORA);
//PA pin (maximal power)
RFM_Write(0x09,0xFF);
//Rx Timeout set to 37 symbols
RFM_Write(0x1F,0x25);
//Preamble length set to 8 symbols
//0x0008 + 4 = 12
RFM_Write(REG_PREAMBLE_MSB,0x00);
RFM_Write(REG_PREAMBLE_LSB,0x08);
//Low datarate optimization off AGC auto on
RFM_Write(0x26,0x0C);
//Set LoRa sync word
RFM_Write(0x39,0x34);
//Set IQ to normal values
RFM_Write(0x33,0x27);
RFM_Write(0x3B,0x1D);
//Set FIFO pointers
//TX base adress
RFM_Write(0x0E,0x80);
//Rx base adress
RFM_Write(0x0F,0x00);
// init frame counter
frameCounter = 0x0000;
// init tx random number for first use
txrandomNum = 0x00;
return 1;
}
/**************************************************************************/
/*!
@brief Sends a package with the RFM module.
@param *RFM_Tx_Package
Pointer to array containing data to be sent.
@param Package_Length
Length of the package to be sent.
*/
/**************************************************************************/
void TinyLoRa::RFM_Send_Package(unsigned char *RFM_Tx_Package, unsigned char Package_Length)
{
unsigned char i;
//Set RFM in Standby mode wait on mode ready
RFM_Write(MODE_STDBY,0x81);
// wait for standby mode
delay(10);
//Switch _irq to TxDone
RFM_Write(0x40,0x40);
// select rfm channel
if (_isMultiChan == 1) {
RFM_Write(REG_FRF_MSB, pgm_read_byte(&(LoRa_Frequency[randomNum][0])));
RFM_Write(REG_FRF_MID, pgm_read_byte(&(LoRa_Frequency[randomNum][1])));
RFM_Write(REG_FRF_LSB, pgm_read_byte(&(LoRa_Frequency[randomNum][2])));
} else {
RFM_Write(REG_FRF_MSB, _rfmMSB);
RFM_Write(REG_FRF_MID, _rfmMID);
RFM_Write(REG_FRF_LSB, _rfmLSB);
}
/* Set RFM Datarate */
RFM_Write(REG_FEI_LSB, _sf);
RFM_Write(REG_FEI_MSB, _bw);
RFM_Write(REG_MODEM_CONFIG, _modemcfg);
//Set payload length to the right length
RFM_Write(0x22,Package_Length);
//Set SPI pointer to start of Tx part in FiFo
RFM_Write(0x0D,0x80);
//Write Payload to FiFo
for (i = 0;i < Package_Length; i++)
{
RFM_Write(0x00,*RFM_Tx_Package);
RFM_Tx_Package++;
}
//Switch RFM to Tx
RFM_Write(0x01,MODE_TX);
//Wait _irq to pull high
while(digitalRead(_irq) == LOW)
{
}
//Switch RFM to sleep
RFM_Write(0x01,MODE_SLEEP);
}
/**************************************************************************/
/*!
@brief Function which writes to a register from the RFM.
@param RFM_Address
An address of the register to be written.
@param RFM_Data
Data to be written to the register.
*/
/**************************************************************************/
void TinyLoRa::RFM_Write(unsigned char RFM_Address, unsigned char RFM_Data)
{
#ifdef DEBUG
Serial.print("SPI Write ADDR: ");
Serial.print(RFM_Address, HEX);
Serial.print(" DATA: ");
Serial.println(RFM_Data, HEX);
#endif
SPI.beginTransaction(RFM_spisettings);
//Set NSS pin Low to start communication
digitalWrite(_cs, LOW);
//Send Address with MSB 1 to make it a writ command
SPI.transfer(RFM_Address | 0x80);
//Send Data
SPI.transfer(RFM_Data);
//Set NSS pin High to end communication
digitalWrite(_cs, HIGH);
SPI.endTransaction();
}
/**************************************************************************/
/*!
@brief Funtion that reads a register from the RFM
@param RFM_Address
An address of the register to be read.
@return Value exchaged in SPI transaction
*/
/**************************************************************************/
uint8_t TinyLoRa::RFM_Read(uint8_t RFM_Address) {
SPI.beginTransaction(RFM_spisettings);
digitalWrite(_cs, LOW);
SPI.transfer(RFM_Address & 0x7F);
uint8_t RFM_Data = SPI.transfer(0x00);
digitalWrite(_cs, HIGH);
SPI.endTransaction();
#ifdef DEBUG
Serial.print("SPI Read ADDR: ");
Serial.print(RFM_Address, HEX);
Serial.print(" DATA: ");
Serial.println(RFM_Data, HEX);
#endif
return RFM_Data;
}
/**************************************************************************/
/*!
@brief Function to assemble and send a LoRaWAN package.
@param *Data
Pointer to the array of data to be transmitted.
@param Frame_Counter_Tx
Frame counter for transfer frames.
@param Data_Length
Length of data to be sent.
@param Frame_Port
Frame port to send data from, from 0 to 225.
*/
/**************************************************************************/
void TinyLoRa::sendData(unsigned char *Data, unsigned char Data_Length, unsigned int Frame_Counter_Tx, uint8_t Frame_Port)
{
//Define variables
unsigned char i;
//Direction of frame is up
unsigned char Direction = 0x00;
unsigned char RFM_Data[64];
unsigned char RFM_Package_Length;
unsigned char MIC[4];
//Unconfirmed data up
unsigned char Mac_Header = 0x40;
unsigned char Frame_Control = 0x00;
//make a copy of Data
unsigned char tmpData[Data_Length];
for (int i = 0; i < Data_Length; i++)
{
tmpData[i] = Data[i];
}
//Encrypt Data (data argument is overwritten in this function)
Encrypt_Payload(tmpData, Data_Length, Frame_Counter_Tx, Direction);
//Build the Radio Package
RFM_Data[0] = Mac_Header;
RFM_Data[1] = DevAddr[3];
RFM_Data[2] = DevAddr[2];
RFM_Data[3] = DevAddr[1];
RFM_Data[4] = DevAddr[0];
RFM_Data[5] = Frame_Control;
RFM_Data[6] = (Frame_Counter_Tx & 0x00FF);
RFM_Data[7] = ((Frame_Counter_Tx >> 8) & 0x00FF);
RFM_Data[8] = Frame_Port;
//Set Current package length
RFM_Package_Length = 9;
//Load Data
for(i = 0; i < Data_Length; i++)
{
RFM_Data[RFM_Package_Length + i] = tmpData[i];
}
//Add data Lenth to package length
RFM_Package_Length = RFM_Package_Length + Data_Length;
#ifdef DEBUG
Serial.print("Package length: ");
Serial.println(RFM_Package_Length);
#endif
//Calculate MIC
Calculate_MIC(RFM_Data, MIC, RFM_Package_Length, Frame_Counter_Tx, Direction);
//Load MIC in package
for(i = 0; i < 4; i++)
{
RFM_Data[i + RFM_Package_Length] = MIC[i];
}
//Add MIC length to RFM package length
RFM_Package_Length = RFM_Package_Length + 4;
//Send Package
RFM_Send_Package(RFM_Data, RFM_Package_Length);
#ifdef DEBUG
Serial.println("sent package!");
#endif
}
/**************************************************************************/
/*!
@brief Function used to encrypt and decrypt the data in a LoRaWAN
data packet.
@param *Data
Pointer to the data to decrypt or encrypt.
@param Data_Length
Number of bytes to be transmitted.
@param Frame_Counter
Counts upstream frames.
@param Direction
Direction of message (is up).
*/
/**************************************************************************/
void TinyLoRa::Encrypt_Payload(unsigned char *Data, unsigned char Data_Length, unsigned int Frame_Counter, unsigned char Direction)
{
unsigned char i = 0x00;
unsigned char j;
unsigned char Number_of_Blocks = 0x00;
unsigned char Incomplete_Block_Size = 0x00;
unsigned char Block_A[16];
//Calculate number of blocks
Number_of_Blocks = Data_Length / 16;
Incomplete_Block_Size = Data_Length % 16;
if(Incomplete_Block_Size != 0)
{
Number_of_Blocks++;
}
for(i = 1; i <= Number_of_Blocks; i++)
{
Block_A[0] = 0x01;
Block_A[1] = 0x00;
Block_A[2] = 0x00;
Block_A[3] = 0x00;
Block_A[4] = 0x00;
Block_A[5] = Direction;
Block_A[6] = DevAddr[3];
Block_A[7] = DevAddr[2];
Block_A[8] = DevAddr[1];
Block_A[9] = DevAddr[0];
Block_A[10] = (Frame_Counter & 0x00FF);
Block_A[11] = ((Frame_Counter >> 8) & 0x00FF);
Block_A[12] = 0x00; //Frame counter upper Bytes
Block_A[13] = 0x00;
Block_A[14] = 0x00;
Block_A[15] = i;
//Calculate S
AES_Encrypt(Block_A,AppSkey); //original
//Check for last block
if(i != Number_of_Blocks)
{
for(j = 0; j < 16; j++)
{
*Data = *Data ^ Block_A[j];
Data++;
}
}
else
{
if(Incomplete_Block_Size == 0)
{
Incomplete_Block_Size = 16;
}
for(j = 0; j < Incomplete_Block_Size; j++)
{
*Data = *Data ^ Block_A[j];
Data++;
}
}
}
}
/**************************************************************************/
/*!
@brief Function used to calculate the validity of data messages.
@param *Data
Pointer to the data to decrypt or encrypt.
@param Data_Length
Number of bytes to be transmitted.
@param *Final_Mic
Pointer to MIC array (4 bytes).
@param Frame_Counter
Frame counter of upstream frames.
@param Direction
Direction of message (is up?).
*/
/**************************************************************************/
void TinyLoRa::Calculate_MIC(unsigned char *Data, unsigned char *Final_MIC, unsigned char Data_Length, unsigned int Frame_Counter, unsigned char Direction)
{
unsigned char i;
unsigned char Block_B[16];
unsigned char Key_K1[16] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char Key_K2[16] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
//unsigned char Data_Copy[16];
unsigned char Old_Data[16] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char New_Data[16] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char Number_of_Blocks = 0x00;
unsigned char Incomplete_Block_Size = 0x00;
unsigned char Block_Counter = 0x01;
//Create Block_B
Block_B[0] = 0x49;
Block_B[1] = 0x00;
Block_B[2] = 0x00;
Block_B[3] = 0x00;
Block_B[4] = 0x00;
Block_B[5] = Direction;
Block_B[6] = DevAddr[3];
Block_B[7] = DevAddr[2];
Block_B[8] = DevAddr[1];
Block_B[9] = DevAddr[0];
Block_B[10] = (Frame_Counter & 0x00FF);
Block_B[11] = ((Frame_Counter >> 8) & 0x00FF);
Block_B[12] = 0x00; //Frame counter upper bytes
Block_B[13] = 0x00;
Block_B[14] = 0x00;
Block_B[15] = Data_Length;
//Calculate number of Blocks and blocksize of last block
Number_of_Blocks = Data_Length / 16;
Incomplete_Block_Size = Data_Length % 16;
if(Incomplete_Block_Size != 0)
{
Number_of_Blocks++;
}
Generate_Keys(Key_K1, Key_K2);
//Preform Calculation on Block B0
//Preform AES encryption
AES_Encrypt(Block_B,NwkSkey);
//Copy Block_B to Old_Data
for(i = 0; i < 16; i++)
{
Old_Data[i] = Block_B[i];
}
//Preform full calculating until n-1 messsage blocks
while(Block_Counter < Number_of_Blocks)
{
//Copy data into array
for(i = 0; i < 16; i++)
{
New_Data[i] = *Data;
Data++;
}
//Preform XOR with old data
XOR(New_Data,Old_Data);
//Preform AES encryption
AES_Encrypt(New_Data,NwkSkey);
//Copy New_Data to Old_Data
for(i = 0; i < 16; i++)
{
Old_Data[i] = New_Data[i];
}
//Raise Block counter
Block_Counter++;
}
//Perform calculation on last block
//Check if Datalength is a multiple of 16
if(Incomplete_Block_Size == 0)
{
//Copy last data into array
for(i = 0; i < 16; i++)
{
New_Data[i] = *Data;
Data++;
}
//Preform XOR with Key 1
XOR(New_Data,Key_K1);
//Preform XOR with old data
XOR(New_Data,Old_Data);
//Preform last AES routine
// read NwkSkey from PROGMEM
AES_Encrypt(New_Data,NwkSkey);
}
else
{
//Copy the remaining data and fill the rest
for(i = 0; i < 16; i++)
{
if(i < Incomplete_Block_Size)
{
New_Data[i] = *Data;
Data++;
}
if(i == Incomplete_Block_Size)
{
New_Data[i] = 0x80;
}
if(i > Incomplete_Block_Size)
{
New_Data[i] = 0x00;
}
}
//Preform XOR with Key 2
XOR(New_Data,Key_K2);
//Preform XOR with Old data
XOR(New_Data,Old_Data);
//Preform last AES routine
AES_Encrypt(New_Data,NwkSkey);
}
Final_MIC[0] = New_Data[0];
Final_MIC[1] = New_Data[1];
Final_MIC[2] = New_Data[2];
Final_MIC[3] = New_Data[3];
// Generate a random number between 0 and 7 to select next transmit channel
randomNum = Final_MIC[3] & 0x07;
// Generate a random number between 0 and 7 to randomise next transmit message schedule
txrandomNum = Final_MIC[2] & 0x07;
}
/**************************************************************************/
/*!
@brief Function used to generate keys for the MIC calculation.
@param *K1
Pointer to Key1.
@param *K2
Pointer to Key2.
*/
/**************************************************************************/
void TinyLoRa::Generate_Keys(unsigned char *K1, unsigned char *K2)
{
unsigned char i;
unsigned char MSB_Key;
//Encrypt the zeros in K1 with the NwkSkey
AES_Encrypt(K1,NwkSkey);
//Create K1
//Check if MSB is 1
if((K1[0] & 0x80) == 0x80)
{
MSB_Key = 1;
}
else
{
MSB_Key = 0;
}
//Shift K1 one bit left
Shift_Left(K1);
//if MSB was 1
if(MSB_Key == 1)
{
K1[15] = K1[15] ^ 0x87;
}
//Copy K1 to K2
for( i = 0; i < 16; i++)
{
K2[i] = K1[i];
}
//Check if MSB is 1
if((K2[0] & 0x80) == 0x80)
{
MSB_Key = 1;
}
else
{
MSB_Key = 0;
}
//Shift K2 one bit left
Shift_Left(K2);
//Check if MSB was 1
if(MSB_Key == 1)
{
K2[15] = K2[15] ^ 0x87;
}
}
void TinyLoRa::Shift_Left(unsigned char *Data)
{
unsigned char i;
unsigned char Overflow = 0;
//unsigned char High_Byte, Low_Byte;
for(i = 0; i < 16; i++)
{
//Check for overflow on next byte except for the last byte
if(i < 15)
{
//Check if upper bit is one
if((Data[i+1] & 0x80) == 0x80)
{
Overflow = 1;
}
else
{
Overflow = 0;
}
}
else
{
Overflow = 0;
}
//Shift one left
Data[i] = (Data[i] << 1) + Overflow;
}
}
/**************************************************************************/
/*!
@brief Function to XOR two character arrays.
@param *New_Data
A pointer to the calculated data.
@param *Old_Data
A pointer to the data to be xor'd.
*/
/**************************************************************************/
void TinyLoRa::XOR(unsigned char *New_Data,unsigned char *Old_Data)
{
unsigned char i;
for(i = 0; i < 16; i++)
{
New_Data[i] = New_Data[i] ^ Old_Data[i];
}
}
/**************************************************************************/
/*!
@brief Function used to perform AES encryption.
@param *Data
Pointer to the data to decrypt or encrypt.
@param *Key
Pointer to AES encryption key.
*/
/**************************************************************************/
void TinyLoRa::AES_Encrypt(unsigned char *Data, unsigned char *Key)
{
unsigned char Row, Column, Round = 0;
unsigned char Round_Key[16];
unsigned char State[4][4];
// Copy input to State arry
for( Column = 0; Column < 4; Column++ )
{
for( Row = 0; Row < 4; Row++ )
{
State[Row][Column] = Data[Row + (Column << 2)];
}
}
// Copy key to round key
memcpy( &Round_Key[0], &Key[0], 16 );
// Add round key
AES_Add_Round_Key( Round_Key, State );
// Preform 9 full rounds with mixed collums
for( Round = 1 ; Round < 10 ; Round++ )
{
// Perform Byte substitution with S table
for( Column = 0 ; Column < 4 ; Column++ )
{
for( Row = 0 ; Row < 4 ; Row++ )
{
State[Row][Column] = AES_Sub_Byte( State[Row][Column] );
}
}
// Perform Row Shift