- Print Settings
I recommend that you print in eSun PLA+, any material should work so long as you can account for warp.
- Nozzle Temp - 230C
- Bed Temp - 60C
- Brim - ON
- Supports - NONE
- Layer Height - 0.15mm
- Shells (aka perimeters) - 4 inner/outer (this may not be necessary, but works well for me)
- Bed prep - Gluestick, optionally on top of Kapton Tape.
Want to join the movement? Head over to keybase.io/team/det_disp.