lightswitch.yaml

substitutions:
  device_name: lightswitch

esphome:
  name: lightswitch
  friendly_name: lightswitch

external_components:
  - source: github://ayufan/esphome-components

drv2605:
  id: haptic
  rated_voltage: 1.8V
  resonant_frequency: 205Hz

esp32:
#  board: wesp32
  board: esp32-poe-iso
# framework:
#   type: esp-idf
#   version: recommended
  framework:
    type: arduino

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:

ota:
  password: ""

wifi:
  ssid: 74ax4k
  password: twosigma
    #ethernet:
    #  type: LAN8720
    #  mdc_pin: GPIO23
    #  mdio_pin: GPIO18
    #  clk_mode: GPIO17_OUT
    #  phy_addr: 0
    #  power_pin: GPIO12
    #  manual_ip:
    #    static_ip: 192.168.20.70
    #    gateway: 192.168.20.1
    #    subnet: 255.255.255.0
    #  use_address: 192.168.20.70

i2c:
  scl: GPIO16
  sda: GPIO13
  scan: true
  id: i2c_bus

memory: # from ayufan/esphome-components; periodically prints free memory

i2s_audio:
  #  - id: i2s_mic
  #    i2s_lrclk_pin: GPIO4
  - id: i2s_amp
    i2s_lrclk_pin: GPIO2
    i2s_bclk_pin: GPIO14

microphone:
  - platform: i2s_audio
    i2s_din_pin: GPIO35
    adc_type: external
    pdm: true
    id: mic_id
      #    i2s_audio_id: i2s_mic
    i2s_audio_id: i2s_amp

voice_assistant:
  microphone: mic_id
  speaker: amp_id
  on_start:
    then:
    - output.turn_on: amp_en
    - drv2605.fire_haptic:
        id: haptic
        waveform: 27
  on_error:
    then:
    - drv2605.fire_haptic:
        id: haptic
        waveform: 56
  on_end:
    then:
    - output.turn_off: amp_en
    - drv2605.fire_haptic:
        id: haptic
        waveform: 44

speaker:
  - platform: i2s_audio
    dac_type: external
    i2s_dout_pin: GPIO3
    mode: mono
    id: amp_id
    i2s_audio_id: i2s_amp

      #media_player:
      #  - platform: i2s_audio
      #    name: ESPHome I2S Media Player
      #    dac_type: external
      #    i2s_dout_pin: GPIO3
      #    i2s_audio_id: i2s_amp
      #    mode: mono
      #    on_play:
      #      output.turn_on: amp_en
      #    on_pause:
      #      output.turn_off: amp_en
      #    on_idle:
      #      output.turn_off: amp_en

number:
  - platform: template
    name: waveform of choice press
    id: wv_o_c
    min_value: 1
    max_value: 255
    step: 1
    optimistic: true
  - platform: template
    name: waveform of choice release
    id: wv_o_c2
    min_value: 1
    max_value: 255
    step: 1
    optimistic: true

output:
  - platform: gpio
    pin: GPIO32
    id: ntc_vcc
  - platform: gpio
    pin:
      number: GPIO4
      mode: OUTPUT_OPEN_DRAIN
    id: amp_en

light:
  - platform: neopixelbus
    type: GRB
    variant: SK6812
    pin: GPIO15
    num_leds: 42
    internal: true
    id: led_pixels
    color_correct: [40%, 40%, 40% ] # limit max brightness
  - platform: partition
    name: Light Divider
    segments:
      - id: led_pixels
        from: 10
        to: 14
    effects:
      - addressable_twinkle:
      - addressable_flicker:
      - addressable_fireworks:
  - platform: partition
    name: Environment Divider
    segments:
      - id: led_pixels
        from: 23
        to: 31
    effects:
      - addressable_twinkle:
      - addressable_flicker:
      - addressable_fireworks:
  - platform: partition
    name: Vertical Line
    segments:
      - id: led_pixels
        from: 0
        to: 9
      - id: led_pixels
        from: 15
        to: 22
      - id: led_pixels
        from: 32
        to: 41
    effects:
      - addressable_twinkle:
      - addressable_flicker:
      - addressable_fireworks:


mpr121:
  id: mpr121_
  address: 0x5C
  touch_debounce: 1
  release_debounce: 1
  touch_threshold: 10
  release_threshold: 7

button:
  - platform: restart
    name: Restart device
    id: restart_internal
    entity_category: config 
  - platform: safe_mode
    name: Safe Mode Boot
    entity_category: diagnostic
  - platform: template
    name: Reset DRV2605L
    entity_category: diagnostic
    on_press:
      then:
        - drv2605.reset:
            id: haptic
  - platform: template
    name: Calibrate DRV2605L
    entity_category: diagnostic
    on_press:
      then:
        - drv2605.calibrate:
            id: haptic

binary_sensor:
  - platform: gpio
    name: physical button
    pin: 
      number: GPIO34
      inverted: true
        #    on_press:
        #      then:
        #        - voice_assistant.start:
        #    on_release:
        #      then:
        #        - voice_assistant.stop:
  - platform: gpio
    name: LED Power Fault
    pin: GPIO36
  - platform: mpr121
    id: button_bottom_left
    channel: 0
    name: Light down
    on_press:
      then:
        - drv2605.fire_haptic:
            id: haptic
            waveform: !lambda return id(wv_o_c).state;
    on_release:
      then:
        - drv2605.fire_haptic:
            id: haptic
            waveform: !lambda return id(wv_o_c2).state;
  - platform: mpr121
    id: button_top_left
    channel: 1
    name: Light up
    on_press:
      then:
        - drv2605.fire_haptic:
            id: haptic
            waveform: 4
  - platform: mpr121
    id: button_bottom_right
    channel: 2
    name: Environment down
    on_press:
      then:
        - drv2605.fire_haptic:
            id: haptic
            waveform: 7
  - platform: mpr121
    id: button_top_right
    channel: 3
    name: Environment up
    on_press:
      then:
        - voice_assistant.start:
    on_release:
      then:
        - voice_assistant.stop:
        #         - drv2605.fire_haptic:
        #             id: haptic
        #             waveform: 54
  - platform: mpr121
    id: button_proximity
    channel: 12
    name: Proximity
      #     touch_threshold: 5
      #     release_threshold: 5
  - platform: status
    name: "${device_name} Status"


bme680_bsec:

sensor:
  - platform: bme680_bsec
    temperature:
      name: "BME680 Temperature"
    pressure:
      name: "BME680 Pressure"
    humidity:
      name: "BME680 Humidity"
    iaq:
      name: "BME680 IAQ"
      id: iaq
    co2_equivalent:
      name: "BME680 CO2 Equivalent"
    breath_voc_equivalent:
      name: "BME680 Breath VOC Equivalent"

  - platform: bh1750
    name: "BH1750 Illuminance"
    address: 0x23
    update_interval: 60s

  - platform: ntc
    name: "Board temperature"
    sensor: board_temp_resistance
    entity_category: diagnostic
    calibration:
      b_constant: 3435
      reference_temperature: 25C
      reference_resistance: 10kOhm
  - platform: resistance
    id: board_temp_resistance
    sensor: board_temp_source
    configuration: UPSTREAM
    resistor: 10kOhm
  - platform: adc
    pin: GPIO33
    id: board_temp_source
    update_interval: never
    attenuation: 11db
    internal: true

interval:
  - interval: 30s
    then:
      - output.turn_on: ntc_vcc
      - component.update: board_temp_source
      - output.turn_off: ntc_vcc

text_sensor:
  - platform: bme680_bsec
    iaq_accuracy:
      name: "BME680 IAQ Accuracy"

  - platform: template
    name: "BME680 IAQ Classification"
    icon: "mdi:checkbox-marked-circle-outline"
    lambda: |-
      if ( int(id(iaq).state) <= 50) {
        return {"Excellent"};
      }
      else if (int(id(iaq).state) >= 51 && int(id(iaq).state) <= 100) {
        return {"Good"};
      }
      else if (int(id(iaq).state) >= 101 && int(id(iaq).state) <= 150) {
        return {"Lightly polluted"};
      }
      else if (int(id(iaq).state) >= 151 && int(id(iaq).state) <= 200) {
        return {"Moderately polluted"};
      }
      else if (int(id(iaq).state) >= 201 && int(id(iaq).state) <= 250) {
        return {"Heavily polluted"};
      }
      else if (int(id(iaq).state) >= 251 && int(id(iaq).state) <= 350) {
        return {"Severely polluted"};
      }
      else if (int(id(iaq).state) >= 351) {
        return {"Extremely polluted"};
      }
      else {
        return {"error"};
      }