Squelch at SSB

[S52CQ]

UHSDR Firmware Defect Issue (Bug) Template 1.1

Please fill out the appropriate values. Remove inapproriate/irrelevant values, but be prepare to provide more data. This template contains the most often asked questions.
We may adjust the template over time.

Please give as much information as necessary. At the same time, try to be concise. If you want to report something else than a defect, consider using a forum first. If you want report anything else but a defect remove the template if it does not make sense for your issue. Thank you!

Issue Data goes here (please remove text above):

Your firmware version:2.11.62 and 2.11.67
Your bootloader version: 5.0.2
(Please note, we will generally not accept issue reports if your bootloader is not at least 5.0.1)

Hardware

• UI Board: mcHF 0.5
• RF Board: mcHF 0.5

Describe the issue:

Hi,

I was wondering if we can add Squelch function to SSB too? I see in the SW that FM subaudible tone is used to detect signal, in SSB there is no such tone, so I wonder if Squelch in present SW can be performed?

73 de S52CQ, Jure

[db4ple]

FM there is a squelch based on a calculation of the power of the modulated FM signal.
In addition there is the subtone detection option, which can replace the squelch based on the signal power. So there are two different "squelch"approaches.
If any of these would work in SSB reliablyI don't know.