Is there a way to log UDS data and apply equations?

[JoeBargo]

Using this as the Tx (7e0):

Raw Payload: 0x22 0x03 0x34 

UDS Request
Service: Read data by ID

ID to read: 0x0334

And the Rx (7e8):

Raw Payload: 0x62 0x03 0x34 0x16 0x28 

UDS Positive Response
Service: Read data by ID
Reply is non-standard and so no decoding is done. The format is (ID) followed by how ever much data that ID returns, followed by more ID/data pairs if applicable.
Payload: 0x03 0x34 0x16 0x28 

Is there anyway to log this data by ID 0x0334 and apply equations (decoding)?

[collin80]

There is not currently a good way to do this. It may be possible to use the first few bytes as a DBC multiplexor then have 0x334 as the multiplex value and decode it via the DBC interface. Otherwise, no, there isn't a way in SavvyCAN.

[JoeBargo]

Thanks for the quick response.