go 的有锁数据结构，CSP 概念的组成因子之一。
阻塞式 channel ：
var a = make(chan int)非阻塞 channel：
var a = make(chan int, 10)阻塞和非阻塞关键就在是否有 capacity。没有 capacity 的话，channel 也就只是个同步通信工具。
向 channel 中发送内容：
ch := make(chan int, 100)
ch <- 1从 channel 中接收内容：
var i = <- ch关闭 channel：
close(ch)注意，已关闭的 channel，再次关闭会 panic
close(ch)
close(ch) // panic: close of closed channel在 channel 关闭时自动退出循环
func main() {
ch := make(chan int, 100)
for elem := range ch { // 主要就是这里的 for range...
fmt.Println(i)
}
}获取 channel 中元素数量、buffer 容量：
func main() {
ch := make(chan int, 100)
ch <- 1
fmt.Println(len(ch)) // 1
fmt.Println(cap(ch)) // 100
}注意，len 和 cap 并不是函数调用。编译后是直接去取 hchan 的 field 了。
被关闭的 channel 不能再向其中发送内容，否则会 panic
ch := make(chan int)
close(ch)
ch <- 1 // panic: send on closed channel注意，如果 close channel 时，有 sender goroutine 挂在 channel 的阻塞发送队列中，会导致 panic：
func main() {
ch := make(chan int)
go func() { ch <- 1 }() // panic: send on closed channel
time.Sleep(time.Second)
go func() { close(ch) }()
time.Sleep(time.Second)
x, ok := <-ch
fmt.Println(x, ok)
}close 一个 channel 会唤醒所有等待在该 channel 上的 g，并使其进入 Grunnable 状态，这时这些 writer goroutine 会发现该 channel 已经是 closed 状态，就 panic了。
在不确定是否还有 goroutine 需要向 channel 发送数据时，请勿贸然关闭 channel。
可以从已经 closed 的 channel 中接收值：
ch := make(chan int)
close(ch)
x := <-ch如果 channel 中有值，这里特指带 buffer 的 channel，那么就从 channel 中取，如果没有值，那么会返回 channel 元素的 0 值。
区分是返回的零值还是 buffer 中的值可使用 comma, ok 语法：
x, ok := <-ch若 ok 为 false，表明 channel 已被关闭，所得的是无效的值。
不进行初始化，即不调用 make 来赋值的 channel 称为 nil channel：
var a chan int关闭一个 nil channel 会直接 panic
var a chan int
close(a) // panic: close of nil channel一个 sender，多个 receiver，由 sender 来关闭 channel，通知数据已发送完毕。
一旦 sender 有多个，可能就无法判断数据是否完毕了。这时候可以借助外部额外 channel 来做信号广播。这种做法类似于 done channel，或者 stop channel。
如果确定不会有 goroutine 在通信过程中被阻塞，也可以不关闭 channel，等待 GC 对其进行回收。
hchan 是 channel 在 runtime 中的数据结构
// channel 在 runtime 中的结构体
type hchan struct {
// 队列中目前的元素计数
qcount uint // total data in the queue
// 环形队列的总大小，ch := make(chan int, 10) => 就是这里这个 10
dataqsiz uint // size of the circular queue
// void * 的内存 buffer 区域
buf unsafe.Pointer // points to an array of dataqsiz elements
// sizeof chan 中的数据
elemsize uint16
// 是否已被关闭
closed uint32
// runtime._type，代表 channel 中的元素类型的 runtime 结构体
elemtype *_type // element type
// 发送索引
sendx uint // send index
// 接收索引
recvx uint // receive index
// 接收 goroutine 对应的 sudog 队列
recvq waitq // list of recv waiters
// 发送 goroutine 对应的 sudog 队列
sendq waitq // list of send waiters
// lock protects all fields in hchan, as well as several
// fields in sudogs blocked on this channel.
//
// Do not change another G's status while holding this lock
// (in particular, do not ready a G), as this can deadlock
// with stack shrinking.
lock mutex
}// 初始化 channel
func makechan(t *chantype, size int) *hchan {
elem := t.elem
// compiler checks this but be safe.
if elem.size >= 1<<16 {
throw("makechan: invalid channel element type")
}
if hchanSize%maxAlign != 0 || elem.align > maxAlign {
throw("makechan: bad alignment")
}
if size < 0 || uintptr(size) > maxSliceCap(elem.size) || uintptr(size)*elem.size > _MaxMem-hchanSize {
panic(plainError("makechan: size out of range"))
}
// Hchan does not contain pointers interesting for GC when elements stored in buf do not contain pointers.
// buf points into the same allocation, elemtype is persistent.
// SudoG's are referenced from their owning thread so they can't be collected.
// 如果 hchan 中的元素不包含有指针，那么就没什么和 GC 相关的信息了
var c *hchan
// 可以学习一下这种空 switch 的写法，比 if else 好看一些
switch {
case size == 0 || elem.size == 0:
// 如果 channel 的缓冲区大小是 0: var a = make(chan int)
// 或者 channel 中的元素大小是 0: struct{}{}
// Queue or element size is zero.
c = (*hchan)(mallocgc(hchanSize, nil, true))
// Race detector uses this location for synchronization.
c.buf = unsafe.Pointer(c)
case elem.kind&kindNoPointers != 0:
// Elements do not contain pointers.
// Allocate hchan and buf in one call.
// 通过位运算知道 channel 中的元素不包含指针
// 占用的空间比较容易计算
// 直接用 元素数*元素大小 + channel 必须的空间就行了
// 这种情况下 gc 不会对 channel 中的元素进行 scan
c = (*hchan)(mallocgc(hchanSize+uintptr(size)*elem.size, nil, true))
c.buf = add(unsafe.Pointer(c), hchanSize)
default:
// Elements contain pointers.
// 和上面那个 case 的写法的区别:调用了两次分配空间的函数 new/mallocgc
c = new(hchan)
c.buf = mallocgc(uintptr(size)*elem.size, elem, true)
}
c.elemsize = uint16(elem.size)
c.elemtype = elem
c.dataqsiz = uint(size)
return c
}// entry point for c <- x from compiled code
// 英文写的比较明白了。。
//go:nosplit
func chansend1(c *hchan, elem unsafe.Pointer) {
chansend(c, elem, true, getcallerpc())
}
func chansend(c *hchan, ep unsafe.Pointer, block bool, callerpc uintptr) bool {
// 应用层的 channel 为空
// 例如 var a chan int
// a<-1
if c == nil {
if !block {
return false
}
// nil channel 发送数据会永远阻塞下去
// PS：注意，会发生 panic 那种情况是 channel 被 closed 了，不是 nil channel
// 挂起当前 goroutine
gopark(nil, nil, "chan send (nil chan)", traceEvGoStop, 2)
throw("unreachable")
}
// Fast path: check for failed non-blocking operation without acquiring the lock.
//
// After observing that the channel is not closed, we observe that the channel is
// not ready for sending. Each of these observations is a single word-sized read
// (first c.closed and second c.recvq.first or c.qcount depending on kind of channel).
// Because a closed channel cannot transition from 'ready for sending' to
// 'not ready for sending', even if the channel is closed between the two observations,
// they imply a moment between the two when the channel was both not yet closed
// and not ready for sending. We behave as if we observed the channel at that moment,
// and report that the send cannot proceed.
//
// It is okay if the reads are reordered here: if we observe that the channel is not
// ready for sending and then observe that it is not closed, that implies that the
// channel wasn't closed during the first observation.
if !block && c.closed == 0 && ((c.dataqsiz == 0 && c.recvq.first == nil) ||
(c.dataqsiz > 0 && c.qcount == c.dataqsiz)) {
return false
}
var t0 int64
if blockprofilerate > 0 {
t0 = cputicks()
}
lock(&c.lock)
// channel 已被关闭，panic
if c.closed != 0 {
unlock(&c.lock)
panic(plainError("send on closed channel"))
}
if sg := c.recvq.dequeue(); sg != nil {
// Found a waiting receiver. We pass the value we want to send
// directly to the receiver, bypassing the channel buffer (if any).
// 寻找一个等待中的 receiver
// 越过 channel 的 buffer
// 直接把要发的数据拷贝给这个 receiver
// 然后就返
send(c, sg, ep, func() { unlock(&c.lock) }, 3)
return true
}
// qcount 是 buffer 中已塞进的元素数量
// dataqsize 是 buffer 的总大小
// 说明还有余量
if c.qcount < c.dataqsiz {
// Space is available in the channel buffer. Enqueue the element to send.
qp := chanbuf(c, c.sendx)
// 将 goroutine 的数据拷贝到 buffer 中
typedmemmove(c.elemtype, qp, ep)
// 将发送 index 加一
c.sendx++
// 环形队列，所以如果已经加到最大了，就回 0
if c.sendx == c.dataqsiz {
c.sendx = 0
}
// 将 buffer 的元素计数 +1
c.qcount++
unlock(&c.lock)
return true
}
if !block {
unlock(&c.lock)
return false
}
// Block on the channel. Some receiver will complete our operation for us.
// 在 channel 上阻塞，receiver 会帮我们完成后续的工作
gp := getg()
mysg := acquireSudog()
mysg.releasetime = 0
if t0 != 0 {
mysg.releasetime = -1
}
// No stack splits between assigning elem and enqueuing mysg
// on gp.waiting where copystack can find it.
// 打包 sudog
mysg.elem = ep
mysg.waitlink = nil
mysg.g = gp
mysg.isSelect = false
mysg.c = c
gp.waiting = mysg
gp.param = nil
// 将当前这个发送 goroutine 打包后的 sudog 入队到 channel 的 sendq 队列中
c.sendq.enqueue(mysg)
// 将这个发送 g 从 Grunning -> Gwaiting
// 进入休眠
goparkunlock(&c.lock, "chan send", traceEvGoBlockSend, 3)
// someone woke us up.
// 这里是被唤醒后要执行的代码
if mysg != gp.waiting {
// 先判断当前是不是合法的休眠中
throw("G waiting list is corrupted")
}
gp.waiting = nil
if gp.param == nil {
if c.closed == 0 {
throw("chansend: spurious wakeup")
}
// 唤醒后发现 channel 被人关了，气啊
panic(plainError("send on closed channel"))
}
gp.param = nil
if mysg.releasetime > 0 {
blockevent(mysg.releasetime-t0, 2)
}
mysg.c = nil
releaseSudog(mysg)
return true
}
// send processes a send operation on an empty channel c.
// The value ep sent by the sender is copied to the receiver sg.
// The receiver is then woken up to go on its merry way.
// Channel c must be empty and locked. send unlocks c with unlockf.
// sg must already be dequeued from c.
// ep must be non-nil and point to the heap or the caller's stack.
// 英文已经说的比较明白了。。
func send(c *hchan, sg *sudog, ep unsafe.Pointer, unlockf func(), skip int) {
// receiver 的 sudog 已经在对应区域分配过空间
// 我们只要把数据拷贝过去
if sg.elem != nil {
sendDirect(c.elemtype, sg, ep)
sg.elem = nil
}
gp := sg.g
unlockf()
gp.param = unsafe.Pointer(sg)
if sg.releasetime != 0 {
sg.releasetime = cputicks()
}
// Gwaiting -> Grunnable
goready(gp, skip+1)
}// entry points for <- c from compiled code
//go:nosplit
func chanrecv1(c *hchan, elem unsafe.Pointer) {
chanrecv(c, elem, true)
}
//go:nosplit
func chanrecv2(c *hchan, elem unsafe.Pointer) (received bool) {
_, received = chanrecv(c, elem, true)
return
}
func chanrecv(c *hchan, ep unsafe.Pointer, block bool) (selected, received bool) {
// raceenabled: don't need to check ep, as it is always on the stack
// or is new memory allocated by reflect.
// 如果在 nil channel 上进行 recv 操作，那么会永远阻塞
if c == nil {
if !block {
// 非阻塞的情况下
// 要直接返回
// 非阻塞出现在一些 select 的场景中
// 参见 selectnbrecv/selectnbrecv2
return
}
// 当前 goroutine: Grunning -> Gwaiting
// 其实就是该 goroutine 直接泄露 leak 了
gopark(nil, nil, "chan receive (nil chan)", traceEvGoStop, 2)
// 放个 throw 有点莫名其妙
// 不过这段代码确实永远达到不了
throw("unreachable")
}
// Fast path: check for failed non-blocking operation without acquiring the lock.
//
// After observing that the channel is not ready for receiving, we observe that the
// channel is not closed. Each of these observations is a single word-sized read
// (first c.sendq.first or c.qcount, and second c.closed).
// Because a channel cannot be reopened, the later observation of the channel
// being not closed implies that it was also not closed at the moment of the
// first observation. We behave as if we observed the channel at that moment
// and report that the receive cannot proceed.
//
// The order of operations is important here: reversing the operations can lead to
// incorrect behavior when racing with a close.
if !block && (c.dataqsiz == 0 && c.sendq.first == nil ||
c.dataqsiz > 0 && atomic.Loaduint(&c.qcount) == 0) &&
atomic.Load(&c.closed) == 0 {
// 非阻塞且没内容可收的情况下要直接返回
// 两个 bool 的零值就是 false，false
return
}
var t0 int64
if blockprofilerate > 0 {
t0 = cputicks()
}
lock(&c.lock)
// 当前 channel 中没有数据可读
// 直接返回 not selected
if c.closed != 0 && c.qcount == 0 {
unlock(&c.lock)
if ep != nil {
typedmemclr(c.elemtype, ep)
}
return true, false
}
// sender 队列中有 sudog 在等待
// 直接从该 sudog 中获取数据拷贝到当前 g 即可
if sg := c.sendq.dequeue(); sg != nil {
// Found a waiting sender. If buffer is size 0, receive value
// directly from sender. Otherwise, receive from head of queue
// and add sender's value to the tail of the queue (both map to
// the same buffer slot because the queue is full).
recv(c, sg, ep, func() { unlock(&c.lock) }, 3)
return true, true
}
if c.qcount > 0 {
// Receive directly from queue
qp := chanbuf(c, c.recvx)
// 直接从 buffer 里拷贝数据
if ep != nil {
typedmemmove(c.elemtype, ep, qp)
}
typedmemclr(c.elemtype, qp)
// 接收索引 +1
c.recvx++
if c.recvx == c.dataqsiz {
c.recvx = 0
}
// buffer 元素计数 -1
c.qcount--
unlock(&c.lock)
return true, true
}
if !block {
unlock(&c.lock)
// 非阻塞时，且无数据可收
// 始终不选中，这是在 buffer 中没内容的时候
return false, false
}
// no sender available: block on this channel.
gp := getg()
mysg := acquireSudog()
mysg.releasetime = 0
if t0 != 0 {
mysg.releasetime = -1
}
// No stack splits between assigning elem and enqueuing mysg
// on gp.waiting where copystack can find it.
// 打包成 sudog
mysg.elem = ep
mysg.waitlink = nil
gp.waiting = mysg
mysg.g = gp
mysg.isSelect = false
mysg.c = c
gp.param = nil
// 进入 recvq 队列
c.recvq.enqueue(mysg)
// Grunning -> Gwaiting
goparkunlock(&c.lock, "chan receive", traceEvGoBlockRecv, 3)
// someone woke us up
// 被唤醒
if mysg != gp.waiting {
throw("G waiting list is corrupted")
}
gp.waiting = nil
if mysg.releasetime > 0 {
blockevent(mysg.releasetime-t0, 2)
}
closed := gp.param == nil
gp.param = nil
mysg.c = nil
releaseSudog(mysg)
// 如果 channel 未被关闭，那就是真的 recv 到数据了
return true, !closed
}
// recv processes a receive operation on a full channel c.
// There are 2 parts:
// 1) The value sent by the sender sg is put into the channel
// and the sender is woken up to go on its merry way.
// 2) The value received by the receiver (the current G) is
// written to ep.
// For synchronous channels, both values are the same.
// For asynchronous channels, the receiver gets its data from
// the channel buffer and the sender's data is put in the
// channel buffer.
// Channel c must be full and locked. recv unlocks c with unlockf.
// sg must already be dequeued from c.
// A non-nil ep must point to the heap or the caller's stack.
func recv(c *hchan, sg *sudog, ep unsafe.Pointer, unlockf func(), skip int) {
if c.dataqsiz == 0 {
if ep != nil {
// copy data from sender
recvDirect(c.elemtype, sg, ep)
}
} else {
// Queue is full. Take the item at the
// head of the queue. Make the sender enqueue
// its item at the tail of the queue. Since the
// queue is full, those are both the same slot.
qp := chanbuf(c, c.recvx)
// copy data from queue to receiver
// 英文写的很明白
if ep != nil {
typedmemmove(c.elemtype, ep, qp)
}
// copy data from sender to queue
// 英文写的很明白
typedmemmove(c.elemtype, qp, sg.elem)
c.recvx++
if c.recvx == c.dataqsiz {
c.recvx = 0
}
c.sendx = c.recvx // c.sendx = (c.sendx+1) % c.dataqsiz
}
sg.elem = nil
gp := sg.g
unlockf()
gp.param = unsafe.Pointer(sg)
if sg.releasetime != 0 {
sg.releasetime = cputicks()
}
// Gwaiting -> Grunnable
goready(gp, skip+1)
}func closechan(c *hchan) {
// 关闭一个 nil channel 会直接 panic
if c == nil {
panic(plainError("close of nil channel"))
}
// 上锁，这个锁的粒度比较大，一直到释放完所有的 sudog 才解锁
lock(&c.lock)
// 在 close channel 时，如果 channel 已经关闭过了
// 直接触发 panic
if c.closed != 0 {
unlock(&c.lock)
panic(plainError("close of closed channel"))
}
c.closed = 1
var glist *g
// release all readers
for {
sg := c.recvq.dequeue()
// 弹出的 sudog 是 nil
// 说明读队列已经空了
if sg == nil {
break
}
// sg.elem unsafe.Pointer，指向 sudog 的数据元素
// 该元素可能在堆上分配，也可能在栈上
if sg.elem != nil {
// 释放对应的内存
typedmemclr(c.elemtype, sg.elem)
sg.elem = nil
}
if sg.releasetime != 0 {
sg.releasetime = cputicks()
}
// 将 goroutine 入 glist
// 为最后将全部 goroutine 都 ready 做准备
gp := sg.g
gp.param = nil
gp.schedlink.set(glist)
glist = gp
}
// release all writers (they will panic)
// 将所有挂在 channel 上的 writer 从 sendq 中弹出
// 该操作会使所有 writer panic
for {
sg := c.sendq.dequeue()
if sg == nil {
break
}
sg.elem = nil
if sg.releasetime != 0 {
sg.releasetime = cputicks()
}
// 将 goroutine 入 glist
// 为最后将全部 goroutine 都 ready 做准备
gp := sg.g
gp.param = nil
gp.schedlink.set(glist)
glist = gp
}
// 在释放所有挂在 channel 上的读或写 sudog 时
// 是一直在临界区的
unlock(&c.lock)
// Ready all Gs now that we've dropped the channel lock.
for glist != nil {
gp := glist
glist = glist.schedlink.ptr()
gp.schedlink = 0
// 使 g 的状态切换到 Grunnable
goready(gp, 3)
}
}